Introduction to Parallel Processing Why? • Parallel Computer Architecture:

advertisement
Introduction to Parallel Processing
•
Parallel Computer Architecture: Definition & Broad issues involved
–
•
The Need And Feasibility of Parallel Computing
–
–
–
•
•
•
•
Parallel Programming Models
Flynn’s 1972 Classification of Computer Architecture
Current Trends In Parallel Architectures
–
•
•
•
•
•
Why?
Scientific Supercomputing Trends
CPU Performance and Technology Trends, Parallelism in Microprocessor Generations
Computer System Peak FLOP Rating History/Near Future
The Goal of Parallel Processing
Elements of Parallel Computing
Factors Affecting Parallel System Performance
Parallel Architectures History
–
–
•
A Generic Parallel Computer Architecture
Modern Parallel Architecture Layered Framework
Shared Address Space Parallel Architectures
Message-Passing Multicomputers: Message-Passing Programming Tools
Data Parallel Systems
Dataflow Architectures
Systolic Architectures: Matrix Multiplication Systolic Array Example
PCA Chapter 1.1, 1.2
CMPE655 - Shaaban
#1 lec # 1 Fall 2014 8-26-2014
Parallel Computer Architecture
A parallel computer (or multiple processor system) is a collection of
communicating processing elements (processors) that cooperate to solve
large computational problems fast by dividing such problems into parallel
tasks, exploiting Thread-Level Parallelism (TLP). i.e Parallel Processing
•
Broad issues involved:
Task = Computation done on one processor
– The concurrency and communication characteristics of parallel algorithms for a given
computational problem (represented by dependency graphs)
– Computing Resources and Computation Allocation:
• The number of processing elements (PEs), computing power of each element and
amount/organization of physical memory used.
• What portions of the computation and data are allocated or mapped to each PE.
– Data access, Communication and Synchronization
•
•
•
•
How the processing elements cooperate and communicate.
How data is shared/transmitted between processors.
Abstractions and primitives for cooperation/communication and synchronization.
The characteristics and performance of parallel system network (System interconnects).
– Parallel Processing Performance and Scalability Goals:
• Maximize performance enhancement of parallelism: Maximize Speedup.
Goals
– By minimizing parallelization overheads and balancing workload on processors
• Scalability of performance to larger systems/problems.
Processor = Programmable computing element that runs stored programs written
using pre-defined instruction set
Processing Elements = PEs = Processors
CMPE655 - Shaaban
#2 lec # 1 Fall 2014 8-26-2014
A Generic Parallel Computer Architecture
2
Parallel Machine Network
(Custom or industry standard)
Netw ork
Interconnects

