POM assgn : Amit
Multiple Choice Multiple Answer
Question
Which of the following are minimum requirement for a good quality of design?
Correct Answer
Resonable cost , Resonable procurement time , Resonable manufacturing time
Your Answer
Resonable manufacturing time , Resonable cost , Resonable procurement time
Multiple Choice Single Answer
Question
Where does the central line is located in case of p-chart?
Correct Answer
at p bar
Your Answer
at median
Multiple Choice Single Answer
Question
Any premise in which persons are employed for purpose of making any product/s
is called
Correct Answer
Factory
Your Answer
Factory
Multiple Choice Single Answer
Question
Technique of Value Engineering can be effectively employed in design of a product
to
Correct Answer
To meet the intended function at lowest cost
Your Answer
Select The Blank
Question
To meet the intended function at lowest cost
Correct Answer
The ________ is the probability that a good lot will be rejected by the sampling
plan.
Producer's risk
Your Answer
Producer's risk
Multiple Choice Multiple Answer
Question
Material Requirement Planning is very useful in following situations
Correct Answer
Your Answer
Select The Blank
Question
Long Lead time for procurement , Several levels of assemblies in product , Long
manufacturing cycle
Long Lead time for procurement , Long manufacturing cycle , Demand for the
product is not known
Correct Answer
The ________ is the watch dog which ensures that every element of production
and activities which could affect the quality of end product are regulated to the
extent desirable.
Quality control
Your Answer
Quality control
Select The Blank
Question
Correct Answer
The ________ is the process of withdrawing the equipment from the production
line, dismantling it unitwise, visualising defects, effecting adjustments, replacing
worn-out parts and finally building it up to get desired accuracies.
Reconditioning
Your Answer
Overhauling
Multiple Choice Single Answer
Question
The ratio of output to input of a production system is commonly known as
Correct Answer
Productivity
Your Answer
Productivity
True/False
Question
Correct Answer
In case of two handed process chart, the simultaneous activities of both hands are
recorded opposite to each other on the chart.
True
Your Answer
True
Match The Following
Question
Correct Answer
Your Answer
Emerson Efficiency Plan
Wage Payment
Wage Payment
Craft
Facilities Planning
Facilities Planning
Work Sampling
Machine utilization
Machine utilization
Gantt Chart
Production Scheduling
Production Scheduling
Multiple Choice Multiple Answer
Question
Which of the following factors play important role while selecting or rejecting a
particular site from legislation and taxation point of view?
Correct Answer
Labour laws , Building codes , Policies regarding issue of licences
Your Answer
Labour laws , Building codes , Policies regarding issue of licences
Multiple Choice Single Answer
Question
What do you mean by the study of repetitive short cycle operations which involve
quick hand / feet motions?
Correct Answer
Micromotion study
Your Answer
True/False
Question
Correct Answer
Macromotion study
An activity should represent an operation or set of operations which can be
performed using a particular kind of equipment or a special skill.
True
Your Answer
True
Multiple Choice Multiple Answer
Question
Which of the following products should be produced by using mass production?
Correct Answer
Refrigerator , Tyre for automobile , Television Set
Your Answer
Refrigerator , Tyre for automobile , Television Set
True/False
Question
Correct Answer
In case of X bar, if the process is not under control indicated by some points falling
outside the control limits, such points outside the control limits are eliminated and
new trial control limits for the remaining points are computed.
True
Your Answer
True
True/False
Question
Correct Answer
After goods have been manufactured, route sheets and operation layouts should
not be collected back.
False
Your Answer
False
True/False
Question
Planned lubrication is said to be the nervous system of the equipment.
Correct Answer
True
Your Answer
True
Multiple Choice Single Answer
Question
What does the points falling outside the control limits indicate?
Correct Answer
Presence of assignable causes
Your Answer
Mean = Standard deviation
Multiple Choice Single Answer
Question
Which industry out of the following industries require maximum consideration for
safety factor while selecting plant location?
Correct Answer
Nuclear power plant
Your Answer
Nuclear power plant
Multiple Choice Multiple Answer
Question
Which of the following are assignable cause?
Correct Answer
Large varaitions in hardness of material , Tool wear , Errors in setting
Your Answer
Large varaitions in hardness of material , Play in guide rods , Errors in setting
Multiple Choice Single Answer
Question
A good plant layout helps in
Correct Answer
Reducing handling costs
Your Answer
Reducing handling costs
Multiple Choice Multiple Answer
Question
Which of the following are examples of addition during recording for method
study?
Correct Answer
Brazing , Welding , Riveting
Your Answer
True/False
Question
Brazing , Welding , Riveting
Correct Answer
An activity can share the same tail event and same head event with any other
activity.
False
Your Answer
True
Select The Blank
Question
Work study is also called ________ study
Correct Answer
Time and Motion
Your Answer
Time and Motion
Multiple Choice Single Answer
Question
Which kind of gauge consists of electrical contacts operating a series of colloured
signal lamps which indicate whether the dimension is correct, oversize or
undersize?
