Multiple Choice Single Answer Question

POM assgn : Meena

Multiple Choice Single Answer

Question MRP is based on the concept of inventory demand which is of following type

Correct Answer Dependent and independent

Your Answer Dependent and independent


Question Main objective of a good plant layout is

Correct Answer Reduce material handling cost

Your Answer Reduce material handling cost

True/False

Question As a general rule, the number of tail event of an activity is more than that of it's head event.

Correct Answer False

Your Answer False

Select The Blank

Question The ________ is the probability that a good lot will be rejected by the sampling plan.

Correct Answer Producer's risk

Your Answer Producer's risk

Multiple Choice Multiple Answer

Question Which of the following are important considerations concerning activity times?

Correct Answer Activity time should be obtained from the person responsible for the completion of an activity ,

Activity time must be independent of any influence which the preceding or succeeding activity may have on it. , Activity time may assume that just the normal quantity of resources required to carry out the activity are available.

Your Answer Activity time should be obtained from the person responsible for the completion of an activity ,

Activity time must be independent of any influence which the preceding or succeeding activity may have on it. , Activity time may assume that just the normal quantity of resources required to carry out the activity are available.


Question The ________ pertain to the climatic conditions which the component , product or material should withstand.

Correct Answer Environmental specifications

Your Answer Environmental specifications


Question Following are some of the factors considered for evaluation of alternative layouts

Correct Answer Flow of Material , Equipment utilization , Ease of supervision

Your Answer Flow of Material , Ease of supervision , Delivery performance


Question Which of the following are assignable cause?

Correct Answer Large varaitions in hardness of material , Tool wear , Errors in setting

Your Answer Large varaitions in hardness of material , Tool wear , Errors in setting

True/False

Question All activities must not be tied up into the network


Your Answer False


Question In case of an OC curve, the risk of rejecting a good quality lot may vary between ________.

Correct Answer 0.01 to 10%

Your Answer 0.01 to 10%

True/False

Question In case of X bar, if the process is not under control indicated by some points falling outside the control limits, such points outside the control limits are eliminated and new trial control limits for the remaining points are computed.

Correct Answer True

Your Answer True


Question What is the base for considering activity time as single time estimate or three time estimate?

Correct Answer Level of uncertainty

Your Answer Availability of labour


Question The ________ is the maximum percentage defective that for the purpose of sampling inspection can be considered satisfactory as a process average.

Correct Answer Acceptable quality level

Your Answer Acceptable quality level


Question What do you mean by lowest possible direct cost required to complete an activity within it's normal time?

Correct Answer Normal cost

Your Answer Normal cost


Question A good maintenance system is not a luxary but a ________.

Correct Answer Necessity

Your Answer Necessity


Question A ________helps to avoid crowding of jobs at a particular machine by change of route of some of the jobs or by diverting work to other machine.

Correct Answer Control board

Your Answer Move order


Question The ________ is the watch dog which ensures that every element of production and activities which could affect the quality of end product are regulated to the extent desirable.

Correct Answer Quality control

Your Answer Quality control


Question Any premise in which persons are employed for purpose of making any product/s is called

Correct Answer Factory

Your Answer Factory

Match The Following

Question

Emerson Efficiency Plan

Craft

Work Sampling

Gantt Chart

Correct Answer

Wage Payment

Facilities Planning

Machine utilization

Production Scheduling

Your Answer

Wage Payment

Facilities Planning

Machine utilization

Production Scheduling


Question A ________ is another form of subcontracting.

Correct Answer Hiring capacity

Your Answer Hiring capacity


Question In an organization there may not be a formal PPC department if

Correct Answer Work is highly repetitive in nature , Planning activities are performed by the line staff , Number of workmen is not very large

Your Answer Work is highly repetitive in nature , Planning activities are performed by the line staff , Number of workmen is not very large


Question Which of the following cases can be treated as delay during recording of method study?

Correct Answer Operators awaiting instructions from supervisor , Worker waiting for his turn at tools stores , Jobs awaiting at the machines for their turn

Your Answer Operators awaiting instructions from supervisor , Worker waiting for his turn at tools stores , Jobs awaiting at the machines for their turn

True/False

Question Inspection order is must even for simple jobs which can be inspected by shop inspector with the tooling available on shop.


