ISO Update
Supplement to ISOfocus
August 2015
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step
towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO
technical committee. When consensus has been reached within the technical committee, the document is sent to the
Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 %
of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International
Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 July to 31 July 2015
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
PC 280
Management Consultancy
ISO/CD 20700
Management consultancy
TC 2
Fasteners
ISO/DTR 20491
Fundamentals of Hydrogen Embrittlement in Steel Fasteners
TC 21
Equipment for fire protection and fire fighting
ISO/CD 6182-12
Fire protection — Automatic sprinkler systems — Part 12: Requirements and test methods
for grooved-end components for steel pipe systems
TC 23
Tractors and machinery for agriculture and forestry
ISO 5395-2:2013/CD
Amd 2
Garden equipment — Safety requirements for
combustion-engine-powered lawnmowers — Part 2: Pedestrian-controlled lawnmowers —
Amendment 2: Cutting means enclosure guards
ISO 5395-3:2013/CD
Amd 2
Garden equipment — Safety requirements for
combustion-engine-powered lawnmowers — Part 3: Ride-on lawnmowers with seated
operator — Amendment 2: Cutting means enclosure guards
TC 29
Small tools
ISO/DTS 13399-70
Cutting tool data representation and exchange — Part 70: Graphical data layout — Layer
settings for tooldesigns
ISO/CD 3364
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole —
Dimensions
TC 34
Food products
ISO/CD 2292
Cocoa beans — Sampling
TC 39
Machine tools
ISO 107917:2014/CD Amd 1
Test conditions for machining centres — Part 7: Accuracy of finished test pieces —
Amendment 1
TC 44
Welding and allied processes
ISO/CD 13916
Welding — Guidance on the measurement of preheating temperature, interpass temperature
and preheat maintenance temperature
ISO/CD 15609-1
Specification and qualification of welding procedures for metallic materials — Welding
procedure specification — Part 1: Arc welding
ISO/CD 17660-1
Welding — Welding of reinforcing steel — Part 1: Load-bearing welded joints
ISO/CD 17660-2
Welding — Welding of reinforcing steel — Part 2: Non load-bearing welded joints
TC 58
Gas cylinders
ISO/CD 20475
Gas cylinders — Bundles of cylinders — Periodic inspection and testing
TC 61
Plastics
ISO/CD 9370
Plastics — Instrumental determination of radiant exposure in weathering tests — General
guidance and basic test method
ISO/CD 19699-1
Plastics — Superabsorbent resin — Cross-linked porous sodium polyacrylate for absorbing
blood — Part 1: Test methods
ISO/CD 19699-2
Plastics — Superabsorbent resin — Cross-linked porous sodium polyacrylate for absorbing
blood — Part 2: General requirements
TC 69
Applications of statistical methods
ISO/CD 11843-7
Capability of detection — Part 7: Methodology based on stochastic properties of instrumental
noise
ISO/CD 16355-2
Application of statistical and related methods to New technology and Product Development
Process — Part 2: Acquisition of Non-quantitative VOC or VOS
ISO/CD 16355-4
Application of statistical and related methods to New technology and Product Development
Process — Part 4: Analysis of Non-Quantitative and Quantitative VOC/VOS
TC 71
Concrete, reinforced concrete and pre-stressed concrete
ISO/CD 19595
Natural aggregates for concrete
ISO/CD 19596
Admixtures for concrete
ISO/DTS 16774-2
Test Methods for repair materials for water-leakage cracks in concrete structures — Part 2:
Test method for chemical resistance
ISO/DTS 16774-3
Test Methods for repair materials for water-leakage cracks in concrete structures — Part 3:
Test method for water (washed out) resistance
ISO/DTS 16774-4
Test Methods for repair materials for water-leakage cracks in concrete structures — Part 4:
Test method for adhesion on the wet substrate
TC 76
Transfusion, infusion and injection, and blood processing
equipment for medical and pharmaceutical use
ISO/CD 8536-6
Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles
TC 87
Cork
ISO/CD 633
Cork — Vocabulary
TC 96
Cranes
ISO/CD 18467
Cranes — Safety requirements for offshore cranes
TC 107
Metallic and other inorganic coatings
ISO/CD 19496-1
Vitreous and porcelain enamels - Terminology — Part 1: Terms and definitions
ISO/CD 19496-2
Vitreous and porcelain enamels — Terminology — Part 2: Visual representations and
descriptions
ISO/CD 28706-2
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part
2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids,
alkaline liquids and/or their vapours
TC 120
Leather
ISO/CD TR 2822-2
Raw cattle hides and calf skins — Part 2: Guidelines for grading on the basis of mass
TC 130
Graphic technology
ISO/CD 19594
Page pull test to determine book binding quality
TC 131
Fluid power systems
ISO/CD 6164
Hydraulic fluid power — Four-screw, one-piece square-flange connections for use at
pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
TC 134
Fertilizers and soil conditioners
ISO/CD 19670
Fertilizers and soil conditioners — Urea aldehyde slow release fertilizer — General
requirements
ISO/CD 19745
Determination of Crude (Free) water content of Ammoniated Phosphate products — DAP,
MAP — by gravimetric vacuum oven at 50 °C
ISO/CD 19747
Determination of Soluble Silicon Concentrations in Nonliquid Fertilizer Materials
ISO/CD 19822
Determination of Humic and Fulvic Acids in Commercial Solid and Liquid Humic Products
using Alkaline Extraction, Hydrophobic Adsorbent Resin and Gravimetric Determination
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO/CD 11298-2
Plastics piping systems for renovation of underground water supply networks — Part 2:
Lining with continuous pipes
TC 146
Air quality
ISO/CD 20581
Workplace air — General requirements for the performance of procedures for the
measurement of chemical agents
TC 156
Corrosion of metals and alloys
ISO/CD 18897
Corrosion of metals and alloys — Standard test method for particle-free erosion corrosion of
metallic materials by jet-in-slit
ISO/CD 20728
Corrosion of metal and alloys — Determination of resistance of magnesium alloys to stress
corrosion cracking
TC 172
Optics and photonics
ISO/CD 13666
Ophthalmic optics — Spectacle lenses — Vocabulary
ISO/CD 11553-1
Safety of machinery — Laser processing machines — Part 1: General safety requirements
ISO/CD 11553-2
Safety of machinery — Laser processing machines — Part 2: Safety requirements for handheld laser processing devices
TC 201
Surface chemical analysis
ISO/DTR 19693
Surface chemical anlysis — Characterization of substrates for biosensing application
TC 206
Fine ceramics
ISO/CD 14705
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for
hardness of monolithic ceramics at room temperature
ISO/CD 18753
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of
absolute density of ceramic powders by pyknometer
TC 215
Health informatics
ISO/DTS 16843-1
Health Informatics — Categorial structures for representation of acupuncture — Part 1:
Acupuncture points
ISO/DTS 20443
Health informatics — Identification of Medicinal Products — Implementation Guide for ISO
11615 Data elements and structures for the unique identification and exchange of regulated
medicinal product information
ISO/DTS 20451
Health informatics — Identification of medicinal products — implementation guide for ISO
11616 data elements and structures for the unique identification and exchange of regulated
pharmaceutical product information
TC 229
Nanotechnologies
ISO/DTR 18196
Nanotechnologies — Measurement method matrix for manufactured nano-objects
ISO/DTS 80004-11
Nanotechnologies — Vocabulary — Part 11: Nanolayer, nanocoating, nanofilm, and related
terms
TC 249
Traditional chinese medicine
ISO/CD 19610
Traditional Chinese medicine — Requirements for industrial manufacturing process of red
ginseng
ISO/CD 19824
Traditional Chinese Medicine — Schisandra Chinensis seeds and seedlings
TC 269
Railway applications
ISO/CD 19659-1
Railway Applications - Heating, Ventilation and Air Conditioning Systems for Rolling Stock —
Part 1: Terms and definitions
JTC 1
Information technology
ISO/IEC 103736/PDAM 4
Identification cards — Test methods — Part 6: Proximity cards — Amendment 4:
Conformance test plan
ISO/IEC PDTR
19249
Catalogue of architectural and design principles for secure products, systems, and
applications
ISO/IEC CD 19592-2
Information technology — Security techniques — Secret sharing — Part 2: Fundamental
mechanisms
ISO/IEC CD 29003
Information technology — Security techniques — Identity proofing
ISO/IEC 1449627:2009/PDAM 7
Information technology — Coding of audio-visual objects — Part 27: 3D Graphics
conformance — Amendment 7: Printing material and 3D graphics coding for browsers
conformance
ISO/IEC 230083/PDAM 3
Information technology — High efficiency coding and media delivery in heterogeneous
environments — Part 3: 3D audio — Amendment 3: MPEG-H 3D Audio Phase 2
ISO/IEC CD 30114-1
Information technology — Extensions of Office Open XML File Formats — Part 1: Guidelines
ISO/IEC PDTR
38503
Information technology — governance of IT — Guidance on the audit of the governance of IT
DIS circulated
Period from 01 July to 31 July 2015
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote
terminates
TC 2
ISO/DIS 16228
Fasteners
* Fasteners — Inspection documents
TC 6
ISO/DIS 12625-4
2015-10-10
Paper, board and pulps
*
Tissue paper and tissue products — Part 4: Determination of tensile strength,
stretch at maximum force and tensile energy absorption
2016-01-01
(Revision of ISO 12625-4:2005)
ISO/DIS 12625-5
*
Tissue paper and tissue products — Part 5: Determination of wet tensile
strength
2016-01-01
(Revision of ISO 12625-5:2005)
ISO/DIS 12625-6
* Tissue paper and tissue products — Part 6: Determination of grammage
2016-01-01
(Revision of ISO 12625-6:2005)
TC 8
ISO/DIS 3078
Ships and marine technology
* Shipbuilding — Cargo winches
2015-10-14
(Revision of ISO 3078:1987)
ISO/DIS 19357
*
Ships and marine technology — Marine cranes — Design requirements for
ice zones
2015-10-09
ISO/DIS 19360
*
Ships and marine technology — Marine cranes — Technical requirements for
rigging applications
2015-10-14
ISO/DIS 18421
*
Ships and marine technology — Inland navigation vessels — Lifebuoy
housings
2015-09-07
(Revision of ISO 18421:2013)
TC 17
ISO/DIS 3575
Steel
*
Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet
of commercial and drawing qualities
2015-10-21
(Revision of ISO 3575:2011)
ISO/DIS 13976
* Hot-rolled steel sheet in coils of structural quality and heavy thickness
2015-10-21
(Revision of ISO 13976:2005)
TC 20
ISO/DIS 27852
Aircraft and space vehicles
* Space systems — Estimation of orbit lifetime
2015-10-28
(Revision of ISO 27852:2011)
TC 21
ISO/DIS 6182-14
Equipment for fire protection and fire fighting
*
TC 22
Fire protection — Automatic sprinkler systems — Part 14: Requirements and
test methods for water spray nozzles
2015-10-29
Road vehicles
ISO/DIS 13400-4
*
Road vehicles - Diagnostic communication over Internet Protocol (DoIP) —
Part 4: Ethernet Diagnostic Connector
2015-10-08
ISO/DIS 15031-3
Road vehicles — Communication between vehicle and external equipment
* for emissions-related diagnostics — Part 3: Diagnostic connector and related
electrical circuits: specification and use
2015-10-09
(Revision of ISO 15031-3:2004)
ISO/DIS 18300.2
*
TC 31
ISO/DIS 18106
Electrically propelled road vehicles — Specifications for lithium-ion battery
systems combined with lead acid battery or capacitor
2015-09-15
Tyres, rims and valves
*
TC 34
Passenger car, commercial vehicle, truck and bus tyres — Methods for
measuring snow grip performance — Loaded new tyres
2015-10-14
Food products
ISO/DIS 20633
*
Infant formula and adult nutritionals — Determination of vitamin E and vitamin
A by normal phase high performance liquid chromatography
2015-10-09
ISO/DIS 20634
*
Infant formula and adult nutritionals — Determination of vitamin B12 by
reversed phase high performance liquid chromatography (RP-HPLC)
2015-10-09
ISO/DIS 20637
*
Infant formula and adult nutritionals — Determination of myo-inositol by liquid
chromatography and pulsed amperometry
2015-10-09
ISO/DIS 20638
* Infant formula — Determination of nucleotides by liquid chromatography
2015-10-09
ISO/DIS 20639
