Publications for Andrew Harris
Publications for Andrew Harris
2016
King, A., Davies, B., Noorbehesht, N., Newman,
P., Church, T., Harris, A., Razal, J., Minett, A.
(2016). A new raman metric for the
characterisation of graphene oxide and its
derivatives. Scientific Reports, 6(19491), 1-6. <a
href="http://dx.doi.org/10.1038/srep19491">[Mo
re Information]</a>
Zhai, S., Karahan, H., Wei, L., Qian, Q., Harris,
A., Minett, A., Ramakrishna, S., Ng, A., Chen,
Y. (2016). Textile energy storage: Structural
design concepts, material selection and future
perspectives. Energy Storage Materials, 3,
123-139. <a
href="http://dx.doi.org/10.1016/j.ensm.2016.02.0
03">[More Information]</a>
2015
Variava, M., Church, T., Noorbehesht, N.,
Harris, A., Minett, A. (2015). Carbon-supported
gas-cleaning catalysts enable syn gas
methanation at atmospheric pressure. Catalysis
Science and Technology, 5(1), 515-524. <a
href="http://dx.doi.org/10.1039/c4cy00696h">[
More Information]</a>
Haque, E., Islam, M., Pourazadi, E., Hassan, M.,
Faisal, S., Roy, A., Konstantinov, K., Harris, A.,
Minett, A., Gomes, V. (2015). Nitrogen doped
graphene via thermal treatment of composite
solid precursors as a high performance
supercapacitor. RSC Advances, 5(39),
30679-30686. <a
href="http://dx.doi.org/10.1039/c4ra17262k">[M
ore Information]</a>
Arab, M., Minett, A., Harris, A., Church, T.
(2015). Solid particles' recirculation distribution
in calcium looping post-combustion carbon
capture. International Journal of Greenhouse
Gas Control, 43, 161-171. <a
href="http://dx.doi.org/10.1016/j.ijggc.2015.10.0
08">[More Information]</a>
2014
Variava, M., Church, T., Husin, A., Harris, A.,
Minett, A. (2014). A Simple Gas-Solid Route To
Functionalize Ordered Carbon. ACS Applied
Materials and Interfaces, 6(4), 2910-2916. <a
href="http://dx.doi.org/10.1021/am405484g">[M
ore Information]</a>
Wang, H., Chang, L., Yang, X., Yuan, L., Ye, L.,
Zhu, Y., Harris, A., Minett, A., Trimby, P.,
Friedrich, K. (2014). Anisotropy in tribological
performances of long aligned carbon
nanotubes/polymer composites. Carbon, 67,
38-47. <a
href="http://dx.doi.org/10.1016/j.carbon.2013.09
.052">[More Information]</a>
Rahman, M., Church, T., Variava, M., Harris, A.,
Minett, A. (2014). Bimetallic Pt-Ni composites
on ceria-doped alumina supports as catalysts in
the aqueous-phase reforming of glycerol. RSC
Advances, 4(36), 18951-18960. <a
href="http://dx.doi.org/10.1039/c4ra00355a">[M
ore Information]</a>
Amos, N., Widyawati, M., Kureti, S., Trimis, D.,
Minett, A., Harris, A., Church, T. (2014). Design
and synthesis of stable supported-CaO sorbents
for CO2 capture. Journal of Materials Chemistry
A, 2(12), 4332-4339. <a
href="http://dx.doi.org/10.1039/c3ta14953f">[M
ore Information]</a>
Enamul Haque, E., Lo, V., Minett, A., Harris, A.,
Church, T. (2014). Dichotomous adsorption
behaviour of dyes on an amino-functionalised
metal-organic framework, amino-MIL-101(Al).
Journal of Materials Chemistry A, 2(1), 193-203.
<a
href="http://dx.doi.org/10.1039/c3ta13589f">[M
ore Information]</a>
King, A., Hanus, M., Harris, A., Minett, A.
(2014). Nanocarbon-chlorophyll hybrids: Self
assembly and photoresponse. Carbon, 80(1),
746-754. <a
href="http://dx.doi.org/10.1016/j.carbon.2014.09
.024">[More Information]</a>
Khayoon, M., Abbas, A., Hameed, B.,
Triwahyono, S., Jalil, A., Harris, A., Minett, A.
(2014). Selective acetalization of glycerol with
acetone over nickel nanoparticles supported on
multi-walled carbon nanotubes. Catalysis
Letters, 144(6), 1009-1015. <a
href="http://dx.doi.org/10.1007/s10562-014-122
1-9">[More Information]</a>
2013
Braham, R., Harris, A. (2013). A complete
multi-scale simulation of light absorption within
a fluidized bed photoreactor using integrated
particle, fluid and photon behaviour models.
Physical Chemistry Chemical Physics, 15(29),
12373-12385. <a
href="http://dx.doi.org/10.1039/c3cp50328c">[
More Information]</a>
Zhao, M., Minett, A., Harris, A. (2013). A
review of techno-economic models for the
retrofitting of conventional pulverised-coal
power plants for post-combustion capture (PCC)
of CO2. Energy and Environmental Science,
6(1), 25-40. <a
href="http://dx.doi.org/10.1039/c2ee22890d">[
More Information]</a>
Das, A., Choucair, M., Southon, P., Mason, J.,
Zhao, M., Kepert, C., Harris, A., D'Alessandro,
D. (2013). Application of the piperazine-grafted
CuBTTri metal-organic framework in
Publications for Andrew Harris
postcombustion carbon dioxide capture.
Microporous and Mesoporous Materials,
174(2013), 74-80. <a
href="http://dx.doi.org/10.1016/j.micromeso.201
3.02.036">[More Information]</a>
Rahman, M., Church, T., Minett, A., Harris, A.
(2013). Effect of CeO2 addition to Al2O3
supports for Pt catalysts on the aqueous-phase
reforming of glycerol. ChemSusChem, 6(6),
1006-1013. <a
href="http://dx.doi.org/10.1002/cssc.201200797"
>[More Information]</a>
MacKenzie, K., Dunens, O., Harris, A. (2013).
Insights into carbon nanotube growth using an
automated gravimetric apparatus. Carbon,
59(August 2013), 344-365. <a
href="http://dx.doi.org/10.1016/j.carbon.2013.03
.029">[More Information]</a>
Zhang, W., Wang, M., Chen, J., Romeo, T.,
Harris, A., Minett, A. (2013). Localized growth
of Pt on Pd as a bimetallic electrocatalyst with
enhanced catalytic activity and durability for
proton exchange membrane fuel cell.
