ISO Update
Supplement to ISOfocus
January 2015
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step
towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO
technical committee. When consensus has been reached within the technical committee, the document is sent to the
Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 %
of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International
Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 December to 31 December 2014
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
PC 286
Collaborative business relationship management -Framework
ISO/CD 11000
Collaborative business relationship management — Framework
TC 20
Aircraft and space vehicles
ISO/CD 19683
Space systems — Design qualification and acceptance tests of small-scale satellite and units
seeking low-cost and fast-delivery
TC 22
Road vehicles
ISO/CD 11898-2
Road vehicles — Controller area network (CAN) — Part 2: High-speed medium access unit
TC 23
Tractors and machinery for agriculture and forestry
ISO/DTS 19858
Forestry machines — Portable chain-saws — Test method for evaluating saw chain oil
lubricity
TC 34
Food products
ISO 2256:1984/CD
Amd 1
Dried mint (spearmint) (Mentha spicata Linnaeus syn. Mentha viridis Linnaeus) —
Specification — Amendment 1
ISO 6571:2008/CD
Amd 1
Spices, condiments and herbs — Determination of volatile oil content (hydrodistillation
method) — Amendment 1
ISO/DTR 17622
Molecular biomarker analysis — SSR analysis of sunflower
TC 39
Machine tools
ISO/CD 14955-2
Machine tools - Environmental evaluation of machine tools — Part 2: Methods for measuring
energy supplied to machine tools and machine tool components
ISO/CD 19085-6
Woodworking machines — Safety — Part 6: Single spindle vertical moulding machines
(“toupie”)
ISO/CD 19085-7
Woodworking machines — Safety — Part 7: Surface, thicknessing, combined
surface/thicknessing planing
machines
TC 58
Gas cylinders
ISO/CD 10156
Gases and gas mixtures — Determination of fire potential and oxidizing ability for the
selection of cylinder valve outlets
TC 61
Plastics
ISO/CD 4589-1
Plastics — Determination of burning behaviour by oxygen index — Part 1: Guidance
ISO/CD 4589-2
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambienttemperature test
ISO/CD 4589-3
Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevatedtemperature test
TC 69
Applications of statistical methods
ISO/CD 22514-5
Statistical methods in process management — Capability and performance — Part 5:
Process capability estimates and performance for attributive characteristics
TC 71
Concrete, reinforced concrete and pre-stressed concrete
ISO/CD 1920-2
Testing of concrete — Part 2: Properties of fresh concrete
TC 92
Fire safety
ISO/CD 12828-2
Validation methods for fire gas analyses — Part 2: Validation of quantification method
TC 94
Personal safety -- Protective clothing and equipment
ISO/CD 11613
Protective clothing for firefighters — Laboratory test methods and performance requirements
ISO/CD 18639-1
PPE ensembles for firefighters undertaking specialist rescue activities — Part 1: General
ISO/CD 18639-2
PPE ensembles for firefighters undertaking specialist rescue activities — Part 2:
Compatibility
ISO/CD 18639-3
PPE ensembles for firefighters undertaking specialist rescue activities — Part 3: Clothing
ISO/CD 18639-4
PPE ensembles for firefighters undertaking specialist rescue activities — Part 4: Gloves
ISO/CD 18639-5
PPE ensembles for firefighters undertaking specialist rescue activities — Part 5: Helmet
ISO/CD 18640-1
Protective clothing for fire-fighters- physiological impact — Part 1: Measurement of coupled
heat and mass transfer with the sweating TORSO
ISO/CD 18640-2
Protective clothing for fire-fighters- physiological impact — Part 2: Determination of
physiological heat load caused by protective clothing worn by fire-fighters
TC 106
Dentistry
ISO
20126:2012/CD
Amd 1
Dentistry — Manual toothbrushes — General requirements and test methods — Amendment
1
ISO/DTS 22911
Dentistry — Preclinical evaluation of dental implant systems — Animal test methods
TC 108
Mechanical vibration, shock and condition monitoring
ISO 202833:2006/CD Amd 1
Mechanical vibration — Measurement of vibration on ships — Part 3: Pre-installation
vibration measurement of shipboard equipment — Amendment 1
ISO/CD 20283-5
Mechanical vibration — Measurement of vibration on ships — Part 5: Measurement,
evaluation and reporting of vibration with regard to habitability on passenger and merchant
ships
ISO/CD 29821-2
Condition monitoring and diagnostics of machines — Ultrasound — Part 2: Procedures and
validation
TC 113
Hydrometry
ISO/CD 9123
Measurement of liquid flow in open channels — Stage-fall-discharge relationships
TC 120
Leather
ISO/CD 15115
Leather — Vocabulary
TC 159
Ergonomics
ISO/CD 9241-11
Ergonomics of human-system interaction — Part 11: Usability: Definitions and concepts
ISO/CD 9241-112
Ergonomics of human-system interaction — Part 112: Principles and general guidance for
the presentation of information
ISO/CD 9241-125
Ergonomics of human-system interaction — Part 125: Guidance on visual presentation of
information
TC 163
Thermal performance and energy use in the built
environment
ISO/CD 52003-1
Energy performance of buildings — Indicators, requirements and certification — Part 1:
General aspects and application to the overall energy performance
TC 172
Optics and photonics
ISO/CD 10110-17
Optics and photonics — Preparation of drawings for optical elements and systems — Part
17: Laser irradiation damage threshold
TC 178
Lifts, escalators and moving walks
ISO/DTR 14799-1
Comparison of worldwide escalator and moving walk safety standards — Part 1: Rule by rule
comparison
ISO/DTR 14799-2
Comparison of worldwide escalator and moving walk safety standards — Part 2: Abbreviated
comparison and comments
TC 190
Soil quality
ISO/CD TR 19588
Background information and guidance on environmental cyanide analysis
ISO/CD 20131-1
Soil quality — Simple laboratory assessments for characterizing the denitrification in soil —
Part 1: Soil denitrifying enzymes activities
ISO/CD 20131-2
Soil quality — Simple laboratory assessments for characterizing the denitrification in soil —
Part 2: Assessment of the capacity of soils to reduce N2O
TC 204
Intelligent transport systems
ISO/CD 14817-3
Intelligent transport systems — ITS central data registry and data dictionaries — Part 3:
Object identifier assignments for ITS data concepts
ISO/CD 18682
Intelligent transport systems — External hazard detection and notification systems — Basic
requirements
ISO/DTR 19639
Electronic fee collection — Investigation of EFC standards for common payment schemes for
multi-modal transport services
ISO/CD TR 20545
Intelligent transport systems — Vehicle/roadway warning and control systems — Report on
standardisation for vehicle automated driving systems (RoVAS)/Beyond driver assistance
systems
TC 211
Geographic information/Geomatics
ISO/CD 19160-4
Addressing — Part 4: International postal address components and template languages
TC 219
Floor coverings
ISO/CD 19322
Resilient floor coverings — Specification for floor coverings based on synthetic thermoplastic
polymer
TC 228
Tourism and related services
ISO/CD 11121
Recreational diving services — Requirements for introductory training programmes to scuba
diving
ISO/CD 24803
Recreational diving services — Requirements for recreational scuba diving service providers
TC 238
Solid biofuels
ISO/CD 18125
Solid biofuels — Determination of calorific value
ISO/CD 18847
Solid biofuels — Determination of particle density
TC 282
Water re-use
ISO/CD 20426
Risk and performance evaluation of water re-use systems — Guidelines for health risk
assessment and treatment for water re-use
TC 292
Security (official starting date=2015-01-01)
ISO/DTS 22317
Societal security — Business continuity management systems — Business impact analysis
(BIA)
JTC 1
Information technology
ISO/IEC CD 14651
Information technology — International string ordering and comparison — Method for
comparing character strings and description of the common template tailorable ordering
ISO/IEC CD 781611
Identification cards — Integrated circuit cards — Part 11: Personal verification through
biometric methods
ISO/IEC CD 19286
Identification cards — Integrated circuit cards — ICC protocols and services ensuring privacy
ISO/IEC PDTS
19841
C++ Extensions for Transactional Memory
ISO/IEC CD 301002
Information technology — Home network resource management — Part 2:
ISO/IEC CD 10116
Information technology — Security techniques — Modes of operation for an n-bit block cipher
ISO/IEC CD 148883
Information technology — Security techniques — Digital signatures with appendix — Part 3:
Discrete logarithm based mechanisms
ISO/IEC CD 159461
Information technology — Security techniques — Cryptographic techniques based on elliptic
curves — Part 1: General
ISO/IEC CD 18367
Cryptographic algorithms and security mechanisms conformance testing
ISO/IEC CD 200094
Information technology — Security techniques — Anonymous entity authentication — Part 4:
Mechanisms based on weak secrets
ISO/IEC CD 27003
Information technology — Security techniques — Information security management system
implementation guidance
ISO/IEC CD 27004
Information technology — Security techniques — Information security management —
Measurement
ISO/IEC 230014:2014/PDAM 1
Information technology — MPEG systems technologies — Part 4: Codec configuration
representation — Amendment 1: Parser Instantiation from BSD
ISO/IEC 230085/PDAM 1
Information technology — High efficiency coding and media delivery in heterogeneous
environments — Part 5: HEVC Conformance testing and reference software — Amendment
1: Reference software for format range extensions profiles
ISO/IEC 230085/PDAM 2
Information technology — High efficiency coding and media delivery in heterogeneous
environments — Part 5: HEVC Conformance testing and reference software — Amendment
2: Reference Software for the Multiview Main Profile of HEVC
ISO/IEC 230088/PDAM 1
Information technology — High efficiency coding and media delivery in heterogeneous