Infant formula and adult nutritionals — Determination of pantothenic acid by
* ultra-performance liquid chromatography and tandem mass spectrometry
method (UHPLC-MS/MS)
2015-10-09
ISO/DIS 16958
*
Milk products and infant formulae — Determination of fatty acid content —
Capillary gas chromatographic method
2015-10-09
ISO/DIS 20647
*
Infant formula and adult nutritionals — Determination of total iodine by
inductively coupled plasma mass spectrometry (ICP-MS)
2016-01-01
ISO/DIS 20649
Infant formula and adult nutritionals — Determination of chromium, selenium
* and molybdenum by inductively coupled plasma mass spectrometry (ICPMS)
TC 35
ISO/DIS 11126-10
2016-01-01
Paints and varnishes
*
Preparation of steel substrates before application of paints and related
products — Specifications for non-metallic blast-cleaning abrasives — Part
2015-10-10
10: Almandite garnet
(Revision of ISO 11126-10:2000)
TC 39
ISO/DIS 16092-3
Machine tools
*
TC 44
ISO/DIS 10675-1
Machine tools safety — Presses — Part 3: Sarety requirements for hydraulic
presses
2015-10-10
Welding and allied processes
*
Non-destructive testing of welds — Acceptance levels for radiographic testing
— Part 1: Steel, nickel, titanium and their alloys
2015-10-03
(Revision of ISO 10675-1:2008)
TC 45
ISO/DIS 1401
Rubber and rubber products
* Rubber hoses for agricultural spraying
2015-10-03
(Revision of ISO 1401:1999)
ISO/DIS 2398
* Rubber hoses, textile-reinforced, for compressed air — Specification
2015-10-03
(Revision of ISO 2398:2006)
ISO/DIS 7751
*
Rubber and plastics hoses and hose assemblies — Ratios of proof and burst
pressure to maximum working pressure
2015-10-03
(Revision of ISO 7751:1991, ISO 7751:1991/Amd 1:2011)
ISO/DIS 8028
*
Rubber and/or plastics hoses and hose assemblies for airless paint spraying
— Specification
2015-10-10
(Revision of ISO 8028:1999)
ISO/DIS 8033
*
Rubber and plastics hoses — Determination of adhesion between
components
2015-10-03
(Revision of ISO 8033:2006)
ISO/DIS 37
*
Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain
properties
2015-10-23
(Revision of ISO 37:2011)
ISO/DIS 11344.2
*
Rubber, raw synthetic — Determination of the molecular-mass distribution of
solution polymers by gel permeation chromatography
2015-09-21
(Revision of ISO 11344:2004, ISO 11344:2004/Cor 1:2008)
TC 46
ISO/DIS 18461
Information and documentation
* International museum statistics
TC 58
ISO/DIS 11114-4
2015-10-07
Gas cylinders
Transportable gas cylinders — Compatibility of cylinder and valve materials
* with gas contents — Part 4: Test methods for selecting steels resistant to
hydrogen embrittlement
2015-10-10
(Revision of ISO 11114-4:2005)
ISO/DIS 18119
*
Gas cylinders — Seamless steel and seamless aluminium-alloy gas cylinders
and tubes --- Periodic inspection and testing
2015-10-03
(Revision of ISO 6406:2005, ISO 10461:2005, ISO 10461:2005/Amd 1:2006)
ISO/DIS 24431
*
Gas cylinders — Cylinders for compressed and liquefied gases (excluding
acetylene) — Inspection at time of filling
2015-10-03
(Revision of ISO 24431:2006)
TC 60
ISO/DIS 23509
Gears
* Bevel and hypoid gear geometry
2015-10-31
(Revision of ISO 23509:2006)
Materials, equipment and offshore structures for
petroleum, petrochemical and natural gas
industries
TC 67
ISO/DIS 14224
*
Petroleum, petrochemical and natural gas industries — Collection and
exchange of reliability and maintenance data for equipment
2015-10-03
(Revision of ISO 14224:2006)
ISO/DIS 18647
* Specifications for offshore modular drilling rigs on fixed platforms
Concrete, reinforced concrete and pre-stressed
concrete
TC 71
ISO/DIS 1920-2
2016-01-01
* Testing of concrete — Part 2: Properties of fresh concrete
2015-10-28
(Revision of ISO 1920-2:2005)
TC 79
ISO/DIS 18762
Light metals and their alloys
*
2015-10-07
Sports and other recreational facilities and
equipment
TC 83
ISO/DIS 10256-1
Tubes of titanium and titanium alloys — Welded tubes for condensers and
heat exchangers — Technical deliverly conditions
* Protective equipment for use in ice hockey — Part 1: General requirements
2015-10-10
(Revision of ISO 10256:2003)
Protective equipment for use in ice hockey — Part 2: Head protection for
skaters
ISO/DIS 10256-2
*
ISO/DIS 10256-3
* Protective equipment for use in ice hockey — Part 3: Face Protectors
ISO/DIS 10256-4
*
TC 94
ISO/DIS 16900-5
TC 102
ISO/DIS 15968
Protective equipment for use in ice hockey — Part 4: Head and face
protection for goalkeepers
2015-10-10
2015-10-10
2016-01-01
Personal safety -- Protective clothing and
equipment
Respiratory protective devices — Methods of test and test equipment — Part
* 5: Breathing machine/metabolic simulator/RPD headforms/torso, tools and
verification tools
2015-10-28
Iron ore and direct reduced iron
* Direct reduced iron — Determination of apparent density and water
2015-10-14
absorption of hot briquetted iron (HBI)
(Revision of ISO 15968:2000)
TC 104
ISO 668:2013/DAmd
1
Freight containers
*
*
TC 121
ISO
18082:2014/DAmd 1
Anaesthetic and respiratory equipment — Dimensions of non* interchangeable screw-threaded (NIST) low-pressure connectors for medical
gases — Amendment 1
* Earth-moving machinery — Quick couplers — Safety
2015-10-10
2015-10-21
Fluid power systems
*
TC 156
ISO/DIS 12473
2015-10-07
Earth-moving machinery
TC 131
ISO/DIS 18582-1
Methods for the calibration of vibration and shock transducers — Part 1:
Basic concepts — Amendment 1
Anaesthetic and respiratory equipment
TC 127
ISO/DIS 13031
2015-09-23
Mechanical vibration, shock and condition
monitoring
TC 108
ISO 160631:1998/DAmd 1
Series 1 freight containers — Classification, dimensions and ratings —
Amendment 1
Fluid power — Specification of reference dictionary — Part 1: General
overview on organization and structure
2015-10-15
Corrosion of metals and alloys
* General principles of cathodic protection in seawater
2015-10-07
(Revision of ISO 12473:2006)
TC 159
ISO/DIS 9241-112
Ergonomics
*
*
Safety and control devices for gas burners and gas-burning appliances —
Particular Requirements — Part 8: Multifunctional controls
2015-10-07
Thermal performance and energy use in the built
environment
TC 163
ISO/DIS 10077-2
2015-10-10
Control and protective devices for gas and/or oil
burners and appliances
TC 161
ISO/DIS 23551-8
Ergonomics of human-system interaction — Part 112: Principles for the
presentation of information
*
Thermal performance of windows, doors and shutters — Calculation of
thermal transmittance — Part 2: Numerical method for frames
2015-10-03
(Revision of ISO 10077-2:2012, ISO 10077-2:2012/Cor 1:2012)
ISO/DIS 52018-1
Energy performance of buildings — Indicators for partial EPB requirements
* related to thermal energy balance and fabric features — Part 1: Overview of
options
ISO/DIS 52022-1
*
Energy performance of buildings — Thermal, solar and daylight properties of
building components and elements — Part 1: Simplified calculation method of
2015-10-03
2015-10-03
the solar and daylight characteristics for solar protection devices combined
with glazing
ISO/DIS 52022-3
Energy performance of buildings — Thermal, solar and daylight properties of
building components and elements — Part 3: Detailed calculation method of
*
the solar and daylight characteristics for solar protection devices combined
with glazing
2015-10-03
ISO/DIS 17749
* Thermal insulation products - Sheep wool mat and board
2015-10-31
TC 164
ISO/DIS 27306
Mechanical testing of metals
*
Metallic materials — Method of constraint loss correction of CTOD fracture
toughness for fracture assessment of steel components
2015-10-30
(Revision of ISO 27306:2009)
ISO/DIS 12106
* Metallic materials — Fatigue testing — Axial-strain-controlled method
2015-10-21
(Revision of ISO 12106:2003)
TC 165
ISO/DIS 19049
Timber structures
*
TC 170
ISO/DIS 7153-1
Timber structures — Diaphragms — Static load tests for horizontal
diaphragms including floors and roofs
2015-09-07
Surgical instruments
* Surgical instruments — Materials — Part 1: Metals
2015-10-10
(Revision of ISO 7153-1:1991, ISO 7153-1:1991/Amd 1:1999)
TC 171
Document management applications
ISO/DIS 32000-2.2
Document management — Portable document format — Part 2: PDF 2.0
TC 172
Optics and photonics
IEC 80601-258:2014/DAmd 1
Medical electrical equipment — Part 2-58: Particular requirements for basic
safety and essential performance of lens removal devices and vitrectomy
devices for ophthalmic surgery — Amendment 1: Proposed Horizontal
Standard
TC 182
Geotechnics
ISO/DIS 18674-2
Geotechnical investigation and testing — Geotechnical monitoring by field
* instrumentation — Part 2: Measurement of displacements along a line:
Extensometers
TC 190
ISO/DIS 11504
2015-09-17
2015-10-31
2015-10-10
Soil quality
*
Soil quality — Assessment of impact from soil contaminated with petroleum
hydrocarbons
2016-01-01
(Revision of ISO 11504:2012)
ISO/DIS 19204
*
TC 198
ISO/DIS 11137-3
Soil quality — Procedure for site-specific ecological risk assessment of soil
contamination (TRIAD approach)
2015-10-28
Sterilization of health care products
*
Sterilization of health care products — Radiation — Part 3: Guidance on
dosimetric aspects of development, validation and routine control
2015-10-03
(Revision of ISO 11137-3:2006)
TC 202
ISO/DIS 19214
Microbeam analysis
*
TC 204
ISO/DIS 14817-3
*
Intelligent transport systems — ITS central data dictionaries — Part 3: Object
identifier assignments for ITS data concepts
2015-10-24
Fine ceramics
Fine ceramics (advanced ceramics, advanced technical ceramics) —
* Mechanical properties of ceramic composites at room temperature —
Determination of elastic properties by an ultrasonic technique
2015-10-09
Quality management and corresponding general
aspects for medical devices
TC 210
ISO/DIS 15225
2015-10-29
Intelligent transport systems
TC 206
ISO/DIS 18610
Guidelines for growth direction determination of wirelike crystals by
transmission electron microscopy
*
Medical devices — Quality management — Medical device nomenclature
data structure
2015-10-24
(Revision of ISO 15225:2010)
ISO/DIS 80369-1
*
Small-bore connectors for liquids and gases in healthcare applications —
Part 1: General requirements
2015-10-24
(Revision of ISO 80369-1:2010)
ISO/DIS 80369-2
*
Dimensional and geometrical product
specifications and verification
TC 213
ISO/DIS 8062-4.2
Small bore connectors for liquids and gases in healthcare applications — Part
2015-10-31
2: Connectors for breathing systems and driving gases applications
Geometrical product specifications (GPS) — Dimensional and geometrical
* tolerances for moulded parts — Part 4: General tolerances for castings using
profile tolerancing in a general datum system
TC 215
Health informatics
IEC/DIS 82304-1
Health software — Part 1: General requirements for product safety
TC 216
Footwear
ISO/DIS 20863
* Footwear — Test methods for stiffeners and toepuffs — Bondability
2015-09-22
2015-10-24
(Revision of ISO 20863:2004)
TC 258
ISO/DIS 21505
Project, programme and portfolio management
* Project, programme and portfolio management — Guidance on governance
Carbon dioxide capture, transportation, and
geological storage
TC 265
ISO/DIS 27913
2015-10-07
*
Carbon dioxide capture, transportation and geological storage — Pipeline
transportation systems
2015-10-07
TC 266
ISO/DIS 18457
Biomimetics
* Biomimetics — Biomimetic materials, structures and components
TMBG
ISO/IEC DGuide 17.2
2015-10-21
Technical Management Board - groups
*
JTC 1
Guide for writing standards taking into account the needs of micro, small and
medium-sized enterprises
Information technology
Information technology — Universal Coded Character Set (UCS) —
Amendment 2: Bhaiksuki, Marchen, Tangut, and other characters
ISO/IEC
10646:2014/DAmd 2
*
ISO/IEC DIS 14651
Information technology — International string ordering and comparison —
* Method for comparing character strings and description of the common
template tailorable ordering
2015-10-07
2015-10-21
(Revision of ISO/IEC 14651:2011)
ISO/IEC DIS 14888-3
*
Information technology — Security techniques — Digital signatures with
appendix — Part 3: Discrete logarithm based mechanisms
2015-10-28
(Revision of ISO/IEC 14888-3:2006, ISO/IEC 14888-3:2006/Cor 1:2007,
ISO/IEC 14888-3:2006/Cor 2:2009, ISO/IEC 14888-3:2006/Amd 1:2010,
ISO/IEC 14888-3:2006/Amd 2:2012)
ISO/IEC DIS 15946-1
*
Information technology — Security techniques — Cryptographic techniques
based on elliptic curves — Part 1: General
