ISO Update
Supplement to ISOfocus
June 2015
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International
Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been
reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The
DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 May to 31 May 2015
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 22
Road vehicles
ISO/CD 151187
Road vehicles — Vehicle to grid communication interface — Part 7: Network and application protocol requirements for wireless communication
TC 23
Tractors and machinery for agriculture and forestry
ISO/CD 20383
Tractors and machinery for agriculture and forestry — Speed Identification Symbol (SIS)
ISO/CD 251191
Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 1: General principles
for design and development
ISO/CD 251192
Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 2: Concept phase
ISO/CD 251193
Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 3: Series development, hardware and software
ISO/CD 251194
Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 4: Production, operation, modification and supporting processes
TC 25
Cast irons and pig irons
ISO/DTR 9453
Microstructure of cast irons — Part 3: Matrix structure
TC 28
Petroleum products and related products of synthetic or biological origin
ISO/CD 2592
Determination of flash and fire points — Cleveland open cup method
TC 31
Tyres, rims and valves
ISO/CD 29802
All terrain (AT) tyres and rims — Symbol marked pneumatic tyres on 5 degrees tapered rims — Designation, dimension,
marking and load ratings
TC 38
Textiles
ISO/CD 10325
Fibre ropes — High modulus polyethylene — 8-strand braided ropes, 12-strand braided ropes and covered ropes
TC 45
Rubber and rubber products
ISO/CD 3949
Plastics hoses and hose assemblies — Textile-reinforced types for hydraulic applications — Specification
ISO/CD 2930
Rubber, raw natural — Determination of plasticity retention index (PRI)
ISO/CD 19846
Reclaimed rubber — Coding and classification system
ISO/CD 2321
Rubber threads — Methods of test
ISO/CD 20058
Rubber thread — Specification
TC 54
Essential oils
ISO/CD 3054
Essential oil of lavandin Abrial (Lavandula angustifolia Miller x Lavandula latifolia Medikus), French type
TC 58
Gas cylinders
ISO/CD 13769
Gas cylinders — Stamp marking
TC 59
Buildings and civil engineering works
ISO/CD 6707-3
Buildings and civil engineering works - Vocabulary — Part 3: Sustainability terms
TC 71
Concrete, reinforced concrete and pre-stressed concrete
ISO/CD 133154
Environmental management for concrete and concrete structures — Part 4: Environmental design of concrete structures
TC 83
Sports and other recreational facilities and equipment
ISO/CD 235371
Requirements for sleeping bags — Part 1: Thermal and dimensional requirements
ISO/CD 235372
Requirements for sleeping bags — Part 2: Fabric and material properties
TC 84
Devices for administration of medicinal products and catheters
ISO/CD 116084
Needle-based injection systems for medical use - Requirements and test methods — Part 4: Needle-based injection systems containing electronics
ISO/CD 116086
Needle-based injection systems for medical use — Requirements and test methods — Part 6: Bolus Injectors
TC 94
Personal safety -- Protective clothing and equipment
ISO/CD 139821
Protective clothing for use against solid particulates — Part 1: Performance requirements for chemical protective clothing
providing protection to the full body against airborne solid particulates (type 5 clothing)
ISO/CD 174912
Protective clothing — Test methods for clothing providing protection against chemicals — Part 2: Determination of resistance to inward leakage of aerosols and gases (inward leakage test)
TC 131
Fluid power systems
ISO/DTS
18409
Hydraulic fluid power — Hose and hose assemblies — Method of collecting a fluid sample for analyzing the cleanliness of a
hose or hose assembly
TC 150
Implants for surgery
ISO/CD 19227
Cleaning of orthopedic implants - General Requirements
ISO/CD 19213
Implants for surgery — Test methods of material for use as a cortical bone model
TC 164
Mechanical testing of metals
ISO/CD 20064
Test method for brittle crack arrst toughness, Kca
TC 165
Timber structures
ISO/CD 221571
Bamboo — Determination of physical and mechanical properties — Part 1: Requirements
TC 173
Assistive products for persons with disability
ISO/CD 15621
Urine-absorbing aids — General guidelines on evaluation
TC 182
Geotechnics
ISO/CD 146881
Geotechnical investigation and testing — Identification and classification of soil — Part 1: Identification and description
ISO/CD 146882
Geotechnical investigation and testing — Identification and classification of soil — Part 2: Principles for a classification
ISO/CD 146891
Geotechnical investigation and testing — Identification and classification of rock — Part 1: Identification and description
TC 206
Fine ceramics
ISO/CD 17561
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for elastic moduli of monolithic ceramics at
room temperature by sonic resonance
ISO/CD 20808
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of friction and wear characteristics of
monolithic ceramics by ball-on-disc method
TC 209
Cleanrooms and associated controlled environments
ISO/CD 1464413
Cleanrooms and associated controlled environments — Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications
TC 219
Floor coverings
ISO/CD 6347
Textile floor coverings — Consumer information
TC 229
Nanotechnologies
ISO/DTS
19006
DCFH-DA assay for evaluating nanoparticle-induced intracellular reactive oxygen species (ROS) production
ISO/DTS
19590
Nanoparticles — Detection and characterization using single-particle ICP-MS
IEC/CD 625653-1
Nanomanufacturing — Material specifications — Part 3-1: Graphene — Blank detail specification
TC 292
Security
ISO/CD 22319
Societal security — Guidance for involving volunteers in the response to major incidents
JTC 1
Information technology
ISO/IEC/IEEE
CD 12207-2
Systems and software engineering — Software life cycle processes — Part 2:
ISO/IEC CD
18013-5
Personal Identification — ISO Compliant Driving Licence — Part 5: Mobile Driving Licence Application
ISO/IEC PDTS
18508
Information technology — Additional Parallel Features in Fortran
ISO/IEC CD
23009-5
Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 5: Server and network assisted DASH
(SAND)
Information Technology --- Data Centres Data Centres — Key Performance Indicators — Part 5: IT Equipment Utilization for
Servers (ITEU_SV )
ISO/IEC CD
30134-5
DIS circulated
Period from 01 May to 31 May 2015
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 6
ISO/DIS 82543
Paper, board and pulps
*
Paper and board — Measurement of specular gloss — Part 3: 20 degree gloss with a converging beam, TAPPI method
2015-08-26
(Revision of ISO 8254-3:2004)
TC 8
ISO/DIS
13073-3
Ships and marine technology
*
TC 20
ISO/DIS 18202
Ships and marine technology — Risk assessment on anti-fouling systems on ships — Part 3:
Human health risk assessment of biocidally active substances in anti-fouling paints on ships
during the application and removal process
2015-08-08
Aircraft and space vehicles
*
Space data and information transfer systems — Mission operations message abstraction
layer
2015-08-08
(Revision of ISO 18202:2013)
ISO/DIS 20618
ISO/DIS 22642
*
*
Space data and information transfer systems — Spacecraft onboard interface services —
Device enumeration service
2015-08-05
Space data and information transfer systems — TC synchronization and channel coding
2015-08-07
(Revision of ISO 22642:2005, ISO 22642:2005/Cor 1:2007)
TC 22
ISO/DIS 66211
Road vehicles
*
Internal combustion engines — Piston rings — Part 1: Vocabulary
2015-08-08
(Revision of ISO 6621-1:2007)
ISO/DIS
*
Road vehicles — Compressed gaseous Hydrogen (CGH2) and Hydrogen/Natural gas blends
12619-4
ISO/DIS
12619-5
*
TC 23
ISO/DIS 25358
fuel system components — Part 4: Check Valve
2015-08-09
Road vehicles — Compressed gaseous Hydrogen (CGH2) and Hydrogen/Natural gas blends
fuel system components — Part 5: Manual cylinder valve
2015-08-09
Tractors and machinery for agriculture and forestry
*
ISO
11450:1999/D
Amd 1
*
ISO/DIS 37671
*
Crop protection equipment — Droplet-size spectra from atomizers — Measurement and classification
2015-08-21
Equipment for harvesting and conservation — Round balers — Terminology and commercial
specifications — Amendment 1
2015-08-12
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment —
Symbols for operator controls and other displays — Part 1: Common symbols
2015-08-12
(Revision of ISO 3767-1:1998, ISO 3767-1:1998/Amd 1:2008, ISO 3767-1:1998/Amd 2:2012)
ISO/DIS 37672
*
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment —
Symbols for operator controls and other displays — Part 2: Symbols for agricultural tractors
and machinery
2015-08-12
(Revision of ISO 3767-2:2008)
ISO/DIS 37673
*
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment —
Symbols for operator controls and other displays — Part 3: Symbols for powered lawn and
garden equipment
2015-08-12
(Revision of ISO 3767-3:1995)
ISO/DIS 37674
*
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment —
Symbols for operator controls and other displays — Part 4: Symbols for forestry machinery
2015-08-12
(Revision of ISO 3767-4:1993, ISO 3767-4:1993/Amd 1:2000, ISO 3767-4:1993/Amd 2:2008)
ISO/DIS 37675
*
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment —
Symbols for operator controls and other displays — Part 5: Symbols for manual portable forestry machines
2015-08-12
(Revision of ISO 3767-5:1992, ISO 3767-5:1992/Amd 1:2001)
ISO/DIS
24631-1
*
Radiofrequency identification of animals — Part 1: Evaluation of conformance of RFID transponders with ISO 11784 and ISO 11785 (including granting and use of a manufacturer code)
2015-08-12
(Revision of ISO 24631-1:2009)
ISO/DIS
24631-2
*
Radiofrequency identification of animals — Part 2: Evaluation of conformance of RFID transceivers with ISO 11784 and ISO 11785
2015-08-12
(Revision of ISO 24631-2:2009)
ISO/DIS
24631-3
*
Radiofrequency identification of animals — Part 3: Evaluation of performance of RFID transponders conforming with ISO 11784 and ISO 11785
2015-08-12
(Revision of ISO 24631-3:2009)
ISO/DIS
24631-4
*
Radiofrequency identification of animals — Part 4: Evaluation of performance of RFID transceivers conforming with ISO 11784 and ISO 11785
(Revision of ISO 24631-4:2009)
TC 29
ISO
Small tools
*
Blanks for superabrasive cutting-off wheels — Mounting and fixing bores — Building con-
2015-08-12
21538:2004/D
Amd 1
struction and civil engineering — Amendment 1
TC 35
Paints and varnishes
ISO/DIS
19396-1
*
ISO/DIS
19396-2
*
TC 37
ISO/DIS 18587
2015-08-12
Paints and varnishes — Determination of pH value — Part 1: pH electrodes with glass membrane
2015-08-26
Paints and varnishes — Determination of pH value — Part 2: pH electrodes with ISFET technology
2015-08-26
Terminology and other language and content resources
*
Translation services — Post-editing of machine translation output — Requirements
2015-08-20
TC 38
ISO/DIS
14362-1
Textiles
*
Textiles — Methods for determination of certain aromatic amines derived from azo colorants
— Part 1: Detection of the use of certain azo colorants accessible with and without extracting
the fibres
2015-08-08
(Revision of ISO 24362-1:2014)
ISO/DIS
14362-3
*
Textiles — Methods for determination of certain aromatic amines derived from azo colorants
— Part 3: Detection of the use of certain azo colorants, which may release 4aminoazobenzene
2015-08-08
(Revision of ISO 24362-3:2014)
TC 43
Acoustics
ISO 3897:2005/DAmd
1
*
ISO/DIS 7029
*
Acoustics — Reference zero for the calibration of audiometric equipment — Part 7: Reference
threshold of hearing under free-field and diffuse-field listening conditions — Amendment 1:
Reference threshold of hearing at 20 Hz and 18 000 Hz under free-field listening conditions
and at 20 Hz under diffuse-field listening conditions
2015-08-15
Acoustics - Statistical distribution of hearing thresholds related to age and gender