environments — Part 8: Conformance Specification for HEVC — Amendment 1:
Conformance testing for Multiview Main and 3D Main Profiles of HEVC
DIS circulated
Period from 01 December to 31 December 2014
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote
terminates
PC 272
Forensic sciences
ISO/DIS 18385.2
Minimizing the risk of human DNA contamination in products used to collect,
store and analyze biological material for forensic purposes
PC 284
Management system for private security
operations - Requirements with guidance
ISO/DIS 18788
*
TC 8
Management system for private security operations — Requirements with
guidance
Ships and marine technology
ISO/DIS 17939
*
Ships and marine technology — Oil tank hatches
ISO/DIS 17940
*
Ships and marine technology — Hinged watertight doors
TC 20
Aircraft and space vehicles
2015-03-06
2015-03-11
ISO/DIS 17761
*
TC 21
ISO/DIS 14520-1
Space environment (natural and artificial) — Model of high energy radiation
at low altitudes (300-600 km)
2015-03-05
Equipment for fire protection and fire fighting
*
Gaseous fire-extinguishing systems — Physical properties and system
design — Part 1: General requirements
2015-03-09
(Revision of ISO/TS 20885:2003, ISO 14520-1:2006, ISO 14520-1:2006/Cor
1:2007)
TC 22
ISO/DIS 18246
Road vehicles
*
TC 34
Electrically propelled mopeds and motorcycles — Safety requirements for
conductive connection to an external electric power supply
2015-02-18
Food products
ISO/DIS 12824
*
Royal jelly — Specifications
2015-03-16
ISO
5985:2002/DAmd 1
*
Animal feeding stuffs — Determination of ash insoluble in hydrochloric acid
— Amendment 1
2015-03-05
ISO/DIS 13904
*
Animal feeding stuffs — Determination of tryptophan content
2015-05-05
(Revision of ISO 13904:2005)
TC 35
ISO/DIS 4629-1
Paints and varnishes
*
Binders for paints and varnishes — Determination of hydroxyl value —
Titrimetric method — Part 1: Titrimetric method without using a catalyst
2015-05-19
(Revision of ISO 4629:1996)
ISO/DIS 4629-2
*
TC 39
ISO/DIS 3070-2
Binders for paints and varnishes — Determination of hydroxyl value — Part
2: Titrimetric method using a catalyst
2015-05-19
Machine tools
*
Machine tools — Test conditions for testing the accuracy of boring and
milling machines with horizontal spindle — Part 2: Machines with movable
column along the X-axis (floor type)
2015-03-21
(Revision of ISO 3070-2:2007)
TC 43
ISO/DIS 4869-2
Acoustics
*
Acoustics — Hearing protectors — Part 2: Estimation of effective Aweighted sound pressure levels when hearing protectors are worn
2015-05-05
(Revision of ISO 4869-2:1994, ISO 4869-2:1994/Cor 1:2006)
ISO/DIS 10140-1
*
Acoustics — Laboratory measurement of sound insulation of building
elements — Part 1: Application rules for specific products
2015-05-05
(Revision of ISO 10140-1:2010, ISO 10140-1:2010/Amd 1:2012, ISO
10140-1:2010/Amd 2:2014)
TC 44
Welding and allied processes
ISO/DIS 6848.2
Arc welding and cutting — Nonconsumable tungsten electrodes —
2015-02-05
Classification
(Revision of ISO 6848:2004)
ISO/DIS 15614-7.2
*
Specification and qualification of welding procedures for metallic materials
— Welding procedure test — Part 7: Overlay welding
2015-01-28
(Revision of ISO 15614-7:2007)
TC 46
ISO/DIS 7098
Information and documentation
*
Information and documentation — Romanization of Chinese
(Revision of ISO 7098:1991)
TC 59
Buildings and civil engineering works
ISO/DIS 19861
*
Buildings and civil engineering works — Sealants — Determination of curing
behavior
ISO/DIS 19862
*
Buildings and civil engineering works — Sealants — Durability to extension
compression cycling under accelerated weathering
ISO/DIS 19863
*
Buildings and civil engineering works — Sealants — Determination of tear
resistance
TC 69
ISO/DIS 22514-4
Applications of statistical methods
*
Statistical methods in process management — Capability and performance
— Part 4: Process capability estimates and performance measures
2015-03-09
(Revision of ISO/TR 22514-4:2007)
ISO/DIS 18404
*
TC 72
ISO/DIS 11111-1
Quantitative methods in process improvement — Six Sigma —
Competencies for key personnel and their organisation in relation to Six
Sigma and Lean implementation
2015-03-11
Textile machinery and accessories
*
Textile machinery — Safety requirements — Part 1: Common requirements
2015-05-05
(Revision of ISO 11111-1:2009)
ISO 111112:2005/DAmd 2
*
Textile machinery — Safety requirements — Part 2: Spinning preparatory
and spinning machines — Amendment 2
2015-05-05
ISO 111113:2005/DAmd 2
*
Textile machinery — Safety requirements — Part 3: Nonwoven machinery
— Amendment 2
2015-05-05
ISO 111114:2005/DAmd 2
*
Textile machinery — Safety requirements — Part 4: Yarn processing,
cordage and rope manufacturing machinery — Amendment 2
2015-05-05
ISO 111115:2005/DAmd 2
*
Textile machinery — Safety requirements — Part 5: Preparatory machinery
to weaving and knitting — Amendment 2
2015-05-05
ISO 111116:2005/DAmd 2
*
Textile machinery — Safety requirements — Part 6: Fabric manufacturing
machinery — Amendment 2
2015-05-05
ISO 111117:2005/DAmd 2
*
Textile machinery — Safety requirements — Part 7: Dyeing and finishing
machinery — Amendment 2
2015-05-05
TC 81
Common names for pesticides and other
agrochemicals
ISO
1750:1981/DAmd 6
*
TC 83
ISO/DIS 20187
Sports and other recreational facilities and
equipment
*
TC 84
ISO/DIS 7864
Pesticides and other agrochemicals — Common names — Amendment 6:
Meptyldinocap
Inflatable play equipment — Safety requirements and test methods
2015-03-05
Devices for administration of medicinal products
and catheters
*
Sterile hypodermic needles for single use — Requirements and test
methods
2015-05-05
(Revision of ISO 7864:1993)
TC 85
ISO/DIS 19017
Nuclear energy, nuclear technologies, and
radiological protection
*
TC 87
ISO/DIS 10718
Guide for gamma spectrometry measurement of radioactive waste
Cork
*
Cork stoppers — Characterization of a low in germ stopper, through the
enumeration of colony-forming units of yeasts, moulds and bacteria,
capable of both, being extracted and growing in alcoholic medium
(Revision of ISO 10718:2002)
TC 96
ISO/DIS 9926-3
Cranes
*
Cranes — Training of operators — Part 3: Tower cranes
2015-03-05
(Revision of ISO 9926-3:2005)
TC 104
ISO/DIS 9897-5
Freight containers
*
Freight containers — Container equipment data exchange (CEDEX) — Part
5: General communication codes for chassis
2015-03-09
(Revision of ISO 9897:1997, ISO 9897:1997/Cor 1:2001)
TC 106
ISO/DIS 18556
Dentistry
*
TC 108
ISO
8727:1997/DAmd 1
2015-05-19
Mechanical vibration, shock and condition
monitoring
*
TC 110
ISO/DIS 10896-6
Dentistry — Intraoral spatulas
Mechanical vibration and shock — Human exposure — Biodynamic
coordinate systems — Amendment 1
2015-03-17
Industrial trucks
*
Rough-terrain trucks — Safety requirements and verification — Part 6:
Tilting operator's cabs
2015-03-09
ISO/DIS 11525-2.2
*
TC 133
ISO/DIS 8559-2
Rough-terrain trucks — User requirements — Part 2: Slewing variable-reach
trucks
2015-02-11
Clothing sizing systems - size designation, size
measurement methods and digital fittings
*
TC 134
Size designation of clothes — Part 2: Primary and secondary dimension
indicators
2015-03-21
Fertilizers and soil conditioners
ISO/DIS 14820-1
*
Fertilizers and liming materials — Sampling and sample preparation — Part
1: Sampling
2015-03-05
ISO/DIS 14820-2
*
Fertilizers and liming materials — Sampling and sample preparation — Part
2: Sample preparation
2015-03-05
ISO/DIS 15604
*
Fertilizers — Determination of different forms of nitrogen in the same
sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide
nitrogen
2015-03-05
ISO/DIS 15958
*
Fertilizers — Extraction of water soluble phosphorus
2015-03-05
ISO/DIS 15959
*
Fertilizers — Determination of extracted phosphorus
2015-03-05
ISO/DIS 15960
*
Fertilizers — Extraction of total calcium, total magnesium, total sodium and
total sulfur in the forms of sulfates
2015-03-05
ISO/DIS 18642
*
Fertilizer and soil conditioners — Fertilizer grade Urea — General
requirements
2015-03-23
ISO/DIS 18643
*
Fertilizers and soil conditioners — Determination of biuret content of ureabased fertilizers — HPLC method
2015-03-23
ISO/DIS 18644
*
Fertilizers and soil conditioners — Controlled release fertilizer — General
requirements
2015-03-23
ISO/DIS 18645
*
Fertilizers and soil conditioners — Water soluble compound fertilizer —
General requirements
2015-03-23
ISO/DIS 25475
*
Fertilizers — Determination of ammoniacal nitrogen
2015-03-05
ISO/DIS 25705
*
Fertilizers — Determination of urea condensates using high-performance
liquid chromatography (HPLC) — Isobutylidenediurea and
crotonylidenediurea (method A) and methylen-urea oligomers (method B)
2015-03-05
ISO/DIS 25749
*
Fertilizers — Determination of sulfates content using three different methods
2015-03-05
TC 163
ISO/DIS 12572
Thermal performance and energy use in the built
environment
*
Hygrothermal performance of building materials and products —
Determination of water vapour transmission properties
2015-05-05
(Revision of ISO 12572:2001)
ISO/DIS 17738-1
*
TC 172
ISO/DIS 14880-1
Thermal insulation products — Exterior insulation and finish systems — Part
1: Materials and systems
2015-03-09
Optics and photonics
*
Optics and photonics — Microlens arrays — Part 1: Vocabulary
2015-05-05
(Revision of ISO 14880-1:2001, ISO 14880-1:2001/Cor 1:2003, ISO 148801:2001/Cor 2:2005)
TC 182
ISO/DIS 17892-5
Geotechnics
*
Geotechnical investigation and testing — Laboratory testing of soil — Part
5: Incremental loading oedometer test
2015-05-19
(Revision of ISO/TS 17892-5:2004, ISO/TS 17892-5:2004/Cor 1:2006)
ISO/DIS 17892-6
*
Geotechnical investigation and testing — Laboratory testing of soil — Part
6: Fall cone test
2015-05-19
(Revision of ISO/TS 17892-6:2004, ISO/TS 17892-6:2004/Cor 1:2006)
TC 188
ISO/DIS 15085
Small craft
*
Small craft — Man-overboard prevention and recovery
2015-05-05
(Revision of ISO 15085:2003, ISO 15085:2003/Amd 1:2009)
TC 190
Soil quality
ISO/DIS 18400-101
*
Soil quality — Sampling — Part 101: Framework for the preparation and
application of a sampling plan