Electrochemistry Communications, 34, 73-76. <a
href="http://dx.doi.org/10.1016/j.elecom.2013.05
.017">[More Information]</a>
Hanus, M., Harris, A. (2013). Nanotechnology
innovations for the construction industry.
Progress in Materials Science, 58(7), 1056-1102.
<a
href="http://dx.doi.org/10.1016/j.pmatsci.2013.0
4.001">[More Information]</a>
Variava, M., Church, T., Harris, A., Minett, A.
(2013). Polyol-assisted functionalization of
carbon nanotubes - A perspective. Journal of
Materials Chemistry A, 1(30), 8509-8520. <a
href="http://dx.doi.org/10.1039/c3ta11319a">[M
ore Information]</a>
Yang, X., Yuan, L., Peterson, V., Minett, A.,
Zhao, M., Kirby, N., Mudie, S., Harris, A.
(2013). Pretreatment control of carbon nanotube
array growth for gas separation: Alignment and
growth studied using microscopy and
small-angle x-ray scattering. ACS Applied
Materials and Interfaces, 5(8), 3063-3070. <a
href="http://dx.doi.org/10.1021/am3032579">[M
ore Information]</a>
Widyaningrum, R., Church, T., Harris, A.
(2013). Promoting effect of Pd on H2 production
from cellulose pyrolysis over
mesocellular-foam-supported Ni catalysts.
Catalysis Communications, 35, 45-50. <a
href="http://dx.doi.org/10.1016/j.catcom.2013.02
.009">[More Information]</a>
Yang, X., Lee, J., Yuan, L., Chae, S., Peterson,
V., Minett, A., Yin, Y., Harris, A. (2013).
Removal of natural organic matter in water using
functionalised carbon nanotube buckypaper.
Carbon, 59, 160-166. <a
href="http://dx.doi.org/10.1016/j.carbon.2013.03
.005">[More Information]</a>
Chen, J., Shepherd, R., Razal, J., Huang, X.,
Zhang, W., Zhao, J., Harris, A., Wang, S.,
Minett, A., Zhang, H. (2013). Scalable
solid-template reduction for designed reduced
graphene oxide architectures. ACS Applied
Materials and Interfaces, 5(16), 7676-7681. <a
href="http://dx.doi.org/10.1021/am402084y">[M
ore Information]</a>
Zhao, J., Yu, Y., Weng, B., Zhang, W., Harris,
A., Minett, A., Yue, Z., Huang, X., Chen, J.
(2013). Sensitive and selective doparmine
determination in human serum with inkjet
printed Nafion/MWCNT chips. Electrochemistry
Communications, 37, 32-35. <a
href="http://dx.doi.org/10.1016/j.elecom.2013.10
.007">[More Information]</a>
Pourazadi, E., Haque, M., Zhang, W., Harris, A.,
Minett, A. (2013). Synergistically enhanced
electrochemical (ORR) activity of graphene
oxide using boronic acid as an interlayer spacer.
Chemical Communications, 49(94),
11068-11070. <a
href="http://dx.doi.org/10.1039/c3cc46741d">[
More Information]</a>
2012
Liang, W., Church, T., Harris, A. (2012).
Biogenic synthesis of photocatalytically active
Ag/TiO 2 and Au/TiO 2 composites. Green
Chemistry, 14(4), 968-975. <a
href="http://dx.doi.org/10.1039/c2gc16082j">[M
ore Information]</a>
Coenen, A., Church, T., Harris, A. (2012).
Biological versus Synthetic Polymers as
Templates for Calcium Oxide for CO2 Capture.
Energy and Fuels, 26(1), 162-168. <a
href="http://dx.doi.org/10.1021/ef201222q">[M
ore Information]</a>
Das, A., Southon, P., Zhao, M., Kepert, C.,
Harris, A., D'Alessandro, D. (2012). Carbon
dioxide adsorption by physisorption and
chemisorption interactions in piperazine-grafted
Ni2(dobdc) (dobdc =
1,4-dioxido-2,5-benzenedicarboxylate). Dalton
Transactions: an international journal of
inorganic, organometallic and bioinorganic
chemistry, 41(38), 11739-11744. <a
href="http://dx.doi.org/10.1039/c2dt31112g">[M
ore Information]</a>
Yang, X., Yuan, L., Peterson, V., Minett, A.,
Yin, Y., Harris, A. (2012). Facile preparation of
free-standing carbon nanotube arrays produced
using two-step floating-ferrocene chemical vapor
deposition. ACS Applied Materials and
Publications for Andrew Harris
Interfaces, 4(3), 1417-1422. <a
href="http://dx.doi.org/10.1021/am201673v">[M
ore Information]</a>
Variava, M., Church, T., Harris, A. (2012).
Magnetically recoverable Fe xO y-MWNT
Fenton's
catalysts that show enhanced activity at neutral
pH. Applied Catalysis B: Environmental, 123 124, 200-207. <a
href="http://dx.doi.org/10.1016/j.apcatb.2012.04.
034">[More Information]</a>
Widyaningrum, R., Church, T., Zhao, M., Harris,
A. (2012). Mesocellular-foam-silica-supported
Ni catalyst: Effect of pore size on H2 production
from cellulose pyrolysis. International Journal of
Hydrogen Energy, 37(12), 9590-9601. <a
href="http://dx.doi.org/10.1016/j.ijhydene.2012.
03.052">[More Information]</a>
Miralles, P., Johnson, E., Church, T., Harris, A.
(2012). Multiwalled carbon nanotubes in alfalfa
and wheat: toxicology and uptake. Journal of the
Royal Society Interface, 9(77), 3514-3527. <a
href="http://dx.doi.org/10.1098/rsif.2012.0535">
[More Information]</a>
Church, T., Fallani, S., Liu, J., Zhao, M., Harris,
A. (2012). Novel biomorphic Ni/SiC catalysts
that enhance cellulose conversion to hydrogen.
Catalysis Today, 190(1), 98-106. <a
href="http://dx.doi.org/10.1016/j.cattod.2012.01.
041">[More Information]</a>
Zhao, M., Yang, X., Church, T., Harris, A.
(2012). Novel CaO-SiO2 Sorbent and
Bifunctional Ni/Co-CaO/SiO2 Complex for
Selective H2 Synthesis from Cellulose.
Environmental Science and Technology, 46(5),
2976-2983. <a
href="http://dx.doi.org/10.1021/es300135d">[M
ore Information]</a>
Dunens, O., MacKenzie, K., Harris, A. (2012).