2015-08-29
(Revision of ISO 7029:2000)
TC 44
ISO/DIS 3677
Welding and allied processes
*
Filler metal for soft soldering, brazing and braze welding — Designation
2015-08-15
(Revision of ISO 3677:1992)
ISO/DIS
15012-4.2
*
ISO/DIS
15614-1.2
*
Health and safety in welding and allied processes — Equipment for capture and separation of
fume — Part 4: General requirements
2015-07-08
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
2015-07-22
(Revision of ISO 15614-1:2004, ISO 15614-1:2004/Cor 1:2005, ISO 15614-1:2004/Amd
1:2008)
TC 45
ISO/DIS 11424
Rubber and rubber products
*
Rubber hoses and tubing for air and vacuum systems for internal-combustion engines —
Specification
(Revision of ISO 11424:1996)
2015-08-21
ISO/DIS 11759
*
Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) —
Specification
2015-08-21
(Revision of ISO 11759:1999)
ISO/DIS
13775-2
*
Thermoplastic tubing and hoses for automotive use — Part 2: Petroleum-based-fuel applications
2015-08-27
(Revision of ISO 13775-2:2000)
ISO/DIS 247
*
Rubber — Determination of ash
2015-08-21
(Revision of ISO 247:2006)
ISO/DIS 289-2
*
Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 2: Determination of pre-vulcanization characteristics
2015-08-21
(Revision of ISO 289-2:1994)
ISO/DIS 27821
*
Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 1: Differential-pressure methods
2015-08-21
(Revision of ISO 2782-1:2012)
ISO/DIS 18898
*
Rubber — Calibration and verification of hardness testers
2015-08-21
(Revision of ISO 18898:2012)
ISO/DIS
21561-2
*
Styrene-butadiene rubber (SBR) — Determination of the microstructure of solutionpolymerized SBR — Part 2: FTIR with ATR method
2015-08-21
(Revision of ISO 21561:2005, ISO 21561:2005/Amd 1:2010)
ISO/DIS 19246
*
Rubber compounding ingredients — Silica — Oil absorption of precipitated silica
2015-08-21
ISO/DIS 1420
*
Rubber- or plastics-coated fabrics — Determination of resistance to penetration by water
2015-08-09
(Revision of ISO 1420:2001)
ISO/DIS 17717
*
Meteorological balloon — Specification
2015-08-09
TC 60
ISO/DIS 63365
Gears
*
Calculation of load capacity of spur and helical gears — Part 5: Strength and quality of materials
2015-08-05
(Revision of ISO 6336-5:2003)
TC 61
ISO/DIS 18830
ISO/DIS 19679
Plastics
*
*
Plastics — Test method for determining aerobic biodegradation of plastic materials sunk at
the sea water/sandy sediment interface
2015-08-09
Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface — Method by analysis of evolved carbon dioxide
2015-08-20
ISO/DIS
20568-1
*
Plastics — Fluoropolymer dispersion and moulding and extrusion materials — Part 1: Designation system and basis for specifications
2015-08-22
(Revision of ISO 12086-1:2006)
ISO/DIS
20568-2
*
Plastics — Fluoropolymer dispersion and moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
2015-08-29
(Revision of ISO 12086-2:2006)
TC 79
ISO/DIS 3210
Light metals and their alloys
*
Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation
coatings by measurement of the loss of mass after immersion in acid solution(s)
2015-08-22
(Revision of ISO 3210:2010)
TC 89
ISO/DIS 17064
Wood-based panels
*
Wood-based panels — Fibreboard, particleboard and oriented strand board (OSB) — Vocabulary
2015-08-26
(Revision of ISO 17064:2004)
TC 108
Mechanical vibration, shock and condition monitoring
ISO/DIS
13373-9
*
ISO/DIS
21940-12
*
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 9:
Diagnostic techniques for electric motors
2015-08-06
Mechanical vibration — Rotor balancing — Part 12: Procedures and tolerances for rotors with
flexible behaviour
2015-08-09
(Revision of ISO 11342:1998, ISO 11342:1998/Cor 1:2000)
ISO 1606321:2003/DAmd
1
*
ISO 148351:2005/DAmd
1
*
TC 118
ISO/DIS 18740
Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration
by comparison to a reference transducer — Amendment 1
Mechanical vibration and shock — Cold provocation tests for the assessment of peripheral
vascular function — Part 1: Measurement and evaluation of finger skin temperature —
Amendment 1
2015-08-12
2015-08-05
Compressors and pneumatic tools, machines and equipment
*
Turbocompressors — Performance test code — Simplified acceptance test
2015-08-05
TC 121
ISO/DIS 18190
Anaesthetic and respiratory equipment
*
TC 127
ISO/DIS 64051
Anaesthetic and respiratory equipment — General requirements for airways and related
equipment
2015-08-05
Earth-moving machinery
*
Earth-moving machinery — Symbols for operator controls and other displays — Part 1: Common symbols
2015-08-08
(Revision of ISO 6405-1:2004, ISO 6405-1:2004/Amd 1:2010)
ISO/DIS 64052
*
Earth-moving machinery — Symbols for operator controls and other displays — Part 2: Symbols for specific machines, equipment and accessories
(Revision of ISO 6405-2:1993, ISO 6405-2:1993/Amd 1:1997, ISO 6405-2:1993/Amd 2:2004)
2015-08-08
TC 135
ISO/DIS 5577
Non-destructive testing
*
Non-destructive testing — Ultrasonic testing — Vocabulary
2015-08-08
(Revision of ISO 5577:2000)
TC 142
Cleaning equipment for air and other gases
ISO/DIS
16890-3
*
ISO/DIS
16890-4
*
TC 145
Air filters for general ventilation — Part 3: Determination of the gravimetric efficiency and the
air flow resistance versus the mass of test dust captured
2015-08-15
Air filters for general ventilation — Part 4: Conditioning method to determine the minimum
fractional test efficiency
2015-08-15
Graphical symbols
ISO
7001:2007/DA
md 61
*
ISO
7001:2007/DA
md 68
*
ISO
7001:2007/DA
md 69
*
ISO
7001:2007/DA
md 70
*
ISO
7001:2007/DA
md 71
*
ISO
7001:2007/DA
md 74
*
ISO
7001:2007/DA
md 75
*
ISO
7001:2007/DA
md 76
*
ISO
7001:2007/DA
md 77
*
ISO
7001:2007/DA
md 78
*
ISO
7001:2007/DA
md 79
*
ISO
7001:2007/DA
md 80
*
ISO
7001:2007/DA
md 81
*
Graphical symbols — Public information symbols — Amendment 61: Symbol PI TF 029:
Rental bicycle
2015-08-05
Graphical symbols — Public information symbols — Amendment 68: Symbol PI TF 031:
Quarantine
2015-08-05
Graphical symbols — Public information symbols — Amendment 69: Symbol PI TF 032:
Quarantine, animal
2015-08-05
Graphical symbols — Public information symbols — Amendment 70: Symbol PI TF 033:
Quarantine, people
2015-08-05
Graphical symbols — Public information symbols — Amendment 71: Symbol PI TF 034:
Quarantine, plant
2015-08-05
Graphical symbols — Public information symbols — Amendment 74: Symbol PI PF 072: Loop
for the hearing impaired
2015-08-05
Graphical symbols — Public information symbols — Amendment 75: Symbol PI BP 014: Do
not smile
2015-08-05
Graphical symbols — Public information symbols — Amendment 76: Symbol PI BP 013:
Open passport and place on scanning device
2015-08-05
Graphical symbols — Public information symbols — Amendment 77: Symbol PI BP 015: No
headwear
2015-08-05
Graphical symbols — Public information symbols — Amendment 78: Symbol PI BP 016: Wait
2015-08-05
Graphical symbols — Public information symbols — Amendment 79: Symbol PI BP 017: No
sunglasses
2015-08-05
Graphical symbols — Public information symbols — Amendment 80: Symbol PI BP 018: Single person
2015-08-05
Graphical symbols — Public information symbols — Amendment 81: Symbol PI PF 037: Library
2015-08-05
ISO
7001:2007/DA
md 82
*
ISO
7001:2007/DA
md 83
*
ISO
7001:2007/DA
md 85
*
ISO
7001:2007/DA
md 86
*
ISO
7001:2007/DA
md 87
*
ISO
7001:2007/DA
md 88
*
ISO
7001:2007/DA
md 89
*
ISO
7001:2007/DA
md 90
*
ISO
7001:2007/DA
md 91
*
ISO
7001:2007/DA
md 92
*
ISO
7001:2007/DA
md 93
*
ISO
7001:2007/DA
md 94
*
ISO
7001:2007/DA
md 95
*
TC 146
ISO/DIS 17179
ISO/DIS
22262-3
2015-08-05
Graphical symbols — Public information symbols — Amendment 83: Symbol PI TF 036: Selfcontained camper van
2015-08-05
Graphical symbols — Public information symbols — Amendment 85: Symbol PI BP 011:
Manual passport control
2015-08-05
Graphical symbols — Public information symbols — Amendment 86: Symbol PI BP 012:
Move hair
2015-08-05
Graphical symbols — Public information symbols — Amendment 87: Symbol PI BP 009: Biometric facial recognition facility
2015-08-05
Graphical symbols — Public information symbols — Amendment 88: Symbol PI BP 010: Look
to a point
2015-08-05
Graphical symbols — Public information symbols — Amendment 89: Symbol PI CF 019:
Shoeshine
2015-08-05
Graphical symbols — Public information symbols — Amendment 90: Symbol PI CF 020:
Snack machine
2015-08-05
Graphical symbols — Public information symbols — Amendment 91: Symbol PI PF 073: Priority facilities for obese people
2015-08-05
Graphical symbols — Public information symbols — Amendment 92: Symbol PI TF 038: Animal transportation
2015-08-05
Graphical symbols — Public information symbols — Amendment 93: Symbol PI TF 039: Bus
disembarkation
2015-08-05
Graphical symbols — Public information symbols — Amendment 94: Symbol PI TF 040: Bus
embarkation
2015-08-05
Graphical symbols — Public information symbols — Amendment 95: Symbol PI TF 041: Priority seats for obese people
2015-08-05
Air quality
*
*
TC 150
ISO/DIS 7199
Graphical symbols — Public information symbols — Amendment 82: Symbol PI BP 019: Proceed forward
Stationary source emissions — Determination of the mass concentration of ammonia in flue
gas — Performance characteristics of automated measuring systems
2015-08-30
Air quality — Bulk materials — Part 3: Quantitative determination of asbestos by X-ray diffraction method
2015-08-12
Implants for surgery
*
Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators)
2015-08-08
(Revision of ISO 7199:2009, ISO 7199:2009/Amd 1:2012)
ISO/DIS 15674
*
Cardiovascular implants and artificial organs — Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags
2015-08-09
(Revision of ISO 15674:2009)
ISO/DIS 15675
*
Cardiovascular implants and artificial organs — Cardiopulmonary bypass systems — Arterial
blood line filters
2015-08-09
(Revision of ISO 15675:2009)
ISO/DIS 15676
*
Cardiovascular implants and artificial organs — Requirements for single-use tubing packs for
cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO)
2015-08-09
(Revision of ISO 15676:2005)
ISO/DIS 18241
ISO
21535:2007/D
Amd 1
*
*
TC 155
ISO/DIS 8049
Cardiovascular implants and extracorporeal systems — Cardiopulmonary bypass systems —
Venous bubble traps
2015-08-09
Non-active surgical implants — Joint replacement implants — Specific requirements for hipjoint replacement implants — Amendment 1
2015-08-15
Nickel and nickel alloys
*
Ferronickel shot — Sampling for analysis
2015-08-08
(Revision of ISO 8049:1988)
TC 163
ISO/DIS 6946
Thermal performance and energy use in the built environment
*
Building components and building elements — Thermal resistance and thermal transmittance
— Calculation method
2015-08-08
(Revision of ISO 6946:2007)
ISO/DIS 10211
*
Thermal bridges in building construction — Heat flows and surface temperatures — Detailed
calculations
2015-08-08
(Revision of ISO 10211:2007)
ISO/DIS 13370
*
Thermal performance of buildings — Heat transfer via the ground — Calculation methods
2015-08-08
(Revision of ISO 13370:2007)
ISO/DIS 13786
*
Thermal performance of building components — Dynamic thermal characteristics — Calculation methods
2015-08-08
(Revision of ISO 13786:2007)
ISO/DIS 13789
*
Thermal performance of buildings — Transmission and ventilation heat transfer coefficients —
Calculation method
2015-08-08
(Revision of ISO 13789:2007)
TC 164
ISO/DIS 26843
Mechanical testing of metals
*
TC 172
ISO/DIS
10110-11
Metallic Materials — Measurement of fracture toughness at impact loading rates using
precracked Charpy-type test pieces
2015-08-08
Optics and photonics
*
Optics and photonics — Preparation of drawings for optical elements and systems — Part 11:
Non-toleranced data
2015-08-21
(Revision of ISO 10110-11:1996, ISO 10110-11:1996/Cor 1:2006)
TC 183
ISO/DIS 13543
Copper, lead, zinc and nickel ores and concentrates
*
Copper, lead and zinc sulfide concentrates — Determination of mass of contained metal in a
lot
2015-08-09
(Revision of ISO 13543:1996)
TC 189
ISO/DIS
10545-16
Ceramic tile
*
Ceramic tiles — Part 16: Determination of small colour differences and light reflectance values
2015-08-22