2015-03-05
ISO/DIS 18400-102
*
Soil quality — Sampling — Part 102: Selection and application of sampling
techniques
2015-03-05
ISO/DIS 18400-103
*
Soil quality — Sampling — Part 103: Safety
2015-03-05
ISO/DIS 18400-105
*
Soil quality — Sampling — Part 105: Packaging, transport, storage and
preservation of samples
2015-03-05
ISO/DIS 18400-106
*
Soil quality — Sampling — Part 106: Quality control and quality assurance
2015-03-05
ISO/DIS 18400-107
*
Soil quality — Sampling — Part 107: Recording and reporting
2015-03-05
ISO/DIS 18400-201
*
Soil quality — Sampling — Part 201: Physical pretreatment in the field
2015-03-05
TC 204
ISO/DIS 14813-1.2
Intelligent transport systems
*
Intelligent transport systems — Reference model architecture(s) for the ITS
sector — Part 1: ITS service domains, service groups and services
(Revision of ISO 14813-1:2007)
TC 206
ISO/DIS 17841
Fine ceramics
*
TC 219
ISO/DIS 18168
2015-03-21
Floor coverings
*
TC 220
ISO/DIS 21028-2
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test
method for thermal fatigue of fine ceramics substrate
Textile floor coverings — Colour fastness to shampooing
2015-03-17
Cryogenic vessels
*
Cryogenic vessels — Toughness requirements for materials at cryogenic
temperature — Part 2: Temperatures between -80 degrees C and -20
degrees C
2015-05-19
(Revision of ISO 21028-2:2004)
JTC 1
ISO/IEC DIS 2934112-1
Information technology
*
Information technology — UPnP Device Architecture — Part 12-1: Remote
User Interface Device Control Protocol - Remote User Interface Client
Device
2015-03-05
(Revision of ISO/IEC 29341-12-1:2008)
ISO/IEC DIS 2934112-2
*
Information technology — UPnP Device Architecture — Part 12-2: Remote
User Interface Device Control Protocol — Remote User Interface Server
Device
2015-03-05
(Revision of ISO/IEC 29341-12-2:2008)
ISO/IEC DIS 293413-10
*
Information technology — UPnP Device Architecture — Part 3-10: Audio
Video Device Control Protocol — Audio Video Transport Service
2015-03-05
(Revision of ISO/IEC 29341-3-10:2008)
ISO/IEC DIS 293417-11
*
Information technology — UPnP Device Architecture — Part 7-11: Lighting
Device Control Protocol — Switch Power Service
2015-03-05
(Revision of ISO/IEC 29341-7-11:2008)
ISO/IEC DIS 2934112-10
*
Information technology — UPnP Device Architecture — Part 12-10: Remote
User Interface Device Control Protocol — Remote User Interface Client
Service
2015-03-05
(Revision of ISO/IEC 29341-12-10:2008)
ISO/IEC DIS 2934112-11
*
Information technology — UPnP Device Architecture — Part 12-11: Remote
User Interface Device Control Protocol - Remote User Interface Server
Service
2015-03-05
(Revision of ISO/IEC 29341-12-11:2008)
ISO/IEC DIS 15026-3
*
Systems and software engineering — Systems and software assurance —
Part 3: System integrity levels
2015-03-21
(Revision of ISO/IEC 15026-3:2011)
ISO/IEC DIS 7816-15
*
Identification cards — Integrated circuit cards — Part 15: Cryptographic
information application
(Revision of ISO/IEC 7816-15:2004, ISO/IEC 7816-15:2004/Amd 1:2007,
ISO/IEC 7816-15:2004/Cor 1:2004, ISO/IEC 7816-15:2004/Amd 2:2008)
ISO/IEC DIS 11694-3
*
Identification cards — Optical memory cards — Linear recording method —
Part 3: Optical properties and characteristics
(Revision of ISO/IEC 11694-3:2008)
ISO/IEC DIS 17825
*
Information technology — Security technique — Testing methods for the
mtigation of non-invasive attack classes against cryptographic modules
ISO/IEC 144965:2001/DAmd 36
*
Information technology — Coding of audio-visual objects — Part 5:
Reference software — Amendment 36: Pattern-based 3D mesh coding
reference software
2015-03-17
ISO/IEC 1449627:2009/DAmd 6
*
Information technology — Coding of audio-visual objects — Part 27: 3D
Graphics conformance — Amendment 6: Pattern-based 3D mesh coding
conformance
2015-03-17
ISO/IEC DIS 19757-3
Information technology — Document Schema Definition Languages (DSDL)
— Part 3: Rule-based validation — Schematron
*
(Revision of ISO/IEC 19757-3:2006)
ISO/IEC DIS 30106-1
*
Information technology — BioAPI for object oriented programming
languages — Part 1: Architecture
2015-03-05
ISO/IEC DIS 30106-2
*
Information Technology — Object oriented BioAPI — Part 2: Java
implementation
2015-03-05
ISO/IEC DIS 30106-3
*
Information Technology — Object oriented BioAPI — Part 3: C#
implementation
2015-03-05
FDIS circulated
Period from 01 December to 31 December 2014
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the
date shown
* Available in English only
Vote
terminates
TC 6
ISO/FDIS 16260
Paper, board and pulps
*
TC 22
ISO/FDIS 15118-3
*
Road vehicles — Vehicle to grid communication interface — Part 3:
Physical and data link layer requirements
2015-02-06
Particle characterization including sieving
*
TC 27
ISO/FDIS 602
2015-02-17
Road vehicles
TC 24
ISO/FDIS 17867
Paper and board — Determination of internal bond strength
Particle size analysis — Small-angle X-ray scattering
2015-02-10
Solid mineral fuels
*
Coal — Determination of mineral matter
2015-02-10
(Revision of ISO 602:1983)
TC 28
ISO/FDIS 16861
Petroleum products and related products of
synthetic or biological origin
*
TC 37
ISO/FDIS 17100
Terminology and other language and content
resources
*
TC 44
ISO 2503:2009/FDAmd
Petroleum products — Fuels (class F) — Specifications of dimethyl ether
(DME)
Translation Services — Requirements for translation services
2015-02-19
Welding and allied processes
*
Gas welding equipment — Pressure regulators and pressure regulators
2015-02-05
1
with flow-metering devices for gas cylinders used in welding, cutting and
allied processes up to 300 bar (30 MPa) — Amendment 1
ISO 5172:2006/FDAmd
2
*
Gas welding equipment — Blowpipes for gas welding, heating and cutting
— Specifications and tests — Amendment 2
2015-02-05
ISO 7291:2010/FDAmd
1
*
Gas welding equipment — Pressure regulators for manifold systems used
in welding, cutting and allied processes up to 30 MPa (300 bar) —
Amendment 1
2015-02-05
TC 58
ISO
13341:2010/FDAmd 1
Gas cylinders
*
TC 67
ISO/FDIS 15551-1
*
Petroleum and natural gas industries — Drilling and production equipment
— Part 1: Electric submersible pump systems for artificial lift
2015-02-05
Concrete, reinforced concrete and pre-stressed
concrete
*
TC 94
ISO/FDIS 11611
2015-02-12
Materials, equipment and offshore structures
for petroleum, petrochemical and natural gas
industries
TC 71
ISO/FDIS 18319
Gas cylinders — Fitting of valves to gas cylinders — Amendment 1
Fibre-reinforced polymer (FRP) reinforcement for concrete structures —
Specifications of FRP sheets
2015-02-18
Personal safety -- Protective clothing and
equipment
*
Protective clothing for use in welding and allied processes
2015-02-19
(Revision of ISO 11611:2007)
ISO/FDIS 14116
*
Protective clothing — Protection against flame — Limited flame spread
materials, material assemblies and clothing
2015-02-19
(Revision of ISO 14116:2008, ISO 14116:2008/Cor 1:2009)
ISO/FDIS 16900-8
*
TC 96
ISO/FDIS 9942-1
Respiratory protective devices — Methods of test and test equipment —
Part 8: Measurement of RPD air flow rates of assisted filtering RPD
2015-02-16
Cranes
*
Cranes — Information labels — Part 1: General
2015-02-17
(Revision of ISO 9942-1:1994)
TC 134
Fertilizers and soil conditioners
ISO/FDIS 17322
*
Fertilizers and soil conditioners — Analytical methods for Sulfur Coated
Urea (SCU)
2015-02-18
ISO/FDIS 17323
*
Fertilizers and soil conditioners — Sulfur Coated Urea (SCU) — General
requirements
2015-02-18
TC 135
Non-destructive testing
ISO/FDIS 18490
*
TC 138
ISO/FDIS 18851
2015-02-12
Plastics pipes, fittings and valves for the
transport of fluids
*
TC 150
ISO/FDIS 16061
Non-destructive testing — Evaluation of vision acuity of NDT personnel
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP)
pipes and fittings — Test method to prove the structural design of fittings
2015-02-03
Implants for surgery
*
Instrumentation for use in association with non-active surgical implants —
General requirements
2015-02-12
(Revision of ISO 16061:2008)
TC 172
ISO/FDIS 16971
Optics and photonics
*
TC 188
Ophthalmic instruments — Optical coherence tomograph for the posterior
segment of the human eye
2015-02-09
Small craft
ISO
10240:2004/FDAmd 1
*
Small craft — Owner's manual — Amendment 1
2015-02-12
ISO/FDIS 18854
*
Small craft — Reciprocating internal combustion engines exhaust
emission measurement — Test-bed measurement of gaseous and
particulate exhaust emissions
2015-02-19
TC 210
Quality management and corresponding
general aspects for medical devices
IEC/FDIS 62366-1
Medical devices — Part 1: Application of usability engineering to medical
devices
2015-01-31
(Revision of IEC 62366:2007, IEC 62366:2007/Amd 1:2014)
ISO/FDIS 80369-20
*
TC 213
ISO/FDIS 16610-60
*
Geometrical Product Specification (GPS) — Filtration
— Part 60: Linear areal filters — Basic concepts
2015-02-12
Footwear
*
TC 226
ISO/FDIS 15379-1
2015-02-05
Dimensional and geometrical product
specifications and verification
TC 216
ISO/FDIS 10750
Small-bore connectors for liquids and gases in healthcare applications —
Part 20: Common test methods
Footwear — Test method for slide fasteners — Attachment strength of
end stops
2015-02-05
Materials for the production of primary
aluminium
*
Carbonaceous materials for the production of aluminium — Cathode block
materials — Part 1: Determination of the expansion due to sodium
penetration with application of pressure
(Revision of ISO 15379-1:2004)
2015-02-18
ISO/FDIS 15379-2
*
Carbonaceous materials for the production of aluminium — Cathode block
materials — Part 2: Determination of the expansion due to sodium
penetration without application of pressure
2015-02-18
(Revision of ISO 15379-2:2004)
JTC 1
Information technology
ISO/IEC 144965:2001/FDAmd 33
*
Information technology — Coding of audio-visual objects — Part 5:
Reference software — Amendment 33: Reference software for MVC plus
depth extension of AVC
2015-02-03
ISO/IEC FDIS 23008-2
*
Information technology — High efficiency coding and media delivery in
heterogeneous environments — Part 2: High efficiency video coding
2015-02-09
(Revision of ISO/IEC 23008-2:2013)
