POM assgn : Deepak Select The Blank Question

Select The Blank

Question

Correct Answer

Your Answer


Question

Correct Answer

Your Answer

POM assgn : Deepak

Work study is also called ________ study

Time and Motion

Time and Motion

The ________ includes preventive maintenance activities whose needs are identified through inspection which requires stoppage of machines.

Shutdown Maintenance

Running Maintenance

Multiple Choice Single Answer

Question What is the reason of fluctuations, if the control chart evaluates that the process is not in a state of statistical control?

Correct Answer Assignable variability

Your Answer Planned variability


Question

Correct Answer

Which of the following techniques is used by industrial engineering department to obtain the utilisation index?

Work Sampling Studies

Your Answer Break Even Analysis


Question Process type layout is suitable when

Correct Answer

Your Answer there is wide variation in processing time of operations

Product is required in huge quantity

Multiple Choice Multiple Answer

Question What are the advantages of three dimensional models?

Correct Answer

Your Answer

Even non-technical person can use it , Overhead facilities can be shown , Can be shifted easily and quickly

Even non-technical person can use it , Overhead facilities can be shown ,

Economical


Question

Correct Answer

One detachable ticket is prepared for each ________.

Operation

Your Answer Operation

True/False

Question Since recording by descriptive method has it's limitations, it is not recommended for use in method study.

Correct Answer

Your Answer

Match The Following

Question

True

True

Combined Layout

Fixed Position Layout

Product Layout

Correct Answer

Mixed Layout

Project Layout

Line Layout

Your Answer

Mixed Layout

Project Layout

Line Layout

Process Layout


Question

Correct Answer

Your Answer

Functional Layout Functional Layout

The ________ pertain to the climatic conditions which the component , product or material should withstand.

Environmental specifications

Material specifications


Question Which of the following situations demand that the human consideration should be given preference over other considerations?

Correct Answer

Your Answer

Inconsistent earnings where the earnings are tied to output , Poor morale evidenced by petty or trivial complaints , Repeated cases of accidents and health hazards

Excessive rejections , Poor morale evidenced by petty or trivial complaints ,

Repeated cases of accidents and health hazards


Question Which are the different situations in which the process capability studies of the

Correct Answer

Your Answer various process are likely to fit?

Process variability is just adequate , Good process variability but bad process centering , Good process variability but poor process centering

Very good process variability but process is off-centre , Good process variability but bad process centering , Good process variability but poor process centering


Question

Correct Answer

A set of activities to keep an equipment in the specified condition is called as

________.

Maintenance

Your Answer Maintenance

True/False

Question

Correct Answer

Your Answer

Feasibility of time schedule requires that an activity be scheduled before any of it's predecessors are scheduled.

False

True


Question How industry has responded to the fact of existence of inherant variability of the manufacturing process?

Correct Answer Inclusion of certain tolerance on the basic dimensions in the drawing

Your Answer Inclusion of certain tolerance on the basic dimensions in the drawing

Match The Following

Question Correct Answer Your Answer

Factor Analysis Method to evaluate layouts

Minimization of production delays Objective of good layout

Method to evaluate layouts

Principles of good layout

Maximum visibility

Scale model

Principles of good layout

Layout analysis

Technique for evolving and analysis of layouts

Modelling approach to layouts


Question Which of the following are the most suitable cases where we can use CPA as

Correct Answer effective technique of scheduling?

Overhauling of a CNC machine , Purchase and installation of a newly imported special purpose machine , Design, production and testing of prototype of a fighter aircraft.

Your Answer Overhauling of a CNC machine , Purchase and installation of a newly imported special purpose machine , Production of batch of 1000 jobs on two machines

True/False

Question

Correct Answer

With a general OC curve, probability of acceptance of lots of good quality is never unity.

True

Your Answer True


Question

Correct Answer

Your Answer

OC curve of ideal sampling plan suggests that all lots less than 3% defectives have the probability of acceptance of ________.

One

Two


Question

Correct Answer

Your Answer

The ________ is necessary when the job requires detailed of one or more of the job characteristics with the help of special equipment which is not available at the producing company.

Inspection order

Job card


Question Production Planning is a centralised activity which includes functions such as

________

Correct Answer

Your Answer

Scheduling

Scheduling


Question Which of the following products should be produced by using mass production?

