ISO Update
Supplement to ISOfocus
April 2015
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International
Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been
reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The
DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 March to 31 March 2015
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 4
Rolling bearings
ISO/CD 200561
Rolling bearings — Load ratings for hybrid bearings with rolling elements made of ceramic — Part 1: Dynamic load ratings
TC 12
Quantities and units
ISO/CD 800032
Physiological quantities and their units — Part 2: Physics
ISO/CD 800033
Physiological quantities and their units — Part 3: Chemistry
TC 23
Tractors and machinery for agriculture and forestry
ISO/CD 20112
Tractors and machinery for agriculture and forestry - Camera interface between tractor and implement
TC 29
Small tools
ISO/CD 1085
Assembly tools for screws and nuts — Double-ended wrenches — Size pairing
ISO/CD 3318
Assembly tools for screws and nuts — Double-headed open-ended wrenches, double-headed box wrenches and combination wrenches — Maximum widths of heads
ISO/CD 4229
Assembly tools for screws and nuts — Single-head engineer's wrenches for lower torque applications — Maximum outside
dimensions of heads and test torques
TC 43
Acoustics
ISO/CD 172082
Underwater acoustics — Quantities and procedures for description and measurement of underwater noise from ships —
Part 2: Determination of source levels
TC 44
Welding and allied processes
ISO/CD 3580
Welding consumables — Covered electrodes for manual metal arc welding of creep-resisting steels — Classification
ISO/CD 17633
Welding consumables — Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of
stainless and heat-resisting steels — Classification
ISO/CD 20378
Welding consumables — Rods for gas welding of non alloy and creep resisting steels — Classification
TC 45
Rubber and rubber products
ISO/CD 199841
Rubber and rubber products — Determination of biobased content — Part 1: General principles and calculation methods
using formulation
ISO/CD 199842
Rubber and rubber products — Determination of biobased content — Part 2: Biobased carbon content
ISO/CD 199843
Rubber and rubber products — Determination of biobased content — Part 3: Biobased mass content
ISO/CD 20163
Vulcanized rubber — Determination of free sulfur by gaz-phase chromatography (GC) and high performance liquid chromatography (HPLC)
TC 46
Information and documentation
ISO/DTS
18344
Effectiveness of paper deacidification processes
TC 54
Essential oils
ISO/CD 19817
Essential oil of thyme [Thymus vulgaris L.]
TC 61
Plastics
ISO/CD 9994
Lighters — Safety specification
ISO/CD 22702
Utility lighters — General consumer-safety requirements
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO/CD 4037-1
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a
function of photon energy — Part 1: Radiation characteristics and production methods
ISO/CD 4037-2
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a
function of photon energy — Part 2: Dosimetry for radiation protection over the energy ranges from 8 keV to 1,3 MeV and 4
MeV to 9 MeV
ISO/CD 4037-3
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a
function of photon energy — Part 3: Calibration of area and personal dosemeters and the measurement of their response as
a function of energy and angle of incidence
ISO/CD 4037-4
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a
function of photon energy — Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields
ISO/CD 19581
Measurement of radioactivity — Gamma emitting radionuclides — Rapid test method using NaI(Tl) gamma-ray spectrometry
TC 89
Wood-based panels
ISO/CD 27769
Wood-based panels — Wet-process fibreboard
TC 108
Mechanical vibration, shock and condition monitoring
ISO/CD 1606317
Methods for the calibration of vibration and shock transducers — Part 17: Primary calibration by centrifuge
TC 121
Anaesthetic and respiratory equipment
ISO/CD 806012-55
Medical electrical equipment — Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors
TC 123
Plain bearings
ISO/CD 20054
Plain bearings — Bearings containing dispersed solid lubricants
TC 130
Graphic technology
ISO/CD 13655
Graphic technology — Spectral measurement and colorimetric computation for graphic arts images
TC 131
Fluid power systems
ISO/DTS
13725
Hydraulic fluid power — Method for evaluating cylinder buckling
load
TC 147
Water quality
ISO/CD 566712
Water quality — Sampling — Part 12: Guidance on sampling of bottom sediments
TC 150
Implants for surgery
ISO/DTR
19024
Evaluation of CPB devices relative to their capabilities of reducing the transmission of Gaseous MicroEmboli(GME)to a
patient during cardiopulmonary bypass
TC 181
Safety of toys
ISO 81241:2014/CD
Amd 3
Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 3: Warnings and fibrous filling material
TC 184
Automation systems and integration
ISO/CD 157462
Automation systems and integration — Integration of advanced process control and optimization capabilities for manufacturing systems — Part 2: Activity models and information exchange
TC 193
Natural gas
ISO/DTR
29922
Natural Gas — Supporting information on the calculation of physical properties according to ISO 6976
TC 197
Hydrogen technologies
ISO/CD 198802
Gaseous hydrogen — Fueling stations — Part 2: Dispensers
ISO/CD 198803
Gaseous hydrogen — Fueling stations — Part 3: Valves
TC 204
Intelligent transport systems
ISO/CD 171852
Intelligent transport systems — Public transport user information — Part 2: Data and interface standards catalogue and
cross reference
TC 206
Fine ceramics
ISO/CD 19606
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for surface roughness of fine ceramic
films by atomic force microscopy
TC 207
Environmental management
ISO/CD 14052
Environmental management - Material flow cost accounting - Guidance for practical implementation in a supply chain
TC 217
Cosmetics
ISO/DTR
19838
Microbiology — Cosmetics – Guidelines for the application of ISO standards on Cosmetic Microbiology
TC 260
Human resource management
ISO/DTR
30406
Management by sustainable employability of staff
TC 265
Carbon dioxide capture, transportation, and geological storage
ISO/DTR
27912
Carbon dioxide capture — Carbon dioxide capture systems, technologies and processes
JTC 1
Information technology
ISO/IEC CD
20246
Software and Systems Engineering — Work Product Reviews
ISO/IEC PDTR
19566-1
Information technologies — JPEG Systems — Part 1: File format and file structure
ISO/IEC CD
24751-1
Information technology — Individualized adaptability and accessibility in e-learning, education and training — Part 1:
Framework and reference model
ISO/IEC CD
19794-15
Information technology — Biometric data interchange format — Part 15: Palm crease image data
ISO/IEC CD
29794-4
Information technology — Biometric sample quality — Part 4: Finger image data
ISO/IEC CD
30107-2
Information Technology — Biometric presentation attack detection — Part 2: Data formats
ISO/IEC CD
30134-4
Information Technology — Data Centres — Key performance indicators — Part 4: IT Equipment Energy Efficiency for Servers (ITEE)
ISO/IEC PDTR
20000-10
Information technology — Service management — Part 10: Concepts and terminology
ISO/IEC PDTR
38504
Information technology — Governance of IT — The structure of principles-based standards in the governance of information
technology
DIS circulated
Period from 01 March to 31 March 2015
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 4
ISO/DIS
3245.3
Rolling bearings
*
Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
(Revision of ISO 3245:2007)
TC 8
Ships and marine technology
2015-05-20
ISO/DIS 484-2
*
Shipbuilding — Ship screw propellers — Manufacturing tolerances — Part 2: Propellers of
diameter between 0,80 and 2,50 m inclusive
2015-07-01
(Revision of ISO 484-2:1981)
ISO/DIS
17905.2
Ships and marine technology - Installation, inspection and maintenance of container securing devices for ships
TC 10
Technical product documentation
ISO/DIS
15787.2
*
Technical product documentation — Heat-treated ferrous parts — Presentation and indications
2015-05-10
2015-06-19
(Revision of ISO 15787:2001)
TC 20
ISO/DIS 12208
Aircraft and space vehicles
*
Space systems — Space environment (natural and artificial) — Observed proton fluences
over long duration at GEO and guideline for selection of confidence level in statistical model
of solar proton fluences
2015-06-20
(Revision of ISO/TS 12208:2011)
TC 22
ISO/DIS
11898-1
Road vehicles
*
Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical
signalling
2015-06-27
(Revision of ISO 11898-1:2003, ISO 11898-1:2003/Cor 1:2006)
ISO/DIS
15765-2
*
Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part
2: Transport protocol and network layer services
2015-06-20
(Revision of ISO 15765-2:2011)
ISO/DIS
15765-4
*
Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part
4: Requirements for emissions-related systems
2015-06-20
(Revision of ISO 15765-4:2011, ISO 15765-4:2011/Amd 1:2013)
ISO/DIS
22901-3
*
TC 24
ISO/DIS 19430
Road vehicles — Open diagnostic data exchange (ODX) — Part 3: Fault symptom exchange description (FXD)
2015-06-20
Particle characterization including sieving
*
Determination of particle size distribution — Particle tracking analysis
2015-06-24
TC 38
ISO/DIS 18264
Textiles
*
Textile slings — Lifting slings for general purpose lifting operations made from fibre ropes —
High Modulus PolyEthylene (HMPE)
TC 43
Acoustics
ISO/DIS
9296.2
Acoustics — Declared noise emission values of information technology and telecommunications equipment
(Revision of ISO 9296:1988)
TC 44
ISO/DIS 17672
Welding and allied processes
*
Brazing — Filler metals
2015-06-20
2015-05-24
2015-06-20
(Revision of ISO 17672:2010)
ISO/DIS 3581
*
Welding consumables — Covered electrodes for manual metal arc welding of stainless and
heat-resisting steels — Classification
2015-06-20
(Revision of ISO 3581:2003, ISO 3581:2003/Cor 1:2008, ISO 3581:2003/Amd 1:2011)
ISO/DIS 17637
*
Non-destructive testing of welds — Visual testing of fusion-welded joints
2015-06-20
(Revision of ISO 17637:2003)
ISO/DIS 17638
*
Non-destructive testing of welds — Magnetic particle testing
2015-06-20
(Revision of ISO 17638:2003)
ISO/DIS 10656
*
Resistance welding equipment — Transformers — Integrated transformers for welding guns
2015-06-24
(Revision of ISO 10656:1996, ISO 10656:1996/Cor 1:2000)
TC 45
ISO/DIS 6802
Rubber and rubber products
*
Rubber and plastics hoses and hose assemblies with wire reinforcements — Hydraulic
impulse test with flexing
2015-06-20
(Revision of ISO 6802:2005)
ISO/DIS 7233
*
Rubber and plastics hoses and hose assemblies — Determination of resistance to vacuum
2015-06-20
(Revision of ISO 7233:2006)
ISO/DIS 7326
*
Rubber and plastics hoses — Assessment of ozone resistance under static conditions
2015-06-27
(Revision of ISO 7326:2006)
ISO/DIS 8331
*
Rubber and plastics hoses and hose assemblies — Guidelines for selection, storage, use
and maintenance
2015-06-20
(Revision of ISO 8331:2014)
ISO/DIS 1304
*
Rubber compounding ingredients — Carbon black — Determination of iodine adsorption
number
2015-06-24
(Revision of ISO 1304:2006)
ISO/DIS 22862
*
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods
for determination of total mass per unit area, mass per unit area of coating and mass per
unit area of substrate
2015-06-20
(Revision of ISO 2286-2:1998)
ISO/DIS 22863
*
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 3: Method
for determination of thickness
(Revision of ISO 2286-3:1998)
TC 61
Plastics
2015-06-20
ISO/DIS 45861
*
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins
(Usually called Laminates) — Part 1: Introduction and general information
2015-06-03
(Revision of ISO 4586-1:2004)
ISO/DIS 45862
*
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins
(Usually called Laminates) — Part 2: Determination of properties
2015-06-03
(Revision of ISO 4586-2:2004)
ISO/DIS 45863
*
