POM assgn : Rahul
Multiple Choice Multiple Answer
Question
What are the benefits of reconditioning?
Correct Answer Eliminates problems and frequent breakdowns , Increases life of an equipment , It helps
to plan requirement of replacement spares
Your Answer
Eliminates problems and frequent breakdowns , Increases life of an equipment , It helps
to plan requirement of replacement spares
Select The Blank
Question
Production control work is ________ in case of floor inspection as compared with the
centralised inspection.
Correct Answer easier
Your Answer
time consuming
Multiple Choice Single Answer
Question
What is the nature of the sampling plan for critical defects?
Correct Answer Tight
Your Answer
Moderate
Select The Blank
Question
Work study is also called ________ study
Correct Answer Time and Motion
Your Answer
Time and Motion
Multiple Choice Multiple Answer
Question
Which of the following information is available in summary of part in a chart during
methods study?
Correct Answer Frequency of each symbol , Total time for each symbol , Total distance travelled by the
object
Your Answer
Frequency of each symbol , Total time for each symbol , Present and proposed method
True/False
Question
Development of a good lubrication programme begins with the identification of
lubrication points.
Correct Answer True
Your Answer
True
Multiple Choice Multiple Answer
Question
Which of the following are important considerations concerning activity times?
Correct Answer Activity time should be obtained from the person responsible for the completion of an
activity , Activity time must be independent of any influence which the preceding or
succeeding activity may have on it. , Activity time may assume that just the normal
quantity of resources required to carry out the activity are available.
Your Answer
Activity time should be obtained from the person responsible for the completion of an
activity , Infinite resources are available to carry out the activity , Activity time must be
independent of any influence which the preceding or succeeding activity may have on it.
Select The Blank
Question
The ________ includes preventive maintenance activities whose needs are identified
through inspection which requires stoppage of machines.
Correct Answer Shutdown Maintenance
Your Answer
True/False
Question
Shutdown Maintenance
The operator should not stop production if first piece is not approved by the inspector.
Correct Answer False
Your Answer
True/False
Question
False
Sampling inspection suffice to check the work of line inspectors and stage inspectors.
Correct Answer True
Your Answer
False
True/False
Question
Feasibility of time schedule requires that an activity be scheduled before any of it's
predecessors are scheduled.
Correct Answer False
Your Answer
True
True/False
Question
In case of backward pass computation method, the latest event time represents the
latest occurrence time of the event.
Correct Answer True
Your Answer
True
Select The Blank
Question
Capacity decisions have a direct influence on performance of production system in
respect of ________
Correct Answer Delivery performance
Your Answer
Quality
Multiple Choice Single Answer
Question
Which of the following technique is event oriented ?
Correct Answer Project Evaluation & Review Technique
Your Answer
Project Engineering & Resources Technique
Select The Blank
Question
An ________ history card is the record of all repairs, replacements and engineering
changes carried out in the equipment during it's period of service.
Correct Answer Equipment history card
Your Answer
Equipment history card
Select The Blank
Question
The ________ breakdowns usually cost more, partly due to damage done to the
adjustment components and partly due to emergency actions.
Correct Answer Unexpected
Your Answer
Unexpected
Multiple Choice Single Answer
Question
Which is the ideal place to write a time allotted for an activity in a network?
Correct Answer Below the arrow
Your Answer
Below the arrow
Multiple Choice Single Answer
Question
Any premise in which persons are employed for purpose of making any product/s is
called
Correct Answer Factory
Your Answer
Factory
Multiple Choice Single Answer
Question
The ratio of output to input of a production system is commonly known as
Correct Answer Productivity
Your Answer
Productivity
Match The Following
Question
Correct Answer
Your Answer
Combined Layout
Mixed Layout
Mixed Layout
Fixed Position Layout
Project Layout
Project Layout
Product Layout
Line Layout
Line Layout
Process Layout
Functional Layout
Functional Layout
Select The Blank
Question
The ________ is the maintenance work initiated on a result of knowledge of the
condition of an item from routine or continuous checking.
Correct Answer Condition monitoring
Your Answer
Overhauling
Multiple Choice Multiple Answer
Question
Which of the following factors related to the labour and wages are considered while
deciding the plant location?
Correct Answer Prevailing wage pattern , Productivity of labour , Industrial relations
Your Answer
Prevailing wage pattern , Productivity of labour , Industrial relations
Multiple Choice Single Answer
Question
What do you mean by planned corrective manitenance which provides an opportunity to
undertake design modifications in the equipment to eliminate or reduce frequency of
breakdowns.
Correct Answer Design-out Maintenance
Your Answer
Design-in Maintenance
True/False
Question
It pays in the long run to inform the customer regarding expected delays in the
deliveries.
Correct Answer True
Your Answer
True
Select The Blank
Question
The ________ is a set of tools and techniques by which products are made to comply
with the specifications at minimum cost to the firm.
Correct Answer Quality control system
Your Answer
Quality control system
Multiple Choice Single Answer
Question
Which kind of labour force is required in case of Jobbing Production?
