LIST OF ATTEMPTED QUESTIONS AND ANSWERS
Multiple Choice Single Answer
Question
Which phase of method study is concerned with analyzing the
facts critically, generating alternatives which form the basis for
selection and development of improved methods?
Correct Answer Critical examination
Your Answer
Development and selection
Select The Blank
Question
The ________ advocates maintenance procedures whereby the
condition of the plant is constantly watched through systematic
inspection to unearth unhealthy conditions and preventive
Correct Answer Preventive Maintenance
Your Answer
Design-in Maintenance
Select The Blank
Question
The term ________ emplies the foregone profit due to inability of
company to produce.
Correct Answer Opportunity cost
Your Answer
Down time cost
True/False
Question
A network should employ only those dummy activities which are
absolutely necessary.
Correct Answer True
Your Answer
True
Select The Blank
Question
A set of activities to keep an equipment in the specified condition
is called as ________.
Correct Answer Maintenance
Your Answer
Maintenance
True/False
Question
While making X bar-R-chart, values of X bar and R are recoded
samplewise either on the extreme right of the individual
measurements on the data sheet or in a separate sheet.
Correct Answer True
Your Answer
False
Select The Blank
Question
The ________ must ensure that the product satisfy the
functional requirements of it's usage.
Correct Answer Quality of design
Your Answer
Quality of inspection
True/False
Question
Even if any activity on the critical path is delayed, project
completes on the scheduled time.
Correct Answer False
Your Answer
False
Multiple Choice Single Answer
Question
Which is the alternative way of indicating the load other than
numerical way, in case of Gantt chart ?
Correct Answer Graphical approach
Your Answer
Symbolic pproach
Multiple Choice Multiple Answer
Question
Which of the following are types of sampling plan?
Correct Answer Single sampling plan , Double sampling plan , Multiple sampling
plan
Your Answer
Single sampling plan , Double sampling plan , Multiple sampling
plan
Multiple Choice Multiple Answer
Question
Which of the following are major inputs to scheduling?
Correct Answer Overlapping of operations , Effective Capacity per work centre ,
Performance standards
Your Answer
Overlapping of operations , Effective Capacity per work centre ,
Performance standards
Select The Blank
Question
The ________ is necessary when the job requires detailed of
one or more of the job characteristics with the help of special
equipment which is not available at the producing company.
Correct Answer Inspection order
Your Answer
Stores issue order
Select The Blank
Question
The ________ is the maintenance work initiated on a result of
knowledge of the condition of an item from routine or continuous
checking.
Correct Answer Condition monitoring
Your Answer
Condition monitoring
True/False
Question
Diversified labour is adequately available in rural area as
compared to urban area.
Correct Answer False
Your Answer
False
Multiple Choice Multiple Answer
Question
Which of the following cases indicated that the operation has
occurred?
Correct Answer Movement of components to assembly section , Raw material
movement , A worker's trip to grinder to sharpen the tools
Your Answer
Movement of components to assembly section , A worker's trip
to grinder to sharpen the tools , Tools kept in rack of tool crib
Multiple Choice Single Answer
Question
What is the reason of fluctuations, if the control chart evaluates
that the process is in a state of statistical control?
Correct Answer Random variability
Your Answer
Set up variability
Select The Blank
Question
The ________ is the maximum percentage defective that for the
purpose of sampling inspection can be considered satisfactory
as a process average.
Correct Answer Acceptable quality level
Your Answer
Acceptable quality level
Multiple Choice Single Answer
Question
Product layout is suitable when
Correct Answer Products have reasonable stable demand
Your Answer
Products are not required in large quantities
Multiple Choice Multiple Answer
Question
Which of the following charts are used for the recording of data
during the method study?
Correct Answer Operation process chart , Multiple activity chart , Flow process
chart
Your Answer
Operation process chart , Multiple activity chart , Flow process
chart
True/False
Question
The operator should not stop production if first piece is not
approved by the inspector.
Correct Answer False
Your Answer
False
Multiple Choice Single Answer
Question
Need for change in layout can occur due to following reason
Correct Answer introduction of new product
Your Answer
introduction of new product
Multiple Choice Single Answer
Question
What do you mean by a single event which represents the joint
completion of more than one activities?
Correct Answer Merge event
Your Answer
Merge event
True/False
Question
The control chart for number of defectives is more convenient to
make than control chart for fraction defectives sincethe fugure of
number of defectives units can be directly taken from the
inspection report.
Correct Answer True
Your Answer
True
Multiple Choice Single Answer
Question
Which rule is used for numbering of events?