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins
(Usually called Laminates) — Part 3: Classification and specifications for laminates less
than 2 mm thick and intended for bonding to supporting substrates
2015-06-03
(Revision of ISO 4586-1:2004)
ISO/DIS 45864
*
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins
(Usually called Laminates) — Part 4: Classification and specifications for compact laminates
of thickness 2 mm and greater
2015-06-03
(Revision of ISO 4586-1:2004)
ISO/DIS 45865
*
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins
(Usually called Laminates) — Part 5: Classification and specifications for flooring grade
laminates less than 2 mm thick intended for bonding to supporting substrates
2015-06-03
(Revision of ISO 4586-1:2004)
ISO/DIS 45866
*
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins
(Usually called Laminates) — Part 6: Classification and specifications for exterior-grade
compact laminates of thickness 2 mm and greater
2015-06-03
(Revision of ISO 4586-1:2004)
ISO/DIS 45867
*
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins
(Usually called Laminates) — Part 7: Classification and specifications for design laminates
2015-06-03
(Revision of ISO 4586-1:2004)
ISO/DIS 45868
*
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins
(Usually called Laminates) — Part 8: Classification and specifications for alternative core
laminates
2015-06-03
(Revision of ISO 4586-1:2004)
TC 67
ISO/DIS
16530-1
Materials, equipment and offshore structures for petroleum, petrochemical
and natural gas industries
*
2015-06-20
TC 68
ISO/DIS 95644.2
Petroleum and natural gas industries — Well integrity — Part 1: Life cycle governance
Financial services
*
Financial services — Personal Identification Number (PIN) management and security —
Part 4: Requirements for PIN handling in eCommerce for Payment Transactions
2015-05-13
(Revision of ISO/TR 9564-4:2004)
TC 107
ISO/DIS 18535
ISO/DIS 19477
Metallic and other inorganic coatings
*
*
Diamond-like carbon films — Determination of friction and wear characteristics of diamondlike carbon films by ball-on-disc method
2015-06-20
Metallic and other inorganic coatings — Measurement of Young's modulus of thermal barrier coatings by beam bending
2015-06-24
TC 110
ISO/DIS
10896-2
Industrial trucks
*
2015-06-27
TC 114
ISO/DIS 19235
Rough-terrain trucks — Safety requirements and verification — Part 2: Slewing trucks
Horology
*
Analogue quartz clocks — Timing Accuracy
2015-06-24
TC 138
ISO/DIS
16486-4
Plastics pipes, fittings and valves for the transport of fluids
*
TC 145
ISO/DIS
28564-2
*
Public information guidance systems — Part 2: Design principles and requirements for location signs and direction signs
2015-06-27
Air quality
*
TC 150
ISO/DIS 58321
2015-06-29
Graphical symbols
TC 146
ISO/DIS
12219-6
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U)
piping systems with fusion jointing and mechanical jointing — Part 4: Valves
Interior air of road vehicles — Part 6: Method for the determination of the emissions of semivolatile organic compounds from vehicle interior parts and materials at higher temperature
— Small chamber method
2015-06-27
Implants for surgery
*
Implants for surgery — Metallic materials — Part 1: Wrought stainless steel
2015-06-24
(Revision of ISO 5832-1:2007, ISO 5832-1:2007/Cor 1:2008)
ISO/DIS 58323
*
Implants for surgery — Metallic materials — Part 3: Wrought titanium 6-aluminium 4vanadium alloy
2015-07-03
(Revision of ISO 5832-3:1996)
TC 193
ISO/DIS 6976
Natural gas
*
Natural gas — Calculation of calorific values, density, relative density and Wobbe indices
from composition
2015-06-20
(Revision of ISO 6976:1995, ISO 6976:1995/Cor 1:1997, ISO 6976:1995/Cor 2:1997, ISO
6976:1995/Cor 3:1999)
TC 201
ISO/DIS 18516
Surface chemical analysis
*
Surface chemical analysis — Determination of lateral resolution and sharpness in beam
based methods
2015-06-03
(Revision of ISO 18516:2006)
TC 211
ISO/DIS 19119
Geographic information/Geomatics
*
Geographic information — Services
2015-06-20
(Revision of ISO 19119:2005, ISO 19119:2005/Amd 1:2008)
TC 226
ISO/DIS 19950
Materials for the production of primary aluminium
*
Aluminium oxide primarily used for the production of aluminium — Determination of alpha
alumina content — Method using X-ray diffraction net peak areas
TC 249
ISO/DIS
18668-1
Traditional chinese medicine
*
Coding System of Chinese Medicines — Part 1: Coding Rules for Chinese Medicines
2015-06-20
JTC 1
ISO/IEC DIS
8824-1
2015-06-03
Information technology
*
Information technology — Abstract Syntax Notation One (ASN.1): Specification of basic
notation — Part 1:
2015-06-24
(Revision of ISO/IEC 8824-1:2008, ISO/IEC 8824-1:2008/Cor 1:2012, ISO/IEC 88241:2008/Cor 2:2014)
ISO/IEC DIS
8824-2
*
Information technology — Abstract Syntax Notation One (ASN.1): Information object specification — Part 2:
2015-06-24
(Revision of ISO/IEC 8824-2:2008, ISO/IEC 8824-2:2008/Cor 1:2012)
ISO/IEC DIS
8824-3
*
Information technology — Abstract Syntax Notation One (ASN.1): Constraint specification
— Part 3:
2015-06-24
(Revision of ISO/IEC 8824-3:2008, ISO/IEC 8824-3:2008/Cor 1:2014)
ISO/IEC DIS
8824-4
*
Information technology — Abstract Syntax Notation One (ASN.1): Parameterization of
ASN.1 specifications — Part 4:
2015-06-24
(Revision of ISO/IEC 8824-4:2008, ISO/IEC 8824-4:2008/Cor 1:2014)
ISO/IEC DIS
8825-1
*
Information technology — ASN.1 encoding rules: Specification of Basic Encoding Rules
(BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER) — Part
1:
2015-06-24
(Revision of ISO/IEC 8825-1:2008, ISO/IEC 8825-1:2008/Cor 1:2012, ISO/IEC 88251:2008/Cor 2:2014)
ISO/IEC DIS
8825-2
*
Information technology — ASN.1 encoding rules: Specification of Packed Encoding Rules
(PER) — Part 2:
2015-06-24
(Revision of ISO/IEC 8825-2:2008, ISO/IEC 8825-2:2008/Cor 1:2012, ISO/IEC 88252:2008/Cor 2:2012)
ISO/IEC DIS
8825-3
*
Information technology — ASN.1 encoding rules: Specification of Encoding Control Notation
(ECN) — Part 3:
2015-06-24
(Revision of ISO/IEC 8825-3:2008, ISO/IEC 8825-3:2008/Cor 1:2012)
ISO/IEC DIS
8825-4
*
Information technology — ASN.1 encoding rules: XML Encoding Rules (XER) — Part 4:
2015-06-24
(Revision of ISO/IEC 8825-4:2008, ISO/IEC 8825-4:2008/Cor 1:2012, ISO/IEC 88254:2008/Cor 2:2014)
ISO/IEC DIS
8825-5
*
Information technology — ASN.1 encoding rules: Mapping W3C XML schema definitions
into ASN.1 — Part 5:
2015-06-24
(Revision of ISO/IEC 8825-5:2008, ISO/IEC 8825-5:2008/Cor 1:2012, ISO/IEC 88255:2008/Cor 2:2014)
ISO/IEC/IEEE
DIS 24748-4.2
*
Systems and software engineering — Life cycle management — Part 4: Systems engineering planning
(Revision of ISO/IEC 26702:2007)
2015-05-14
ISO/IEC DIS
17760-102
*
ISO/IEC DIS
27000
*
Information technology — AT Attachment — Part 102: ATA/ATAPI Command set - 2 (ACS2)
2015-06-24
Information technology — Security techniques — Information security management systems
— Overview and vocabulary
2015-06-20
(Revision of ISO/IEC 27000:2014)
ISO/IEC
1449610:2014/DAmd
1
*
ISO/IEC
230018:2013/DAmd
2
*
Information technology — Coding of audio-visual objects — Part 10: Advanced Video Coding — Amendment 1: Multi-Resolution frame compatible stereoscopic video with depth
maps
2015-06-20
Information technology — MPEG systems technologies — Part 8: Coding-independent code
points — Amendment 2: Sample aspect ratio and additional transfer functions, colour primaries and matrix coefficients
2015-06-20
FDIS circulated
Period from 01 March to 31 March 2015
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 20
ISO/FDIS
16682
Aircraft and space vehicles
*
2015-05-07
TC 34
ISO/FDIS
11085
Aerospace series — Terminology for clamping devices
Food products
*
Cereals, cereals-based products and animal feeding stuffs — Determination of crude fat
and total fat content by the Randall extraction method
2015-05-13
(Revision of ISO 11085:2008)
ISO/FDIS
21415-2
*
Wheat and wheat flour — Gluten content — Part 2: Determination of wet gluten and gluten
index by mechanical means
2015-05-13
(Revision of ISO 21415-2:2006)
ISO/FDIS
16140-1
*
Microbiology of the food chain — Method validation — Part 1: Vocabulary
2015-05-20
(Revision of ISO 16140:2003, ISO 16140:2003/Amd 1:2011)
ISO/FDIS
16140-2
*
Microbiology of the food chain — Method validation — Part 2: Protocol for the validation of
alternative (proprietary) methods against a reference method
2015-05-20
(Revision of ISO 16140:2003, ISO 16140:2003/Amd 1:2011)
ISO/FDIS
17468
*
TC 39
ISO/FDIS
18217
2015-05-20
Machine tools
*
Safety of woodworking machines — Edge-banding machines fed by chain(s)
2015-05-27
TC 41
ISO/FDIS 9563
Microbiology of the food chain — Technical requirements and guidance on establishment or
revision of standard methods
Pulleys and belts (including veebelts)
*
Belt drives — Electrical conductivity of antistatic endless synchronous belts — Characteristics and test method
2015-05-31
(Revision of ISO 9563:1990)
TC 44
ISO/FDIS
17643
Welding and allied processes
*
Non-destructive testing of welds — Eddy current testing of welds by complex-plane analysis
2015-05-20
(Revision of ISO 17643:2005)
TC 45
ISO/FDIS 1125
Rubber and rubber products
*
Rubber compounding ingredients — Carbon black — Determination of ash
2015-05-20
(Revision of ISO 1125:1999, ISO 1125:1999/Amd 1:2011)
ISO/FDIS 1658
*
Natural rubber (NR) — Evaluation procedure
2015-05-20
(Revision of ISO 1658:2009)
TC 58
ISO/FDIS
17871
Gas cylinders
*
2015-05-27
TC 61
ISO/FDIS
22007-2
Gas cylinders — Quick release cylinder valves — Specification and type testing
Plastics
*
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient
plane heat source (hot disc) method
2015-05-20
(Revision of ISO 22007-2:2008)
TC 67
ISO/FDIS
24817
Materials, equipment and offshore structures for petroleum, petrochemical
and natural gas industries
*
Petroleum, petrochemical and natural gas industries — Composite repairs for pipework —
Qualification and design, installation, testing and inspection
2015-05-06
(Revision of ISO/TS 24817:2006)
TC 70
ISO/FDIS
8178-7
Internal combustion engines
*
Reciprocating internal combustion engines — Exhaust emission measurement — Part 7:
Engine family determination
2015-05-17
(Revision of ISO 8178-7:1996)
ISO/FDIS
8178-8
*
Reciprocating internal combustion engines — Exhaust emission measurement — Part 8:
Engine group determination
2015-05-31
(Revision of ISO 8178-8:1996)
TC 87
ISO/FDIS 2385
Cork
*
Packed cork — Virgin cork, raw reproduction cork, ramassage, cleanings, cleanings, burnt
cork, boiled reproduction cork and raw corkwaste — Sampling to determine moisture content
2015-05-17
(Revision of ISO 2385:1993)
ISO/FDIS 2386
*
Packed cork — Virgin cork, raw reproduction cork, ramassage, cleanings, burnt cork, boiled
reproduction cork and raw corkwaste — Determination of moisture content
2015-05-17
(Revision of ISO 2386:1998)
TC 102
ISO/FDIS
4689-2
Iron ore and direct reduced iron
*
Iron ores — Determination of sulfur content — Part 2: Combustion/titration method
2015-05-07
(Revision of ISO 4689-2:2004)
ISO/FDIS
4689-3
*
Iron ores — Determination of sulfur content — Part 3: Combustion/infrared method
2015-05-07
(Revision of ISO 4689-3:2004)
ISO/FDIS
10203
*
Iron ores — Determination of calcium — Flame atomic absorption spectrometric method
2015-05-07
(Revision of ISO 10203:2006)
ISO/FDIS
10204
*
Iron ores — Determination of magnesium — Flame atomic absorption spectrometric method
2015-05-07
(Revision of ISO 10204:2006)
ISO/FDIS
11536
*
ISO/FDIS
15633
*
Iron ores — Determination of loss on ignition — Gravimetric method
2015-05-28
Iron ores — Determination of nickel — Flame atomic absorption spectrometric method
2015-05-07
(Revision of ISO 15633:2009)
ISO/FDIS
15634
*
Iron ores — Determination of chromium content — Flame atomic absorption spectrometric
method
2015-05-07
(Revision of ISO 15634:2005)
TC 106
ISO/FDIS 4823
Dentistry
*
Dentistry — Elastomeric impression materials
2015-05-20
(Revision of ISO 4823:2000, ISO 4823:2000/Cor 1:2004, ISO 4823:2000/Amd 1:2007)