(Revision of ISO 10545-16:2010)
TC 206
ISO/DIS 18550
Fine ceramics
*
TC 224
ISO/DIS
24516-1
Fine Ceramics (Advanced ceramics, advanced technical ceramics) — Testing method for
macroheterogeneity in microstructure
2015-08-09
Service activities relating to drinking water supply systems and wastewater
systems - Quality criteria of the service and performance indicators
*
Guidelines for Management of Assets of water supply and wastewater systems — Part 1:
Drinking water distribution networks
TC 232
Learning services outside formal education
ISO/DIS 19366
Learning services outside formal education — Requirements
2015-08-09
2015-08-21
TC 257
ISO/DIS 17747
Evaluation of energy savings
*
Determination of energy savings in organizations
2015-08-05
TC 261
ISO/ASTM DIS
20195
Additive manufacturing
*
2015-08-08
TC 264
Fireworks
ISO/DIS
26261-1
*
ISO/DIS
26261-2
*
ISO/DIS
26261-3
*
ISO/DIS
26261-4
*
Fireworks — Category 4 — Part 1: Terminology
2015-08-14
Fireworks — Category 4 — Part 2: Requirements
2015-08-14
Fireworks — Category 4 — Part 3: Test methods
2015-08-14
Fireworks — Category 4 — Part 4: Minimum labelling requirements and instructions for use
2015-08-14
JTC 1
ISO/IEC DIS
Standard Practice — Guide for Design for Additive Manufacturing
Information technology
*
Information technology — Security techniques — TLS specification for storage systems
20648
2015-08-12
ISO/IEC/IEEE
DIS 29119-5.2
*
ISO/IEC DIS
17839-3
*
ISO/IEC DIS
23005-1
*
Software and systems engineering — Software testing — Part 5: Keyword-driven testing
2015-07-21
Information technology — Identification cards — Biometric system-on-card — Part 3: Logical
information interchange mechanism
2015-08-12
Information technology — Media context and control — Part 1: Architecture
2015-08-12
(Revision of ISO/IEC 23005-1:2014)
ISO/IEC DIS
23005-2
*
Information technology — Media context and control — Part 2: Control information
2015-08-12
(Revision of ISO/IEC 23005-2:2013)
ISO/IEC DIS
23005-3
*
Information technology — Media context and control — Part 3: Sensory information
2015-08-12
(Revision of ISO/IEC 23005-3:2013, ISO/IEC 23005-3:2013/Cor 1:2013)
ISO/IEC DIS
23005-4
*
Information technology — Media context and control — Part 4: Virtual world object characteristics
2015-08-12
(Revision of ISO/IEC 23005-4:2013)
ISO/IEC DIS
23005-5
*
Information technology — Media context and control — Part 5: Data formats for interaction
devices
2015-08-12
(Revision of ISO/IEC 23005-5:2013)
ISO/IEC DIS
23005-6
*
Information technology — Media context and control — Part 6: Common types and tools
2015-08-12
(Revision of ISO/IEC 23005-6:2013)
ISO/IEC
23008-3/DAmd
1
*
ISO/IEC
23008-3/DAmd
2
*
ISO/IEC DIS
15418
*
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 3: 3D audio — Amendment 1: MPEG-H, 3D Audio Profile and Levels
2015-08-12
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 3: 3D audio — Amendment 2: MPEG-H 3D Audio File Format Support
2015-08-12
Information technology — Automatic identification and data capture techniques — GS1 Application Identifiers and ASC MH10 Data Identifiers and maintenance
2015-08-12
(Revision of ISO/IEC 15418:2009)
ISO/IEC
1979414:2013/DAmd
1
*
Information technology — Biometric data interchange formats — Part 14: DNA data —
Amendment 1: Conformance testing and clarification defects
2015-08-05
FDIS circulated
Period from 01 May to 31 May 2015
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 17
ISO/FDIS
16574
Steel
*
2015-07-29
TC 20
Aircraft and space vehicles
ISO/FDIS
19631
*
ISO/FDIS
16679
*
2015-07-07
Space systems — Relative motion analysis elements after LV/SC separation
Road vehicles
*
TC 23
Electrically propelled road vehicles — Safety specifications — Part 4: Post crash electrical
safety
2015-07-07
Tractors and machinery for agriculture and forestry
ISO/FDIS
16230-1
*
ISO/FDIS
16231-2
*
TC 28
ISO/FDIS
20844
Aerospace series — Tube fittings for fluid systems, 5 080 psi (35 000 kPa) — Qualification
specification
2015-07-23
TC 22
ISO/FDIS
6469-4
Determination of percentage of resolvable pearlite in the high carbon steel wire rod
Agricultural machinery and tractors — Safety of higher voltage electrical and electronic components and systems — Part 1: General requirements
2015-07-29
Self-propelled agricultural machinery — Assessment of stability — Part 2: Determination of
static stability and test procedures
2015-07-29
Petroleum products and related products of synthetic or biological origin
*
Petroleum and related products — Determination of the shear stability of polymer-containing
oils using a diesel injector nozzle
2015-07-22
(Revision of ISO 20844:2004)
TC 31
ISO/FDIS
4000-1
Tyres, rims and valves
*
Passenger car tyres and rims — Part 1: Tyres (metric series)
2015-07-09
(Revision of ISO 4000-1:2013)
TC 38
ISO/FDIS
17608
Textiles
*
TC 41
ISO/FDIS
19347
2015-07-14
Pulleys and belts (including veebelts)
*
Synchronous belt drives — Imperial pitch trapezoidal profile system — Belt and pulleys
2015-07-29
TC 45
ISO/FDIS 8308
Textiles — Bare elastane yarns — Determination of resistance to chlorinated water (swimming-pool water)
Rubber and rubber products
*
Rubber and plastics hoses and tubing — Determination of transmission of liquids through
hose and tubing walls
2015-07-29
(Revision of ISO 8308:2006)
ISO/FDIS 2891
*
Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 1: Determination of Mooney viscosity
2015-07-07
(Revision of ISO 289-1:2014)
ISO/FDIS
19050
*
ISO/FDIS 1126
*
Rubber, raw, vulcanised — Determination of metal content by ICP-OES
2015-07-23
Rubber compounding ingredients — Carbon black — Determination of loss on heating
2015-07-29
(Revision of ISO 1126:2006)
ISO/FDIS
19043
*
ISO/FDIS
20299-1
*
Natural rubber latex concentrate — Determination of total phosphate content by spectrophotometric method
2015-07-07
Film for wrapping rubber bales — Part 1: Butadiene rubber (BR) and styrene-butadiene rubber (SBR)
2015-07-29
(Revision of ISO 20299-1:2006, ISO 20299-1:2006/Cor 1:2008)
ISO/FDIS
6123-1
*
Rubber or plastics covered rollers — Specifications — Part 1: Requirements for hardness
2015-07-21
(Revision of ISO 6123-1:1982)
TC 58
ISO/FDIS
16964
Gas cylinders
*
2015-07-23
TC 59
ISO/FDIS
11618
Buildings and civil engineering works
*
TC 61
ISO/FDIS
6721-10
Gas cylinders — Flexible hoses assemblies — Specification and testing
Building construction — Sealants — Classification and requirements for pedestrian walkway
sealants
Plastics
*
Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
(Revision of ISO 6721-10:1999)
ISO/FDIS
2015-07-06
*
Plastics — Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP
2015-07-14
18263-1
and PE used for flexible and rigid consumer packaging — Part 1: Designation system and
basis for specification
TC 76
Transfusion, infusion and injection, and blood processing equipment for
medical and pharmaceutical use
ISO/FDIS
8362-2
*
2015-07-13
Injection containers and accessories — Part 2: Closures for injection vials
2015-07-29
(Revision of ISO 8362-2:2008)
TC 86
ISO 51491:2014/FDAmd
1
Refrigeration and air-conditioning
*
TC 87
ISO/FDIS 2031
Refrigerating systems and heat pumps — Safety and environmental requirements — Part 1:
Definitions, classification and selection criteria — Amendment 1: Correction of QLAV, QLMV
2015-07-08
Cork
*
Granulated cork — Determination of apparent bulk density
2015-07-23
(Revision of ISO 2031:1991)
TC 89
ISO/FDIS
12460-3
Wood-based panels
*
Wood-based panels — Determination of formaldehyde release — Part 3: Gas analysis method
2015-07-29
(Revision of ISO 12460-3:2008)
ISO/FDIS
12460-5
*
Wood-based panels — Determination of formaldehyde release — Part 5: Extraction method
(called the perforator method)
2015-07-29
(Revision of ISO 12460-5:2011)
TC 94
ISO 123121:2013/FDAmd
1
Personal safety -- Protective clothing and equipment
*
TC 106
ISO/FDIS
3630-3
Eye and face protection — Sunglasses and related eyewear — Part 1: Sunglasses for general
use — Amendment 1
2015-07-29
Dentistry
*
Dentistry — Endodontic instruments — Part 3: Compactors: pluggers and spreaders
2015-07-08
(Revision of ISO 3630-3:1994)
ISO/FDIS
17937
*
ISO/FDIS
10650
*
Dentistry — Osteotome
2015-07-22
Dentistry — Powered polymerization activators
2015-07-22
(Revision of ISO 10650-1:2004, ISO 10650-2:2007)
TC 107
ISO/FDIS 2746
Metallic and other inorganic coatings
*
Vitreous and porcelain enamels — High voltage test
2015-07-29
(Revision of ISO 2746:1998)
TC 131
Fluid power systems
ISO/FDIS
19973-2
*
Pneumatic fluid power — Assessment of component reliability by testing — Part 2: Directional
control valves
2015-07-20
(Revision of ISO 19973-2:2007)
ISO/FDIS
19973-3
*
Pneumatic fluid power — Assessment of component reliability by testing — Part 3: Cylinders
with piston rod
2015-07-20
(Revision of ISO 19973-3:2007)
ISO/FDIS
19973-5.2
*
TC 149
ISO/FDIS
4210-2
Pneumatic fluid power — Assessment of component reliability by testing — Part 5: Non-return
valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control
valves, quick-exhaust valves
2015-07-21
Cycles
*
Cycles — Safety requirements for bicycles — Part 2: Requirements for city and trekking,
young adult, mountain and racing bicycles
2015-07-08
(Revision of ISO 4210-2:2014)
ISO/FDIS
4210-6
*
Cycles — Safety requirements for bicycles — Part 6: Frame and fork test methods
2015-07-08
(Revision of ISO 4210-6:2014)
TC 150
ISO/FDIS
13356
Implants for surgery
*
Implants for surgery — Ceramic materials based on yttria-stabilized tetragonal zirconia (YTZP)
2015-07-22
(Revision of ISO 13356:2008)
ISO/FDIS
12417-1
*
Cardiovascular implants and extracorporeal systems — Vascular device-drug combination
products — Part 1: General requirements
2015-07-08
(Revision of ISO/TS 12417:2011)
TC 184
ISO/FDIS
18435-3
Automation systems and integration
*
TC 221
ISO/FDIS
25619-2
Industrial automation systems and integration — Diagnostics, capability assessment and
maintenance applications integration — Part 3: Applications integration description method
2015-07-07
Geosynthetics
*
Geosynthetics — Determination of compression behaviour — Part 2: Determination of shortterm compression behaviour
2015-07-08
(Revision of ISO 25619-2:2008)
TC 234
Fisheries and aquaculture
ISO/FDIS
16741
*
ISO/FDIS
18537
*
ISO/FDIS
18539
*
TC 238
Traceability of Crustacean products — Specifications on the information to be recorded in
farmed Crustacean distribution chains
2015-07-19
Traceability of crustacean products — Specifications on the information to be recorded in
captured crustacean distribution chains
2015-07-27
Traceability of molluscan products — Specifications on the information to be recorded in captured molluscan distribution chains
2015-07-19
Solid biofuels
ISO/FDIS
18134-1
*
ISO/FDIS
18134-2
*
ISO/FDIS
18134-3
*
TC 261
ISO/ASTM
FDIS 52915
Solid biofuels — Determination of moisture content — Oven dry method — Part 1: Total moisture — Reference method
2015-07-08
Solid biofuels — Determination of moisture content — Oven dry method — Part 2: Total moisture — Simplified method
2015-07-08
Solid biofuels — Determination of moisture content — Oven dry method — Part 3: Moisture in
general analysis sample
2015-07-22
Additive manufacturing
*
Specification for additive manufacturing file format (AMF) Version 1.2
2015-10-20
(Revision of ISO/ASTM 52915:2013)
IULTCS
ISO/FDIS 3379
International Union of Leather Technologists and Chemists Societies
*
Leather — Determination of distension and strength of surface (Ball burst method)
2015-07-08
(Revision of ISO 3379:1976)
ISO/FDIS 3380
*
Leather — Physical and mechanical tests - Determination of shrinkage temperature up to 100
°C
2015-07-08
(Revision of ISO 3380:2002)
ISO/FDIS
5402-2
*
Leather — Determination of flex resistance — Part 2: Vamp flex method
2015-07-08
(Revision of ISO 22288:2006)
ISO/FDIS
17235
*
Leather — Physical and mechanical tests — Determination of softness
2015-07-08
(Revision of ISO 17235:2011)
ISO/FDIS
18219
*
ISO/FDIS
19074
*
Leather — Determination of chlorinated hydrocarbons in leather — Chromatographic method