ISO/IEC FDIS 2300810
*
Information technology — High efficiency coding and media delivery in
heterogeneous environments — Part 10: MPEG Media Transport Forward
Error Correction (FEC) codes
2015-02-09
Standards published
New International Standards published between 01 December and 31 December 2014
* Available in English only
** French version of standard previously published in English only
Price
group
COPOLCO
ISO/IEC Guide
50:2014
Committee on consumer policy
*
PC 271
ISO 19600:2014
*
*
*
Ships and marine technology — Navigation and ship operations — Electronic
inclinometers
D
Hot-rolled steel sheet of high yield stress structural quality
B
Aircraft and space vehicles
*
TC 21
ISO 7240-8:2014
E
Steel
TC 20
ISO 15845:2014
Compliance management systems — Guidelines
Ships and marine technology
TC 17
ISO 4996:2014
F
Compliance management systems
TC 8
ISO/PAS
19697:2014
Safety aspects — Guidelines for child safety in standards and other specifications
Aircraft ground equipment - Boarding vehicle for persons with reduced mobility Functional and safety requirements
D
Equipment for fire protection and fire fighting
*
Fire detection and alarm systems — Part 8: Point-type fire detectors using a
carbon monoxide sensor in combination with a heat sensor
G
ISO 6182-12:2014
*
Fire protection — Automatic sprinkler systems — Part 12: Requirements and test
methods for grooved-end components for steel pipe systems
C
TC 23
Tractors and machinery for agriculture and forestry
ISO 16119-4:2014
Agricultural and forestry machinery — Environmental requirements for sprayers —
Part 4: Fixed and semi-mobile sprayers
D
Agricultural irrigation equipment — Irrigation valves — Part 5: Control valves
C
ISO 24631-5:2014
Radio frequency identification of animals — Part 5: Procedure for testing the
capability of RFID transceivers of reading ISO 11784 and ISO 11785 transponders
B
TC 27
Solid mineral fuels
ISO 9635-5:2014
ISO/TS 18806:2014
*
*
TC 28
ISO 26422:2014
Solid mineral fuels — Determination of Chlorine content
B
Petroleum products and related products of
synthetic or biological origin
*
Petroleum and related products — Determination of shear stability of lubricating
oils containing polymers — Method using a tapered roller bearing
B
TC 29
Small tools
ISO 12164-3:2014
Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks
for stationary tools
B
ISO 12164-4:2014
Hollow taper interface with flange contact surface — Part 4: Dimensions of
receivers for stationary tools
A
ISO
3919:2005/Amd
1:2014
Coated abrasives — Flap wheels with shaft — Amendment 1
TC 34
Food products
ISO 18301:2014
Animal and vegetable fats and oils — Determination of conventional mass per
volume (litre weight in air) — Oscillating U-tube method
B
Sensory analysis — Methodology — General guidance for conducting hedonic
tests with consumers in a controlled area
F
ISO 11136:2014
*
TC 37
ISO 24617-7:2014
XZ
Terminology and other language and content
resources
*
Language resource management — Semantic annotation framework — Part 7:
Spatial information (ISOspace)
G
TC 39
Machine tools
ISO 10791-6:2014
Test conditions for machining centres — Part 6: Accuracy of speeds and
interpolations
TC 45
Rubber and rubber products
ISO 1656:2014
Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content
D
Rubber latex, natural, concentrate — Determination of sludge content
A
ISO 2005:2014
*
F
ISO 2302:2014
Isobutene-isoprene rubber (IIR) — Evaluation procedure
B
ISO 4097:2014
Rubber, ethylene-propylene-diene (EPDM) — Evaluation procedure
C
ISO 4659:2014
Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches) —
Evaluation procedure
B
ISO 7663:2014
Halogenated isobutene-isoprene rubber (BIIR and CIIR) — Evaluation procedures
B
TC 67
Materials, equipment and offshore structures for
petroleum, petrochemical and natural gas industries
ISO 12736:2014
Petroleum and natural gas industries — Wet thermal insulation coatings for
pipelines, flow lines, equipment and subsea structures
G
Petroleum and natural gas industries — Specific requirements for offshore
structures — Part 3: Topsides structure
H
ISO 19901-3:2014
*
TC 70
ISO 7967-11:2014
Internal combustion engines
*
Reciprocating internal combustion engines — Vocabulary of components and
systems — Part 11: Fuel systems
D
TC 84
Devices for administration of medicinal products and
catheters
ISO 11608-1:2014
Needle-based injection systems for medical use — Requirements and test
methods — Part 1: Needle-based injection systems
TC 92
Fire safety
ISO/TR 17755:2014
Fire safety — Overview of national fire statistics practices
H
ISO 17554:2014
Reaction to fire tests — Mass loss measurement
D
F
ISO 102941:1996/Amd 1:2014
*
Fire resistance tests — Fire dampers for air distribution systems — Part 1: Test
method — Amendment 1
XZ
ISO 102944:2001/Amd 1:2014
*
Fire resistance tests — Fire dampers for air distribution systems — Part 4: Test of
thermal release mechanism — Amendment 1: Specific performance requirement
for thermal release mechanism based upon performance of thermal release
mechanism used in ISO 10294-1 test specimen
XZ
TC 110
Industrial trucks
ISO 22915-22:2014
Industrial trucks — Verification of stability — Part 22: Lateral- and front-stacking
trucks with and without elevating operator position
TC 130
Graphic technology
B
ISO 15341:2014
*
Graphic technology — Method for radius determination of printing cylinders
C
ISO 16684-2:2014
*
Graphic technology — Extensible metadata platform (XMP) — Part 2: Description
of XMP schemas using RELAX NG
F
ISO 16760:2014
*
Graphic technology — Prepress data exchange — Preparation and visualization of
RGB images to be used in RGB-based graphics arts workflows
F
TC 131
Fluid power systems
ISO 11500:2008
Hydraulic fluid power — Determination of the particulate contamination level of a
liquid sample by automatic particle counting using the light-extinction principle
TC 145
Graphical symbols
ISO
7010:2011/Amd
6:2014
*
TC 147
ISO 5667-14:2014
XZ
Water quality
*
TC 154
ISO 9735-10:2014
Graphical symbols — Safety colours and safety signs — Registered safety signs
— Amendment 6
E
Water quality — Sampling — Part 14: Guidance on quality assurance and quality
control of environmental water sampling and handling
E
Processes, data elements and documents in
commerce, industry and administration
*
TC 171
Electronic data interchange for administration, commerce and transport (EDIFACT)
— Application level syntax rules (Syntax version number: 4, Syntax release
number: 2) — Part 10: Syntax service directories
H
Document management applications
ISO 12651-2:2014
*
Electronic document management — Vocabulary — Part 2: Workflow management
B
ISO 14289-1:2014
*
Document management applications — Electronic document file format
enhancement for accessibility — Part 1: Use of ISO 32000-1 (PDF/UA-1)
C
ISO 14739-1:2014
*
Document management — 3D use of Product Representation Compact (PRC)
format — Part 1: PRC 10001
H
TC 172
ISO 8039:2014
Optics and photonics
*
Microscopes — Values, tolerances and symbols for magnification
TC 173
Assistive products for persons with disability
ISO 16840-10:2014
Wheelchairs — Resistance to ignition of non-integrated seat and back support
cushions — Part 10: Requirements and test methods
TC 174
Jewellery
A
C
ISO 11426:2014
*
Jewellery — Determination of gold in gold jewellery alloys — Cupellation method
(fire assay)
B
ISO 15096:2014
*
Jewellery — Determination of silver in 999 0/00 silver jewellery alloys — Difference
method using ICP-OES
A
TC 181
ISO 8124-1:2014
Safety of toys
*
TC 184
Safety of toys — Part 1: Safety aspects related to mechanical and physical
properties
H
Automation systems and integration
ISO 10303-41:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 41: Integrated generic resource: Fundamentals of product
description and support
B
ISO 10303-42:2014
*
Industrial automation systems and integration — Product data representation and
B
exchange — Part 42: Integrated generic resource: Geometric and topological
representation
ISO 10303-44:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 44: Integrated generic resource: Product structure configuration
B
ISO 10303-45:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 45: Integrated generic resource: Material and other engineering
properties
B
ISO 10303-47:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 47: Integrated generic resource: Shape variation tolerances
B
ISO 1030350:2002/Cor 2:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 50: Integrated generic resource: Mathematical constructs —
Technical Corrigendum 2
free
ISO 1030352:2011/Cor 1:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 52: Integrated generic resource: Mesh-based topology —
Technical Corrigendum 1
free
ISO 10303-59:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 59: Integrated generic resource — Quality of product shape data
B
ISO 10303101:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 101: Integrated application resource: Draughting
B
ISO 10303104:2000/Cor
2:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 104: Integrated application resource: Finite element analysis —
Technical Corrigendum 2
free
ISO 10303105:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 105: Integrated application resource: Kinematics
B
ISO 10303108:2005/Cor
2:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 108: Integrated application resource: Parameterization and
constraints for explicit geometric product models — Technical Corrigendum 2
free
ISO 10303109:2004/Cor
2:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 109: Integrated application resource: Kinematic and geometric
constraints for assembly models — Technical Corrigendum 2
free
ISO 10303111:2007/Cor
2:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 111: Integrated application resource : Elements for the
procedural modelling of solid shapes — Technical Corrigendum 2
free
ISO 10303209:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 209: Application protocol: Multidisciplinary analysis and design
H
ISO 10303210:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 210: Application protocol: Electronic assembly, interconnect and
