ISO Update
Supplement to ISOfocus
September 2015
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International
Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been
reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The
DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 August to 31 August 2015
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 12
Quantities and units
ISO/CD 800009
Quantities and units — Part 9: Physical chemistry and molecular physics
TC 22
Road vehicles
ISO/CD 7637-4
Road Vehicles — Electrical disturbance by conduction and coupling — Part 4: Electrical transient conduction along shielded
high voltage supply lines only
ISO/CD 3888-1
Passenger cars — Test track for a severe lane-change manoeuvre — Part 1: Double lane-change
ISO/CD 7975
Passenger cars — Braking in a turn — Open-loop test method
ISO/CD 9816
Passenger cars — Power-off reaction of a vehicle in a turn — Open-loop test method
ISO/DTR
17950
Impact test procedures for road vehicles — Seating and positioning procedures for anthropomorphic test devices
TC 28
Petroleum products and related products of synthetic or biological origin
ISO/CD 6246
Petroleum products — Gum content of light and middle distillate fuels — Jet evaporation method
TC 30
Measurement of fluid flow in closed conduits
ISO/CD 20456
Measurement of fluid flow in closed conduits — Guidance for the use of electromagnetic flowmeters for liquids
TC 31
Tyres, rims and valves
ISO/CD 16992
Passenger car tyres — Spare unit substitutive equipment (SUSE)
ISO/CD 19940
Tyre Stiffness Index testing procedure for Passenger Extended Mobility tyres
TC 39
Machine tools
ISO/CD 130411
Test conditions for numerically controlled turning machines and turning centres — Part 1: Geometric tests for machines with
a horizontal workholding spindle
ISO/CD TR
17243-2
Machine tool spindles — Evaluation of spindle vibrations by measurements on non-rotating parts — Part 2: Direct driven
spindles and belt driven spindles with rolling element bearings operating at speeds between 600 min-1 and 30 000 min-1
TC 45
Rubber and rubber products
ISO/DTS 289-4
Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 4: Determination of the Mooney stressrelaxation rate
TC 61
Plastics
ISO/CD 220071
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 1: General principles
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO/CD 35106
Petroleum and natural gas industries — Arctic operations — Arctic metocean, ice and seabed data
TC 69
Applications of statistical methods
ISO/CD TR
16355-8
Application of statistical and related methods to new technology and product development process — Part 8: Guidelines for
commercialization and life cycle
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO/CD 194611
Radiological protection — Measurement for the clearance of waste contaminated with radioisotopes for medical application
— Part 1: Measurement of radioactivity
ISO/CD 22875
Nuclear energy — Determination of chlorine and fluorine in uranium dioxide powder and sintered pellets
TC 121
Anaesthetic and respiratory equipment
ISO/CD 11195
Gas mixers for medical use — Stand-alone gas mixers
TC 127
Earth-moving machinery
ISO/CD 109872
Earth-moving machinery — Sustainability — Terminology, sustainability factors and reporting — Part 2: Remanufacturing
ISO/CD 109873
Earth-moving machinery — Sustainability — Terminology, sustainability factors and reporting — Part 3: Used machines
ISO/DTR
19948
Conformity Assessment and Certification Process for Earth-moving Machinery
TC 130
Graphic technology
ISO/DTS
15311-2
Graphic technology — Requirements for printed matter for commercial and industrial production — Part 2: Commercial
production printing
ISO/CD 16762
Graphic technology — Requirements for postpress — General
ISO/CD 20690
Power consumption of digital printing devices
TC 131
Fluid power systems
ISO/CD 6162-2
Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2:
Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
ISO/DTS
11686
Connectors for fluid power and general use – Assembly instructions for connectors with adjustable stud ends and O-ring
sealing
ISO/CD 5782-1
Pneumatic fluid power — Compressed-air filters — Part 1: Main characteristics to be included in suppliers' literature and
product marking requirements
ISO/CD 20145
Pneumatic fluid power — Test method for measuring acoustic emission pressure level of exhaust silencers.
TC 146
Air quality
ISO/CD 19087
Workplace air — Measurement of respirable crystalline silica by infrared spectrometry
TC 147
Water quality
ISO/CD 20596
Water quality — Determination of cyclic volatile methylsiloxanes in water — Method using gas chromatography-mass spectrometry (GC-MS)
TC 171
Document management applications
ISO/CD 142892
Document management applications — Electronic document file format enhancement for accessibility — Part 2: Use of ISO
32000-2 (PDF/UA-2)
TC 190
Soil quality
ISO/CD 20295
Soil quality — Determination of perchlorate in soil using ion chromatography
TC 195
Building construction machinery and equipment
ISO/CD 197201
Building construction machinery and equipment — Plants for the preparation of concrete and mortar — Part 1: Terminology
and commercial specifications
TC 197
Hydrogen technologies
ISO/DTR
19880-1
Gaseous hydrogen — Fueling stations — Part 1: General requirements
ISO/CD 19881
Gaseous Hydrogen — Land Vehicle Fuel Tanks
TC 199
Safety of machinery
ISO/CD 17305
Safety of machinery — Safety functions of control systems
TC 204
Intelligent transport systems
ISO/DTS
21219-14
Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2
(TPEG2) — Part 14: Parking information application (TPEG2-PKI)
ISO/DTS
21219-15
Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2
(TPEG2) — Part 15: Traffic event compact (TPEG2-TEC)
ISO/DTS
21219-16
Intelligent transport systems — Traffic and travel information (TTI) via transport protocol expert group, generation 2
(TPEG2) — Part 16: Fuel price information application (TPEG2-FPI)
TC 220
Cryogenic vessels
ISO/CD 23208
Cryogenic vessels — Cleanliness for cryogenic service
TC 238
Solid biofuels
ISO/CD 19743
Solid biofuels — Determination of content of heavy extraneous materials large than 3,15 mm
TC 249
Traditional chinese medicine
ISO/CD 20408
Traditional Chinese Medicine-Panax Notoginseng Seeds and Seedlings
TC 268
Sustainable development in communities
ISO/DTR
37121
Inventory and review of existing indicators on sustainable development and resilience in cities
CASCO
Committee on conformity assessment
ISO/IEC CD
17011
Conformity assessment — Requirements for accreditation bodies accrediting conformity assessment bodies
JTC 1
Information technology
ISO/IEC/IEEE
PDTS 24748-6
Systems and software engineering — Life cycle management — Part 6: Guide to system integration engineering
ISO/IEC PDTR
29110-5-1-3
Systems and software engineering - Lifecycle profiles for Very Small Entities (VSE) — Part 5-1-3: Software engineering Management and engineering guide: Generic profile group - Intermediate profile
ISO/IEC CD
10118-1
Information technology — Security techniques — Hash-functions — Part 1: General
ISO/IEC CD
19592-1
Information technology — Security techniques — Secret Sharing — Part 1: General
ISO/IEC
1449610:2014/PDAM
3
Information technology — Coding of audio-visual objects — Part 10: Advanced Video Coding — Amendment 3: Additional
Supplemental Enhancement Information
ISO/IEC CD
14496-33
Information technology — Coding of audio-visual objects — Part 33: Internet Video Coding