TC 110
ISO/FDIS
11525-5.2
Industrial trucks
*
TC 118
2015-05-07
Compressors and pneumatic tools, machines and equipment
ISO 289275:2009/FDAmd
1
*
ISO 289278:2009/FDAmd
1
*
TC 121
ISO/FDIS
23747
Rough-terrain trucks — User requirements — Part 5: Interface between rough-terrain truck
and integrated personnel work platform
Hand-held portable power tools — Test methods for evaluation of vibration emission — Part
5: Drills and impact drills — Amendment 1
Hand-held portable power tools — Test methods for evaluation of vibration emission — Part
8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action — Amendment 1: Polishing machines, modified feed forces
2015-05-06
2015-05-06
Anaesthetic and respiratory equipment
*
Anaesthetic and respiratory equipment — Peak expiratory flow meters for the assessment
of pulmonary function in spontaneously breathing humans
2015-05-13
(Revision of ISO 23747:2007)
IEC/FDIS
80601-2-71
Medical electrical equipment — Part 2-71: Particular requirements for the basic safety and
essential performance of functional Near-Infrared Spectroscopy (NIRS) equipment
TC 131
Fluid power systems
ISO/FDIS
10771-1
*
Hydraulic fluid power — Fatigue pressure testing of metal pressure-containing envelopes —
Part 1: Test method
2015-05-23
2015-05-19
(Revision of ISO 10771-1:2002)
TC 138
ISO/FDIS
15494
Plastics pipes, fittings and valves for the transport of fluids
*
Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE),
polyethylene of raised temperature resistance (PERT), crosslinked polyethylene (PE-X),
polypropylene (PP) — Metric series for specifications for components and the system
2015-05-13
(Revision of ISO 15494:2003)
TC 150
ISO/FDIS
12891-1
Implants for surgery
*
Retrieval and analysis of surgical implants — Part 1: Retrieval and handling
2015-05-28
(Revision of ISO 12891-1:2011)
TC 157
ISO/FDIS 4074
Non-systemic contraceptives and STI barrier prophylactics
*
Natural rubber latex male condoms — Requirements and test methods
2015-06-13
(Revision of ISO 4074:2014)
TC 158
ISO/FDIS
6142-1
Analysis of gases
*
Gas analysis — Preparation of calibration gas mixtures — Part 1: Gravimetric method for
Class I mixtures
2015-05-19
(Revision of ISO 6142:2001, ISO 6142:2001/Amd 1:2009)
TC 163
ISO/FDIS 9972
Thermal performance and energy use in the built environment
*
Thermal performance of buildings — Determination of air permeability of buildings — Fan
pressurization method
2015-05-20
(Revision of ISO 9972:2006, ISO 9972:2006/Amd 1:2009)
TC 172
ISO/FDIS
10110-5
Optics and photonics
*
Optics and photonics — Preparation of drawings for optical elements and systems — Part
5: Surface form tolerances
2015-05-17
(Revision of ISO 10110-5:2007)
ISO/FDIS
10110-6.2
*
Optics and photonics — Preparation of drawings for optical elements and systems — Part
6: Centring tolerances
2015-05-17
(Revision of ISO 10110-6:1996, ISO 10110-6:1996/Cor 1:1999)
ISO/FDIS
10110-19
*
ISO/FDIS
14999-4
*
Optics and photonics — Preparation of drawings for optical elements and systems — Part
19: General description of surfaces and components
2015-05-17
Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 4: Interpretation and evaluation of tolerances specified in ISO 10110
2015-05-17
(Revision of ISO 14999-4:2007)
ISO
8624:2011/FD
Amd 1
*
TC 188
ISO/FDIS
19009
*
Soil quality
*
Soil quality — Risk-based petroleum hydrocarbons — Part 1: Determination of aliphatic and
aromatic fractions of volatile petroleum hydrocarbons using gas chromatography (static
headspace method)
2015-05-13
Safety of machinery
*
TC 204
ISO/FDIS
11067
Small craft — Electric navigation lights — Performance of LED lights
2015-05-13
TC 199
ISO 138491:2006/FDAmd
1
2015-05-20
Small craft
TC 190
ISO/FDIS
16558-1
Ophthalmic optics — Spectacle frames — Measuring system and terminology — Amendment 1
Safety of machinery — Safety-related parts of control systems — Part 1: General principles
for design — Amendment 1
2015-05-20
Intelligent transport systems
*
Intelligent transport systems — Curve speed warning systems (CSWS) — Performance
requirements and test procedures
TC 210
Quality management and corresponding general aspects for medical devices
IEC
62304:2006/F
DAmd 1
Medical device software — Software life cycle processes — Amendment 1
TC 234
Fisheries and aquaculture
2015-05-07
2015-05-23
ISO/FDIS
16488
*
ISO/FDIS
16541
*
Marine finfish farms — Open net cage — Design and operation
2015-05-19
Methods for sea lice surveillance on marine finfish farms
2015-05-19
ISO/FDIS
18538
*
TC 254
ISO/FDIS
17842-1
*
Safety of amusement rides and amusement devices — Part 1: Design and manufacture
2015-05-17
Evaluation of energy savings
*
Energy efficiency and savings calculation for countries, regions and cities
2015-05-03
TC 282
ISO/FDIS
16075-1
2015-05-19
Safety of amusement rides and amusement devices
TC 257
ISO/FDIS
17742.2
Traceability of molluscan products — Specifications on the information to be recorded in
farmed molluscan distribution chains
Water re-use
*
Guidelines for treated wastewater use for irrigation projects — Part 1: The basis of a reuse
project for irrigation
2015-05-10
(Revision of ISO/CD 16075-2)
ISO/FDIS
16075-2
*
ISO/FDIS
16075-3
*
CASCO
ISO/IEC FDIS
17021-1
Guidelines for treated wastewater use for irrigation projects — Part 2: Development of the
project
2015-05-10
Guidelines for treated wastewater use for irrigation projects — Part 3: Components of a
reuse project for irrigation
2015-05-10
Committee on conformity assessment
*
Conformity assessment — Requirements for bodies providing audit and certification of
management systems — Part 1: Requirements
2015-05-06
(Revision of ISO/IEC 17021:2011)
JTC 1
ISO/IEC FDIS
29157
Information technology
*
Information technology — Telecommunications and information exchange between systems
— PHY/MAC specifications for short-range wireless low-rate applications in the ISM band
2015-05-07
(Revision of ISO/IEC 29157:2010)
ISO/IEC FDIS
19770-5
*
Information technology — IT asset management — Overview and vocabulary — Part 5:
2015-05-07
(Revision of ISO/IEC 19770-5:2013)
ISO/IEC
156933:2009/FDAmd
2
*
ISO/IEC
156933:2009/FDAmd
3
*
2015-05-25
Identification cards — Contactless integrated circuit cards — Vicinity cards — Part 3: Anticollision and transmission protocol — Amendment 3: Extended VICC memory organisation
2015-05-07
Information technology — Home Electronic Systems (HES) architecture — Part 4-3: Application layer interface to lower communications layers for network enhanced control devices
of HES Class 1
ISO/IEC FDIS
14543-4-3
ISO/IEC FDIS
27041
Identification cards — Contactless integrated circuit cards — Vicinity cards — Part 3: Anticollision and transmission protocol — Amendment 2: Clarification of use of Data Elements
*
Information technology — Security techniques — Guidance on assuring suitability and adequacy of incident investigative method
2015-05-28
2015-05-07
ISO/IEC FDIS
27042
*
ISO/IEC
138181/FDAmd 2
*
ISO/IEC
230018:2013/FDAmd
1
*
ISO/IEC FDIS
23001-11
*
2015-05-07
Information technology — Generic coding of moving pictures and associated audio information — Part 1: Systems — Amendment 2: Delivery of timeline for external data
2015-05-17
Information technology — MPEG systems technologies — Part 8: Coding-independent code
points — Amendment 1: New audio code points
2015-05-19
Information technology — MPEG systems technologies — Part 11: Energy-efficient media
consumption (green metadata)
2015-05-14
Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 1: Media
presentation description and segment formats — Amendment 2: Spatial relationship description, generalized URL parameters and other extensions
ISO/IEC
230091:2014/FDAmd
2
ISO/IEC FDIS
15944-2
Information technology — Security techniques — Guidelines for the analysis and interpretation of digital evidence
*
Information technology — Business Operational View — Part 2: Registration of scenarios
and their components as business objects
2015-05-19
2015-05-17
(Revision of ISO/IEC 15944-2:2006)
ISO/IEC FDIS
15944-9
*
ISO/IEC FDIS
19763-5
*
Information technology — Business Operational View — Part 9: Business transaction traceability framework for commitment exchange
2015-05-17
Information technology — Metamodel framework for interoperability (MFI)
Metamodel for process model registration
2015-05-20
— Part 5:
ISO/IEC
197942:2011/FDAmd
2
Information technology — Biometric data interchange formats — Part 2: Finger minutiae
data — Amendment 2: XML encoding and clarification of defects
2015-05-19
ISO/IEC
197944:2011/FDAmd
2
Information technology — Biometric data interchange formats — Part 4: Finger image data
— Amendment 2: XML encoding and clarification of defects
2015-05-27
Information technology — Biometric data interchange formats — Part 7: Signature/sign time
series data — Amendment 1: XML encoding
2015-05-27
Information technology — Biometric data interchange formats — Part 9: Vascular image
data — Amendment 2: XML Encoding and clarification of defercts
2015-05-27
ISO/IEC
197947:2014/FDAmd
1
ISO/IEC
197949:2011/FDAmd
2
*
Standards published
New International Standards published between 01 March and 31 March 2015
* Available in English only
** French version of standard previously published in English only
Price group
IIW
International Institute of Welding
ISO
14373:2015
Resistance welding — Procedure for spot welding of uncoated and coated low carbon
steels
TC 8
Ships and marine technology
ISO 280071:2015
*
ISO 9876:2015
*
Ships and marine technology — Guidelines for Private Maritime Security Companies
(PMSC) providing privately contracted armed security personnel (PCASP) on board ships
(and pro forma contract) — Part 1: General
C
D
Ships and marine technology — Marine facsimile receivers for meteorological charts
B
ISO
15016:2015
*
ISO
22554:2015
*
ISO
17941:2015
*
H
Ships and marine technology — Propeller shaft revolution indicators — Electric type and
electronic type
B
Ships and marine technology — Hydraulic hinged watertight fireproof doors
B
TC 17
ISO
16573:2015
Ships and marine technology — Guidelines for the assessment of speed and power performance by analysis of speed trial data
Steel
*
Steel — Measurement method for the evaluation of hydrogen embrittlement resistance of
high strength steels
ISO
16124:2015
Steel wire rod — Dimensions and tolerances
TC 20
Aircraft and space vehicles
ISO
16694:2015
B
B
*
TC 22
Space systems — The measured parameters at firing bench and flight tests of liquid rocket
engines
C
Road vehicles
ISO 88205:2015
*
ISO 882010:2015
*
ISO 66214:2015
*
ISO/TR
*
Road vehicles — Fuse-links — Part 5: Fuse-links with axial terminals (Strip fuse-links)
Types SF 30 and SF 51 and test fixtures
C
Road vehicles — Fuse-links — Part 10: Fuse-links with tabs Type L (high current miniature)
B
Internal combustion engines — Piston rings — Part 4: General specifications
E
Road vehicles — Test procedures for evaluating child restraint system interactions with
14645:2015
ISO
12617:2015
deploying air bags
*
C
Road vehicles — Liquefied natural gas (LNG) refuelling connector — 3,1 MPa connector
C
TC 23
Tractors and machinery for agriculture and forestry
ISO 161221:2015
Agricultural and forestry machinery — Inspection of sprayers in use — Part 1: General
ISO 161222:2015
Agricultural and forestry machinery — Inspection of sprayers in use — Part 2: Horizontal
boom sprayers
C
ISO 161223:2015
Agricultural and forestry machinery — Inspection of sprayers in use — Part 3: Sprayers for
bush and tree crops
C
ISO 161224:2015
Agricultural and forestry machines — Inspection of sprayers in use — Part 4: Fixed and
semi-mobile sprayers
D
ISO 242531:2015
Crop protection equipment — Spray deposition test for field crop — Part 1: Measurement in
a horizontal plane
D
ISO 242532:2015
Crop protection equipment — Spray deposition test for field crop — Part 2: Measurement in
a crop
D
TC 29
Small tools
ISO 17111:2015
Assembly tools for screws and nuts — Technical specifications — Part 1: Hand-operated
