Publications for Ali Abbas
Publications for Ali Abbas
2016
Abdul Manaf, N., Qadir, A., Abbas, A. (2016).
Agile Control of CO2 Capture Technology for
Maximum Operations Revenue. 11th IFAC
Symposium on Dynamics and Control of Process
Systems including Biosystems (DYCOPS-CAB
2016), Norway: Elsevier.
Luu, M., Milani, D., Abbas, A. (2016). Analysis
of CO2 utilization for methanol synthesis
integrated with enhanced gas recovery. Journal
of Cleaner Production, 112, 3540-3554. <a
href="http://dx.doi.org/10.1016/j.jclepro.2015.10
.119">[More Information]</a>
Luu, M., Milani, D., Wake, M., Abbas, A.
(2016). Analysis of di-methyl ether production
routes: Process performance evaluations at
various syngas compositions. Chemical
Engineering Science, 149, 143-155. <a
href="http://dx.doi.org/10.1016/j.ces.2016.04.01
9">[More Information]</a>
Shafiee, A., Arab, M., Lai, Z., Liu, Z., Abbas, A.
(2016). Automated process flowsheet synthesis
for membrane processes using genetic algorithm:
role of crossover operators. <i>26th European
Symposium on Computer-Aided Process
Engineering (ESCAPE 26)</i>, Solvenia:
Elsevier.
Abdul Manaf, N., Cousins, A., Feron, P., Abbas,
A. (2016). Dynamic modelling, identification
and preliminary control analysis of
an amine-based post-combustion CO2 capture
pilot plant. Journal of Cleaner Production, 113,
635-653. <a
href="http://dx.doi.org/10.1016/j.jclepro.2015.11
.054">[More Information]</a>
Abbas, A., Khalilpour, R. (2016). Editorial Special issue on “Flexible operation of carbon
capture plants". International Journal of
Greenhouse Gas Control, 48, 187. <a
href="http://dx.doi.org/10.1016/j.ijggc.2016.02.0
26">[More Information]</a>
Luu, M., Milani, D., Sharma, M., Zeaiter, J.,
Abbas, A. (2016). Model-based analysis of CO₂
revalorization for di-methyl ether synthesis
driven by solar catalytic reforming. Applied
Energy, 177(1), 863-878. <a
href="http://dx.doi.org/10.1016/j.apenergy.2016.
04.119">[More Information]</a>
Abdul Manaf, N., Qadir, A., Sharma, M.,
Parvareh, F., Milani, D., Abbas, A. (2016).
Model-based optimisation of highly-integrated
renewables with post-combustion carbon capture
processes - Final Report, 309110168, (pp. 1 125). Sydney, Australia: Laboratory for
Multiscale Systems, The University of Sydney.
Tumilar, A., Sharma, M., Milani, D., Abbas, A.
(2016). Modeling and Simulation Environments
for Sustainable Low-Carbon Energy Production
– A Review. Chemical Product and Process
Modeling, 11(2), 97-124. <a
href="http://dx.doi.org/10.1515/cppm-2015-0035
">[More Information]</a>
Milani, D., Abbas, A. (2016). Multiscale
modeling and performance analysis of evacuated
tube collectors for solar water heaters using
diffuse flat reflector. Renewable Energy, 86,
360-374. <a
href="http://dx.doi.org/10.1016/j.renene.2015.08.
013">[More Information]</a>
Wang, M., Abbas, A. (2016). Natural gas liquids
(NGL) recovery in the liquified natural gas
production. <i>26th European Symposium on
Computer-Aided Process
Engineering (ESCAPE 26)</i>, Solvenia:
Elsevier.
Abdul Manaf, N., Qadir, A., Abbas, A. (2016).
Off-line optimisation and control of carbon
capture
operations. <i>26th European Symposium on
Computer-Aided Process
Engineering (ESCAPE 26)</i>, Solvenia:
Elsevier.
Baghban, A., Bahadori, M., Rozyn, J., Lee, M.,
Abbas, A., Bahadori, A., Rahimali, A. (2016).
Estimation of air dew point temperature using
computational intelligence schemes. Applied
Thermal Engineering, 93, 1043-1052. <a
href="http://dx.doi.org/10.1016/j.applthermaleng
.2015.10.056">[More Information]</a>
Parvareh, F., Sharma, M., Abbas, A. (2016).
Renewable energy integration in liquid
absorbent-based post-combustion CO2 capture
plants. In Paul Ferron (Eds.), Absorption-Based
Post-combustion Capture of Carbon Dioxide,
(pp. 623-648). UK: Woodhead Publishing Ltd.
<a
href="http://dx.doi.org/10.1016/B978-0-08-1005
14-9.00025-1">[More Information]</a>
Hamad, M., Irhimeh, M., Abbas, A. (2016).
Hypercapnia slows down proliferation and
apoptosis of human bone marrow
promyeloblasts. Bioprocess and Biosystems
Engineering, In Press. <a
href="http://dx.doi.org/10.1007/s00449-016-162
4-7">[More Information]</a>
Abdul Manaf, N., Qadir, A., Abbas, A. (2016).
