LIST OF ATTEMPTED QUESTIONS AND ANSWERS
Select The Blank
Question Production Planning is a centralised activity which includes functions such as ________
Correct Answer Scheduling
Your Answer Scheduling
Multiple Choice Single Answer
Question In case of Batch Production which kind of labour is expected?
Correct Answer Skilled in one specific Manufacturing Process
Your Answer Skilled in one specific Manufacturing Process
Select The Blank
Question A good maintenance system is not a luxary but a ________.
Correct Answer Necessity
Your Answer Necessity
Multiple Choice Single Answer
Question A good layout makes effective use of space. Utilization of space for a department like Stores
can be measured by
Correct Answer Proportion of Cubic volume space utilized
Your Answer No such measure in use
True/False
Question One major difference between CPM and PERT is the former's adaptability for the projects
where high degree of uncertainty prevails and activity times during performance are expected to vary
considerably for certain activities.
Correct Answer False
Your Answer False
Multiple Choice Multiple Answer
Question In an organization there may not be a formal PPC department if
Correct Answer Work is highly repetitive in nature , Planning activities are performed by the line staff ,
Number of workmen is not very large
Your Answer Work is highly repetitive in nature , Planning activities are performed by the line staff ,
Number of workmen is not very large
Multiple Choice Single Answer
Question Which industry out of the following industries require maximum consideration for safety factor
while selecting plant location?
Correct Answer Nuclear power plant
Your Answer Nuclear power plant
Select The Blank
Question The easiest way to bring the delayed job within the promised delivery time by using extra shift
or weekly holiday is ________.
Correct Answer Overtime working
Your Answer Overtime working
Select The Blank
Question OC curve of ideal sampling plan suggests that all lots less than 3% defectives have the
probability of acceptance of ________.
Correct Answer One
Your Answer One
Multiple Choice Multiple Answer
Question Following are some of the Principles of Management advocated by F W Taylor
Correct Answer Selection of best worker for each particular task , Division of work between worker and
management , Training and development of the workmen
Your Answer Selection of best worker for each particular task , Division of work between worker and
management , Training and development of the workmen
Multiple Choice Single Answer
Question Out of two basic criteria for the selection of a manufacturing method, one is, it must be able to
meet the specifications of final product and the other is, it must be
Correct Answer Cost effective method
Your Answer Cost effective method
Multiple Choice Single Answer
Question What does CPA stand for?
Correct Answer Critical Path Analysis
Your Answer Critical Path Analysis
Multiple Choice Multiple Answer
Question What is the basic minimum requirement for those who are responsible for the quality of
design?
Correct Answer In depth knowledge about alternative materials and manufacturing processes , access to
latest technology and production process adopted by industries in the developed market , Continuous effort
in product development
Your Answer In depth knowledge about alternative materials and manufacturing processes , access to
latest technology and production process adopted by industries in the developed market , Continuous effort
in product development
True/False
Question A lot declared rejected in sampling inspection should not be inspected 100% in any case.
Correct Answer False
Your Answer False
True/False
Question A network should employ only those dummy activities which are absolutely necessary.
Correct Answer True
Your Answer True
Multiple Choice Multiple Answer
Question Which of the following are scheduling techniques?
Correct Answer Critical Path Analysis , Index Method , Johnson's two machine algorithm
Your Answer Critical Path Analysis , Index Method , Johnson's two machine algorithm
True/False
Question The component produced on completely automatic machines may be subjected to sampling
inspection while parts produced on semi-automatic and completely manual operated machines require cent
percent inspection.
Correct Answer True
Your Answer True
Multiple Choice Single Answer
Question The ratio of output to input of a production system is commonly known as
Correct Answer Productivity
Your Answer Productivity
Multiple Choice Single Answer
Question Which of the following policies is advisable in case of low product variety and large volumes?
Correct Answer Low Skilled Labour & Special Purpose Machines
Your Answer Low Skilled Labour & Special Purpose Machines
Multiple Choice Single Answer
Question Any premise in which persons are employed for purpose of making any product/s is called
Correct Answer Factory
Your Answer Factory
Multiple Choice Multiple Answer
Question Plant layout facilitates processing of products in most effective manner through the following
Correct Answer Shortest possible distance , Shortest processing time , Minimum movement
Your Answer Shortest possible distance , Shortest processing time
Multiple Choice Single Answer
Question Site factors for plant location include
Correct Answer Suitability of land
Your Answer Suitability of land
Multiple Choice Single Answer
Question A good plant layout helps in
Correct Answer Reducing handling costs
Your Answer Reducing handling costs
Match The Following
Question Correct Answer Your Answer
Combined Layout Mixed Layout Mixed Layout
Fixed Position Layout Project Layout Project Layout
Product Layout Line Layout Line Layout
Process Layout Functional Layout Functional Layout
Multiple Choice Single Answer
Question Which kind of inspection is followed in case of process layout?