Screening and optimisation of the single- and
double-walled carbon nanotube parameter space
using a high-throughput methodology. Chemical
Engineering Journal, 209, 407-419. <a
href="http://dx.doi.org/10.1016/j.cej.2012.08.007
">[More Information]</a>
Hanus, M., King, A., Minett, A., Harris, A.
(2012). Separation of coiled carbon fibers from
an alumina support by microwave-assisted
digestion or sonication. Separation and
Purification Technology, 96, 248-255. <a
href="http://dx.doi.org/10.1016/j.seppur.2012.06.
004">[More Information]</a>
Zhao, M., Florin, N., Fennell, P., Harris, A.
(2012). Synthesis of cao-scaffold adsorbent with
superior stability for high-temperature CO2
capture. 2012 AIChE Annual Meeting,
Pittsburgh: American Institute of Chemical
Engineers.
Miralles, P., Church, T., Harris, A. (2012).
Toxicity, Uptake and Translocation of
Engineered Nanomaterials in Vascular Plants.
Environmental Science & Technology, 46(17),
9224-9239. <a
href="http://dx.doi.org/10.1021/es202995d">[M
ore Information]</a>
2011
Shtangeeva, I., Bali, R., Harris, A. (2011).
Bioavailability and Toxicity of Antimony.
Journal Of Geochemical Exploration, 110(1),
40-45. <a
href="http://dx.doi.org/10.1016/j.gexplo.2010.07
.003">[More Information]</a>
Harris, A. (2011). Biomimetic Patterned Surface
Coatings by Dewetting of Polymer Films for Use
in Atmospheric Water Capture. The 2011
Australian Colloid and Interface Symposium
(ACIS 2011), publisher: publisher.
Harris, A. (2011). Biomimetic Polymer Surface
Coatings by Dewetting for Atmospheric Water
Capture. 32nd Australasian Polymer Symposium,
publisher: publisher.
Thickett, S., Neto, C., Harris, A. (2011).
Biomimetic Surface Coatings for Atmospheric
Water Capture Prepared by Dewetting of
Polymer Films. Advanced Materials, 23(32),
3718-3722. <a
href="http://dx.doi.org/10.1002/adma.201100290
">[More Information]</a>
Widyawati, M., Church, T., Harris, A. (2011).
Calcium Oxide-Silicon Carbide sorbent for
Carbon Dioxide capture. Chemeca 2011:
Engineering a Better World, Sydney: Engineers
Australia.
Yang, X., Peterson, V., Yuan, L., Harris, A.
(2011). Characterization of multi-walled carbon
nanotube arrays by small-angle X-ray scattering.
Australian X-ray Analytical Association
Conference 2011, publisher: publisher.
Antiohos, D., Folkes, G., Sherrell, P., Ashraf, S.,
Wallace, G., Aitchison, P., Harris, A., Chen, J.,
Minett, A. (2011). Compositional effects of
PEDOT-PSS/single walled carbon nanotube
films on supercapacitor device performance.
Journal of Materials Chemistry, 21(40),
15987-15994. <a
href="http://dx.doi.org/10.1039/c1jm12986d">[
More Information]</a>
Yang, X., Yuan, L., Minett, A., Harris, A.
(2011). Facile Preparation and H2 Separation of
Multi-Walled Carbon Nanotube Buckypaper
Membranes With Tunable Pore Sizes. 19th
Annual International Conference on Composites
or Nano Engineering (ICCE 2011), publisher:
Publications for Andrew Harris
publisher.
Liang, W., Harris, A. (2011). Facile size and
shape control of templated Au nanoparticles
under microwave irradiation. Materials Letters,
65(14), 2307-2310. <a
href="http://dx.doi.org/10.1016/j.matlet.2011.04.
075">[More Information]</a>
lukman, A., Gong, B., Marjo, C., Roessner, U.,
Harris, A. (2011). Facile synthesis, stabilization,
and anti-bacterial performance of discrete Ag
nanoparticles using Medicago sativa seed
exudates. Journal of Colloid and Interface
Science, 353, 433-444. <a
href="http://dx.doi.org/10.1016/j.jcis.2010.09.08
8">[More Information]</a>
Hanus, M., Harris, A. (2011). Fixed- and
fluidised-bed synthesis of coiled carbon fibres on
in situ generated H2S-modified Ni/Al2O3
catalysts. Carbon 2011, publisher: publisher.
Harris, A. (2011). Flame stability of ultra-lean
methane and synthesis-gas combustion in inert
porous burners. International Gas Union
Research Conference 2011, publisher: publisher.
Widyawati, M., Church, T., Florin, N., Harris, A.
(2011). Hydrogen synthesis from biomass
pyrolysis with in situ carbon dioxide capture
using calcium oxide. International Journal of
Hydrogen Energy, 36(8), 4800-4813. <a
href="http://dx.doi.org/10.1016/j.ijhydene.2010.
11.103">[More Information]</a>
Zhao, M., Yang, X., Church, T., Harris, A.
(2011). Interaction between a bimetallic Ni-Co
catalyst and micrometer-sized CaO for enhanced
H2 production during cellulose decomposition.
International Journal of Hydrogen Energy,
36(1), 421-431. <a
href="http://dx.doi.org/10.1016/j.ijhydene.2010.
09.053">[More Information]</a>
Zhao, M., Yang, X., Church, T., Harris, A.
(2011). Interaction between a bimetallic Ni-Co
catalyst and micrometer-sized CaO for enhanced
H2 production during celluose decomposition.
International Journal of Hydrogen Energy,
37(2), 421-431. <a
href="http://dx.doi.org/10.1016/j.ijhydene.2010.
09.053">[More Information]</a>
Oubani, H., Abbas, A., Harris, A. (2011).
Investigating the Mechanical Pretreatment of
Cellulose by High Intensity Ultrsound and Ball
Milling. Chemeca 2011: Engineering a Better
World, Sydney: Engineers Australia.
Zhao, M., Harris, A. (2011). Novel SiO2
supported CaO sorbent and bifunctional
Ni/Co-CaO/SiO2 complex for
sorption-and-catalysis-enhanced H2 production
from biomass gasification. 241st American
Chemical Society (ACS) National Meeting &
Exposition 2011, United States: American
Chemical Society.