packaging design
H
ISO 10303242:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 242: Application protocol: Managed model-based 3D
engineering
H
ISO/TS 10303409:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 409: Application module: AP209 multidisciplinary analysis and
design
B
ISO/TS 10303410:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 410: Application module: AP210 electronic assembly
interconnect and packaging design
B
ISO/TS 10303442:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 442: Application module: AP242 managed model based 3D
engineering
B
ISO 10303518:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 518: Application interpreted construct: Mechanical design
shaded presentation
B
ISO 10303522:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 522: Application interpreted construct: Machining features
B
ISO/TS 103031051:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 1051: Application module: Geometric tolerance
B
ISO/TS 103031127:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 1127: Application module: File identification
B
ISO/TS 103031142:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 1142: Application module: Requirement view definition
relationship
B
ISO/TS 103031603:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 1603: Application module: Analytical model
B
ISO/TS 103031636:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 1636: Application module: Assembly module design
B
ISO/TS 103031642:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 1642: Application module: Assembly module usage view
B
ISO/TS 103031650:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 1650: Application module: Bare die
B
ISO/TS 103031686:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 1686: Application module: Interconnect module usage view
B
ISO/TS 103031698:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 1698: Application module: Layered interconnect module design
B
ISO/TS 103031706:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 1706: Application module: Non feature shape element
B
ISO/TS 103031707:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 1707: Application module: Package
B
ISO/TS 103031718:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 1718: Application module: Layered interconnect simple template
B
ISO/TS 103031803:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 1803: Application module: Process plan
B
ISO/TS 103033001:2014
*
Industrial automation systems and integration — Product data representation and
exchange — Part 3001: Business object model: Managed model based 3d
engineering
B
ISO 1358420:1998/Cor 1:2014
*
Industrial automation systems and integration — Parts library — Part 20: Logical
resource: Logical model of expressions — Technical Corrigendum 1
TC 188
Small craft
ISO 13297:2014
Small craft — Electrical systems — Alternating current installations
TC 207
Environmental management
free
E
ISO/TS 14072:2014
Environmental management — Life cycle assessment — Requirements and
guidelines for organizational life cycle assessment
TC 212
Clinical laboratory testing and in vitro diagnostic test
systems
ISO/TS 178221:2014
*
In vitro diagnostic test systems — Qualitative nucleic acid-based in vitro
examination procedures for detection and identification of microbial pathogens —
Part 1: General requirements, terms and definitions
TC 213
Dimensional and geometrical product specifications
and verification
ISO 2692:2014
Geometrical product specifications (GPS) — Geometrical tolerancing — Maximum
material requirement (MMR), least material requirement (LMR) and reciprocity
requirement (RPR)
TC 215
Health informatics
E
D
F
ISO/TS 13131:2014
*
Health informatics — Telehealth services — Quality planning guidelines
E
ISO/TR 283803:2014
*
Health informatics — IHE global standards adoption — Part 3: Deployment
C
IEC/TR 80001-25:2014
*
Application of risk management for IT-networks incorporating medical devices —
Part 2-5: Application guidance — Guidance for distributed alarm systems
E
TC 218
Timber
ISO 13061-1:2014
Physical and mechanical properties of wood — Test methods for small clear wood
specimens — Part 1: Determination of moisture content for physical and
mechanical tests
A
ISO 13061-2:2014
Physical and mechanical properties of wood — Test methods for small clear wood
specimens — Part 2: Determination of density for physical and mechanical tests
A
ISO 13061-3:2014
Physical and mechanical properties of wood — Test methods for small clear wood
specimens — Part 3: Determination of ultimate strength in static bending
A
ISO 13061-4:2014
Physical and mechanical properties of wood — Test methods for small clear wood
specimens — Part 4: Determination of modulus of elasticity in static bending
A
ISO 13061-6:2014
Physical and mechanical properties of wood — Test methods for small clear wood
specimens — Part 6: Determination of ultimate tensile stress parallel to grain
A
ISO 13061-7:2014
Physical and mechanical properties of wood — Test methods for small clear wood
specimens — Part 7: Determination of ultimate tensile stress perpendicular to grain
A
General requirements for solid wood flooring
C
ISO 17959:2014
*
TC 219
ISO 24338:2014
Floor coverings
*
Laminate floor coverings — Determination of abrasion resistance
TC 221
Geosynthetics
ISO 13427:2014
Geosynthetics — Abrasion damage simulation (sliding block test)
TC 223
Societal security
D
B
ISO 22315:2014
*
Societal security — Mass evacuation — Guidelines for planning
D
TC 242
Energy Management
ISO 50003:2014
Energy management systems — Requirements for bodies providing audit and
certification of energy management systems
C
ISO 50004:2014
*
Energy management systems — Guidance for the implementation, maintenance
and improvement of an energy management system
F
ISO 50006:2014
*
Energy management systems — Measuring energy performance using energy
baselines (EnB) and energy performance indicators (EnPI) — General principles
and guidance
E
ISO 50015:2014
Energy management systems — Measurement and verification of energy
performance of organizations — General principles and guidance
D
TMBG
Technical Management Board - groups
IWA 17:2014
*
JTC 1
Information and operations security and integrity requirements for lottery and
gaming organizations
C
Information technology
ISO/IEC TR 291812:2014
*
Information technology — Future Network — Problem statement and requirements
— Part 2: Naming and addressing
F
ISO/IEC TR 291815:2014
*
Information technology — Future Network — Problem statement and requirements
— Part 5: Security
A
ISO/IEC
90003:2014
*
Software engineering — Guidelines for the application of ISO 9001:2008 to
computer software
G
ISO/IEC 247755:2014
*
Information technology — Storage management — Part 5: File systems
H
ISO/IEC 247756:2014
*
Information technology — Storage management — Part 6: Fabric
H
ISO/IEC 247757:2014
*
Information technology — Storage management — Part 7: Host Elements
H
ISO/IEC 247758:2014
*
Information technology — Storage management — Part 8: Media Libraries
H
ISO/IEC 1976310:2014
*
Information technology — Metamodel framework for interoperability (MFI)
— Part 10: Core model and basic mapping
E
ISO/IEC 247521:2014
*
Information technology — User interfaces — Universal remote console — Part 1:
General framework
F
ISO/IEC 247522:2014
*
Information technology — User interfaces — Universal remote console — Part 2:
User interface socket description
F
ISO/IEC 247524:2014
*
Information technology — User interfaces — Universal remote console — Part 4:
Target description
D
ISO/IEC 247525:2014
*
Information technology — User interfaces — Universal remote console — Part 5:
Resource description
E
ISO/IEC 247526:2014
*
Information technology — User interfaces — Universal remote console — Part 6:
Web service integration
G
Standards confirmed
The following International Standards are confimred for a five year period:
TC 5
Ferrous metal pipes and metallic fittings
ISO 4179:2005
(reconfirmed)
ISO 6594:2006
(reconfirmed)
ISO 16134:2006
(reconfirmed)
TC 8
Ships and marine technology
ISO 16273:2003
(reconfirmed)
TC 20
Aircraft and space vehicles
ISO 2046:1973
(reconfirmed)
ISO 2434:1973
(reconfirmed)
ISO 2435:1973
(reconfirmed)
ISO 15862:2009
ISO 15863:2003
(reconfirmed)
TC 22
Road vehicles
ISO 16833:2006
(reconfirmed)
ISO 6726:1988
(reconfirmed)
ISO 8644:2006
(reconfirmed)
ISO 9021:1988
(reconfirmed)
ISO 9129:2008
ISO 9130:2005
(reconfirmed)
ISO 11486:2006
(reconfirmed)
ISO 13232-1:2005
(reconfirmed)
ISO 13232-2:2005
(reconfirmed)
ISO 13232-3:2005
(reconfirmed)
ISO 13232-4:2005
(reconfirmed)
ISO 13232-6:2005
(reconfirmed)
ISO 13232-7:2005
(reconfirmed)
ISO 13232-8:2005
(reconfirmed)
TC 23
Tractors and machinery for agriculture and forestry
ISO 21299:2009
ISO 11806-1:2011
ISO 11806-2:2011
TC 29
Small tools
ISO 3002-2:1982
(reconfirmed)
ISO 3002-3:1984
(reconfirmed)
TC 34
Food products
ISO 21415-4:2006
(reconfirmed)
ISO 21569:2005
(reconfirmed)
TC 38
Textiles
ISO 105-A02:1993
(reconfirmed)
ISO 105-A03:1993
(reconfirmed)
ISO 9867:2009
ISO 23232:2009
TC 39
Machine tools
ISO 230-4:2005
(reconfirmed)
ISO 2773-1:1973
(reconfirmed)
ISO 2773-2:1973
(reconfirmed)
ISO 6155:1998
(reconfirmed)
ISO 10791-3:1998
(reconfirmed)
ISO 10791-4:1998
(reconfirmed)
ISO 10791-5:1998
(reconfirmed)
ISO 13041-3:2009
ISO 13041-6:2009
TC 43
Acoustics
ISO 389-2:1994
(reconfirmed)
ISO 389-5:2006
(reconfirmed)
ISO 389-9:2009
ISO 8253-2:2009
ISO 16832:2006
(reconfirmed)
TC 44
Welding and allied processes
ISO 3580:2010
ISO 14171:2010
ISO 14341:2010
ISO 14344:2010
ISO 15792-1:2000
(reconfirmed)
ISO 15792-2:2000
(reconfirmed)
ISO 17633:2010
ISO 18274:2010
ISO 24034:2010
ISO 5822:1988
(reconfirmed)
ISO 5827:1983
(reconfirmed)
TC 46
Information and documentation
ISO 15836:2009
ISO 4:1997
(reconfirmed)
ISO 10324:1997
(reconfirmed)
TC 58
Gas cylinders
ISO 22435:2007
ISO 20703:2006
(reconfirmed)
ISO 11755:2005
(reconfirmed)
ISO 21007-1:2005
(reconfirmed)
TC 59
Buildings and civil engineering works
ISO 7162:1992
(reconfirmed)
TC 60