Temporal multiscalar decision support
framework for flexible operation of carbon
capture plants targeting low-carbon management
of power plant emissions. Applied Energy, 169,
912-926. <a
href="http://dx.doi.org/10.1016/j.apenergy.2016.
Publications for Ali Abbas
02.052">[More Information]</a>
2015
Luu, M., Milani, D., Bahadori, A., Abbas, A.
(2015). A comparative study of CO2 utilization
in methanol synthesis with various syngas
production technologies. Journal of CO2
Utilization, 12, 62-76. <a
href="http://dx.doi.org/10.1016/j.jcou.2015.07.0
01">[More Information]</a>
Milani, D., Khalilpour, R., Zahedi, G., Abbas, A.
(2015). A model-based analysis of CO2
utilization in methanol synthesis plant. Journal
of CO2 Utilization, 10, 12-22. <a
href="http://dx.doi.org/10.1016/j.jcou.2015.02.0
03">[More Information]</a>
Arabloo, M., Bahadori, A., Ghiasi, M., Lee, M.,
Abbas, A., Zendehboudi, S. (2015). A novel
modeling approach to optimize oxygen-steam
ratios in coal gasification process. Fuel, 153, 1-5.
<a
href="http://dx.doi.org/10.1016/j.fuel.2015.02.08
3">[More Information]</a>
Abdul Manaf, N., Zanil, M., Hussain, M., Abbas,
A. (2015). Application of hybrid pid-anfis
controller for post combustion CO2 capture
process. Asia Pacific Confederation of Chemical
Engineering Congress 2015: APCChE2015,
incorporating CHEMECA 2015, Melbourne:
Engineers Australia.
Howard, C., Abbas, A., Langrish, T., Fletcher, D.
(2015). Application of proper orthogonal
decomposition (POD) techniques and
scale-resolving CFD simulations to study
swirling flow in an axisymmetric sudden
expansion. Eleventh International Conference on
CFD in the Minerals and Process Industries,
Melbourne, Australia: CSIRO.
Ghiasi, M., Esmaeili-Jaghdan, Z., Halali, M.,
Lee, M., Abbas, A., Bahadori, A. (2015).
Development of soft computing methods to
predict moisture content of natural gases.
Journal of the Taiwan Institute of Chemical
Engineers, 55, 36-41. <a
href="http://dx.doi.org/10.1016/j.jtice.2015.03.0
32">[More Information]</a>
Luu, M., Abdul Manaf, N., Abbas, A. (2015).
Dynamic modelling and control strategies for
flexible operation of amine-based
post-combustion CO2 capture systems.
International Journal of Greenhouse Gas
Control, 39, 377-389. <a
href="http://dx.doi.org/10.1016/j.ijggc.2015.05.0
07">[More Information]</a>
Qadir, A., Carter, L., Wood, T., Abbas, A.
(2015). Economic and policy evaluation of
SPCC (solar-assisted post-combustion carbon
capture) in Australia. Energy, 93, 294-308. <a
href="http://dx.doi.org/10.1016/j.energy.2015.08
.090">[More Information]</a>
Wang, M., Khalilpour, R., Abbas, A. (2015).
Effect of feed natural gas conditions on the
performance of mixed refrigerant LNG process.
<i>25th European Symposium on Computer
Aided Process
Engineering</i>, Denmark: Technical University
of Denmark.
Wang, M., Khalilpour, R., Abbas, A. (2015).
Effect of feed natural gas conditions on the
performance of mixed refrigerant LNG process.
Computer Aided Chemical Engineering, 37,
2309-2314. <a
href="http://dx.doi.org/10.1016/B978-0-444-635
76-1.50079-0">[More Information]</a>
Qadir, A., Sharma, M., Parvareh, F., Khalilpour,
R., Abbas, A. (2015). Flexible dynamic
operation of solar-integrated power plant with
solvent based post-combustion carbon capture
(PCC) process. Energy Conversion and
Management, 97, 7-19. <a
href="http://dx.doi.org/10.1016/j.enconman.2015
.02.074">[More Information]</a>
Hasan, H., Abd Rahim, M., Campbell, L., Carter,
D., Montoya Escobar, A., Abbas, A. (2015).
Genetic Modifications of Aspergillus terreus for
Enhanced Malonyl-CoA Production. Asia Pacific
Confederation of Chemical Engineering
Congress 2015: APCChE2015, incorporating
CHEMECA 2015, Melbourne: Engineers
Australia.
Hamad, M., Irhimeh, M., Abbas, A. (2015).
Growth Of Human KG-1a Stem Cells In
Suspension Bioreactors Under Hypo- And
Hypercapniac Conditions. Asia Pacific
Confederation of Chemical Engineering
Congress 2015: APCChE2015, incorporating
CHEMECA 2015, Melbourne: Engineers
Australia.
Sharma, M., Parvareh, F., Abbas, A. (2015).