wrenches and sockets
A
ISO 17112:2015
Assembly tools for screws and nuts — Technical specifications — Part 2: Machine-operated
sockets (impact)
A
Assembly tools for screws and nuts — Square drive sockets — Part 1: Hand-operated
sockets
B
Assembly tools for screws and nuts — Square drive sockets — Part 2: Machine-operated
sockets ("impact")
B
Assembly tools for screws and nuts — Square drive sockets — Part 3: Machine-operated
sockets ("non-impact")
A
B
ISO 27251:2015
*
ISO 27252:2015
*
ISO 27253:2015
*
TC 34
Food products
ISO
11056:1999/A
md 2:2015
Sensory analysis — Methodology — Magnitude estimation method — Amendment 2
ISO
29842:2011/A
md 1:2015
XZ
*
Sensory analysis — Methodology — Balanced incomplete block designs — Amendment 1
XZ
ISO/TS 215693:2015
Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 3: Construct-specific
real-time PCR method for detection of P35S-pat-sequence for screening genetically modified organisms
TC 37
Terminology and other language and content resources
B
ISO/TS 246201:2015
*
Language resource management — Controlled natural language (CNL) — Part 1: Basic
concepts and principles
TC 38
Textiles
ISO/TR
11827:2012
Textiles — Composition testing — Identification of fibres
ISO
18103:2015
Superfine woven wool fabric labelling — Requirements for Super S code definition
ISO 1136:2015
B
G
B
*
Wool — Determination of mean diameter of fibres — Air permeability method
C
TC 39
Machine tools
ISO 1985:2015
Machine tools — Test conditions for surface grinding machines with vertical grinding wheel
spindle and reciprocating table — Testing of the accuracy
ISO/TR
16907:2015
*
Machine tools — Numerical compensation of geometric errors
E
TC 42
ISO
15781:2015
Photography
*
Photography — Digital still cameras — Measuring shooting time lag, shutter release time
lag, shooting rate, and start-up time
TC 44
Welding and allied processes
ISO
23277:2015
Non-destructive testing of welds — Penetrant testing — Acceptance levels
TC 45
Rubber and rubber products
ISO 6505:2015
D
A
*
TC 58
ISO 211721:2015
D
Rubber, vulcanized or thermoplastic — Determination of tendency to adhere to and corrode
metals
B
Gas cylinders
*
TC 59
Gas cylinders — Welded steel pressure drums up to 3 000 litres capacity for the transport of
gases — Design and construction — Part 1: Capacities up to 1 000 litres
F
Buildings and civil engineering works
ISO 167571:2015
*
ISO/TS 219292:2015
*
Data structures for electronic product catalogues for building services — Part 1: Concepts,
architecture and model
E
Sustainability in building construction — Sustainability indicators — Part 2: Framework for
the development of indicators for civil engineering works
E
TC 61
Plastics
ISO 8991:2003/Amd
1:2015
Plastics — Determination of creep behaviour — Part 1: Tensile creep — Amendment 1
ISO 8992:2003/Amd
1:2015
Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading — Amendment 1
XZ
XZ
ISO
16012:2015
*
ISO
23560:2015
*
B
Woven polypropylene sacks for bulk packaging of foodstuffs
B
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical
and natural gas industries
ISO/TS
16901:2015
*
ISO 155891:2015
*
TC 68
ISO 95641:2011/Amd
1:2015
Plastics — Determination of linear dimensions of test specimens
Guidance on performing risk assessment in the design of onshore LNG installations including the ship/shore interface
G
Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline systems — Part 1: On-land pipelines
G
Financial services
*
Financial services — Personal Identification Number (PIN) management and security —
Part 1: Basic principles and requirements for PINs in card-based systems — Amendment 1
TC 72
Textile machinery and accessories
ISO
23771:2015
Textile machinery — Guide to the design of textile machinery for reduction of the noise
emissions
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO/ASTM
51608:2015
*
ISO/ASTM
51649:2015
*
ISO/ASTM
51707:2015
*
XZ
E
Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing at energies between 50 keV and 7.5 MeV
C
Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV
E
Guide for estimation of measurement uncertainty in dosimetry for radiation processing
B
ISO
12799:2015
Nuclear energy — Determination of nitrogen content in UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets — Inert gas extraction and conductivity detection method
TC 92
Fire safety
ISO 56601:2015
Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat
release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
G
Room corner and open calorimeter — Guidance on sampling and measurement of effluent
gas production using FTIR technique
C
ISO
16405:2015
*
TC 98
ISO 2394:2015
A
Bases for design of structures
*
General principles on reliability for structures
H
TC 106
Dentistry
ISO 74942:2015
Dentistry — Dental units — Part 2: Air, water, suction and wastewater systems
D
TC 108
ISO 108166:1995/Amd
1:2015
Mechanical vibration, shock and condition monitoring
*
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating
parts — Part 6: Reciprocating machines with power ratings above 100 kW — Amendment 1
TC 121
Anaesthetic and respiratory equipment
ISO 53561:2015
Anaesthetic and respiratory equipment — Conical connectors — Part 1: Cones and sockets
ISO 80601-213:2011/Amd
1:2015
C
*
TC 122
ISO
17480:2015
XZ
Medical electrical equipment — Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation — Amendment 1
XZ
Packaging
*
Packaging — Accessible design — Ease of opening
F
TC 131
Fluid power systems
ISO 69531:2015
Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 1:
Main characteristics to be included in literature from suppliers and product-marking requirements
B
ISO 69532:2015
Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2:
Test methods to determine the main characteristics to be included in literature from suppliers
E
ISO
18413:2015
Hydraulic fluid power — Cleanliness of components — Inspection document and principles
related to contaminant extraction and analysis, and data reporting
F
Fluid power systems — O-rings — Part 5: Specification of elastomeric materials for industrial applications
C
ISO 36015:2015
*
TC 137
Footwear sizing designations and marking systems
ISO/TS
19408:2015
Footwear — Sizing — Vocabulary and terminology
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO 44271:2007/Amd
1:2015
ISO 3458:2015
ISO 3501:2015
D
*
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1:
General — Amendment 1: Melt mass-flow rate (MFR) for PE 80 and PE 100
XZ
Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test
method for leaktightness under internal pressure
A
Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test
method for resistance to pull-out under constant longitudinal force
A
ISO 62591:2015
Thermoplastics pipes — Determination of tensile properties — Part 1: General test method
ISO
13951:2015
Plastics piping systems — Test method for the resistance of plastic pipe/pipe or pipe/fitting
assemblies to tensile loading
A
ISO
17778:2015
Plastics piping systems — Fittings, valves and ancillaries — Determination of gaseous flow
rate/pressure drop relationships
A
B
ISO 7509:2015
*
ISO
18851:2015
*
ISO 44374:2015
*
TC 145
ISO
7001:2007/Am
d 2:2015
*
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings
— Test method to prove the structural design of fittings
B
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 4:
Valves
C
Graphical symbols — Public information symbols — Amendment 2
XZ
Air quality
*
Air quality — Meteorology — Siting classifications for surface observing stations on land
C
TC 147
ISO
17690:2015
B
Graphical symbols
TC 146
ISO
19289:2015
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of time to failure under sustained internal pressure
Water quality
*
TC 172
Water quality — Determination of available free cyanide (pH 6) using flow injection analysis
(FIA), gas-diffusion and amperometric detection
B
Optics and photonics
ISO 902212:2015
*
ISO 902214:2015
*
ISO 902217:2015
*
ISO 141324:2015
*
Optics and photonics — Environmental test methods — Part 12: Contamination
B
Optics and photonics — Environmental test methods — Part 14: Dew, hoarfrost, ice
A
TC 173
Optics and photonics — Environmental test methods — Part 17: Combined contamination,
solar radiation
A
Optics and photonics — Vocabulary for telescopic systems — Part 4: Terms for astronomical telescopes
A
Assistive products for persons with disability
IEC 60601-252:2009/Amd
1:2015
*
ISO/TS 1684012:2015
*
Medical electrical equipment — Part 2-52: Particular requirements for the basic safety and
essential performance of medical beds — Amendment 1
XZ
Wheelchair seating — Part 12: Apparatus and method for cushion envelopment testing
C
TC 174
Jewellery
ISO
15093:2015
Jewellery — Determination of precious metals in 999 0/00 gold, platinum and palladium
jewellery alloys — Difference method using ICP-OES
TC 178
Lifts, escalators and moving walks
ISO 257452:2015
Energy performance of lifts, escalators and moving walks — Part 2: Energy calculation and
classification for lifts (elevators)
ISO 25745-
Energy performance of lifts, escalators and moving walks — Part 3: Energy calculation and
B
C
3:2015
classification of escalators and moving walks
TC 184
Automation systems and integration
ISO 157461:2015
*
IEC 622642:2015
*
TC 194
ISO/TR 1099333:2015
Automation systems and integration — Integration of advanced process control and optimization capabilities for manufacturing systems — Part 1: Framework and functional model
D
Enterprise-control system integration — Part 2: Objects and attributes for enterprise-control
system integration
H
Biological and clinical evaluation of medical devices
*
TC 201
ISO
14707:2015
C
Biological evaluation of medical devices — Part 33: Guidance on tests to evaluate genotoxicity — Supplement to ISO 10993-3
F
Surface chemical analysis
*
TC 204
Surface chemical analysis — Glow discharge optical emission spectrometry (GD-OES) —
Introduction to use
B
Intelligent transport systems
ISO/TS 212193:2015
*
ISO/TS 212194:2015
*
ISO/TS 212195:2015
*
ISO/TS 212196:2015
*
ISO/TS 2121918:2015
*
TC 215
Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 3: UML to binary conversion rules
C
Intelligent transport systems — Traffic and travel information (TTI) via transport protocol
experts group, generation 2 (TPEG2) — Part 4: UML to XML conversion rules
F
Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 5: Service framework (TPEG2-SFW)
F
Intelligent transport systems - Traffic and travel information via transport protocol experts
group, generation 2(TPEG2) — Part 6: Message management container (TPEG2-MMC)
C
Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 18: Traffic flow and prediction application
(TPEG2-TFP)
F
Health informatics
ISO/IEEE
1107300103:2015
*
ISO/IEEE
1107310441:2015
*
ISO/IEEE
1107310442:2015
*
Health informatics — Personal health device communication — Part 00103: Overview
G
Health informatics — Personal health device communication — Part 10441: Device specialization — Cardiovascular fitness and activity monitor
H
Health informatics — Personal health device communication — Part 10442: Device specialization — Strength fitness equipment
F
ISO/IEEE
1107320601:2010/A
md 1:2015
Health informatics — Personal health device communication — Part 20601: Application
profile — Optimized exchange protocol — Amendment 1
H
ISO/IEEE
1107330200:2004/A
md 1:2015
Health informatics — Point-of-care medical device communication — Part 30200: Transport
profile — Cable connected — Amendment 1
F
ISO/TR 800012-7:2015
*
TC 221
ISO 103181:2015
Application of risk management for IT-networks incorporating medical devices — Application guidance — Part 2-7: Guidance for Healthcare Delivery Organizations (HDOs) on how
to self-assess their conformance with IEC 80001-1
Geosynthetics
*
Geosynthetics — Part 1: Terms and definitions
A
ISO 103182:2015
Geosynthetics — Part 2: Symbols and pictograms
TC 228
Tourism and related services
ISO
17680:2015
H
B
*