ISO/IEC CD
15938-14
Information technology — Multimedia content description interface — Part 14: Reference software, conformance and usage
guidelines for Compact Descriptors for Visual Search (CDVS)
ISO/IEC CD
30107-3
Information technology — Biometric presentation attack detection — Part 3: Testing and reporting
ISO/IEC CD
20000-6
Information Technology — Service Management — Part 6: Requirements for bodies providing audit and certification of service management systems
DIS circulated
Period from 01 August to 31 August 2015
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
PC 252
Natural gas fuelling stations for vehicles
ISO/DIS
16923.2
*
ISO/DIS
16924.2
*
2015-10-18
Natural gas fuelling stations — LNG stations for fuelling vehicles
2015-10-18
TC 6
ISO/DIS
Natural gas fuelling stations — CNG stations for fuelling vehicles
Paper, board and pulps
*
Paper and board — Determination of internal bond strength
16260.2
2015-10-28
TC 17
ISO/DIS 4885
Steel
*
Ferrous products — Heat treatments — Vocabulary
2015-11-07
(Revision of ISO 4885:1996)
ISO/DIS 14590
*
Cold-reduced steel sheet of high tensile strength and low yield point with improved
formability
2015-11-11
(Revision of ISO 14590:2005)
TC 21
ISO/DIS 61826
Equipment for fire protection and fire fighting
*
Fire protection — Automatic sprinkler systems — Part 6: Requirements and test methods for check valves
2015-11-04
(Revision of ISO 6182-6:2006)
ISO/DIS 61827
*
Fire protection — Automatic sprinkler systems — Part 7: Requirements and test methods for early suppression fast response (ESFR) sprinklers
2015-11-18
(Revision of ISO 6182-7:2004)
ISO/DIS 618213
*
TC 22
Fire protection — Automatic sprinkler systems — Part 13: Requirements and test methods for extended-coverage sprinklers
2015-11-18
Road vehicles
ISO/DIS
18541-6
*
ISO/DIS 3536
*
Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 6: L-Category vehicle specific RMI use cases and requirements
2015-11-07
Road vehicles — Safety glazing materials — Vocabulary
2015-11-04
(Revision of ISO 3536:1999)
ISO/DIS
15500-2
*
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 2:
Performance and general test methods
2015-11-20
(Revision of ISO 15500-2:2012)
ISO 155003:2012/DAmd
1
*
ISO 155004:2012/DAmd
1
*
ISO 155005:2012/DAmd
1
*
ISO 155006:2012/DAmd
1
*
ISO 155009:2012/DAmd
1
*
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 3:
Check valve — Amendment 1
2015-11-20
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 4:
Manual valve — Amendment 1
2015-11-20
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 5:
Manual cylinder valve — Amendment 1
2015-11-20
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 6:
Automatic valve — Amendment 1
2015-11-20
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 9:
Pressure regulator — Amendment 1
2015-11-20
ISO 1550013:2012/DAmd
1
*
ISO 1550014:2012/DAmd
1
*
ISO 1550016:2012/DAmd
1
*
ISO 1550017:2012/DAmd
1
*
ISO 1550018:2012/DAmd
1
*
ISO 1550019:2012/DAmd
1
*
TC 23
*
ISO 53953:2013/DAmd
1
*
ISO 158863:2012/DAmd
1
*
TC 33
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 14:
Excess flow valve — Amendment 1
2015-11-20
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 16:
Rigid fuel line in stainless steel — Amendment 1
2015-11-20
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 17:
Flexible fuel line — Amendment 1
2015-11-20
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 18:
Filter — Amendment 1
2015-11-20
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 19:
Fittings — Amendment 1
2015-11-20
Garden equipment — Safety requirements for
combustion-engine-powered lawnmowers — Part 2: Pedestrian-controlled lawnmowers
— Amendment 1: OPC, Cutting means acceptance criteria — Pressurized hoses of
hydraulic systems
Garden equipment — Safety requirements for
combustion-engine-powered lawnmowers — Part 3: Ride-on lawnmowers with seated
operator — Amendment 1: OPC, Parking brake, ROPS, Pressurized hoses of hydraulic
systems, Cutting means acceptance criteria, Clause A.2.7, Annex B Figure 4
Agricultural irrigation equipment — Sprinklers — Part 3: Characterization of distribution
and test methods — Amendment 1
2015-11-07
2015-11-07
2015-11-18
Refractories
*
TC 34
ISO/DIS 10273
2015-11-20
Tractors and machinery for agriculture and forestry
ISO 53952:2013/DAmd
1
ISO/DIS 18886
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 13:
Pressure relief device (PRD) — Amendment 1
Refractory test-piece preparation — Gunning refractory panels by wet gunning techniques
2015-11-18
Food products
*
Microbiology of the food chain — Horizontal method for the detection of pathogenic
Yersinia enterocolitica
2015-11-07
(Revision of ISO 10273:2003)
ISO/DIS
15216-1
*
Microbiology of the food chain — Horizontal method for determination of hepatitis A
virus and norovirus in food using real-time RT-PCR — Part 1: Method for quantification
2015-11-07
(Revision of ISO/TS 15216-1:2013)
TC 38
ISO/DIS
12947-2.2
Textiles
*
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method
— Part 2: Determination of specimen breakdown
2015-10-14
(Revision of ISO 12947-2:1998, ISO 12947-2:1998/Cor 1:2002)
TC 44
ISO/DIS 22829
Welding and allied processes
*
Resistance welding — Transformer-rectifier for welding guns with integrated transformers — Transformer-rectifier units operating at 1000 Hz frequency
2015-11-14
(Revision of ISO 22829:2007)
ISO/DIS
15618-1
*
Qualification testing of welders for underwater welding — Part 1: Diver-welders for
hyperbaric wet welding
2015-11-07
(Revision of ISO 15618-1:2001)
TC 45
ISO/DIS 8789
Rubber and rubber products
*
Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles —
Specification
2015-11-12
(Revision of ISO 8789:2009)
ISO/DIS
1434.2
*
Natural rubber in bales — Amount of bale coating — Determination
2015-10-12
(Revision of ISO 1434:1995)
TC 61
ISO/DIS 10433
Plastics
*
Plastics — Symbols and abbreviated terms — Part 3: Plasticizers
2015-11-07
(Revision of ISO 1043-3:1996)
ISO/DIS 11469
*
Plastics — Generic identification and marking of plastics products
2015-11-14
(Revision of ISO 11469:2000)
TC 67
ISO/DIS
14692-1
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
*
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part
1: Vocabulary, symbols, applications and materials
2015-11-07
(Revision of ISO 14692-1:2002)
ISO/DIS
14692-2
*
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part
2: Qualification and manufacture
2015-11-14
(Revision of ISO 14692-2:2002, ISO 14692-2:2002/Cor 1:2005)
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part
3: System design
ISO/DIS
14692-3
2015-11-07
(Revision of ISO 14692-3:2002, ISO 14692-3:2002/Cor 1:2005)
ISO/DIS
14692-4
*
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part
4: Fabrication, installation and operation
2015-11-14
(Revision of ISO 14692-4:2002, ISO 14692-4:2002/Cor 1:2006)
ISO/DIS
19901-2
*
Petroleum and natural gas industries — Specific requirements for offshore structures —
Part 2: Seismic design procedures and criteria
(Revision of ISO 19901-2:2004)
TC 83
ISO/DIS 8936
Sports and other recreational facilities and equipment
*
Awnings for leisure accommodation vehicles — Requirements and test methods
2015-11-14
2015-11-14
(Revision of ISO 8936:2007)
ISO/DIS
20957-4
*
Stationary training equipment — Part 4: Strength training benches, additional specific
safety requirements and test methods
2016-01-29
(Revision of ISO 20957-4:2005)
ISO/DIS
20957-5
*