Correct Answer Fulkerson's Rule
Your Answer
Juran's Rule
True/False
Question
In case of two handed process chart, the simultaneous activities
of both hands are recorded opposite to each other on the chart.
Correct Answer True
Your Answer
True/False
Question
True
All activities lying on the non-critical paths must have total float
and free float.
Correct Answer False
Your Answer
True
Multiple Choice Multiple Answer
Question
Which of the following is not the characteristic of Project
Production?
Correct Answer Continuous flow of material , Highly mechanised material
handling , Virtually zero manufacturing cycle time
Your Answer
Continuous flow of material , Highly mechanised material
handling , Virtually zero manufacturing cycle time
Multiple Choice Multiple Answer
Question
Which of the following is not the characteristic of Project
Production?
Correct Answer Continuous flow of material , Highly mechanised material
handling , Virtually zero manufacturing cycle time
Your Answer
Fixed position layout
Select The Blank
Question
The ________ are the definitions of the measurable as well as
nonmeasurable characteristics of the product.
Correct Answer Specifications
Your Answer
Specifications
Multiple Choice Single Answer
Question
How industry has responded to the fact of existence of inherant
variability of the manufacturing process?
Correct Answer Inclusion of certain tolerance on the basic dimensions in the
drawing
Your Answer
Inclusion of certain tolerance on the basic dimensions in the
drawing
Select The Blank
Question
Work study is also called ________ study
Correct Answer Time and Motion
Your Answer
Time and Motion
Multiple Choice Multiple Answer
Question
Which are the different methods of recording actual progress of
work?
Correct Answer Display boards , Progress cards , Network updating
Your Answer
True/False
Question
Job cards , Progress cards , Network updating
In case of backward pass computation, the latest event time of
the end event equals to the earliest event time minus duration of
that activity.
Correct Answer False
Your Answer
True
Multiple Choice Multiple Answer
Question
Which of the following products should be produced by using
mass production?
Correct Answer Refrigerator , Tyre for automobile , Television Set
Your Answer
Refrigerator , Tyre for automobile , Television Set
Multiple Choice Multiple Answer
Question
Which of the following are examples of attributes?
Correct Answer Cracks , Burrs , Texture
Your Answer
Cracks , Burrs , Texture
Match The Following
Question
Correct Answer
Your Answer
Scheduling Device
Strings
Strings
Interruption for machine
utilisation
Preventive maintenance
Preventive maintenance
Input for scheduling
Overlapping of operations Critical Path Analysis
Technique of scheduling
Critical Path Analysis
JIT
Multiple Choice Multiple Answer
Question
Which are the three distinct parts of the chart?
Correct Answer Summary , Introduction , Body
Your Answer
Summary , Introduction , Analysis
Match The Following
Question
Correct Answer
Your Answer
Combined Layout
Mixed Layout
Mixed Layout
Fixed Position Layout
Project Layout
Project Layout
Product Layout
Line Layout
Line Layout
Process Layout
Functional Layout
Functional Layout
Multiple Choice Multiple Answer
Question
Following are the commonly used factors considered for
evaluation of layout in factor analysis method
Correct Answer Flow of material , Equipment utilization , Working condition
Your Answer
Flow of material , Equipment utilization , Working condition
Multiple Choice Single Answer
Question
Fixed position layout is adopted when
Correct Answer product is very heavy involving assembly of large number of
parts
Your Answer
product is very heavy involving assembly of large number of
parts
Select The Blank
Question
The ________ is the defect level for which lots are regarded as
bad lots.
Correct Answer Lot Tolerance Percentage Defective
Your Answer
Acceptable quality level
Multiple Choice Multiple Answer
Question
Which of the following are examples of specifications?
Correct Answer Commercial standards , Assembly and testing instructions , Bill
of material
Your Answer
Commercial standards , Assembly and testing instructions , Bill
of material
Multiple Choice Single Answer
Question
Process Engineer does not get sufficient time for designing
tooling for most economic production run when
Correct Answer Delivery time is less
Your Answer
Delivery time is less
Multiple Choice Single Answer
Question
What do you mean by the graphical representation of the project
which is composed as series of connected arrows and circles to
describe the interrelationship of the activities involved?
Correct Answer Network
Your Answer
True/False
Flow chart
Question
Latest finishing date is the latest event time of the tail event.
Correct Answer False
Your Answer
True
Multiple Choice Single Answer
Question
Any premise in which persons are employed for purpose of
making any product/s is called
Correct Answer Factory
Your Answer
Factory
Select The Blank
Question
The ________ is the probability that a bad lot will be accepted by
the sampling plan.
Correct Answer Consumer's risk
Your Answer
Consumer's risk