2015-10-29
(Revision of ISO/IEC 15946-1:2008, ISO/IEC 15946-1:2008/Cor 1:2009)
ISO/IEC DIS 24760-3
*
Information technology — Security techniques — A framework for identity
management — Part 3: Practice
2015-10-29
ISO/IEC DIS 27034-6
*
Information technology — Security techniques — Application security — Part
6: Security guidance for specific applications
2015-10-28
ISO/IEC DIS 27035-1
*
Information technology — Security techniques — Information security
incident management — Part 1: Principles of incident management
2015-10-28
(Revision of ISO/IEC 27035:2011)
ISO/IEC DIS 27035-2
Information technology — Security techniques — Information security
* incident management — Part 2: Guidelines to plan and prepare for incident
response
2015-10-28
(Revision of ISO/IEC 27035:2011)
ISO/IEC DIS 29146
*
Information technology - Security techniques - A framework for access
management
ISO/IEC DIS 29192-5
*
Information technology — Security techniques — Lightweight cryptography —
2015-10-28
Part 5: Hash-functions
ISO/IEC 230014:2014/DAmd 1
*
Information technology — MPEG systems technologies — Part 4: Codec
configuration representation — Amendment 1: Parser Instantiation from BSD
ISO/IEC 230085:2015/DAmd 1
Information technology — High efficiency coding and media delivery in
heterogeneous environments — Part 5: Reference software for high
*
efficiency video coding — Amendment 1: Reference software for format
range extensions profiles
ISO/IEC 230085:2015/DAmd 2
*
Information technology — High efficiency coding and media delivery in
heterogeneous environments — Part 5: Reference software for high
2015-10-28
2015-10-10
2015-10-07
2015-10-07
efficiency video coding — Amendment 2: Reference Software for the
Multiview Main Profile of HEVC
ISO/IEC DIS 30105-1
Information technology — IT Enabled Services/Business Process
* Outsourcing (ITESBPO) Lifecycle Processes — Part 1: Process Reference
Model (PRM)
2015-10-10
FDIS circulated
Period from 01 July to 31 July 2015
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the
date shown
* Available in English only
Vote
terminates
TC 2
ISO/FDIS 2320
Fasteners
* Fasteners — Prevailing torque steel nuts — Functional properties
2015-09-17
(Revision of ISO 2320:2008)
TC 10
ISO/FDIS 18388
Technical product documentation
*
TC 17
ISO/FDIS 6935-2
Technical product documentation (TPD) — Relief grooves — Types and
dimensioning
2015-09-24
Steel
* Steel for the reinforcement of concrete — Part 2: Ribbed bars
2015-09-07
(Revision of ISO 6935-2:2007)
TC 20
ISO/FDIS 16699
Aircraft and space vehicles
* Space systems — Disposal of orbital launch stages
TC 22
2015-09-09
Road vehicles
ISO/FDIS 17536-1
*
Road vehicles — Aerosol separator performance test for internal
combustion engines — Part 1: General
ISO/FDIS 17449
*
Road vehicles — Safety glazing materials — Test methods for properties of
2015-09-24
electrically heated glazing
ISO/FDIS 15500-1
*
Road vehicles — Compressed natural gas (CNG) fuel system components
— Part 1: General requirements and definitions
2015-09-18
2015-10-01
(Revision of ISO 15500-1:2000, ISO 15500-1:2000/Amd 1:2003)
ISO/FDIS 15500-7
*
Road vehicles — Compressed natural gas (CNG) fuel system components
— Part 7: Gas injector
2015-10-01
(Revision of ISO 15500-7:2002)
ISO/FDIS 15500-8
*
Road vehicles — Compressed natural gas (CNG) fuel system components
— Part 8: Pressure indicator
(Revision of ISO 15500-8:2001)
2015-10-01
ISO/FDIS 15500-10
*
Road vehicles — Compressed natural gas (CNG) fuel system components
— Part 10: Gas-flow adjuster
2015-10-01
(Revision of ISO 15500-10:2001)
ISO/FDIS 15500-11
*
Road vehicles — Compressed natural gas (CNG) fuel system components
— Part 11: Gas/air mixer
2015-10-01
(Revision of ISO 15500-11:2001)
ISO/FDIS 15500-12
*
Road vehicles — Compressed natural gas (CNG) fuel system components
— Part 12: Pressure relief valve (PRV)
2015-10-01
(Revision of ISO 15500-12:2001)
ISO/FDIS 15500-20
*
Road vehicles — Compressed natural gas (CNG) fuel system components
— Part 20: Rigid fuel line in material other than stainless steel
2015-10-01
(Revision of ISO 15500-20:2007)
Tractors and machinery for agriculture and
forestry
TC 23
ISO/FDIS 13460-1
*
Agricultural irrigation equipment — Plastics saddles — Part 1: Polyethylene
2015-09-21
pressure pipes
(Revision of ISO 13460:1998)
Petroleum products and related products of
synthetic or biological origin
TC 28
ISO/FDIS 4263-3
Petroleum and related products — Determination of the ageing behaviour
* of inhibited oils and fluids using the TOST test — Part 3: Anhydrous
procedure for synthetic hydraulic fluids
2015-09-24
(Revision of ISO 4263-3:2010)
TC 35
ISO/FDIS 4630
Paints and varnishes
* Clear liquids — Estimation of colour by the Gardner colour scale
2015-10-01
(Revision of ISO 4630-1:2004, ISO 4630-2:2004)
ISO/FDIS 6271
* Clear liquids — Estimation of colour by the platinum-cobalt colour scale
2015-10-01
(Revision of ISO 6271-1:2004, ISO 6271-2:2004)
TC 38
Textiles
ISO/FDIS 16373-1
*
Textiles — Dyestuffs — Part 1: General principles of testing coloured
textiles for dyestuff identification
2015-10-01
ISO/FDIS 18074.2
*
Textiles — Identification of some animal fibres by DNA analysis method —
Cashmere, wool, yak and their blends
2015-09-21
TC 39
ISO/FDIS 16089
Machine tools
* Machine tools — Safety — Stationary grinding machines
TC 41
ISO/FDIS 283
2015-09-03
Pulleys and belts (including veebelts)
*
Textile conveyor belts — Full thickness tensile strength, elongation at
break and elongation at the reference load — Test method
2015-09-24
(Revision of ISO 283:2007)
ISO/FDIS 7622-2
*
Steel cord conveyor belts — Longitudinal traction test — Part 2:
Measurement of tensile strength
2015-10-01
(Revision of ISO 7622-2:1984)
TC 45
ISO/FDIS 1436
Rubber and rubber products
*
Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic
types for oil-based or water-based fluids — Specification
2015-09-09
(Revision of ISO 1436:2009, ISO 1436:2009/Cor 1:2010)
ISO/FDIS 3862
Rubber hoses and hose assemblies — Rubber-covered spiral-wire* reinforced hydraulic types for oil-based or water-based fluids —
Specification
2015-09-09
(Revision of ISO 3862:2009)
ISO/FDIS 4079
*
Rubber hoses and hose assemblies — Textile-reinforced hydraulic types
for oil-based or water-based fluids — Specification
2015-09-25
(Revision of ISO 4079:2009)
ISO/FDIS 705
*
Rubber latex — Determination of density between 5 degrees C and 40
degrees C
2015-09-07
(Revision of ISO 705:1994)
TC 58
ISO/FDIS 11623
Gas cylinders
* Gas cylinders — Composite construction — Periodic inspection and testing
2015-09-03
(Revision of ISO 11623:2002)
TC 59
Buildings and civil engineering works
ISO/FDIS 19861
*
Buildings and civil engineering works — Sealants — Determination of
curing behaviour
2015-09-03
ISO/FDIS 19862
*
Buildings and civil engineering works — Sealants — Durability to extension
compression cycling under accelerated weathering
2015-09-21
TC 61
ISO/FDIS 20200
Plastics
*
Plastics — Determination of the degree of disintegration of plastic materials
2015-09-17
under simulated composting conditions in a laboratory-scale test
(Revision of ISO 20200:2004)
ISO/FDIS 18263-2
Plastics — Mixtures of polypropylene (PP) and polyethylene (PE) recyclate
* derived from PP and PE used for flexible and rigid consumenr packaging
— Part 2: Preparation of test specimens and determination of properties
2015-09-14
ISO/FDIS 6383-1
*
Plastics — Film and sheeting — Determination of tear resistance — Part 1:
Trouser tear method
2015-10-01
(Revision of ISO 6383-1:1983)
ISO 2078:1993/FDAmd
1
* Textile glass — Yarns — Designation — Amendment 1
(Revision of ISO 2078:1993)
2015-09-03
ISO
15039:2003/FDAmd 1
* Textile-glass rovings — Determination of solubility of size — Amendment 1
2015-09-07
(Revision of ISO 15039:2003)
Concrete, reinforced concrete and pre-stressed
concrete
TC 71
ISO/FDIS 17785-1
* Testing methods for pervious concrete — Part 1: Infiltration rate
2015-09-21
Transfusion, infusion and injection, and blood
processing equipment for medical and
pharmaceutical use
TC 76
Injection containers and accessories — Part 1: Injection vials made of
glass tubing — Amendment 1
ISO 83621:2009/FDAmd 1
*
ISO/FDIS 15378
Primary packaging materials for medicinal products — Particular
* requirements for the application of ISO 9001:2008, with reference to Good
Manufacturing Practice (GMP)
2015-09-03
2015-09-03
(Revision of ISO 15378:2011)
Sports and other recreational facilities and
equipment
TC 83
ISO/FDIS 8061
* Alpine ski-bindings — Selection of release torque values
2015-09-21
(Revision of ISO 8061:2004, ISO 8061:2004/Amd 1:2006)
ISO/FDIS 11088
*
Assembly, adjustment and inspection of an alpine ski/binding/boot (S-B-B)
system
2015-09-30
(Revision of ISO 11088:2006)
Nuclear energy, nuclear technologies, and
radiological protection
TC 85
ISO/FDIS 8769
*
Reference sources — Calibration of surface contamination monitors —
Alpha-, beta- and photon emitters
2015-09-14
(Revision of ISO 8769:2010)
ISO/FDIS 15382
*
Radiological protection — Procedures for monitoring the dose to the lens of
2015-09-21
the eye, the skin and the extremities
(Revision of ISO 15382:2002)
ISO/FDIS 21909-1
*
Passive neutron dosimetry systems — Part 1: Performance and test
requirements for personal dosimetry
2015-09-21
(Revision of ISO 21909:2005, ISO 21909:2005/Cor 1:2007)
TC 86
ISO/FDIS 23953-1
Refrigeration and air-conditioning
* Refrigerated display cabinets — Part 1: Vocabulary
2015-09-03
(Revision of ISO 23953-1:2005, ISO 23953-1:2005/Amd 1:2012)
ISO/FDIS 23953-2
*
Refrigerated display cabinets — Part 2: Classification, requirements and
test conditions
2015-09-03
(Revision of ISO 23953-2:2005, ISO 23953-2:2005/Amd 1:2012)
TC 96
ISO/FDIS 20332
Cranes
* Cranes — Proof of competence of steel structures
2015-09-07
(Revision of ISO 20332:2008)
TC 106
Dentistry
ISO
13017:2012/FDAmd 1
* Dentistry — Magnetic attachments — Amendment 1
2015-09-03
ISO/FDIS 15912
* Dentistry — Refractory investment and die material
2015-09-24
(Revision of ISO 15912:2006, ISO 15912:2006/Amd 1:2011)
ISO/FDIS 22674
*
Dentistry — Metallic materials for fixed and removable restorations and
appliances
2015-09-24
(Revision of ISO 22674:2006)
ISO/FDIS 18397
* Dentistry — Powered scaler
2015-09-24
(Revision of ISO 15606:1999, ISO 22374:2005)
TC 107
ISO/FDIS 28721-2
Metallic and other inorganic coatings
Vitreous and porcelain enamels — Glass-lined apparatus for process
* plants — Part 2: Designation and specification of resistance to chemical
attack and thermal shock
2015-10-01
(Revision of ISO 28721-2:2008)
ISO/FDIS 28721-4
Vitreous and porcelain enamels — Glass-lined apparatus for process
* plants — Part 4: Quality requirements for glass-lined flanged steel pipes
and flanged steel fittings
2015-10-01
(Revision of ISO 28721-4:2010)
ISO/FDIS 28764
*
Vitreous and porcelain enamels — Production of specimens for testing
enamels on sheet steel, sheet aluminium and cast iron
2015-09-24
(Revision of ISO 28764:2008)
TC 110
Industrial trucks
ISO/FDIS 10896-4
Rough-terrain trucks — Safety requirements and verification — Part 4:
* Additional requirements for variable-reach trucks handling freely
suspended loads
ISO/FDIS 10896-6
*
Rough-terrain trucks — Safety requirements and verification — Part 6:
Tilting operator's cabs
ISO/FDIS 18479-1
*
Rough-terrain trucks — Non-integrated personnel work platforms — Part 1:
Design, safety requirements and verification
2015-10-01
Compressors and pneumatic tools, machines
and equipment
TC 118
ISO/FDIS 18623-1
2015-09-18
*
Air compressors and compressed air systems — Air compressors — Part
1: Safety requirements
2015-10-01
TC 122
ISO/FDIS 8317
Packaging
*
Child-resistant packaging — Requirements and testing procedures for
reclosable packages
2015-09-17
(Revision of ISO 8317:2003, ISO 8317:2003/Cor 1:2005)
TC 147
ISO/FDIS 13167
Water quality
*
TC 153
ISO/FDIS 28921-2
Water quality — Plutonium, americium, curium and neptunium — Test
method using alpha spectrometry
2015-10-01
Valves
*
TC 156
Industrial valves — Isolating valves for low-temperature applications —
Part 2: Type testing
2015-09-21
Corrosion of metals and alloys
ISO/FDIS 18070
*
Corrosion of metals and alloys — Crevice corrosion formers with disc
springs for flat specimens or tubes of stainless steels in corrosive solutions
2015-09-14
ISO/FDIS 18089
*