1
Processing (compute)
nodes
Communication
assist (CA)
Mem
Operating System
Parallel Programming
Environments
Processing Nodes
Network Interface AKA Communication Assist (CA)
(custom or industry standard)
$
P
2-8 cores per chip
One or more processing elements or processors
per node: Custom or commercial microprocessors.
Single or multiple processors per chip
Homogenous or heterogonous
1
Processing Nodes:
2
Parallel machine network (System Interconnects).
Each processing node contains one or more processing elements (PEs) or
processor(s), memory system, plus communication assist: (Network interface and
communication controller)
Function of a parallel machine network is to efficiently (reduce communication
cost) transfer information (data, results .. ) from source node to destination node
as needed to allow cooperation among parallel processing nodes to solve large
computational problems divided into a number parallel computational tasks.
Parallel Computer = Multiple Processor System
CMPE655 - Shaaban
#3 lec # 1 Fall 2014 8-26-2014
The Need And Feasibility of Parallel Computing
• Application demands: More computing cycles/memory needed
Driving
Force
–
–
–
Scientific/Engineering computing: CFD, Biology, Chemistry, Physics, ...
General-purpose computing: Video, Graphics, CAD, Databases, Transaction Processing,
Gaming…
Mainstream multithreaded programs, are similar to parallel programs
• Technology Trends:
–
–
Number of transistors on chip growing rapidly. Clock rates expected to continue to go up but
only slowly. Actual performance returns diminishing due to deeper pipelines.
Increased transistor density allows integrating multiple processor cores per creating ChipMultiprocessors (CMPs) even for mainstream computing applications (desktop/laptop..).
• Architecture Trends:
–
–
–
+ multi-tasking (multiple independent programs)
Instruction-level parallelism (ILP) is valuable (superscalar, VLIW) but limited.
Increased clock rates require deeper pipelines with longer latencies and higher CPIs.
Coarser-level parallelism (at the task or thread level, TLP), utilized in multiprocessor systems
is the most viable approach to further improve performance.
Multi-core
• Main motivation for development of chip-multiprocessors (CMPs)
• Economics:
–
Moore’s Law still alive
Processors
The increased utilization of commodity of-the-shelf (COTS) components in high performance
parallel computing systems instead of costly custom components used in traditional
supercomputers leading to much lower parallel system cost.
• Today’s microprocessors offer high-performance and have multiprocessor support
eliminating the need for designing expensive custom Pes.
• Commercial System Area Networks (SANs) offer an alternative to custom more costly
networks
CMPE655 - Shaaban
#4 lec # 1 Fall 2014 8-26-2014
Why is Parallel Processing Needed?
Challenging Applications in Applied Science/Engineering
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Traditional Driving Force For HPC/Parallel Processing
Astrophysics
Atmospheric and Ocean Modeling
Such applications have very high
Bioinformatics
1- computational and 2- data memory
Biomolecular simulation: Protein folding
requirements that cannot be met
Computational Chemistry
with single-processor architectures.
Computational Fluid Dynamics (CFD)
Many applications contain a large
degree of computational parallelism
Computational Physics
Computer vision and image understanding
Data Mining and Data-intensive Computing
Engineering analysis (CAD/CAM)
Global climate modeling and forecasting
Material Sciences
Military applications
Driving force for High Performance Computing (HPC)
Quantum chemistry
and multiple processor system development
VLSI design
….
CMPE655 - Shaaban
#5 lec # 1 Fall 2014 8-26-2014
Why is Parallel Processing Needed?
Scientific Computing Demands
Driving force for HPC and multiple processor system development
(Memory Requirement)
Computational and memory
demands exceed the capabilities
of even the fastest current
uniprocessor systems
5-16 GFLOPS
for uniprocessor
GLOP = 109 FLOPS TeraFLOP = 1000 GFLOPS = 1012 FLOPS
PetaFLOP = 1000 TeraFLOPS = 1015 FLOPS
CMPE655 - Shaaban
#6 lec # 1 Fall 2014 8-26-2014
Scientific Supercomputing Trends
• Proving ground and driver for innovative architecture and advanced
high performance computing (HPC) techniques:
– Market is much smaller relative to commercial (desktop/server)
segment.
– Dominated by costly vector machines starting in the 1970s through
the 1980s.
– Microprocessors have made huge gains in the performance needed
for such applications:
Enabled with high
transistor density/chip
•
•
•
•
•
High clock rates. (Bad: Higher CPI?)
Multiple pipelined floating point units.
Instruction-level parallelism.
Effective use of caches.
Multiple processor cores/chip (2 cores 2002-2005, 4 end of 2006, 6-12 cores
2011) 16 cores in 2013
However even the fastest current single microprocessor systems
still cannot meet the needed computational demands. As shown in last slide
•
Currently: Large-scale microprocessor-based multiprocessor systems and
computer clusters are replacing (replaced?) vector supercomputers that utilize
custom processors.
CMPE655 - Shaaban
#7 lec # 1 Fall 2014 8-26-2014
Uniprocessor Performance Evaluation
•
•
•
CPU Performance benchmarking is heavily program-mix dependent.
Ideal performance requires a perfect machine/program match.
Performance measures:
– Total CPU time = T = TC / f = TC x C = I x CPI x C
= I x (CPIexecution + M x k) x C
(in seconds)
TC = Total program execution clock cycles
f = clock rate
C = CPU clock cycle time = 1/f