Correct Answer
Multiple gauging
Your Answer
Multiple gauging
Multiple Choice Multiple Answer
Question
Components of Production Management include
Correct Answer
Capacity Planning , Job Design , Production Planning
Your Answer
Capacity Planning , Job Design , Production Planning
True/False
Question
Only skilled worker can use the fixed limit gauge.
Correct Answer
False
Your Answer
False
Multiple Choice Multiple Answer
Question
Which are major benefits of identifying the critical path?
Correct Answer
It helps to identify the set of activities and events which are critical and as such
must be carefully controlled and monitored , It identifies activities to be given
preference in allocation of resources. , It helps to exercise "control by exception".
It helps to identify the set of activities and events which are critical and as such
must be carefully controlled and monitored , It reduces the paperwork , It
identifies activities to be given preference in allocation of resources.
Your Answer
Multiple Choice Multiple Answer
Question
Which are reason due to which the progress of work is rarely in line with it's plan?
Correct Answer
Your Answer
Select The Blank
Question
Absenteeism , Machine breakdowns , Substandard performance against prefixed
production standards
Absenteeism , Machine breakdowns , Substandard performance against prefixed
production standards
Correct Answer
The ________ is necessary when the job requires detailed of one or more of the
job characteristics with the help of special equipment which is not available at the
producing company.
Inspection order
Your Answer
Inspection order
Multiple Choice Multiple Answer
Question
Which of the following are important considerations concerning activity times?
Correct Answer
Your Answer
Select The Blank
Question
Activity time should be obtained from the person responsible for the completion of
an activity , Activity time must be independent of any influence which the
preceding or succeeding activity may have on it. , Activity time may assume that
just the normal quantity of resources required to carry out the activity are
available.
Activity time should be obtained from the person responsible for the completion of
an activity , Activity time must be independent of any influence which the
preceding or succeeding activity may have on it. , Activity time may assume that
just the normal quantity of resources required to carry out the activity are
available.
Correct Answer
Capacity decisions have a direct influence on performance of production system in
respect of ________
Delivery performance
Your Answer
Delivery performance
True/False
Question
Correct Answer
Breakdown of machines, absenteeism of worker does not dislocate the
manufacturing activity in process layout
True
Your Answer
True
Multiple Choice Single Answer
Question
The process of changing inputs into outputs thereby adding some value to entity
can be defined as
Correct Answer
Operation
Your Answer
Operation
Multiple Choice Multiple Answer
Question
Which of the following possibilities can be explored by using flow process chart?
Correct Answer
Your Answer
Eliminating the operations or combining the operations with another , Reducing
the distance traveled by the workmen or materials , Avoiding the waiting time and
thereby reduce production losses
Eliminating the operations or combining the operations with another , Reducing
the distance traveled by the workmen or materials , Avoiding the waiting time and
thereby reduce production losses
Multiple Choice Single Answer
Question
The document raised by PPC which authorises different functions to take action as
per instruction is called
Correct Answer
Work Order
Your Answer
True/False
Question
Work Order
Correct Answer
Dust gets mixed with lubricants, forms an abrasive substance and causes premature failure of machinery.
True
Your Answer
True
Match The Following
Question
Correct Answer
Your Answer
Draining and refilling of oil
reserviors of plunger pump
Yearly
Yearly
Parts lubricated with oil nipple
Daily
Daily
Tools and slideways
two to three times a day
two to three times a day
Table lubrication
Weekly
Weekly
Select The Blank
Question
Correct Answer
Production control work is ________ in case of floor inspection as compared with
the centralised inspection.
easier
Your Answer
easier
True/False
Question
Operation process charts though indicates the sequence of events but do not show
movements.
Correct Answer
True
Your Answer
True
Select The Blank
Question
Correct Answer
The ________ is the probability that a bad lot will be accepted by the sampling
plan.
Consumer's risk
Your Answer
Consumer's risk
Select The Blank
Question
A ________ is another form of subcontracting.
Correct Answer
Hiring capacity
Your Answer
Hiring capacity
Select The Blank
Question
Correct Answer
The ________ breakdowns usually cost more, partly due to damage done to the
adjustment components and partly due to emergency actions.
Unexpected
Your Answer
Unexpected
Select The Blank
Question
Correct Answer
Production Planning is a centralised activity which includes functions such as
________
Scheduling
Your Answer
Scheduling
Multiple Choice Single Answer
Question
Which is the zone beyond LTPD in case of Oc curve of a general plan?
Correct Answer
Zone of rejection
Your Answer
Zone of rejection
Multiple Choice Single Answer
Question
Where the ignorance towards the degradation of machine leads to?
Correct Answer
Eventual breakdown
Your Answer
Eventual breakdown