Stationary training equipment — Part 5: Pedal crank training equipment, additional specific safety requirements and test methods
2016-01-22
(Revision of ISO 20957-5:2005)
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO/DIS
11665-10.2
Measurement of radioactivity in the environment — Air: radon-222 — Part 10: Determination of diffusion coefficient in waterproof materials using activity concentration measurement
TC 92
Fire safety
ISO/DIS
12828-2
*
Personal safety -- Protective clothing and equipment
*
TC 96
ISO/DIS 43063.2
Validation methods for fire gas analyses — Part 2: Validation of quantification method
2015-11-25
TC 94
ISO/DIS
16975-1.3
2015-10-26
Respiratory protective devices — Selection, use and maintenance — Part 1: Establishing and implementing a respiratory protective device programme
2015-10-29
Cranes
*
Cranes — Vocabulary — Part 3: Tower cranes
2015-10-18
(Revision of ISO 4306-3:2003, ISO 4306-3:2003/Amd 1:2011)
TC 107
ISO/DIS 19487
Metallic and other inorganic coatings
*
TC 108
ISO/DIS
16063-17
Metallic and other inorganic coatings — Electrodeposited nickel-ceramics composite
coating
2015-11-04
Mechanical vibration, shock and condition monitoring
*
Methods for the calibration of vibration and shock transducers — Part 17: Primary calibration by centrifuge
2015-11-25
(Revision of ISO 5347-7:1993)
ISO/DIS
10326-1
*
Mechanical vibration — Laboratory method for evaluating vehicle seat vibration — Part
1: Basic requirements
2015-11-14
(Revision of ISO 10326-1:1992, ISO 10326-1:1992/Amd 1:2007, ISO 103261:1992/Amd 2:2011)
TC 110
ISO/DIS
18063-1
Industrial trucks
*
Rough-terrain trucks — Visibility — Test methods and their verification — Part 1: Variable-reach trucks
(Revision of ISO/CD 18063)
TC 121
Anaesthetic and respiratory equipment
2015-11-06
ISO/DIS 5366
*
Anaesthetic and respiratory equipment — Tracheostomy tubes
2015-11-14
(Revision of ISO/DIS 5366-1, ISO/DIS 5366-3)
TC 123
ISO/DIS 19349
Plain bearings
*
Plain bearings — Lubrication and control
2015-11-18
TC 130
ISO/DIS 12634
Graphic technology
*
Graphic technology — Determination of tack of paste inks and vehicles by a rotary
tackmeter
2015-11-18
(Revision of ISO 12634:1996)
TC 150
ISO/DIS
14708-3
Implants for surgery
*
Implants for surgery — Active implantable medical devices — Part 3: Implantable neurostimulators
2015-11-14
(Revision of ISO 14708-3:2008)
TC 156
ISO/DIS 65092.2
Corrosion of metals and alloys
*
Corrosion of metals and alloys — Determination of dezincification resistance of copper
alloys with zinc — Part 2: Assessment criteria
2015-10-18
(Revision of ISO 6509:1981)
ISO/DIS 9227
*
Corrosion tests in artificial atmospheres — Salt spray tests
2015-11-14
(Revision of ISO 9227:2012)
TC 157
ISO/DIS 25841
Non-systemic contraceptives and STI barrier prophylactics
*
Female condoms — Requirements and test methods
2015-11-04
(Revision of ISO 25841:2014)
TC 159
ISO/DIS 9241960
Ergonomics
*
TC 163
Ergonomics of human-system interaction — Part 960: Framework and guidance for
gesture interactions
2015-11-07
Thermal performance and energy use in the built environment
ISO/DIS
52000-1
*
ISO/DIS
52003-1
*
Energy performance of buildings — Overarching EPB assessment — Part 1: General
framework and procedures
2015-11-28
Energy performance of buildings — Indicators, requirements and certification — Part 1:
General aspects and application to the overall energy performance
2015-11-07
(Revision of ISO 16343:2013)
ISO/DIS 16957
TC 164
*
Measurement of apparent thermal conductivity of wet porous building materials by a
periodic method
Mechanical testing of metals
2015-11-12
ISO/DIS 148-1
*
Metallic materials — Charpy pendulum impact test — Part 1: Test method
2016-01-22
(Revision of ISO 148-1:2009)
ISO/DIS 148-2
*
Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines
2015-11-07
(Revision of ISO 148-2:2008)
ISO/DIS 148-3
*
Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
2015-11-07
(Revision of ISO 148-3:2008)
TC 165
Timber structures
ISO/DIS
12122-3
*
ISO/DIS
12122-4
*
TC 172
ISO/DIS 18189
Timber structures — Determination of characteristic values — Part 3: Glued laminated
timber
2015-11-18
Timber structures — Determination of characteristic values — Part 4: Engineered wood
products
2015-11-16
Optics and photonics
*
Ophthalmic optics — Contact lenses and contact lens care products — Cytotoxicity
testing of contact lenses and contact lens care solutions
TC 184
Automation systems and integration
IEC/DIS
62264-3
Enterprise-control system integration — Part 3: Activity models of manufacturing operations management
2015-11-18
2015-11-08
(Revision of IEC 62264-3:2007)
IEC/DIS
62264-5
Enterprise-control system integration — Part 5: Business to manufacturing transactions
TC 204
Intelligent transport systems
ISO/DIS
18495-1.2
2015-11-08
*
TC 210
ISO/DIS
15223-1
Intelligent transport systems — Commercial freight — Automotive visibility in the distribution supply chain — Part 1: Architecture and data definitions
2015-10-18
Quality management and corresponding general aspects for medical
devices
*
Medical devices — Symbols to be used with medical device labels, labelling and information to be supplied — Part 1: General requirements
2015-11-07
(Revision of ISO 15223-1:2012)
TC 211
ISO/DIS 19104
Geographic information/Geomatics
*
Geographic information — Terminology
2015-11-18
(Revision of ISO/TS 19104:2008)
TC 216
ISO/DIS 17708
Footwear
*
Footwear — Test methods for whole shoe — Upper sole adhesion
2016-01-29
(Revision of ISO 17708:2003)
TC 217
ISO/DIS
16128-2
Cosmetics
*
TC 218
ISO/DIS
13061-5
Guidelines on technical definitions and criteria for natural & organic cosmetic ingredients and products — Part 2: Criteria for ingredients and products
2015-11-29
Timber
*
Physical and mechanical properties of wood — Test methods for small clear wood
specimens — Part 5: Determination of strength in compression perpendicular to grain
2015-11-04
(Revision of ISO 3132:1975)
ISO/DIS
13061-10
*
Physical and mechanical properties of wood — Test methods for small clear wood
specimens — Part 10: Determination of impact bending strength
2015-11-04
(Revision of ISO 3348:1975)
ISO/DIS
13061-12
*
Physical and mechanical properties of wood — Test methods for small clear wood
specimens — Part 12: Determination of static hardness
2015-11-04
(Revision of ISO 3350:1975)
ISO/DIS
13061-13
*
Physical and mechanical properties of wood — Test methods for small clear wood
specimens — Part 13: Determination of radial and tangential shrinkage
2015-11-04
(Revision of ISO 4469:1981)
Physical and mechanical properties of wood — Test methods for small clear wood
specimens — Part 14: Determination of volumetric shrinkage
ISO/DIS
13061-14
2015-11-04
(Revision of ISO 4858:1982)
ISO/DIS
13061-17
*
Physical and mechanical properties of wood — Test methods for small clear wood
specimens — Part 17: Determination of ultimate stress in compression parallel to grain
2015-11-04
(Revision of ISO 3787:1976)
TC 219
ISO/DIS 10582
Floor coverings
*
Resilient floor coverings — Specification for heterogeneous vinyl flooring to include
luxury vinyl tile requirements
2015-11-14
(Revision of ISO 10582:2010)
TC 260
ISO/DIS 30400
Human resource management
*
Human resource management — Terminology
2015-11-18
ISO/DIS 30408
*
Human resource management — Guidelines on human governance
2015-11-04
TC 292
ISO/DIS 22325
Security and resilience
*
Societal security — Emergency management — Guidelines for emergency management capability assessment
2015-11-13
JTC 1
ISO/IEC DIS