I = Instructions executed count
CPI = Cycles per instruction
CPIexecution = CPI with ideal memory
M = Memory stall cycles per memory access
k = Memory accesses per instruction
– MIPS Rating = I / (T x 106) = f / (CPI x 106) = f x I /(TC x 106)
(in million instructions per second)
– Throughput Rate: Wp = 1/ T = f /(I x CPI) = (MIPS) x 106 /I
(in programs per second)
•
Performance factors: (I, CPIexecution, m, k, C) are influenced by: instruction-set
architecture (ISA) , compiler design, CPU micro-architecture, implementation
and control, cache and memory hierarchy, program access locality, and
program instruction mix and instruction dependencies.
T = I x CPI x C
CMPE655 - Shaaban
#8 lec # 1 Fall 2014 8-26-2014
Single CPU Performance Trends
• The microprocessor is currently the most natural building block for
multiprocessor systems in terms of cost and performance.
• This is even more true with the development of cost-effective multi-core
microprocessors that support TLP at the chip level.
100
Supercomputers
Performance
Custom
Processors
10
Mainframes
Microprocessors
Minicomputers
Commodity
Processors
1
0.1
1965
1970
1975
1980
1985
1990
1995
CMPE655 - Shaaban
#9 lec # 1 Fall 2014 8-26-2014
Microprocessor Frequency Trend
100
Intel
Processor freq
scales by 2X per
generation
IBM Power PC
DEC
Gate delays/clock
21264S
1,000
Mhz
21164A
21264
Pentium(R)
21064A
21164
II
21066
MPC750
604
604+
10
Pentium Pro
601, 603 (R)
Pentium(R)
100
486
386
No longer
the case
2005
2003
2001
1999
1997
1995
1993
1991
1989
1
1987
10
• Frequency doubles each generation ?
• Number of gates/clock reduce by 25%
• Leads to deeper pipelines with more stages
(e.g Intel Pentium 4E has 30+ pipeline stages)
T = I x CPI x C
Gate Delays/ Clock
10,000
Realty Check:
Clock frequency scaling
is slowing down!
(Did silicone finally hit
the wall?)
Why?
1- Static power leakage
2- Clock distribution
delays
Result:
Deeper Pipelines
Longer stalls
Higher CPI
(lowers effective
performance
per cycle)
Solution:
Exploit TLP at the chip level,
Chip-multiprocessor (CMPs)
CMPE655 - Shaaban
#10 lec # 1 Fall 2014 8-26-2014
Transistor Count Growth Rate
Enabling Technology for Chip-Level Thread-Level Parallelism (TLP)
~ 3,000,000x transistor density increase in the last 40 years
Currently ~ 7 Billion
Moore’s Law:
2X transistors/Chip
Every 1.5 years
(circa 1970)
still holds
Enables Thread-Level
Parallelism (TLP) at the chip
level:
Chip-Multiprocessors (CMPs)
+ Simultaneous Multithreaded
(SMT) processors
Intel 4004
(2300 transistors)
Solution
• One billion transistors/chip reached in 2005, two billion in 2008-9, Now ~ seven billion
• Transistor count grows faster than clock rate: Currently ~ 40% per year
• Single-threaded uniprocessors do not efficiently utilize the increased transistor count.
Limited ILP, increased size of cache
CMPE655 - Shaaban
#11 lec # 1 Fall 2014 8-26-2014
Parallelism in Microprocessor VLSI Generations
Bit-level parallelism
Instruction-level
100,000,000
Thread-level (?)
(ILP)
Multiple micro-operations
per cycle
Single-issue
(multi-cycle non-pipelined) Pipelined
AKA operation
level parallelism
(TLP)

Superscalar
/VLIW
CPI <1
CPI =1
10,000,000




Not Pipelined
CPI >> 1


1,000,000


R10000




 










Simultaneous
Multithreading SMT:
e.g. Intel’s Hyper-threading
Chip-Multiprocessors (CMPs)
e.g IBM Power 4, 5
Intel Pentium D, Core Duo
AMD Athlon 64 X2
Dual Core Opteron
Sun UltraSparc T1 (Niagara)
Pentium
Transistors


 i80386

Chip-Level
TLP/Parallel
Processing


i80286 
100,000

 R2000


 R3000
Even more important
due to slowing clock
rate increase
 i8086
10,000
 i8080
 i8008

ILP = Instruction-Level Parallelism
TLP = Thread-Level Parallelism
Single Thread
 i4004
Per Chip
1,000
1970
1975
1980
1985
Improving microprocessor generation performance by
exploiting more levels of parallelism
1990
1995
2000
2005
CMPE655 - Shaaban
#12 lec # 1 Fall 2014 8-26-2014
Dual-Core Chip-Multiprocessor (CMP) Architectures
Single Die
Shared L2 Cache
Single Die
Private Caches
Shared System Interface
Two Dies – Shared Package
Private Caches
Private System Interface
Shared
L2 or L3
On-chip crossbar/switch
Cores communicate using shared cache
(Lowest communication latency)
Examples:
IBM POWER4/5
Intel Pentium Core Duo (Yonah), Conroe
(Core 2), i7, Sun UltraSparc T1 (Niagara)
AMD Phenom ….
Cores communicate using on-chip
Interconnects (shared system interface)
FSB
Cores communicate over external
Front Side Bus (FSB)
(Highest communication latency)
Examples:
AMD Dual Core Opteron,
Athlon 64 X2
Intel Itanium2 (Montecito)
Source: Real World Technologies,
http://www.realworldtech.com/page.cfm?ArticleID=RWT101405234615
Examples:
Intel Pentium D,
Intel Quad core (two dual-core chips)
CMPE655 - Shaaban
#13 lec # 1 Fall 2014 8-26-2014
Example Six-Core CMP: AMD Phenom II X6
Six processor cores sharing 6 MB of level 3 (L3) cache
CMP = Chip-Multiprocessor
CMPE655 - Shaaban
#14 lec # 1 Fall 2014 8-26-2014
Example Eight-Core CMP: Intel Nehalem-EX
Eight processor cores sharing 24 MB of level 3 (L3) cache
Each core is 2-way SMT (2 threads per core), for a total of 16 threads
CMPE655 - Shaaban
#15 lec # 1 Fall 2014 8-26-2014
Example 100-Core CMP: Tilera TILE-Gx Processor
No shared cache
Communication Links
On-Chip
Network
Switch
Network-on-Chip (NoC)
Example
For more information see: http://www.tilera.com/
CMPE655 - Shaaban
#16 lec # 1 Fall 2014 8-26-2014
Microprocessors Vs. Vector Processors
Uniprocessor Performance: LINPACK
10,000
CRAY
 CRAY
 Micro
Micro
n = 1,000
n = 100
n = 1,000
n = 100
Now about
5-16 GFLOPS
per microprocessor core
Vector Processors