for short-chain chlorinated paraffins (SCCP)
2015-07-29
Leather — Physical and mechanical tests — Determination of water absorption by capillary
action (wicking)
2015-07-08
JTC 1
Information technology
ISO/IEC FDIS
19987
Information technology — EPC Information services — Specification
ISO/IEC FDIS
19988
Information technology — GS1 Core business vocabulary (CBV)
2015-07-09
2015-07-09
ISO/IEC FDIS
17960
*
ISO/IEC
147632:2012/FDAmd
1
*
Information technology — Programming languages, their environments and system software
interfaces — Code signing for source code
2015-07-07
Information technology — Implementation and operation of customer premises cabling — Part
2: Planning and installation — Amendment 1
2015-07-16
ISO/IEC
144965:2001/FDAmd
32
*
ISO/IEC
144965:2001/FDAmd
35
*
ISO/IEC
1449627:2009/FDAm
d5
ISO/IEC
159385:2003/FDAmd
5
*
ISO/IEC
2300013:2014/FDAm
d1
*
ISO/IEC FDIS
23001-10
*
ISO/IEC
230082:2013/FDAmd
4
*
ISO/IEC FDIS
24769-61
*
ISO/IEC FDIS
24769-62
*
ISO/IEC FDIS
24770-61
*
ISO/IEC FDIS
24770-62
*
ISO/IEC FDIS
19788-8
*
ISO/IEC FDIS
19788-9
*
ISO/IEC FDIS
19785-3
*
Information technology — Coding of audio-visual objects — Part 5: Reference software —
Amendment 32: Reference software for multi-resolution 3D mesh compression
2015-07-07
Information technology — Coding of audio-visual objects — Part 5: Reference software —
Amendment 35: 3D-AVC Reference software
2015-07-07
Information technology — Coding of audio-visual objects — Part 27: 3D Graphics conformance — Amendment 5: Multi-resolution 3D mesh compression
2015-07-23
Information technology — Multimedia content description interface — Part 5: Multimedia description schemes — Amendment 5: Quality metadata, multiple text encodings, extended
classification metadata
2015-07-07
Information technology - Multimedia application format (MPEG-A) — Part 13: Augmented
reality application format — Amendment 1: ARAF reference software and conformance
2015-07-07
Information technology — MPEG systems technologies — Part 10: Carriage of timed metadata metrics of media in ISO base media file format
2015-07-13
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 2: High efficiency video coding — Amendment 4
2015-07-07
Information Technology — Real Time Locating System (RTLS) Device Conformance Test
Methods — Part 61: Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface
2015-07-23
Information Technology — Real Time Locating System (RTLS) Device Conformance Test
Methods — Part 62: High rate pulse repetition frequency Ultra Wide Band (UWB) air interface
2015-07-23
Information technology — Real Time Locating System (RTLS) device performance test methods — Part 61: Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface
2015-07-23
Information technology — Real-time locating system (RTLS) device performance test methods — Test methods for air interface communication at 2,4 GHz — Part 62: High rate pulse
repetition frequency Ultra Wide Band (UWB) air interface
2015-07-23
Information technology — Learning, education and training — Metadata for learning resources
— Part 8: Data elements for MLR records
2015-07-29
Information technology — Learning, education and training — Metadata for learning resources
— Part 9: Data elements for Persons
2015-07-29
Information technology — Common Biometric Exchange Formats Framework — Part 3: Patron format specifications
2015-07-06
(Revision of ISO/IEC 19785-3:2007, ISO/IEC 19785-3:2007/Amd 1:2010)
ISO/IEC FDIS
30108-1
*
Information technology — Biometric Identity Assurance Services — Part 1: BIAS services
2015-07-20
Standards published
New International Standards published between 01 May and 31 May 2015
* Available in English only
** French version of standard previously published in English only
Price group
JPC 2
Joint Project Committee - Energy efficiency and renewable energy sources Common terminology
ISO/IEC
13273-1:2015
Energy efficiency and renewable energy sources — Common international terminology —
Part 1: Energy efficiency
C
ISO/IEC
13273-2:2015
Energy efficiency and renewable energy sources — Common international terminology —
Part 2: Renewable energy sources
B
REMCO
Committee on reference materials
ISO Guide
33:2015
Reference materials — Good practice in using reference materials
TC 6
Paper, board and pulps
ISO 2144:2015
Paper, board and pulps — Determination of residue (ash) on ignition at 900 degrees C
E
A
ISO 56366:2015
*
C
TC 8
ISO
29400:2015
Ships and marine technology
*
Aircraft and space vehicles
*
ISO 185411:2014
Space systems — Space based services requirements for centimetre class positioning
E
TC 22
ISO 151183:2015
Ships and marine technology — Offshore wind energy — Port and marine operations
H
TC 20
ISO
18197:2015
Paper and board — Determination of air permeance (medium range) — Part 6: Oken method
Road vehicles
*
Road vehicles — Vehicle to grid communication interface — Part 3: Physical and data link
layer requirements
G
Road vehicles — Standardized access to automotive repair and maintenance information
(RMI) — Part 1: General information and use case definition
F
ISO 185412:2014
Road vehicles — Standardized access to automotive repair and maintenance information
(RMI) — Part 2: Technical requirements
E
ISO 185413:2014
Road vehicles — Standardized access to automotive repair and maintenance information
(RMI) — Part 3: Functional user interface requirements
C
Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 1:
Basic characteristics and dimensions for metal-sheath-type glow-plugs
C
Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 2:
Basic characteristics and dimensions for ceramic-sheath-type glow-plugs
B
Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 3:
Tests and requirements
A
ISO 174471:2015
*
ISO 174472:2015
*
ISO 174473:2015
*
TC 28
Petroleum products and related products of synthetic or biological origin
ISO
16861:2015
Petroleum products — Fuels (class F) — Specifications of dimethyl ether (DME)
TC 29
Small tools
ISO 9138:2015
Abrasive grains — Sampling and splitting
A
A
ISO 27251:2015
Assembly tools for screws and nuts — Square drive sockets — Part 1: Hand-operated sockets
B
ISO 27252:2015
Assembly tools for screws and nuts — Square drive sockets — Part 2: Machine-operated
sockets ("impact")
B
ISO 27253:2015
Assembly tools for screws and nuts — Square drive sockets — Part 3: Machine-operated
sockets ("non-impact")
A
ISO 7738:2015
Assembly tools for screws and nuts — Combination wrenches — Lengths of wrenches and
maximum thickness of heads
A
TC 33
Refractories
ISO
16835:2014
Refractory products — Determination of thermal expansion
ISO
22016:2015
F
*
Determination of sulfur in refractory products and raw materials by gravimetric, photometric
and titrimetric methods
TC 34
Food products
ISO 66471:2015
Rice — Determination of amylose content — Part 1: Reference method
ISO 66472:2015
Rice — Determination of amylose content — Part 2: Routine methods
ISO 166493:2015
Microbiology of the food chain — Horizontal method for the enumeration of betaglucuronidase-positive Escherichia coli — Part 3: Detection and most probable number tech-
C
B
B
B
nique using 5-bromo-4-chloro-3-indolyl-ß-D-glucuronide
ISO 122281:2014
Determination of individual and total sterols contents — Gas chromatographic method — Part
1: Animal and vegetable fats and oils
ISO/TR
17623:2015
Molecular biomarker analysis — SSR analysis of maize
TC 35
Paints and varnishes
ISO 32333:2015
Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part
3: Determination by calculation from the non-volatile-matter content determined in accordance
with ISO 3251, the density of the coating material and the density of the solvent in the coating
material
TC 38
Textiles
ISO 1136:2015
Wool — Determination of mean diameter of fibres — Air permeability method
D
A
C
C
ISO
18067:2015
*
TC 39
ISO 2307:2015
Textiles — Synthetic filament yarns — Determination of shrinkage in dry-hot air (after treatment)
B
Machine tools
*
Test code for machine tools — Part 7: Geometric accuracy of axes of rotation
G
ISO
14137:2015
Test conditions for wire electrical-discharge machines (wire EDM) — Testing of the accuracy
TC 43
Acoustics
ISO 1683:2015
Acoustics — Preferred reference values for acoustical and vibratory levels
D
A
ISO 3621:2015
Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 1:
M and N categories
G
ISO 9295:2015
Acoustics — Determination of high-frequency sound power levels emitted by machinery and
equipment
C
ISO 175341:2015
Acoustics — Software for the calculation of sound outdoors — Part 1: Quality requirements
and quality assurance
D
TC 44
Welding and allied processes
ISO/TR
18491:2015
Welding and allied processes — Guidelines for measurement of welding energies
TC 45
Rubber and rubber products
ISO 1817:2015
Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
B
D
ISO
19051:2015
*
Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content by Micro
Dumas combustion method
B
Rubber latex, natural, concentrate — Determination of sludge content
ISO 2005:2014
A
ISO 57942:2014
Rubber compounding ingredients — Silica, precipitated, hydrated — Part 2: Evaluation procedures in styrene-butadiene rubber
TC 46
Information and documentation
ISO
10160:2015
*
ISO
17316:2015
*
Information and documentation — International standard link identifier (ISLI)
Essential oils
*
Essential oils — Determination of peroxide value
A
TC 58
Gas cylinders
ISO
13341:2010/A
md 1:2015
Gas cylinders — Fitting of valves to gas cylinders — Amendment 1
TC 59
Buildings and civil engineering works
ISO 120062:2015
XZ
*
Building construction — Organization of information about construction works — Part 2:
Framework for classification
TC 61
Plastics
ISO 166202:2015
Plastics — Biobased content — Part 2: Determination of biobased carbon content
ISO 166203:2015
Plastics — Biobased content — Part 3: Determination of biobased synthetic polymer content
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical
and natural gas industries
ISO 155511:2015
G
B
TC 54
ISO
18321:2015
Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Service Definition
A
D
D
B
*
Petroleum and natural gas industries — Drilling and production equipment — Part 1: Electric
submersible pump systems for artificial lift
ISO
11960:2014
Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells
ISO 199013:2014
Petroleum and natural gas industries — Specific requirements for offshore structures — Part
3: Topsides structure
TC 71
Concrete, reinforced concrete and pre-stressed concrete
H
H
ISO 192012:2015
*
ISO
16711:2015
*
Testing of concrete — Part 12: Determination of the carbonation resistance of concrete —
Accelerated carbonation method
H
B
Seismic assessment and retrofit of concrete structures
C
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO 185892:2015
Measurement of radioactivity in the environment — Soil — Part 2: Guidance for the selection
of the sampling strategy, sampling and pre-treatment of samples
D
ISO 185893:2015
Measurement of radioactivity in the environment — Soil — Part 3: Test method of gammaemitting radionuclides using gamma-ray spectrometry
D
TC 87
Cork
ISO 1215:2015
Virgin cork, raw reproduction cork, ramassage, gleanings, burnt cork, corkwaste, boiled cork
pieces and raw corkwaste — Definitions and packaging
TC 91
ISO
17280:2015
A
Surface active agents
*
Surface active agents — Determination of 1,4-dioxan residues in surfactants obtained from
epoxyethane by gas chromatography
B
TC 94
Personal safety -- Protective clothing and equipment
ISO 169008:2015
Respiratory protective devices — Methods of test and test equipment — Part 8: Measurement
of RPD air flow rates of assisted filtering RPD
ISO/TS 169762:2015
Respiratory protective devices — Human factors — Part 2: Anthropometrics
TC 96
Cranes
ISO 99421:2015
Cranes — Information labels — Part 1: General
ISO
17440:2014
Cranes — General design — Limit states and proof of competence of forged steel hooks
TC 106
Dentistry
ISO/TS
11405:2015
Dentistry — Testing of adhesion to tooth structure
TC 108
Mechanical vibration, shock and condition monitoring