16512-1
Information technology
*
Information technology — Relayed Multicast Control Protocol (RMCP) — Framework —
Part 1:
2015-11-12
(Revision of ISO/IEC 16512-1:2005)
ISO/IEC DIS
16512-2
*
Information technology — Relayed multicast protocol: Specification for simplex group
applications — Part 2:
2015-11-12
(Revision of ISO/IEC 16512-2:2011)
ISO/IEC DIS
25022.2
*
Systems and software engineering — Systems and software quality requirements and
evaluation (SQuaRE) — Measurement of quality in use
2015-10-04
(Revision of ISO/IEC TR 9126-4:2004)
ISO/IEC DIS
25023.2
*
Systems and software engineering — Systems and software Quality Requirements and
Evaluation (SQuaRE) — Measurement of system and software product quality
2015-10-07
(Revision of ISO/IEC TR 9126-2:2003, ISO/IEC TR 9126-3:2003)
ISO/IEC DIS
26557
*
ISO/IEC
180133:2009/DAmd
3
*
ISO/IEC DIS
18041-4
*
Software and systems engineering — methods and tools for variability mechanisms in
software and systems product line
2015-11-11
Information technology — Personal identification — ISO-compliant driving licence —
Part 3: Access control, authentication and integrity validation — Amendment 3: PACE
2015-11-18
Information technology — Computer graphics, image processing and environmental
data representation — Environmental Data Coding Specification (EDCS) language
bindings — Part 4: C
2015-11-14
(Revision of ISO/IEC 18041-4:2007)
ISO/IEC DIS
10116
*
Information technology — Security techniques — Modes of operation for an n-bit block
cipher
2015-11-18
(Revision of ISO/IEC 10116:2006, ISO/IEC 10116:2006/Cor 1:2008)
ISO/IEC DIS
27009
*
ISO/IEC
230088:2015/DAmd
1
*
ISO/IEC DIS
18000-4
*
Information technology — Security techniques — Sector-specific application of ISO/IEC
27001 — Requirements
Information technology — High efficiency coding and media delivery in heterogeneous
environments — Part 8: Conformance Specification for HEVC — Amendment 1: Conformance testing for Multiview Main and 3D Main Profiles of HEVC
Information technology — Radio frequency identification for item management — Part
4: Parameters for air interface communications at 2,45 GHz
2015-10-27
2015-11-26
2015-11-12
(Revision of ISO/IEC 18000-4:2015)
ISO/IEC DIS
30134-1.2
*
ISO/IEC DIS
30134-2.2
*
ISO/IEC DIS
30134-3.2
*
Information Technology — Data Centres — Key performance indicators — Part 1:
Overview and general requirements
2015-10-04
Information Technology — Data Centres — Key performance indicators — Part 2: Power usage effectiveness (PUE)
2015-10-04
Information Technology — Data Centres — Key Performance Indicators — Part 3: Renewable Energy Factor (REF)
2015-10-04
FDIS circulated
Period from 01 August to 31 August 2015
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 4
ISO/FDIS
21107
Rolling bearings
*
Rolling bearings and spherical plain bearings — Search structure for electronic media
— Characteristics and performance criteria identified by property vocabulary
2015-10-18
(Revision of ISO 21107:2004)
TC 17
ISO/FDIS
4829-2
Steel
*
Steels — Determination of total silicon contents — Reduced molybdosilicate spectrophotometric method — Part 2: Silicon contents between 0,01 % and 0,05 %
2015-10-21
(Revision of ISO 4829-2:1988)
ISO/FDIS 4938
*
Steel and irons — Determination of nickel content — Gravimetric or titrimetric method
2015-10-21
(Revision of ISO 4938:1988)
ISO/FDIS 4939
*
Steel and cast iron — Determination of nickel content — Dimethylglyoxime spectrophotometric method
2015-10-21
(Revision of ISO 4939:1984)
ISO/FDIS 4946
*
Steel and cast iron — Determination of copper content — 2,2'-Diquinolyl spectrophotometric method
2015-10-21
(Revision of ISO 4946:1984)
ISO/FDIS
4991.2
*
Steel castings for pressure purposes
2015-10-13
(Revision of ISO 4991:2005)
ISO/FDIS
14737.2
*
Cast carbon and low alloy steels for general applications
2015-10-13
(Revision of ISO 3755:1991, ISO 14737:2003)
TC 23
Tractors and machinery for agriculture and forestry
ISO/FDIS
17989-1
*
TC 28
ISO/FDIS
10976
Tractors and machinery for agriculture and forestry — Sustainability — Part 1: Principles
2015-10-21
Petroleum products and related products of synthetic or biological
origin
*
Refrigerated light hydrocarbon fluids — Measurement of cargoes on board LNG carriers
2015-10-14
(Revision of ISO 10976:2012)
TC 31
ISO/FDIS
5775-2
Tyres, rims and valves
*
Bicycle tyres and rims — Part 2: Rims
2015-10-26
(Revision of ISO 5775-2:1996, ISO 5775-2:1996/Amd 1:2001)
TC 38
Textiles
ISO/FDIS
18080-1
*
ISO/FDIS
18080-2
*
ISO/FDIS
18080-3
*
ISO/FDIS
18080-4
*
TC 44
ISO/FDIS
9015-2
Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 1:
Test method using corona charging
2015-10-15
Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 2:
Test method using rotary mechanical friction
2015-10-15
Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 3:
Test method using manual friction
2015-10-15
Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 4:
Test method using horizontal mechanical friction
2015-10-15
Welding and allied processes
*
Destructive tests on welds in metallic materials — Hardness testing — Part 2: Microhardness testing of welded joints
2015-10-21
(Revision of ISO 9015-2:2003)
ISO/FDIS
8430-1
*
Resistance spot welding — Electrode holders — Part 1: Taper fixing 1:10
2015-10-28
(Revision of ISO 8430-1:1988)
ISO/FDIS
8430-2
*
Resistance spot welding — Electrode holders — Part 2: Morse taper fixing
2015-10-28
(Revision of ISO 8430-2:1988)
ISO/FDIS
8430-3
*
Resistance spot welding — Electrode holders — Part 3: Parallel shank fixing for end
thrust
2015-10-28
(Revision of ISO 8430-3:1988, ISO 8430-3:1988/Cor 1:1990)
ISO/FDIS
18278-2
*
Resistance welding — Weldability — Part 2: Evaluation procedures for weldability in
spot welding
(Revision of ISO 18278-2:2004)
TC 45
Rubber and rubber products
2015-10-28
ISO/FDIS
4642-1
*
Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 1: Semi-rigid
hoses for fixed systems
2015-10-18
(Revision of ISO 4642-1:2009)
ISO/FDIS
4642-2
*
Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 2: Semi-rigid
hoses (and hose assemblies) for pumps and vehicles
2015-10-18
(Revision of ISO 4642-2:2009)
ISO/FDIS 5774
*
Plastics hoses — Textile-reinforced types for compressed-air applications — Specification
2015-10-21
(Revision of ISO 5774:2006)
ISO/FDIS
11235
*
Rubber compounding ingredients — Sulfenamide accelerators — Test methods
2015-10-28
(Revision of ISO 11235:1999)
ISO/FDIS
6123-2
*
Rubber or plastics covered rollers — Specifications — Part 2: Surface characteristics
2015-10-19
(Revision of ISO 6123-2:1988)
TC 48
ISO/FDIS 384
Laboratory equipment
*
Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments
2015-10-14
(Revision of ISO 384:1978)
TC 58
ISO/FDIS
16148
Gas cylinders
*
Gas cylinders — Refillable seamless steel gas cylinders and tubes — Acoustic emission
examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and
testing
2015-10-28
(Revision of ISO 16148:2006)
TC 92
ISO/FDIS
13344
Fire safety
*
Estimation of the lethal toxic potency of fire effluents
(Revision of ISO 13344:2004)
TC 107
ISO/FDIS
28706-4
Metallic and other inorganic coatings
*
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion —
Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a
cylindrical vessel
2015-10-07
(Revision of ISO 28706-4:2008)
TC 110
Industrial trucks
ISO/FDIS
3691-2
*
ISO/FDIS
22915-1
*
Industrial trucks — Safety requirements and verification — Part 2: Self-propelled variable-reach trucks
2015-10-21