Tourism and related services — Thalassotherapy — Service requirements
D
TC 238
Solid biofuels
ISO
16993:2015
Solid biofuels — Conversion of analytical results from one basis to another
ISO
16994:2015
Solid biofuels — Determination of total content of sulfur and chlorine
TC 261
Additive manufacturing
ISO 172962:2015
Additive manufacturing — General principles — Part 2: Overview of process categories and
feedstock
TMBG
Technical Management Board - groups
ISO
19600:2014
Compliance management systems — Guidelines
IULTCS
International Union of Leather Technologists and Chemists Societies
ISO 172341:2015
Leather — Chemical tests for the determination of certain azo colorants in dyed leathers —
Part 1: Determination of certain aromatic amines derived from azo colorants
JTC 1
Information technology
ISO/IEC
14651:2011/A
md 2:2015
Information technology — International string ordering and comparison — Method for comparing character strings and description of the common template tailorable ordering —
Amendment 2
B
B
B
E
ISO/IEC
19793:2015
*
ISO/IEC
11695-2:2015
*
ISO/IEC
16963:2015
*
ISO/IEC
147633:2014/Cor
1:2015
*
C
XZ
Information technology — Open Distributed Processing — Use of UML for ODP system
specifications
H
Identification cards — Optical memory cards — Holographic recording method — Part 2:
Dimensions and location of accessible optical area
A
Information technology — Digitally recorded media for information interchange and storage
— Test method for the estimation of lifetime of optical disks for long-term data storage
G
Information technology — Implementation and operation of customer premises cabling —
Part 3: Testing of optical fibre cabling — Technical Corrigendum 1
free
ISO/IEC
27043:2015
*
ISO/IEC
17991:2015
*
ISO/IEC
144963:2009/Amd
4:2013/Cor
1:2015
*
ISO/IEC
144963:2009/Cor
5:2015
*
ISO/IEC
144965:2001/Amd
33:2015
*
ISO/IEC
144965:2001/Amd
27:2011/Cor
1:2015
*
ISO/IEC
1449612:2012/Amd
3:2015
*
ISO/IEC
1449612:2012/Cor
3:2015
*
ISO/IEC
1449615:2014/Cor
1:2015
*
ISO/IEC
1449616:2011/Cor
1:2015
*
ISO/IEC
1449626:2010/Cor
8:2015
*
ISO/IEC
1449627:2009/Amd
2:2011/Cor
1:2015
*
ISO/IEC
14496-29:2015
*
ISO/IEC
1449630:2014/Cor
1:2015
*
ISO/IEC
*
Information technology — Security techniques — Incident investigation principles and processes
E
Information technology — Office equipment — Method for Measuring Scanning Productivity
of Digital Multifunctional Devices
E
Information technology — Coding of audio-visual objects — Part 3: Audio — Amendment 4:
New levels for AAC profiles — Technical Corrigendum 1
free
Information technology — Coding of audio-visual objects — Part 3: Audio — Technical Corrigendum 5
free
Information technology — Coding of audio-visual objects — Part 5: Reference software —
Amendment 33: Reference software for MVC plus depth extension of AVC
Information technology — Coding of audio-visual objects — Part 5: Reference software —
Amendment 27: Scalable complexity 3D mesh coding reference software — Technical Corrigendum 1
XZ
free
Information technology — Coding of audio-visual objects — Part 12: ISO base media file
format — Amendment 3: Font streams and other improvements to file format
XZ
Information technology — Coding of audio-visual objects — Part 12: ISO base media file
format — Technical Corrigendum 3
free
Information technology — Coding of audio-visual objects — Part 15: Carriage of network
abstraction layer (NAL) unit structured video in ISO base media file format — Technical
Corrigendum 1
free
Information technology — Coding of audio-visual objects — Part 16: Animation Framework
eXtension (AFX) — Technical Corrigendum 1
free
Information technology — Coding of audio-visual objects — Part 26: Audio conformance —
Technical Corrigendum 8
free
Information technology — Coding of audio-visual objects — Part 27: 3D Graphics conformance — Amendment 2: Scalable complexity 3D mesh coding conformance — Technical
Corrigendum 1
free
Information technology — Coding of audio-visual objects — Part 29: Web video coding
H
Information technology — Coding of audio-visual objects — Part 30: Timed text and other
visual overlays in ISO base media file format — Technical Corrigendum 1
Information technology — JPEG 2000 image coding system: Core coding system — Part 1:
free
— Technical Corrigendum 4
154441:2004/Cor
4:2015
ISO/IEC
1544412:2012/Amd
3:2015
*
ISO/IEC
1544412:2012/Cor
3:2015
*
ISO/IEC
210008:2008/Amd
3:2015
*
ISO/IEC
2100021:2013/Cor
1:2015
*
ISO/IEC
23001-7:2015
*
ISO/IEC
230032:2010/Amd
3:2015
*
ISO/IEC
230033:2012/Cor
3:2015
*
ISO/IEC
230081:2014/Cor
1:2015
*
ISO/IEC
23008-11:2015
*
ISO/IEC
230091:2014/Cor
1:2015
*
ISO/IEC
15459-2:2015
*
ISO/IEC
11179-5:2015
*
ISO/IEC
15944-4:2015
*
ISO/IEC
19763-12:2015
*
ISO/IEC
13250-5:2015
*
free
Information technology — JPEG 2000 image coding system — Part 12: ISO base media file
format — Amendment 3: Font streams and other improvements to file format
XZ
Information technology — JPEG 2000 image coding system — Part 12: ISO base media file
format — Technical Corrigendum 3
free
Information technology — Multimedia framework (MPEG-21) — Part 8: Reference software
— Amendment 3: Contract Expression Language (CEL) and Media Contract Ontology
(MCO) Reference Software
Information technology — Multimedia framework (MPEG-21) — Part 21: Media Contract
Ontology — Technical Corrigendum 1
Information technology — MPEG systems technologies — Part 7: Common encryption in
ISO base media file format files
Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding
(SAOC) — Amendment 3: Dialogue enhancement
E
free
C
XZ
Information technology — MPEG audio technologies — Part 3: Unified speech and audio
coding — Technical Corrigendum 3
free
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 1: MPEG media transport (MMT) — Technical Corrigendum 1
free
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 11: MPEG Media Transport Composition Information
E
Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 1: Media
presentation description and segment formats — Technical Corrigendum 1
free
Information technology — Automatic identification and data capture techniques — Unique
identification — Part 2: Registration procedures
A
Information technology — Metadata registries (MDR) — Part 5: Naming principles
D
Information technology — Business Operational View — Part 4: Business transaction scenarios — Accounting and economic ontology
G
Information technology — Metamodel framework for interoperability (MFI)
12: Metamodel for information model registration
G
— Part
Information technology — Topic Maps — Part 5: Reference model
B
ISO/IEC
20006-2:2015
*
ISO/IEC TR
29195:2015
*
ISO/IEC
29197:2015
*
ISO/IEC
30121:2015
*
Information technology for learning, education and training — Information model for competency — Part 2: Proficiency level information model
Traveller processes for biometric recognition in automated border
D
Information technology — Evaluation methodology for environmental influence in biometric
system performance
A
The following International Standards are confimred for a five year period:
Ferrous metal pipes and metallic fittings
ISO 2531:2009
ISO 10802:1992
(reconfirmed)
TC 6
Paper, board and pulps
ISO 5350-1:2006
(reconfirmed)
ISO 5350-2:2006
(reconfirmed)
ISO 5350-4:2006
(reconfirmed)
ISO 9197:2006
(reconfirmed)
ISO 11480:1997
(reconfirmed)
ISO 29681:2009
TC 8
Ships and marine technology
ISO 9089:1989
(reconfirmed)
TC 10
Technical product documentation
ISO 5845-1:1995
(reconfirmed)
ISO 5845-2:1995
(reconfirmed)
TC 20
Aircraft and space vehicles
ISO 12175:1994
(reconfirmed)
ISO 13526:2010
ISO 22646:2005
D
Information technology — Governance of digital forensic risk framework
Standards confirmed
TC 5
E
TC 22
Road vehicles
ISO 3784:1976
(reconfirmed)
ISO 13232-5:2005
(reconfirmed)
TC 23
Tractors and machinery for agriculture and forestry
ISO 4002-2:1977
(reconfirmed)
ISO 5678:1993
(reconfirmed)
ISO 8910:1993
(reconfirmed)
ISO 8947:1993
(reconfirmed)
TC 24
Particle characterization including sieving
ISO 9276-1:1998
(reconfirmed)
ISO 9276-5:2005
(reconfirmed)
ISO 13318-3:2004
(reconfirmed)
ISO 21501-1:2009
TC 27
Solid mineral fuels
ISO 18894:2006
(reconfirmed)
ISO 18283:2006
(reconfirmed)
TC 28
Petroleum products and related products of synthetic or biological origin
ISO 14935:1998
(reconfirmed)
ISO 6743-2:1981
(reconfirmed)
ISO 6743-5:2006
(reconfirmed)
ISO 6743-7:1986
(reconfirmed)
ISO 6743-8:1987
(reconfirmed)
ISO 8068:2006
(reconfirmed)
ISO 8216-3:1987
(reconfirmed)
ISO 8681:1986
(reconfirmed)
ISO 10050:2005
(reconfirmed)
ISO 11158:2009
TC 29
Small tools
ISO 10643:2009
ISO 603-1:1999
(reconfirmed)
ISO 603-2:1999
(reconfirmed)
ISO 603-3:1999
(reconfirmed)
ISO 603-4:1999
(reconfirmed)
ISO 603-5:1999
(reconfirmed)
ISO 603-6:1999
(reconfirmed)
ISO 603-7:1999
(reconfirmed)
ISO 603-8:1999
(reconfirmed)
ISO 603-9:1999
(reconfirmed)
ISO 603-10:1999
(reconfirmed)
ISO 603-12:1999
(reconfirmed)
ISO 603-13:1999
(reconfirmed)
ISO 603-14:1999
(reconfirmed)
ISO 603-15:1999
(reconfirmed)
ISO 603-16:1999
(reconfirmed)
ISO 9136-2:1999
(reconfirmed)
TC 34
Food products
ISO 7513:1990
(reconfirmed)
ISO 14502-1:2005
(reconfirmed)
ISO 14502-2:2005
(reconfirmed)
ISO 9116:2004
(reconfirmed)
TC 38
Textiles
ISO 5080:1994
(reconfirmed)
ISO 5085-1:1989
(reconfirmed)
ISO 9073-13:2006
(reconfirmed)
ISO 9073-14:2006
(reconfirmed)
ISO 10547:2009
ISO 10554:2009
ISO 10556:2009
ISO 10572:2009
ISO 3005:1978
(reconfirmed)
ISO 2062:2009
ISO 6939:1988
(reconfirmed)
TC 39
Machine tools
ISO 369:2009
ISO 3408-3:2006
(reconfirmed)
ISO 23848-1:2009
ISO 23848-2:2009
TC 44
Welding and allied processes
ISO 18592:2009
TC 48
Laboratory equipment
ISO 4142:2002
(reconfirmed)
ISO 10991:2009
TC 54
Essential oils
ISO 279:1998
(reconfirmed)
ISO 280:1998
(reconfirmed)
ISO 592:1998
(reconfirmed)
ISO 3033-1:2005
(reconfirmed)
ISO 3033-2:2005
(reconfirmed)
ISO 3033-3:2005
(reconfirmed)
ISO 3033-4:2005
(reconfirmed)
ISO 3215:1998
(reconfirmed)
ISO 3520:1998
(reconfirmed)
ISO 3526:2005
(reconfirmed)
ISO 4720:2009
ISO 4728:2003
(reconfirmed)
ISO 7359:1985
(reconfirmed)
ISO 7609:1985
(reconfirmed)
ISO 9842:2003
(reconfirmed)
ISO 9844:2006
(reconfirmed)
ISO 10624:1998
(reconfirmed)
ISO 11019:1998
(reconfirmed)
ISO 11024-1:1998
(reconfirmed)
ISO 11024-2:1998
(reconfirmed)
ISO 11043:1998
(reconfirmed)
ISO 14714:1998
(reconfirmed)
ISO 14716:1998
(reconfirmed)
ISO 22769:2009
ISO 23954:2009
TC 58
Gas cylinders
ISO 22434:2006
(reconfirmed)
TC 61
Plastics
ISO 871:2006
(reconfirmed)
TC 69
Applications of statistical methods
ISO 24153:2009
TC 74
Cement and lime
ISO 679:2009
ISO 29582-1:2009
TC 76
Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical
use
ISO 8362-1:2009
ISO 8362-7:2006
(reconfirmed)
ISO 8871-4:2006
(reconfirmed)
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO 361:1975
(reconfirmed)
ISO 17874-4:2006
(reconfirmed)
TC 96
Cranes
ISO 2374:1983
(reconfirmed)
ISO 11994:1997
(reconfirmed)
TC 98
Bases for design of structures
ISO 11697:1995
(reconfirmed)
TC 102
Iron ore and direct reduced iron
ISO 3086:2006
(reconfirmed)
ISO 2597-1:2006
(reconfirmed)
ISO 6830:1986
(reconfirmed)
TC 105
Steel wire ropes
ISO 2262:1984
(reconfirmed)
TC 106
Dentistry
ISO 1942:2009
ISO 7711-3:2004
(reconfirmed)
ISO 9168:2009
ISO 4073:2009
ISO 7488:1991
(reconfirmed)
ISO 7493:2006
(reconfirmed)
TC 107
Metallic and other inorganic coatings
ISO 1460:1992
(reconfirmed)
ISO 1461:2009
TC 112
Vacuum technology
ISO 27894:2009
ISO 27895:2009
TC 114
Horology
ISO 3159:2009
TC 117
Fans
ISO 13351:2009
TC 118
ISO 28927-1:2009
ISO 28927-2:2009
ISO 28927-3:2009
ISO 28927-5:2009
Compressors and pneumatic tools, machines and equipment
ISO 28927-6:2009
ISO 28927-7:2009
ISO 28927-8:2009
ISO 28927-9:2009
TC 121
Anaesthetic and respiratory equipment
ISO 7376:2009
ISO 11712:2009
ISO 21969:2009
TC 126
Tobacco and tobacco products
ISO 2965:2009
TC 130
Graphic technology
ISO 2834-1:2006
(reconfirmed)
ISO 2846-1:2006
(reconfirmed)
ISO 11084-2:2006
(reconfirmed)
ISO 12642-2:2006
(reconfirmed)
ISO 15930-4:2003
(reconfirmed)