Yang, X., Yuan, L., Peterson, V., Yin, Y.,
Minett, A., Harris, A. (2011). Open-Ended
Aligned Carbon Nanotube Arrays Produced
Using CO2-Assisted Floating-Ferrocene
Chemical Vapor Deposition. The Journal of
Physical Chemistry Part C: Nanomaterials and
Interfaces, 115(29), 14093-14097. <a
href="http://dx.doi.org/10.1021/jp203469y">[M
ore Information]</a>
MacKenzie, K., Dunens, O., Hanus, M., Harris,
A. (2011). Optimisation of microwave-assisted
acid digestion
for the purification of supported carbon
nanotubes. Carbon, 49(13), 4179-4190. <a
href="http://dx.doi.org/10.1016/j.carbon.2011.05
.052">[More Information]</a>
Hanus, M., MacKenzie, K., King, A., Dunens,
O., Harris, A. (2011). Parametric Study of Coiled
Carbon Fibre Synthesis on an In Situ Generated
H2S-modified Ni/Al2O3 Catalyst. Carbon,
49(13), 4159-4169. <a
href="http://dx.doi.org/10.1016/j.carbon.2011.05
.050">[More Information]</a>
Miralles, P., Liu, J., Johnson, E., Harris, A.
(2011). Phytoxicity and Uptake of Carbon
Nanotubes. Chemeca 2011: Engineering a Better
World, Sydney: Engineers Australia.
Minett, A., Harris, A. (2011). Post-treatment of
carbon nanotube electrodes and the effects on
device performance. ARC Centre of Excellence
for Electromaterials Science: Electromaterials
Symposium 2011, publisher: publisher.
Yang, X., Harris, A. (2011). Preparation of
free-standing carbon nanotube arrays from
chemical vapour deposition. International
conference on composites and nano-engineering
(ICCE-19), publisher: publisher.
Zhao, M., Church, T., Harris, A. (2011). SBA-15
supported Ni-Co bimetallic catalysts for
enhanced hydrogen production during cellulose
decomposition. Applied Catalysis B:
Environmental, 101(3-4), 522-530. <a
href="http://dx.doi.org/10.1016/j.apcatb.2010.10.
024">[More Information]</a>
Liu, J., Yuan, L., Yang, X., Ebert, A., Harris, A.
(2011). Synthesis of vertically aligned carbon
nanotube arrays on polyhedral Fe/Al2O3
catalysts. Chemical Communications, 47(22),
6434-6436. <a
href="http://dx.doi.org/10.1039/c1cc10878f">[M
ore Information]</a>
2010
MacKenzie, K., Dunens, O., Harris, A. (2010).
An Updated Review of Synthesis Parameters and
Publications for Andrew Harris
Growth Mechanisms for Carbon Nanotubes in
Fluidized Beds. Industrial and Engineering
Chemistry Research, 49(11), 5323-5338. <a
href="http://dx.doi.org/10.1021/ie9019787">[Mo
re Information]</a>
Dunens, O., MacKenzie, K., Harris, A. (2010).
Automated High Throughput Chemical Vapour
Deposition Reactor for Carbon Nanotube
Synthesis. 5th International Conference on
Surfaces, Coatings and Nanostructured
Materials (NANOSMAT).
in poly(4-vinylpyridine)/polystyrene bilayers.
Langmuir: the ACS journal of surfaces and
colloids, 26(20), 15989-15999.
Dunens, O., MacKenzie, K., Harris, A. (2010).
Large-Scale Synthesis of Double Walled Carbon
Nanotubes in Fluidised Beds. Industrial and
Engineering Chemistry Research, 49(9),
4031-4035. <a
href="http://dx.doi.org/10.1021/ie100059q">[Mo
re Information]</a>
Bali, R., Siegele, R., Harris, A. (2010). Biogenic
Pt Uptake and Nanoparticle Formation in
Medicago Sativa and Brassica Juncea. Journal of
Nanoparticle Research, 12(8), 3087-3095. <a
href="http://dx.doi.org/10.1007/s11051-010-990
4-7">[More Information]</a>
Zhao, M., Florin, N., Harris, A. (2010).
Mesoporous supported cobalt catalysts for
enhanced hydrogen production during cellulose
decomposition. Applied Catalysis B:
Environmental, 97(1 to 2), 142-150. <a
href="http://dx.doi.org/10.1016/j.apcatb.2010.03.
034">[More Information]</a>
Bali, R., Siegele, R., Harris, A. (2010). Biogenic
separation, accumulation and cellular distribution
of Cu, Co, and Ni in medicago sativa under
idealized conditions. Separation Science and
Technology, 45(10), 1395-1401. <a
href="http://dx.doi.org/10.1080/0149639100368
1014">[More Information]</a>
Lu, C., Liu, J., Xiao, K., Harris, A. (2010).
Microwave enhanced synthesis of MOF-5 and its
CO2 capture ability at moderate temperatures
across multiple capture and release cycles.
Chemical Engineering Journal, 156, 465-470. <a
href="http://dx.doi.org/10.1016/j.cej.2009.10.067
">[More Information]</a>
Bali, R., Harris, A. (2010). Biogenic Synthesis of
Au Nanoparticles using Vascular Plants.
Industrial and Engineering Chemistry Research,
49(24), 12762-12772. <a
href="http://dx.doi.org/10.1021/ie101600m">[M
ore Information]</a>
Bali, R., Siegele, R., Harris, A. (2010).
Phytoextraction of Au: Uptake, accumulation
and cellular distribution by Medicago sativa and
Brassica juncea. Chemical Engineering Journal,
156, 286-297. <a
href="http://dx.doi.org/10.1016/j.cej.2009.10.019
">[More Information]</a>
Zhao, M., Florin, N., Harris, A. (2010).
Combination of Mesoporous Supported
Bimetallic Ni/Co Catalyst and CaO Sorbent for
Enhanced Hydrogen Production from Biomass.
6th International Conference on Environmental
Catalysis ICEC 2010.
Tierney, C., Wood, S., Harris, A., Fletcher, D.
(2010). Computational Fluid Dynamics
Modelling of Ultra-lean Porous Burners.
Progress in Computational Fluid Dynamics,
10(5-6), 352-365. <a
href="http://dx.doi.org/10.1504/PCFD.2010.035
369">[More Information]</a>
Harris, A., Maddocks, A., Braham, R. (2010).
Correlating the surface area and synthesis
conditions of block co-polymer templated
mesoporous silica. Asia-Pacific Journal of
Chemical Engineering, 5(3), 527-532.
Hanus, M., Linkson, P., Harris, A. (2010). Fixedand Fluidised-Bed Synthesis of Coiled Carbon
Fibres on an In Situ Generated H2S-Modified
Ni/Al2O3 Catalyst from a NiSO4/Al2O3
Precursor. Carbon, 48(13), 3931-3938. <a
href="http://dx.doi.org/10.1016/j.carbon.2010.06
.060">[More Information]</a>
Thickett, S., Harris, A., Neto, C. (2010).