Corrosion of metals and alloys — Determination of the critical crevice
temperature (CCT) for stainless steels under potentiostatic control
2015-09-14
Thermal performance and energy use in the
built environment
TC 163
ISO/FDIS 6781-3
Performance of buildings — Detection of heat, air and moisture
* irregularities in buildings by infrared methods — Part 3: Qualifications of
equipment operators, data analysts and report writers
TC 172
ISO/FDIS 14132-1
2015-09-10
Optics and photonics
*
Optics and photonics — Vocabulary for telescopic systems — Part 1:
General terms and alphabetical indexes of terms in ISO 14132
2015-09-17
(Revision of ISO 14132-1:2002)
ISO/FDIS 14132-2
*
Optics and photonics — Vocabulary for telescopic systems — Part 2:
Terms for binoculars, monoculars and spotting scopes
2015-09-17
(Revision of ISO 14132-2:2002, ISO 14132-2:2002/Cor 1:2006)
ISO/FDIS 11810
Lasers and laser-related equipment — Test method and classification for
* the laser resistance of surgical drapes and/or patient protective covers —
Primary ignition, penetration, flame spread and secondary ignition
2015-09-24
(Revision of ISO 11810-1:2005, ISO 11810-2:2007)
TC 176
ISO/FDIS 9000
Quality management and quality assurance
* Quality management systems — Fundamentals and vocabulary
2015-09-10
(Revision of ISO 9000:2005)
ISO/FDIS 9001
* Quality management systems — Requirements
2015-09-10
(Revision of ISO 9001:2008, ISO 9001:2008/Cor 1:2009)
TC 188
ISO/FDIS 9094
Small craft
* Small craft — Fire protection
2015-10-01
(Revision of ISO 9094-2:2002, ISO 9094-1:2003)
ISO
21487:2012/FDAmd 2
*
2015-09-24
Biological and clinical evaluation of medical
devices
TC 194
ISO/FDIS 22442-1
Small craft — Permanently installed petrol and diesel fuel tanks —
Amendment 2
*
Medical devices utilizing animal tissues and their derivatives — Part 1:
Application of risk management
2015-10-01
(Revision of ISO 22442-1:2007)
ISO/FDIS 22442-2
*
Medical devices utilizing animal tissues and their derivatives — Part 2:
Controls on sourcing, collection and handling
2015-10-01
(Revision of ISO 22442-2:2007)
TC 198
ISO/FDIS 18362
Sterilization of health care products
*
TC 199
ISO/FDIS 14120
Manufacture of cell-based health care products — Control of microbial risks
2015-09-25
during processing
Safety of machinery
*
Safety of machinery — Guards — General requirements for the design and
construction of fixed and movable guards
2015-09-03
(Revision of ISO 14120:2002)
ISO/FDIS 14123-1
Safety of machinery — Reduction of risks to health resulting from
* hazardous substances emitted by machinery — Part 1: Principles and
specifications for machinery manufacturers
2015-09-10
(Revision of ISO 14123-1:1998)
ISO/FDIS 14123-2
Safety of machinery — Reduction of risks to health resulting from
* hazardous substances emitted by machinery — Part 2: Methodology
leading to verification procedures
2015-09-10
(Revision of ISO 14123-2:1998)
ISO/FDIS 19353
* Safety of machinery — Fire prevention and fire protection
2015-10-01
(Revision of ISO 19353:2005)
TC 201
ISO/FDIS 19830
Surface chemical analysis
*
TC 204
ISO/FDIS 12813
Surface chemical analysis — Electron spectroscopies — Minimum
reporting requirements for peak fitting in X-ray photoelectron spectroscopy
2015-09-21
Intelligent transport systems
*
Electronic fee collection — Compliance check communication for
autonomous systems
2015-09-24
(Revision of ISO/TS 12813:2009)
ISO/FDIS 13141
*
Electronic fee collection — Localisation augmentation communication for
autonomous systems
2015-09-24
(Revision of ISO/TS 13141:2010, ISO/TS 13141:2010/Cor 1:2013)
ISO/FDIS 15784-2
* Intelligent transport systems (ITS) — Data exchange involving roadside
2015-09-07
modules communication — Part 2: Centre to field device communications
using SNMP
TC 207
ISO/FDIS 14001
Environmental management
*
Environmental management systems — Requirements with guidance for
use
2015-09-03
(Revision of ISO 14001:2004, ISO 14001:2004/Cor 1:2009)
Dimensional and geometrical product
specifications and verification
TC 213
ISO/FDIS 3040
*
Geometrical product specifications (GPS) — Dimensioning and tolerancing
— Cones
2015-10-01
(Revision of ISO 3040:2009, ISO 3040:2009/DAmd 1.2)
ISO/FDIS 25178-1
*
TC 220
ISO/FDIS 21009-2
Geometrical product specifications (GPS) — Surface texture: Areal — Part
1: Indication of surface texture
2015-09-03
Cryogenic vessels
*
Cryogenic vessels — Static vacuum insulated vessels
— Part 2: Operational requirements
2015-09-24
(Revision of ISO 21009-2:2006)
Materials for the production of primary
aluminium
TC 226
ISO/FDIS 23201
Aluminium oxide primarily used for production of aluminium —
* Determination of trace elements — Wavelength dispersive X-ray
fluorescence spectrometric method
TC 238
2015-09-09
Solid biofuels
ISO/FDIS 17828
* Solid biofuels — Determination of bulk density
ISO/FDIS 17831-1
*
TC 249
Solid biofuels — Determination of mechanical durability of pellets and
briquettes — Part 1: Pellets
2015-09-17
2015-09-17
Traditional chinese medicine
ISO/FDIS 18665
* Traditional Chinese medicine — Herbal decoction apparatus
ISO/FDIS 18666
*
Traditional Chinese medicine — General requirements of moxibustion
devices
2015-10-01
2015-10-01
JTC 1
Information technology
ISO/IEC/IEEE 88021X:2013/FDAmd 1
Information technology — Telecommunications and information exchange
between systems — Local and metropolitan area networks — Part 1X:
Port-based network access control — Amendment 1: MAC security key
agreement protocol (MKA) extensions
2015-12-23
Systems and software engineering — Information technology project
performance benchmarking framework — Part 3: Guidance for reporting
2015-09-30
ISO/IEC FDIS 29155-3
ISO/IEC FDIS 27017
*
Information technology — Security techniques — Code of practice for
information security controls based on ISO/IEC 27002 for cloud services
ISO/IEC FDIS 14496-11 *
Information technology — Coding of audio-visual objects — Part 11: Scene
description and application engine
2015-09-22
(Revision of ISO/IEC 14496-11:2005)
ISO/IEC FDIS 19762
*
Information technology — Automatic identification and data capture (AIDC)
techniques — Harmonized vocabulary
2015-09-23
(Revision of ISO/IEC 19762-1:2008, ISO/IEC 19762-2:2008, ISO/IEC
19762-3:2008, ISO/IEC 19762-4:2008, ISO/IEC 19762-5:2008)
Standards published
New International Standards published between 01 July and 31 July 2015
* Available in English only
** French version of standard previously published in English only
Price
group
TC 6
ISO 302:2015
Paper, board and pulps
* Pulps — Determination of Kappa number
TC 20
B
Aircraft and space vehicles
ISO 16130:2015
*
Aerospace series — Dynamic testing of the locking behaviour of bolted
connections under transverse loading conditions (vibration test)
B
ISO 19632:2015
*
Aerospace series — Fitting end, 24° internal cone, external thread, flareless type
extra fine thread pitch inch series — Design standard
B
ISO 22645:2005/Amd
Space data and information transfer systems — TM (telemetry) space data link
*
1:2015
protocol — Amendment 1
XZ
ISO 22646:2005/Amd
Space data and information transfer systems — Space packet protocol —
*
1:2015
Amendment 1
XZ
ISO 22664:2013/Amd
Space data and information transfer systems — TC (telecommand) space data
*
1:2015
link protocol — Amendment 1
XZ
ISO 16164:2015
* Space systems — Disposal of satellites operating in or crossing Low Earth Orbit
TC 22
B
Road vehicles
ISO 15031-5:2015
*
Road vehicles — Communication between vehicle and external equipment for
emissions-related diagnostics — Part 5: Emissions-related diagnostic services
H
ISO 15031-6:2015
*
Road vehicles — Communication between vehicle and external equipment for
emissions-related diagnostics — Part 6: Diagnostic trouble code definitions
C
ISO 10924-4:2015
*
Road vehicles — Circuit breakers — Part 4: Medium circuit breakers with tabs
(Blade type), Form CB15
C
ISO 6519:2015
* Diesel engines — Fuel injection pumps — Tapers for shaft ends and hubs
A
ISO 6487:2015
Road vehicles — Measurement techniques in impact tests — Instrumentation
C
ISO/TR 123491:2015
* Road vehicles — Dummies for restraint system testing — Part 1: Adult dummies
A
TC 23
Tractors and machinery for agriculture and forestry
ISO 17962:2015
Agricultural machinery — Equipment for sowing — Minimization of the
environmental effects of fan exhaust from pneumatic systems
B
ISO 3600:2015
Tractors, machinery for agriculture and forestry, powered lawn and garden
equipment — Operator's manuals — Content and format
B
Radio frequency identification of animals — Standardization of injection sites for
different animal species — Part 1: Companion animals (cats and dogs)
B
ISO 15639-1:2015
*
TC 28
Petroleum products and related products of
synthetic or biological origin
ISO 6743-4:2015
Lubricants, industrial oils and related products (class L) — Classification — Part 4:
Family H (Hydraulic systems)
TC 38
Textiles
ISO 18596:2015
* Test method for staple length of dehaired cashmere — Hand-arranging method
TC 39
ISO 230-7:2015
A
B
Machine tools
* Test code for machine tools — Part 7: Geometric accuracy of axes of rotation
TC 44
G
Welding and allied processes
ISO 17533:2015
* Welding for aerospace applications — Welding information in design documents
A
ISO 17634:2015
Welding consumables — Tubular cored electrodes for gas shielded metal arc
welding of creep-resisting steels — Classification
D
TC 45
Rubber and rubber products
ISO 1125:2015
Rubber compounding ingredients — Carbon black — Determination of ash
A
ISO 1658:2015
Natural rubber (NR) — Evaluation procedure
C
Styrene-butadiene rubber (SBR) — Determination of the microstructure of
solution-polymerized SBR — Part 1: 1H-NMR and IR with cast-film method
C
ISO 21561-1:2015
*
TC 63
ISO 12822:2015
Glass containers
* Glass packaging — 26 H 126 crown finish — Dimensions
A
Materials, equipment and offshore structures for
petroleum, petrochemical and natural gas industries
TC 67
ISO 16961:2015
*
Petroleum, petrochemical and natural gas industries — Internal coating and lining
of steel storage tanks
F
ISO 13702:2015
*
Petroleum and natural gas industries — Control and mitigation of fires and
explosions on offshore production installations — Requirements and guidelines
G
ISO 24817:2015
*
Petroleum, petrochemical and natural gas industries — Composite repairs for
pipework — Qualification and design, installation, testing and inspection
H
TC 68
ISO 10962:2015
Financial services
*
Securities and related financial instruments — Classification of financial
instruments (CFI code)
G
TC 69
Applications of statistical methods
ISO 13528:2015
Statistical methods for use in proficiency testing by interlaboratory comparison
TC 70
Internal combustion engines
ISO 8178-7:2015
Reciprocating internal combustion engines — Exhaust emission measurement —
Part 7: Engine family determination
TC 76
Transfusion, infusion and injection, and blood
processing equipment for medical and
pharmaceutical use
ISO 3826-4:2015
Plastics collapsible containers for human blood and blood components — Part 4:
Aphaeresis blood bag systems with integrated features
TC 83
Sports and other recreational facilities and
equipment
ISO 8783:2015
Alpine skis — Guidelines for conducting slope performance tests
A
ISO 9523:2015
Touring ski-boots for adults — Interface with touring ski-bindings — Requirements
and test methods
D
TC 85
Nuclear energy, nuclear technologies, and
radiological protection
H
A
E
ISO/ASTM
51026:2015
* Practice for using the Fricke dosimetry system
B
ISO/ASTM
52303:2015
* Guide for absorbed-dose mapping in radiation processing facilities
B
ISO/TS 180901:2015
*
Radiological protection — Characteristics of reference pulsed radiation — Part 1:
Photon radiation
C
ISO 21613:2015
(U, Pu)O2 Powders and sintered pellets — Determination of chlorine and fluorine
B
TC 87
Cork
ISO 2385:2015
Packed cork — Virgin cork, raw reproduction cork, ramassage, gleanings, burnt
* cork, boiled reproduction cork and raw corkwaste — Sampling to determine
moisture content
A
ISO 2386:2015
Packed cork — Virgin cork, raw reproduction cork, ramassage, gleanings, burnt
* cork, boiled reproduction cork and raw corkwaste — Determination of moisture
content
A
TC 92
ISO 16730-1:2015
Fire safety
*
Fire safety engineering — Procedures and requirements for verification and
validation of calculation methods — Part 1: General
F
TC 94