ISO 15930-6:2003
(reconfirmed)
TC 131
Fluid power systems
ISO 4395:2009
ISO 11727:1999
(reconfirmed)
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO 4435:2003
(reconfirmed)
ISO 7675:2003
(reconfirmed)
ISO 1167-1:2006
(reconfirmed)
ISO 12162:2009
ISO 13967:2009
ISO 17454:2006
(reconfirmed)
TC 146
Air quality
ISO 24095:2009
TC 147
Water quality
ISO 17852:2006
(reconfirmed)
ISO 22743:2006
(reconfirmed)
ISO 23913:2006
(reconfirmed)
ISO 10704:2009
ISO 9509:2006
(reconfirmed)
TC 150
Implants for surgery
ISO 5832-2:1999
(reconfirmed)
ISO 20160:2006
(reconfirmed)
ISO 14243-1:2009
ISO 14243-2:2009
TC 155
Nickel and nickel alloys
ISO 7530-7:1992
(reconfirmed)
ISO 7530-8:1992
(reconfirmed)
ISO 7530-9:1993
(reconfirmed)
ISO 9388:1992
(reconfirmed)
ISO 11436:1993
(reconfirmed)
TC 156
Corrosion of metals and alloys
ISO 7539-2:1989
(reconfirmed)
ISO 7539-3:1989
(reconfirmed)
ISO 7539-4:1989
(reconfirmed)
ISO 7539-5:1989
(reconfirmed)
ISO 8407:2009
ISO 12732:2006
(reconfirmed)
ISO 21610:2009
TC 162
Doors and windows
ISO 6612:1980
(reconfirmed)
ISO 6613:1980
(reconfirmed)
ISO 8270:1985
(reconfirmed)
ISO 8275:1985
(reconfirmed)
TC 164
Mechanical testing of metals
ISO 3785:2006
(reconfirmed)
TC 173
Assistive products for persons with disability
ISO 16201:2006
(reconfirmed)
TC 183
Copper, lead, zinc and nickel ores and concentrates
ISO 10251:2006
(reconfirmed)
ISO 10469:2006
(reconfirmed)
ISO 12744:2006
(reconfirmed)
ISO 13291:2006
(reconfirmed)
TC 184
Automation systems and integration
ISO 1358431:1999
(reconfirmed)
TC 188
Small craft
ISO 12401:2009
TC 212
Clinical laboratory testing and in vitro diagnostic test systems
ISO 15193:2009
ISO 15194:2009
TC 215
Health informatics
ISO 17432:2004
(reconfirmed)
ISO/HL7
27932:2009
ISO/HL7
27951:2009
TC 219
Floor coverings
ISO 1766:1999
(reconfirmed)
ISO 2094:1999
(reconfirmed)
ISO 2550:1972
(reconfirmed)
ISO 3018:1974
(reconfirmed)
ISO 11857:1999
(reconfirmed)
ISO 11861:1999
(reconfirmed)
ISO 24011:2009
ISO 24335:2006
(reconfirmed)
ISO 24339:2006
(reconfirmed)
ISO 24340:2006
(reconfirmed)
ISO 24345:2006
(reconfirmed)
IULTCS
International Union of Leather Technologists and Chemists Societies
ISO 11644:2009
JTC 1
ISO/IEC
13170:2009
ISO/IEC
29171:2009
ISO/IEC 197577:2009
ISO/IEC 127851:2009
ISO/IEC 197943:2006
ISO/IEC TR
19795-3:2007
ISO/IEC
24708:2008
ISO/IEC 247133:2009
ISO/IEC TR
24714-1:2008
ISO/IEC TR
24741:2007
Information technology
ISO/IEC 291091:2009
Standards withdrawn
Period from 01 March to 31 March 2015
TC 8
Ships and marine technology
ISO/PAS
28007:2012
(replaced by ISO 28007-1:2015)
TC 106
Dentistry
ISO 11144:1995
(replaced by ISO 7494-2:2015)
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO 10933:1997
(replaced by ISO 4437-4:2015)
TC 221
Geosynthetics
ISO 10318:2005
(replaced by ISO 10318-1:2015, ISO 10318-2:2015)
JTC 1
Information technology
ISO/IEC 155042:2003
(replaced by ISO/IEC 33002:2015, ISO/IEC 33003:2015, ISO/IEC 33004:2015, ISO/IEC 33020:2015)
ISO/IEC TR
15504-7:2008
(replaced by ISO/IEC 33001:2015, ISO/IEC 33002:2015, ISO/IEC 33003:2015, ISO/IEC 33004:2015, ISO/IEC TR
33014:2013)
Meeting calendar
(update at 01 March 2015)
Meetings called for the month of February are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
April 2015
10
London (United
Kingdom)
TC 92/SC 1
Fire safety/Fire initiation and growth
13
Paris (France)
TC 29/SC 2
Small tools/Holding tools, adaptative items and interfaces
13-14
Lyon (France)
TC 117
Fans
13-17
Namur (Belgium)
TC 34/SC 5
Food products/Milk and milk products
13-17
Vienna (Austria)
TC 224
Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators
14
Paris (France)
TC 29/SC 9
Small tools/Tools with defined cutting edges, cutting items
14-17
London (United
Kingdom)
TC 292
Security
15-16
London (United
Kingdom)
TC 67/SC 4
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and production equipment
15-17
Kuala Lumpur
(Malaysia)
PC 286
Collaborative business relationship management -- Framework
15-17
St. Petersburg
(Russian Federation)
TC 172/SC 4
Optics and photonics/Telescopic systems
16
Courbevoie,
Paris (France)
TC 29/SC 8
Small tools/Tools for pressing and moulding
16
Tienjin (China)
TC 161
Control and protective devices for gas and/or oil burners and appliances
17
Paris (France)
TC 29
Small tools
17
Coimbra (Portugal)
TC 92/SC 3
Fire safety/Fire threat to people and environment
19-24
Vico Equense
(Italy)
TC 184/SC 4
Automation systems and integration/Industrial data
19-24
Hangzhou (China)
TC 204
Intelligent transport systems
19-25
Atlanta (USA)
TC 6/SC 2
Paper, board and pulps/Test methods and quality specifications for paper and board
20-22
Zurich (Switzerland)
TC 126
Tobacco and tobacco products
20-22
Zurich (Switzerland)
TC 126/SC 1
Tobacco and tobacco products/Physical and dimensional tests
20-22
Zurich (Switzerland)
TC 126/SC 2
Tobacco and tobacco products/Leaf tobacco
20-24
Cherasco (Italy)
TC 22/SC 41
Road vehicles/Specific aspects for gaseous fuels
20-24
St. Augustin
(Germany)
TC 94/SC 15
Personal safety -- Protective clothing and equipment/Respiratory protective devices
20-24
San Francisco
(USA)
TC 215
Health informatics
21
Beijing (China)
TC 274
Light and lighting
21-22
Düsseldorf
(Germany)
TC 44/SC 10
Welding and allied processes/Unification of requirements in the field of metal welding
21-22
Astana (Kazakhstan)
TC 67/SC 2
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Pipeline transportation systems
21-24
San José, Cali-
TC 171
Document management applications
fornia (USA)
21-24
San José, California (USA)
TC 171/SC 1
Document management applications/Quality
22-23
Milan (Italy)
TC 8/SC 12
Ships and marine technology/Ships and marine technology - Large yachts
23
Luxemburg
(Luxembourg)
TC 31/SC 3
Tyres, rims and valves/Passenger car tyres and rims
23
Luxemburg
(Luxembourg)
TC 31/SC 10
Tyres, rims and valves/Cycle, moped, motorcycle tyres and rims
23
Düsseldorf
(Germany)
TC 44/SC 11
Welding and allied processes/Qualification requirements for welding and allied processes personnel
23-24
Buenos Aires
(Argentina)
TC 34/SC 12
Food products/Sensory analysis
24
Cherasco (Italy)
TC 22/SC 25
Road vehicles/Vehicles using gaseous fuels
24
Luxemburg
(Luxembourg)
TC 31
Tyres, rims and valves
24
San José, California (USA)
TC 171/SC 2
Document management applications/Application issues
24-27
Washington, D.C
(USA)
TC 272
Forensic sciences
25
Atlanta (USA)
TC 6
Paper, board and pulps
30
Virtual (Unknown)
President's
committee
President's committee
30
London (United
Kingdom)
TC 30/SC 2
Measurement of fluid flow in closed conduits/Pressure differential devices
30
London (United
Kingdom)
TC 30/SC 5
Measurement of fluid flow in closed conduits/Velocity and mass methods
TC 30
Measurement of fluid flow in closed conduits
**
April-May 2015
27-1
London (United
Kingdom)
May 2015
4-7
Toronto (Canada)
TC 68
Financial services
4-7
Buxton (United
Kingdom)
TC 94/SC 15
Personal safety -- Protective clothing and equipment/Respiratory protective devices
5-6
Rio de Janeiro
(Brazil)
TC 67/SC 6
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Processing equipment and systems
6
Toronto (Canada)
TC 68
Financial services
6
Toronto (Canada)
TC 68/SC 2
Financial services/Financial Services, security
6
Toronto (Canada)
TC 68/SC 7
Financial services/Core banking
10-15
Rio de Janeiro
(Brazil)
JTC 1/SC 7
Information technology/Software and systems engineering
11-12
Kuching (Malaysia)
JTC 1/SC 27
Information technology/IT Security techniques
11-12
Ottawa (Canada)
TC 159/SC 4
Ergonomics/Ergonomics of human-system interaction
11-15
Ohio (USA)
TC 184/SC 5
Automation systems and integration/Interoperability, integration, and architectures for enterprise
systems and automation applications
11-16
Bologna (Italy)
TC 130
Graphic technology
12-13
Rio de Janeiro
(Brazil)
TC 67/SC 6
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Processing equipment and systems
12-15
Beijing (China)
TC 156
Corrosion of metals and alloys
12-15
Shanghai (China)
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
13
Tokyo (Japan)
TC 10/SC 6
Technical product documentation/Mechanical engineering documentation
13
Turin (Italy)
TC 22/SC 35
Road vehicles/Lighting and visibility
13
Paris (France)
TC 87
Cork
14
Tokyo (Japan)
TC 10/SC 1
Technical product documentation/Basic conventions
15
Tokyo (Japan)
TC 10
Technical product documentation
17-22
Copenhagen
(Denmark)
TC 173/SC 1
Assistive products for persons with disability/Wheelchairs
18
London (United
Kingdom)
TC 4/SC 7
Rolling bearings/Spherical plain bearings
18-21
Prague (Czech
Republic)
TC 229
Nanotechnologies
18-22
Glasgow, Scotland (United
Kingdom)
JTC 1/SC 32
Information technology/Data management and interchange
18-22
Sao Paulo (Brazil)
JTC 1/SC 40
Information technology/IT Service Management and IT Governance
18-22
Chengdu (China)
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
18-22
Luzern (Switzerland)
TC 114
Horology
20
Okinawa (Japan)
TC 131/SC 4
Fluid power systems/Connectors and similar products and components
20
Okinawa (Japan)
TC 131/SC 6
Fluid power systems/Contamination control
20
Okinawa (Japan)
TC 131/SC 9
Fluid power systems/Installations and systems
19
London (United
Kingdom)
TC 4/SC 8
Rolling bearings/Load ratings and life
19
Naples (Italy)
TC 29/SC 5
Small tools/Grinding wheels and abrasives
19
Turin (Italy)
TC 89/SC 3
Wood-based panels/Plywood
19
Luzern (Switzerland)
TC 114/SC 3
Horology/Water-resistant watches
20
London (United
Kingdom)
TC 4/SC 11
Rolling bearings/Linear motion rolling bearings
20
Nagano (Japan)
TC 20/SC 13
Aircraft and space vehicles/Space data and information transfer systems
20
Turin (Italy)
TC 89
Wood-based panels
20
Turin (Italy)
TC 89/SC 1
Wood-based panels/Fibre boards
20
Turin (Italy)
TC 89/SC 2
Wood-based panels/Particle boards
*
*
20
Luzern (Switzerland)
TC 114/SC
14
Horology/Table and wall clocks
20
Okinawa (Japan)
TC 131
Fluid power systems
21
London (United
Kingdom)
TC 4/SC 4
Rolling bearings/Tolerances, tolerance definitions and symbols (including GPS)
21
London (United
Kingdom)
TC 4/SC 5
Rolling bearings/Needle, cylindrical and spherical roller bearings
21
London (United
Kingdom)
TC 4/SC 12
Rolling bearings/Ball bearings
21
Luzern (Switzerland)
TC 114/SC
12
Horology/Antimagnetism
21-22
Copenhagen
(Denmark)
TC 173
Assistive products for persons with disability
21-22
Yangzhou (China)
TC 293
Feed machinery
22
London (United
Kingdom)
TC 4
Rolling bearings
22
Los Angeles
(USA)
TC 119
Powder metallurgy
22
Cape Town
(South Africa)
TC 228
Tourism and related services
24-29
Tokyo (Japan)
TC 113
Hydrometry
25
Tokyo (Japan)
TC 113/SC 1
Hydrometry/Velocity area methods
25-29
Madrid (Spain)
TC 23/SC 18
Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment and systems
25-29
Vancouver
(Canada)
TC 282/SC 2
Water re-use/Water re-use in urban areas
26
Tokyo (Japan)
TC 113/SC 6
Hydrometry/Sediment transport
26-27
Ghent (Belgium)
JTC 1/SC 6
Information technology/Telecommunications and information exchange between systems
26-27
Greenville (USA)
TC 31/SC 9
Tyres, rims and valves/Valves for tube and tubeless tyres
26-29
Buenos Aires
(Argentina)
TC 85/SC 5
Nuclear energy, nuclear technologies, and radiological protection/Nuclear fuel cycle
27
Geneva (Switzerland)
TAG 14
Image Technology
27
London (United
Kingdom)
TC 67/SC 5
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe
27
Tokyo (Japan)
TC 113/SC 8
Hydrometry/Ground water
27
Vancouver
(Canada)
TC 282/SC 3
Water re-use/Risk and performance evaluation of water re-use systems
27-28
Vancouver
(Canada)
TC 282/SC 1
Water re-use/Treated wastewater re-use for Irrigation
27-29
Panama (Panama)
TC 8/SC 1
Ships and marine technology/Lifesaving and fire protection
28
Virtual (Unknown)
President's
committee
President's committee
28
Tokyo (Japan)
TC 113/SC 2
Hydrometry/Flow measurement structures
28
Tokyo (Japan)
London (United
Kingdom)
**
TC 113/SC 5
Hydrometry/Instruments, equipment and data management
TC 131/SC 6
Fluid power systems/Contamination control
June 2015
1-4