ISO
18649:2004
Mechanical vibration — Evaluation of measurement results from dynamic tests and investigations on bridges
D
ISO 202833:2006
Mechanical vibration — Measurement of vibration on ships — Part 3: Pre-installation vibration
measurement of shipboard equipment
D
ISO 148351:2005
Mechanical vibration and shock — Cold provocation tests for the assessment of peripheral
vascular function — Part 1: Measurement and evaluation of finger skin temperature
B
ISO 148352:2005
Mechanical vibration and shock — Cold provocation tests for the assessment of peripheral
vascular function — Part 2: Measurement and evaluation of finger systolic blood pressure
C
ISO 133792:2015
Condition monitoring and diagnostics of machines — Data interpretation and diagnostics
techniques — Part 2: Data-driven applications
B
ISO
Condition monitoring and diagnostics of machines — Approaches for performance diagnosis
C
D
A
G
B
18129:2015
C
ISO 184362:2014
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 2: Vibration condition monitoring and diagnostics
TC 131
Fluid power systems
ISO 3723:2015
Hydraulic fluid power — Filter elements — Method for end load test
F
A
TC 134
ISO
17319:2015
Fertilizers and soil conditioners
*
Fertilizers and soil conditioners — Determination of water-soluble potassium content — Potassium tetraphenylborate gravimetric method
TC 135
Non-destructive testing
ISO
18490:2015
Non-destructive testing — Evaluation of vision acuity of NDT personnel
TC 145
Graphical symbols
ISO
7001:2007/Am
d 2:2015
Graphical symbols — Public information symbols — Amendment 2
ISO
7010:2011/Am
d 6:2014
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 6
TC 146
Air quality
ISO
19289:2015
Air quality — Meteorology — Siting classifications for surface observing stations on land
TC 149
Cycles
D
B
XZ
XZ
C
ISO 67421:2015
*
ISO 67422:2015
*
ISO 67423:2015
*
ISO 67424:2015
*
ISO 67425:2015
*
Cycles — Lighting and retro-reflective devices — Part 1: Lighting and light signalling devices
C
Cycles — Lighting and retro-reflective devices — Part 2: Retro-reflective devices
C
Cycles — Lighting and retro-reflective devices — Part 3: Installation and use of lighting and
retro-reflective devices
B
Cycles — Lighting and retro-reflective devices — Part 4: Lighting systems powered by the
cycle's movement
C
Cycles — Lighting and retro-reflective devices — Part 5: Lighting systems not powered by the
cycle's movement
A
TC 150
Implants for surgery
ISO
16061:2015
Instrumentation for use in association with non-active surgical implants — General requirements
ISO
13958:2014
Concentrates for haemodialysis and related therapies
D
D
ISO
13959:2014
Water for haemodialysis and related therapies
ISO
23500:2014
Guidance for the preparation and quality management of fluids for haemodialysis and related
therapies
ISO
26722:2014
Water treatment equipment for haemodialysis applications and related therapies
TC 156
Corrosion of metals and alloys
ISO
16701:2015
Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion
test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
TC 158
Analysis of gases
ISO 7504:2015
Gas analysis — Vocabulary
C
H
E
C
C
ISO
19229:2015
Gas analysis — Purity analysis and the treatment of purity data
TC 159
Ergonomics
ISO 9241392:2015
Ergonomics of human-system interaction — Part 392: Ergonomic recommendations for the
reduction of visual fatigue from stereoscopic images
TC 171
Document management applications
ISO 126512:2014
Electronic document management — Vocabulary — Part 2: Workflow management
TC 182
Geotechnics
ISO 186741:2015
Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation —
Part 1: General rules
TC 184
Automation systems and integration
ISO/TS 1592611:2015
B
B
*
Industrial automation systems and integration — Integration of life-cycle data for process
plants including oil and gas production facilities — Part 11: Methodology for simplified industrial usage of reference data
TC 188
Small craft
ISO
10240:2004/A
md 1:2015
Small craft — Owner's manual — Amendment 1
TC 190
Soil quality
ISO
11074:2015
E
E
G
XZ
*
Soil quality — Vocabulary
A
ISO/TS
17182:2014
Soil quality — Determination of some selected phenols and chlorophenols — Gas chromatographic method with mass spectrometric detection
TC 199
Safety of machinery
C
ISO/TR 221001:2015
*
TC 204
Safety of machinery — Relationship with ISO 12100 — Part 1: How ISO 12100 relates to
type-B and type-C standards
C
Intelligent transport systems
ISO/TR 171853:2015
*
ISO/TS
18750:2015
*
Intelligent transport systems — Public transport user information — Part 3: Use cases for
journey planning systems and their interoperation
F
Intelligent transport systems — Cooperative systems — Definition of a global concept for
Local Dynamic Maps
G
TC 205
Building environment design
ISO 118552:2012
Building environment design — Design, dimensioning, installation and control of embedded
radiant heating and cooling systems — Part 2: Determination of the design heating and cooling capacity
ISO 118553:2012
Building environment design — Design, dimensioning, installation and control of embedded
radiant heating and cooling systems — Part 3: Design and dimensioning
ISO 118554:2012
Building environment design — Design, dimensioning, installation and control of embedded
radiant heating and cooling systems — Part 4: Dimensioning and calculation of the dynamic
heating and cooling capacity of Thermo Active Building Systems (TABS)
ISO 118555:2012
Building environment design — Design , dimensioning, installation and control of embedded
radiant heating and cooling systems — Part 5: Installation
B
ISO 164846:2014
Building automation and control systems (BACS) — Part 6: Data communication conformance
testing
H
TC 206
Fine ceramics
ISO
18558:2015
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining elastic modulus and bending strength of ceramic tube and rings
TC 210
Quality management and corresponding general aspects for medical devices
ISO 8036920:2015
Small-bore connectors for liquids and gases in healthcare applications — Part 20: Common
test methods
TC 213
Dimensional and geometrical product specifications and verification
ISO 1661040:2015
Geometrical product specifications (GPS) — Filtration — Part 40: Morphological profile filters:
Basic concepts
C
ISO 1661049:2015
Geometrical product specifications (GPS) — Filtration — Part 49: Morphological profile filters:
Scale space techniques
C
TC 215
Health informatics
ISO/TR
12310:2015
*
ISO/TS 187901:2015
*
TC 219
ISO
C
G
B
E
Health informatics — Principles and guidelines for the measurement of conformance in the
implementation of terminological systems
E
Health informatics — Profiling framework and classification for Traditional Medicine informatics standards development — Part 1: Traditional Chinese Medicine
B
Floor coverings
*
G
Resilient floor coverings — Determination of seam strength
16906:2015
A
TC 221
Geosynthetics
ISO
10319:2015
Geosynthetics — Wide-width tensile test
TC 226
Materials for the production of primary aluminium
C
ISO 153791:2015
*
ISO 153792:2015
*
Carbonaceous materials for the production of aluminium — Cathode block materials — Part 1:
Determination of the expansion due to sodium penetration with application of pressure
A
Carbonaceous materials for the production of aluminium — Cathode block materials — Part 2:
Determination of the expansion due to sodium penetration without application of pressure
A
TC 228
Tourism and related services
ISO
13009:2015
Tourism and related services — Requirements and recommendations for beach operation
ISO
13810:2015
E
*
Tourism services — Industrial tourism — Service provision
C
ISO
18065:2015
Tourism and related services — Tourist services for public use provided by Natural Protected
Areas Authorities — Requirements
TC 229
Nanotechnologies
IEC/TS 626072-1:2015
*
Nanomanufacturing - key control characteristics for CNT film applications - Resistivity — Part
2-1:
TC 238
Solid biofuels
ISO
16948:2015
Solid biofuels — Determination of total content of carbon, hydrogen and nitrogen
ISO
16968:2015
Solid biofuels — Determination of minor elements
TC 266
Biomimetics
B
*
ISO
18459:2015
*
Biomimetics — Terminology, concepts and methodology
D
Biomimetics — Biomimetic structural optimization
D
TC 268
Sustainable development in communities
*
Smart community infrastructures — Principles and requirements for performance metrics
G
TC 292
ISO
22322:2015
B
B
ISO
18458:2015
ISO/TS
37151:2015
C
Security
*
Societal security — Emergency management — Guidelines for public warning
B
CASCO
Committee on conformity assessment
ISO/IEC TS
17021-6:2014
Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 6: Competence requirements for auditing and certification of business continuity management systems
A
ISO/IEC TS
17021-7:2014
Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 7: Competence requirements for auditing and certification of road
traffic safety management systems
A
ISO/IEC TR
17026:2015
Conformity assessment — Example of a certification scheme for tangible products
JTC 1
Information technology
E
ISO/IEC
10646:2014/A
md 1:2015
*
ISO/IEC 88252:2008/Cor
3:2015
*
ISO/IEC 88252:2008/Cor
4:2015
*
ISO/IEC
15149-2:2015
*
ISO/IEC/IEEE
15288:2015
*
ISO/IEC/IEEE
15289:2015
*
ISO/IEC/IEEE
23026:2015
*
ISO/IEC/IEEE
26531:2015
*
ISO/IEC
11695-1:2015
*
ISO/IEC TS
18661-2:2015
*
ISO/IEC TS
30104:2015
*
ISO/IEC
154445:2003/Amd
2:2015
*
ISO/IEC
230032:2010/Amd
1:2015
*
ISO/IEC
23003-
*
Information technology — Universal Coded Character Set (UCS) — Amendment 1: Cherokee
supplement and other characters
D
Information technology — ASN.1 encoding rules: Specification of Packed Encoding Rules
(PER) — Part 2: — Technical Corrigendum 3
free
Information technology — ASN.1 encoding rules: Specification of Packed Encoding Rules
(PER) — Part 2: — Technical Corrigendum 4
free
Information technology — Telecommunications and information exchange between systems
— Magnetic field area network (MFAN) — Part 2: In-band Control Protocol for Wireless Power
Transfer
E
Systems and software engineering — System life cycle processes
H
Systems and software engineering — Content of life-cycle information items (documentation)
H
Systems and software engineering — Engineering and management of websites for systems,
software, and services information
F
Systems and software engineering — Content management for product life-cycle, user and
service management documentation
F
Identification cards — Optical memory cards — Holographic recording method — Part 1:
Physical characteristics
B
Information Technology — Programming languages, their environments, and system software
interfaces — Floating-point extensions for C — Part 2: Decimal floating-point arithmetic
G
Information Technology — Security Techniques — Physical Security Attacks, Mitigation
Techniques and Security Requirements
E
Information technology — JPEG 2000 image coding system: Reference software — Part 5:
— Amendment 2: Additional reference software
XZ
Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding
(SAOC) — Amendment 1: SAOC conformance
XZ
Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding
(SAOC) — Amendment 2: SAOC reference software
XZ
2:2010/Amd
2:2015
ISO/IEC
230033:2012/Amd
2:2015
*
ISO/IEC
230033:2012/Amd
2:2015/Cor
1:2015
*
ISO/IEC
23008-2:2015
*
ISO/IEC
29167-10:2015
*
ISO/IEC
29167-12:2015
*
ISO/IEC
29167-13:2015
*
ISO/IEC
17549-2:2015
*
ISO/IEC
197941:2011/Amd
2:2015
*
ISO/IEC TR
29194:2015
*
Information technology — MPEG audio technologies — Part 3: Unified speech and audio
coding — Amendment 2: Reference software
XZ
Information technology — MPEG audio technologies — Part 3: Unified speech and audio
coding — Amendment 2: Reference software — Technical Corrigendum 1
free
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 2: High efficiency video coding
H
Information technology — Automatic identification and data capture techniques — Part 10:
Crypto suite AES-128 security services for air interface communications
D
Information technology — Automatic identification and data capture techniques — Part 12:
Crypto suite ECC-DH security services for air interface communications
F
Information technology — Automatic identification and data capture techniques — Part 13:
Crypto suite Grain-128A security services for air interface communications
F
Information technology — User interface guidelines on menu navigation — Part 2: Navigation
with 4-direction devices
C
Information technology — Biometric data interchange formats — Part 1: Framework —
Amendment 2: Framework for XML encoding
Information Technology — Biometrics — Guide on designing accessible and inclusive biometric systems
Standards confirmed
The following International Standards are confimred for a five year period:
TC 4
Rolling bearings
ISO 12240-1:1998
(reconfirmed)
ISO 12240-2:1998
(reconfirmed)
ISO 12240-3:1998
(reconfirmed)
ISO 12240-4:1998
(reconfirmed)
ISO 76:2006
(reconfirmed)
XZ
C
TC 8
Ships and marine technology
ISO 5621:1984
(reconfirmed)
TC 17
Steel
ISO 437:1982
(reconfirmed)
TC 22
Road vehicles
ISO 6622-1:2003
(reconfirmed)
ISO 16247:2004
(reconfirmed)
ISO 20826:2006
(reconfirmed)
TC 34
Food products
ISO 21570:2005
(reconfirmed)
ISO 21571:2005
(reconfirmed)
ISO 24276:2006
(reconfirmed)
TC 35
Paints and varnishes
ISO 1513:2010
ISO 1520:2006
(reconfirmed)
ISO 1522:2006
(reconfirmed)
ISO 2884-1:1999
(reconfirmed)
ISO 3231:1993
(reconfirmed)
ISO 6504-1:1983
(reconfirmed)
ISO 6504-3:2006
(reconfirmed)
ISO 6860:2006
(reconfirmed)
ISO 9117-2:2010
ISO 9117-3:2010
ISO 16053:2010
ISO 21227-2:2006
(reconfirmed)
TC 38
Textiles
ISO 105-B03:1994
(reconfirmed)
ISO 105-B04:1994
(reconfirmed)
ISO 105-C07:1999
(reconfirmed)
ISO 105-E06:2006
(reconfirmed)
ISO 105-E08:1994
(reconfirmed)
ISO 105-E10:1994
(reconfirmed)
ISO 105-E11:1994
(reconfirmed)
ISO 105-E13:1994
(reconfirmed)
ISO 105-E14:1994
(reconfirmed)
ISO 105-E16:2006
(reconfirmed)
ISO 105-X04:1994
(reconfirmed)
ISO 105-X05:1994
(reconfirmed)
ISO 105-X06:1994
(reconfirmed)
ISO 105-X07:1994
(reconfirmed)
ISO 105-X08:1994
(reconfirmed)
ISO 105-X11:1994
(reconfirmed)
ISO 105-X13:1994
(reconfirmed)
TC 41
Pulleys and belts (including veebelts)
ISO 21183-1:2005
(reconfirmed)
TC 44
Welding and allied processes
ISO 15011-2:2009
ISO 15011-3:2009
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO/TS
12747:2011
ISO 14723:2009
ISO 10423:2009
ISO 13624-1:2009
ISO 13628-2:2006
(reconfirmed)
ISO 13628-5:2009
ISO 13628-8:2002
ISO 13628-9:2000
(reconfirmed)
ISO 15136-1:2009
TC 68
Financial services
ISO/TR
19038:2005
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO 6527:1982
(reconfirmed)
ISO 7385:1983
(reconfirmed)
ISO 8107:1993
(reconfirmed)
TC 87
Cork
ISO 8724:2009
TC 89
Wood-based panels
ISO 27528:2009
TC 94
Personal safety -- Protective clothing and equipment
ISO 6942:2002
(reconfirmed)
TC 96
Cranes
ISO 12480-3:2005
(reconfirmed)
TC 110
Industrial trucks
ISO/TS 36917:2011
TC 164
Mechanical testing of metals
ISO 16630:2009
TC 171
Document management applications
ISO 3272-1:2003
(reconfirmed)
ISO 4087:2005
(reconfirmed)
ISO 6199:2005
(reconfirmed)
ISO 6342:2003
(reconfirmed)
ISO 10196:2003
(reconfirmed)
TC 172
Optics and photonics
ISO 8980-5:2005
ISO 10342:2010
ISO 10936-2:2010
ISO 10942:2006
(reconfirmed)
ISO 11979-9:2006
(reconfirmed)
ISO 12865:2006
(reconfirmed)
ISO 12867:2010
ISO 15752:2010
TC 184
Automation systems and integration
ISO/TS 8000100:2009
ISO/TS 8000150:2011
ISO/TS 1030326:2011
ISO 10303207:1999
(reconfirmed)
ISO 10303225:1999
(reconfirmed)
ISO/TR 10303307:2000
(reconfirmed)
ISO/TS 10303433:2011
ISO/TS 10303439:2011
ISO 10303512:1999
(reconfirmed)
ISO 10303514:1999
(reconfirmed)
ISO/TS 103031013:2011
ISO/TS 103031021:2011
ISO/TS 103031025:2011
ISO/TS 103031062:2011
ISO/TS 103031133:2011
ISO/TS 103031164:2011
ISO/TS 103031233:2011
ISO/TS 103031241:2011
ISO/TS 103031251:2011
ISO/TS 103031255:2011
ISO/TS 103031258:2011
ISO/TS 103031260:2011
ISO/TS 103031261:2011
ISO/TS 103031267:2011
ISO/TS 103031271:2011
ISO/TS 103031278:2011
ISO/TS 103031281:2011
ISO/TS 103031283:2011
ISO/TS 103031287:2011
ISO/TS 103031292:2011
ISO/TS 103031293:2011
ISO/TS 103031295:2011
ISO/TS 103031297:2011
ISO/TS 103031304:2011
ISO/TS 103031306:2011
ISO/TS 10303-
1307:2011
ISO/TS 103031348:2011
ISO/TS 103031371:2011
ISO/TS 103031400:2011
ISO/TS 103031401:2011
ISO/TS 103031433:2011
ISO/TS 103031434:2011
ISO/TS 103031435:2011
ISO/TS 103031436:2011
ISO/TS 103031437:2011
ISO/TS 103031438:2011
ISO/TS 103031448:2011
ISO/TS 103031450:2011
ISO/TS 103031466:2011
ISO/TS 103031467:2011
ISO/TS 103031475:2011
ISO/TS 103031477:2011
ISO/TS 103031486:2011
ISO/TS 103031489:2011
ISO/TS 103031786:2011
ISO/TS 103031801:2011
TC 198
Sterilization of health care products
ISO 11607-1:2006
(reconfirmed)
ISO 11607-2:2006
(reconfirmed)
ISO 11737-2:2009
JTC 1
ISO/IEC TR
Information technology
9575:1995
ISO/IEC TR
9577:1999
ISO/IEC TR
9578:1990
ISO/IEC TR
10021-11:1999
ISO/IEC TR
10171:2000
ISO/IEC TR
11802-5:1997
ISO/IEC
13560:2009
ISO/IEC TR
13594:1995
ISO/IEC TR
15294:2000
ISO/IEC TR
18016:2003
ISO/IEC
20113:2004
(reconfirmed)
ISO/IEC
20114:2004
(reconfirmed)
ISO/IEC
20115:2004
(reconfirmed)
ISO/IEC
20116:2004
(reconfirmed)
ISO/IEC
20117:2004
(reconfirmed)
ISO/IEC
26907:2009
ISO/IEC
26908:2009
ISO/IEC 180133:2009
Standards withdrawn
Period from 01 May to 31 May 2015
TC 22
Road vehicles
ISO 6550-1:1994
(replaced by ISO 17447-1:2015, ISO 17447-2:2015, ISO 17447-3:2015)
ISO 6550-2:1994
(replaced by ISO 17447-1:2015, ISO 17447-2:2015, ISO 17447-3:2015)
ISO 7578:2008
(replaced by ISO 17447-1:2015, ISO 17447-2:2015, ISO 17447-3:2015)
TC 34
Food products
ISO/TS 166493:2005
(replaced by ISO 16649-3:2015)
TC 35
Paints and varnishes
ISO 23811:2009
(replaced by ISO 3233-3:2015)
TC 213
Dimensional and geometrical product specifications and verification
ISO/TS 1661040:2006
(replaced by ISO 16610-40:2015)
ISO/TS 1661049:2006
(replaced by ISO 16610-49:2015)
TMBG
Technical Management Board - groups
ISO 554:1976
(replaced by )
ISO 558:1980
(replaced by )
ISO 3205:1976
(replaced by )
ISO 4677-1:1985
(replaced by )
ISO 4677-2:1985
(replaced by )
ISO/TS
10674:2011
(replaced by )
Meeting calendar
(update at 01 May 2015)
Meetings called for the month of April are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
June 2015
1-4
Beijing (China)
TC 46/SC 11
Information and documentation/Archives/records management
1-4
Beijing (China)
TC 249
Traditional chinese medicine
1-5
Arlington (USA)
TC 20/SC 14
Aircraft and space vehicles/Space systems and operations
1-5
Guayaquil (Ecuador)
TC 34/SC 18
Food products/Cocoa
1-5
Sapporo (Japan)
TC 42
Photography
1-5
Seattle (USA)
TC 43/SC 3
Acoustics/Underwater acoustics
1-5
Beijing (China)
TC 46/SC 4
Information and documentation/Technical interoperability
1-6
Philadelphia
(USA)
TC 147
Water quality
2-4
Shizuoka City
(Japan)
TC 34/SC 8
Food products/Tea
3-4
Nanjing (China)
TC 155
Nickel and nickel alloys
3-5
Glasgow, Scotland (United
Kingdom)
TC 267
Facilities management
4
Beijing (China)
TC 46/SC 8
Information and documentation/Quality - Statistics and performance evaluation
4
Beijing (China)
TC 46/SC 9
Information and documentation/Identification and description
4
Beijing (China)
TC 46/SC 10
Information and documentation/Requirements for document storage and conditions for preservation
4
Tokyo (Japan)
TC 145/SC 1
Graphical symbols/Public information symbols
4-5
Montreal (Canada)
JTC 1/SC 31
Information technology/Automatic identification and data capture techniques
4-5
Merida (Mexico)
TC 242
Energy Management
5
Paris (France)
TC 22/SC 36
Road vehicles/Safety aspects and impact testing
5
Beijing (China)
TC 46
Information and documentation
5
Tokyo (Japan)
TC 145
Graphical symbols
5
Tokyo (Japan)
TC 145/SC 3
Graphical symbols/Graphical symbols for use on equipment
5-6
San Antonio
(USA)
TC 85/SC 6
Nuclear energy, nuclear technologies, and radiological protection/Reactor technology
8-9
Matsue (Japan)
JTC 1/SC 28
Information technology/Office equipment
8-10
Arlington (USA)
TC 20/SC 16
Aircraft and space vehicles/Unmanned aircraft systems
8-12
Houston (USA)
TC 35
Paints and varnishes
8-12
Berlin (Germany)
TC 121
Anaesthetic and respiratory equipment
8-12
Berlin (Germany)
TC 121/SC 1
Anaesthetic and respiratory equipment/Breathing attachments and anaesthetic machines
8-12
Grasmere (United Kingdom)
TC 268
Sustainable development in communities
9
Hokaido (Japan)
TC 31/SC 6
Tyres, rims and valves/Off-the-road tyres and rims
9-10
New York (USA)
TC 29/SC 10
Small tools/Assembly tools for screws and nuts, pliers and nippers
9-12
Pretoria (South
Africa)
REMCO
Committee on reference materials
9-12
London (United
Kingdom)
TC 289
Brand evaluation
10
Sapporo (Japan)
TC 31/SC 7
Tyres, rims and valves/Industrial tyres and rims
10-11
La Plaine St-
TC 17/SC 9
Steel/Tinplate and blackplate
*
Denis (France)
11
Sapporo (Japan)
TC 31/SC 5
Tyres, rims and valves/Agricultural tyres and rims
11
Houston (USA)
TC 35/SC 9
Paints and varnishes/General test methods for paints and varnishes
11
Houston (USA)
TC 35/SC 14
Paints and varnishes/Protective paint systems for steel structures
11
York (United
Kingdom)
TC 238
Solid biofuels
11
Grasmere (United Kingdom)
TC 268/SC 1
Sustainable development in communities/Smart community infrastructures
11-12
Paris (France)
TC 24/SC 4
Particle characterization including sieving/Particle characterization
11-12
Southampton
(United Kingdom)
TC 211
Geographic information/Geomatics
12
Zedelgem (Belgium)
TC 23/SC 7
Tractors and machinery for agriculture and forestry/Equipment for harvesting and conservation
15
Geneva (Switzerland)
President's
committee
President's committee
15-16
Düsseldorf
(Germany)
TC 17/SC 11
Steel/Steel castings
15-16
Kyoto (Japan)
TC 22/SC 32
Road vehicles/Electrical and electronic components and general system aspects
15-18
Vancouver
(Canada)
TC 22/SC 39
Road vehicles/Ergonomics
15-18
Boras (Sweden)
TC 85/SC 2
Nuclear energy, nuclear technologies, and radiological protection/Radiological protection
15-19
London (United
Kingdom)
PC 277
Sustainable procurement
15-19
Vancouver
(Canada)
TC 22/SC 13
Road vehicles/Ergonomics applicable to road vehicles
15-19
Munich (Germany)
TC 94/SC 14
Personal safety -- Protective clothing and equipment/Fire-fighters' personal equipment
16
Geneva (Switzerland)
CSC/SPC
Council/Strategy and Policy Committee (CSC/SPC)
16-17
Zurich (Switzerland)
TC 17/SC 17
Steel/Steel wire rod and wire products
17-18
Geneva (Switzerland)
TMB
Technical Management Board
17-19
Berlin (Germany)
TC 172/SC 9
Optics and photonics/Electro-optical systems
18
Geneva (Switzerland)
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
18-19
Stuttgart (Germany)
TC 184/SC 2
Automation systems and integration/Robots and robotic devices
19
Beijing (China)
TC 220
Cryogenic vessels
21-26
Matsue (Japan)
TC 37
Terminology and other language and content resources
22-23
Dallas (USA)
TC 20/SC 17
Aircraft and space vehicles/Airport infrastructure
22-25
Avignon (France)
TC 54
Essential oils
22-26
Rouen (France)
JTC 1/SC 36
Information technology/Information technology for learning, education and training
**
*
22-26
Gjøvik (Norway)
*
JTC 1/SC 37
Information technology/Biometrics
22-26
(Netherlands)
**
TC 34/SC 9
Food products/Microbiology
22-26
Dalian (China)
TC 69
Applications of statistical methods
22-26
Dalian (China)
TC 69/SC 5
Applications of statistical methods/Acceptance sampling
22-26
Dalian (China)
TC 69/SC 6
Applications of statistical methods/Measurement methods and results
22-26
Dalian (China)
TC 69/SC 8
Applications of statistical methods/Application of statistical and related methodology for new technology and product development
22-26
La Plaine StDenis (France)
TC 94/SC 6
Personal safety -- Protective clothing and equipment/Eye and face protection
24
Porto (Portugal)
TC 17/SC 15
Steel/Railway rails, rails fasteners, wheels and wheelsets
24
Stockholm
(Sweden)
TC 149/SC 1
Cycles/Cycles and major sub-assemblies
24-25
Düsseldorf
(Germany)
TC 17/SC 4
Steel/Heat treatable and alloy steels
24-26
St. Petersburg
(Russian Federation)
TC 20/SC 1
