LIST OF ATTEMPTED QUESTIONS AND ANSWERS
Select The Blank
Question
Material flow in process layout is ________.
Correct Answer Discontinuous
Your Answer
Discontinuous
Multiple Choice Multiple Answer
Question
Which details are recorded in columns when each square of
progress card is split up into columns?
Correct Answer Date , Shift , Quantity produced
Your Answer
Shift , Quantity produced , Date
Multiple Choice Multiple Answer
Question
Which of the following cases can be referred as operation in
method study recording?
Correct Answer Change in physical characteristic , Consumption of physical
effort , Change in chemical characteristic
Your Answer
Change in physical characteristic , Consumption of physical
effort , Change in chemical characteristic
Multiple Choice Single Answer
Question
Process type layout is suitable when
Correct Answer there is wide variation in processing time of operations
Your Answer
there is wide variation in processing time of operations
Multiple Choice Multiple Answer
Question
Scale model used for layout analysis have following advantages
Correct Answer Nontechnical person finds it easy to comprehend , Ovehead
facilities can be shown , Models can be shifted easily
Your Answer
Nontechnical person finds it easy to comprehend , Ovehead
facilities can be shown , Models can be shifted easily
True/False
Question
The operator should not stop production if first piece is not
approved by the inspector.
Correct Answer False
Your Answer
False
True/False
Question
Kanban system is essentially a computer based system for
production scheduling and control
Correct Answer False
Your Answer
False
True/False
Question
MRP software generates time periodwise requiremetn of
subassemblies
Correct Answer True
Your Answer
True
Multiple Choice Single Answer
Question
Following is one of the tasks of Production Control
Correct Answer Actual issue of forms and documents
Your Answer
Actual issue of forms and documents
Multiple Choice Single Answer
Question
Which of the following policies is advisable in case of low
product variety and large volumes?
Correct Answer Low Skilled Labour & Special Purpose Machines
Your Answer
Low Skilled Labour & Special Purpose Machines
Multiple Choice Multiple Answer
Question
Which of the following observations are expected from the
preventive maintenance person?
Correct Answer Wrong allignments , Overheating defects , Excessive play
Your Answer
Wrong allignments , Overheating defects , Excessive play
Select The Blank
Question
The ________ is the maintenance work initiated on a result of
knowledge of the condition of an item from routine or continuous
checking.
Correct Answer Condition monitoring
Your Answer
Condition monitoring
Match The Following
Question
Correct Answer
Your Answer
Emerson Efficiency Plan
Wage Payment
Wage Payment
Craft
Facilities Planning
Facilities Planning
Work Sampling
Machine utilization
Machine utilization
Gantt Chart
Production Scheduling
Production Scheduling
Multiple Choice Single Answer
Question
Out of two basic criteria for the selection of a manufacturing
method, one is, it must be able to meet the specifications of final
product and the other is, it must be
Correct Answer Cost effective method
Your Answer
Cost effective method
Multiple Choice Multiple Answer
Question
Which of the following variables which operate periodically are
the reasons for the cyclic pattern depicting peaks and valleys
during Xbar-R control chart?
Correct Answer Wornout positions , Fatigue , Roller eccentricity
Your Answer
Fatigue , Roller eccentricity , Wornout positions
Multiple Choice Multiple Answer
Question
Which are the three distinct parts of the chart?
Correct Answer Summary , Introduction , Body
Your Answer
Summary , Introduction , Body
Multiple Choice Single Answer
Question
Main objective of a good plant layout is
Correct Answer Reduce material handling cost
Your Answer
Reduce material handling cost
Multiple Choice Multiple Answer
Question
Which of the following charts are used for the recording of data
during the method study?
Correct Answer Operation process chart , Multiple activity chart , Flow process
chart
Your Answer
Operation process chart , Multiple activity chart , Flow process
chart
Multiple Choice Multiple Answer
Question
What are the benefits of overhauling?
Correct Answer It increases useful life of an equipment and it's parts , Advance
planning allows to attend equipment without disturbing the
production programme , Advance planning allows to prepare and
keep ready the list of replacement spares
Your Answer
It increases useful life of an equipment and it's parts , Advance
planning allows to attend equipment without disturbing the
production programme , Advance planning allows to prepare and
keep ready the list of replacement spares
True/False
Question
The chances that pessimistic time could even be longer should
be one in hundred or less.
Correct Answer True
Your Answer
True
Multiple Choice Multiple Answer
Question
What are uses of diagrams in method study?
Correct Answer Study different plant layouts and select the most optimum one ,
Study the extent of traffic over the different routes of the plant ,
Identify the extent of backtracking, cross traffic and obstacles
encountered during the movement of material.
Your Answer
Study different plant layouts and select the most optimum one ,
Study the extent of traffic over the different routes of the plant ,
Identify the extent of backtracking, cross traffic and obstacles
encountered during the movement of material.