Personal safety -- Protective clothing and equipment
ISO 11611:2015
Protective clothing for use in welding and allied processes
C
ISO 11612:2015
Protective clothing — Clothing to protect against heat and flame — Minimum
performance requirements
D
ISO 14116:2015
Protective clothing — Protection against flame — Limited flame spread materials,
C
material assemblies and clothing
TC 96
Cranes
Cranes — Limiting and indicating devices — Part 2: Mobile cranes — Amendment
1
ISO 102452:2014/Amd 1:2015
*
ISO 17096:2015
* Cranes — Safety — Load lifting attachments
TC 102
XZ
F
Iron ore and direct reduced iron
ISO 4689-2:2015
* Iron ores — Determination of sulfur content — Part 2: Combustion/titration method
ISO 4689-3:2015
*
Iron ores — Determination of sulfur content — Part 3: Combustion/infrared
method
C
ISO 10204:2015
*
Iron ores — Determination of magnesium — Flame atomic absorption
spectrometric method
C
ISO 11536:2015
* Iron ores — Determination of loss on ignition — Gravimetric method
ISO 15634:2015
*
Iron ores — Determination of chromium content — Flame atomic absorption
spectrometric method
TC 106
Dentistry
ISO 4823:2015
Dentistry — Elastomeric impression materials
TC 108
Mechanical vibration, shock and condition
monitoring
ISO 53492:2001/Amd 1:2015
Mechanical vibration — Measurement and evaluation of human exposure to handtransmitted vibration — Part 2: Practical guidance for measurement at the
workplace — Amendment 1
TC 110
Industrial trucks
ISO 11525-5:2015
*
Rough-terrain trucks — User requirements — Part 5: Interface between roughterrain truck and integrated personnel work platform
C
B
C
F
XZ
A
TC 121
Anaesthetic and respiratory equipment
ISO 17510:2015
Medical devices — Sleep apnoea breathing therapy — Masks and application
accessories
E
ISO 23747:2015
Anaesthetic and respiratory equipment — Peak expiratory flow meters for the
assessment of pulmonary function in spontaneously breathing humans
D
TC 131
Fluid power systems
ISO 10771-1:2015
TC 134
ISO 8157:2015
TC 138
ISO 15874-5:2013
*
Hydraulic fluid power — Fatigue pressure testing of metal pressure-containing
envelopes — Part 1: Test method
C
Fertilizers and soil conditioners
* Fertilizers and soil conditioners — Vocabulary
A
Plastics pipes, fittings and valves for the transport
of fluids
* Plastics piping systems for hot and cold water installations — Polypropylene (PP)
B
— Part 5: Fitness for purpose of the system
ISO 10931:2005/Amd
1:2015
Plastics piping systems for industrial applications — Poly(vinylidene fluoride)
(PVDF) — Specifications for components and the system — Amendment 1
TC 156
Corrosion of metals and alloys
ISO 17918:2015
Corrosion of metals and alloys — Evaluation of selective corrosion of Cu alloys
and grey cast iron for power plant components by visual inspection and hardness
measurement
TC 164
Mechanical testing of metals
ISO 14577-1:2015
Metallic materials — Instrumented indentation test for hardness and materials
parameters — Part 1: Test method
F
ISO 14577-2:2015
Metallic materials — Instrumented indentation test for hardness and materials
parameters — Part 2: Verification and calibration of testing machines
D
ISO 14577-3:2015
Metallic materials — Instrumented indentation test for hardness and materials
parameters — Part 3: Calibration of reference blocks
B
TC 171
Document management applications
ISO/TR 18159:2015
*
Document management — Environmental and work place safety regulations
affecting microfilm processors
XZ
D
F
TC 172
Optics and photonics
ISO 10110-5:2015
Optics and photonics — Preparation of drawings for optical elements and systems
— Part 5: Surface form tolerances
D
ISO 10110-6:2015
Optics and photonics — Preparation of drawings for optical elements and systems
— Part 6: Centring tolerances
D
ISO 10110-19:2015
Optics and photonics — Preparation of drawings for optical elements and systems
— Part 19: General description of surfaces and components
B
ISO 14999-4:2015
Optics and photonics — Interferometric measurement of optical elements and
optical systems — Part 4: Interpretation and evaluation of tolerances specified in
ISO 10110
E
ISO 8624:2011/Amd
1:2015
Ophthalmic optics — Spectacle frames — Measuring system and terminology —
Amendment 1
XZ
TC 173
Assistive products for persons with disability
ISO/TR 168409:2015
*
Wheelchair seating — Part 9: Clinical interface pressure mapping guidelines for
seating
TC 182
Geotechnics
ISO 17628:2015
Geotechnical investigation and testing — Geothermal testing — Determination of
thermal conductivity of soil and rock using a borehole heat exchanger
TC 184
Automation systems and integration
ISO 18435-3:2015
TC 195
Industrial automation systems and integration — Diagnostics, capability
* assessment and maintenance applications integration — Part 3: Applications
integration description method
Building construction machinery and equipment
C
E
F
ISO 17740-1:2015
*
TC 201
Building construction machinery and equipment — Concrete placing systems for
stationary equipment — Part 1: Terminology and commercial specifications
Surface chemical analysis
Surface chemical analysis — Use of Total Reflection X-ray Fluorescence
spectroscopy in biological and environmental analysis
ISO/TS 18507:2015
*
ISO 17109:2015
Surface chemical analysis — Depth profiling — Method for sputter rate
determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy
*
and secondary-ion mass spectrometry sputter depth profiling using single and
multi-layer thin films
TC 204
ISO 11067:2015
E
C
Intelligent transport systems
*
ISO 14906:2011/Amd
1:2015
ISO 21214:2015
B
*
Intelligent transport systems — Curve speed warning systems (CSWS) —
Performance requirements and test procedures
E
Electronic fee collection — Application interface definition for dedicated shortrange communication — Amendment 1
D
Intelligent transport systems — Communications access for land mobiles (CALM)
— Infra-red systems
H
TC 212
Clinical laboratory testing and in vitro diagnostic
test systems
ISO/TS 17518:2015
Medical laboratories — Reagents for staining biological material — Guidance for
users
TC 215
Health informatics
C
ISO/HL7 10781:2015
*
Health Informatics — HL7 Electronic Health Records-System Functional Model,
Release 2 (EHR FM)
G
ISO/TS 220773:2015
*
Health informatics — Medical waveform format — Part 3: Long term
electrocardiography
E
TC 218
ISO 738:2015
Timber
* Coniferous sawn timber — Sizes — Permissible deviations and shrinkage
TC 227
ISO 18137:2015
A
Springs
* Leaf springs — Technical specifications
TC 234
C
Fisheries and aquaculture
ISO 16488:2015
* Marine finfish farms — Open net cage — Design and operation
D
ISO 16541:2015
* Methods for sea lice surveillance on marine finfish farms
B
TC 249
ISO 18664:2015
Traditional chinese medicine
*
TC 258
ISO 21504:2015
Traditional Chinese Medicine — Determination of heavy metals in herbal
medicines used in Traditional Chinese Medicine
B
Project, programme and portfolio management
*
Project, programme and portfolio management — Guidance on portfolio
management
C
JTC 1
Information technology
Standard for Management Information Base (MIB) — Definitions for Ethernet —
Part 3-1:
ISO/IEC/IEEE 88023-1:2015
*
ISO/IEC
18092:2013/Cor
1:2015
Information technology — Telecommunications and information exchange
* between systems — Near Field Communication — Interface and Protocol (NFCIP1) — Technical Corrigendum 1
ISO/IEC 29157:2015
Information technology — Telecommunications and information exchange
* between systems — PHY/MAC specifications for short-range wireless low-rate
applications in the ISM band
G
ISO/IEC 16350:2015
*
Information technology — Systems and software engineering — Application
management
H
ISO/IEC 197705:2015
*
Information technology — IT asset management — Overview and vocabulary —
Part 5:
D
ISO/IEC 33063:2015
*
Information technology — Process assessment — Process assessment model for
software testing
G
ISO/IEC 7812-1:2015 * Identification cards — Identification of issuers — Part 1: Numbering system
ISO/IEC 7812-2:2015 *
Identification cards — Identification of issuers — Part 2: Application and
registration procedures
H
free
A
E
ISO/IEC 156933:2009/Amd 2:2015
Identification cards — Contactless integrated circuit cards — Vicinity cards — Part
* 3: Anticollision and transmission protocol — Amendment 2: Clarification of use of
Data Elements
XZ
ISO/IEC 180331:2015
*
Information technology — Security techniques — Encryption algorithms — Part 1:
General
C
ISO/IEC TR
27023:2015
*
Information technology — Security techniques — Mapping the revised editions of
ISO/IEC 27001 and ISO/IEC 27002
D
ISO/IEC 270342:2015
*
Information technology — Security techniques — Application security — Part 2:
Organization normative framework
G
ISO/IEC 29102:2015
Information technology — Office equipment — Method for the determination of ink
* cartridge photo yield for colour printing with inkjet printers and multi-function
devices that contain inkjet printer components
D
ISO/IEC 138181:2015/Amd 1:2015
Information technology — Generic coding of moving pictures and associated
* audio information — Part 1: Systems — Amendment 1: Delivery of timeline for
external data
free
ISO/IEC 144963:2009/Cor 6:2015
*
Information technology — Coding of audio-visual objects — Part 3: Audio —
Technical Corrigendum 6
free
ISO/IEC 154442:2004/Amd 3:2015
Information technology — JPEG 2000 image coding system: Extensions — Part 2:
* — Amendment 3: Box-based file format for JPEG XR, extended ROI boxes, XML
boxing, compressed channel definition boxes, and representation of floating point
F
ISO/IEC 154442:2004/Amd 4:2015
*
Information technology — JPEG 2000 image coding system: Extensions — Part 2:
— Amendment 4: Block coder extension
XZ
ISO/IEC 230018:2013/Amd 1:2015
*
Information technology — MPEG systems technologies — Part 8: Codingindependent code points — Amendment 1: New audio code points
XZ
ISO/IEC 2300111:2015
*
Information technology — MPEG systems technologies — Part 11: Energyefficient media consumption (green metadata)
ISO/IEC 23009-
* Information technology — Dynamic adaptive streaming over HTTP (DASH) —
F
XZ
Part 1: Media presentation description and segment formats — Amendment 2:
Spatial relationship description, generalized URL parameters and other
extensions
1:2014/Amd 2:2015
ISO/IEC TS
20013:2015
*
Information technology for learning, education and training — A reference
framework of e-Portfolio information
ISO/IEC 197947:2014/Amd 1:2015
*
Information technology — Biometric data interchange formats — Part 7:
Signature/sign time series data — Amendment 1: XML encoding
XZ
ISO/IEC 197949:2011/Amd 2:2015
*
Information technology — Biometric data interchange formats — Part 9: Vascular
image data — Amendment 2: XML Encoding and clarification of defects
XZ
ISO/IEC 197952:2007/Amd 1:2015
Information technology — Biometric performance testing and reporting — Part 2:
* Testing methodologies for technology and scenario evaluation — Amendment 1:
Testing of multimodal biometric implementations
XZ
ISO/IEC TR
29189:2015
*
ISO/IEC 297946:2015
* Information technology — Biometric sample quality — Part 6: Iris image data
Information technology — Biometrics — Evaluation of examiner assisted biometric
applications
Standards confirmed
The following International Standards are confimred for a five year period:
IIW
International Institute of Welding
ISO 14329:2003
TC 1
Screw threads
ISO 263:1973
(reconfirmed)
TC 2
Fasteners
ISO 3506-1:2009
ISO 3506-2:2009
TC 6
Paper, board and pulps
ISO 3783:2006
(reconfirmed)
ISO 5635:1978
(reconfirmed)
ISO 5637:1989
(reconfirmed)
ISO 5638:1978
(reconfirmed)
ISO 8226-1:1994
(reconfirmed)
ISO 1262512:2010
ISO 14968:1999
(reconfirmed)
ISO 15359:1999
(reconfirmed)
ISO 15755:1999
(reconfirmed)
TC 8
Ships and marine technology
F
D
E
ISO 8385:1999
(reconfirmed)
TC 10
Technical product documentation
ISO 9175-1:1988
(reconfirmed)
ISO 9177-2:1989
(reconfirmed)
ISO 9177-3:1994
(reconfirmed)
ISO 9180:1988
(reconfirmed)
ISO 7518:1983
(reconfirmed)
ISO 3511-1:1977
(reconfirmed)
ISO 3511-2:1984
(reconfirmed)
ISO 3511-3:1984
(reconfirmed)
ISO 3511-4:1985
(reconfirmed)
TC 17
Steel
ISO 1005-1:1994
(reconfirmed)
ISO 1005-3:1982
(reconfirmed)
ISO 1005-6:1994
(reconfirmed)
ISO 1005-7:1982
(reconfirmed)
ISO 11484:2009
TC 20
Aircraft and space vehicles
ISO 8913:2006
(reconfirmed)
ISO 17775:2006
(reconfirmed)
TC 22
Road vehicles
ISO 8853:1989