Correct Answer Refrigerator , Tyre for automobile , Television Set

Your Answer Refrigerator , Tyre for automobile , Television Set


Question Following is not an input information for Process Planning

Correct Answer Inventory level

Your Answer Standard Time Data

True/False

Question

Correct Answer

Your Answer

All activities must not be tied up into the network

False

True

True/False

Question

Correct Answer

Your Answer

All activities lying on the non-critical paths must have total float and free float.

False

False

True/False

Question

Correct Answer

Your Answer

Grouping of machines gives a lot of flexibility in loading and scheduling

True

True


Question One of the following is not a gross material

Correct Answer cotton

Your Answer Timber

True/False

Question

Correct Answer

Your Answer

Limit gauges are not useful when it is necessary to measure the exact amount of variation.

True

False


Question What is the relation between duration of an activity and length of an arrow?

Correct Answer No relation

Your Answer No relation


Question Which are different ways to show critical path in a network?

Correct Answer Thick Line , Red Line , Double Line

Your Answer Thick Line , Dotted line


Question

Correct Answer

Which manufacturing method is ideal for the use of air gauges as inspection device?

Mass

Your Answer Process


Question Which of the following can be subtypes of corrective maintenance?

Correct Answer

Your Answer

Shutdown Maintenance , Design-out Maintenance , Design-in Maintenance

Predictive Maintenance , Design-out Maintenance , Design-in Maintenance


Question

Correct Answer

What are the uses of the instruction manual provided by the manufacturer of a machine?

It gives instructions regarding installation and operation of the equipment , It contains note on common troubles with causes and remedies for troubleshooting

Your Answer

, It enlists points, frequency and type of lubrication

It gives instructions regarding installation and operation of the equipment , It contains note on common troubles with causes and remedies for troubleshooting

, It enlists points, frequency and type of lubrication


Question

Correct Answer

The ________ is a set of tools and techniques by which products are made to comply with the specifications at minimum cost to the firm.

Quality control system

Your Answer Design system


Question Provision of drainage facilities is important for the following type of industry

Correct Answer

Your Answer

Chemical Process

Chemical Process


Question

Correct Answer

Your Answer

Which are three different bases to establish an activity time?

Past experience , Judgement , Historical data

Actual measurement , Past experience , Historical data


Question Inherent Safety' is one of the principle of good layout. In context of layout, this

Correct Answer can be achieved by the following

Clear gangway, location of material and material handling system

Your Answer Clear gangway, location of material and material handling system


Question Which of the following are examples of attributes?

Correct Answer

Your Answer

Cracks , Burrs , Texture

Cracks , Hardness , Burrs

True/False

Question

Correct Answer

Your Answer

Diversified labour is adequately available in rural area as compared to urban area.

False

True

True/False

Question

Correct Answer

Fixed cost is lower in case of continuous production than intermittent production.

False

Your Answer True


Question

Correct Answer

Your Answer

Why graphical method of recording is preferred over the descriptive method during method study?

It segregates effective part form ineffective parts , It reduces effort involved in writing , Critical examinations easier and more effective

It segregates effective part form ineffective parts , It reduces effort involved in writing , Critical examinations easier and more effective


Question Process planning is the process of

Correct Answer

Your Answer establishing shortest and most economic path of production establishing shortest and most economic path of production


Question Which are the different types of flow process charts used for method study?

Correct Answer Equipment type , Man type , Material type

Your Answer

True/False

Question

Correct Answer

Your Answer

Your Answer

Equipment type , Material type , Operator type

In case of X bar-R charts, statistical limits are calculated from averages of samples of n (4,5,…) instead of single sample of large size to reduce the spread of natural variability.

True

True


Question How does motion economy prove useful in mass production?

Correct Answer It improves work bench layout and evolve logical sequence of assembly of parts

It improves work bench layout and evolve logical sequence of assembly of parts


Question

Correct Answer

Your Answer

The ________ is the probability that a bad lot will be accepted by the sampling plan.

Consumer's risk

Lot Tolerance Percentage Defective


Question

Correct Answer

Your Answer

Goods after final inspection should accompany ________to enable dispatch department to identify and draw correct reference.

Forwarding note

Forwarding note

POM assgn : Deepak Select The Blank Question

Products

Support

POM assgn : Deepak Select The Blank Question

Add this document to collection(s)

Add this document to saved

Suggest us how to improve StudyLib