Beijing (China)
TC 46/SC 11
Information and documentation/Archives/records management
1-4
Beijing (China)
TC 249
Traditional chinese medicine
1-5
Arlington (USA)
TC 20/SC 14
Aircraft and space vehicles/Space systems and operations
1-5
Guayaquil (Ecuador)
TC 34/SC 18
Food products/Cocoa
1-5
Sapporo (Japan)
TC 42
Photography
1-5
Seattle (USA)
TC 43/SC 3
Acoustics/Underwater acoustics
1-5
Beijing (China)
TC 46/SC 4
Information and documentation/Technical interoperability
1-6
Philadelphia
(USA)
TC 147
Water quality
2-4
Shizuoka City
(Japan)
TC 34/SC 8
Food products/Tea
2-9
Matsue (Japan)
JTC 1/SC 28
Information technology/Office equipment
3-4
Nanjing (China)
TC 155
Nickel and nickel alloys
3-5
Glasgow, Scotland (United
Kingdom)
TC 267
Facilities management
4
Beijing (China)
TC 46/SC 8
Information and documentation/Quality - Statistics and performance evaluation
4
Beijing (China)
TC 46/SC 9
Information and documentation/Identification and description
4
Beijing (China)
TC 46/SC 10
Information and documentation/Requirements for document storage and conditions for preservation
4
Tokyo (Japan)
TC 145/SC 1
Graphical symbols/Public information symbols
4-5
Merida (Mexico)
TC 242
Energy Management
5
Paris (France)
TC 22/SC 36
Road vehicles/Safety aspects and impact testing
5
Beijing (China)
TC 46
Information and documentation
5
Tokyo (Japan)
TC 145
Graphical symbols
5
Tokyo (Japan)
TC 145/SC 3
Graphical symbols/Graphical symbols for use on equipment
5-6
San Antonio
(USA)
TC 85/SC 6
Nuclear energy, nuclear technologies, and radiological protection/Reactor technology
8-9
Chicago (USA)
TC 34/SC 15
Food products/Coffee
8-10
Arlington (USA)
TC 20/SC 16
Aircraft and space vehicles/Unmanned aircraft systems
8-12
Houston (USA)
TC 35
Paints and varnishes
8-12
Berlin (Germany)
TC 121
Anaesthetic and respiratory equipment
8-12
Berlin (Germany)
TC 121/SC 1
Anaesthetic and respiratory equipment/Breathing attachments and anaesthetic machines
8-12
Grasmere (Unit-
TC 268
Sustainable development in communities
*
ed Kingdom)
9
Hokaido (Japan)
TC 31/SC 6
Tyres, rims and valves/Off-the-road tyres and rims
9-10
New York (USA)
TC 29/SC 10
Small tools/Assembly tools for screws and nuts, pliers and nippers
9-12
Pretoria (South
Africa)
REMCO
Committee on reference materials
9-12
London (United
Kingdom)
TC 289
Brand evaluation
10
Sapporo (Japan)
TC 31/SC 7
Tyres, rims and valves/Industrial tyres and rims
10-11
La Plaine StDenis (France)
TC 17/SC 9
Steel/Tinplate and blackplate
11
Sapporo (Japan)
TC 31/SC 5
Tyres, rims and valves/Agricultural tyres and rims
11
Houston (USA)
TC 35/SC 9
Paints and varnishes/General test methods for paints and varnishes
11
Houston (USA)
TC 35/SC 14
Paints and varnishes/Protective paint systems for steel structures
11
York (United
Kingdom)
TC 238
Solid biofuels
11
Grasmere (United Kingdom)
TC 268/SC 1
Sustainable development in communities/Smart community infrastructures
11-12
Paris (France)
TC 24/SC 4
Particle characterization including sieving/Particle characterization
11-12
Southampton
(United Kingdom)
TC 211
Geographic information/Geomatics
12
Zedelgem (Belgium)
TC 23/SC 7
Tractors and machinery for agriculture and forestry/Equipment for harvesting and conservation
15
Virtual (Unknown)
President's
committee
President's committee
15-16
Düsseldorf
(Germany)
TC 17/SC 11
Steel/Steel castings
15-16
Kyoto (Japan)
TC 22/SC 32
Road vehicles/Electrical and electronic components and general system aspects
15-18
Vancouver
(Canada)
TC 22/SC 39
Road vehicles/Ergonomics
15-18
Boras (Sweden)
TC 85/SC 2
Nuclear energy, nuclear technologies, and radiological protection/Radiological protection
15-19
London (United
Kingdom)
PC 277
Sustainable procurement
15-19
Vancouver
(Canada)
TC 22/SC 13
Road vehicles/Ergonomics applicable to road vehicles
15-19
Munich (Germany)
TC 94/SC 14
Personal safety -- Protective clothing and equipment/Fire-fighters' personal equipment
16-17
Zurich (Switzerland)
TC 17/SC 17
Steel/Steel wire rod and wire products
17-19
Berlin (Germany)
TC 172/SC 9
Optics and photonics/Electro-optical systems
18-19
Stuttgart (Germany)
TC 184/SC 2
Automation systems and integration/Robots and robotic devices
18-19
Geneva (Switzerland)
TMB
Technical Management Board
19
Beijing (China)
TC 220
Cryogenic vessels
*
*
**
**
21-26
Matsue (Japan)
TC 37
Terminology and other language and content resources
22-23
Dallas (USA)
TC 20/SC 17
Aircraft and space vehicles/Airport infrastructure
22-25
Avignon (France)
TC 54
Essential oils
22-25
Stockholm
(Sweden)
TC 149
Cycles
22-26
Rouen (France)
JTC 1/SC 36
Information technology/Information technology for learning, education and training
22-26
Gjøvik (Norway)
*
JTC 1/SC 37
Information technology/Biometrics
22-26
(Netherlands)
**
TC 34/SC 9
Food products/Microbiology
22-26
Dalian (China)
TC 69
Applications of statistical methods
22-26
Dalian (China)
TC 69/SC 5
Applications of statistical methods/Acceptance sampling
22-26
Dalian (China)
TC 69/SC 6
Applications of statistical methods/Measurement methods and results
22-26
Dalian (China)
TC 69/SC 8
Applications of statistical methods/Application of statistical and related methodology for new technology and product development
22-26
La Plaine StDenis (France)
TC 94/SC 6
Personal safety -- Protective clothing and equipment/Eye and face protection
22-26
Göteborg (Sweden)
*
TC 188
Small craft
24
Porto (Portugal)
**
TC 17/SC 15
Steel/Railway rails, rails fasteners, wheels and wheelsets
24-25
Düsseldorf
(Germany)
TC 17/SC 4
Steel/Heat treatable and alloy steels
24-26
St. Petersburg
(Russian Federation)
*
TC 20/SC 1
Aircraft and space vehicles/Aerospace electrical requirements
25
Göteborg (Sweden)
*
TC 188/SC 2
Small craft/Engines and propulsion systems
26
Gaithersburg
(USA)
TC 12
Quantities and units
27
Warsaw (Poland)
*
JTC 1/SC 29
Information technology/Coding of audio, picture, multimedia and hypermedia information
Montreal (Canada)
**
JTC 1/SC 31
Information technology/Automatic identification and data capture techniques
*
**
June-July 2015
30-3
Milan (Italy)
*
TC 193
Natural gas
30-3
Milan (Italy)
*
TC 193/SC 1
Natural gas/Analysis of natural gas
30-3
Milan (Italy)
*
TC 193/SC 3
Natural gas/Upstream area
**
TC 120
Leather
*
TC 91
Surface active agents
TC 8/SC 4
Ships and marine technology/Outfitting and deck machinery
TC 44/SC 10
Welding and allied processes/Unification of requirements in the field of metal welding
2nd Quarter 2015
Istanbul (Turkey)
July 2015
1-7
Berlin (Germany)
2-3
Shanghai (China)
6-7
Helsinki (Finland)
**
7-8
Helsinki (Finland)
TC 44/SC 7
Welding and allied processes/Representation and terms
8
Helsinki (Finland)
TC 44/SC 5
Welding and allied processes/Testing and inspection of welds
8
Helsinki (Finland)
TC 44/SC 9
Welding and allied processes/Health and safety
8
Bath (United
Kingdom)
TC 184/SC 1
Automation systems and integration/Physical device control
8-9
Berlin (Germany)
TC 51
Pallets for unit load method of materials handling
9-10
Helsinki (Finland)
TC 44
Welding and allied processes
14-17
Shanghai (China)
TC 8/SC 8
Ships and marine technology/Ship design
16
Berlin (Germany)
TC 261
Additive manufacturing
31
Arlington (USA)
TC 86/SC 6
Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps
**
TC 8/SC 13
Ships and marine technology/Marine technology
*
TC 258
Project, programme and portfolio management
TC 105
Steel wire ropes
TC 206
Fine ceramics
*
JTC 1/SC 35
Information technology/User interfaces
Hangzhou (China)
August 2015
24-28
Toronto (Canada)
25-26
London (United
Kingdom)
26-28
Jeju (Korea,
Republic of)
*
August-September 2015
31-4
Hokaido (Japan)
September 2015
4-12
New Delhi (India)
**
TC 207
Environmental management
7
Teddington
(United Kingdom)
*
TC 164/SC 2
Mechanical testing of metals/Ductility testing
7-11
Tokyo (Japan)
TC 133
Clothing sizing systems - size designation, size measurement methods and digital fittings
7-11
Paris (France)
TC 153
Valves
7-11
Teddington
(United Kingdom)
TC 164
Mechanical testing of metals
7-14
Sydney (Australia)
**
TC 96
Cranes
8-10
Teddington
(United Kingdom)
*
TC 164/SC 5
Mechanical testing of metals/Fatigue testing
9
Teddington
(United Kingdom)
*
TC 164/SC 1
Mechanical testing of metals/Uniaxial testing
9
Teddington
(United Kingdom)
*
TC 164/SC 4
Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)
*
10
Teddington
(United Kingdom)
*
TC 164/SC 3
Mechanical testing of metals/Hardness testing
13
Seoul (Korea,
Republic of)
*
President's
committee
President's committee
13
Seattle (USA)
**
TC 201/SC 6
Surface chemical analysis/Secondary ion mass spectrometry
13-17
Lahaina, Hawaii
(USA)
**
TC 127
Earth-moving machinery
14
Seoul (Korea,
Republic of)
*
COUNCIL
Council
14-15
Washington, D.C
(USA)
*
JTC 1/SC 22
Information technology/Programming languages, their environments and system software interfaces
14-17
Washington, D.C
(USA)
TC 157
Non-systemic contraceptives and STI barrier prophylactics
14-18
Milan (Italy)
*
TC 43
Acoustics
14-18
Berlin (Germany)
**
TC 150
Implants for surgery
14-18
(Canada)
**
TC 205
Building environment design
14-25
Berlin (Germany)
*
TC 213
Dimensional and geometrical product specifications and verification
15
Seoul (Korea,
Republic of)
*
DEVCO
Committee on developing country matters
15
Vienna (Austria)
*
TC 33
Refractories
15
Seoul (Korea,
Republic of)
*
TMB
Technical Management Board
15-17
Pittsburgh (USA)
TC 94/SC 15
Personal safety -- Protective clothing and equipment/Respiratory protective devices
16-18
Seoul (Korea,
Republic of)
*
GA
General Assembly
17
Seoul (Korea,
Republic of)
*
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
17-18
Delft (Netherlands)
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
17-18
(Canada)
TC 163
Thermal performance and energy use in the built environment
18-19
Hawaii (USA)
TC 23/SC 14
Tractors and machinery for agriculture and forestry/Operator controls, operator symbols and other
displays, operator manuals
20-26
Williamsburg
(USA)
*
TC 27
Solid mineral fuels
21-24
Delft (Netherlands)
**
TC 146/SC 1
Air quality/Stationary source emissions
21-25
Poznan (Poland)
**
TC 23/SC 6
Tractors and machinery for agriculture and forestry/Equipment for crop protection
21-25
Delft (Netherlands)
**
TC 146/SC 6
Air quality/Indoor air
23-24
(China)
**
TC 290
Online reputation
24-25
Gouda (Netherlands)
*
TC 34/SC 11
Food products/Animal and vegetable fats and oils
28-29
Basel (Switzerland)
**
TC 44/SC 8
Welding and allied processes/Equipment for gas welding, cutting and allied processes
29-30
Tokyo (Japan)
*
TC 44/SC 3
Welding and allied processes/Welding consumables
**
(Europe)
**
TC 22/SC 19
Road vehicles/Wheels
14-18
Milan (Italy)
*
TC 43/SC 1
Acoustics/Noise
14-18
Milan (Italy)
TC 43/SC 2
Acoustics/Building acoustics
Berlin (Germany)
**
TC 146/SC 2
Air quality/Workplace atmospheres
Johor Bahru
(Malaysia)
**
TC 165
Timber structures
September-October 2015
27-3
Bangkok (Thailand)
*
TC 106
Dentistry
28-2
Kuala Lumpur
(Malaysia)
**
PC 278
Anti-bribery management systems
28-2
Paris (France)
TC 86/SC 1
Refrigeration and air-conditioning/Safety and environmental requirements for refrigerating systems
28-2
Edmonton (Canada)
TC 229
Nanotechnologies
TC 39/SC 4
Machine tools/Woodworking machines
TC 86/SC 8
Refrigeration and air-conditioning/Refrigerants and refrigeration lubricants
TC 23/SC 13
Tractors and machinery for agriculture and forestry/Powered lawn and garden equipment
TC 59
Buildings and civil engineering works
October 2015
1
Rome (Italy)
*
2
Paris (France)
5
Bloomington
(USA)
5
Madrid (Spain)
5-9
Dublin (Ireland)
*
JTC 1/SC 38
Information technology/Cloud Computing and Distributed Platforms
5-9
Madrid (Spain)
*
TC 59/SC 3
Buildings and civil engineering works/Functional/user requirements and performance in building
construction
5-9
Madrid (Spain)
*
TC 59/SC 15
Buildings and civil engineering works/Performance description of houses
5-9
Madrid (Spain)
*
TC 59/SC 16
Buildings and civil engineering works/Accessibility and usability of the built environment
5-9
