LIST OF ATTEMPTED QUESTIONS AND ANSWERS
Multiple Choice Single Answer
Question
MRP is based on the concept of inventory demand which is of
following type
Correct Answer Dependent and independent
Your Answer
Dependent and independent
Multiple Choice Single Answer
Question
Main objective of a good plant layout is
Correct Answer Reduce material handling cost
Your Answer
Reduce material handling cost
True/False
Question
As a general rule, the number of tail event of an activity is more
than that of it's head event.
Correct Answer False
Your Answer
False
Select The Blank
Question
The ________ is the probability that a good lot will be rejected
by the sampling plan.
Correct Answer Producer's risk
Your Answer
Producer's risk
Multiple Choice Multiple Answer
Question
Which of the following are important considerations concerning
activity times?
Correct Answer Activity time should be obtained from the person responsible for
the completion of an activity , Activity time must be independent
of any influence which the preceding or succeeding activity may
have on it. , Activity time may assume that just the normal
quantity of resources required to carry out the activity are
available.
Your Answer
Activity time should be obtained from the person responsible for
the completion of an activity , Activity time must be independent
of any influence which the preceding or succeeding activity may
have on it. , Activity time may assume that just the normal
quantity of resources required to carry out the activity are
available.
Select The Blank
Question
The ________ pertain to the climatic conditions which the
component , product or material should withstand.
Correct Answer Environmental specifications
Your Answer
Environmental specifications
Multiple Choice Multiple Answer
Question
Following are some of the factors considered for evaluation of
alternative layouts
Correct Answer Flow of Material , Equipment utilization , Ease of supervision
Your Answer
Flow of Material , Ease of supervision , Delivery performance
Multiple Choice Multiple Answer
Question
Which of the following are assignable cause?
Correct Answer Large varaitions in hardness of material , Tool wear , Errors in
setting
Your Answer
Large varaitions in hardness of material , Tool wear , Errors in
setting
True/False
Question
All activities must not be tied up into the network
Correct Answer False
Your Answer
False
Select The Blank
Question
In case of an OC curve, the risk of rejecting a good quality lot
may vary between ________.
Correct Answer 0.01 to 10%
Your Answer
0.01 to 10%
True/False
Question
In case of X bar, if the process is not under control indicated by
some points falling outside the control limits, such points outside
the control limits are eliminated and new trial control limits for the
remaining points are computed.
Correct Answer True
Your Answer
True
Multiple Choice Single Answer
Question
What is the base for considering activity time as single time
estimate or three time estimate?
Correct Answer Level of uncertainty
Your Answer
Availability of labour
Select The Blank
Question
The ________ is the maximum percentage defective that for the
purpose of sampling inspection can be considered satisfactory
as a process average.
Correct Answer Acceptable quality level
Your Answer
Acceptable quality level
Multiple Choice Single Answer
Question
What do you mean by lowest possible direct cost required to
complete an activity within it's normal time?
Correct Answer Normal cost
Your Answer
Normal cost
Select The Blank
Question
A good maintenance system is not a luxary but a ________.
Correct Answer Necessity
Your Answer
Necessity
Select The Blank
Question
A ________helps to avoid crowding of jobs at a particular
machine by change of route of some of the jobs or by diverting
work to other machine.
Correct Answer Control board
Your Answer
Move order
Select The Blank
Question
The ________ is the watch dog which ensures that every
element of production and activities which could affect the quality
of end product are regulated to the extent desirable.
Correct Answer Quality control
Your Answer
Quality control
Multiple Choice Single Answer
Question
Any premise in which persons are employed for purpose of
making any product/s is called
Correct Answer Factory
Your Answer
Factory
Match The Following
Question
Correct Answer
Your Answer
Emerson Efficiency Plan
Wage Payment
Wage Payment
Craft
Facilities Planning
Facilities Planning
Work Sampling
Machine utilization
Machine utilization
Gantt Chart
Production Scheduling
Production Scheduling
Select The Blank
Question
A ________ is another form of subcontracting.
Correct Answer Hiring capacity
Your Answer
Hiring capacity
Multiple Choice Multiple Answer
Question
In an organization there may not be a formal PPC department if
Correct Answer Work is highly repetitive in nature , Planning activities are
performed by the line staff , Number of workmen is not very large
Your Answer
Work is highly repetitive in nature , Planning activities are
performed by the line staff , Number of workmen is not very large
Multiple Choice Multiple Answer
Question
Which of the following cases can be treated as delay during
recording of method study?
Correct Answer Operators awaiting instructions from supervisor , Worker waiting
for his turn at tools stores , Jobs awaiting at the machines for
their turn
Your Answer
Operators awaiting instructions from supervisor , Worker waiting
for his turn at tools stores , Jobs awaiting at the machines for
their turn
True/False
Question
Inspection order is must even for simple jobs which can be
inspected by shop inspector with the tooling available on shop.