Select The Blank
Question
A ________ is the systematic recording and critical examination
of existing and proposed ways of doing work, as a means of
developing and applying easier and more effective methods and
reducing costs.
Correct Answer Method study
Your Answer
Method study
True/False
Question
F W Taylor devised a system for classifying motions into basic
divisions called Therbligs
Correct Answer False
Your Answer
False
Select The Blank
Question
The ________ is the probability that a bad lot will be accepted by
the sampling plan.
Correct Answer Consumer's risk
Your Answer
Consumer's risk
True/False
Question
Fixed cost is lower in case of continuous production than
intermittent production.
Correct Answer False
Your Answer
False
Multiple Choice Single Answer
Question
Site factors for plant location include
Correct Answer Suitability of land
Your Answer
Suitability of land
Multiple Choice Single Answer
Question
What do you understand by the selection of the job for the
method study on the basis of money saving potential of the job?
Correct Answer Economic consideration
Your Answer
Economic consideration
Select The Blank
Question
In case of normal distribution curve, the distribution is dependent
on only two parameters, mean and ________.
Correct Answer Standard deviation
Your Answer
Standard deviation
Select The Blank
Question
In case of an OC curve, the risk of rejecting a good quality lot
may vary between ________.
Correct Answer 0.01 to 10%
Your Answer
0.01 to 10%
True/False
Question
Floor inspection promotes tendency of machines to drift out of
limits and produce defectives.
Correct Answer False
Your Answer
False
Multiple Choice Single Answer
Question
In case of Batch Production which kind of labour is expected?
Correct Answer Skilled in one specific Manufacturing Process
Your Answer
Skilled in one specific Manufacturing Process
True/False
Question
Every network does not necessarily have a critical path.
Correct Answer False
Your Answer
False
Multiple Choice Single Answer
Question
How total floats on non-critical activities are shown in the time
chart during project scheduling?
Correct Answer Dotted lines
Your Answer
Dotted lines
Select The Blank
Question
An ________ history card is the record of all repairs,
replacements and engineering changes carried out in the
equipment during it's period of service.
Correct Answer Equipment history card
Your Answer
Equipment history card
True/False
Question
Objective of Work Study is to improve Productivity
Correct Answer True
Your Answer
True
Multiple Choice Single Answer
Question
Production Planning includes
Correct Answer Predetermination of manufacturing requirements
Your Answer
True/False
Question
Predetermination of manufacturing requirements
While numbering as per Fulkerson's rule, arrows emerging from
the initial event are deleted so as to create one or more initial
events.
Correct Answer True
Your Answer
True
Multiple Choice Single Answer
Question
Who has introduced the useful concept of control chart in 1931?
Correct Answer Walter Shewhart
Your Answer
Walter Shewhart
Multiple Choice Multiple Answer
Question
Major contributors in the development of Control Charts,
Sampling plan are
Correct Answer F H Dodge , H G Roming , Walter Schewhart
Your Answer
F H Dodge , H G Roming , Walter Schewhart
True/False
Question
In case of X bar, if the process is not under control indicated by
some points falling outside the control limits, such points outside
the control limits are eliminated and new trial control limits for the
remaining points are computed.
Correct Answer True
Your Answer
True
Multiple Choice Multiple Answer
Question
What are the advantages of templates over diagrams?
Correct Answer Can be conveniently moved on the graph paper , Less laborious
, Saves time
Your Answer
Can be conveniently moved on the graph paper , Less laborious
, Saves time
Multiple Choice Multiple Answer
Question
Which are the different types of flow process charts used for
method study?
Correct Answer Equipment type , Man type , Material type
Your Answer
Equipment type , Man type , Material type
Multiple Choice Multiple Answer
Question
What is indicated by the hugging points lying close to mean of
the process in X bar-R- control chart?
Correct Answer Biases in measurements , Recording done without actual
measurements , Improper selection of samples
Your Answer
Biases in measurements , Recording done without actual
measurements , Improper selection of samples
Select The Blank
Question
The ________ must ensure that the product satisfy the
functional requirements of it's usage.
Correct Answer Quality of design
Your Answer
Quality of conformance
Select The Blank
Question
The ________ refers to the number of samples to be collected to
construct a control chart.
Correct Answer Sample population
Your Answer
Sample population
Match The Following
Question
Correct Answer
Your Answer
Scale model
Layout analysis
Technique for evolving and
analysis of layouts
Factor Analysis
Method to evaluate
layouts
Method to evaluate layouts
Minimization of production Objective of good layout
delays
Objective of good layout
Maximum visibility
Principles of good layout
Principles of good layout
Multiple Choice Single Answer
Question
Product layout is suitable when
Correct Answer Products have reasonable stable demand
Your Answer
Products have reasonable stable demand