Industrial trucks — Verification of stability — Part 1: General
2015-10-18
(Revision of ISO 22915-1:2008)
TC 111
ISO
3266:2010/FD
Amd 1
Round steel link chains, chain slings, components and accessories
*
2015-10-14
TC 118
ISO 289278:2009/FDAmd
1.2
Compressors and pneumatic tools, machines and equipment
*
TC 121
ISO/FDIS 5360
Forged steel eyebolts grade 4 for general lifting purposes — Amendment 1
Hand-held portable power tools — Test methods for evaluation of vibration emission —
Part 8: Saws, polishing and filing machines with reciprocating action and small saws
with oscillating or rotating action — Amendment 1: Polishing machines, modified feed
forces
2015-10-21
Anaesthetic and respiratory equipment
*
Anaesthetic vaporizers — Agent-specific filling systems
2015-10-07
(Revision of ISO 5360:2012)
ISO/FDIS
7396-1
*
Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum
2015-10-07
(Revision of ISO 7396-1:2007, ISO 7396-1:2007/Amd 1:2010, ISO 7396-1:2007/Amd
2:2010)
TC 122
ISO/FDIS 780
Packaging
*
Packaging — Distribution packaging — Graphical symbols for handling and storage of
packages
2015-10-21
(Revision of ISO 780:1997)
TC 135
ISO/FDIS
18563-3
Non-destructive testing
*
TC 138
ISO/FDIS 9967
Non-destructive testing — Characterization and verification of ultrasonic phased array
equipment — Part 3: Combined systems
2015-10-21
Plastics pipes, fittings and valves for the transport of fluids
*
Thermoplastics pipes — Determination of creep ratio
2015-10-07
(Revision of ISO 9967:2007)
ISO/FDIS 9969
*
Thermoplastics pipes — Determination of ring stiffness
2015-10-07
(Revision of ISO 9969:2007)
TC 142
ISO/FDIS
16891
Cleaning equipment for air and other gases
*
2015-10-07
TC 146
ISO/FDIS
18158
Air quality
*
Workplace air — Terminology
2015-10-19
TC 153
ISO/FDIS
17292
Test methods for evaluating degradation of properties of cleanable filter media
Valves
*
Metal ball valves for petroleum, petrochemical and allied industries
2015-10-07
(Revision of ISO 17292:2004)
TC 164
ISO/FDIS
7500-1
Mechanical testing of metals
*
Metallic materials — Calibration and verification of static uniaxial testing machines —
Part 1: Tension/compression testing machines — Calibration and verification of the
force-measuring system
2015-10-21
(Revision of ISO 7500-1:2004, ISO 7500-1:2004/Cor 1:2008)
ISO/FDIS 7438
*
Metallic materials — Bend test
2015-10-21
(Revision of ISO 7438:2005)
TC 174
ISO/FDIS 8653
Jewellery
*
Jewellery — Ring-sizes — Definition, measurement and designation
2015-10-12
(Revision of ISO 8653:1986)
TC 192
ISO/FDIS
19859
Gas turbines
*
2015-10-18
TC 201
ISO/FDIS
14606
Gas turbine applications — Requirements for power generation
Surface chemical analysis
*
Surface chemical analysis — Sputter depth profiling — Optimization using layered systems as reference materials
2015-10-26
(Revision of ISO 14606:2000)
TC 204
ISO/FDIS
12855
Intelligent transport systems
*
Electronic fee collection — Information exchange between service provision and toll
charging
2015-10-07
(Revision of ISO 12855:2012, ISO 12855:2012/Cor 1:2013)
TC 207
ISO/FDIS
14021
Environmental management
*
Environmental labels and declarations — Self-declared environmental claims (Type II
environmental labelling)
2015-10-28
(Revision of ISO 14021:1999, ISO 14021:1999/Amd 1:2011)
TC 209
ISO/FDIS
14644-1
Cleanrooms and associated controlled environments
*
Cleanrooms and associated controlled environments — Part 1: Classification of air
cleanliness by particle concentration
2015-10-28
(Revision of ISO 14644-1:1999)
ISO/FDIS
14644-2
*
Cleanrooms and associated controlled environments — Part 2: Monitoring to provide
evidence of cleanroom performance related to air cleanliness by particle concentration
(Revision of ISO 14644-2:2000)
TC 211
ISO/FDIS
Geographic information/Geomatics
*
Geographic information — Rules for application schema
2015-10-28
19109
2015-10-21
(Revision of ISO 19109:2005)
TC 213
ISO/FDIS
16610-32
Dimensional and geometrical product specifications and verification
*
Geometrical product specifications (GPS) — Filtration — Part 32: Robust profile filters:
Spline filters
2015-10-07
(Revision of ISO/TS 16610-32:2009)
TC 215
Health informatics
ISO/IEEE FDIS
11073-10424
*
ISO/IEEE FDIS
11073-10425
*
ISO/IEEE FDIS
11073-20601
*
Health informatics — Personal health device communication — Part 10424: Device
Specialization— — Sleep Apnoea Breathing Therapy Equipment (SABTE)
2016-01-21
Health informatics — Personal health device communication — Part 10425: Device
specialization — Continuous glucose monitor (CGM)
2016-01-21
Health informatics — Personal health device communication — Part 20601: Application
profile — Optimized exchange protocol
2016-01-21
(Revision of ISO/IEEE 11073-20601:2010, ISO/IEEE 11073-20601:2010/Amd 1:2015)
TC 221
ISO/FDIS
18325
Geosynthetics
*
TC 238
ISO/FDIS
17831-2
Geosynthetics — Test method for the determination of water discharge capacity for
prefabricated vertical drains
2015-10-18
Solid biofuels
*
JTC 1
Solid biofuels — Determination of mechanical durability of pellets and briquettes — Part
2: Briquettes
2015-10-28
Information technology
ISO/IEC FDIS
25185-1
*
ISO/IEC/IEEE
FDIS 8802-1Q
*
ISO/IEC FDIS
15026-3
*
Identification cards — Integrated circuit card authentication protocols — Part 1: Protocol for Lightweight Authentication of Identity
Information technology — Telecommunications and information exchange between
systems — Local and metropolitan area networks — Specific requirements — Part 1Q:
Bridges and Bridged Networks
Systems and software engineering — Systems and software assurance — Part 3: System integrity levels
2015-10-13
2016-01-29
2015-10-19
(Revision of ISO/IEC 15026-3:2011)
ISO/IEC FDIS
26550
*
Software and systems engineering — Reference model for product line engineering and
management
2015-10-18
(Revision of ISO/IEC 26550:2013)
ISO/IEC FDIS
26555
*
Software and systems engineering — Tools and methods for product line technical
management
2015-10-18
(Revision of ISO/IEC 26555:2013)
ISO/IEC FDIS
27013
*
Information technology — Security techniques — Guidance on the integrated implementation of ISO/IEC 27001 and ISO/IEC 20000-1
2015-10-05
(Revision of ISO/IEC 27013:2012)
ISO/IEC
144964:2004/FDAmd
43
*
ISO/IEC
144965:2001/FDAmd
36
*
ISO/IEC
144965:2001/FDAmd
37
*
Information technology — Coding of audio-visual objects — Part 4: Conformance testing — Amendment 43: 3D-AVC conformance testing
2015-10-18
Information technology — Coding of audio-visual objects — Part 5: Reference software
— Amendment 36: Pattern-based 3D mesh coding reference software
2015-10-12
Information technology — Coding of audio-visual objects — Part 5: Reference software
— Amendment 37: New Levels for the AAC Profiles, uniDRC support, AAC block length
parameter corrections
2015-10-18
Standards published
New International Standards published between 01 August and 31 August 2015
* Available in English only
** French version of standard previously published in English only
Price group
TC 17
ISO
19272:2015
Steel
*
Low alloyed steel — Determination of C, Si, Mn, P, S, Cr, Ni, Al, Ti and Cu - Glow discharge optical emission spectrometry (routine method)
E
Steel — Etching method for macroscopic examination
ISO 4969:2015
B
TC 20
ISO 9940:2015
Aircraft and space vehicles
*
ISO
18423:2015
*
ISO
20104:2015
*
ISO
20105:2015
*
Aerospace series — Fluid, hydraulic, phosphate ester-base, fire resistant — Technical
specification
E
Space data and information transfer systems — Pseudo-Noise (PN) Ranging Systems
E