(reconfirmed)
ISO 13218:1998
(reconfirmed)
ISO 337:1981
ISO 3842:2006
(reconfirmed)
ISO 4009:2000
(reconfirmed)
ISO 4086:2001
(reconfirmed)
ISO 7646:1986
(reconfirmed)
ISO 7647:1986
(reconfirmed)
ISO 7648:1987
(reconfirmed)
ISO 7649:1991
(reconfirmed)
ISO 7650:1987
(reconfirmed)
ISO 7651:1991
(reconfirmed)
ISO 7707:1986
(reconfirmed)
ISO 7803:1987
(reconfirmed)
ISO 7804:1985
(reconfirmed)
ISO 8035:1991
(reconfirmed)
ISO 8123:1991
(reconfirmed)
ISO 8667:1992
(reconfirmed)
ISO 8755:2001
(reconfirmed)
ISO 9457-1:1991
(reconfirmed)
ISO 9457-2:1994
(reconfirmed)
ISO 11055:1996
(reconfirmed)
ISO 11406:2001
(reconfirmed)
ISO 11407:2004
(reconfirmed)
ISO 12357-1:1999
(reconfirmed)
ISO 12667:1993
(reconfirmed)
ISO/TS
20825:2003
(reconfirmed)
ISO/TS 213084:2007
(reconfirmed)
TC 23
Tractors and machinery for agriculture and forestry
ISO 4102:1984
(reconfirmed)
ISO 6686:1995
(reconfirmed)
ISO 8169:1984
(reconfirmed)
ISO 9357:1990
(reconfirmed)
ISO 9898:2000
(reconfirmed)
ISO 13441-1:1997
(reconfirmed)
ISO 13441-2:1997
(reconfirmed)
ISO 19732:2007
(reconfirmed)
TC 29
Small tools
ISO 6753-1:2005
(reconfirmed)
ISO 16915:2003
(reconfirmed)
TC 34
Food products
ISO 1871:2009
ISO 22006:2009
ISO/TS
11869:2012
ISO 12082:2006
(reconfirmed)
ISO 21543:2006
(reconfirmed)
ISO 927:2009
ISO 959-1:1998
(reconfirmed)
ISO 959-2:1998
(reconfirmed)
ISO 1108:1992
(reconfirmed)
ISO 2256:1984
(reconfirmed)
ISO 2825:1981
(reconfirmed)
ISO 5562:1983
(reconfirmed)
ISO 5563:1984
(reconfirmed)
ISO 6574:1986
(reconfirmed)
ISO 6754:1996
(reconfirmed)
ISO 7386:1984
(reconfirmed)
ISO 7541:1989
(reconfirmed)
ISO 7542:1984
(reconfirmed)
ISO 7543-1:1994
(reconfirmed)
ISO 7543-2:1993
(reconfirmed)
ISO 7926:1991
(reconfirmed)
ISO 7928-1:1991
(reconfirmed)
ISO 7928-2:1991
(reconfirmed)
ISO 11027:1993
(reconfirmed)
TC 39
Machine tools
ISO 3408-1:2006
(reconfirmed)
ISO 3408-4:2006
(reconfirmed)
ISO 3408-5:2006
(reconfirmed)
TC 43
Acoustics
ISO 389-4:1994
(reconfirmed)
ISO 3741:2010
ISO 3743-1:2010
ISO 3747:2010
ISO 9613-1:1993
(reconfirmed)
ISO 11201:2010
ISO 11204:2010
ISO 11546-1:1995
(reconfirmed)
ISO 11546-2:1995
(reconfirmed)
ISO 15667:2000
(reconfirmed)
ISO 17201-5:2010
TC 61
Plastics
ISO 60:1977
(reconfirmed)
ISO 308:1994
(reconfirmed)
ISO 2114:2000
(reconfirmed)
ISO 2577:2007
(reconfirmed)
ISO 3672-1:2000
(reconfirmed)
ISO 3672-2:2000
(reconfirmed)
ISO 4614:1977
(reconfirmed)
ISO 8989:1995
(reconfirmed)
ISO 9771:1995
(reconfirmed)
ISO 18280:2010
ISO 21318:2007
(reconfirmed)
TC 67
Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries
ISO 13625:2002
(reconfirmed)
TC 82
Mining
ISO 610:1990
(reconfirmed)
ISO 1082:1990
(reconfirmed)
ISO 5612:1990
(reconfirmed)
ISO 5613:1984
(reconfirmed)
TC 86
Refrigeration and air-conditioning
ISO 13256-1:1998
(reconfirmed)
ISO 13256-2:1998
(reconfirmed)
TC 89
Wood-based panels
ISO 3340:1976
(reconfirmed)
TC 100
Chains and chain sprockets for power transmission and
conveyors
ISO 1275:2006
(reconfirmed)
TC 105
Steel wire ropes
ISO 17558:2006
(reconfirmed)
TC 108
Mechanical vibration, shock and condition monitoring
ISO 6897:1984
(reconfirmed)
TC 117
Fans
ISO 13347-1:2004
(reconfirmed)
ISO 13347-2:2004
(reconfirmed)
TC 118
Compressors and pneumatic tools, machines and equipment
ISO 1217:2009
TC 130
Graphic technology
ISO 12643-1:2009
ISO 12643-2:2010
ISO 12643-3:2010
ISO 12643-4:2010
TC 147
Water quality
ISO/TS
28581:2012
ISO 29441:2010
ISO 19458:2006
(reconfirmed)
ISO 9439:1999
(reconfirmed)
ISO 9888:1999
(reconfirmed)
ISO 10707:1994
(reconfirmed)
ISO 12890:1999
(reconfirmed)
ISO 14593:1999
(reconfirmed)
ISO 14669:1999
(reconfirmed)
ISO 15522:1999
(reconfirmed)
ISO 21427-1:2006
(reconfirmed)
ISO 5667-22:2010
TC 150
Implants for surgery
ISO 25539-3:2011
TC 153
Valves
ISO 10497:2010
TC 164
Mechanical testing of metals
ISO 26203-1:2010
TC 168
Prosthetics and orthotics
ISO 8548-5:2003
(reconfirmed)
ISO 8551:2003
(reconfirmed)
TC 172
Optics and photonics
ISO 15227:2000
(reconfirmed)
TC 176
Quality management and quality assurance
ISO 10001:2007
ISO 10003:2007
ISO 10019:2005
(reconfirmed)
TC 184
Automation systems and integration
ISO 9283:1998
(reconfirmed)
ISO 9409-1:2004
(reconfirmed)
ISO 9946:1999
(reconfirmed)
TC 188
Small craft
ISO 8099:2000
(reconfirmed)
ISO 10240:2004
(reconfirmed)
ISO 11192:2005
(reconfirmed)
ISO 12216:2002
(reconfirmed)
ISO 14945:2004
(reconfirmed)
ISO 15084:2003
(reconfirmed)
ISO 15085:2003
ISO 8847:2004
(reconfirmed)
ISO 8848:1990
(reconfirmed)
ISO 9775:1990
(reconfirmed)
ISO 13590:2003
(reconfirmed)
ISO 13929:2001
(reconfirmed)
ISO 15652:2003
(reconfirmed)
TC 190
Soil quality
ISO 11277:2009
ISO 15952:2006
(reconfirmed)
ISO 17126:2005
(reconfirmed)
ISO 23611-2:2006
(reconfirmed)
ISO 23753-1:2005
(reconfirmed)
ISO 23753-2:2005
(reconfirmed)
ISO/TS 298432:2011
TC 193
Natural gas
ISO 12213-1:2006
(reconfirmed)
ISO 12213-2:2006
(reconfirmed)
TC 207
Environmental management
ISO 14025:2006
(reconfirmed)
TC 213
Dimensional and geometrical product specifications and
verification
ISO 2768-2:1989
(reconfirmed)
ISO 10579:2010
ISO 25178-6:2010
TC 217
Cosmetics
ISO 10130:2009
JTC 1
Information technology
ISO/IEC 98347:2008
ISO/IEC 98349:2008
ISO/IEC
11571:1998
(reconfirmed)
ISO/IEC
13246:1997
(reconfirmed)
ISO/IEC
14474:1998
(reconfirmed)
ISO/IEC
15053:2003
(reconfirmed)
ISO/IEC
15054:2003
(reconfirmed)
ISO/IEC
15507:1997
(reconfirmed)
ISO/IEC
19460:2003
(reconfirmed)
ISO/IEC
21408:2003
(reconfirmed)
ISO/IEC
21990:2002
(reconfirmed)
ISO/IEC TR
22767:2005
ISO/IEC
23290:2004
(reconfirmed)
ISO/IEC 248243:2008
ISO/IEC TR
26905:2006
ISO/IEC 144963:2009
ISO/IEC
14662:2010
ISO/IEC
26300:2006
Standards withdrawn
Period from 01 July to 31 July 2015
TC 67
Materials, equipment and offshore structures for
petroleum, petrochemical and natural gas industries
ISO/TS 24817:2006
(replaced by ISO 24817:2015)
TC 92
Fire safety
ISO 16730:2008
(replaced by ISO 16730-1:2015)
TC 121
Anaesthetic and respiratory equipment
ISO 17510-2:2007
(replaced by ISO 17510:2015)
TMBG
Technical Management Board - groups
ISO 6153:1989
(replaced by )
ISO 6154:1989
(replaced by )
ISO 6230:1989
(replaced by )
ISO 6233:1983
(replaced by )
JTC 1
Information technology
ISO/IEC 154441:2004/Amd 8:2015
(replaced by )
ISO/IEC 154445:2003/Amd 2:2015
(replaced by )
ISO/IEC 26300:2006
(replaced by ISO/IEC 26300-1:2015, ISO/IEC 26300-2:2015, ISO/IEC 26300-3:2015)
ISO/IEC 26300:2006/Amd
(replaced by ISO/IEC 26300-1:2015, ISO/IEC 26300-2:2015, ISO/IEC 26300-3:2015)
1:2012
Meeting calendar
(update at 01 July 2015)
Meetings called for the month of June are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
August 2015
2427
Stockholm
(Sweden)
TC 8/SC 3
Ships and marine technology/Piping and machinery
2428
London (United
Kingdom)
JTC 1/SC 24
Information technology/Computer graphics, image processing and
environmental data representation
2428
Toronto (Canada)
TC 258
Project, programme and portfolio management
2526
Beijing (China)
TC 36
Cinematography
2526
London (United
Kingdom)
TC 105
Steel wire ropes
26
Geneva
(Switzerland)
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
2628
Jeju (Korea,
Republic of)
TC 206
Fine ceramics
28
Uppsala (Sweden)
TC 46/SC 10
Information and documentation/Requirements for document
storage and conditions for preservation
August-September 2015
314
Hokaido (Japan)
JTC 1/SC 35
Information technology/User interfaces
September 2015
4
Washington, D.C
(USA)
TC 84
Devices for administration of medicinal products and catheters
412
New Delhi (India)
TC 207
Environmental management
412
New Delhi (India)
TC 207/SC 4
Environmental management/Environmental performance
evaluation
412
New Delhi (India)
TC 207/SC 7
Environmental management/Greenhouse gas management and
related activities
7
Teddington
(United Kingdom)
TC 164/SC 2
Mechanical testing of metals/Ductility testing
711
Sydney (Australia)
TC 96/SC 9
Cranes/Bridge and gantry cranes
711
Tokyo (Japan)
TC 133
Clothing sizing systems - size designation, size measurement
methods and digital fittings
711
Teddington
(United Kingdom)
TC 164
Mechanical testing of metals
714
Sydney (Australia)
TC 96
Cranes
8
Sydney (Australia)
TC 96/SC 3
Cranes/Selection of wire ropes
810
Teddington
(United Kingdom)
TC 164/SC 5
Mechanical testing of metals/Fatigue testing
9
Teddington
(United Kingdom)
TC 164/SC 1
Mechanical testing of metals/Uniaxial testing
9
Teddington
(United Kingdom)
TC 164/SC 4
Mechanical testing of metals/Toughness testing -- Fracture (F),
Pendulum (P), Tear (T)
10
Sydney (Australia)
TC 96/SC 2
Cranes/Terminology
10
Teddington
(United Kingdom)
TC 164/SC 3
Mechanical testing of metals/Hardness testing
10
New Delhi (India)
TC 207/SC 1
Environmental management/Environmental management systems
1011
Oslo (Norway)
TC 265
Carbon dioxide capture, transportation, and geological storage
11
Milan (Italy)
JTC 1/SC 25
Information technology/Interconnection of information technology
equipment
11
Sydney (Australia)
TC 96/SC 7
Cranes/Tower cranes
11
Courbevoie, Paris
(France)
TC 153
Valves
11
New Delhi (India)
TC 207/SC 2
Environmental management/Environmental auditing and related
environmental investigations
11
New Delhi (India)
TC 207/SC 5
Environmental management/Life cycle assessment
13
Seoul (Korea,
Republic of)
President's
committee
President's committee
13
Seattle (USA)
TC 201/SC 6
Surface chemical analysis/Secondary ion mass spectrometry
14
Seoul (Korea,
Republic of)
COUNCIL
Council
14
Berlin (Germany)
TC 150/SC 1
Implants for surgery/Materials
1415
Washington, D.C
(USA)
JTC 1/SC 22
Information technology/Programming languages, their
environments and system software interfaces
1417
Lahaina, Hawaii
(USA)
TC 127
Earth-moving machinery
1417
Washington, D.C
(USA)
TC 157
Non-systemic contraceptives and STI barrier prophylactics
1417
Boulder (USA)
TC 172/SC 5
Optics and photonics/Microscopes and endoscopes
1418
Berlin (Germany)
TC 150
Implants for surgery
1418
Victoria (Canada)
TC 205
Building environment design
1425
Berlin (Germany)
TC 213
Dimensional and geometrical product specifications and
verification
15
Seoul (Korea,
DEVCO
Committee on developing country matters
Republic of)
15
Vienna (Austria)
TC 33
Refractories
15
Berlin (Germany)
TC 150/SC 5
Implants for surgery/Osteosynthesis and spinal devices
15
Berlin (Germany)
TC 150/SC 7
Implants for surgery/Tissue-engineered medical products
15
Seoul (Korea,
Republic of)
TMB
Technical Management Board
1517
Pittsburgh (USA)
TC 94/SC 15
Personal safety -- Protective clothing and equipment/Respiratory
protective devices
1618
Seoul (Korea,
Republic of)
GA
General Assembly
17
Seoul (Korea,
Republic of)
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
17
Milan (Italy)
TC 43/SC 2
Acoustics/Building acoustics
17
Kanazawa
(Japan)
TC 142
Cleaning equipment for air and other gases
17
Berlin (Germany)
TC 150/SC 2
Implants for surgery/Cardiovascular implants and extracorporeal
systems
17
Berlin (Germany)
TC 150/SC 4
Implants for surgery/Bone and joint replacements
1718
Hangzhou (China)
TC 8/SC 13
Ships and marine technology/Marine technology
1718
Delft
(Netherlands)
TC 67
Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries
1718
Delft
(Netherlands)
TC 67
Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries
1718
Victoria (Canada)
TC 163
Thermal performance and energy use in the built environment
18
Milan (Italy)
TC 43
Acoustics
18
Milan (Italy)
TC 43/SC 1
Acoustics/Noise
18
Berlin (Germany)
TC 146/SC 2
Air quality/Workplace atmospheres
1819
Hawaii (USA)
TC 23/SC 14
Tractors and machinery for agriculture and forestry/Operator
controls, operator symbols and other displays, operator manuals
20
Williamsburg
(USA)
TC 27/SC 1
Solid mineral fuels/Coal preparation: Terminology and
performance
2026
Williamsburg
(USA)
TC 27
Solid mineral fuels
21
Williamsburg
(USA)
TC 27/SC 5
Solid mineral fuels/Methods of analysis
21
Fort Lauderdale
(USA)
TC 104/SC 4
Freight containers/Identification and communication
2123
London (United
Kingdom)
TC 232
Learning services outside formal education
21-
Cleveland (USA)
TC 82
Mining
24
2125
Poznan (Poland)
TC 23/SC 6
Tractors and machinery for agriculture and forestry/Equipment for
crop protection
2125
Mexico City
(Mexico)
TC 59/SC 17
Buildings and civil engineering works/Sustainability in buildings
and civil engineering works
2125
Delft
(Netherlands)
TC 146/SC 6
Air quality/Indoor air
2125
Johor Bahru
(Malaysia)
TC 165