Highly integrated post-combustion carbon
capture process in a coal-fired power plant with
solar repowering. International Journal of
Energy Research, 39(12), 1623-1635. <a
href="http://dx.doi.org/10.1002/er.3361">[More
Information]</a>
Abd Rahim, M., Hasan, H., Montoya, A., Abbas,
A. (2015). Lovastatin and (+)-geodin production
by Aspergillus terreus from crude glycerol.
Engineering in Life Sciences, 15(2), 220-228. <a
href="http://dx.doi.org/10.1002/elsc.201400140"
>[More Information]</a>
Khalilpour, R., Mumford, K., Zhai, H., Abbas,
A., Stevens, G., Rubin, E. (2015).
Membrane-based carbon capture from flue gas: a
review. Journal of Cleaner Production, 103,
Publications for Ali Abbas
286-300. <a
href="http://dx.doi.org/10.1016/j.jclepro.2014.10
.050">[More Information]</a>
Sharma, M., Qadir, A., Khalilpour, R., Abbas, A.
(2015). Modeling and analysis of process
configurations for solvent-based
post-combustion carbon capture. Asia-Pacific
Journal of Chemical Engineering, 10(5),
764-780. <a
href="http://dx.doi.org/10.1002/apj.1914">[More
Information]</a>
Bartolini, E., Manoli, H., Costamagna, E.,
Jeyaseelan, H., Hamad, M., Irhimeh, M.,
Khademhosseini, A., Abbas, A. (2015).
Population balance modelling of stem cell
culture in 3D suspension bioreactors. Chemical
Engineering Research and Design, 101, 125-134.
<a
href="http://dx.doi.org/10.1016/j.cherd.2015.07.
014">[More Information]</a>
Parvareh, F., Milani, D., Sharma, M., Chiesa, M.,
Abbas, A. (2015). Solar repowering of
PCC-retrofitted power plants; solar thermal plant
dynamic modelling and control strategies. Solar
Energy, 119, 507-530. <a
href="http://dx.doi.org/10.1016/j.solener.2015.06
.034">[More Information]</a>
2014
Arab, M., Abbas, A. (2014). A model-based
approach for analysis of working fluids in heat
pipes. Applied Thermal Engineering, 73(1),
751-763. <a
href="http://dx.doi.org/10.1016/j.applthermaleng
.2014.08.001">[More Information]</a>
Qadir, A., Sharma, S., Abbas, A. (2014).
Combined in silico optimization of solvents and
operating conditions for carbon capture
processes. Energy Procedia, 63, 415-420. <a
href="http://dx.doi.org/10.1016/j.egypro.2014.11
.043">[More Information]</a>
Abdul Manaf, N., Cousins, A., Feron, P., Abbas,
A. (2014). Control Analysis of Post Combustion
Carbon
Dioxide Capture Process (Pcc). International
Journal of Chemical and Environmental
Engineering, 5(4), 250-254.
Milani, D., Qadir, A., Vassallo, A., Chiesa, M.,
Abbas, A. (2014). Experimentally validated
model for atmospheric water generation using a
solar assisted desiccant dehumidification system.
Energy and Buildings, 77(July), 236-246. <a
href="http://dx.doi.org/10.1016/j.enbuild.2014.0
3.041">[More Information]</a>
Qadir, A., Chiesa, M., Abbas, A. (2014). In silico
design of solvents for carbon capture with
simultaneous optimisation of operating
conditions. International Journal of Greenhouse
Gas Control, 30, 179-187. <a
href="http://dx.doi.org/10.1016/j.ijggc.2014.08.0
23">[More Information]</a>
Parvareh, F., Sharma, M., Qadir, A., Milani, D.,
Khalilpour, R., Chiesa, M., Abbas, A. (2014).
Integration of solar energy in coal-fired power
plants retrofitted with carbon capture: A review.
Renewable and Sustainable Energy Reviews, 38,
1029-1044. <a
href="http://dx.doi.org/10.1016/j.rser.2014.07.03
2">[More Information]</a>
Khalilpour, R., Abbas, A. (2014). Optimal
synthesis and design of solvent-based PCC
process using a rate-based model. Separation
and Purification Technology, 132, 149-167. <a
href="http://dx.doi.org/10.1016/j.seppur.2014.05.
016">[More Information]</a>
Arab, M., Abbas, A. (2014). Optimization-based
design and selection of working fluids for heat
transfer: Case study in heat pipes. Industrial and
Engineering Chemistry Research, 53(2),
920-929. <a
href="http://dx.doi.org/10.1021/ie4026709">[Mo
re Information]</a>
Khayoon, M., Abbas, A., Hameed, B.,
Triwahyono, S., Jalil, A., Harris, A., Minett, A.
(2014). Selective acetalization of glycerol with
acetone over nickel nanoparticles supported on
multi-walled carbon nanotubes. Catalysis
Letters, 144(6), 1009-1015. <a
href="http://dx.doi.org/10.1007/s10562-014-122
1-9">[More Information]</a>
Wang, M., Khalilpour, R., Abbas, A. (2014).