1,000

1 GFLOP

C90
(109 FLOPS)
LINPACK (MFLOPS)
T94



100




DEC 8200

Ymp

Xmp/416



 
 IBM Pow er2/990
MIPS R4400
Xmp/14se


DEC Alpha
 HP9000/735

 DEC Alpha AXP
 HP 9000/750
 CRAY 1s
 IBM RS6000/540
10

MIPS M/2000

Microprocessors

MIPS M/120

Sun 4/260
1
1975


1980
1985
1990
1995
2000
CMPE655 - Shaaban
#17 lec # 1 Fall 2014 8-26-2014
Parallel Performance: LINPACK
Since ~ June 2013
Current Top LINPACK Performance:
10,000
 MPP peak
 CRAY peak
Now about 33,862,700 GFlop/s = 33,862.7 TeraFlops/s = 33.86 PetaFlops/s
Tianhe-2 (MilkyWay-2) ( @ National University of Defense Technology, Changsha, China)
3,120,000 total processor cores:
384,000 Intel Xeon cores (32,000 Xeon E5-2692 12-core processors @ 2.2 GHz) +
2,736,000 Intel Xeon Phi cores (48,000 Xeon Phi 31S1P 57-core processors @ 1.1 GHz)
LINPACK (GFLOPS)
1,000
ASCI Red 
1 TeraFLOP
(1012
Paragon XP/S MP
(6768)

Paragon XP/S MP
(1024) 
 T3D
CM-5 
FLOPS = 1000 GFLOPS)
100
T932(32) 
Paragon XP/S
CM-200 
CM-2 
Ymp/832(8)
1

 C90(16)
Delta
10


 iPSC/860
 nCUBE/2(1024)
Xmp /416(4)
GLOP = 109 FLOPS TeraFLOP = 1000 GFLOPS = 1012 FLOPS
PetaFLOP = 1000 TeraFLOPS = 10 15 FLOPS
0.1
1985
1987
1989
1991
1993
Current ranking of top 500 parallel supercomputers
in the world is found at: www.top500.org
1995
1996
CMPE655 - Shaaban
#18 lec # 1 Fall 2014 8-26-2014
Why is Parallel Processing Needed?
LINPAK Performance Trends
10,000
10,000
CRAY
 CRAY
 Micro
Micro
n = 1,000
n = 100
n = 1,000
n = 100
LINPACK (MFLOPS)
(109 FLOPS)
T94

C90



100





Ymp
Xmp/416 
1 TeraFLOP
LINPACK (GFLOPS)

1 GFLOP
DEC 8200
  


 IBM Pow er2/990
MIPS R4400
Xmp/14se
(1012 FLOPS =1000 GFLOPS)
100
CM-200 

Ymp/832(8)
10
1

MIPS M/2000



 C90(16)
Delta
10
DEC Alpha
 HP9000/735

 DEC Alpha AXP
 HP 9000/750
 IBM RS6000/540
Paragon XP/S MP
(6768)

Paragon XP/S MP
(1024) 
 T3D
CM-5 
T932(32) 
Paragon XP/S
CM-2 
 
 CRAY 1s
ASCI Red 
1,000

1,000
 MPP peak
 CRAY peak
 iPSC/860
 nCUBE/2(1024)
Xmp /416(4)