Aircraft and space vehicles/Aerospace electrical requirements
25
Dalian (China)
TC 69/SC 1
Applications of statistical methods/Terminology and symbols
25
Göteborg (Sweden)
TC 188/SC 2
Small craft/Engines and propulsion systems
26
Gaithersburg
(USA)
TC 12
Quantities and units
26
Dalian (China)
TC 69/SC 4
Applications of statistical methods/Applications of statistical methods in process management
26
Dalian (China)
TC 69/SC 7
Applications of statistical methods/Applications of statistical and related techniques for the implementation of Six Sigma
26
Düsseldorf
(Germany)
TC 159/SC 1
Ergonomics/General ergonomics principles
27
Warsaw (Poland)
JTC 1/SC 29
Information technology/Coding of audio, picture, multimedia and hypermedia information
**
June-July 2015
30-3
Milan (Italy)
*
TC 193
Natural gas
30-3
Milan (Italy)
*
TC 193/SC 1
Natural gas/Analysis of natural gas
30-3
Milan (Italy)
*
TC 193/SC 3
Natural gas/Upstream area
July 2015
1-7
Berlin (Germany)
TC 91
Surface active agents
3
Shanghai (China)
TC 8/SC 4
Ships and marine technology/Outfitting and deck machinery
6-7
Helsinki (Finland)
TC 44/SC 10
Welding and allied processes/Unification of requirements in the field of metal welding
6-9
Hamburg (Germany)
TC 8/SC 2
Ships and marine technology/Marine environment protection
7-8
Helsinki (Finland)
TC 44/SC 7
Welding and allied processes/Representation and terms
8
Helsinki (Finland)
TC 44/SC 5
Welding and allied processes/Testing and inspection of welds
8
Helsinki (Finland)
TC 44/SC 9
Welding and allied processes/Health and safety
8
Bath (United
Kingdom)
TC 184/SC 1
Automation systems and integration/Physical device control
8-9
Berlin (Germany)
TC 51
Pallets for unit load method of materials handling
9-10
Helsinki (Finland)
TC 44
Welding and allied processes
14-17
Shanghai (China)
TC 8/SC 8
Ships and marine technology/Ship design
16
Berlin (Germany)
TC 261
Additive manufacturing
31
Arlington (USA)
TC 86/SC 6
Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps
TC 258
Project, programme and portfolio management
August 2015
24-28
Toronto (Canada)
*
25-26
Beijing (China)
TC 36
Cinematography
25-26
London (United
Kingdom)
TC 105
Steel wire ropes
26-28
Jeju (Korea,
Republic of)
TC 206
Fine ceramics
28
Uppsala (Sweden)
TC 46/SC 10
Information and documentation/Requirements for document storage and conditions for preservation
JTC 1/SC 35
Information technology/User interfaces
August-September 2015
31-4
Hokaido (Japan)
*
September 2015
4-12
New Delhi (India)
TC 207
Environmental management
4-12
New Delhi (India)
TC 207/SC 4
Environmental management/Environmental performance evaluation
4-12
New Delhi (India)
TC 207/SC 7
Environmental management/Greenhouse gas management and related activities
7
Teddington
(United Kingdom)
TC 164/SC 2
Mechanical testing of metals/Ductility testing
7-11
Sydney (Australia)
TC 96/SC 9
Cranes/Bridge and gantry cranes
7-11
Tokyo (Japan)
TC 133
Clothing sizing systems - size designation, size measurement methods and digital fittings
7-11
Teddington
(United Kingdom)
TC 164
Mechanical testing of metals
7-14
Sydney (Australia)
TC 96
Cranes
8
Sydney (Australia)
TC 96/SC 3
Cranes/Selection of wire ropes
8-10
Teddington
(United Kingdom)
TC 164/SC 5
Mechanical testing of metals/Fatigue testing
9
Teddington
(United King-
TC 164/SC 1
Mechanical testing of metals/Uniaxial testing
*
dom)
9
Teddington
(United Kingdom)
10
*
TC 164/SC 4
Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)
Teddington
(United Kingdom)
TC 164/SC 3
Mechanical testing of metals/Hardness testing
10
New Delhi (India)
TC 207/SC 1
Environmental management/Environmental management systems
10-11
Oslo (Norway)
TC 265
Carbon dioxide capture, transportation, and geological storage
11
Milan (Italy)
JTC 1/SC 25
Information technology/Interconnection of information technology equipment
11
Sydney (Australia)
TC 96/SC 7
Cranes/Tower cranes
11
Paris (France)
TC 153
Valves
13
Seoul (Korea,
Republic of)
*
President's
committee
President's committee
13
Seattle (USA)
**
TC 201/SC 6
Surface chemical analysis/Secondary ion mass spectrometry
14
Seoul (Korea,
Republic of)
*
COUNCIL
Council
14-15
Washington, D.C
(USA)
*
JTC 1/SC 22
Information technology/Programming languages, their environments and system software interfaces
14-17
Lahaina, Hawaii
(USA)
TC 127
Earth-moving machinery
14-17
Washington, D.C
(USA)
TC 157
Non-systemic contraceptives and STI barrier prophylactics
14-18
Berlin (Germany)
TC 150
Implants for surgery
14-18
Victoria (Canada)
TC 205
Building environment design
14-25
Berlin (Germany)
*
TC 213
Dimensional and geometrical product specifications and verification
15
Seoul (Korea,
Republic of)
*
DEVCO
Committee on developing country matters
15
Vienna (Austria)
TC 33
Refractories
15
Berlin (Germany)
TC 150/SC 5
Implants for surgery/Osteosynthesis and spinal devices
15
Berlin (Germany)
TC 150/SC 7
Implants for surgery/Tissue-engineered medical products
15
Seoul (Korea,
Republic of)
TMB
Technical Management Board
15-17
Pittsburgh (USA)
TC 94/SC 15
Personal safety -- Protective clothing and equipment/Respiratory protective devices
16-18
Seoul (Korea,
Republic of)
GA
General Assembly
17
Seoul (Korea,
Republic of)
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
17
Milan (Italy)
TC 43/SC 2
Acoustics/Building acoustics
17
Kanazawa (Japan)
TC 142
Cleaning equipment for air and other gases
17
Berlin (Germany)
TC 150/SC 4
Implants for surgery/Bone and joint replacements
*
*
17-18
Hangzhou (China)
17-18
**
TC 8/SC 13
Ships and marine technology/Marine technology
Delft (Netherlands)
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
17-18
Victoria (Canada)
TC 163
Thermal performance and energy use in the built environment
18
Milan (Italy)
TC 43
Acoustics
18
Milan (Italy)
*
TC 43/SC 1
Acoustics/Noise
18
Berlin (Germany)
*
TC 146/SC 2
Air quality/Workplace atmospheres
18-19
Hawaii (USA)
TC 23/SC 14
Tractors and machinery for agriculture and forestry/Operator controls, operator symbols and other
displays, operator manuals
20-26
Williamsburg
(USA)
TC 27
Solid mineral fuels
21-23
London (United
Kingdom)
TC 232
Learning services outside formal education
21-24
Cleveland (USA)
TC 82
Mining
21-25
Poznan (Poland)
TC 23/SC 6
Tractors and machinery for agriculture and forestry/Equipment for crop protection
21-25
Delft (Netherlands)
TC 146/SC 6
Air quality/Indoor air
21-25
Johor Bahru
(Malaysia)
TC 165
Timber structures
22
Berlin (Germany)
TC 111/SC 1
Round steel link chains, chain slings, components and accessories/Chains and chain slings
22-25
Beijing (China)
JTC 1/SC 34
Information technology/Document description and processing languages
23
Berlin (Germany)
TC 111/SC 3
Round steel link chains, chain slings, components and accessories/Components and accessories
23-24
(China)
TC 290
Online reputation
24-25
Gouda (Netherlands)
TC 34/SC 11
Food products/Animal and vegetable fats and oils
25
Delft (Netherlands)
TC 146/SC 1
Air quality/Stationary source emissions
28-29
Basel (Switzerland)
**
TC 44/SC 8
Welding and allied processes/Equipment for gas welding, cutting and allied processes
28-30
New York (USA)
*
PC 286
Collaborative business relationship management -- Framework
29
Paris (France)
TC 86/SC 1
Refrigeration and air-conditioning/Safety and environmental requirements for refrigerating systems
29-30
Tokyo (Japan)
*
TC 44/SC 3
Welding and allied processes/Welding consumables
(Europe)
**
TC 22/SC 19
Road vehicles/Wheels
JTC 1/SC 17
Information technology/Cards and personal identification
*
**
**
September-October 2015
21-2
(Austria)
**
27-3
Bangkok (Thailand)
TC 106
Dentistry
28-2
Kuala Lumpur
(Malaysia)
PC 278
Anti-bribery management systems
28-2
Stockholm
(Sweden)
TC 218
Timber
28-2
Edmonton (Canada)
TC 229
Nanotechnologies
TC 39/SC 4
Machine tools/Woodworking machines
October 2015
1
Rome (Italy)
*
1
Bangkok (Thailand)
TC 106/SC 3
Dentistry/Terminology
2
Paris (France)
TC 86/SC 8
Refrigeration and air-conditioning/Refrigerants and refrigeration lubricants
2
Bangkok (Thailand)
TC 106/SC 1
Dentistry/Filling and restorative materials
4-9
New Delhi (India)
TC 61
Plastics
5
Bloomington
(USA)
TC 23/SC 13
Tractors and machinery for agriculture and forestry/Powered lawn and garden equipment
5
Madrid (Spain)
TC 59
Buildings and civil engineering works
5-9
Dublin (Ireland)
*
JTC 1/SC 38
Information technology/Cloud Computing and Distributed Platforms
5-9
Madrid (Spain)
*
TC 59/SC 3
Buildings and civil engineering works/Functional/user requirements and performance in building
construction
5-9
Madrid (Spain)
*
TC 59/SC 15
Buildings and civil engineering works/Performance description of houses
5-9
Madrid (Spain)
*
TC 59/SC 16
Buildings and civil engineering works/Accessibility and usability of the built environment
5-9
Vienna (Austria)
*
TC 190
Soil quality
5-9
Vienna (Austria)
*
TC 190/SC 2
Soil quality/Sampling
5-9
Vienna (Austria)
*
TC 190/SC 3
Soil quality/Chemical methods and soil characteristics
5-9
Vienna (Austria)
*
TC 190/SC 4
Soil quality/Biological methods
5-9
Vienna (Austria)
*
TC 190/SC 7
Soil quality/Soil and site assessment
6
Lyon (France)
*
IULTCS
International Union of Leather Technologists and Chemists Societies
7
Madrid (Spain)
TC 59/SC 2
Buildings and civil engineering works/Terminology and harmonization of languages
8
Virtual (Unknown)
President's
committee
President's committee
8
New Delhi (India)
TC 61/SC 6
Plastics/Ageing, chemical and environmental resistance
8-9
Sao Paulo (Brazil)
TC 58/SC 2
Gas cylinders/Cylinder fittings
8-9
Toronto (Canada)
TC 225
Market, opinion and social research
9
Copenhagen
(Denmark)
TC 254
Safety of amusement rides and amusement devices
12
Beijing (China)
*
TC 20/SC 4
Aircraft and space vehicles/Aerospace fastener systems
12-16
Paris (France)
*
TC 34/SC 17
Food products/Management systems for food safety
12-16
Turin (Italy)
*
TC 70
Internal combustion engines
12-16
Beijing (China)
*
TC 181
Safety of toys
13
New Orleans
(USA)
*
TC 2/SC 14
Fasteners/Surface coatings
13
Beijing (China)
*
TC 20/SC 8
Aircraft and space vehicles/Aerospace terminology
13
Lyon (France)
TC 38/SC 1
Textiles/Tests for coloured textiles and colorants
**
*
13
Lyon (France)
TC 38/SC 2
Textiles/Cleansing, finishing and water resistance tests
13-14
Osaka (Japan)
*
TC 24/SC 4
Particle characterization including sieving/Particle characterization
14
New Orleans
(USA)
*
TC 2/SC 7
Fasteners/Reference standards
14
Lyon (France)
TC 38/SC 23
Textiles/Fibres and yarns
14
Lyon (France)
TC 38/SC 24
Textiles/Conditioning atmospheres and physical tests for textile fabrics
14-15
Beijing (China)
*
TC 20
Aircraft and space vehicles
14-16
Renton (USA)
*
TC 44/SC 14
Welding and allied processes/Welding and brazing in aerospace
15
New Orleans
(USA)
*
TC 2/SC 12
Fasteners/Fasteners with metric internal thread
15
Lyon (France)
TC 38
Textiles
15-17
Seattle (USA)
*
TC 201
Surface chemical analysis
16
New Orleans
(USA)
*
TC 2
Fasteners
16
San Diego (USA) *
TC 22/SC 34
Road vehicles/Propulsion, powertrain and powertrain fluids
18-23
Vichy (France)
TC 45
Rubber and rubber products
18-23
Vichy (France)
TC 45/SC 4
Rubber and rubber products/Products (other than hoses)
18-23
Baltimore (USA)
*
TC 184/SC 4
Automation systems and integration/Industrial data
19-21
Kyoto (Japan)
*
TC 266
Biomimetics
19-21
Jeju (Korea,
Republic of)
*
TC 281
Fine Bubble Technology
19-22
Vichy (France)
TC 45/SC 1
Rubber and rubber products/Rubber and plastics hoses and hose assemblies
19-23
(Germany)
**
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
19-23
Gaithersburg
(USA)
*
TC 92
Fire safety
19-23
Gaithersburg
(USA)
*
TC 92/SC 1
Fire safety/Fire initiation and growth
19-23
Brussels (Belgium)
TC 154
Processes, data elements and documents in commerce, industry and administration
20
Metz (France)
TC 173/SC 2
Assistive products for persons with disability/Classification and terminology
20-21
La Plaine StDenis (France)
TC 23/SC 3
Tractors and machinery for agriculture and forestry/Safety and comfort
20-23
Oslo (Norway)
**
TC 58/SC 3
Gas cylinders/Cylinder design
20-23
Beijing (China)
*
