POM assgn : Grace
True/False
Question
Floor inspection delays the identification of faults which can not be rectified immediately
before large lots are spoiled.
Correct Answer False
Your Answer
False
Multiple Choice Single Answer
Question
Management often fails to realize the importance of efficient layout due to following
reason
Correct Answer losses resulting from poor layout are not directly shown in the financial statements
Your Answer
losses resulting from poor layout are not directly shown in the financial statements
Select The Blank
Question
The ________ is the defect level for which lots are regarded as bad lots.
Correct Answer Lot Tolerance Percentage Defective
Your Answer
Lot Tolerance Percentage Defective
Multiple Choice Single Answer
Question
Which method of critical path determination begins with the end event and moves
backward to the start event of the project network?
Correct Answer Backward pass computation
Your Answer
True/False
Question
Backward pass computation
Complexity and difficulty of Planning is influenced by types of layout
Correct Answer True
Your Answer
False
True/False
Question
For p-chart, p bar is the ratio of total number of units inspected to the total number of
units defectives.
Correct Answer False
Your Answer
True
Multiple Choice Single Answer
Question
What is represented by an arrow in a network?
Correct Answer Activity
Your Answer
Activity
Multiple Choice Multiple Answer
Question
MRP utilises the following information
Correct Answer Master production schedule , Product structure , Lead time for
procurement/manufacturing
Your Answer
Master production schedule , Lead time for procurement/manufacturing , list of
machines
Multiple Choice Single Answer
Question
Which is the ideal place to write a description of an activity in a network?
Correct Answer Above the arrow
Your Answer
Above the arrow
Select The Blank
Question
The ________ breakdowns usually cost more, partly due to damage done to the
adjustment components and partly due to emergency actions.
Correct Answer Unexpected
Your Answer
Unexpected
Multiple Choice Single Answer
Question
Any premise in which persons are employed for purpose of making any product/s is
called
Correct Answer Factory
Your Answer
Factory
True/False
Question
Systematic maintenance system can completely eliminate the wear and tear of
machines.
Correct Answer False
Your Answer
True
Multiple Choice Multiple Answer
Question
Which of the following are types of non-destructive testing?
Correct Answer Visual Testing , Eddy current , Magnetic flow detectors
Your Answer
Visual Testing , Eddy current , Magnetic flow detectors
Select The Blank
Question
Work study is also called ________ study
Correct Answer Time and Motion
Your Answer
Time and Motion
Multiple Choice Single Answer
Question
Providing flexibility in plant layout means
Correct Answer Layout can be changed without much cost if required
Your Answer
Layout can be changed without much cost if required
Multiple Choice Multiple Answer
Question
Which of the following aspects are essential to ensure quality of purchased items?
Correct Answer Defining right quality for the job , Vendor performance evaluation , Making sure that
suppliers understand the requirements
Your Answer
Defining right quality for the job , Vendor performance evaluation , Making sure that
suppliers understand the requirements
Multiple Choice Multiple Answer
Question
Which of the following are scheduling techniques?
Correct Answer Critical Path Analysis , Index Method , Johnson's two machine algorithm
Your Answer
Critical Path Analysis , Index Method , Johnson's two machine algorithm
Select The Blank
Question
The ________ advocates maintenance procedures whereby the condition of the plant is
constantly watched through systematic inspection to unearth unhealthy conditions and
preventive
Correct Answer Preventive Maintenance
Your Answer
True/False
Question
Preventive Maintenance
A network should be progression of activities always moving forward.
Correct Answer True
Your Answer
True
Multiple Choice Multiple Answer
Question
In an organization there may not be a formal PPC department if
Correct Answer Work is highly repetitive in nature , Planning activities are performed by the line staff ,
Number of workmen is not very large
Your Answer
Work is highly repetitive in nature , Planning activities are performed by the line staff ,
Number of workmen is not very large
Select The Blank
Question
The ________ is necessary when the job requires detailed of one or more of the job
characteristics with the help of special equipment which is not available at the producing
company.
Correct Answer Inspection order
Your Answer
Inspection order
Multiple Choice Multiple Answer
Question
Order preparation process for products manufatured to order requires following
documents
Correct Answer Sales Order , Work order , Shop order
Your Answer
Sales Order , Work order , Shop order
Multiple Choice Single Answer
Question
What do you understand by the selection of the job for the method study on the basis of
money saving potential of the job?