Interplay between dewetting and layer inversion
MacKenzie, K., Dunens, O., Harris, A. (2010).
Purification of Alumina Supported Carbon
Nanotubes by Microwave Assisted Acid
Digestion. 5th International Conference on
Surfaces, Coatings and Nanostructured
Materials (NANOSMAT).
Liu, J., Ebert, A., Variava, M., Dehghani, F.,
Harris, A. (2010). Surface Modification and Pt
Functionalisation of Multi-walled Carbon
Nanotubes in Methanol Expanded with
Supercritical CO2. Chemical Engineering
Journal, 165(3), 974-979. <a
href="http://dx.doi.org/10.1016/j.cej.2010.10.008
">[More Information]</a>
lukman, A., Harris, A. (2010). Synthesis of Ag
and Au Nanoparticles in Aqueous Solutions
Mediated by Naturally Occurring Compounds in
Common Sprouting Seed Exudates. 11th Edition
of Trends in Nanotechnology International
Conference.
Liu, J., Harris, A. (2010). Synthesis of coiled
carbon nanotubes on Co/Al2O3 catalysts in a
fluidised-bed. Journal of Nanoparticle Research,
12, 645-653. <a
href="http://dx.doi.org/10.1007/s11051-009-963
4-x">[More Information]</a>
Publications for Andrew Harris
Dunens, O., MacKenzie, K., Harris, A. (2010).
Synthesis of Multi-Walled Carbon Nanotubes on
'Red Mud' Catalysts. Carbon, 48(8), 2375-2377.
<a
href="http://dx.doi.org/10.1016/j.carbon.2010.02
.039">[More Information]</a>
Liu, J., Harris, A. (2010). Synthesis of
multiwalled carbon nanotubes on Al2O3
supported Ni catalysts in a fluidized-bed. AIChE
Journal, 56(1), 102-113. <a
href="http://dx.doi.org/10.1002/aic.11974">[Mor
e Information]</a>
Hanus, M., Harris, A. (2010). Synthesis of
Twisted Carbon Fibres Comprised of Four
Intertwined Helical Strands. Carbon, 48(10),
2989-2992. <a
href="http://dx.doi.org/10.1016/j.carbon.2010.03
.070">[More Information]</a>
Hanus, M., Harris, A. (2010). Synthesis,
Characterisation and Applications of Coiled
Carbon Nanotubes. Journal of Nanoscience and
Nanotechnology, 10(4), 2261-2283. <a
href="http://dx.doi.org/10.1166/jnn.2010.1912">
[More Information]</a>
2009
MacKenzie, K., Dunens, O., Harris, A. (2009). A
review of carbon nanotube purification by
microwave assisted acid digestion. Separation
and Purification Technology, 66(2), 209-222.
Maddocks, A., Harris, A. (2009). Biotemplated
synthesis of novel porous SiC. Materials Letters,
63(9-10), 748-750. <a
href="http://dx.doi.org/10.1016/j.matlet.2008.12.
039">[More Information]</a>
See, C., Husin, A., Harris, A. (2009). Carbonated
Water Purification of Carbon Nanotubes
Synthesized on Fe-CaCO3 Catalysts. Chemical
Engineering and Technology, 32(8), 1280-1284.
<a
href="http://dx.doi.org/10.1002/ceat.200800636"
>[More Information]</a>
Harris, A., Maddocks, A., Braham, R. (2009).
Correlating the surface area and synthesis
conditions of block co-polymer templated
mesoporous silica. Asia-Pacific Journal of
Chemical Engineering, 5(3), 527-532. <a
href="http://dx.doi.org/10.1002/apj.360">[More
Information]</a>
Wood, S., Fletcher, D., Joseph, S., Dawson, A.,
Harris, A. (2009). Design and evaluation of a
porous burner for the mitigation of
anthropogenic methane emissions.
Environmental Science and Technology, 43(24),
9329-9334. <a
href="http://dx.doi.org/10.1021/es902367x">[M
ore Information]</a>
Harris, A. (2009). Development of contemporary
problem-based learning projects - in particle
technology. Chemical Engineering Education,
43(4), 322-328.
Florin, N., Maddocks, A., Wood, S., Harris, A.
(2009). High-temperature thermal destruction of
poultry derived wastes for energy recovery in
Australia. Waste Management, 29(4), 1399-1408.
<a
href="http://dx.doi.org/10.1016/j.wasman.2008.1
0.002">[More Information]</a>
Harris, A., Naidoo, K., Nokes, J., Walker, T.,
Orton, F. (2009). Indicative assessment of the
feasibility of Ni and Au phytomining in
Australia. Journal of Cleaner Production, 17(2),
194-200. <a
href="http://dx.doi.org/10.1016/j.jclepro.2008.04
.011">[More Information]</a>
Liu, J., Harris, A. (2009). Industrially scalable
process to separate catalyst substrate materials
from MWNTs synthesised by fluidised-bed CVD
on iron/alumina catalysts. Chemical Engineering
Science, 64, 1511-1521. <a
href="http://dx.doi.org/10.1016/j.ces.2008.12.03
5">[More Information]</a>
Zhao, M., Harris, A. (2009). Investigations of
catalysts, CO2 sorbents and their combinations
for maximizing hydrogen output from the
gasification of biomass. International
Conference of the Society for Sustainability and
Environmental Engineering SSEE 2009,
Australia: Society for Sustainability and
Environmental Engineering.
Tierney, C., Harris, A. (2009). Materials design
and selection issues in ultra-lean porous burners.
Journal of the Australian Ceramics Society,
45(2), 20-29.
See, C., MacKenzie, K., Dunens, O., Harris, A.
(2009). Multi-parameter optimisation of carbon
nanotube synthesis in fluidised-beds. Chemical
Engineering Science, 64(16), 3614-3621. <a
href="http://dx.doi.org/10.1016/j.ces.2009.05.00
3">[More Information]</a>
Zhao, M., Harris, A. (2009). Ni/MCM-41 and
Co/MCM-41 Catalysts for Enhanced H2
Production from Biomass. 8th World Congress
of Chemical Engineering WCCE 2009, Canada:
Canadian Society for Chemical Engineering.
Zhao, M., Harris, A. (2009). Novel Catalysts for
Enhanced Hydrogen Production from Biomass.
Catalysis: A Major Key to Sustainability 2005,
N/A: N/A.