Correct Answer Highly Skilled
Your Answer
Highly Skilled
Match The Following
Question
Correct Answer
Your Answer
Temperature of motor
Body
Watch
Exhaust gas
Smell
Smell
Air leakage
Listen
Listen
Corrosion
Watch
Body
Multiple Choice Single Answer
Question
Which is the most popular scientific tool for project planning?
Correct Answer Critical path analysis
Your Answer
Fishbone diagram
Multiple Choice Single Answer
Question
One of the sophisticated operations research techniques used in material planning is
Correct Answer Dynamic programming
Your Answer
MAPI method
Select The Blank
Question
A set of activities to keep an equipment in the specified condition is called as ________.
Correct Answer Maintenance
Your Answer
True/False
Question
Maintenance
Cent percent inspection is required on WIP prior to the key, critical or costly operation.
Correct Answer True
Your Answer
True
Multiple Choice Single Answer
Question
The process of changing inputs into outputs thereby adding some value to entity can be
defined as
Correct Answer Operation
Your Answer
Manufacturing
Select The Blank
Question
In case of an OC curve, the risk of rejecting a good quality lot may vary between
________.
Correct Answer 0.01 to 10%
Your Answer
0.01 to 10%
Multiple Choice Multiple Answer
Question
Which of the following can be subtypes of corrective maintenance?
Correct Answer Shutdown Maintenance , Design-out Maintenance , Design-in Maintenance
Your Answer
Shutdown Maintenance , Design-out Maintenance , Design-in Maintenance
Multiple Choice Multiple Answer
Question
What are uses of diagrams in method study?
Correct Answer Study different plant layouts and select the most optimum one , Study the extent of
traffic over the different routes of the plant , Identify the extent of backtracking, cross
traffic and obstacles encountered during the movement of material.
Your Answer
Study different plant layouts and select the most optimum one , Study the extent of
traffic over the different routes of the plant , Identify the extent of backtracking, cross
traffic and obstacles encountered during the movement of material.
Multiple Choice Single Answer
Question
In case of Batch Production which kind of labour is expected?
Correct Answer Skilled in one specific Manufacturing Process
Your Answer
Skilled in one specific Manufacturing Process
Multiple Choice Single Answer
Question
What do you understand by the inspection conducted on all nonreworkable jobs prior to
their movement to the scrap yard?
Correct Answer Salvage inspection
Your Answer
Salvage inspection
True/False
Question
Cent percent inspection does not mean inspection of component for 100% quality
characteristics.
Correct Answer True
Your Answer
True
Multiple Choice Multiple Answer
Question
Following are some of the factors considered for evaluation of alternative layouts
Correct Answer Flow of Material , Equipment utilization , Ease of supervision
Your Answer
Flow of Material , Equipment utilization , Delivery performance
True/False
Question
In a control chart, as a general rule, time interval should be inversely proportional to
the average frequency of out of control conditions.
Correct Answer False
Your Answer
True
Multiple Choice Multiple Answer
Question
Which of the following situations demand the technical consideration while selecting a
job for method study?
Correct Answer Jobs having inconsistent quality , Operations inviting frequent requests from supervisors
for relaxation in allowed time because of variations in materials and tool performance ,
Jobs in which too many man-hours are spend in checking and rechecking work
Your Answer
Excessive overtime , Operations inviting frequent requests from supervisors for
relaxation in allowed time because of variations in materials and tool performance , Jobs
in which too many man-hours are spend in checking and rechecking work
Multiple Choice Single Answer
Question
Which kind of relationship exists between those activities which can be carried out
simultaneously and both activities require definite time to finish?
Correct Answer Concurrent activities
Your Answer
Concurrent activities
Select The Blank
Question
An Ideal OC curve is ________ shaped curve that accpets all the lots with quality equal
to or better than AQL .
Correct Answer Rectangular
Your Answer
Oval
Multiple Choice Single Answer
Question
What is expected from stores department after they receive the stores issue order from
dispatcher?
Correct Answer Keep material ready for issue to shop when authorized
Your Answer
Keep material ready for issue to shop when authorized
Multiple Choice Multiple Answer
Question
Which are the distinct functions of scientific quality control?
Correct Answer Acceptance function , Preventive function , Assurance function
Your Answer
Feedback function , Preventive function , Assurance function
Multiple Choice Multiple Answer
Question
Which are major benefits of identifying the critical path?
Correct Answer It helps to identify the set of activities and events which are critical and as such must be
carefully controlled and monitored , It identifies activities to be given preference in
allocation of resources. , It helps to exercise "control by exception".
Your Answer
It helps to identify the set of activities and events which are critical and as such must be
carefully controlled and monitored , It identifies activities to be given preference in
allocation of resources. , It helps to exercise "control by exception".
Multiple Choice Multiple Answer
Question
Material Requirement Planning is very useful in following situations
Correct Answer Long Lead time for procurement , Several levels of assemblies in product , Long
manufacturing cycle
Your Answer
Long Lead time for procurement , Several levels of assemblies in product , Demand for
the product is not known