IEEE C802.16m-10/1069r1
Project
IEEE 802.16 Broadband Wireless Access Working Group <http://ieee802.org/16>
Title
Suggested Table Format for Misc 802.16m MAC Control Message
Date
Submitted
2010-08-12
Source(s)
Hyunjeong Kang, Jaehyuk Jang
Samsung Electronics
Re:
P802.16m/D6
Abstract
Suggested Table Format for Misc 802.16m MAC Control Message (AAI_L2-xfer, AAI_MSGACK, and AAI_RES-CMD)
Purpose
For TGm discussion and adoption into P802.16m/D7
Notice
Release
Patent
Policy
jack.jang@samsung.com
This document does not represent the agreed views of the IEEE 802.16 Working Group or any of its subgroups. It
represents only the views of the participants listed in the “Source(s)” field above. It is offered as a basis for
discussion. It is not binding on the contributor(s), who reserve(s) the right to add, amend or withdraw material
contained herein.
The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution,
and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEE’s name
any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s sole
discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The
contributor also acknowledges and accepts that this contribution may be made public by IEEE 802.16.
The contributor is familiar with the IEEE-SA Patent Policy and Procedures:
<http://standards.ieee.org/guides/bylaws/sect6-7.html#6> and
<http://standards.ieee.org/guides/opman/sect6.html#6.3>.
Further information is located at <http://standards.ieee.org/board/pat/pat-material.html> and
<http://standards.ieee.org/board/pat>.
Suggested Table Format for Misc 802.16m MAC Control Message
Hyunjeong Kang, Jaehyuk Jang
Samsung Electronics
Introduction
This contribution provides updated table format for the AAI_L2-xfer, AAI_MSG-ACK, and AAI_RES-CMD
messages.
Proposed Remedy
Adopt the following three remedies.
{Remedy #1: Replace Table 713 in pp. 156, line 1 with the following Table}
Table 713—AAI_L2-XFER MAC Control Message Format
Field
Size (bit)
Value/Description
1
Condition
IEEE C802.16m-10/1069r1
MAC Control Message Type
8
AAI_L2-XFER
L2-Xfer Type
8
Transfer-Type = 1; GNSS assistance (DL)
Transfer-Type = 2; LBS measurement
[Terrestrial meas. and GNSS pseudo
ranges] (UL)
Transfer-Type = 3; Device Bootstrap
(DL/UL)
Transfer-Type = 4; WirelessMANOFDMA network boundary indication
(DL)
Transfer-Type = 5; ORAT-MSG (DL)
Transfer-Type = 6: SMS
Transfer-Type = 7: MIH Frame
Transfer-Type = 8; ASN control messages
for Relay support (DL/UL)
Transfer-Type = 9; Emergency Alert
Transfer-Type = 10-127; reserved
Transfer-Type = 128-255; Vendor specific
types
4
Sub-Type = 1: GERAN
(GSM/GPRS/EGPRS)
Sub-Type = 2: UTRAN
Sub-Type = 3: E-UTRAN
Sub-Type = 4: TDSCDMA
Sub-Type = 5: CDMA2000
4
Sub-Type = 1: SMS data
Sub-Type = 2: SMS confirmation
4
Sub-Type = 1: ES/CS MIH Capability
Discovery
Sub-Type = 2: Event Service
Sub-Type = 3: Command Service
Sub-Type = 4: Information Service
If (Transfer-Type == 5) {
L2-Xfer SubType
L2-Xfer Payload
} else if (Transfer-Type == 6) {
L2-Xfer SubType
L2-Xfer Payload
} else if (Transfer-Type == 7) {
L2-Xfer SubType
L2-Xfer Payload
} else {
L2-Xfer Payload
}
{ Remedy #2: Replace Table 719 in pp. 168, line 1 with the following Table}
Table 719—AAI_MSG-ACK MAC Control Message Format
Field
Size (bit)
Value/Description
MAC Control Message Type
8
AAI_MSG-ACK
ACK_SN
6
SN retrieved from MCEH of the received
MAC PDU.
2
Condition
IEEE C802.16m-10/1069r1
CCC ID
1
Control Connection Channel ID (CCC ID)
that the MAC management message is
received.
{ Remedy #3: Replace Table 713 in pp. 216, line 9 with the following Table}
Table 751—AAI_RES-CMD MAC Control Message Format
Field
MAC Control Message Type
Size (bit)
8
Value/Description
Condition
AMS reset command
---------------------------------------------------------Start of the Text-----------------------------------------------------------
3