Timber structures
22
Berlin (Germany)
TC 111/SC 1
Round steel link chains, chain slings, components and
accessories/Chains and chain slings
2225
Beijing (China)
JTC 1/SC 34
Information technology/Document description and processing
languages
23
Gouda
(Netherlands)
TC 34/SC 2
Food products/Oleaginous seeds and fruits and oilseed meals
23
Berlin (Germany)
TC 111/SC 3
Round steel link chains, chain slings, components and
accessories/Components and accessories
2324
Beijing (China)
TC 290
Online reputation
2425
Gouda
(Netherlands)
TC 34/SC 11
Food products/Animal and vegetable fats and oils
2425
Winterthur
(Switzerland)
TC 226
Materials for the production of primary aluminium
25
Delft
(Netherlands)
TC 146/SC 1
Air quality/Stationary source emissions
2829
Basel
(Switzerland)
TC 44/SC 8
Welding and allied processes/Equipment for gas welding, cutting
and allied processes
2829
Delft
(Netherlands)
TC 255
Biogas
2830
New York (USA)
PC 286
Collaborative business relationship management -- Framework
29
Paris (France)
TC 86/SC 1
Refrigeration and air-conditioning/Safety and environmental
requirements for refrigerating systems
2930
Tokyo (Japan)
TC 44/SC 3
Welding and allied processes/Welding consumables
September-October 2015
212
Vienna (Austria)
JTC 1/SC 17
Information technology/Cards and personal identification
273
Bangkok
(Thailand)
TC 106
Dentistry
282
Kuala Lumpur
(Malaysia)
PC 278
Anti-bribery management systems
28-
Stockholm
TC 218
Timber
2
(Sweden)
282
Edmonton
(Canada)
TC 229
Nanotechnologies
October 2015
1
Rome (Italy)
TC 39/SC 4
Machine tools/Woodworking machines
1
Bangkok
(Thailand)
TC 106/SC 3
Dentistry/Terminology
1
Bangkok
(Thailand)
TC 106/SC 4
Dentistry/Dental instruments
1
Bangkok
(Thailand)
TC 106/SC 6
Dentistry/Dental equipment
1
Bangkok
(Thailand)
TC 106/SC 7
Dentistry/Oral care products
1
Bangkok
(Thailand)
TC 106/SC 8
Dentistry/Dental implants
1
Bangkok
(Thailand)
TC 106/SC 9
Dentistry/Dental CAD/CAM systems
2
Paris (France)
TC 86/SC 8
Refrigeration and air-conditioning/Refrigerants and refrigeration
lubricants
2
Bangkok
(Thailand)
TC 106/SC 1
Dentistry/Filling and restorative materials
2
Bangkok
(Thailand)
TC 106/SC 2
Dentistry/Prosthodontic materials
4-9
New Delhi (India)
TC 61
Plastics
4-9
New Delhi (India)
TC 61/SC 2
Plastics/Mechanical properties
5
Madrid (Spain)
TC 59
Buildings and civil engineering works
5-8
Paris (France)
TC 172/SC 1
Optics and photonics/Fundamental standards
5-9
Dublin (Ireland)
JTC 1/SC 38
Information technology/Cloud Computing and Distributed
Platforms
5-9
Madrid (Spain)
TC 59/SC 3
Buildings and civil engineering works/Functional/user
requirements and performance in building construction
5-9
Madrid (Spain)
TC 59/SC 15
Buildings and civil engineering works/Performance description of
houses
5-9
Vienna (Austria)
TC 190
Soil quality
5-9
Vienna (Austria)
TC 190/SC 3
Soil quality/Chemical methods and soil characteristics
5-9
Vienna (Austria)
TC 190/SC 4
Soil quality/Biological methods
5-9
Vienna (Austria)
TC 190/SC 7
Soil quality/Soil and site assessment
5-9
Paris (France)
TC 268
Sustainable development in communities
5-9
Paris (France)
TC 268/SC 1
Sustainable development in communities/Smart community
infrastructures
6
Madrid (Spain)
TC 59/SC 18
Buildings and civil engineering works/Construction procurement
6
Vienna (Austria)
TC 190/SC 1
Soil quality/Evaluation of criteria, terminology and codification
6
Lyon (France)
IULTCS
International Union of Leather Technologists and Chemists
Societies
6-8
London (United
Kingdom)
TC 25
Cast irons and pig irons
6-8
Paris (France)
TC 172/SC 3
Optics and photonics/Optical materials and components
7
Madrid (Spain)
TC 59/SC 2
Buildings and civil engineering works/Terminology and
harmonization of languages
7
Madrid (Spain)
TC 59/SC 16
Buildings and civil engineering works/Accessibility and usability of
the built environment
7
New Delhi (India)
TC 61/SC 1
Plastics/Terminology
7
New Delhi (India)
TC 61/SC 5
Plastics/Physical-chemical properties
7
New Delhi (India)
TC 61/SC 11
Plastics/Products
7
New Delhi (India)
TC 61/SC 12
Plastics/Thermosetting materials
8
Virtual (Unknown)
*
President's
committee
President's committee
8
Bloomington
(USA)
*
TC 23/SC 13
Tractors and machinery for agriculture and forestry/Powered lawn
and garden equipment
8
New Delhi (India)
TC 61/SC 6
Plastics/Ageing, chemical and environmental resistance
8
New Delhi (India)
TC 61/SC 13
Plastics/Composites and reinforcement fibres
8
Vienna (Austria)
TC 190/SC 2
Soil quality/Sampling
8-9
Sao Paulo (Brazil)
TC 58/SC 2
Gas cylinders/Cylinder fittings
8-9
Toronto (Canada)
TC 225
Market, opinion and social research
9
Prague (Czech
Republic)
TC 110/SC 4
Industrial trucks/Rough-terrain trucks
9
Copenhagen
(Denmark)
TC 254
Safety of amusement rides and amusement devices
1116
Potsdam
(Germany)
TC 204
Intelligent transport systems
12
Beijing (China)
TC 20/SC 4
Aircraft and space vehicles/Aerospace fastener systems
1214
Delft
(Netherlands)
TC 59/SC 8
Buildings and civil engineering works/Sealants
1214
Berlin (Germany)
TC 185
Safety devices for protection against excessive pressure
1216
Paris (France)
TC 34/SC 17
Food products/Management systems for food safety
1216
Turin (Italy)
TC 70
Internal combustion engines
1216
Berlin (Germany)
TC 138
Plastics pipes, fittings and valves for the transport of fluids
*
*
1216
Beijing (China)
13
*
TC 181
Safety of toys
New Orleans
(USA)
TC 2/SC 14
Fasteners/Surface coatings
13
Lyon (France)
TC 38/SC 1
Textiles/Tests for coloured textiles and colorants
13
Lyon (France)
TC 38/SC 2
Textiles/Cleansing, finishing and water resistance tests
1314
Osaka (Japan)
TC 24/SC 4
Particle characterization including sieving/Particle characterization
1315
Renton (USA)
TC 44/SC 14
Welding and allied processes/Welding and brazing in aerospace
14
New Orleans
(USA)
TC 2/SC 7
Fasteners/Reference standards
14
Lyon (France)
TC 38/SC 23
Textiles/Fibres and yarns
14
Lyon (France)
TC 38/SC 24
Textiles/Conditioning atmospheres and physical tests for textile
fabrics
14
Porto (Portugal)
TC 137
Footwear sizing designations and marking systems
14
Berlin (Germany)
TC 244
Industrial furnaces and associated processing equipment
1415
Beijing (China)
TC 20
Aircraft and space vehicles
15
New Orleans
(USA)
TC 2/SC 12
Fasteners/Fasteners with metric internal thread
15
La Plaine StDenis (France)
TC 17/SC 7
Steel/Methods of testing (other than mechanical tests and
chemical analysis)
15
Lyon (France)
TC 38
Textiles
15
Berlin (Germany)
TC 138/SC 6
Plastics pipes, fittings and valves for the transport of
fluids/Reinforced plastics pipes and fittings for all applications
1517
Seattle (USA)
TC 201
Surface chemical analysis
16
New Orleans
(USA)
TC 2
Fasteners
16
San Diego (USA)
TC 22/SC 34
Road vehicles/Propulsion, powertrain and powertrain fluids
16
Vienna (Austria)
TC 46/SC 8
Information and documentation/Quality - Statistics and
performance evaluation
16
Singapore
(Singapore)
TC 59/SC 13
Buildings and civil engineering works/Organization of information
about construction works
16
Neuilly-sur-Seine
(France)
TC 67/SC 9
Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries/Liquefied natural gas
installations and equipment
1823
Vichy (France)
TC 45
Rubber and rubber products
1823
Vichy (France)
TC 45/SC 4
Rubber and rubber products/Products (other than hoses)
1823
Baltimore (USA)
TC 184/SC 4
Automation systems and integration/Industrial data
1920
Santa Ana (USA)
TC 34/SC 15
Food products/Coffee
1921
Kyoto (Japan)
TC 266
Biomimetics
1921
Jeju (Korea,
Republic of)
TC 281
Fine Bubble Technology
1922
Vichy (France)
TC 45/SC 1
Rubber and rubber products/Rubber and plastics hoses and hose
assemblies
1923
Matsue (Japan)
JTC 1/SC 2
Information technology/Coded character sets
1923
(Germany)
** TC 39/SC 2
1923
Brussels
(Belgium)
TC 154
Processes, data elements and documents in commerce, industry
and administration
20
Metz (France)
TC 173/SC 2
Assistive products for persons with disability/Classification and
terminology
2021
La Plaine StDenis (France)
TC 23/SC 3
Tractors and machinery for agriculture and forestry/Safety and
comfort
2021
Sao Paulo (Brazil)
TC 135/SC 9
Non-destructive testing/Acoustic emission testing
2023
Oslo (Norway)
TC 58/SC 3
Gas cylinders/Cylinder design
2023
Beijing (China)
TC 269
Railway applications
21
Stockholm
(Sweden)
TC 17/SC 1
Steel/Methods of determination of chemical composition
21
Gaithersburg
(USA)
TC 92/SC 1
Fire safety/Fire initiation and growth
21
Dublin (Ireland)
TC 279
Innovation management
2123
Katowize (Poland)
TC 263
Coalbed methane (CBM)
22
Vienna (Austria)
TC 83/SC 4
Sports and other recreational facilities and equipment/Snowsports
equipment
22
Gaithersburg
(USA)
TC 92/SC 3
Fire safety/Fire threat to people and environment
22
Santiago (Chile)
TC 195
Building construction machinery and equipment
22
Frankfurt
(Germany)
TC 291
Domestic gas cooking appliances
2223
Göteborg
(Sweden)
TC 22/SC 33
Road vehicles/Vehicle dynamics and chassis components
2223
London (United
Kingdom)
TC 79/SC 2
Light metals and their alloys/Organic and anodic oxidation
coatings on aluminium
Machine tools/Test conditions for metal cutting machine tools
2223
Berlin (Germany)
TC 209
Cleanrooms and associated controlled environments
23
Vichy (France)
TC 45/SC 3
Rubber and rubber products/Raw materials (including latex) for
use in the rubber industry
23
Gaithersburg
(USA)
TC 92
Fire safety
23
Gaithersburg
(USA)
TC 92/SC 2
Fire safety/Fire containment
23
Gaithersburg
(USA)
TC 92/SC 4
Fire safety/Fire safety engineering
26
Arlington (USA)
TC 79/SC 6
Light metals and their alloys/Wrought aluminium and aluminium
alloys
2629
Pretoria (South
Africa)
** TC 264
2630
St. Petersburg
(Russian
Federation)
TC 8
Ships and marine technology
2630
Porto Alegre
(Brazil)
TC 23/SC 17
Tractors and machinery for agriculture and forestry/Manually
portable forest machinery
2631
(China)
27
St. Petersburg
(Russian
Federation)
TC 8/SC 6
Ships and marine technology/Navigation and ship operations
27
St. Petersburg
(Russian
Federation)
TC 8/SC 7
Ships and marine technology/Inland navigation vessels
2728
Greenville (USA)
TC 31/SC 9
Tyres, rims and valves/Valves for tube and tubeless tyres
28
Arlington (USA)
TC 79/SC 5
Light metals and their alloys/Magnesium and alloys of cast or
wrought magnesium
2829
La Plaine StDenis (France)
TC 135/SC 4
Non-destructive testing/Eddy current methods
2829
Mainz (Germany)
TC 199
Safety of machinery
2830
Tsukuba (Japan)
TC 202
Microbeam analysis
29
Seoul (Korea,
Republic of)
TC 71
Concrete, reinforced concrete and pre-stressed concrete
29
Washington, D.C
(USA)
TC 79
Light metals and their alloys
29
Silver Spring
(USA)
TC 234
Fisheries and aquaculture
29
Berlin (Germany)
TC 256
Pigments, dyestuffs and extenders
29-
Tampa, Florida
TC 17/SC 12
Steel/Continuous mill flat rolled products
** JTC 1
*
*
Fireworks
Information technology
30
(USA)
November 2015
2
Atlanta (USA)
*
TC 41/SC 3
2-4
Beijing (China)
** PC 295
2-4
Montreal
(Canada)
TC 20/SC 9
Aircraft and space vehicles/Air cargo and ground equipment
2-6
Bern (Switzerland)
TC 215
Health informatics
2-6
Beijing (China)
TC 282
Water re-use
2-6
Beijing (China)
TC 282/SC 1
Water re-use/Treated wastewater re-use for Irrigation
2-6
Beijing (China)
TC 282/SC 2
Water re-use/Water re-use in urban areas
2-8
Seoul (Korea,
Republic of)
** TC 130
Graphic technology
3
Atlanta (USA)
*
TC 41/SC 1
Pulleys and belts (including veebelts)/Friction
3
Berlin (Germany)
*
TC 83
Sports and other recreational facilities and equipment
3-6
Accra (Ghana)
TC 285
Clean cookstoves and clean cooking solutions
4
Atlanta (USA)
TC 41/SC 4
Pulleys and belts (including veebelts)/Synchronous belt drives
4
(Australia)
4
Beijing (China)
5
Atlanta (USA)
6
** TC 110/SC 1
Pulleys and belts (including veebelts)/Conveyor belts
Audit data collection
Industrial trucks/General terminology
TC 282/SC 3
Water re-use/Risk and performance evaluation of water re-use
systems
TC 41
Pulleys and belts (including veebelts)
Sydney (Australia)
TC 110
Industrial trucks
6
Sydney (Australia)
TC 110/SC 5
Industrial trucks/Sustainability
912
Sevilla (Spain)
** TC 189
Ceramic tile
912
Rio de Janeiro
(Brazil)
*
TC 262
Risk management
913
London (United
Kingdom)
*
PC 287
Chain of custody of wood and wood-based products
913
Kobe (Japan)
TC 21
Equipment for fire protection and fire fighting
913