Your Answer False


Question Order preparation process for products manufatured to order requires following documents

Correct Answer Sales Order , Work order , Shop order

Your Answer Sales Order , Work order , Purchase order


Question Technique of Value Engineering can be effectively employed in design of a product to

Correct Answer To meet the intended function at lowest cost

Your Answer Reduce lead time

True/False

Question Cent percent inspection is often more practical and economical than sampling inspection.


Your Answer False


Question Scale model used for layout analysis have following advantages

Correct Answer Nontechnical person finds it easy to comprehend , Ovehead facilities can be shown , Models can be shifted easily

Your Answer Nontechnical person finds it easy to comprehend , Ovehead facilities can be shown , Models can be shifted easily


Question Which of the following technique is event oriented ?

Correct Answer Project Evaluation & Review Technique

Your Answer Project Evaluation & Review Technique


Question What is the meaning of " Product features" according to J.M.Juran?

Correct Answer Quality of design

Your Answer Quality of design

Match The Following

Question

Crash cost of an activity

Normal time of an activity

Crash time of activity

Normal cost of an activity

Correct Answer

Cc

Tn

Tc

Cn

Your Answer

Cc

Tn

Tc

Cn


Question What are uses of diagrams in method study?

Correct Answer Study different plant layouts and select the most optimum one , Study the extent of traffic over the different routes of the plant , Identify the extent of backtracking, cross traffic and obstacles encountered during the movement of material.

Your Answer Study different plant layouts and select the most optimum one , Study the extent of traffic over the different routes of the plant , Identify the extent of backtracking, cross traffic and obstacles encountered during the movement of material.

True/False

Question A load chart specifies the work to be carried out by each person of company during shift hours.


Your Answer True


Question Route Sheet generally contains following information

Correct Answer Material Specification , Sequence of operation , Skill of Labour

Your Answer Material Specification , Sequence of operation , Skill of Labour

True/False

Question Cellular layout is based on the concept of Group Technology

Correct Answer True

Your Answer True


Question Which varaible is taken along the abscissa or X axis?

Correct Answer Time

Your Answer Standard deviation


Question Which are the advantages of suburban location?

Correct Answer Avaialability of adequate land at lower cost , Both skilled and unskilled labour can be available ,

Plant expansion is easier due to less or no restriction for building and construction

Your Answer Avaialability of adequate land at lower cost , Both skilled and unskilled labour can be available ,

Plant expansion is easier due to less or no restriction for building and construction


Question The ________ is the maintenance work initiated on a result of knowledge of the condition of an item from routine or continuous checking.

Correct Answer Condition monitoring

Your Answer Condition monitoring


Question Expediting function is concerned with following activities

Correct Answer Progress chasing to identify delays which may hold up production , Communicating possible delays in delivery date commitment to sales department , Devising cures to keep rate of production in line with schedule

Your Answer Recording progress of work , Progress chasing to identify delays which may hold up production ,

Communicating possible delays in delivery date commitment to sales department


Question Production control work is ________ in case of floor inspection as compared with the centralised inspection.

Correct Answer easier

Your Answer time consuming


Question The easiest way to bring the delayed job within the promised delivery time by using extra shift or weekly holiday is ________.

Correct Answer Overtime working

Your Answer Overtime working

True/False

Question In case of forward pass computation, the earliest event time of the first event is zero.

Correct Answer True

Your Answer True


Question What is represented by an arrow in a network?

Correct Answer Activity

Your Answer Activity

True/False

Question As a general rule, a site five times the actual plant size is considered minimum for parking, access facilities and future expansion.

Correct Answer True

Your Answer True

True/False

Question Independent float either affects the float of preceding activities or that of succeeding activities.


Your Answer False


Question The document raised by PPC which authorises different functions to take action as per instruction is called

Correct Answer Work Order

Your Answer Work Order


Question A good layout makes effective use of space. Utilization of space for a department like Stores can be measured by

Correct Answer Proportion of Cubic volume space utilized

Your Answer Ratio of area utilised to area available


Question The process of changing inputs into outputs thereby adding some value to entity can be defined as

Correct Answer Operation

Your Answer Operation

Multiple Choice Single Answer Question

Products

Support

Multiple Choice Single Answer Question

Add this document to collection(s)

Add this document to saved

Suggest us how to improve StudyLib