Correct Answer False
Your Answer
False
Multiple Choice Multiple Answer
Question
Order preparation process for products manufatured to order
requires following documents
Correct Answer Sales Order , Work order , Shop order
Your Answer
Sales Order , Work order , Purchase order
Multiple Choice Single Answer
Question
Technique of Value Engineering can be effectively employed in
design of a product to
Correct Answer To meet the intended function at lowest cost
Your Answer
Reduce lead time
True/False
Question
Cent percent inspection is often more practical and economical
than sampling inspection.
Correct Answer False
Your Answer
False
Multiple Choice Multiple Answer
Question
Scale model used for layout analysis have following advantages
Correct Answer Nontechnical person finds it easy to comprehend , Ovehead
facilities can be shown , Models can be shifted easily
Your Answer
Nontechnical person finds it easy to comprehend , Ovehead
facilities can be shown , Models can be shifted easily
Multiple Choice Single Answer
Question
Which of the following technique is event oriented ?
Correct Answer Project Evaluation & Review Technique
Your Answer
Project Evaluation & Review Technique
Multiple Choice Single Answer
Question
What is the meaning of " Product features" according to
J.M.Juran?
Correct Answer Quality of design
Your Answer
Quality of design
Match The Following
Question
Correct Answer
Your Answer
Crash cost of an activity
Cc
Cc
Normal time of an activity Tn
Tn
Crash time of activity
Tc
Tc
Normal cost of an activity Cn
Cn
Multiple Choice Multiple Answer
Question
What are uses of diagrams in method study?
Correct Answer Study different plant layouts and select the most optimum one ,
Study the extent of traffic over the different routes of the plant ,
Identify the extent of backtracking, cross traffic and obstacles
encountered during the movement of material.
Your Answer
Study different plant layouts and select the most optimum one ,
Study the extent of traffic over the different routes of the plant ,
Identify the extent of backtracking, cross traffic and obstacles
encountered during the movement of material.
True/False
Question
A load chart specifies the work to be carried out by each person
of company during shift hours.
Correct Answer False
Your Answer
True
Multiple Choice Multiple Answer
Question
Route Sheet generally contains following information
Correct Answer Material Specification , Sequence of operation , Skill of Labour
Your Answer
Material Specification , Sequence of operation , Skill of Labour
True/False
Question
Cellular layout is based on the concept of Group Technology
Correct Answer True
Your Answer
True
Multiple Choice Single Answer
Question
Which varaible is taken along the abscissa or X axis?
Correct Answer Time
Your Answer
Standard deviation
Multiple Choice Multiple Answer
Question
Which are the advantages of suburban location?
Correct Answer Avaialability of adequate land at lower cost , Both skilled and
unskilled labour can be available , Plant expansion is easier due
to less or no restriction for building and construction
Your Answer
Avaialability of adequate land at lower cost , Both skilled and
unskilled labour can be available , Plant expansion is easier due
to less or no restriction for building and construction
Select The Blank
Question
The ________ is the maintenance work initiated on a result of
knowledge of the condition of an item from routine or continuous
checking.
Correct Answer Condition monitoring
Your Answer
Condition monitoring
Multiple Choice Multiple Answer
Question
Expediting function is concerned with following activities
Correct Answer Progress chasing to identify delays which may hold up
production , Communicating possible delays in delivery date
commitment to sales department , Devising cures to keep rate of
production in line with schedule
Your Answer
Recording progress of work , Progress chasing to identify delays
which may hold up production , Communicating possible delays
in delivery date commitment to sales department
Select The Blank
Question
Production control work is ________ in case of floor inspection
as compared with the centralised inspection.
Correct Answer easier
Your Answer
time consuming
Select The Blank
Question
The easiest way to bring the delayed job within the promised
delivery time by using extra shift or weekly holiday is ________.
Correct Answer Overtime working
Your Answer
Overtime working
True/False
Question
In case of forward pass computation, the earliest event time of
the first event is zero.
Correct Answer True
Your Answer
True
Multiple Choice Single Answer
Question
What is represented by an arrow in a network?
Correct Answer Activity
Your Answer
Activity
True/False
Question
As a general rule, a site five times the actual plant size is
considered minimum for parking, access facilities and future
expansion.
Correct Answer True
Your Answer
True
True/False
Question
Independent float either affects the float of preceding activities or
that of succeeding activities.
Correct Answer False
Your Answer
False
Multiple Choice Single Answer
Question
The document raised by PPC which authorises different
functions to take action as per instruction is called
Correct Answer Work Order
Your Answer
Work Order
Multiple Choice Single Answer
Question
A good layout makes effective use of space. Utilization of space
for a department like Stores can be measured by
Correct Answer Proportion of Cubic volume space utilized
Your Answer
Ratio of area utilised to area available
Multiple Choice Single Answer
Question
The process of changing inputs into outputs thereby adding
some value to entity can be defined as
Correct Answer Operation
Your Answer
Operation