Correct Answer Economic consideration
Your Answer
Economic consideration
Select The Blank
Question
Production Planning is a centralised activity which includes functions such as ________
Correct Answer Scheduling
Your Answer
Scheduling
Multiple Choice Multiple Answer
Question
Scale model used for layout analysis have following advantages
Correct Answer Nontechnical person finds it easy to comprehend , Ovehead facilities can be shown ,
Models can be shifted easily
Your Answer
Nontechnical person finds it easy to comprehend , Ovehead facilities can be shown ,
Models can be shifted easily
Multiple Choice Single Answer
Question
Which is the ideal place to inspect jigs and fixtures in a mass manufacturing unit?
Correct Answer Separate inspection room
Your Answer
Separate inspection room
Multiple Choice Single Answer
Question
How to reveal the capability of the sampling plan to discriminate between good lots and
bad lots?
Correct Answer Operating characteristics curve ( OC )
Your Answer
Operating characteristics curve ( OC )
True/False
Question
It would not affect the project completion time if non-critical activities take little loner
time than planned.
Correct Answer True
Your Answer
True
Select The Blank
Question
The ________ includes preventive maintenance activities whose needs are identified
through inspection which requires stoppage of machines.
Correct Answer Shutdown Maintenance
Your Answer
Shutdown Maintenance
Match The Following
Question
Correct Answer
Your Answer
Forcasting requirement for
indirect material
Past consumption analysis
technique
Past consumption analysis
technique
Inventory control by classification ABC Analysis
ABC Analysis
Structure of the product
BOM
BOM
Material Planning for dependent
demand
MRP
MRP
True/False
Question
The dispatching function is of very importance in flow and mass production units.
Correct Answer False
Your Answer
True
Multiple Choice Multiple Answer
Question
Which features should be covered by the specifications of materials while defining the
qualitative requirement?
Correct Answer Material composition , Dimensions , Any heat treatment if required
Your Answer
Material composition , Dimensions , Cost of material
Select The Blank
Question
The ________ is the maintenance work initiated on a result of knowledge of the
condition of an item from routine or continuous checking.
Correct Answer Condition monitoring
Your Answer
Condition monitoring
Select The Blank
Question
One detachable ticket is prepared for each ________.
Correct Answer Operation
Your Answer
Operation
Multiple Choice Single Answer
Question
Which of the following is the most popular technique for Project Production?
Correct Answer PERT & CPM
Your Answer
PERT & CPM
Select The Blank
Question
A good maintenance system is not a luxary but a ________.
Correct Answer Necessity
Your Answer
Necessity
Multiple Choice Single Answer
Question
The process of changing inputs into outputs thereby adding some value to entity can be
defined as
Correct Answer Operation
Your Answer
Operation
True/False
Question
An activity should represent an operation or set of operations which can be performed
using a particular kind of equipment or a special skill.
Correct Answer True
Your Answer
False
Multiple Choice Multiple Answer
Question
Which of the following are types of sampling plan?
Correct Answer Single sampling plan , Double sampling plan , Multiple sampling plan
Your Answer
Single sampling plan , Double sampling plan , Multiple sampling plan
True/False
Question
In case of forward pass computation, the earliest event time of a plain event equals the
earliest event time of the preceding event plus duration of activity emanating from the
preceding event.
Correct Answer True
Your Answer
False
Multiple Choice Multiple Answer
Question
Which of the following are ideal situations for the preventive inspection?
Correct Answer Weekly off and holidays , Non-production hours , Stand-up equipment
Your Answer
Weekly off and holidays , Non-production hours , Stand-up equipment
Multiple Choice Single Answer
Question
What do you mean by the chart on which the major activities and entry points of
materials are recorded to have graphic view of operations and inspections involved in
the process?
Correct Answer Operation process chart
Your Answer
Flow Process chart
Match The Following
Question
Correct Answer
Your Answer
Fixation of inventory level
Reorder level
Reorder level
Symptom of ill planned
purchasing
Over ordering
Over ordering
Factor influencing material
planning
Lead time
Lead time
Net requirement of material under Stock on hand
MRP
Stock on hand
Multiple Choice Single Answer
Question
Taxes / duties levied is one of the important determinant for location decision as
taxes/duties substantially influence
Correct Answer Product cost
Your Answer
Product cost
Multiple Choice Single Answer
Question
Which kind of gauge consists of electrical contacts operating a series of colloured signal
lamps which indicate whether the dimension is correct, oversize or undersize?
Correct Answer Multiple gauging
Your Answer
Multiple gauging
Multiple Choice Multiple Answer
Question
Which of the following are minimum requirement for a good quality of design?
Correct Answer Resonable cost , Resonable procurement time , Resonable manufacturing time
Your Answer
Resonable cost , Resonable procurement time , Resonable manufacturing time
Select The Blank
Question
OC curve of ideal sampling plan suggests that all lots less than 3% defectives have the
probability of acceptance of ________.
Correct Answer One
Your Answer
One