POM assgn : Shagun
True/False
Question
It pays in the long run to inform the customer regarding expected delays in the
deliveries.
Correct Answer True
Your Answer
True
Multiple Choice Single Answer
Question
Fixed position layout is adopted when
Correct Answer product is very heavy involving assembly of large number of parts
Your Answer
product is very heavy involving assembly of large number of parts
Select The Blank
Question
The ________ is the defect level for which lots are regarded as bad lots.
Correct Answer Lot Tolerance Percentage Defective
Your Answer
Lot Tolerance Percentage Defective
Multiple Choice Multiple Answer
Question
Which are the advantages of suburban location?
Correct Answer Avaialability of adequate land at lower cost , Both skilled and unskilled labour can be
available , Plant expansion is easier due to less or no restriction for building and
construction
Your Answer
Avaialability of adequate land at lower cost , Both skilled and unskilled labour can be
available , Plant expansion is easier due to less or no restriction for building and
construction
Select The Blank
Question
One detachable ticket is prepared for each ________.
Correct Answer Operation
Your Answer
Worker
Select The Blank
Question
A good maintenance system is not a luxary but a ________.
Correct Answer Necessity
Your Answer
Necessity
Multiple Choice Multiple Answer
Question
Following are some of the factors which influence process planning
Correct Answer Order Quantity , Process capability of machine , Delivery Dates
Your Answer
True/False
Order Quantity , Delivery Dates , Plant layout
Question
Availability of training schools, colleges and management institutes reduces the
company's internal training needs.
Correct Answer True
Your Answer
False
Multiple Choice Multiple Answer
Question
Which of the following are examples of pure materials?
Correct Answer Bakeries , Ice factories , Woolen
Your Answer
Bakeries , Ice factories , Lime stone
Match The Following
Question
Correct Answer
Your Answer
Emerson Efficiency Plan
Wage Payment
Wage Payment
Craft
Facilities Planning
Production Scheduling
Work Sampling
Machine utilization
Sampling Inspection
Gantt Chart
Production Scheduling
Charting technique
Match The Following
Question
Correct Answer
Your Answer
Fixation of inventory level
Reorder level
Stock on hand
Symptom of ill planned
purchasing
Over ordering
Over ordering
Factor influencing material
planning
Lead time
Lead time
Net requirement of material under Stock on hand
MRP
Price of material
Multiple Choice Multiple Answer
Question
Which of the following are steps to identify the critical path in a small network?
Correct Answer Compare the durations of all paths to identify the longest
of activities along each path. , Enumerate all paths in the
activities on each path.
Your Answer
Compare the durations of all paths to identify the longest
of activities along each path. , Enumerate all paths in the
activities on each path.
path. , Sum up the durations
network and list down
path. , Sum up the durations
network and list down
Select The Blank
Question
In case of an OC curve, the risk of rejecting a good quality lot may vary between
________.
Correct Answer 0.01 to 10%
Your Answer
0.01 to 10%
True/False
Question
Tool breakage has got nearly zero chances in case of eventual breakdown.
Correct Answer False
Your Answer
False
Multiple Choice Multiple Answer
Question
Which are the three types of float?
Correct Answer Total float , Independent float , Free float
Your Answer
Total float , Dependent float , Free float
Multiple Choice Multiple Answer
Question
Which of the following are major inputs to scheduling?
Correct Answer Overlapping of operations , Effective Capacity per work centre , Performance standards
Your Answer
Effective Capacity per work centre , Ratio of skilled to unskilled labour , Performance
standards
Multiple Choice Single Answer
Question
Any premise in which persons are employed for purpose of making any product/s is
called
Correct Answer Factory
Your Answer
Factory
Select The Blank
Question
The ________ is the maximum percentage defective that for the purpose of sampling
inspection can be considered satisfactory as a process average.
Correct Answer Acceptable quality level
Your Answer
Lot Tolerance Percentage Defective
Select The Blank
Question
The ________ is the maintenance work initiated on a result of knowledge of the
condition of an item from routine or continuous checking.
Correct Answer Condition monitoring
Your Answer
Overhauling
Select The Blank
Question
OC curve of ideal sampling plan suggests that all lots less than 3% defectives have the
probability of acceptance of ________.
Correct Answer One
Your Answer
One
Multiple Choice Single Answer
Question
How to calculate activity cost slope?
Correct Answer Activity cost slope = ( Crash cost - Normal cost ) / ( Normal time - Crash time )
Your Answer
Activity cost slope = ( Normal cost - Crash cost ) / ( Normal time - Crash time )
Multiple Choice Multiple Answer
Question
Which of the following are minimum requirement for a good quality of design?
Correct Answer Resonable cost , Resonable procurement time , Resonable manufacturing time
Your Answer
Resonable cost , Resonable procurement time , Resonable manufacturing time
True/False
Question
In case of control chart, large smaples such as n=15 or 20 are used if the process
standard deviation is small.
