Document 16046232

LIST OF ATTEMPTED QUESTIONS AND ANSWERS

True/False

Question Planned lubrication is said to be the nervous system of the equipment.

Correct Answer True

Your Answer True

Multiple Choice Multiple Answer

Question Features of Cellular layout are

Correct Answer It is a type of mixed layout , Uses concept of Group Technology ,

Facilities are grouped in to cells

Your Answer It is a type of mixed layout , Uses concept of Group Technology ,

Facilities are grouped in to cells

Select The Blank

Question The ________ is the watch dog which ensures that every element of production and activities which could affect the quality of end product are regulated to the extent desirable.

Correct Answer Quality control

Your Answer Quality control


Question What are the advantages of three dimensional models?

Correct Answer Even non-technical person can use it , Overhead facilities can be shown , Can be shifted easily and quickly

Your Answer Even non-technical person can use it , Overhead facilities can be shown , Can be shifted easily and quickly

Multiple Choice Single Answer

Question Production Planning includes

Correct Answer Predetermination of manufacturing requirements

Your Answer Review of progress


Question A good plant layout helps in

Correct Answer Reducing handling costs

Your Answer Reducing handling costs


Question Which are the three basic types of control chart by attribute?

Correct Answer p-chart , c-chart , np-chart

Your Answer Xbar-R-chart , c-chart , np-chart


Question The term ________ emplies the foregone profit due to inability of company to produce.

Correct Answer Opportunity cost

Your Answer Opportunity cost


Question Which are different ways to show critical path in a network?

Correct Answer Thick Line , Red Line , Double Line

Your Answer Thick Line , Red Line , Double Line


Question Technique of Value Engineering can be effectively employed in design of a product to

Correct Answer To meet the intended function at lowest cost

Your Answer To meet the intended function at lowest cost


Question Inadequate production capacity ultimately leads to

Correct Answer Poor Customer Service

Your Answer Low Productivity


Question What do you understand by the timeframe for the maintenance needs of the equipment?

Correct Answer Maintenance inspection schedule

Your Answer Material Requirement planning


Question Technique which can help an organization to reduce inventory is called

Correct Answer MRP

Your Answer MRP

Match The Following

Question Correct Answer Your Answer

Scheduling Device Strings Critical Path Analysis

Interruption for machine utilisation

Input for scheduling

Preventive maintenance Overlapping of operations

Overlapping of operations Blackboard

Technique of scheduling Critical Path Analysis JIT


Question Plant Layout is concerned with optimum arrangement of the following

Correct Answer Storage space , Machines , Material Handling Equipment

Your Answer Machines , Material Handling Equipment , Storage space

True/False

Question Independent float either affects the float of preceding activities or that of succeeding activities.

Correct Answer False

Your Answer True


Question Which are the basic requirements of the " Quality of Design "?

Correct Answer Identification of right product , Selection of appropriate features ,

Ensure that product renders satisfactory service to customer

Your Answer Identification of right product , Selection of appropriate features ,

Ensure that product renders satisfactory service to customer


Question Material control function of PPC is concerned with

Correct Answer Preparation of material estimates

Your Answer indenting all required material


Question What do you mean by the verification of object against predetermined standards of quality or quantity or both?

Correct Answer Inspection

Your Answer Inspection


Question Which of the following symbols are used in flow process chart but not used in operation process chart?

Correct Answer Storage , Delay , Transport

Your Answer Delay , Inspection , Transport


Question Which are the distinguished features of TQM ?

Correct Answer Covers all kinds of industries , Gradual removal of interdepartmental barriers , Continuous improvement

Your Answer Covers all kinds of industries , Gradual removal of interdepartmental barriers , Corrective function

True/False

Question F W Taylor devised a system for classifying motions into basic divisions called Therbligs


Your Answer True


Question Components of Production Management include

Correct Answer Capacity Planning , Job Design , Production Planning

Your Answer Capacity Planning , Production Planning , Manpower Planning


Question What do you mean by the chart on which the major activities and entry points of materials are recorded to have graphic view of operations and inspections involved in the process?