Gears
IEC 61400-4:2012
TC 72
Textile machinery and accessories
ISO 93-1:2006
(reconfirmed)
ISO 93-2:2006
(reconfirmed)
ISO 368:2006
(reconfirmed)
ISO 5234:2005
(reconfirmed)
ISO 9947:2005
(reconfirmed)
TC 83
Sports and other recreational facilities and equipment
ISO 11497:1998
(reconfirmed)
ISO 22264:2006
(reconfirmed)
TC 98
Bases for design of structures
ISO 23469:2005
(reconfirmed)
TC 102
Iron ore and direct reduced iron
ISO 5418-1:2006
(reconfirmed)
ISO 5418-2:2006
(reconfirmed)
ISO 7764:2006
(reconfirmed)
ISO 9517:2007
(reconfirmed)
ISO 9682-2:2006
(reconfirmed)
ISO 9683-1:2006
(reconfirmed)
ISO 9685:1991
(reconfirmed)
ISO 11534:2006
(reconfirmed)
ISO 11535:2006
(reconfirmed)
ISO 16042:2007
(reconfirmed)
TC 106
Dentistry
ISO 3630-4:2009
TC 107
Metallic and other inorganic coatings
ISO 14923:2003
(reconfirmed)
ISO 14924:2005
(reconfirmed)
ISO 16348:2003
(reconfirmed)
ISO 21968:2005
(reconfirmed)
ISO 4525:2003
(reconfirmed)
ISO 4526:2004
(reconfirmed)
ISO 4527:2003
(reconfirmed)
ISO 12683:2004
(reconfirmed)
TC 108
Mechanical vibration, shock and condition monitoring
ISO 2041:2009
TC 121
Anaesthetic and respiratory equipment
ISO 10651-5:2006
(reconfirmed)
ISO 26782:2009
ISO 80601-256:2009
TC 155
Nickel and nickel alloys
ISO 11433:1993
(reconfirmed)
TC 165
Timber structures
ISO 10984-1:2009
ISO 10984-2:2009
TC 173
Assistive products for persons with disability
ISO 9949-1:1993
(reconfirmed)
ISO 9949-2:1993
(reconfirmed)
ISO 9949-3:1993
(reconfirmed)
TC 190
Soil quality
ISO 23161:2009
TC 210
Quality management and corresponding general aspects for
medical devices
ISO/TS 192181:2011
TC 216
Footwear
ISO 17702:2003
(reconfirmed)
ISO 17703:2003
(reconfirmed)
ISO 17705:2003
(reconfirmed)
ISO 17706:2003
(reconfirmed)
ISO 17709:2004
(reconfirmed)
ISO 20864:2004
(reconfirmed)
ISO 22651:2002
(reconfirmed)
ISO 22653:2003
(reconfirmed)
ISO 22774:2004
(reconfirmed)
ISO 22775:2004
(reconfirmed)
ISO 22776:2004
(reconfirmed)
ISO 22777:2004
(reconfirmed)
JTC 1
Information technology
ISO/IEC 154082:2008
ISO/IEC 154083:2008
ISO/IEC TR
15446:2009
ISO/IEC 180141:2008
ISO/IEC 18045:2008
ISO/IEC 19772:2009
Standards withdrawn
Period from 01 December to 31 December 2014
TC 6
Paper, board and pulps
ISO 4046-1:2002
(replaced by )
ISO 4046-2:2002
(replaced by )
ISO 4046-3:2002
(replaced by )
ISO 4046-4:2002
(replaced by )
ISO 4046-5:2002
(replaced by )
TC 8
Ships and marine technology
ISO 3913:1977
(replaced by )
ISO 3913:1977/Add
1:1980
(replaced by )
TC 18
Zinc and zinc alloys
ISO 1976:1975
(replaced by )
TC 34
Food products
ISO 7586:1985
(replaced by )
TC 43
Acoustics
ISO 11094:1991
(replaced by )
TC 69
Applications of statistical methods
ISO 7873:1993
(replaced by )
TC 85
Nuclear energy, nuclear technologies, and radiological
protection
ISO 921:1997
(replaced by )
TC 126
Tobacco and tobacco products
ISO 10185:2004
(replaced by )
TC 129
Aluminium ores
ISO 6606:1986
(replaced by )
TC 184
Automation systems and integration
ISO 10303201:1994
(replaced by ISO 10303-242:2014)
ISO 10303202:1996
(replaced by ISO 10303-242:2014)
ISO 10303203:2011
(replaced by ISO 10303-242:2014)
ISO 10303204:2002
(replaced by ISO 10303-242:2014)
ISO 10303214:2010
(replaced by ISO 10303-242:2014)
TC 190
Soil quality
ISO 13877:1998
(replaced by )
TC 203
Technical energy systems
ISO 13600:1997
(replaced by )
ISO 13601:1998
(replaced by )
ISO 13602-1:2002
(replaced by )
TC 218
Timber
ISO 3133:1975
(replaced by ISO 13061-3:2014)
ISO 3345:1975
(replaced by ISO 13061-6:2014)
ISO 3346:1975
(replaced by ISO 13061-7:2014)
ISO 3349:1975
(replaced by ISO 13061-4:2014)
JTC 1
Information technology
ISO/IEC
24775:2011
(replaced by ISO/IEC 24775-1:2014, ISO/IEC 24775-2:2014, ISO/IEC 24775-3:2014, ISO/IEC
24775-4:2014, ISO/IEC 24775-5:2014, ISO/IEC 24775-6:2014, ISO/IEC 24775-7:2014,
ISO/IEC 24775-8:2014)
Meeting calendar
(update at 01 December 2014)
Meetings called for the month of November are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
January 2015
1216
Weinheim
(Germany)
TC 69/SC 4
Applications of statistical methods/Applications of statistical
methods in process management
12-
Dublin (Ireland)
TC 121/SC 3
Anaesthetic and respiratory equipment/Lung ventilators and
16
related equipment
13
Geneva
(Switzerland)
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
1920
Toledo (Spain)
JTC 1/SC 37
Information technology/Biometrics
1923
Copenhagen
(Denmark)
JTC 1/SC 35
Information technology/User interfaces
1923
Berlin (Germany)
PC 248
Sustainability criteria for bioenergy
2223
Cape Town (South
Africa)
TC 44/SC 8
Welding and allied processes/Equipment for gas welding,
cutting and allied processes
2529
Foshan (China)
TC 107
Metallic and other inorganic coatings
2529
Foshan (China)
TC 107/SC 3
Metallic and other inorganic coatings/Electrodeposited
coatings and related finishes
2529
Foshan (China)
TC 107/SC 8
Metallic and other inorganic coatings/Chemical conversion
coatings
2627
Paris (France)
TC 166
Ceramic ware, glassware and glass ceramic ware in contact
with food
28
Berlin (Germany)
TC 207/SC 3
Environmental management/Environmental labelling
29
West Conshohocken
(Philadelphia) (USA)
TC 261
Additive manufacturing
*
February 2015
2
Virtual (Unknown)
TC 22/SC 34
Road vehicles/Propulsion, powertrain and powertrain fluids
2-3
Paris (France)
TC 44/SC 3
Welding and allied processes/Welding consumables
2-5
Beijing (China)
TC 257
Evaluation of energy savings
313
London (United
Kingdom)
TC 213
Dimensional and geometrical product specifications and
verification
913
Fairfax (USA)
TC 58/SC 4
Gas cylinders/Operational requirements for gas cylinders
1012
London (United
Kingdom)
*
TC 8/SC 8
Ships and marine technology/Ship design
11
Geneva
(Switzerland)
*
CSC/SPC
Council/Strategy and Policy Committee (CSC/SPC)
11
St. Petersburg,
Florida (USA)
TC 115
Pumps
1213
Geneva
(Switzerland)
President's
committee
President's committee
2223
Miami (USA)
TMB
Technical Management Board
March 2015
2-6
Troy (USA)
3
Virtual (Unknown)
9
Caparica (Portugal)
913
TC 22/SC 37
Road vehicles/Electrically propelled vehicles
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
TC 48
Laboratory equipment
Paris (France)
TC 108
Mechanical vibration, shock and condition monitoring
913
La Plaine St-Denis
(France)
TC 108/SC 3
Mechanical vibration, shock and condition monitoring/Use and
calibration of vibration and shock measuring instruments
913
London (United
Kingdom)
TC 110/SC 4
Industrial trucks/Rough-terrain trucks
913
Morioka (Japan)
TC 292
Security (official starting date=2015-01-01)
11
Paris (France)
TC 108/SC 6
Mechanical vibration, shock and condition
monitoring/Vibration and shock generating systems
1112
Delft (Netherlands)
TC 67/SC 7
Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries/Offshore structures
12
West Conshohocken
(Philadelphia) (USA)
TC 221
Geosynthetics
16
Geneva
(Switzerland)
President's
committee
President's committee
1618
Geneva
(Switzerland)
COUNCIL
Council
2324
Chengdu (China)
*
TC 17/SC 15
Steel/Railway rails, rails fasteners, wheels and wheelsets
2327
Vienna (Austria)
*
JTC 1/SC 38
Information technology/Cloud Computing and Distributed
Platforms
2327
Paris (France)
PC 278
Anti-bribery management systems
2327
Tokyo (Japan)
TC 5/SC 2
Ferrous metal pipes and metallic fittings/Cast iron pipes,
fittings and their joints
2526
Nara (Japan)
TC 184
Automation systems and integration
26
Berlin (Germany)
TC 145/SC 2
Graphical symbols/Safety identification, signs, shapes,
symbols and colours
**
PC 287
Chain of custody of wood and wood-based products
*
TC 20/SC 9
Aircraft and space vehicles/Air cargo and ground equipment
Rio de Janeiro
(Brazil)
*
*
*
*
March-April 2015
312
Montreal (Canada)
1st Quarter 2015
(United Kingdom)
**
PC 284
Management system for private security operations Requirements with guidance
Foshan (China)
**
TC 107/SC 4
Metallic and other inorganic coatings/Hot dip coatings
(galvanized, etc.)
Foshan (China)
**
TC 107/SC 7
Metallic and other inorganic coatings/Corrosion tests
*
TC 92/SC 1
Fire safety/Fire initiation and growth
April 2015
10
London (United
Kingdom)
13
Paris (France)
TC 29/SC 2
Small tools/Holding tools, adaptative items and interfaces
1314
Lyon (France)
TC 117
Fans
1317
(Czech Republic)
TC 224
Service activities relating to drinking water supply systems
and wastewater systems - Quality criteria of the service and
performance indicators
14
Paris (France)
TC 29/SC 9
Small tools/Tools with defined cutting edges, cutting items
1517
St. Petersburg
(Russian Federation)
TC 172/SC 4
Optics and photonics/Telescopic systems
16
Tienjin (China)
TC 161
Control and protective devices for gas and/or oil burners and
appliances
17
Paris (France)
TC 29
Small tools
1924
Vico Equense (Italy)
TC 184/SC 4
Automation systems and integration/Industrial data
1924
Hangzhou (China)
*
TC 204
Intelligent transport systems
2022
Zurich (Switzerland)
*
TC 126
Tobacco and tobacco products
2022
Zurich (Switzerland)
*
TC 126/SC 1
Tobacco and tobacco products/Physical and dimensional
tests
2022
Zurich (Switzerland)
*
TC 126/SC 2
Tobacco and tobacco products/Leaf tobacco
2024
San Francisco
(USA)
*
TC 215
Health informatics
21
Beijing (China)
TC 274
Light and lighting
2122
Düsseldorf
(Germany)
TC 44/SC 10
Welding and allied processes/Unification of requirements in
the field of metal welding
2122
(Kazakhstan)
TC 67/SC 2
Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries/Pipeline
transportation systems
2223
Milan (Italy)
TC 8/SC 12
Ships and marine technology/Ships and marine technology Large yachts
2224
General Roca
(Argentina)
TC 34/SC 12
Food products/Sensory analysis
**
*
**
*
23
Düsseldorf
(Germany)
TC 44/SC 11
Welding and allied processes/Qualification requirements for
welding and allied processes personnel
24
Atlanta (USA)
TC 6/SC 2
Paper, board and pulps/Test methods and quality
specifications for paper and board
24
Luxemburg
(Luxembourg)
TC 31
Tyres, rims and valves
25
Atlanta (USA)
TC 6
Paper, board and pulps
30
London (United
Kingdom)
TC 30/SC 2
Measurement of fluid flow in closed conduits/Pressure
differential devices
30
London (United
Kingdom)
TC 30/SC 5