MIPS M/120

Sun 4/260
1
1975
0.1
1985


1980
1985
1990
1995
Uniprocessor Performance
GLOP = 109 FLOPS TeraFLOP = 1000 GFLOPS = 10 12 FLOPS
PetaFLOP = 1000 TeraFLOPS = 10 15 FLOPS
1987
1989
1991
1993
1995
1996
2000
Parallel System Performance
CMPE655 - Shaaban
#19 lec # 1 Fall 2014 8-26-2014
Computer System Peak FLOP Rating History
Current Top Peak FP Performance:
Since ~ June 2013
Now about 54,902,400 GFlops/s = 54,902.4 TeraFlops/s = 54.9 PetaFlops/s
Tianhe-2 (MilkyWay-2) ( @ National University of Defense Technology, Changsha, China)
3,120,000 total processor cores:
384,000 Intel Xeon cores (32,000 Xeon E5-2692 12-core processors @ 2.2 GHz) +
2,736,000 Intel Xeon Phi cores (48,000 Xeon Phi 31S1P 57-core processors @ 1.1 GHz)
Tianhe-2 (MilkyWay-2)
Peta FLOP (1015 FLOPS = 1000 Tera FLOPS)
Quadrillion Flops
Teraflop
(1012 FLOPS = 1000 GFLOPS)
GLOP = 109 FLOPS TeraFLOP = 1000 GFLOPS = 10 12 FLOPS
PetaFLOP = 1000 TeraFLOPS = 1015 FLOPS
Current ranking of top 500 parallel supercomputers
in the world is found at: www.top500.org
CMPE655 - Shaaban
#20 lec # 1 Fall 2014 8-26-2014
November 2005
Source (and for current list): www.top500.org
CMPE655 - Shaaban
#21 lec # 1 Fall 2014 8-26-2014
TOP500 Supercomputers
32nd List (November 2008): The Top 10
KW
Source (and for current list): www.top500.org
CMPE655 - Shaaban
#22 lec # 1 Fall 2014 8-26-2014
TOP500 Supercomputers
34th List (November 2009): The Top 10
KW
Source (and for current list): www.top500.org
CMPE655 - Shaaban
#23 lec # 1 Fall 2014 8-26-2014
TOP500 Supercomputers
36th List (November 2010): The Top 10
KW
Source (and for current list): www.top500.org
CMPE655 - Shaaban
#24 lec # 1 Fall 2014 8-26-2014
TOP500 Supercomputers
38th List (November 2011): The Top 10
Current List
KW
Source (and for current list): www.top500.org
CMPE655 - Shaaban
#25 lec # 1 Fall 2014 8-26-2014
KW
TOP500 Supercomputers
40th List
(November 2012)
The Top 10
Cray XK7 - Titan
( @ Oak Ridge National Laboratory)
LINPACK Performance:
17.59 PetaFlops/s (quadrillion Flops per second)
Peak Performance: 27.1 PetaFlops/s
560,640 total processor cores:
299,008 Opteron cores
(18,688 AMD Opteron 6274 16-core
processors @ 2.2 GHz)
+
261,632 GPU cores
(18,688 Nvidia Tesla Kepler K20x GPUs @ 0.7 GHz)
Source (and for current list):
www.top500.org
CMPE655 - Shaaban
#26 lec # 1 Fall 2014 8-26-2014
TOP500 Supercomputers
41st List (June 2013): The Top 10
KW
Source (and for current list): www.top500.org
CMPE655 - Shaaban
#27 lec # 1 Fall 2014 8-26-2014
TOP500 Supercomputers
42nd List (Nov. 2013): The Top 10
KW
Source (and for current list): www.top500.org
CMPE655 - Shaaban
#28 lec # 1 Fall 2014 8-26-2014
TOP500 Supercomputers
43rd List (June 2014): The Top 10
KW
Source (and for current list): www.top500.org
CMPE655 - Shaaban
#29 lec # 1 Fall 2014 8-26-2014
The Goal of Parallel Processing
• Goal of applications in using parallel machines:
Maximize Speedup over single processor performance
Parallel
Speedup (p processors) =
Performance (p processors)
Performance (1 processor)
• For a fixed problem size (input data set),
performance = 1/time
Fixed Problem Size Parallel Speedup
Parallel Speedup, Speedupp
Speedup fixed problem (p processors) =
Time (1 processor)
Time (p processors)
• Ideal speedup = number of processors = p
Very hard to achieve
+ load imbalance
Due to parallelization overheads: communication cost, dependencies ...
CMPE655 - Shaaban
#30 lec # 1 Fall 2014 8-26-2014
The Goal of Parallel Processing
• Parallel processing goal is to maximize parallel speedup:
Fixed Problem Size Parallel Speedup
Speedup =
Or time
Sequential Work on one processor
Time(1)
Time(p) < Max (Work + Synch Wait Time + Comm Cost + Extra Work)
Time
Parallelization overheads
i.e the processor with maximum execution time
• Ideal Speedup = p = number of processors
Implies or Requires
– Very hard to achieve: Implies no parallelization overheads and perfect load
balance among all processors.
•
Maximize parallel speedup by:
1
2
•
– Balancing computations on processors (every processor does the same amount of
work) and the same amount of overheads.
– Minimizing communication cost and other overheads associated with each step
of parallel program creation and execution.
Performance Scalability:
+
Achieve a good speedup for the parallel application on the parallel architecture as
problem size and machine size (number of processors) are increased.
CMPE655 - Shaaban
#31 lec # 1 Fall 2014 8-26-2014
Elements of Parallel Computing
HPC
Driving
Force
Assign
parallel
computations
(Tasks) to
processors
Computing
Problems
Processing Nodes/Network
Parallel
Algorithms
and Data
Structures
Dependency
analysis
(Task Dependency
Graphs)
Mapping
Parallel
Hardware
Architecture
Parallel
Programming
High-level
Languages
Parallel
Program
Operating System
Binding
(Compile,
Load)
Applications Software
Performance
Evaluation
e.g Parallel Speedup
CMPE655 - Shaaban
#32 lec # 1 Fall 2014 8-26-2014
Elements of Parallel Computing
1 Computing Problems:
Driving
Force
– Numerical Computing: Science and and engineering numerical
problems demand intensive integer and floating point
computations.
– Logical Reasoning: Artificial intelligence (AI) demand logic
inferences and symbolic manipulations and large space searches.
2 Parallel Algorithms and Data Structures
– Special algorithms and data structures are needed to specify the
computations and communication present in computing problems
(from dependency analysis).
– Most numerical algorithms are deterministic using regular data
structures.
– Symbolic processing may use heuristics or non-deterministic
searches.
– Parallel algorithm development requires interdisciplinary
interaction.
CMPE655 - Shaaban
#33 lec # 1 Fall 2014 8-26-2014
Elements of Parallel Computing
3 Hardware Resources
Parallel Architecture
Computing power
A–
Processors, memory, and peripheral devices (processing
nodes) form the hardware core of a computer system.
B – Processor connectivity (system interconnects, network),
memory organization, influence the system architecture.
4 Operating Systems
Communication/connectivity
– Manages the allocation of resources to running processes.
– Mapping to match algorithmic structures with hardware
architecture and vice versa: processor scheduling, memory
mapping, interprocessor communication.
• Parallelism exploitation possible at: 1- algorithm design,
2- program writing, 3- compilation, and 4- run time.
CMPE655 - Shaaban
#34 lec # 1 Fall 2014 8-26-2014
Elements of Parallel Computing
5 System Software Support
– Needed for the development of efficient programs in high-level
languages (HLLs.)
– Assemblers, loaders.
– Portable parallel programming languages/libraries
– User interfaces and tools.
6 Compiler Support
Approaches to parallel programming
(a) – Implicit Parallelism Approach
• Parallelizing compiler: Can automatically detect parallelism in sequential
source code and transforms it into parallel constructs/code.
• Source code written in conventional sequential languages
(b) – Explicit Parallelism Approach:
• Programmer explicitly specifies parallelism using:
– Sequential compiler (conventional sequential HLL) and low-level
library of the target parallel computer , or ..
– Concurrent (parallel) HLL .
• Concurrency Preserving Compiler: The compiler in this case preserves the
parallelism explicitly specified by the programmer. It may perform some
program flow analysis, dependence checking, limited optimizations for
parallelism detection.
Illustrated next
CMPE655 - Shaaban
#35 lec # 1 Fall 2014 8-26-2014
Approaches to Parallel Programming
Programmer
Programmer
Source code written in
sequential languages C, C++
FORTRAN, LISP ..
Source code written in
concurrent dialects of C, C++
FORTRAN, LISP ..
Parallelizing
compiler
Concurrency
preserving compiler
Parallel
object code
Execution by
runtime system
(a) Implicit
Parallelism
Compiler automatically
detects parallelism in
sequential source code
and transforms it into
parallel constructs/code
Concurrent
object code
Execution by
runtime system
(b) Explicit
Parallelism
Programmer explicitly
specifies parallelism
using parallel constructs
CMPE655 - Shaaban
#36 lec # 1 Fall 2014 8-26-2014
Factors Affecting Parallel System Performance
• Parallel Algorithm Related:
i.e Inherent
Parallelism
– Available concurrency and profile, grain size, uniformity, patterns.
• Dependencies between computations represented by dependency graph
–
–
–
–
Type of parallelism present: Functional and/or data parallelism.
Required communication/synchronization, uniformity and patterns.
Data size requirements.
Communication to computation ratio (C-to-C ratio, lower is better).
• Parallel program Related:
– Programming model used.
– Resulting data/code memory requirements, locality and working set
characteristics.
– Parallel task grain size.
– Assignment (mapping) of tasks to processors: Dynamic or static.
– Cost of communication/synchronization primitives.
• Hardware/Architecture related:
–
–
–
–
–