Correct Answer False
Your Answer
True
Select The Blank
Question
Production control work is ________ in case of floor inspection as compared with the
centralised inspection.
Correct Answer easier
Your Answer
labourious
Multiple Choice Single Answer
Question
Production Planning includes
Correct Answer Predetermination of manufacturing requirements
Your Answer
Predetermination of manufacturing requirements
Multiple Choice Single Answer
Question
How does the control chart of statistical quality control helps the operating personnel?
Correct Answer Identify the presence of an assignable cause before it develops
Your Answer
Reduces chances of rejections
Multiple Choice Single Answer
Question
What can be the worst effect due to excessive vibration?
Correct Answer Breakdown
Your Answer
Reduced salvage value of machine
Multiple Choice Single Answer
Question
What do you understand by the metallergical aspects of product which forms the vital
part of engineering function?
Correct Answer Material specifications
Your Answer
Performance specifications
Multiple Choice Single Answer
Question
Which of the following is a cause of plant breakdown?
Correct Answer Overloading of machines
Your Answer
Overloading of machines
Multiple Choice Multiple Answer
Question
Which of the following possibilities can be explored by using flow process chart?
Correct Answer Eliminating the operations or combining the operations with another , Reducing the
distance traveled by the workmen or materials , Avoiding the waiting time and thereby
reduce production losses
Your Answer
Reducing the distance traveled by the workmen or materials , Reducing rejections
drastically , Avoiding the waiting time and thereby reduce production losses
Multiple Choice Single Answer
Question
Material Planning is an integral part of
Correct Answer Production Planning
Your Answer
Process Planning
True/False
Question
Dust gets mixed with lubricants, forms an abrasive substance and causes pre-mature
failure of machinery.
Correct Answer True
Your Answer
True
Multiple Choice Multiple Answer
Question
Which of the following activities are used while recording for method study?
Correct Answer Delay , Operation , Inspection
Your Answer
Operation , Inspection , Production
True/False
Question
In case of centralised inspection, inspection rooms generally become bottleneck and
cause delay in taking action regarding rejection or rework.
Correct Answer True
Your Answer
True
Select The Blank
Question
The ________ advocates maintenance procedures whereby the condition of the plant is
constantly watched through systematic inspection to unearth unhealthy conditions and
preventive
Correct Answer Preventive Maintenance
Your Answer
True/False
Preventive Maintenance
Question
The problems of congestion, bottlenecks and backtracking can not be visualized by
using templates and models.
Correct Answer False
Your Answer
False
Multiple Choice Single Answer
Question
Which varaible is taken along the abscissa or X axis?
Correct Answer Time
Your Answer
Quality
True/False
Question
Delay in completion of projects result in unwelcome additions to the fixed
manufacturing expenses.
Correct Answer True
Your Answer
True
Select The Blank
Question
The term ________ emplies the foregone profit due to inability of company to produce.
Correct Answer Opportunity cost
Your Answer
Idle wages
Multiple Choice Single Answer
Question
Taxes / duties levied is one of the important determinant for location decision as
taxes/duties substantially influence
Correct Answer Product cost
Your Answer
Order procurement
Multiple Choice Multiple Answer
Question
What are the uses of failure statistics analysis?
Correct Answer To forecast the defect , To identify causes of major repetative failures , To quantify the
frequency of preventive inspection
Your Answer
To forecast the defect , To identify causes of major repetative failures , To quantify the
frequency of preventive inspection
True/False
Question
Shop order is one of the subsidiary order
Correct Answer True
Your Answer
True
Multiple Choice Single Answer
Question
Which of the following is the most popular technique for Project Production?
Correct Answer PERT & CPM
Your Answer
PERT & CPM
Select The Blank
Question
The ________ is the probability that a good lot will be rejected by the sampling plan.
Correct Answer Producer's risk
Your Answer
Lot Tolerance Percentage Defective
True/False
Question
The component produced on completely automatic machines may be subjected to
sampling inspection while parts produced on semi-automatic and completely manual
operated machines require cent percent inspection.
Correct Answer True
Your Answer
False
Multiple Choice Multiple Answer
Question
In an organization there may not be a formal PPC department if
Correct Answer Work is highly repetitive in nature , Planning activities are performed by the line staff ,
Number of workmen is not very large
Your Answer
Work is highly repetitive in nature , Planning activities are performed by the line staff ,
Number of workmen is not very large
Multiple Choice Multiple Answer
Question
Which of the following factors play important role while selecting or rejecting a
particular site from legislation and taxation point of view?
Correct Answer Labour laws , Building codes , Policies regarding issue of licences
Your Answer
Labour laws , Policies regarding issue of licences , Productivity of labour