Thermodynamic and economic optimization of
LNG mixed refrigerant processes. Energy
Conversion and Management, 88, 947-961. <a
href="http://dx.doi.org/10.1016/j.enconman.2014
.09.007">[More Information]</a>
2013
Khalilpour, R., Abbas, A., Lai, Z., Pinnau, I.
(2013). Analysis of hollow fibre membrane
systems for multicomponent gas separation.
Chemical Engineering Research and Design,
91(2), 332-347. <a
href="http://dx.doi.org/10.1016/j.cherd.2012.07.
009">[More Information]</a>
Zhang, B., Abbas, A., Romagnoli, J. (2013).
Automatic image-based estimation of texture
analysis as a monitoring tool for crystal growth.
Chemometrics and Intelligent Laboratory
Systems, 121, 42-51. <a
href="http://dx.doi.org/10.1016/j.chemolab.2012.
11.012">[More Information]</a>
Alshehri, A., Khalilpour, R., Abbas, A., Lai, Z.
(2013). Membrane systems engineering for
post-combustion carbon capture. Energy
Publications for Ali Abbas
Procedia, 37, 976-985. <a
href="http://dx.doi.org/10.1016/j.egypro.2013.05
.193">[More Information]</a>
Arab, M., Abbas, A. (2013). Model-based design
and analysis of heat pipe working fluid for
optimal performance in a concentric evacuated
tube solar water heater. Solar Energy, 94(August
2013), 162-176. <a
href="http://dx.doi.org/10.1016/j.solener.2013.03
.029">[More Information]</a>
Wang, M., Khalilpour, R., Abbas, A. (2013).
Operation optimization of propane precooled
mixed refrigerant processes. Journal of Natural
Gas Science and Engineering, 15, 93-105. <a
href="http://dx.doi.org/10.1016/j.jngse.2013.09.0
07">[More Information]</a>
Li, Z., Sharma, M., Khalilpour, R., Abbas, A.
(2013). Optimal operation of solvent-based
post-combustion carbon capture processes with
reduced models. Energy Procedia, 37,
1500-1508. <a
href="http://dx.doi.org/10.1016/j.egypro.2013.06
.025">[More Information]</a>
Qadir, A., Mokhtar, M., Khalilpour, R., Milani,
D., Vassallo, A., Chiesa, M., Abbas, A. (2013).
Potential for solar-assisted post-combustion
carbon capture in Australia. Applied Energy,
111, 175-185. <a
href="http://dx.doi.org/10.1016/j.apenergy.2013.
04.079">[More Information]</a>
Foundation, Qatar: Qatar Foundation.
Khalilpour, R., Abbas, A., Lai, Z., Pinnau, I.
(2012). Modeling and parametric analysis of
hollow fiber
membrane system for carbon capture from
multicomponent flue gas. AIChE Journal, 58(5),
1550-1561. <a
href="http://dx.doi.org/10.1002/aic.12699">[Mor
e Information]</a>
Zhang, B., Abbas, A., Romagnoli, J. (2012).
Monitoring crystal growth based on image
texture analysis using wavelet transformation.
8th IFAC Symposium on Advanced Control of
Chemical Processes, Laxenburg: International
Federation of Automatic Control (IFAC). <a
href="http://dx.doi.org/10.3182/20120710-4-SG2026.00027">[More Information]</a>
Hatcher, P., Khalilpour, R., Abbas, A. (2012).
Optimisation of LNG mixed-refrigerant
processes
considering operation and design objectives.
Computers and Chemical Engineering, 41,
123-133. <a
href="http://dx.doi.org/10.1016/j.compchemeng.
2012.03.005">[More Information]</a>
Khalilpour, R., Abbas, A. (2012). Reply. AIChE
Journal, 58(12), 3929-3929. <a
href="http://dx.doi.org/10.1002/aic.13915">[Mor
e Information]</a>
Syed Muhammad, S., Oubani, H., Abbas, A.,
Chan, K., Kwok, P., Dehghani, F. (2013). The
production of dry powder by the
sonocrystallisation for inhalation drug delivery.
Powder Technology, 246, 337-344. <a
href="http://dx.doi.org/10.1016/j.powtec.2013.05
.019">[More Information]</a>
Mokhtar, M., Ali, M., Khalilpour, R., Abbas, A.,
Shah, N., Hajaj, A., Armstrong, P., Chiesa, M.,
Sgouridis, S. (2012). Solar-assisted
post-combustion carbon capture feasibility
study. Applied Energy, 92, 668-676. <a
href="http://dx.doi.org/10.1016/j.apenergy.2011.
07.032">[More Information]</a>
2012
2011
Widenski, D., Abbas, A., Romagnoli, J. (2012).
A modeling approach for the non-isothermal
Milani, D., Abbas, A., Mokhtar, M., Chiesa, M.