Florin, N., Harris, A. (2009). Reactivity of CaO
derived from nano-sized CaCO3 particles
through multiple CO2 capture-and-release
cycles. Chemical Engineering Science, 64(2),
187-191. <a
Publications for Andrew Harris
href="http://dx.doi.org/10.1016/j.ces.2008.10.02
1">[More Information]</a>
Braham, R., Harris, A. (2009). Review of Major
Design and Scale-up Considerations for Solar
Photocatalytic Reactors. Industrial and
Engineering Chemistry Research, 48,
8890-8905. <a
href="http://dx.doi.org/10.1021/ie900859z">[Mo
re Information]</a>
Yang, Z., Zhao, M., Florin, N., Harris, A. (2009).
Synthesis and characterization of CaO nano-pods
for high temperature CO2 capture. Industrial and
Engineering Chemistry Research, 48(24),
10765-10770. <a
href="http://dx.doi.org/10.1021/ie901137s">[Mo
re Information]</a>
Co-Fe catalysts for carbon nanotube synthesis in
fluidized bed reactors. AIChE Journal, 54(3),
657-664. <a
href="http://dx.doi.org/10.1002/aic.11403">[Mor
e Information]</a>
Harris, A., Briscoe-Andrews, S. (2008).
Development of a problem-based learning
elective in "green engineering". Education for
Chemical Engineers, 3(1), e15-e21. <a
href="http://dx.doi.org/10.1016/j.ece.2007.12.00
1">[More Information]</a>
MacKenzie, K., See, C., Dunens, O., Harris, A.
(2008). Do single-walled carbon nanotubes occur
naturally? Nature Nanotechnology, 3(6),
310-310.
Harris, A., Deshpande, S., Xiao, K. (2009).
Synthesis of graphitic carbon particle chains at
low temperatures under microwave irradiation.
Materials Letters, 63(16), 1390-1392. <a
href="http://dx.doi.org/10.1016/j.matlet.2009.03.
027">[More Information]</a>
Florin, N., Harris, A. (2008). Enhanced hydrogen
production from biomass with in situ carbon
dioxide capture using calcium oxide sorbents.
Chemical Engineering Science, 63(2), 287-316.
<a
href="http://dx.doi.org/10.1016/j.ces.2007.09.01
1">[More Information]</a>
Dunens, O., MacKenzie, K., Harris, A. (2009).
Synthesis of multi-walled carbon nanotubes on
fly-ash derived catalysts. Environmental Science
and Technology, 43, 7889-7894. <a
href="http://dx.doi.org/10.1021/es901779c">[M
ore Information]</a>
Maddocks, A., Hook, J., Stender, H., Harris, A.
(2008). Heterogeneously catalysed crosslinking
of polycarbosilane with divinylbenzene. Journal
of Materials Science, 43(8), 2666-2674. <a
href="http://dx.doi.org/10.1007/s10853-008-248
8-2">[More Information]</a>
Maddocks, A., Cassidy, D., Jones, A., Harris, A.
(2009). Synthesis of nanoporous silicon carbide
via the preceramic polymer route. Materials
Chemistry and Physics, 113(2-3), 861-867. <a
href="http://dx.doi.org/10.1016/j.matchemphys.2
008.08.064">[More Information]</a>
Dunens, O., MacKenzie, K., See, C., Harris, A.
(2008). Inconsistencies in the carbon nanotube
patent space: A scientific perspective.
Nanotechnology Law and Business, 5(1), 25-40.
Harris, A., Maddocks, A. (2009). Synthesis of
porous silicon carbide from cellulose fibre
templates infiltrated with polycarbosilane.
Materials Science and Technology, 26(3),
375-378. <a
href="http://dx.doi.org/10.1179/174328409X418
982">[More Information]</a>
Zhao, M., Florin, N., Harris, A. (2009). The
influence of supported Ni catalysts on the
product gas distribution and H2 yield during
cellulose pyrolysis. Applied Catalysis B:
Environmental, 92(1-2), 185-193. <a
href="http://dx.doi.org/10.1016/j.apcatb.2009.07.
011">[More Information]</a>
2008
See, C., Harris, A. (2008). A comparison of
carbon nanotube synthesis in fixed and fluidised
bed reactors. Chemical Engineering Journal,
144(2), 267-269. <a
href="http://dx.doi.org/10.1016/j.cej.2008.06.002
">[More Information]</a>
See, C., Harris, A. (2008). CaCO3 supported
MacKenzie, K., Dunens, O., See, C., Harris, A.
(2008). Large-scale carbon nanotube synthesis.
Recent Patents on Nanotechnology, 2(1), 25-40.
<a
href="http://dx.doi.org/10.2174/1872210087834
78617">[More Information]</a>
Florin, N., Harris, A. (2008). Mechanistic study
of enhanced H2 synthesis in biomass gasifiers
with in-situ CO2 capture using CaO. AIChE
Journal, 54(4), 1096-1109. <a
href="http://dx.doi.org/10.1002/aic.11434">[Mor
e Information]</a>
Liu, J., Harris, A. (2008). Microwave-assisted
acid digestion of alumina-supported carbon
nanotubes. Separation and Purification
Technology, 62(3), 602-608. <a
href="http://dx.doi.org/10.1016/j.seppur.2008.03.
016">[More Information]</a>
Harris, A., Zhong, Z. (2008). Non-isothermal
thermogravimetric analysis of plywood wastes
under N2, CO2 and O2 atmospheres.
Asia-Pacific Journal of Chemical Engineering,
3(5), 473-480. <a
href="http://dx.doi.org/10.1002/apj.170">[More
Information]</a>
Publications for Andrew Harris
Harris, A., Bali, R. (2008). On the formation and
extent of uptake of silver nanoparticles by live
plants. Journal of Nanoparticle Research, 10(4),
691-695. <a
href="http://dx.doi.org/10.1007/s11051-007-928
8-5">[More Information]</a>
Harris, A. (2008). On the vibration assisted
fluidisation of silica nanoparticles. International
Journal of Nanotechnology, 5(2-3), 179-194. <a
href="http://dx.doi.org/10.1504/IJNT.2008.0169
15">[More Information]</a>
MacKenzie, K., Dunens, O., See, C., Harris, A.
(2008). Parametric study of carbon nanotube
synthesis in fluidised beds. International
Conference on Nanoscience and Nanotechnology
2008, USA: (IEEE) Institute of Electrical and
Electronics Engineers.