Correct Answer First off inspection
Your Answer First off inspection
True/False
Question Even if any activity on the critical path is delayed, project completes on the scheduled time.
Correct Answer False
Your Answer False
Multiple Choice Single Answer
Question Inadequate production capacity ultimately leads to
Correct Answer Poor Customer Service
Your Answer Poor Customer Service
Select The Blank
Question The ________ is the probability that a bad lot will be accepted by the sampling plan.
Correct Answer Consumer's risk
Your Answer Consumer's risk
Multiple Choice Multiple Answer
Question Which are the different methods of recording actual progress of work?
Correct Answer Display boards , Progress cards , Network updating
Your Answer Display boards , Progress cards , Network updating
Select The Blank
Question Production control work is ________ in case of floor inspection as compared with the
centralised inspection.
Correct Answer easier
Your Answer easier
Multiple Choice Single Answer
Question Product layout offer following advantages
Correct Answer There is economy in manufacturing time
Your Answer There is economy in manufacturing time
True/False
Question Flow process charts do record movements as well as visual pictures.
Correct Answer False
Your Answer False
Multiple Choice Single Answer
Question Main objective of a good plant layout is
Correct Answer Reduce material handling cost
Your Answer Reduce material handling cost
Select The Blank
Question In case of an OC curve, the risk of rejecting a good quality lot may vary between ________.
Correct Answer 0.01 to 10%
Your Answer 0.01 to 10%
Multiple Choice Multiple Answer
Question Features of Cellular layout are
Correct Answer It is a type of mixed layout , Uses concept of Group Technology , Facilities are grouped
in to cells
Your Answer It is a type of mixed layout , Uses concept of Group Technology , Facilities are grouped in
to cells
True/False
Question Cent percent inspection is required on WIP prior to the key, critical or costly operation.
Correct Answer True
Your Answer True
Select The Blank
Question The ________ is the defect level for which lots are regarded as bad lots.
Correct Answer Lot Tolerance Percentage Defective
Your Answer Lot Tolerance Percentage Defective
Multiple Choice Multiple Answer
Question What are the benefits of reconditioning?
Correct Answer Eliminates problems and frequent breakdowns , Increases life of an equipment , It helps
to plan requirement of replacement spares
Your Answer Eliminates problems and frequent breakdowns , Increases life of an equipment , It helps to
plan requirement of replacement spares
Multiple Choice Single Answer
Question What does head of an arrow represent?
Correct Answer End of an activity
Your Answer End of an activity
Multiple Choice Single Answer
Question What do you mean by planned corrective manitenance which provides an opportunity to
undertake design modifications in the equipment to eliminate or reduce frequency of breakdowns.
Correct Answer Design-out Maintenance
Your Answer Design-out Maintenance
Select The Blank
Question The ________ is the maintenance work initiated on a result of knowledge of the condition of an
item from routine or continuous checking.
Correct Answer Condition monitoring
Your Answer Condition monitoring
Multiple Choice Single Answer
Question The process of changing inputs into outputs thereby adding some value to entity can be defined
as
Correct Answer Operation
Your Answer Operation
Multiple Choice Multiple Answer
Question Which of the following are characteristics of an operating characteristics curve?
Correct Answer Producer risk , Consumer Risk , Acceptable Quality Level
Your Answer Producer risk , Consumer Risk , Acceptable Quality Level
Match The Following
Question Correct Answer Your Answer
Toung Sweet Sweet
Eye Crack Crack
Nose Burnout Burnout
Ear Impact Impact
Select The Blank
Question The ________ is a set of tools and techniques by which products are made to comply with the
specifications at minimum cost to the firm.
Correct Answer Quality control system
Your Answer Quality control system
Multiple Choice Multiple Answer
Question Which three of the following options can be used to reduce the duration of activity during
project crashing?
Correct Answer Allocating more manpower and machines than originally planned for. , Working
additional shifts or overtime. , Awarding work to vendors who charge extra but expedite deliveries.
Your Answer Allocating more manpower and machines than originally planned for. , Working additional
shifts or overtime. , Awarding work to vendors who charge extra but expedite deliveries.
Select The Blank
Question Goods after final inspection should accompany ________to enable dispatch department to
identify and draw correct reference.
Correct Answer Forwarding note
Your Answer Forwarding note