Space data and information transfer systems — Producer-Archive Interface Specification (PAIS)
H
Space data and information transfer systems — Operation of CFDP over encapsulation
service
C
ISO
20106:2015
*
ISO
20107:2015
*
ISO
20205:2015
*
ISO
20206:2015
*
ISO
20207:2015
*
ISO
20208:2015
*
ISO
20210:2015
*
ISO
20211:2015
*
ISO
20213:2015
*
ISO
20214:2015
*
ISO
20215:2015
*
ISO
20216:2015
*
ISO
20217:2015
*
ISO
21459:2015
*
ISO
21460:2015
*
ISO
22663:2015
*
Space data and information transfer systems — Mission operations common object
model
G
Space data and information transfer systems — Spacecraft onboard interface services
— Device virtualization service
D
Space data and information transfer systems — Spacecraft Onboard Interface Systems
— Low Data-Rate Wireless Communications for Spacecraft Monitoring and Control
E
Space data and information transfer systems — IP over CCSDS space links
D
Space data and information transfer systems — CCSDS Space Link Protocols over
ETSI DVB-S2 Standard
D
Space data and information transfer systems — Delta-DOR Raw Data Exchange Format
F
Space data and information transfer systems — Mission Operations Message Abstraction Layer - JAVA API
H
Space data and information transfer systems — Spacecraft Onboard Interface Services
— Device Access Service
D
Space data and information transfer systems — Spacecraft onboard interface services
— Message transfer service
E
Space data and information transfer systems — Security architecture for space data
systems
F
Space data and information transfer systems — CCSDS cryptographic algorithms
D
Space data and information transfer systems — Spacecraft onboard interface services
— Device data pooling service
E
Space data and information transfer systems — Spacecraft onboard interface services
— File and packet store services
H
Space data and information transfer systems — Proximity-1 space link protocol — Coding and synchronization sublayer
F
Space data and information transfer systems — Proximity-1 space link protocol —
Physical layer
E
Space data and information transfer systems — Proximity-1 space link protocol — Data
link layer
H
TC 22
Road vehicles
ISO 3006:2015
Road vehicles — Passenger car wheels for road use — Test methods
B
Road vehicles — Wheels/rims for commercial vehicles — Test methods
ISO 3894:2015
B
Diesel engines — Fuel injection pumps and fuel injector low-pressure connections —
Part 1: Threaded connections
B
ISO 178401:2015
Road vehicles — Information for first and second responders — Part 1: Rescue sheet
for passenger cars and light commercial vehicles
D
TC 23
Tractors and machinery for agriculture and forestry
ISO 139481:2015
ISO 7893:2015
*
*
Agricultural tractors — Test procedures — Part 3: Turning and clearance diameters
B
Portable chain-saws — Chain brake performance
ISO 6535:2015
A
ISO/TS
19858:2015
*
TC 29
ISO/TS 13399202:2015
Forestry machines — Portable chain-saws — Test method for evaluating saw chain oil
lubricity
B
Small tools
*
Cutting tool data representation and exchange — Part 202: Creation and exchange of
3D models — Irregular inserts
TC 34
Food products
ISO
11085:2015
Cereals, cereals-based products and animal feeding stuffs — Determination of crude fat
and total fat content by the Randall extraction method
ISO
17604:2015
*
ISO
17780:2015
*
ISO 183631:2015
*
F
C
Microbiology of the food chain — Carcass sampling for microbiological analysis
C
Animal and vegetable fats and oils — Determination of aliphatic hydrocarbons in vegetable oils
Animal and vegetable fats and oils — Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS — Part 1: Method using fast alkaline transesterification and measurement for 3-MCPD and differential measurement for glycidol
ISO
16779:2015
Sensory analysis — Assessment (determination and verification) of the shelf life of
foodstuffs
TC 35
Paints and varnishes
ISO 8623:2015
Tall-oil fatty acids for paints and varnishes — Test methods and characteristic values
E
B
B
B
TC 38
Textiles
ISO/TS
17920:2015
*
ISO/TS
19336:2015
*
TC 39
Fibre ropes for offshore stationkeeping — Aramid
F
Fibre ropes for offshore station keeping — Polyarylate
F
Machine tools
ISO
18217:2015
Safety of woodworking machines — Edge-banding machines fed by chain(s)
TC 42
Photography
ISO
18383:2015
F
*
Photography — Digital cameras — Specification guideline
G
TC 44
Welding and allied processes
ISO 6848:2015
Arc welding and cutting — Nonconsumable tungsten electrodes — Classification
B
TC 45
Rubber and rubber products
ISO 34-1:2015
Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces
C
Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small
(Delft) test pieces
B
Rubber and plastics — Analysis of multi-peak traces obtained in determinations of tear
strength and adhesion strength
A
ISO 34-2:2015
ISO 6133:2015
ISO 249:2014
*
Rubber, raw natural — Determination of dirt content
B
ISO
15825:2015
ISO 61231:2015
*
ISO 7229:2015
*
Rubber compounding ingredients — Carbon black — Determination of aggregate size
distribution by disc centrifuge photosedimentometry
B
Rubber or plastics covered rollers — Specifications — Part 1: Requirements for hardness
A
Rubber- or plastics-coated fabrics — Measurement of gas permeability
C
TC 58
Gas cylinders
ISO
17871:2015
Gas cylinders — Quick-release cylinder valves — Specification and type testing
TC 59
Buildings and civil engineering works
B
ISO
11618:2015
*
ISO 159281:2015
*
ISO 159282:2015
*
ISO 159283:2015
*
TC 60
Buildings and Civil Engineering Works — Sealants — Classification and requirements
for pedestrian walkway sealants
B
Houses — Description of performance — Part 1: Structural safety
C
Houses — Description of performance — Part 2: Structural serviceability
C
Houses — Description of performance — Part 3: Structural durability
C
Gears
ISO/TR
10828:2015
*
Worm gears — Worm profiles and gear mesh geometry
H
TC 61
Plastics
ISO 113577:2015
Plastics — Differential scanning calorimetry (DSC) — Part 7: Determination of crystallization kinetics
B
ISO 220072:2015
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method
D
ISO
16616:2015
*
ISO 190951:2015
*
ISO 190952:2015
*
ISO 190953:2015
*
ISO 190954:2015
*
C
TC 67
Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 1: Guidelines for the approach
A
Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 2: Test specimens
B
Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 3: Test methods
C
Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 4: Environmental conditions for durability
C
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 151561:2015
*
ISO 151562:2015
*
ISO 151563:2015
*
TC 68
ISO 4217:2015
Test methods for natural fibre-reinforced plastic composite (NFC) deck boards
Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 1: General principles for selection of crackingresistant materials
B
Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy
steels, and the use of cast irons
F
Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant
alloys) and other alloys
H
Financial services
*
Codes for the representation of currencies
A
TC 70
Internal combustion engines
ISO 81788:2015
Reciprocating internal combustion engines — Exhaust emission measurement — Part
8: Engine group determination
TC 76
Transfusion, infusion and injection, and blood processing equipment for
medical and pharmaceutical use
ISO 139262:2011/Amd
1:2015
*
Pen systems — Part 2: Plunger stoppers for pen-injectors for medical use — Amendment 1
TC 83
Sports and other recreational facilities and equipment