Measurement of fluid flow in closed conduits/Velocity and
mass methods
**
TC 34/SC 15
Food products/Coffee
**
TC 67/SC 4
Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries/Drilling and
production equipment
TC 30
Measurement of fluid flow in closed conduits
(USA)
**
**
April-May 2015
1516
(United Kingdom)
271
London (United
Kingdom)
May 2015
4-7
Toronto (Canada)
*
TC 68
Financial services
4-8
Kuching (Malaysia)
**
JTC 1/SC 27
Information technology/IT Security techniques
4-8
(Unknown)
**
TC 36
Cinematography
815
Tokyo (Japan)
**
TC 10
Technical product documentation
1112
Kuching (Malaysia)
*
JTC 1/SC 27
Information technology/IT Security techniques
1112
Ottawa (Canada)
*
TC 159/SC 4
Ergonomics/Ergonomics of human-system interaction
1113
Turin (Italy)
*
TC 22/SC 35
Road vehicles/Lighting and visibility
1115
Ohio (USA)
**
TC 184/SC 5
Automation systems and integration/Interoperability,
integration, and architectures for enterprise systems and
automation applications
1116
Bologna (Italy)
**
TC 130
Graphic technology
1215
London (United
Kingdom)
**
TC 156
Corrosion of metals and alloys
13
Paris (France)
**
TC 87
Cork
1822
(Brazil)
**
JTC 1/SC 40
Information technology/IT Service Management and IT
Governance
1822
London (United
Kingdom)
**
TC 4
Rolling bearings
1822
London (United
Kingdom)
*
TC 4/SC 6
Rolling bearings/Insert bearings
1822
London (United
Kingdom)
*
TC 4/SC 9
Rolling bearings/Tapered roller bearings
1822
London (United
Kingdom)
*
TC 4/SC 11
Rolling bearings/Linear motion rolling bearings
1822
Chengdu (China)
**
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
1822
Luzern (Switzerland)
*
TC 114
Horology
19
Naples (Italy)
TC 29/SC 5
Small tools/Grinding wheels and abrasives
2122
Copenhagen
(Denmark)
TC 173
Assistive products for persons with disability
22
Los Angeles (USA)
TC 119
Powder metallurgy
22
Cape Town (South
Africa)
*
TC 228
Tourism and related services
2429
Tokyo (Japan)
*
TC 113
Hydrometry
2529
Madrid (Spain)
**
TC 23/SC 18
Tractors and machinery for agriculture and forestry/Irrigation
and drainage equipment and systems
2628
Panama (Panama)
*
TC 8/SC 1
Ships and marine technology/Lifesaving and fire protection
2629
Buenos Aires
(Argentina)
*
TC 85/SC 5
Nuclear energy, nuclear technologies, and radiological
protection/Nuclear fuel cycle
27
London (United
Kingdom)
**
TC 67/SC 5
Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries/Casing, tubing and
drill pipe
Glasgow, Scotland
(United Kingdom)
**
JTC 1/SC 32
Information technology/Data management and interchange
(USA)
**
PC 272
Forensic sciences
815
Tokyo (Japan)
**
TC 10/SC 1
Technical product documentation/Basic conventions
815
Tokyo (Japan)
**
TC 10/SC 6
Technical product documentation/Mechanical engineering
documentation
815
Tokyo (Japan)
**
TC 10/SC 10
Technical product documentation/Process plant
documentation
Tokyo (Japan)
**
TC 113/SC 1
Hydrometry/Velocity area methods
Tokyo (Japan)
**
TC 113/SC 2
Hydrometry/Flow measurement structures
Tokyo (Japan)
**
TC 113/SC 5
Hydrometry/Instruments, equipment and data management
*
Tokyo (Japan)
**
TC 113/SC 6
Hydrometry/Sediment transport
Tokyo (Japan)
**
TC 113/SC 8
Hydrometry/Ground water
London (United
Kingdom)
**
TC 131/SC 6
Fluid power systems/Contamination control
Vancouver (Canada)
**
TC 282/SC 1
Water re-use/Treated wastewater re-use for Irrigation
Vancouver (Canada)
**
TC 282/SC 3
Water re-use/Risk and performance evaluation of water reuse systems
June 2015
1-4
Beijing (China)
*
TC 249
Traditional chinese medicine
1-5
Arlington (USA)
*
TC 20/SC 14
Aircraft and space vehicles/Space systems and operations
1-5
Sapporo (Japan)
**
TC 42
Photography
1-5
Seattle (USA)
*
TC 43/SC 3
Acoustics/Underwater acoustics
1-5
Berlin (Germany)
*
TC 44/SC 6
Welding and allied processes/Resistance welding and allied
mechanical joining
1-6
Philadelphia (USA)
**
TC 147
Water quality
3-5
(Japan)
**
TC 145
Graphical symbols
5
(France)
**
TC 22/SC 36
Road vehicles/Safety aspects and impact testing
5-6
San Antonio (USA)
**
TC 85/SC 6
Nuclear energy, nuclear technologies, and radiological
protection/Reactor technology
812
Houston (USA)
*
TC 35
Paints and varnishes
812
Berlin (Germany)
**
TC 121
Anaesthetic and respiratory equipment
910
New York (USA)
*
TC 29/SC 10
Small tools/Assembly tools for screws and nuts, pliers and
nippers
912
Pretoria (South
Africa)
**
REMCO
Committee on reference materials
912
London (United
Kingdom)
*
TC 289
Brand evaluation
1011
(France)
**
TC 17/SC 9
Steel/Tinplate and blackplate
1112
Paris (France)
TC 24/SC 4
Particle characterization including sieving/Particle
characterization
1112
Southampton
(United Kingdom)
**
TC 211
Geographic information/Geomatics
1516
Kyoto (Japan)
*
TC 22/SC 32
Road vehicles/Electrical and electronic components and
general system aspects
1519
Vancouver (Canada)
**
TC 22/SC 13
Road vehicles/Ergonomics applicable to road vehicles
1519
Vancouver (Canada)
1519
Munich (Germany)
1718
Geneva
(Switzerland)
1719
*
TC 22/SC 39
Road vehicles/Ergonomics
TC 94/SC 14
Personal safety -- Protective clothing and equipment/Firefighters' personal equipment
*
TMB
Technical Management Board
Berlin (Germany)
*
TC 172/SC 9
Optics and photonics/Electro-optical systems
1819
Stuttgart (Germany)
*
TC 184/SC 2
Automation systems and integration/Robots and robotic
devices
2126
Matsue (Japan)
**
TC 37
Terminology and other language and content resources
2225
Avignon (France)
*
TC 54
Essential oils
2226
(Netherlands)
**
TC 34/SC 9
Food products/Microbiology
2226
(China)
**
TC 69
Applications of statistical methods
2226
La Plaine St-Denis
(France)
*
TC 94/SC 6
Personal safety -- Protective clothing and equipment/Eye and
face protection
2226
Göteborg (Sweden)
*
TC 188
Small craft
25
Göteborg (Sweden)
*
TC 188/SC 2
Small craft/Engines and propulsion systems
30
Virtual (Unknown)
*
President's
committee
President's committee
Matsue (Japan)
**
JTC 1/SC 28
Information technology/Office equipment
Montreal (Canada)
**
JTC 1/SC 31
Information technology/Automatic identification and data
capture techniques
(Australia)
**
JTC 1/SC 36
Information technology/Information technology for learning,
education and training
Zurich (Switzerland)
**
TC 17/SC 17
Steel/Steel wire rod and wire products
(Europe)
**
TC 34/SC 18
Food products/Cocoa
Beijing (China)
**
TC 46
Information and documentation
Mexico City (Mexico)
**
TC 242
Energy Management
(Unknown)
**
TC 268/SC 1
Sustainable development in communities/Smart community
infrastructures
June-July 2015
303
Milan (Italy)
*
TC 193
Natural gas
303
Milan (Italy)
*
TC 193/SC 1
Natural gas/Analysis of natural gas
303
Milan (Italy)
*
TC 193/SC 3
Natural gas/Upstream area
(Europe)
**
TC 94/SC 13
Personal safety -- Protective clothing and
equipment/Protective clothing
Istanbul (Turkey)
**
TC 120
Leather
(China)
**
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
**
TC 31/SC 9
Tyres, rims and valves/Valves for tube and tubeless tyres
2nd Quarter 2015
1st Semester 2015
(USA)
July 2015
1-7
Berlin (Germany)
*
TC 91
Surface active agents
610
Helsinki (Finland)
*
TC 44
Welding and allied processes
(USA)
**
TC 86/SC 6
Refrigeration and air-conditioning/Testing and rating of airconditioners and heat pumps
*
TC 206
Fine ceramics
August 2015
2628
Jeju (Korea,
Republic of)
August-September 2015
314
Hokaido (Japan)
*
JTC 1/SC 35
Information technology/User interfaces
September 2015
1-6
(Canada)
**
TC 163
Thermal performance and energy use in the built environment
412
New Delhi (India)
**
TC 207
Environmental management
7
Teddington (United
Kingdom)
*
TC 164/SC 2
Mechanical testing of metals/Ductility testing
711
Paris (France)
*
TC 153
Valves
714
Sydney (Australia)
**
TC 96
Cranes
810
Teddington (United
Kingdom)
*
TC 164/SC 5
Mechanical testing of metals/Fatigue testing
9
Teddington (United
Kingdom)
*
TC 164/SC 1
Mechanical testing of metals/Uniaxial testing
9
Teddington (United
Kingdom)
*
TC 164/SC 4
Mechanical testing of metals/Toughness testing -- Fracture
(F), Pendulum (P), Tear (T)
10
Teddington (United
*
TC 164/SC 3
Mechanical testing of metals/Hardness testing
Kingdom)
11
Teddington (United
Kingdom)
*
TC 164
Mechanical testing of metals
13
Seoul (Korea,
Republic of)
*
President's
committee
President's committee
1317
Lahaina, Hawaii
(USA)
**
TC 127
Earth-moving machinery
14
Seoul (Korea,
Republic of)
*
COUNCIL
Council
1415
Hawaii (USA)
*
JTC 1/SC 22
Information technology/Programming languages, their
environments and system software interfaces
1418
Milan (Italy)
*
TC 43
Acoustics
1418
Berlin (Germany)
**
TC 150
Implants for surgery
1418
(Canada)
**
TC 205
Building environment design
1418
Berlin (Germany)
*
TC 256
Pigments, dyestuffs and extenders
1425
Berlin (Germany)
*
TC 213
Dimensional and geometrical product specifications and
verification
15
Seoul (Korea,
Republic of)
*
DEVCO
Committee on developing country matters
15
Vienna (Austria)
*
TC 33
Refractories
1516
Seoul (Korea,
Republic of)
*
TMB
Technical Management Board
1618
Seoul (Korea,
Republic of)
*
GA
General Assembly
17
Seoul (Korea,
Republic of)
*
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
2124
Delft (Netherlands)
**
TC 146/SC 1
Air quality/Stationary source emissions
2125
Poznan (Poland)
**
TC 23/SC 6
Tractors and machinery for agriculture and
forestry/Equipment for crop protection
2125
Delft (Netherlands)
**
TC 146/SC 6
Air quality/Indoor air
2829
Basel (Switzerland)
**
TC 44/SC 8
Welding and allied processes/Equipment for gas welding,
cutting and allied processes
(Europe)
**
TC 22/SC 19
Road vehicles/Wheels
1418
Milan (Italy)
*
TC 43/SC 1
Acoustics/Noise
14-
Milan (Italy)
*
TC 43/SC 2
Acoustics/Building acoustics
18
(Europe)
**
TC 67
Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries
(Japan)
**
TC 133
Clothing sizing systems - size designation, size measurement
methods and digital fittings
Johor Bahru
(Malaysia)
**
TC 165
Timber structures
Seattle (USA)
**
TC 201/SC 6
Surface chemical analysis/Secondary ion mass spectrometry
(Netherlands)
**
TC 258
Project, programme and portfolio management
(China)
**
TC 290
Online reputation
September-October 2015
282
Edmonton (Canada)