TC 269
Railway applications
21
Dublin (Ireland)
*
TC 279
Innovation management
21-23
Katowize (Poland)
TC 263
Coalbed methane (CBM)
22
Santiago (Chile)
TC 195
Building construction machinery and equipment
22-23
London (United
Kingdom)
TC 79/SC 2
Light metals and their alloys/Organic and anodic oxidation coatings on aluminium
22-23
Berlin (Germany)
TC 209
Cleanrooms and associated controlled environments
26
Arlington (USA)
*
TC 79/SC 6
Light metals and their alloys/Wrought aluminium and aluminium alloys
26-29
Pretoria (South
Africa)
**
TC 264
Fireworks
26-30
St. Petersburg
(Russian Federation)
TC 8
Ships and marine technology
26-30
Porto Alegre
(Brazil)
TC 23/SC 17
Tractors and machinery for agriculture and forestry/Manually portable forest machinery
26-31
(China)
**
JTC 1
Information technology
27-28
Greenville (USA)
*
TC 31/SC 9
Tyres, rims and valves/Valves for tube and tubeless tyres
27-29
Berlin (Germany)
*
TC 256
Pigments, dyestuffs and extenders
28
Arlington (USA)
TC 79/SC 5
Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium
28-30
Tsukuba (Japan)
**
TC 202
Microbeam analysis
29
Seoul (Korea,
Republic of)
*
TC 71
Concrete, reinforced concrete and pre-stressed concrete
29
Washington, D.C
(USA)
TC 79
Light metals and their alloys
29
Silver Spring
(USA)
TC 234
Fisheries and aquaculture
29-30
Tampa, Florida
(USA)
*
TC 17/SC 12
Steel/Continuous mill flat rolled products
Madrid (Spain)
**
TC 10/SC 8
Technical product documentation/Construction documentation
(Netherlands)
**
TC 34/SC 2
Food products/Oleaginous seeds and fruits and oilseed meals
Sao Paulo (Brazil)
**
TC 135/SC 9
Non-destructive testing/Acoustic emission testing
(Germany)
**
TC 244
Industrial furnaces and associated processing equipment
(China)
**
TC 282/SC 3
Water re-use/Risk and performance evaluation of water re-use systems
*
TC 41/SC 3
Pulleys and belts (including veebelts)/Conveyor belts
TC 215
Health informatics
November 2015
2
Atlanta (USA)
2-6
Bern (Switzerland)
2-6
Beijing (China)
*
TC 282
Water re-use
2-8
Seoul (Korea,
Republic of)
**
TC 130
Graphic technology
3
Atlanta (USA)
*
TC 41/SC 1
Pulleys and belts (including veebelts)/Friction
3
Berlin (Germany)
*
TC 83
Sports and other recreational facilities and equipment
3-5
Montreal (Canada)
TC 20/SC 9
Aircraft and space vehicles/Air cargo and ground equipment
3-6
Accra (Ghana)
TC 285
Clean cookstoves and clean cooking solutions
4
Atlanta (USA)
TC 41/SC 4
Pulleys and belts (including veebelts)/Synchronous belt drives
4
(Australia)
**
TC 110/SC 1
Industrial trucks/General terminology
5
Atlanta (USA)
*
TC 41
Pulleys and belts (including veebelts)
6
(Australia)
**
TC 110
Industrial trucks
**
6
(Australia)
**
TC 110/SC 5
Industrial trucks/Sustainability
9-12
Sevilla (Spain)
**
TC 189
Ceramic tile
9-13
London (United
Kingdom)
*
PC 287
Chain of custody of wood and wood-based products
9-13
Kobe (Japan)
*
TC 21
Equipment for fire protection and fire fighting
9-13
Tokyo (Japan)
TC 94/SC 15
Personal safety -- Protective clothing and equipment/Respiratory protective devices
9-13
Sydney (Australia)
*
TC 275
Sludge recovery, recycling, treatment and disposal
9-14
Galveston (USA)
*
TC 260
Human resource management
10-13
(Switzerland)
**
TC 112
Vacuum technology
11
Vicenza (Italy)
*
TC 44/SC 13
Welding and allied processes/Brazing materials and processes
11
Nottingham
(United Kingdom)
*
TC 60
Gears
11-13
(Malaysia)
**
TC 123
Plain bearings
11-13
Geel (Belgium)
TC 212
Clinical laboratory testing and in vitro diagnostic test systems
12-13
Kuala Lumpur
(Malaysia)
**
TC 227
Springs
16
(USA)
**
PC 252
Natural gas fuelling stations for vehicles
16-17
Brasilia (Brazil)
TC 241
Road traffic safety management systems
16-20
Kyoto (Japan)
TC 160
Glass in building
16-20
(USA)
**
TC 210
Quality management and corresponding general aspects for medical devices
16-21
Washington, D.C
(USA)
*
TC 98/SC 3
Bases for design of structures/Loads, forces and other actions
20-28
Hong Kong
(Hong Kong,
China)
*
TC 176
Quality management and quality assurance
23-27
Ardooie (Belgium)
TC 188/SC 1
Small craft/Personal safety equipment
(Netherlands)
**
TC 22/SC 41
Road vehicles/Specific aspects for gaseous fuels
Istanbul (Turkey)
**
TC 120
Leather
November-December 2015
16-21
Virginia (USA)
TC 98
Bases for design of structures
TC 22/SC 31
Road vehicles/Data communication
December 2015
3-4
Auburn Hills
(USA)
3-4
Torrance (USA)
*
TC 197
Hydrogen technologies
10
Berlin (Germany)
*
TC 44/SC 6
Welding and allied processes/Resistance welding and allied mechanical joining
14-18
Berlin (Germany)
TC 198
Sterilization of health care products
Istanbul (Turkey)
**
TC 180
Solar energy
(United Arab
Emirates)
**
TC 217
Cosmetics
Lyon (France)
**
TC 272
Forensic sciences
(Sweden)
**
TC 17/SC 1
Steel/Methods of determination of chemical composition
Dayton, Ohio
(USA)
**
TC 159/SC 3
Ergonomics/Anthropometry and biomechanics
(Indonesia)
**
TC 292
Security
**
TC 172/SC 1
Optics and photonics/Fundamental standards
**
TC 138
Plastics pipes, fittings and valves for the transport of fluids
4th Quarter 2015
2nd Semester 2015
(France)
Month unknown 2015
Berlin (Germany)
January 2016
22
Berlin (Germany)
*
TC 76
Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
25-29
London (United
Kingdom)
**
TC 107
Metallic and other inorganic coatings
25-29
London (United
Kingdom)
**
TC 107/SC 3
Metallic and other inorganic coatings/Electrodeposited coatings and related finishes
25-29
London (United
Kingdom)
**
TC 107/SC 8
Metallic and other inorganic coatings/Chemical conversion coatings
(South Africa)
**
TC 58/SC 4
Gas cylinders/Operational requirements for gas cylinders
(USA)
**
TC 213
Dimensional and geometrical product specifications and verification
(United Kingdom)
**
TC 257
Evaluation of energy savings
Geneva (Switzerland)
**
TMB
Technical Management Board
February 2016
March 2016
3-4
(Unknown)
**
TC 182/SC 1
Geotechnics/Geotechnical investigation and testing
14-18
Kanazawa (Japan)
*
TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
14-18
Sydney (Australia)
**
TC 108/SC 2
Mechanical vibration, shock and condition monitoring/Measurement and evaluation of mechanical
vibration and shock as applied to machines, vehicles and structures
14-18
Sydney (Australia)
**
TC 108/SC 5
Mechanical vibration, shock and condition monitoring/Condition monitoring and diagnostics of
machine systems
17-18
Geneva (Switzerland)
*
COUNCIL
Council
**
TC 67/SC 7
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Offshore structures
1st Quarter 2016
Singapore (Singapore)
April 2016
11-12
Beijing (China)
**
TC 117
Fans
11-15
Sydney (Australia)
**
TC 178
Lifts, escalators and moving walks
12-13
(Europe)
**
TC 67/SC 2
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Pipeline transportation systems
25
Frankfurt (Germany)
**
TC 68/SC 4
Financial services/Securities and related financial instruments
25-29
Berlin (Germany)
**
TC 161
Control and protective devices for gas and/or oil burners and appliances
26
Frankfurt (Germany)
*
TC 68/SC 7
Financial services/Core banking
Toronto (Canada)
**
JTC 1/SC 38
Information technology/Cloud Computing and Distributed Platforms
May 2016
9-13
(USA)
**
TC 276
Biotechnology
22-27
Sapporo (Japan)
*
TC 184/SC 4
Automation systems and integration/Industrial data
25
Brussels (Belgium)
**
TC 115
Pumps
(Brazil)
**
TC 67/SC 4
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and production equipment
(India)
**
TC 85
Nuclear energy, nuclear technologies, and radiological protection
(Korea, Republic
of)
**
TC 122
Packaging
Stockholm
(Sweden)
**
TC 130
Graphic technology
(USA)
**
TC 282/SC 3
Water re-use/Risk and performance evaluation of water re-use systems
*
TMB
Technical Management Board
TC 135
Non-destructive testing
June 2016
15-16
Geneva (Switzerland)
18-20
Munich (Germany)
(Germany)
**
JTC 1/SC 36
Information technology/Information technology for learning, education and training
(Europe)
**
TC 22/SC 38
Road vehicles/Motorcycles and mopeds
St. Petersburg
(Russian Federation)
**
TC 172/SC 4
Optics and photonics/Telescopic systems
Turin (Italy)
**
TC 274
Light and lighting
**
TC 224
Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators
**
TC 34/SC 4
Food products/Cereals and pulses
(France)
**
TC 23
Tractors and machinery for agriculture and forestry
New Delhi (India)
**
TC 34/SC 7
Food products/Spices, culinary herbs and condiments
(China)
**
TC 34/SC 16
Food products/Horizontal methods for molecular biomarker analysis
June-July 2016
27-1
(Unknown)
2nd Quarter 2016
(Germany)
1st Semester 2016
Chennai (India)
**
TC 120
Leather
September 2016
19
Beijing (China)
*
COUNCIL
Council
20
Beijing (China)
*
TMB
Technical Management Board
21-23
Beijing (China)
*
GA
General Assembly
Vienna (Austria)
**
JTC 1/SC 22
Information technology/Programming languages, their environments and system software interfaces
Paris (France)
**
TC 17
Steel
Sao Paulo (Brazil)
**
TC 209
Cleanrooms and associated controlled environments
Shanghai (China)
**
TC 213
Dimensional and geometrical product specifications and verification
Beijing (China)
**
TC 256
Pigments, dyestuffs and extenders
**
TC 289
Brand evaluation
3rd Quarter 2016
(USA)
October 2016
17-21
Berlin (Germany)
**
JTC 1/SC 38
Information technology/Cloud Computing and Distributed Platforms
17-21
(China)
**
TC 5/SC 2
Ferrous metal pipes and metallic fittings/Cast iron pipes, fittings and their joints
20-21
London (United
Kingdom)
*
TC 58
Gas cylinders
(Brazil)
**
TC 59
Buildings and civil engineering works
(Korea, Republic
of)
**
TC 201
Surface chemical analysis
(Israel)
**
TC 282/SC 3
Water re-use/Risk and performance evaluation of water re-use systems
**
JTC 1
Information technology
Delft (Netherlands)
**
TC 28
Petroleum products and related products of synthetic or biological origin
Delft (Netherlands)
**
TC 28/SC 5
Petroleum products and related products of synthetic or biological origin/Measurement of refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels
Delft (Netherlands)
**
TC 28/SC 7
Petroleum products and related products of synthetic or biological origin/Liquid Biofuels
Tel Aviv (Israel)
**
TC 282
Water re-use
(Korea, Republic
of)
**
JTC 1/SC 23
Information technology/Digitally Recorded Media for Information Interchange and Storage
(Russian Federation)
**
REMCO
Committee on reference materials
(Denmark)
**
TC 37
Terminology and other language and content resources
(South Africa)
**
TC 44
Welding and allied processes
November 2016
7-12
Lillehammer
(Norway)
4th Quarter 2016
Month unknown 2016
(Malaysia)
**
TC 45
Rubber and rubber products
Wellington (New
Zealand)
**
TC 46
Information and documentation
Wellington (New
Zealand)
**
TC 46/SC 11
Information and documentation/Archives/records management
(Sweden)
**
TC 102
Iron ore and direct reduced iron
(Japan)
**
TC 138/SC 2
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water
supplies
(Japan)
**
TC 183
Copper, lead, zinc and nickel ores and concentrates
**
TC 29/SC 8
Small tools/Tools for pressing and moulding
**
TC 29
Small tools
**
JTC 1/SC 36
Information technology/Information technology for learning, education and training
**
TC 31
Tyres, rims and valves
London (United
Kingdom)
**
JTC 1/SC 22
Information technology/Programming languages, their environments and system software interfaces
New Delhi (India)
**
TC 178
Lifts, escalators and moving walks
**
TC 289
Brand evaluation
(United Kingdom)
**
TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
Seoul (Korea,
Republic of)
**
TC 161
Control and protective devices for gas and/or oil burners and appliances
**
JTC 1/SC 36
Information technology/Information technology for learning, education and training
(USA)
**
TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
Milan (Italy)
**
TC 161
Control and protective devices for gas and/or oil burners and appliances
April 2017
10
Guilin (China)
May 2017
(Sweden)
June 2017
(Australia)
2nd Quarter 2017
(North America)
September 2017
3rd Quarter 2017
Vienna (Austria)
Month unknown 2017
June 2018
(Korea, Republic
of)
Month unknown 2018