(2011). A computational model to evaluate solar
offset and water generation from atmospheric
moisture using location-specific annual climate
data. 2011 AIChE Annual Meeting, Minneapolis:
OmniPress.
antisolvent crystallization of a solute with weak
temperature dependent solubility. Crystal
Research and Technology: journal of
experimental and industrial crystallography,
47(5), 491-504. <a
href="http://dx.doi.org/10.1002/crat.201100441"
>[More Information]</a>
Li, Z., Khalilpour, R., Abbas, A. (2012).
Efficient configuration/design of solvent-based
post-combustion carbon capture. Computer
Aided Chemical Engineering, 31, 815-819. <a
href="http://dx.doi.org/10.1016/B978-0-444-595
07-2.50155-4">[More Information]</a>
Abbas, A., Qadir, A., Khalilpour, R., Chiesa, M.
(2012). Integration of solar energy with
post-combustion carbon capture. Qatar Science
Widenski, D., Abbas, A., Romagnoli, J. (2011).
A Model-Based Nucleation Study of the
Combined Effect of Seed Properties and Cooling
Rate in Cooling Crystallization. Computers and
Chemical Engineering, 35(12), 2696-2705. <a
href="http://dx.doi.org/10.1016/j.compchemeng.
2010.11.002">[More Information]</a>
Bou Karam, N., Mineyama, H., Valix, M.,
Abbas, A. (2011). Carbon dioxide sequestration
by carbonation of mine tailings. Chemeca 2011:
Engineering a Better World, Sydney: Engineers
Australia.
Publications for Ali Abbas
Abbas, A., Khalilpour, R. (2011). Efficiency
Improvement Opportunities. Sydney Symposium
on Carbon Capture, publisher: publisher.
Engineering. Volume 7: Dynamic Process
Modeling, (pp. 239-285). Germany: Wiley - V C
H Verlag GmbH & Co. KGaA.
Milani, D., Abbas, A., Vassallo, A., Chiesa, M.,
Al Bakri, D. (2011). Evaluation of using
thermoelectric coolers in a dehumidification
system to generate freshwater from ambient air.
Chemical Engineering Science, 66(12),
2491-2501. <a
href="http://dx.doi.org/10.1016/j.ces.2011.02.01
8">[More Information]</a>
Zhang, B., Abbas, A., Romagnoli, J. (2011).
Multi-Resolution Fuzzy Clustering Approach for
Image-Based Particle Characterization for
Particle Systems. Chemometrics and Intelligent
Laboratory Systems, 107(1), 155-164. <a
href="http://dx.doi.org/10.1016/j.chemolab.2011.
03.001">[More Information]</a>
Khalilpour, R., Abbas, A. (2011). HEN
Optimization for efficient retrofitting of
coal-fired power plants with post-combustion
carbon capture. International Journal of
Greenhouse Gas Control, 5(2), 189-199. <a
href="http://dx.doi.org/10.1016/j.ijggc.2010.10.0
06">[More Information]</a>
Gregory, B., Gregory, S., Wood, D., Masters, Y.,
Hillier, M., Stokes-Thompson, F., Bogdanovych,
A., Butler, D., Hay, L., Jegathesan, J., Abbas, A.,
Jacobson, M., Newstead, A., et al (2011). How
are Australian higher education institutions
contributing to change through innovative
teaching and learning in virtual worlds? Ascilite
2011: Changing Demands, Changing Directions,
Hobart, Australia: University of Tasmania.
Pavanasam, A., Abbas, A., Chen, V. (2011).
Influence of particle size and operating
parameters on virus ultrafiltration efficiency.
Water Science and Technology: Water Supply,
11(1), 31-38. <a
href="http://dx.doi.org/10.2166/ws.2011.005">[
More Information]</a>
Khalilpour, R., Abbas, A. (2011). Integrated
design and dynamic operation of solvent-based
PCC processes. 2011 AIChE Annual Meeting,
Minneapolis: OmniPress.
Oubani, H., Abbas, A., Harris, A. (2011).
Investigating the Mechanical Pretreatment of
Cellulose by High Intensity Ultrsound and Ball
Milling. Chemeca 2011: Engineering a Better
World, Sydney: Engineers Australia.
Khalilpour, R., Abbas, A. (2011). Is selectivity
the main parameter in membrane fabrication and
design for post-combustion carbon capture?
International Congress on Membranes and
Membrane Processes (ICOM 2011), publisher:
publisher.
Khalilpour, R., Abbas, A. (2011). Membrane
carbon capture and the critical role of Process
System Engineering. 2011 AIChE Annual
Meeting, Minneapolis: OmniPress.
Abbas, A., Romagnoli, J., Widenski, D. (2011).
Modelling of Crystallization Processes. In
Michael Georgiadis, Julio Banga and Efstratios
Pistikopoulos (Eds.), Process Systems
Raman, V., Abbas, A., Zhu, W. (2011). Particle
Grinding by High-Intensity Ultrasound: Kinetic
Modeling and Identification of Breakage
Mechanisms. AIChE Journal, 57(8), 2025-2035.