Vienna (Austria)
*
TC 190
Soil quality
5-9
Vienna (Austria)
*
TC 190/SC 2
Soil quality/Sampling
5-9
Vienna (Austria)
*
TC 190/SC 3
Soil quality/Chemical methods and soil characteristics
5-9
Vienna (Austria)
*
TC 190/SC 4
Soil quality/Biological methods
5-9
Vienna (Austria)
*
TC 190/SC 7
Soil quality/Soil and site assessment
6
Lyon (France)
*
IULTCS
International Union of Leather Technologists and Chemists Societies
8
Virtual (Unknown)
*
President's
committee
President's committee
8-9
Sao Paulo (Brazil)
*
TC 58/SC 2
Gas cylinders/Cylinder fittings
9
Copenhagen
(Denmark)
*
TC 254
Safety of amusement rides and amusement devices
12-16
Paris (France)
*
TC 34/SC 17
Food products/Management systems for food safety
12-16
Turin (Italy)
**
TC 70
Internal combustion engines
12-16
Beijing (China)
*
TC 181
Safety of toys
12-17
Beijing (China)
*
TC 20
Aircraft and space vehicles
**
12-17
Beijing (China)
*
TC 20/SC 4
Aircraft and space vehicles/Aerospace fastener systems
12-17
Beijing (China)
*
TC 20/SC 8
Aircraft and space vehicles/Aerospace terminology
13
Lyon (France)
*
TC 38/SC 1
Textiles/Tests for coloured textiles and colorants
13
Lyon (France)
*
TC 38/SC 2
Textiles/Cleansing, finishing and water resistance tests
13-14
Osaka (Japan)
*
TC 24/SC 4
Particle characterization including sieving/Particle characterization
14
Lyon (France)
*
TC 38/SC 23
Textiles/Fibres and yarns
14
Lyon (France)
*
TC 38/SC 24
Textiles/Conditioning atmospheres and physical tests for textile fabrics
15
Lyon (France)
*
TC 38
Textiles
15-17
Seattle (USA)
*
TC 201
Surface chemical analysis
16
San Diego (USA) *
TC 22/SC 34
Road vehicles/Propulsion, powertrain and powertrain fluids
18-23
Vichy (France)
TC 45
Rubber and rubber products
18-23
Vichy (France)
TC 45/SC 4
Rubber and rubber products/Products (other than hoses)
18-23
Baltimore (USA)
*
TC 184/SC 4
Automation systems and integration/Industrial data
19-21
Jeju (Korea,
Republic of)
*
TC 281
Fine Bubble Technology
19-22
Vichy (France)
TC 45/SC 1
Rubber and rubber products/Rubber and plastics hoses and hose assemblies
19-23
(Germany)
**
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
19-23
Gaithersburg
(USA)
*
TC 92
Fire safety
19-23
Gaithersburg
(USA)
*
TC 92/SC 1
Fire safety/Fire initiation and growth
19-23
Brussels (Belgium)
TC 154
Processes, data elements and documents in commerce, industry and administration
20
Metz (France)
TC 173/SC 2
Assistive products for persons with disability/Classification and terminology
20-23
Oslo (Norway)
**
TC 58/SC 3
Gas cylinders/Cylinder design
20-23
Beijing (China)
*
TC 269
Railway applications
21-23
Katowize (Poland)
TC 263
Coalbed methane (CBM)
21-24
Santiago (Chile)
*
TC 195
Building construction machinery and equipment
22-23
London (United
Kingdom)
*
TC 79/SC 2
Light metals and their alloys/Organic and anodic oxidation coatings on aluminium
22-23
Berlin (Germany)
*
TC 209
Cleanrooms and associated controlled environments
26-29
Pretoria (South
Africa)
**
TC 264
Fireworks
26-30
St. Petersburg
(Russian Federation)
TC 8
Ships and marine technology
26-30
Porto Alegre
(Brazil)
TC 23/SC 17
Tractors and machinery for agriculture and forestry/Manually portable forest machinery
26-31
(China)
**
JTC 1
Information technology
27-29
Berlin (Germany)
*
TC 256
Pigments, dyestuffs and extenders
28-30
Tsukuba (Japan)
**
TC 202
Microbeam analysis
29
Seoul (Korea,
Republic of)
*
TC 71
Concrete, reinforced concrete and pre-stressed concrete
29-30
Tampa, Florida
(USA)
*
TC 17/SC 12
Steel/Continuous mill flat rolled products
(Unknown)
**
TC 2
Fasteners
Madrid (Spain)
**
TC 10/SC 8
Technical product documentation/Construction documentation
(Netherlands)
**
TC 34/SC 2
Food products/Oleaginous seeds and fruits and oilseed meals
Washington, D.C
(USA)
**
TC 79
Light metals and their alloys
Rio de Janeiro
(Brazil)
**
TC 130
Graphic technology
Sao Paulo (Brazil)
**
TC 135/SC 9
Non-destructive testing/Acoustic emission testing
(Turkey)
**
TC 180
Solar energy
(Germany)
**
TC 244
Industrial furnaces and associated processing equipment
(China)
**
TC 282/SC 3
Water re-use/Risk and performance evaluation of water re-use systems
*
TC 41/SC 3
Pulleys and belts (including veebelts)/Conveyor belts
TC 215
Health informatics
November 2015
2
Atlanta (USA)
2-6
Bern (Switzerland)
2-6
Beijing (China)
*
TC 282
Water re-use
3
Atlanta (USA)
*
TC 41/SC 1
Pulleys and belts (including veebelts)/Friction
3
Berlin (Germany)
*
TC 83
Sports and other recreational facilities and equipment
3-5
Montreal (Canada)
TC 20/SC 9
Aircraft and space vehicles/Air cargo and ground equipment
4
Atlanta (USA)
TC 41/SC 4
Pulleys and belts (including veebelts)/Synchronous belt drives
5
Atlanta (USA)
*
TC 41
Pulleys and belts (including veebelts)
9-12
(Spain)
**
TC 189
Ceramic tile
9-13
London (United
Kingdom)
*
PC 287
Chain of custody of wood and wood-based products
9-13
Kobe (Japan)
*
TC 21
Equipment for fire protection and fire fighting
9-13
Tokyo (Japan)
TC 94/SC 15
Personal safety -- Protective clothing and equipment/Respiratory protective devices
9-13
Sydney (Australia)
*
TC 275
Sludge recovery, recycling, treatment and disposal
9-14
Galveston (USA)
*
TC 260
Human resource management
10-13
(Switzerland)
**
TC 112
Vacuum technology
11
Nottingham
(United Kingdom)
*
TC 60
Gears
11-13
(Malaysia)
**
TC 123
Plain bearings
12-13
Kuala Lumpur
(Malaysia)
**
TC 227
Springs
16
(USA)
**
PC 252
Natural gas fuelling stations for vehicles
16-20
(Ghana)
**
TC 36
Cinematography
16-20
Kyoto (Japan)
TC 160
Glass in building
16-20
(USA)
**
TC 210
Quality management and corresponding general aspects for medical devices
16-21
Washington, D.C
(USA)
*
TC 98/SC 3
Bases for design of structures/Loads, forces and other actions
20-28
Hong Kong
(Hong Kong,
China)
*
TC 176
Quality management and quality assurance
Pretoria (South
Africa)
**
TC 212
Clinical laboratory testing and in vitro diagnostic test systems
November-December 2015
16-21
Virginia (USA)
TC 98
Bases for design of structures
December 2015
3-4
Torrance (USA)
*
TC 197
Hydrogen technologies
10
Berlin (Germany)
*
TC 44/SC 6
Welding and allied processes/Resistance welding and allied mechanical joining
14-18
Berlin (Germany)
TC 198
Sterilization of health care products
**
TC 217
Cosmetics
(Sweden)
**
TC 17/SC 1
Steel/Methods of determination of chemical composition
Dayton, Ohio
(USA)
**
TC 159/SC 3
Ergonomics/Anthropometry and biomechanics
Tel Aviv (Israel)
**
TC 282
Water re-use
(Indonesia)
**
TC 292
Security
**
TC 172/SC 1
Optics and photonics/Fundamental standards
Berlin (Germany)
**
TC 138
Plastics pipes, fittings and valves for the transport of fluids
(Japan)
**
TC 142
Cleaning equipment for air and other gases
(United Arab
Emirates)
4th Quarter 2015
2nd Semester 2015
(France)
Month unknown 2015
January 2016
25-29
London (United
Kingdom)
**
TC 107
Metallic and other inorganic coatings
25-29
London (United
Kingdom)
**
TC 107/SC 3
Metallic and other inorganic coatings/Electrodeposited coatings and related finishes
25-29
London (United
Kingdom)
**
TC 107/SC 8
Metallic and other inorganic coatings/Chemical conversion coatings
(China)
**
TC 120
Leather
*
TMB
Technical Management Board
February 2016
26
Nairobi (Kenya)
(South Africa)
**
TC 58/SC 4
Gas cylinders/Operational requirements for gas cylinders
(USA)
**
TC 213
Dimensional and geometrical product specifications and verification
(United Kingdom)
**
TC 257
Evaluation of energy savings
March 2016
3-4
(Unknown)
**
TC 182/SC 1
Geotechnics/Geotechnical investigation and testing
14-18
Sydney (Australia)
**
TC 108/SC 2
Mechanical vibration, shock and condition monitoring/Measurement and evaluation of mechanical
vibration and shock as applied to machines, vehicles and structures
14-18
Sydney (Australia)
**
TC 108/SC 5
Mechanical vibration, shock and condition monitoring/Condition monitoring and diagnostics of
machine systems
17-18
Geneva (Switzerland)
*
COUNCIL
Council
**
TC 67/SC 7
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Offshore structures
Sydney (Australia)
**
TC 178
Lifts, escalators and moving walks
Seoul (Korea,
Republic of)
**
TC 161
Control and protective devices for gas and/or oil burners and appliances
Brussels (Belgium)
**
TC 115
Pumps
(Brazil)
**
TC 67/SC 4
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and production equipment
(India)
**
TC 85
Nuclear energy, nuclear technologies, and radiological protection
(Korea, Republic
of)
**
TC 122
Packaging
Stockholm
(Sweden)
**
TC 130
Graphic technology
(USA)
**
TC 282/SC 3
Water re-use/Risk and performance evaluation of water re-use systems
*
TMB
Technical Management Board
TC 135
Non-destructive testing
1st Quarter 2016
Singapore (Singapore)
April 2016
11-15
May 2016
25
June 2016
15-16
Geneva (Switzerland)
18-20
Munich (Germany)
(Germany)
**
JTC 1/SC 36
Information technology/Information technology for learning, education and training
(Europe)
**
TC 22/SC 38
Road vehicles/Motorcycles and mopeds
**
TC 34/SC 4
Food products/Cereals and pulses
**
TC 23
Tractors and machinery for agriculture and forestry
2nd Quarter 2016
(Germany)
1st Semester 2016
(France)
New Delhi (India)
**
TC 34/SC 7
Food products/Spices, culinary herbs and condiments
(China)
**
TC 34/SC 16
Food products/Horizontal methods for molecular biomarker analysis
September 2016
19
Beijing (China)
*
COUNCIL
Council
20
Beijing (China)
*
TMB
Technical Management Board
21-23
Beijing (China)
*
GA
General Assembly
Vienna (Austria)
**
JTC 1/SC 22
Information technology/Programming languages, their environments and system software interfaces
Paris (France)
**
TC 17
Steel
Sao Paulo (Brazil)
**
TC 209
Cleanrooms and associated controlled environments
Shanghai (China)
**
TC 213
Dimensional and geometrical product specifications and verification
Beijing (China)
**
TC 256
Pigments, dyestuffs and extenders
**
TC 289
Brand evaluation
3rd Quarter 2016
(USA)
October 2016
17-21
(China)
**
TC 5/SC 2
Ferrous metal pipes and metallic fittings/Cast iron pipes, fittings and their joints
20-21
London (United
Kingdom)
*
TC 58
Gas cylinders
(Brazil)
**
TC 59
Buildings and civil engineering works
(Korea, Republic
of)
**
TC 201
Surface chemical analysis
(Israel)
**
TC 282/SC 3
Water re-use/Risk and performance evaluation of water re-use systems
**
JTC 1
Information technology
Delft (Netherlands)
**
TC 28
Petroleum products and related products of synthetic or biological origin
Delft (Netherlands)
**
TC 28/SC 5
Petroleum products and related products of synthetic or biological origin/Measurement of refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels
Delft (Netherlands)
**
TC 28/SC 7
Petroleum products and related products of synthetic or biological origin/Liquid Biofuels
(Korea, Republic
of)
**
JTC 1/SC 23
Information technology/Digitally Recorded Media for Information Interchange and Storage
(Russian Federation)
**
REMCO
Committee on reference materials
(Denmark)
**
TC 37
Terminology and other language and content resources
(South Africa)
**
TC 44
Welding and allied processes
(Malaysia)
**
TC 45
Rubber and rubber products
November 2016
(Norway)
4th Quarter 2016
Month unknown 2016
Wellington (New
Zealand)
**
TC 46
Information and documentation
Wellington (New
Zealand)
**
TC 46/SC 11
Information and documentation/Archives/records management
(Sweden)
**
TC 102
Iron ore and direct reduced iron
(Japan)
**
TC 138/SC 2
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water
supplies
(Japan)
**
TC 183
Copper, lead, zinc and nickel ores and concentrates
**
JTC 1/SC 36
Information technology/Information technology for learning, education and training
London (United
Kingdom)
**
JTC 1/SC 22
Information technology/Programming languages, their environments and system software interfaces
New Delhi (India)
**
TC 178
Lifts, escalators and moving walks
**
TC 289
Brand evaluation
**
JTC 1/SC 36
Information technology/Information technology for learning, education and training
June 2017
(Australia)
September 2017
3rd Quarter 2017
Vienna (Austria)
June 2018
(Korea, Republic
of)