Total CPU computational power available. + Number of processors
(hardware parallelism)
Types of computation modes supported.
Shared address space Vs. message passing.
Communication network characteristics (topology, bandwidth, latency)
Memory hierarchy properties.
Concurrency = Parallelism
CMPE655 - Shaaban
#37 lec # 1 Fall 2014 8-26-2014
Sequential Execution
on one processor
0
Possible Parallel Execution Schedule on Two Processors P0, P1
Task Dependency Graph
0
Task:
1
A
2
Computation
run on one
processor
1
A
3
B
C
9
7
Comm
D
10
E
F
D
11
12
E
14
G
15
D
9
10
E
Idle
12
Comm
13
14
Idle
G
15
16
F
17
18
19
G
20
16
What would the speed be
with 3 processors?
4 processors? 5 … ?
17
18
T2 =16
19
20
21
21
Time
T1 =21
F
8
11
Comm
13
B
6
C
8
C
5
6
7
Comm
4
B
5
Idle
3
Comm
4
A
2
Assume computation time for each task A-G = 3
Assume communication time between parallel tasks = 1
Assume communication can overlap with computation
Speedup on two processors = T1/T2 = 21/16 = 1.3
A simple parallel execution example
Time
P0
P1
CMPE655 - Shaaban
#38 lec # 1 Fall 2014 8-26-2014
Non-pipelined
Sequential
Limited
Pipelining
Evolution of Computer
Architecture
Scalar
Lookahead
Functional
Parallelism
I/E Overlap
Multiple
Func. Units
Pipeline
Implicit
Vector
I/E: Instruction Fetch and
Execute
SIMD: Single Instruction stream
over Multiple Data streams
Pipelined (single or multiple issue)
Explicit
Vector
Memory-to
-Memory
MIMD: Multiple Instruction
streams over Multiple Data
streams
SIMD
Associative
Processor
Processor
Array
Data Parallel
Message Passing
Vector/data parallel
Register-to
-Register
Parallel
Machines
MIMD
Multicomputer
Computer
Clusters
Shared
Memory
Multiprocessor
Massively Parallel
Processors (MPPs)
CMPE655 - Shaaban
Parallel Architectures History
Historically, parallel architectures were tied to parallel
programming models:
• Divergent architectures, with no predictable pattern of growth.
Application Software
Systolic
Arrays
System
Software
Architecture
SIMD
Data Parallel
Architectures
Message Passing
Dataflow
Shared Memory
More on this next lecture
CMPE655 - Shaaban
#40 lec # 1 Fall 2014 8-26-2014
Parallel Programming Models
• Programming methodology used in coding parallel applications
• Specifies: 1- communication and 2- synchronization
• Examples:
However, a good way to utilize multi-core processors for the masses!
– Multiprogramming: or Multi-tasking (not true parallel processing!)
No communication or synchronization at program level. A number of
independent programs running on different processors in the system.
– Shared memory address space (SAS):
Parallel program threads or tasks communicate implicitly using
a shared memory address space (shared data in memory).
– Message passing:
Explicit point to point communication (via send/receive pairs) is used
between parallel program tasks using messages.
– Data parallel:
More regimented, global actions on data (i.e the same operations over
all elements on an array or vector)
– Can be implemented with shared address space or message
passing.
CMPE655 - Shaaban
#41 lec # 1 Fall 2014 8-26-2014
Flynn’s 1972 Classification of Computer Architecture
(Taxonomy)
Instruction Stream = Thread of Control or Hardware Context
(a)• Single Instruction stream over a Single Data stream (SISD):
Conventional sequential machines or uniprocessors.
(b)• Single Instruction stream over Multiple Data streams
(SIMD): Vector computers, array of synchronized
processing elements. Data parallel systems (GPUs?)
(c)• Multiple Instruction streams and a Single Data stream
(MISD): Systolic arrays for pipelined execution.
(d)• Multiple Instruction streams over Multiple Data streams
(MIMD): Parallel computers:
Tightly coupled
processors
Loosely coupled
processors
• Shared memory multiprocessors.
• Multicomputers: Unshared distributed memory,
message-passing used instead (e.g clusters)
Classified according to number of instruction streams
(threads) and number of data streams in architecture
CMPE655 - Shaaban
#42 lec # 1 Fall 2014 8-26-2014
Flynn’s Classification of Computer Architecture
(Taxonomy)
Uniprocessor
Single Instruction stream over Multiple Data streams (SIMD):
Vector computers, array of synchronized processing elements.
CU = Control Unit
PE = Processing Element
M = Memory
Shown here:
array of synchronized
processing elements
Single Instruction stream over a Single Data stream (SISD):
Conventional sequential machines or uniprocessors.
Parallel computers
or multiprocessor systems
Multiple Instruction streams and a Single Data stream (MISD):
Systolic arrays for pipelined execution.
Classified according to number of instruction streams
(threads) and number of data streams in architecture
Multiple Instruction streams over Multiple
Data streams (MIMD): Parallel computers:
Distributed memory multiprocessor system shown
CMPE655 - Shaaban
#43 lec # 1 Fall 2014 8-26-2014
Current Trends In Parallel Architectures
Conventional or sequential
• The extension of “computer architecture” to support
communication and cooperation:
– OLD: Instruction Set Architecture (ISA)
– NEW: Communication Architecture
• Defines:
1 – Critical abstractions, boundaries, and primitives
(interfaces).
2 – Organizational structures that implement interfaces
(hardware or software)
Implementation of Interfaces
• Compilers, libraries and OS are important bridges today
i.e. software abstraction layers
More on this next lecture
CMPE655 - Shaaban
#44 lec # 1 Fall 2014 8-26-2014
Software
Modern Parallel Architecture
Layered Framework
CAD
Database
Multiprogramming
Shared
address
Scientific modeling
Message
passing
Parallel applications
Data
parallel
Programming models
User Space
Compilation
or library
Hardware
Operating systems support
Communication hardware
Communication abstraction
User/system boundary
System Space
Hardware/software boundary
(ISA)
Physical communication medium
Hardware: Processing Nodes & Interconnects
More on this next lecture
CMPE655 - Shaaban
#45 lec # 1 Fall 2014 8-26-2014
Shared Address Space (SAS) Parallel Architectures
(in shared address space)
• Any processor can directly reference any memory location
– Communication occurs implicitly as result of loads and stores
• Convenient:
Communication is implicit via loads/stores
– Location transparency
– Similar programming model to time-sharing in uniprocessors
• Except processes run on different processors
• Good throughput on multiprogrammed workloads
i.e multi-tasking
• Naturally provided on a wide range of platforms
– Wide range of scale: few to hundreds of processors
• Popularly known as shared memory machines or model
– Ambiguous: Memory may be physically distributed among
processing nodes. i.e Distributed shared memory multiprocessors
Sometimes called Tightly-Coupled Parallel Computers
CMPE655 - Shaaban
#46 lec # 1 Fall 2014 8-26-2014
Shared Address Space (SAS) Parallel Programming Model
• Process: virtual address space plus one or more threads of control
• Portions of address spaces of processes are shared:
Virtual address spaces for a
collection of processes communicating
via shared addresses
In SAS:
Communication is implicit
via loads/stores.
Load
P1
Ordering/Synchronization
is explicit using synchronization
Primitives.
Machine physical address space
Pn pr i v at e
Pn
P2
Common physical
addresses
Shared
Space
P0
St or e
Shared portion
of address space
Private portion
of address space
P2 pr i v at e
P1 pr i v at e
P0 pr i v at e
• Writes to shared address visible to other threads (in other processes too)
•
Natural extension of the uniprocessor model: Thus communication is implicit via loads/stores
• Conventional memory operations used for communication
• Special atomic operations needed for synchronization: i.e for event ordering and mutual exclusion
• Using Locks, Semaphores etc.
Thus synchronization is explicit
• OS uses shared memory to coordinate processes.
CMPE655 - Shaaban
#47 lec # 1 Fall 2014 8-26-2014
Models of Shared-Memory Multiprocessors
1 • The Uniform/Centralized Memory Access (UMA) Model:
– All physical memory is shared by all processors.
– All processors have equal access (i.e equal memory
bandwidth and access latency) to all memory addresses.
– Also referred to as Symmetric Memory Processors (SMPs).
2 • Distributed memory or Non-uniform Memory Access
(NUMA) Model:
– Shared memory is physically distributed locally among
processors. Access latency to remote memory is higher.
3 • The Cache-Only Memory Architecture (COMA) Model:
– A special case of a NUMA machine where all distributed
main memory is converted to caches.
– No memory hierarchy at each processor.
CMPE655 - Shaaban
#48 lec # 1 Fall 2014 8-26-2014
Models of Shared-Memory Multiprocessors
1
Uniform Memory Access (UMA) Model
or Symmetric Memory Processors (SMPs).
UMA
Interconnect:
Bus, Crossbar, Multistage network
P: Processor
M or Mem: Memory
C: Cache
D: Cache directory
I/O
devices
Mem
Mem
Mem
Mem
I/O ctrl
I/O ctrl
Interconnect /Network
Interconnect
Processor
Processor
Network
Network