<a
href="http://dx.doi.org/10.1002/aic.12415">[Mor
e Information]</a>
Gopal Sahoo, N., Kakran, M., Abbas, A., Judeh,
Z., La, L. (2011). Preparation, Characterization
and Dissolution Behavior of Artemisinin
Microparticles. Advanced Powder Technology,
22(4), 458-463. <a
href="http://dx.doi.org/10.1016/j.apt.2011.03.01
0">[More Information]</a>
Khalilpour, R., Li, Z., Abbas, A. (2011).
Retrofitting Carbon Capture Process to
Coal-fired Power Plants: Dynamic Operation and
response to market demands. Chemeca 2011:
Engineering a Better World, Sydney: Engineers
Australia.
Alaeddini, R., Ahmadhi, M., walsh, S., Abbas,
A. (2011). Semi-quantitative PCR Analysis of
DNA Degradation. Australian Journal of
Forensic Sciences, 43(1), 53-64. <a
href="http://dx.doi.org/10.1080/00450618.2010.
498026">[More Information]</a>
Khalilpour, R., Abbas, A. (2011). Simulation and
Optimization of a Coal-fired Power Plant with a
Solvent-based Post-combustion Carbon Capture
Process. Honeywell Users Group Pacific 2011,
publisher: publisher.
Khalilpour, R., Abbas, A. (2011). United Nations
COPs on climate change have had limited
success? 12th Association of Pacific Rim
Universities Doctoral Students Conference
(APRU DSC), China: Press of Tsinghua
University.
Widenski, D., Abbas, A., Romagnoli, J. (2011).
Use of Predictive Solubility Models for
Isothermal Antisolvent Crystallization Modeling
and Optimization. Industrial and Engineering
Chemistry Research, 50(13), 8304-8313.
Widenski, D., Abbas, A., Romagnoli, J. (2011).
Use of Predictive Solubility Models for
Isothermal Antisolvent Crystallization Modeling
and Optimization. Industrial and Engineering
Chemistry Research, 50(13), 8304-8313. <a
Publications for Ali Abbas
href="http://dx.doi.org/10.1021/ie102393y">[Mo
re Information]</a>
Meeting 2010, Salt Lake City, UT: American
Institute of Chemical Engineers.
2010
Raman, V., Abbas, A., Zhu, W. (2010). Particle
Grinding by High Intensity Ultrasound: Kinetic
Modeling and Identification of Breakage
Mechanisms. AIChE Journal, , 1-11.
Widenski, D., Abbas, A., Romagnoli, J. (2010).
Comparison of different solubility equations for
modeling in cooling crystallization. Chemical
Engineering and Processing, 49(12), 1284-1297.
<a
href="http://dx.doi.org/10.1016/j.cep.2010.09.01
8">[More Information]</a>
Oubani, H., Abbas, A., Srour, M., Romagnoli, J.
(2010). Effects of operating conditions on
particle size in sonocrystallization. Asia-Pacific
Journal of Chemical Engineering, 5(4), 599-608.
<a
href="http://dx.doi.org/10.1002/apj.437">[More
Information]</a>
Alaeddini, R., Walsh, S., Abbas, A. (2010).
Forensic Implications of Genetic Analyses from
Degraded DNA - A Review. Forensic Science
International: Genetics, 4(3), 148-157. <a
href="http://dx.doi.org/10.1016/j.fsigen.2009.09.
007">[More Information]</a>
Abbas, A., Ansumali, S. (2010). Global Potential
of Rice Husk as a Sustainable Feedstock for
Ethanol Biofuel Production. BioEnergy
Research, 3(4), 328-334. <a
href="http://dx.doi.org/10.1007/s12155-010-908
8-0">[More Information]</a>
Abbas, A. (2010). Learning Dynamics and
Control in a Virtual World. IEEE Engineering
Education 2010 - The Future of Global Learning
in Engineering Education.
Alaeddini, R., Walsh, S., Abbas, A. (2010).
Molecular Studies of Time- and
Environment-Dependent Effects on Bone DNA
Survival. Australian Journal of Forensic
Sciences, 42(3), 211-220. <a
href="http://dx.doi.org/10.1080/0045061100375
8264">[More Information]</a>
Abbas, A. (2010). Multi-Resolution Fuzzy
Clustering Approach for Image-Based Particle
Characterization. 2010 IFAC International
Symposium on Dynamics and Control of Process
Systems.
Abbas, A. (2010). Optimal Analysis of Solvent
and Membrane based PCC for Power Plants.
AICHE 2008 Annual Meeting. OmniPress.
Abbas, A. (2010). Optimal Synthesis and Design
of Three-Phase Separator for Upstream Oil and
Gas Processes. AICHE 2008 Annual Meeting.
OmniPress.
Khalilpour, R., Abbas, A. (2010). Optimal
Synthesis and Design of Three-Phase Separator
for Upstream Oil and Gas Processes. American
Institute of Chemical Engineers (AIChE) Annual
Abbas, A. (2010). Particle Size in Membrane
Filtration: Novel Strategy for Better Insights.