Wood, S., Harris, A. (2008). Porous burners for
lean-burn applications. Progress in Energy and
Combustion Science, 34(5), 667-684. <a
href="http://dx.doi.org/10.1016/j.pecs.2008.04.0
03">[More Information]</a>
Journal of Nanoscience and Nanotechnology,
8(5), 2450-2457.
Harris, A., Riddlestone, S., Bell, Z., Hartwell, P.
(2008). Towards zero emission pulp and paper
production: the BioRegional MiniMill. Journal
of Cleaner Production, 16(18), 1971-1979. <a
href="http://dx.doi.org/10.1016/j.jclepro.2008.02
.005">[More Information]</a>
2007
MacKenzie, K., Dunens, O., See, C., Harris, A.
(2007). A Parametric Study of Carbon Nanotube
Synthesis
in Fluidised Beds. <i>2007 CHEMECA
Academia and Industry Strengthening the Profession</i>, Australia:
Engineers Australia.
See, C., Harris, A. (2007). A review of carbon
nanotube synthesis via fluidized-bed chemical
vapor deposition. Industrial and Engineering
Chemistry Research, 46(4), 997-1012.
Liu, J., Dunens, O., MacKenzie, K., See, C.,
Harris, A. (2008). Postsynthesis microwave
treatment to give high-purity multiwalled carbon
nanotubes. AIChE Journal, 54(12), 3303-3307.
<a
href="http://dx.doi.org/10.1002/aic.11641">[Mor
e Information]</a>
Harris, A. (2007). Development of a problem
based learning elective in "Green Engineering".
<i>2007 CHEMECA
Florin, N., Harris, A. (2008). Preparation and
characterization of a tailored carbon dioxide
sorbent for enhanced hydrogen synthesis in
biomass gasifier. Industrial and Engineering
Chemistry Research, 47(7), 2191-2202. <a
href="http://dx.doi.org/10.1021/ie070980x">[Mo
re Information]</a>
See, C., Harris, A. (2007). Development of an
Advanced Catalyst for Carbon
See, C., Dunens, O., MacKenzie, K., Harris, A.
(2008). Process parameter interaction effects
during carbon nanotube synthesis in fluidized
bed. Industrial and Engineering Chemistry
Research, 47(20), 7686-7692. <a
href="http://dx.doi.org/10.1021/ie701786p">[Mo
re Information]</a>
Florin, N., Harris, A. (2007). Enhanced H2
production from biomass coupled with CO2
capture using CaO. <i>2007 CHEMECA
Florin, N., Harris, A. (2008). Screening
CaO-based sorbents for CO2 Capture in biomass
gasifiers. Energy and Fuels, 22(4), 2734-2742.
<a
href="http://dx.doi.org/10.1021/ef700751g">[M
ore Information]</a>
Florin, N., Harris, A. (2007). Hydrogen
production from biomass. 9th Annual Australian
Environmental Research Conference, Dordrecht,
The Netherlands: Springer. <a
href="http://dx.doi.org/10.1007/s10669-007-902
7-6">[More Information]</a>
See, C., Harris, A. (2008). Towards
high-throughput carbon nanotube synthesis.
International Conference on Nanoscience and
Nanotechnology 2008, USA: (IEEE) Institute of
Electrical and Electronics Engineers.
Harris, A., See, C., Liu, J., Dunens, O.,
MacKenzie, K. (2007). Large-Scale Synthesis of
Carbon Nanotubes in Fluidised Beds. Journal of
Nanoscience and Nanotechnology, 8(5), 1-8.
Harris, A., See, C., Liu, J., Dunens, O.,
MacKenzie, K. (2008). Towards the large-scale
synthesis of carbon nanotubes in fluidised beds.
Academia and Industry Strengthening the Profession</i>, Australia:
Engineers Australia.
Nanotube Synthesis. <i>2007 CHEMECA
Academia and Industry Strengthening the Profession</i>, Australia:
Engineers Australia.
Academia and Industry Strengthening the Profession</i>, Australia:
Engineers Australia.
See, C., Harris, A. (2007). On the development
of fluidized bed chemical vapour deposition for
large-scale carbon nanotube synthesis: Influence
of synthesis temperature. Australian Journal of
Publications for Andrew Harris
Chemistry, 60(7), 541-546.
Maddocks, A., Harris, A. (2007). Preparation of
nanoporous silicon carbide materials
for high temperature gas separation applications.
<i>2007 CHEMECA
Academia and Industry Strengthening the Profession</i>, Australia:
Engineers Australia.
Liu, J., Harris, A. (2007). Purification of
multi-walled carbon nanotubes
synthesized by fluidised-bed chemical vapour
deposition. <i>2007 CHEMECA
Academia and Industry Strengthening the Profession</i>, Australia:
Engineers Australia.
See, C., Harris, A. (2007). Spent FCC catalysts:
An untapped resource of carbon nanotubes?
AIChE Journal, 53(8), 2198-2220. <a
href="http://dx.doi.org/10.1002/aic.11237">[Mor
e Information]</a>
Bali, R., Harris, A. (2007). The Synthesis of
Metallic Nanoparticles Inside Live
Plants. <i>2007 CHEMECA
Academia and Industry Strengthening the Profession</i>, Australia:
Engineers Australia.
2006
See, C., Harris, A. (2006). A Scalable Technique
for the Synthesis of Carbon Nanotubes.
International Conference on Nanoscience and
Nanotechnology 2006, Brisbane, Australia:
(IEEE) Institute of Electrical and Electronics
Engineers.
Riddlestone, S., Hartwell, P., Harris, A. (2006).
BioRegional MiniMill Technology. TAPPI
Engineering, Pulping, Environmental
Conference, Atlanta, Georgia, USA: TAPPI.
Harris, A., See, C. (2006). Carbon nanotubes; a
solution in large scale synthesis. G I T
Laboratory Journal Europe.
Gomes, V., Barton, G., Petrie, J., Romagnoli, J.,
Holt, P., Abbas, A., Cohen, B., Harris, A.,
Haynes, B., Langrish, T., Orellana, J., See, H.,
Valix, M., White, D. (2006). Chemical
Engineering Curriculum renewal. Education for
Chemical Engineers, 1(1), 116-125.
Wood, S., Fletcher, D., Joseph, M., Dawson, A.,
Harris, A. (2006). Design of a porous burner for
the oxidation of methane in mine ventilation air.
CHEMECA 2006 Knowledge and Innovation,
Auckland, New Zealand: Auckland University
Press.
See, C., Harris, A. (2006). Fluidised Bed
Synthesis of Carbon Nanotubes. Australian
National Science Graduate Conference, Sydney.