M
$
P
M
$

M
P
D
D
C
C
C
P
P
P
$
P
NUMA
2
D
Distributed memory or
Non-uniform Memory Access (NUMA) Model
3
Cache-Only Memory Architecture (COMA)
CMPE655 - Shaaban
#49 lec # 1 Fall 2014 8-26-2014
Uniform Memory Access (UMA)
Example: Intel Pentium Pro Quad
4-way SMP
CPU
P-Pr o
module
256-KB
Interrupt
L2 $
controller
Bus interface
Shared
FSB
P-Pr o
module
Circa 1997
P-Pr o
module
PCI
bridge
PCI bus
PCI
I/O
cards
PCI
bridge
PCI bus
P-Pr o bus (64-bit data, 36-bit address, 66 MHz)
Memory
controller
MIU
1-, 2-, or 4-w ay
interleaved
DRAM
•
All coherence and multiprocessing glue in
processor module
•
Highly integrated, targeted at high volume
•
Computing node used in Intel’s ASCI-Red
MPP
Bus-Based Symmetric Memory Processors (SMPs).
A single Front Side Bus (FSB) is shared among processors
This severely limits scalability to only ~ 2-4 processors
CMPE655 - Shaaban
#50 lec # 1 Fall 2014 8-26-2014
Non-Uniform Memory Access (NUMA)
Example: 8-Socket AMD Opteron Node
Circa 2003
Dedicated point-to-point interconnects (HyperTransport links) used to connect
processors alleviating the traditional limitations of FSB-based SMP systems.
Each processor has two integrated DDR memory channel controllers:
memory bandwidth scales up with number of processors.
NUMA architecture since a processor can access its own memory at a lower latency
than access to remote memory directly connected to other processors in the system.
Total 32 processor cores when
quad core Opteron processors used
(128 cores with 16-core processors)
CMPE655 - Shaaban
#51 lec # 1 Fall 2014 8-26-2014
Non-Uniform Memory Access (NUMA)
Example: 4-Socket Intel Nehalem-EX Node
CMPE655 - Shaaban
#52 lec # 1 Fall 2014 8-26-2014
Distributed Shared-Memory
Multiprocessor System Example:
Circa 1995-1999
Cray T3E
NUMA MPP Example
External I/O
MPP = Massively Parallel Processor System
P
$
Mem
Mem
ctrl
and NI
XY
More recent Cray MPP Example:
Cray X1E Supercomputer
3D Torus Point-To-Point Network
•
•
•
•
Sw itch
Communication
Assist (CA)
Z
Scale up to 2048 processors, DEC Alpha EV6 microprocessor (COTS)
Custom 3D Torus point-to-point network, 480MB/s links
Memory controller generates communication requests for non-local references
No hardware mechanism for coherence (SGI Origin etc. provide this)
Example of Non-uniform Memory Access (NUMA)
CMPE655 - Shaaban
#53 lec # 1 Fall 2014 8-26-2014
Message-Passing Multicomputers
•
Comprised of multiple autonomous computers (computing nodes) connected
via a suitable network. Industry standard System Area Network (SAN) or proprietary network
•
Each node consists of one or more processors, local memory, attached storage
and I/O peripherals and Communication Assist (CA).
•
Local memory is only accessible by local processors in a node (no shared
memory among nodes).
•
Inter-node communication is carried explicitly out by message passing
through the connection network via send/receive operations.
Thus communication is explicit
•
Process communication achieved using a message-passing programming
environment (e.g. PVM, MPI).
Portable, platform-independent
– Programming model more removed or abstracted from basic hardware operations
•
Include:
– A number of commercial Massively Parallel Processor systems (MPPs).
1
– Computer clusters that utilize commodity of-the-shelf (COTS) components.
2
Also called Loosely-Coupled Parallel Computers
CMPE655 - Shaaban
#54 lec # 1 Fall 2014 8-26-2014
Message-Passing Abstraction
Tag
Send (X, Q, t)
Match
Data
Receive Y, P, t
Address Y
Send X, Q, t
Recipient
Addr ess X
Local pr ocess
addr ess space
Tag
Receive (Y, P, t)
Sender P
Data
•
Recipient Q
Sender
Process P
•
•
•
•
•
•
Local pr ocess
addr ess space
Recipient blocks (waits)
until message is received
Process Q
Send specifies buffer to be transmitted and receiving process.
Communication is explicit
Receive specifies sending process and application storage to receive into. via sends/receives
Memory to memory copy possible, but need to name processes.
Optional tag on send and matching rule on receive.
i.e event ordering, in this case
User process names local data and entities in process/tag space too
In simplest form, the send/receive match achieves implicit pairwise synchronization event
– Ordering of computations according to dependencies
Synchronization is
Many possible overheads: copying, buffer management, protection ...
implicit
Pairwise synchronization
using send/receive match
Sender P
Data Dependency
/Ordering
Blocking Receive
Recipient Q
CMPE655 - Shaaban
#55 lec # 1 Fall 2014 8-26-2014
Message-Passing Example:
Intel Paragon
Circa 1983
i860
i860
L1 $
L1 $
Intel
Paragon
node
Each node
Is a 2-way-SMP
Memory bus (64-bit, 50 MHz)
Mem
ctrl
DMA
Driver
Sandia’ s Intel Paragon XP/S-based Super computer
2D grid netw ork
w ith processing node
attached to every sw itch
NI
4-w ay
interleaved
DRAM
Communication
Assist (CA)
8 bits,
175 MHz,
bidirectional
2D grid
point to point
network
CMPE655 - Shaaban
#56 lec # 1 Fall 2014 8-26-2014
Message-Passing Example: IBM SP-2
MPP
Circa 1994-1998
Pow er 2
CPU
IBM SP-2 node
L2 $
Memory bus
General interconnection
netw ork f ormed fom
r
8-port sw itches
•
Made out of essentially
complete RS6000
workstations
Network interface
integrated in I/O bus
(bandwidth limited by I/O
bus)
MicroChannel bus
NIC
I/O
i860
NI
Communication
Assist (CA)
Multi-stage network
MPP = Massively Parallel Processor System
DMA
DRAM
•
4-w ay
interleaved
DRAM
Memory
controller
CMPE655 - Shaaban
#57 lec # 1 Fall 2014 8-26-2014
Message-Passing MPP Example:
Circa 2005
IBM Blue Gene/L
(2 processors/chip) • (2 chips/compute card) • (16 compute cards/node board) • (32 node
boards/tower) • (64 tower) = 128k = 131072 (0.7 GHz PowerPC 440) processors (64k nodes)
System Location: Lawrence Livermore National Laboratory
Networks:
3D Torus point-to-point network
Global tree 3D point-to-point network
(both proprietary)
2.8 Gflops peak
per processor core
System
(64 cabinets, 64x32x32)
Cabinet
(32 Node boards, 8x8x16)
Node Board
(32 chips, 4x4x2)
16 Compute Cards
Compute Card
(2 chips, 2x1x1)
180/360 TF/s
16 TB DDR
Chip
(2 processors)
90/180 GF/s
8 GB DDR
2.8/5.6 GF/s
4 MB
5.6/11.2 GF/s
0.5 GB DDR
LINPACK Performance:
280,600 GFLOPS = 280.6 TeraFLOPS = 0.2806 Peta FLOP
Top Peak FP Performance:
Now about 367,000 GFLOPS = 367 TeraFLOPS = 0.367 Peta FLOP
2.9/5.7 TF/s
256 GB DDR
Design Goals:
- High computational power efficiency
- High computational density per volume
CMPE655 - Shaaban
#58 lec # 1 Fall 2014 8-26-2014
Message-Passing Programming Tools
• Message-passing programming environments include:
– Message Passing Interface (MPI):
• Provides a standard for writing concurrent message-passing
programs.
• MPI implementations include parallel libraries used by existing
programming languages (C, C++).
Both MPI & PVM are examples
– Parallel Virtual Machine (PVM):
of the explicit parallelism approach
to parallel programming
• Enables a collection of heterogeneous computers to used as a
coherent and flexible concurrent computational resource.
• PVM support software executes on each machine in a userconfigurable pool, and provides a computational environment of
concurrent applications.
• User programs written for example in C, Fortran or Java are
provided access to PVM through the use of calls to PVM library
routines.
Both MPI and PVM are portable (platform-independent)
and allow the user to explicitly specify parallelism
CMPE655 - Shaaban
#59 lec # 1 Fall 2014 8-26-2014
Data Parallel Systems SIMD in Flynn taxonomy
•
Programming model (Data Parallel)
–
Similar operations performed in parallel on
each element of data structure
– Logically single thread of control, performs
sequential or parallel steps
Control
processor
– Conceptually, a processor is associated with
each data element
•
Architectural model
– Array of many simple processors each with
little memory
• Processors don’t sequence through
instructions
– Attached to a control processor that issues
instructions
– Specialized and general communication, global
synchronization
•
Example machines:
– Thinking Machines CM-1, CM-2 (and CM-5)
– Maspar MP-1 and MP-2,
PE
PE