*
TC 229
Nanotechnologies
October 2015
1
Rome (Italy)
*
TC 39/SC 4
Machine tools/Woodworking machines
5
(USA)
**
TC 23/SC 13
Tractors and machinery for agriculture and forestry/Powered
lawn and garden equipment
5-9
Dublin (Ireland)
*
JTC 1/SC 38
Information technology/Cloud Computing and Distributed
Platforms
5-9
Madrid (Spain)
*
TC 59/SC 15
Buildings and civil engineering works/Performance description
of houses
5-9
Vienna (Austria)
*
TC 190
Soil quality
5-9
Vienna (Austria)
*
TC 190/SC 2
Soil quality/Sampling
5-9
Vienna (Austria)
*
TC 190/SC 3
Soil quality/Chemical methods and soil characteristics
5-9
Vienna (Austria)
*
TC 190/SC 4
Soil quality/Biological methods
5-9
Vienna (Austria)
*
TC 190/SC 7
Soil quality/Soil and site assessment
8
Virtual (Unknown)
*
President's
committee
President's committee
8-9
Sao Paulo (Brazil)
*
TC 58/SC 2
Gas cylinders/Cylinder fittings
9
Copenhagen
(Denmark)
*
TC 254
Safety of amusement rides and amusement devices
1216
Paris (France)
*
TC 34/SC 17
Food products/Management systems for food safety
1216
Turin (Italy)
**
TC 70
Internal combustion engines
1216
Beijing (China)
*
TC 181
Safety of toys
1217
Beijing (China)
*
TC 20
Aircraft and space vehicles
1217
Beijing (China)
*
TC 20/SC 4
Aircraft and space vehicles/Aerospace fastener systems
1217
Beijing (China)
*
TC 20/SC 8
Aircraft and space vehicles/Aerospace terminology
1517
Seattle (USA)
*
TC 201
Surface chemical analysis
1823
Vichy (France)
*
TC 45
Rubber and rubber products
1823
Vichy (France)
*
TC 45/SC 4
Rubber and rubber products/Products (other than hoses)
1823
Baltimore (USA)
*
TC 184/SC 4
Automation systems and integration/Industrial data
1921
Jeju (Korea,
Republic of)
*
TC 281
Fine Bubble Technology
1923
(Germany)
**
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
1923
Gaithersburg (USA)
*
TC 92
Fire safety
1923
Gaithersburg (USA)
*
TC 92/SC 1
Fire safety/Fire initiation and growth
1923
Brussels (Belgium)
TC 154
Processes, data elements and documents in commerce,
industry and administration
2023
Oslo (Norway)
**
TC 58/SC 3
Gas cylinders/Cylinder design
2023
Beijing (China)
*
TC 269
Railway applications
2124
Santiago (Chile)
*
TC 195
Building construction machinery and equipment
2223
London (United
Kingdom)
*
TC 79/SC 2
Light metals and their alloys/Organic and anodic oxidation
coatings on aluminium
2223
Berlin (Germany)
*
TC 209
Cleanrooms and associated controlled environments
2629
Pretoria (South
Africa)
**
TC 264
Fireworks
2630
New Delhi (India)
*
JTC 1/SC 27
Information technology/IT Security techniques
2630
Porto Alegre (Brazil)
*
TC 23/SC 17
Tractors and machinery for agriculture and forestry/Manually
portable forest machinery
2830
Tsukuba (Japan)
**
TC 202
Microbeam analysis
2930
Tampa, Florida
(USA)
*
TC 17/SC 12
Steel/Continuous mill flat rolled products
(Unknown)
**
TC 2
Fasteners
Madrid (Spain)
**
TC 10/SC 8
Technical product documentation/Construction documentation
(Netherlands)
**
TC 34/SC 2
Food products/Oleaginous seeds and fruits and oilseed meals
(Netherlands)
**
TC 34/SC 11
Food products/Animal and vegetable fats and oils
Nairobi (Kenya)
**
TC 38
Textiles
Nairobi (Kenya)
**
TC 38/SC 1
Textiles/Tests for coloured textiles and colorants
Nairobi (Kenya)
**
TC 38/SC 2
Textiles/Cleansing, finishing and water resistance tests
Nairobi (Kenya)
**
TC 38/SC 23
Textiles/Fibres and yarns
Nairobi (Kenya)
**
TC 38/SC 24
Textiles/Conditioning atmospheres and physical tests for
textile fabrics
Madrid (Spain)
**
TC 59/SC 3
Buildings and civil engineering works/Functional/user
requirements and performance in building construction
Madrid (Spain)
**
TC 59/SC 16
Buildings and civil engineering works/Accessibility and
usability of the built environment
Washington, D.C
(USA)
**
TC 79
Light metals and their alloys
Rio de Janeiro
(Brazil)
**
TC 130
Graphic technology
Sao Paulo (Brazil)
**
TC 135/SC 9
Non-destructive testing/Acoustic emission testing
(Turkey)
**
TC 180
Solar energy
(Germany)
**
TC 244
Industrial furnaces and associated processing equipment
(China)
**
TC 282/SC 3
Water re-use/Risk and performance evaluation of water reuse systems
November 2015
2-6
(Switzerland)
**
TC 215
Health informatics
2-6
Beijing (China)
*
TC 282
Water re-use
3
Berlin (Germany)
*
TC 83
Sports and other recreational facilities and equipment
912
(Spain)
**
TC 189
Ceramic tile
913
Kobe (Japan)
*
TC 21
Equipment for fire protection and fire fighting
11
Nottingham (United
Kingdom)
*
TC 60
Gears
1113
(Malaysia)
**
TC 123
Plain bearings
1213
Kuala Lumpur
(Malaysia)
**
TC 227
Springs
16
(USA)
**
PC 252
Natural gas fuelling stations for vehicles
20-
Hong Kong (Hong
*
TC 176
Quality management and quality assurance
28
Kong, China)
(China)
**
JTC 1
Information technology
Pretoria (South
Africa)
**
TC 212
Clinical laboratory testing and in vitro diagnostic test systems
Berlin (Germany)
*
TC 44/SC 6
Welding and allied processes/Resistance welding and allied
mechanical joining
(United Arab
Emirates)
**
TC 217
Cosmetics
(Sweden)
**
TC 17/SC 1
Steel/Methods of determination of chemical composition
Madrid (Spain)
**
TC 98
Bases for design of structures
Dayton, Ohio (USA)
**
TC 159/SC 3
Ergonomics/Anthropometry and biomechanics
Tel Aviv (Israel)
**
TC 282
Water re-use
December 2015
10
4th Quarter 2015
2nd Semester 2015
Jeju (Korea,
Republic of)
**
TC 71
Concrete, reinforced concrete and pre-stressed concrete
(USA)
**
TC 171
Document management applications
(France)
**
TC 172/SC 1
Optics and photonics/Fundamental standards
Month unknown 2015
Brussels (Belgium)
**
TC 23
Tractors and machinery for agriculture and forestry
(USA)
**
TC 27
Solid mineral fuels
(USA)
**
TC 41
Pulleys and belts (including veebelts)
Berlin (Germany)
**
TC 138
Plastics pipes, fittings and valves for the transport of fluids
(Japan)
**
TC 142
Cleaning equipment for air and other gases
(China)
**
TC 155
Nickel and nickel alloys
(USA)
**
TC 197
Hydrogen technologies
**
TC 120
Leather
**
TC 213
Dimensional and geometrical product specifications and
verification
**
TC 108/SC 2
Mechanical vibration, shock and condition
January 2016
(China)
February 2016
(USA)
March 2016
14-
Sydney (Australia)
18
monitoring/Measurement and evaluation of mechanical
vibration and shock as applied to machines, vehicles and
structures
1418
Sydney (Australia)
**
TC 108/SC 5
Mechanical vibration, shock and condition
monitoring/Condition monitoring and diagnostics of machine
systems
1718
Geneva
(Switzerland)
*
COUNCIL
Council
Sydney (Australia)
**
TC 178
Lifts, escalators and moving walks
Seoul (Korea,
Republic of)
**
TC 161
Control and protective devices for gas and/or oil burners and
appliances
(Brazil)
**
TC 67/SC 4
Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries/Drilling and
production equipment
(India)
**
TC 85
Nuclear energy, nuclear technologies, and radiological
protection
(Korea, Republic of)
**
TC 122
Packaging
Stockholm (Sweden)
**
TC 130
Graphic technology
(USA)
**
TC 282/SC 3
Water re-use/Risk and performance evaluation of water reuse systems
(Germany)
**
JTC 1/SC 36
Information technology/Information technology for learning,
education and training
(Europe)
**
TC 22/SC 38
Road vehicles/Motorcycles and mopeds
**
TC 34/SC 4
Food products/Cereals and pulses
New Delhi (India)
**
TC 34/SC 7
Food products/Spices, culinary herbs and condiments
(China)
**
TC 34/SC 16
Food products/Horizontal methods for molecular biomarker
analysis
April 2016
1115
May 2016
June 2016
2nd Quarter 2016
(Germany)
1st Semester 2016
September 2016
19
Beijing (China)
*
COUNCIL
Council
2123
Beijing (China)
*
GA
General Assembly
Vienna (Austria)
**
JTC 1/SC 22
Information technology/Programming languages, their
environments and system software interfaces
Paris (France)
**
TC 17
Steel
Sao Paulo (Brazil)
**
TC 209
Cleanrooms and associated controlled environments
Shanghai (China)
**
TC 213
Dimensional and geometrical product specifications and
verification
Beijing (China)
**
TC 256
Pigments, dyestuffs and extenders
**
TC 289
Brand evaluation
London (United
Kingdom)
*
TC 58
Gas cylinders
(Brazil)
**
TC 59
Buildings and civil engineering works
(Korea, Republic of)
**
TC 201
Surface chemical analysis
(Israel)
**
TC 282/SC 3
Water re-use/Risk and performance evaluation of water reuse systems
**
JTC 1
Information technology
Delft (Netherlands)
**
TC 28
Petroleum products and related products of synthetic or
biological origin
Delft (Netherlands)
**
TC 28/SC 5
Petroleum products and related products of synthetic or
biological origin/Measurement of refrigerated hydrocarbon
and non-petroleum based liquefied gaseous fuels
Delft (Netherlands)
**
TC 28/SC 7
Petroleum products and related products of synthetic or
biological origin/Liquid Biofuels
3rd Quarter 2016
(USA)
October 2016
2021
November 2016
(Norway)
4th Quarter 2016
Month unknown 2016
(Korea, Republic of)
**
JTC 1/SC 23
Information technology/Digitally Recorded Media for
Information Interchange and Storage
(Russian Federation)
**
REMCO
Committee on reference materials
(Denmark)
**
TC 37
Terminology and other language and content resources
(South Africa)
**
TC 44
Welding and allied processes
(Malaysia)
**
TC 45
Rubber and rubber products
Wellington (New
Zealand)
**
TC 46
Information and documentation
Wellington (New
Zealand)
**
TC 46/SC 11
Information and documentation/Archives/records
management
(Sweden)
**
TC 102
Iron ore and direct reduced iron
(Japan)
**
TC 138/SC 2
Plastics pipes, fittings and valves for the transport of
fluids/Plastics pipes and fittings for water supplies
(Japan)
**
TC 183
Copper, lead, zinc and nickel ores and concentrates
**
JTC 1/SC 36
Information technology/Information technology for learning,
education and training
London (United
Kingdom)
**
JTC 1/SC 22
Information technology/Programming languages, their
environments and system software interfaces
New Delhi (India)
**
TC 178
Lifts, escalators and moving walks
**
TC 289
Brand evaluation
**
JTC 1/SC 36
Information technology/Information technology for learning,
education and training
June 2017
(Australia)
September 2017
3rd Quarter 2017
Vienna (Austria)
June 2018
(Korea, Republic of)