Membrance Society of Australasia Symposium.
Abbas, A. (2010). Pinch Analysis for Integration
of Coal-Fired Power Plants with Carbon Capture.
ESCAPE-20.
Leng, W., Abbas, A., Khalilpour, R. (2010).
Pinch Analysis for Integration of Coal-Fired
Power Plants with Carbon Capture. ESCAPE-20.
Gopal Sahoo, N., Kakran, M., Abbas, A., Judeh,
Z., Li, L. (2010). Preparation of Artemisinin
Microparticles with Enhanced Dissolution Using
a Modified 4-Fluid Nozzle Pilot Spray Drier.
Chemeca 2010, Canberra: RMIT Publishing.
Milani, D., Abbas, A., Al Bakri, D. (2010).
Sustainable Solutions to Our Water Crisis:
Generating Freshwater from "Thin Air". In
Xiaodi Hao, Vladimir Novotny and Valerie
Nelson (Eds.), Water Infrastructure for
Sustainable Communities: China and the World,
(pp. 127-139). London: IWA Publishing.
2009
Widenski, D., Abbas, A., Romagnoli, J. (2009).
A theoretical nucleation study of the combined
effect of seeding and temperature profile in
cooling crystallization. 10th International
Symposium on Process Systems
Engineering-PSE2009, Amsterdam: Elsevier.
Widenski, D., Abbas, A., Romagnoli, J. (2009).
Effect of the solubility model on antisolvent
crystallization predicted volume mean size. The
Ninth International Conference on Chemical and
Process Engineering, Italy: The Italian
Association of Chemical Engineering.
Widenski, D., Abbas, A., Romagnoli, J. (2009).
Evaluation of the effect of the solubility model
on antisolvent crystallization optimization.
International Symposium on Avanced Control of
Chemical Processes (ADCHEM 2009), Oxford,
United Kingdom: Elsevier.
Abbas, A. (2009). Influence of Particle Size on
Virus Ultrafiltration Efficiency. IWA-MTC 2009,
publisher: publisher.
Oubani, H., Abbas, A. (2009). Investigations on
sonocrystallization. CHEMECA 2009, Perth:
Engineers Australia.
Abbas, A. (2009). Modeling particle size in
ultrafiltration. EuroMembrane 2009, publisher:
publisher.
Publications for Ali Abbas
Abbas, A., Alhammadi, H., Romagnoli, J.
(2009). Process Systems Engineering education:
learning by research. Chemical Engineering
Education, 43(1), 58-64.
analysis of DNA degradation patterns in
biological material. Chemeca 2008: Towards a
Sustainable Australasia, Barton, ACT: Engineers
Australia.
Gopal Sahoo, N., Abbas, A., Judeh, Z., Li, C.,
Yuen, K. (2009). Solubility Enhancement of a
Poorly Water-Soluble
Abbas, A., Gopal Sahoo, N., Li, C. (2008).
Micro/Nanoparticle design and fabrication for
pharmaceutical drug preparation and delivery
applications. Current Drug Therapy, 3, 78-97. <a
href="http://dx.doi.org/10.2174/1574885087842
21253">[More Information]</a>
Anti-Malarial Drug: Experimental Design and
Use of a
Modified Multifluid Nozzle Pilot Spray Drier.
Journal of Pharmaceutical Sciences, 98(1),
281-296. <a
href="http://dx.doi.org/10.1002/jps.21399">[Mor
e Information]</a>
Abbas, A., Faua'ad Syed Muhammad, S.,
Oubani, H., Romagnoli, J., Dehghani, F. (2009).
Spinning Disk Reactor for the Fabrication of
Nanoparticles. CHEMECA 2009, Perth:
Engineers Australia.
Abbas, A. (2009). Sustainable solutions to our
water crisis: Generating freshwater from 'thin
air'. SWIF2009, Beijing: publisher.
2008
Korath, J., Abbas, A., Romagnoli, J. (2008). A
clustering approach for the separation of
touching edges in particle images. Particle and
Particle Systems Characterization, 25(2),
142-153. <a
href="http://dx.doi.org/10.1002/ppsc.200701107
">[More Information]</a>
Abbas, A., Pavanasam, A., Ansumali, S., Chen,
V. (2008). A population balance model for virus
ultrafiltration processes. Engineering With
Membranes 2008, Honululu: publisher.
Nowee Baghban, S., Abbas, A., Romagnoli, J.
(2008). Antisolvent crystallization: Model
identification, experimental validation and
dynamic simulation. Chemical Engineering
Science, 63(22), 5457-5467. <a
href="http://dx.doi.org/10.1016/j.ces.2008.08.00
3">[More Information]</a>
Marshall, G., Abbas, A. (2008). Bioethanol from
lignocelluloisic wastes in Australia. Chemeca
2008: Towards a Sustainable Australasia,
Barton, ACT: Engineers Australia.