PE
PE
PE

PE


PE
PE


PE
All PE are synchronized
(same instruction or operation
in a given cycle)
Other Data Parallel Architectures: Vector Machines
PE = Processing Element
CMPE655 - Shaaban
#60 lec # 1 Fall 2014 8-26-2014
Dataflow Architectures
• Represent computation as a graph of essential data dependencies
– Non-Von Neumann Architecture (Not PC-based Architecture)
– Logical processor at each node, activated by availability of operands
i.e data or results
– Message (tokens) carrying tag of next instruction sent to next processor
– Tag compared with others in matching store; match fires execution
1
b
c
e
Research Dataflow machine
prototypes include:
Token
+


a = (b +1)  (b  c)
Distribution
• The MIT Tagged Architecture
d=ce
Network
f = a d
• The Manchester Dataflow Machine
d

Dataflow graph
a
Dependency graph for
entire computation (program)
Token
store
Program
store
Waiting
Matching
Instruction
fetch

Netw ork
f
One Node
Execute
Form
token
Netw ork
Token queue
Netw ork
Token
Matching
Token
Distribution
Tokens = Copies of computation results
The Tomasulo approach for dynamic
instruction execution utilizes a dataflow
driven execution engine:
• The data dependency graph for a small
window of instructions is constructed
dynamically when instructions are issued
in order of the program.
• The execution of an issued instruction
is triggered by the availability of its
operands (data it needs) over the CDB.
CMPE655 - Shaaban
#61 lec # 1 Fall 2014 8-26-2014
Speculative Tomasulo
Processor
Speculative Execution +
Tomasulo’s Algorithm
= Speculative Tomasulo
The Tomasulo approach for
dynamic instruction execution
utilizes a dataflow driven
execution engine:
Commit or Retirement
(In Order)
FIFO
Usually
implemented
as a circular
buffer
Instructions
to issue in
Order:
Instruction
Queue (IQ)
Next to
commit
Store
Results
• The data dependency graph
for a small window of
instructions is constructed
dynamically when instructions
are issued in order of the
program.
• The execution of an issued
instruction is triggered by the
availability of its operands
(data it needs) over the CDB.
From 550 Lecture 6
CMPE655 - Shaaban
#62 lec # 1 Fall 2014 8-26-2014
Example of Flynn’s Taxonomy’s MISD (Multiple Instruction Streams Single Data Stream):
Systolic Architectures
• Replace single processor with an array of regular processing elements
• Orchestrate data flow for high throughput with less memory access
PE = Processing Element
M = Memory
M
M
PE
PE
•
PE
PE
•
Different from linear pipelining
– Nonlinear array structure, multidirection data flow, each PE may have
(small) local instruction and data memory
Different from SIMD: each PE may do something different
•
•
Initial motivation: VLSI Application-Specific Integrated Circuits (ASICs)
Represent algorithms directly by chips connected in regular pattern
A possible example of MISD in Flynn’s
Classification of Computer Architecture
CMPE655 - Shaaban
#63 lec # 1 Fall 2014 8-26-2014
C=AX B
Systolic Array Example:
3x3 Systolic Array Matrix Multiplication
• Processors arranged in a 2-D grid
• Each processor accumulates one
element of the product
b2,0
b1,0
b0,0
Alignments in time
b2,1
b1,1
b0,1
Column 1
b2,2
b1,2
b0,2
Column 2
Columns of B
Column 0
Rows of A
a0,2
a0,1
a0,0
Row 0
a1,2
a1,1
a1,0
Row 1
a2,2
a2,1
a2,0
Row 2
T=0
Example source: http://www.cs.hmc.edu/courses/2001/spring/cs156/
CMPE655 - Shaaban
#64 lec # 1 Fall 2014 8-26-2014
Systolic Array Example:
3x3 Systolic Array Matrix Multiplication
• Processors arranged in a 2-D grid
• Each processor accumulates one
element of the product
b2,0
b1,0
Alignments in time
b2,1
b1,1
b0,1
b2,2
b1,2
b0,2
b0,0
a0,2
a1,2
a2,2
a2,1
a1,1
a0,1
a0,0
a0,0*b0,0
a1,0
a2,0
T=1
Example source: http://www.cs.hmc.edu/courses/2001/spring/cs156/
CMPE655 - Shaaban
#65 lec # 1 Fall 2014 8-26-2014
Systolic Array Example:
3x3 Systolic Array Matrix Multiplication
• Processors arranged in a 2-D grid
• Each processor accumulates one
element of the product
Alignments in time
b2,1
b1,1
b2,0
b1,0
a0,2
a0,1
a0,0*b0,0
+ a0,1*b1,0
a0,0
b2,2
b1,2
b0,2
b0,1
a0,0*b0,1
b0,0
a1,2
a2,2
a2,1
a1,1
a1,0
a1,0*b0,0
a2,0
T=2
Example source: http://www.cs.hmc.edu/courses/2001/spring/cs156/
CMPE655 - Shaaban
#66 lec # 1 Fall 2014 8-26-2014
Systolic Array Example:
3x3 Systolic Array Matrix Multiplication
• Processors arranged in a 2-D grid
• Each processor accumulates one
element of the product
Alignments in time
b2,2
b1,2
b2,1
b2,0
a0,2
a0,0*b0,0
+ a0,1*b1,0
+ a0,2*b2,0
a0,1
b1,1
a0,0*b0,1
+ a0,1*b1,1
a0,0
b0,2
a0,0*b0,2
C00
b1,0
a1,2
a1,1
a1,0*b0,0
+ a1,1*b1,0
a1,0
b0,1
a1,0*b0,1
b0,0
a2,2
a2,1
a2,0
T=3
Example source: http://www.cs.hmc.edu/courses/2001/spring/cs156/
a2,0*b0,0
CMPE655 - Shaaban
#67 lec # 1 Fall 2014 8-26-2014
Systolic Array Example:
3x3 Systolic Array Matrix Multiplication
• Processors arranged in a 2-D grid
• Each processor accumulates one
element of the product
Alignments in time
b2,2
b2,1
a0,0*b0,0
+ a0,1*b1,0
+ a0,2*b2,0
a0,2
a0,1
a0,0*b0,2
+ a0,1*b1,2
C01
C00
b2,0
a1,2
a0,0*b0,1
+ a0,1*b1,1
+ a0,2*b2,1
b1,2
a1,0*b0,0
+ a1,1*b1,0
+ a1,2*a2,0
a1,1
b1,1
a1,0*b0,1
+a1,1*b1,1
a1,0
b0,2
a1,0*b0,2
C10
b1,0
a2,2
a2,2
a2,1
a2,0*b0,0
+ a2,1*b1,0
T=4
Example source: http://www.cs.hmc.edu/courses/2001/spring/cs156/
a2,0
b0,1
a2,0*b0,1
CMPE655 - Shaaban
#68 lec # 1 Fall 2014 8-26-2014
Systolic Array Example:
3x3 Systolic Array Matrix Multiplication
• Processors arranged in a 2-D grid
• Each processor accumulates one
element of the product
Alignments in time
b2,2
a0,0*b0,0
+ a0,1*b1,0
+ a0,2*b2,0
a0,0*b0,1
+ a0,1*b1,1
+ a0,2*b2,1
a0,2
C01
C00
C02
b2,1
a1,0*b0,0
+ a1,1*b1,0
+ a1,2*a2,0
a1,2
b2,0
T=5
a1,0*b0,1
+a1,1*b1,1
+ a1,2*b2,1
a1,1
b1,2
a1,0*b0,2
+ a1,1*b1,2
C11
C10
a2,2
a0,0*b0,2
+ a0,1*b1,2
+ a0,2*b2,2
a2,0*b0,0
+ a2,1*b1,0
+ a2,2*b2,0
a2,1
b1,1
a2,0*b0,1
+ a2,1*b1,1
a2,0
b0,2
a2,0*b0,2
C20
Example source: http://www.cs.hmc.edu/courses/2001/spring/cs156/
CMPE655 - Shaaban
#69 lec # 1 Fall 2014 8-26-2014
Systolic Array Example:
3x3 Systolic Array Matrix Multiplication
• Processors arranged in a 2-D grid
• Each processor accumulates one
element of the product
Alignments in time
a0,0*b0,0
+ a0,1*b1,0
+ a0,2*b2,0
C00
a0,0*b0,1
+ a0,1*b1,1
+ a0,2*b2,1
a0,0*b0,2
+ a0,1*b1,2
+ a0,2*b2,2
C01
C02
b2,2
a1,0*b0,0
+ a1,1*b1,0
+ a1,2*a2,0
C10
a1,0*b0,1
+a1,1*b1,1
+ a1,2*b2,1
a1,2
C11
C12
b2,1
a2,0*b0,0
+ a2,1*b1,0
+ a2,2*b2,0
T=6
C20
Example source: http://www.cs.hmc.edu/courses/2001/spring/cs156/
a2,2
a1,0*b0,2
+ a1,1*b1,2
+ a1,2*b2,2
a2,0*b0,1
+ a2,1*b1,1
+ a2,2*b2,1
a2,1
b1,2
a2,0*b0,2
+ a2,1*b1,2
C21
CMPE655 - Shaaban
#70 lec # 1 Fall 2014 8-26-2014
Systolic Array Example:
3x3 Systolic Array Matrix Multiplication
• Processors arranged in a 2-D grid
On one processor = O(n3) t = 27?
Speedup = 27/7 = 3.85
• Each processor accumulates one
element of the product
Alignments in time
a0,0*b0,0
+ a0,1*b1,0
+ a0,2*b2,0
C00
a0,0*b0,1
+ a0,1*b1,1
+ a0,2*b2,1
C01
a1,0*b0,0
+ a1,1*b1,0
+ a1,2*a2,0
Done
C10
a0,0*b0,2
+ a0,1*b1,2
+ a0,2*b2,2
C02
a1,0*b0,2
+ a1,1*b1,2
+ a1,2*b2,2
a1,0*b0,1
+a1,1*b1,1
+ a1,2*b2,1
C11
C12
b2,2
a2,0*b0,1
+ a2,1*b1,1
+ a2,2*b2,1
a2,0*b0,0
+ a2,1*b1,0
+ a2,2*b2,0
T=7
C20
Example source: http://www.cs.hmc.edu/courses/2001/spring/cs156/
C21
a2,2
a2,0*b0,2
+ a2,1*b1,2
+ a2,2*b2,2
C22
CMPE655 - Shaaban
#71 lec # 1 Fall 2014 8-26-2014
Download