Correct Answer Operation process chart

Your Answer Operation process chart


Question Which photographic technique is used to record path of motions of the members of the body during method study?

Correct Answer Cyclograph

Your Answer Cyclograph


Question The ________ must ensure that the product satisfy the functional requirements of it's usage.

Correct Answer Quality of design

Your Answer Quality of conformance


Question The ________ is the probability that a bad lot will be accepted by the sampling plan.

Correct Answer Consumer's risk

Your Answer Lot Tolerance Percentage Defective


Question The ________ advocates maintenance procedures whereby the condition of the plant is constantly watched through systematic inspection to unearth unhealthy conditions and preventive

Correct Answer Preventive Maintenance

Your Answer Design-in Maintenance

True/False

Question In case of forward pass computation, the earliest event time of a plain event equals the earliest event time of the preceding event plus duration of activity emanating from the preceding event.

Correct Answer True

Your Answer True


Question How to claculate the producer risk in the OC Curve?

Correct Answer Probability that a good lot will be rejected by the sampling

Your Answer Probability that a bad lot will be accepted by the sampling

True/False

Question An activity can share the same tail event and same head event with any other activity.


Your Answer False

True/False

Question Expediting action is necessary if the delays and interruptions are abnormal and hence any subsequent delay is bound to extend the promised delivery date.

Correct Answer True

Your Answer False


Question Following are the commonly used factors considered for evaluation of layout in factor analysis method

Correct Answer Flow of material , Equipment utilization , Working condition

Your Answer Flow of material , Equipment utilization , Working condition


Question Which of the following are illustrations of inspection?

Correct Answer Physical count of incoming material against the quantity mentioned in delivery challan , A dimensional check with measuring instrument , Visual check of burrs and finish

Your Answer A dimensional check with measuring instrument , Visual check of burrs and finish , Check the operator performance

True/False

Question Since value of c can never be negativee, hence" if LCLp works out to be negative, it is taken as zero."

Correct Answer True

Your Answer True


Question One detachable ticket is prepared for each ________.

Correct Answer Operation

Your Answer Machine


Question How industry has responded to the fact of existence of inherant variability of the manufacturing process?

Correct Answer Inclusion of certain tolerance on the basic dimensions in the drawing

Your Answer Inclusion of certain tolerance on the basic dimensions in the drawing

True/False

Question Job life is one of the factors that influence Process Planning

Correct Answer True

Your Answer False


Question Which of the following products should be produced by using mass production?

Correct Answer Refrigerator , Tyre for automobile , Television Set

Your Answer Refrigerator , Tyre for automobile , Television Set


Question A good maintenance system is not a luxary but a ________.

Correct Answer Necessity

Your Answer Necessity

True/False

Question Process layout is also called line layout


Your Answer True


Question Which document is used for returning the surplus material?

Correct Answer Stores Return Note

Your Answer Stores Return Note


Question The ________ pertain to the climatic conditions which the component , product or material should withstand.

Correct Answer Environmental specifications

Your Answer Environmental specifications


Question Which of the following cases can be referred as operation in method study recording?

Correct Answer Change in physical characteristic , Consumption of physical effort , Change in chemical characteristic

Your Answer Change in physical characteristic , Movement of material ,

Change in chemical characteristic

True/False

Question Breakdown of machines, absenteeism of worker does not dislocate the manufacturing activity in process layout

Correct Answer True

Your Answer True


Question A ________helps to avoid crowding of jobs at a particular machine by change of route of some of the jobs or by diverting work to other machine.

Correct Answer Control board

Your Answer Move order

Document 16046232

Products

Support

Document 16046232

Add this document to collection(s)

Add this document to saved

Suggest us how to improve StudyLib