Widenski, D., Abbas, A., Romagnoli, J. (2008).
Comparison of the use of different solubility
models for the cooling crystallization of
Acetaminophen. AICHE 2008 Annual Meeting.
OmniPress.
Nowee Baghban, S., Abbas, A., Romagnoli, J.
(2008). Model-Based Optimal Strategies for
controlling Particle Size in Antisolvent
Crystallization Operations. Crystal Growth and
Design, 8(8), 2698-2706. <a
href="http://dx.doi.org/10.1021/cg700720t">[Mo
re Information]</a>
Abbas, A. (2008). of infrared spectroscopic
analysis in forensic bone samples. ANZFSS,
publisher: publisher.
Zamri, D., Koutouridis, P., Johnson, P., Abbas,
A., Kavanagh, J. (2008). Supporting experiential
learning: an integrated website for chemical
engineering laboratories. Chemeca 2008:
Towards a Sustainable Australasia, Barton,
ACT: Engineers Australia.
Abbas, A., Pavanasam, A. (2008). Ultrafiltration
and virus removal: A review of recent patents.
Recent Patents on Chemical Engineering, 1,
151-156.
2007
Abbas, A., Romagnoli, J. (2007). Curriculum
Intensification Through Integration of Units of
Study in the Chemical Engineering Degree
Programme. Education for Chemical Engineers,
2(1), 46-55. <a
href="http://dx.doi.org/10.1205/ece06030">[Mor
e Information]</a>
Raman, V., Abbas, A. (2007). Experimental
investigations on ultrasound mediated particle
breakage. Ultrasonics Sonochemistry, 15(1),
55-64. <a
href="http://dx.doi.org/10.1016/j.ultsonch.2006.1
1.009">[More Information]</a>
Abbas, A. (2007). Hydrodynamics beyond
Navier-Stokes: Exact Solution to the Lattice
Boltzmann Hierarchy. Physical Review Letters,
98(12), 1-4. <a
href="http://dx.doi.org/10.1103/PhysRevLett.98.
124502">[More Information]</a>
Abbas, A. (2008). Complications of PCR based
genotyping in forensic context. ANZFSS,
publisher: publisher.
Abbas, A., Romagnoli, J. (2007). Multiscale
modeling, simulation and validation of batch
cooling crystallization. Separation and
Purification Technology, 53(2), 153-163.
Alaeddini, R., walsh, S., Abbas, A. (2008).
Development of quantitative methods for
Abbas, A., Nowee Baghban, S., Romagnoli, J.
(2007). Optimal Control of Particle Size in
Publications for Ali Abbas
Antisolvent Crystallization Operations. The
Eigth International Conference on Chemical and
Process Engineering, Italy: The Italian
Association of Chemical Engineering.
Abbas, A., Korath, J., Romagnoli, J. (2007).
Separating touching and overlapping objects in
particle images - A combined approach,
Chemical Engineering Transactions. The Eighth
International Conference on Chemical and
Process Engineering, Italy: The Italian
Association of Chemical Engineering.
Abbas, A., Srour, M., Tang, P., Chiou, H., Chan,
K., Romagnoli, J. (2007). Sonocrystallization of
sodium chloride particles for inhalation.
Chemical Engineering Science, 62(9),
2445-2453. <a
href="http://dx.doi.org/10.1016/j.ces.2007.01.05
2">[More Information]</a>
2006
Abbas, A., Romagnoli, J. (2006). DCS
implementation of optimal operational policies: a
crystallisation case study. International Journal
of Computer Applications in Technology, 25(4),
198-208.
2005
Abbas, A., Orellana, J., Rolandi, P., Romagnoli,
J. (2005). Experiential engineering e-learning:
The concept of Soft Reaction. World
Transactions on Engineering and Technology
Education, 4(2), 171-176.
2003
Abbas, A., Romagnoli, J. (2003). A Modelling
Environment for the Advances Operation of
Crystallisation Processes. In Bingzhen Chen,
Arthur W. Westerberg (Eds.), Process Systems
Engineering 2003, (pp. 1250-1255). Amsterdam,
The Netherlands: Elsevier.
Abbas, A., Zeaiter, J., Romagnoli, J. (2003). An
integrated framework for the advanced control
and operation of industrial particulate processes.
ICheaP-6: 6th Italian Conference on Chemical
and Process Engineering, Italy: Aidic.
2002
Abbas, A., Romagnoli, J. (2002). Inferential state
measurement of crystallisation processes.
WCPT4, Sydney, Australia: WCPT4 Inc.
Abbas, A., Nobbs, D., Romagnoli, J. (2002).
Investigation of on-line optical particle
characterization in reaction and cooling
crystallization systems. Current state of the art.
Measurement Science and Technology, 13(3),
349-356.
2001
Romagnoli, J., Abbas, A., Nobbs, D. (2001).
Towards Reliable on-line particle
characterisation in reaction and cooling
crystallisation systems. 6th World Congress of
Chemical Engineering. UNSW Australian
Defence Force Academy.