ISO/TR
Sports and other recreational facilities and equipment — Injury and safety definitions
A
XZ
20183:2015
and thresholds — Guidelines for their inclusion in standards
A
ISO
11110:2015
Winter-sports equipment — Test devices for the setting of the functional unit
ski/boot/binding — Requirements and tests
B
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO 127494:2015
*
TC 92
ISO
19702:2015
Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part
4: Dosimetry for radiation processing
E
Fire safety
Guidance for sampling and analysis of toxic gases and vapours in fire effluents using
Fourier Transform Infrared (FTIR) spectroscopy
G
ISO/TR 246793:2015
Fire safety engineering — Performance of structure in fire — Part 3: Example of an
open car park
F
TC 100
Chains and chain sprockets for power transmission and conveyors
ISO 606:2015
*
*
TC 102
*
ISO/TR
18230:2015
*
ISO 3271:2015
*
Iron ores — Determination of loss on ignition — Non-oxidised ores
B
*
*
ISO 46962:2015
*
ISO 4700:2015
*
ISO 7992:2015
Iron ores — Sampling of slurries
E
ISO 46961:2015
ISO 7215:2015
E
Iron ore and direct reduced iron
ISO
16742:2014
ISO 4695:2015
Short-pitch transmission precision roller and bush chains, attachments and associated
chain sprockets
*
*
Iron ores for blast furnace and direct reduction feedstocks — Determination of the tumble and abrasion indices
A
Iron ores for blast furnace feedstocks — Determination of the reducibility by the rate of
reduction index
B
Iron ores for blast furnace feedstocks — Determination of low-temperature reductiondisintegration indices by static method — Part 1: Reduction with CO, CO2, H2 and N2
B
Iron ores for blast furnace feedstocks — Determination of low-temperature reductiondisintegration indices by static method — Part 2: Reduction with CO and N2
B
Iron ore pellets for blast furnace and direct reduction feedstocks — Determination of the
crushing strength
A
Iron ores for blast furnace feedstocks — Determination of the reducibility by the final
degree of reduction index
B
Iron ores for blast furnace feedstocks — Determination of reduction under load
B
ISO 8371:2015
*
Iron ores for blast furnace feedstocks — Determination of the decrepitation index
A
ISO
*
Iron ore pellets for shaft direct-reduction feedstocks — Determination of the clustering
11256:2015
ISO
11257:2015
*
ISO
11258:2015
*
ISO
13930:2015
*
index
C
Iron ores for shaft direct-reduction feedstocks — Determination of the low-temperature
reduction-disintegration index and degree of metallization
B
Iron ores for shaft direct-reduction feedstocks — Determination of the reducibility index,
final degree of reduction and degree of metallization
C
Iron ores for blast furnace feedstocks — Determination of low-temperature reductiondisintegration indices by dynamic method
B
TC 106
Dentistry
ISO 6874:2015
Dentistry — Polymer-based pit and fissure sealants
B
ISO 36303:2015
Dentistry — Endodontic instruments — Part 3: Compactors: pluggers and spreaders
ISO 133975:2015
Dentistry — Periodontal curettes, dental scalers and excavators — Part 5: Jacquette
scalers
ISO
16408:2015
Dentistry — Oral care products — Oral rinses
TC 110
Industrial trucks
ISO 2291524:2015
B
B
*
TC 113
ISO/TR
11651:2015
Industrial trucks — Verification of stability — Part 24: Slewing variable-reach roughterrain trucks
C
Hydrometry
*
Estimation of sediment deposition in reservoirs using one dimensional simulation models
TC 118
Compressors and pneumatic tools, machines and equipment
ISO 289275:2009/Amd
1:2015
Hand-held portable power tools — Test methods for evaluation of vibration emission —
Part 5: Drills and impact drills — Amendment 1: Feed force
TC 126
Tobacco and tobacco products
ISO/TR 194782:2015
A
*
TC 130
ISO and Health Canada intense smoking parameters — Part 2: Examination of factors
contributing to variability in the routine measurement of TPM, water and NFDPM smoke
yields of cigarettes
E
XZ
G
Graphic technology
ISO
14861:2015
*
ISO/PAS
15339-1:2015
*
ISO/PAS
15339-2:2015
*
Graphic technology — Requirements for colour soft proofing systems
B
Graphic technology — Printing from digital data across multiple technologies — Part 1:
Principles
C
Graphic technology — Printing from digital data across multiple technologies — Part 2:
Characterized reference printing conditions, CRPC1-CRPC7
B
TC 131
ISO 199731:2015
Fluid power systems
*
ISO 60202:2015
ISO 60203:2015
*
ISO 6432:2015
*
Pneumatic fluid power — Assessment of component reliability by testing — Part 1:
General procedures
F
Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar)
series — Part 2: Compact series
D
Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar)
series — Part 3: Compact series with bores from 250 mm to 500 mm
C
Pneumatic fluid power — Single rod cylinders, 1 000 kPa (10 bar) series, bores from 8
mm to 25 mm — Basic and mounting dimensions
A
TC 135
Non-destructive testing
ISO 99341:2015
Non-destructive testing — Magnetic particle testing — Part 1: General principles
ISO 99342:2015
Non-destructive testing — Magnetic particle testing — Part 2: Detection media
ISO 99343:2015
Non-destructive testing — Magnetic particle testing — Part 3: Equipment
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO
18488:2015
C
D
B
*
TC 146
ISO
17211:2015
*
Stationary source emissions — Sampling and determination of selenium compounds in
flue gas
D
Water quality
*
TC 149
Water quality — Determination of polychlorinated naphthalenes (PCN) — Method using
gas chromatography (GC) and mass spectrometry (MS)
F
Cycles
ISO 42102:2015
*
ISO 42106:2015
*
Cycles — Safety requirements for bicycles — Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles
E
Cycles — Safety requirements for bicycles — Part 6: Frame and fork test methods
D
TC 155
Nickel and nickel alloys
ISO 75301:2015
Nickel alloys — Flame atomic absorption spectrometric analysis — Part 1: Determination of cobalt, chromium, copper, iron and manganese
TC 156
Corrosion of metals and alloys
ISO 8044:2015
B
Air quality
TC 147
ISO/TS
16780:2015
Polyethylene (PE) materials for piping systems — Determination of Strain Hardening
Modulus in relation to slow crack growth — Test method
*
D
Corrosion of metals and alloys — Basic terms and definitions
A
TC 158
Analysis of gases
ISO 61421:2015
Gas analysis — Preparation of calibration gas mixtures — Part 1: Gravimetric method
for Class I mixtures
TC 159
Ergonomics
ISO 72503:2015
*
ISO 206852:2015
*
TC 161
ISO 235519:2015
Basic human body measurements for technological design — Part 3: Worldwide and
regional design ranges for use in product standards
Ergonomics — 3-D scanning methodologies for internationally compatible anthropometric databases — Part 2: Evaluation protocol of surface shape and repeatability of relative landmark positions
*
Safety and control devices for gas burners and gas-burning appliances — Particular
requirements — Part 9: Mechanical gas thermostats
Thermal performance and energy use in the built environment
ISO 9972:2015
Thermal performance of buildings — Determination of air permeability of buildings —
Fan pressurization method
TC 165
D
D
D
Timber structures
*
Timber structures — Structural classification for sawn timber
D
TC 171
ISO
18565:2015
E
Control and protective devices for gas and/or oil burners and appliances
TC 163
ISO
16598:2015
F
Document management applications
*
Document management — AFP/Archive
E
TC 172
Optics and photonics
ISO
16671:2015
Ophthalmic implants — Irrigating solutions for ophthalmic surgery