Florin, N., Harris, A. (2006). H2 Production
from Biomass Coupled with CO2 Capture :
Development of a Tailored CO2 sorbent.
CHEMECA 2006 Knowledge and Innovation,
Auckland, New Zealand: Auckland University
Press.
Min, A., Harris, A. (2006). Influence of Carbon
Dioxide Partial Pressure and Fluidization
Velocity on Activated Carbons Prepared from
Scrap Car Tyre in a Fluidized Bed. Chemical
Engineering Science, 61(24), 8050-8059. <a
href="http://dx.doi.org/10.1016/j.ces.2006.09.04
7">[More Information]</a>
Gardner, S., Fletcher, D., Joseph, M., Dawson,
A., Harris, A. (2006). On the design of a porous
burner for the oxidation of methane in mine
ventilation air. Australian National Science
Graduate Conference, Sydney.
Maddocks, A., Harris, A. (2006). Renewable
hydrogen from biomass using advanced ceramic
membranes for gas separation. Australian
National Science Graduate Conference, Sydney.
Florin, N., Harris, A. (2006). Renewable
Hydrogen Production from Biomass Coupled
with Carbon Dioxide Capture. Australian
National Science Graduate Conference, Sydney.
Bali, R., A Razak, N., Harris, A. (2006). The
synthesis of metallic nanoparticles inside live
plants. International Conference on Nanoscience
and Nanotechnology 2006, Brisbane, Australia:
(IEEE) Institute of Electrical and Electronics
Engineers.
Shakya, B., Harris, A. (2006). Towards the
development of a solar reactor system for the
gasification of plastic wastes. Australian
National Science Graduate Conference, Sydney.
Harris, A., See, C. (2006). Towards the large
scale synthesis of carbon nanomaterials using
fluidised bed technology. CHEMECA 2006
Knowledge and Innovation, Auckland, New
Zealand: Auckland University Press.
Liu, J., Wong, T., Harris, A. (2006). Towards the
mass production of spiral carbon nanotubes by
fluidised bed catalytic chemical vapour
deposition. Australian National Science
Graduate Conference, Sydney.
Harris, A., Bali, R. (2006). Using plants as
biological nano-factories to synthesize metallic
nanoparticles. CHEMECA 2006 Knowledge and
Innovation, Auckland, New Zealand: Auckland
University Press.
2005
Harris, A., Riddlestone, S., Hartwell, P. (2005).
Publications for Andrew Harris
BioRegional Mini Mill Technology.
International Trade Fair and Conference on
Pulp, Paper and Conversion, New Delhi:
Inpaper International.
fluidised bed riser. Chemical Engineering
Science, 58(16), 3669-3680.
Harris, A. (2005). The future of mining? The
Chemical Engineer (London), May(767), 40-41.
Harris, A., Davidson, J., Thorpe, R. (2002). A
novel method for measuring the residence time
distribution in short time scale particulate
systems. Chemical Engineering Journal, 89(1-3),
127-142.
2004
Harris, A., Scott, S., Dennis, J., Hayhurst, A.,
Davidson, J. (2004). Combustion of sewage
sludge in bubbling fluidised beds. 11th
International Conference on Fluidization 2004,
United States: Engineering Conferences
International.
2002
Harris, A., Thorpe, R., Davidson, J. (2002).
Characterisation of the annular film thickness in
circulating fluidised-bed risers. Chemical
Engineering Science, 57(13), 2579-2587.
Harris, A., Shehedie, J. (2004). The production
of activated carbon from scrap tyres. Chemeca
2004 - Australasian Conference on Chemical
Engineering, Australia: Curran Associates, Inc.
Harris, A., Thorpe, R., Davidson, J. (2002).
Scale-up of the exit effect in circulating fluidised
bed risers. World Congress on Particle
Technology 4, Sydney, Australia:
WCPT4/IEAust.
Harris, A., Riddlestone, S., Hartwell, P., Wei, D.
(2004). Towards sustainable paper production:
The BioRegional MiniMill. 2nd United Nations
International Congress on Environmental
Concerns (ICEC2004), Xiamen, China.
Harris, A., Thorpe, R., Davidson, J. (2002).
Stochastic modelling of the particle residence
time distribution in circulating fluidised bed
risers. Chemical Engineering Science, 57(22),
4779-4796.
Harris, A., O'Neill, B. (2004). Towards the
development of nickel phytomining. Chemeca
2004 - Australasian Conference on Chemical
Engineering, Australia: Curran Associates, Inc.
Harris, A., Thorpe, R., Davidson, J. (2002). The
measurement of particle residence time
distributions in circulating fluidised beds. 7th
International Conference on Circulating
Fluidised Beds, Canadian Society of Chemical
Engineering.
Harris, A., Thordarson, P., Wong, T. (2004).
Towards The Large Scale Synthesis Of Carbon
Nanotubes In Fluidised Beds. Chemeca 2004 Australasian Conference on Chemical
Engineering, Australia: Curran Associates, Inc.
2003
Harris, A., Davidson, J., Thorpe, R. (2003).
Influence of exit geometry in circulating
fluidised bed risers. AIChE Journal, 49(1),
52-64.
Harris, A., Davidson, J., Thorpe, R. (2003).
Particle residence time distributions in
circulating fluidised beds. Chemical Engineering
Science, 58(11), 2181-2202.
Scott, S., Harris, A., Dennis, J., Hayhurst, A.,
Davidson, J. (2003). The gasification of biomass:
the consequences of equilibrium. 17th
International Conference on Fluidised Bed
Combustion, Jacksonville, Florida. American
Society of Mechanical Engineers (ASME).
Harris, A., Scott, S., Dennis, J., Hayhurst, A.,
Davidson, J. (2003). The gasification of sewage
sludge in a bubbling fluidised beds. 17th
International Conference on Fluidised Bed
Combustion, Jacksonville, Florida. American
Society of Mechanical Engineers (ASME).
Harris, A., Davidson, J., Thorpe, R. (2003). The
influence of the riser exit on the particle
residence time distribution in a circulating
Harris, A., Davidson, J., Thorpe, R. (2002). The
prediction of particle cluster properties in the
near wall region of a vertical riser (200157).
Powder Technology, 127(2), 128-143.
2001
Harris, A., Thorpe, R., Davidson, J. (2001).
Residence Time Distributions in Circulating
Fluidised Beds - Dimensional Analysis and
Correlation. 10th International Conference on
Fluidisation: Fluidisation for sustainable
development, Engineering Foundation, New
York.