Tokyo (Japan)
TC 94/SC 15
Personal safety -- Protective clothing and equipment/Respiratory
protective devices
913
Sydney (Australia) *
TC 275
Sludge recovery, recycling, treatment and disposal
1013
(Switzerland)
11
Vicenza (Italy)
11
Nottingham
(United Kingdom)
*
** TC 112
*
Vacuum technology
TC 44/SC 13
Welding and allied processes/Brazing materials and processes
TC 60
Gears
1113
Munich
(Germany)
1113
(Malaysia)
1113
Geel (Belgium)
1213
Kuala Lumpur
(Malaysia)
1213
Galveston (USA)
TC 260
Human resource management
13
Apeldoorn
(Netherlands)
TC 22/SC 41
Road vehicles/Specific aspects for gaseous fuels
16
Cleveland (USA)
PC 252
Natural gas fuelling stations for vehicles
1617
Brasilia (Brazil)
TC 241
Road traffic safety management systems
1618
Bergamo (Italy)
1620
Kyoto (Japan)
1620
(USA)
** TC 210
Quality management and corresponding general aspects for
medical devices
1621
Washington, D.C
(USA)
*
TC 98/SC 3
Bases for design of structures/Loads, forces and other actions
1719
Agen (France)
*
TC 20/SC 10
Aircraft and space vehicles/Aerospace fluid systems and
components
18
Stockholm
(Sweden)
TC 10/SC 8
Technical product documentation/Construction documentation
19
Reston (USA)
TC 98/SC 2
Bases for design of structures/Reliability of structures
2028
Hong Kong (Hong
Kong, China)
TC 176
Quality management and quality assurance
2327
Ardooie (Belgium)
TC 188/SC 1
Small craft/Personal safety equipment
2426
(Australia)
** PC 294
Guidance on unit pricing
Istanbul (Turkey)
** TC 120
Leather
TC 44/SC 12
** TC 123
TC 212
** TC 227
** TC 147/SC 3
TC 160
*
Welding and allied processes/Soldering materials
Plain bearings
Clinical laboratory testing and in vitro diagnostic test systems
Springs
Water quality/Radioactivity measurements
Glass in building
November-December 2015
1621
Virginia (USA)
TC 98
Bases for design of structures
304
Bali (Indonesia)
TC 292
Security and resilience
TC 22/SC 31
Road vehicles/Data communication
December 2015
3-4
Auburn Hills
(USA)
3-4
Torrance (USA)
TC 197
Hydrogen technologies
10
Berlin (Germany)
TC 44/SC 6
Welding and allied processes/Resistance welding and allied
mechanical joining
1011
Sydney (Australia) *
TC 211
Geographic information/Geomatics
1418
Berlin (Germany)
TC 198
Sterilization of health care products
Istanbul (Turkey)
** TC 180
Solar energy
(United Arab
Emirates)
** TC 217
Cosmetics
Lyon (France)
** TC 272
Forensic sciences
** TC 159/SC 3
Ergonomics/Anthropometry and biomechanics
*
4th Quarter 2015
Dayton, Ohio
(USA)
October 2015
1216
Berlin (Germany)
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of
fluids/Plastics pipes and fittings for soil, waste and drainage
(including land drainage)
1216
Berlin (Germany)
TC 138/SC 2
Plastics pipes, fittings and valves for the transport of
fluids/Plastics pipes and fittings for water supplies
1216
Berlin (Germany)
TC 138/SC 3
Plastics pipes, fittings and valves for the transport of
fluids/Plastics pipes and fittings for industrial applications
1216
Berlin (Germany)
TC 138/SC 4
Plastics pipes, fittings and valves for the transport of
fluids/Plastics pipes and fittings for the supply of gaseous fuels
1216
Berlin (Germany)
TC 138/SC 5
Plastics pipes, fittings and valves for the transport of
fluids/General properties of pipes, fittings and valves of plastic
materials and their accessories -- Test methods and basic
specifications
1216
Berlin (Germany)
TC 138/SC 7
Plastics pipes, fittings and valves for the transport of fluids/Valves
and auxiliary equipment of plastics materials
TC 268
Sustainable development in communities
January 2016
1115
Vienna (Austria)
*
1115
Vienna (Austria)
** TC 268/SC 1
Sustainable development in communities/Smart community
infrastructures
22
Berlin (Germany)
*
Transfusion, infusion and injection, and blood processing
equipment for medical and pharmaceutical use
2529
London (United
Kingdom)
** TC 107
Metallic and other inorganic coatings
2529
London (United
Kingdom)
** TC 107/SC 3
Metallic and other inorganic coatings/Electrodeposited coatings
and related finishes
TC 76
2529
London (United
Kingdom)
** TC 107/SC 8
Metallic and other inorganic coatings/Chemical conversion
coatings
Gas cylinders/Operational requirements for gas cylinders
February 2016
812
Paris (France)
*
29
Birmingham
(United Kingdom)
** TC 257
Evaluation of energy savings
(USA)
** TC 213
Dimensional and geometrical product specifications and
verification
Geneva
(Switzerland)
** TMB
Technical Management Board
TC 58/SC 4
March 2016
3-4
(Unknown)
** TC 182/SC 1
Geotechnics/Geotechnical investigation and testing
1418
Kanazawa
(Japan)
*
Personal safety -- Protective clothing and equipment/Protective
clothing
1418
Sydney (Australia) ** TC 108/SC 2
Mechanical vibration, shock and condition
monitoring/Measurement and evaluation of mechanical vibration
and shock as applied to machines, vehicles and structures
1418
Sydney (Australia) ** TC 108/SC 5
Mechanical vibration, shock and condition monitoring/Condition
monitoring and diagnostics of machine systems
17
Milan (Italy)
TC 221
Geosynthetics
1718
Geneva
(Switzerland)
COUNCIL
Council
*
TC 94/SC 13
1st Quarter 2016
Singapore
(Singapore)
** TC 67/SC 7
Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries/Offshore structures
*
Fans
April 2016
1112
Beijing (China)
1115
Sydney (Australia) ** TC 178
Lifts, escalators and moving walks
1213
(Europe)
** TC 67/SC 2
Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries/Pipeline transportation
systems
1819
Tampa, Florida
(USA)
** JTC 1/SC 27
Information technology/IT Security techniques
2223
ClausthalZellerfeld
(Germany)
*
Particle characterization including sieving/Particle characterization
25
Frankfurt
(Germany)
** TC 68/SC 4
Financial services/Securities and related financial instruments
25-
Berlin (Germany)
** TC 161
Control and protective devices for gas and/or oil burners and
TC 117
TC 24/SC 4
29
26
appliances
Frankfurt
(Germany)
*
Toronto (Canada)
** JTC 1/SC 38
Information technology/Cloud Computing and Distributed
Platforms
TC 68/SC 7
Financial services/Core banking
May 2016
613
Berlin (Germany)
** TC 10
Technical product documentation
913
Paris (France)
*
Food products/Microbiology
913
(USA)
** TC 276
Biotechnology
1620
Suzhou (China)
*
Information technology/IT Service Management and IT
Governance
1620
Chicago (USA)
** TC 121
Anaesthetic and respiratory equipment
2227
Sapporo (Japan)
*
Automation systems and integration/Industrial data
2325
Rome (Italy)
** TC 145
Graphical symbols
2328
Stockholm
(Sweden)
*
Graphic technology
25
Brussels
(Belgium)
** TC 115
Pumps
2627
(Malaysia)
** TC 228
Tourism and related services
(Italy)
** TC 67/SC 4
Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries/Drilling and production
equipment
(India)
** TC 85
Nuclear energy, nuclear technologies, and radiological protection
(Korea, Republic
of)
** TC 122
Packaging
(USA)
** TC 282/SC 3
Water re-use/Risk and performance evaluation of water re-use
systems
Corrosion of metals and alloys
TC 34/SC 9
JTC 1/SC 40
TC 184/SC 4
TC 130
June 2016
710
Prague (Czech
Republic)
*
1417
Ekaterinburg
(Russian
Federation)
** REMCO
Committee on reference materials
1516
Geneva
(Switzerland)
*
TMB
Technical Management Board
18-
Munich
TC 135
Non-destructive testing
TC 156
20
(Germany)
(Germany)
** JTC 1/SC 36
Information technology/Information technology for learning,
education and training
(Europe)
** TC 22/SC 38
Road vehicles/Motorcycles and mopeds
(Germany)
** TC 29/SC 10
Small tools/Assembly tools for screws and nuts, pliers and nippers
St. Petersburg
(Russian
Federation)
** TC 172/SC 4
Optics and photonics/Telescopic systems
Stockholm
(Sweden)
** TC 242
Energy Management
Turin (Italy)
** TC 274
Light and lighting
** TC 224
Service activities relating to drinking water supply systems and
wastewater systems - Quality criteria of the service and
performance indicators
June-July 2016
271
(Unknown)
271
Hangzhou (China) ** TC 268
Sustainable development in communities
271
Hangzhou (China) ** TC 268/SC 1
Sustainable development in communities/Smart community
infrastructures
2nd Quarter 2016
(Germany)
** TC 34/SC 4
Food products/Cereals and pulses
1st Semester 2016
(France)
** TC 23
Tractors and machinery for agriculture and forestry
New Delhi (India)
** TC 34/SC 7
Food products/Spices, culinary herbs and condiments
(China)
** TC 34/SC 16
Food products/Horizontal methods for molecular biomarker
analysis
Chennai (India)
** TC 120
Leather
September 2016
19
Beijing (China)
*
COUNCIL
Council
20
Beijing (China)
*
TMB
Technical Management Board
2123
Beijing (China)
*
GA
General Assembly
Vienna (Austria)
** JTC 1/SC 22
Information technology/Programming languages, their
environments and system software interfaces
Paris (France)
** TC 17
Steel
Sao Paulo (Brazil)
** TC 173
Assistive products for persons with disability
Sao Paulo (Brazil)
** TC 209
Cleanrooms and associated controlled environments
Shanghai (China)
** TC 213
Dimensional and geometrical product specifications and
verification
Beijing (China)
** TC 256
Pigments, dyestuffs and extenders
** TC 289
Brand evaluation
3rd Quarter 2016
(USA)
October 2016
6-7
Berlin (Germany)
** TC 119
Powder metallurgy
1721
Berlin (Germany)
** JTC 1/SC 38
Information technology/Cloud Computing and Distributed
Platforms
1721
(China)
** TC 5/SC 2
Ferrous metal pipes and metallic fittings/Cast iron pipes, fittings
and their joints
1721
Kyoto (Japan)
*
TC 138
Plastics pipes, fittings and valves for the transport of fluids
2021
London (United
Kingdom)
*
TC 58
Gas cylinders
(Brazil)
** TC 59
Buildings and civil engineering works
(Korea, Republic
of)
** TC 201
Surface chemical analysis
Tel Aviv (Israel)
** TC 282
Water re-use
Tel Aviv (Israel)
** TC 282/SC 3
Water re-use/Risk and performance evaluation of water re-use
systems
** JTC 1
Information technology
Delft
(Netherlands)
** TC 28
Petroleum products and related products of synthetic or biological
origin
Delft
(Netherlands)
** TC 28/SC 5
Petroleum products and related products of synthetic or biological
origin/Measurement of refrigerated hydrocarbon and nonpetroleum based liquefied gaseous fuels
Delft
(Netherlands)
** TC 28/SC 7
Petroleum products and related products of synthetic or biological
origin/Liquid Biofuels
(India)
** TC 113
Hydrometry
November 2016
712
Lillehammer
(Norway)
4th Quarter 2016
2nd Semester 2016
Paris (France)
** TC 34/SC 18
Food products/Cocoa
Month unknown 2016
(Korea, Republic
of)
** JTC 1/SC 23
Information technology/Digitally Recorded Media for Information
Interchange and Storage
(Denmark)
** TC 37
Terminology and other language and content resources
(South Africa)
** TC 44
Welding and allied processes
(Malaysia)
** TC 45
Rubber and rubber products
Wellington (New
Zealand)
** TC 46
Information and documentation
Wellington (New
Zealand)
** TC 46/SC 11
Information and documentation/Archives/records management
(Sweden)
** TC 102
Iron ore and direct reduced iron
(Japan)
** TC 138/SC 2
Plastics pipes, fittings and valves for the transport of
fluids/Plastics pipes and fittings for water supplies
(Japan)
** TC 183
Copper, lead, zinc and nickel ores and concentrates
** TC 29/SC 8
Small tools/Tools for pressing and moulding
Washington, D.C
(USA)
** TC 4
Rolling bearings
(Sweden)
** TC 29
Small tools
(Australia)
** JTC 1/SC 36
Information technology/Information technology for learning,
education and training
(USA)
** TC 42
Photography
April 2017
10
Guilin (China)
May 2017
June 2017
2nd Quarter 2017
(North America)
** TC 31
Tyres, rims and valves
London (United
Kingdom)
** JTC 1/SC 22
Information technology/Programming languages, their
environments and system software interfaces
New Delhi (India)
** TC 178
Lifts, escalators and moving walks
** TC 289
Brand evaluation
** TC 54
Essential oils
September 2017
3rd Quarter 2017
Vienna (Austria)
November 2017
(India)
Month unknown 2017
(United Kingdom)
** TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective
clothing
Seoul (Korea,
Republic of)
** TC 161
Control and protective devices for gas and/or oil burners and
appliances
** JTC 1/SC 36
Information technology/Information technology for learning,
June 2018
(Korea, Republic
of)
education and training
Month unknown 2018
(USA)
** TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective
clothing
Milan (Italy)
** TC 161
Control and protective devices for gas and/or oil burners and
appliances