ISO
16672:2015
Ophthalmic implants — Ocular endotamponades
TC 173
Assistive products for persons with disability
ISO 71768:2014
Wheelchairs — Part 8: Requirements and test methods for static, impact and fatigue
strengths
G
ISO 168403:2014
Wheelchair seating — Part 3: Determination of static, impact and repetitive load
strengths for postural support devices
E
TC 189
Ceramic tile
D
C
ISO 130075:2015
*
ISO/TR 178701:2015
*
ISO/TR 17870-
*
Ceramic tiles — Grouts and adhesives — Part 5: Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives
Ceramic tiles — Guidelines for installation — Part 1: Installation of ceramic wall and
floor tiles
Ceramic tiles — Guidelines for installation — Part 2: Installation of thin ceramic wall and
D
D
2:2015
floor tiles and panels
TC 190
Soil quality
ISO 165581:2015
Soil quality — Risk-based petroleum hydrocarbons — Part 1: Determination of aliphatic
and aromatic fractions of volatile petroleum hydrocarbons using gas chromatography
(static headspace method)
C
ISO/TS 165582:2015
Soil quality — Risk-based petroleum hydrocarbons — Part 2: Determination of aliphatic
and aromatic fractions of semi-volatile petroleum hydrocarbons using gas chromatography with flame ionization detection (GC/FID)
D
TC 195
Building construction machinery and equipment
ISO 218731:2015
*
TC 201
ISO
13083:2015
Building construction machinery and equipment — Mobile crushers — Part 1: Terminology and commercial specifications
*
Surface chemical analysis — Scanning probe microscopy — Standards on the definition
and calibration of spatial resolution of electrical scanning probe microscopes (ESPMs)
such as SSRM and SCM for 2D-dopant imaging and other purposes
C
Intelligent transport systems
ISO/TR
16786:2015
*
ISO/TR 174652:2015
*
ISO/TR 174653:2015
*
Intelligent transport systems — The use of simulation models for evaluation of traffic
management systems — Input parameters and reporting template for simulation of
traffic signal control systems
B
Intelligent transport systems — Cooperative ITS — Part 3: Release procedures for
standards documents
A
Fine ceramics
ISO
15733:2015
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure —
Determination of tensile properties
*
TC 211
C
Intelligent transport systems — Cooperative ITS — Part 2: Guidelines for standards
documents
TC 206
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for
thermal fatigue of fine ceramics substrate
B
C
Geographic information/Geomatics
ISO 191362:2015
*
ISO
19162:2015
*
Geographic information — Geography Markup Language (GML) — Part 2: Extended
schemas and encoding rules
G
Geographic information — Well-known text representation of coordinate reference systems
H
TC 213
Dimensional and geometrical product specifications and verification
ISO 142535:2015
Geometrical product specifications (GPS) — Inspection by measurement of workpieces
and measuring equipment — Part 5: Uncertainty in verification testing of indicating
measuring instruments
TC 215
Health informatics
ISO/TR
17522:2015
D
Surface chemical analysis
TC 204
ISO
17841:2015
D
*
C
Health informatics — Provisions for health applications on mobile/smart devices
C
ISO/TS 220772:2015
*
F
TC 221
ISO 256192:2015
Geosynthetics
*
TC 224
ISO
24518:2015
*
*
*
D
Aluminium oxide primarily used for the production of aluminium — Method for the determination of tapped and untapped density
B
Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots
C
Fisheries and aquaculture
*
TC 238
ISO 181341:2015
Activities relating to drinking water and wastewater services — Crisis management of
water utilities
Nanotechnologies
TC 234
ISO
18538:2015
B
Materials for the production of primary aluminium
TC 229
ISO/TS
17466:2015
Geosynthetics — Determination of compression behaviour — Part 2: Determination of
short-term compression behaviour
Service activities relating to drinking water supply systems and
wastewater systems - Quality criteria of the service and performance
indicators
TC 226
ISO
18842:2015
Health informatics — Medical waveform format — Part 2: Electrocardiography
Traceability of molluscan products — Specifications on the information to be recorded in
farmed molluscan distribution chains
F
Solid biofuels
*
TC 251
Solid biofuels — Determination of moisture content — Oven dry method — Part 1: Total
moisture — Reference method
A
Asset management
ISO
55000:2014
*
ISO
55002:2014
*
Asset management — Overview, principles and terminology
D
TC 256
Asset management — Management systems — Guidelines for the application of ISO
55001
E
Pigments, dyestuffs and extenders
ISO 184731:2015
*
ISO 184732:2015
*
Functional pigments and extenders for special applications — Part 1: Nanoscale calcium carbonate for sealant application
A
Functional pigments and extenders for special applications — Part 2: Nanoscale titanium dioxide for sunscreen application
A
TC 257
Evaluation of energy savings
ISO
17742:2015
Energy efficiency and savings calculation for countries, regions and cities
TC 266
Biomimetics
G
ISO
18458:2015
Biomimetics — Terminology, concepts and methodology
ISO
18459:2015
Biomimetics — Biomimetic structural optimization
TC 282
Water re-use
ISO 160751:2015
Guidelines for treated wastewater use for irrigation projects — Part 1: The basis of a
reuse project for irrigation
E
ISO 160752:2015
Guidelines for treated wastewater use for irrigation projects — Part 2: Development of
the project
D
ISO 160753:2015
Guidelines for treated wastewater use for irrigation projects — Part 3: Components of a
reuse project for irrigation
F
IULTCS
International Union of Leather Technologists and Chemists Societies
ISO 3379:2015
Leather — Determination of distension and strength of surface (Ball burst method)
D
D
A
ISO 3380:2015
*
ISO
17235:2015
*
ISO
19074:2015
*
Leather — Physical and mechanical tests — Determination of shrinkage temperature up
to 100 °C
A
Leather — Physical and mechanical tests — Determination of softness
A
JTC 1
Leather — Physical and mechanical tests — Determination of water absorption by capillary action (wicking)
A
Information technology
ISO/IEC/IEEE
880211:2012/Amd
4:2015
*
ISO/IEC/IEEE
880211:2012/Amd
5:2015
*
ISO/IEC TR
19446:2015
*
ISO/IEC
11770-3:2015
*
ISO/IEC
27033-1:2015
*
ISO/IEC
29190:2015
*
ISO/IEC
28360:2015
*
Information technology — Telecommunications and information exchange between
systems — Local and metropolitan area networks — Specific requirements — Part 11:
Wireless LAN medium access control (MAC) and physical layer (PHY) specifications —
Amendment 4
Information technology — Telecommunications and information exchange between
systems — Local and metropolitan area networks — Specific requirements — Part 11:
Wireless LAN medium access control (MAC) and physical layer (PHY) specifications —
Amendment 5
H
H
Differences between the driving licences based on the ISO/IEC 18013 series and the
European Union specifications
D
Information technology — Security techniques — Key management — Part 3: Mechanisms using asymmetric techniques
H
Information technology — Security techniques — Network security — Part 1: Overview
and concepts
F
Information technology — Security techniques — Privacy capability assessment model
C
Information technology — Office equipment — Determination of chemical emission
rates from electronic equipment
F
ISO/IEC
144963:2009/Amd
5:2015
*
ISO/IEC
144965:2001/Amd
32:2015
*
ISO/IEC
144965:2001/Amd
35:2015
*
ISO/IEC
15938-13:2015
*
ISO/IEC
230031:2007/Amd
1:2008/Cor
3:2015
*
ISO/IEC
230033:2012/Cor
4:2015
*
ISO/IEC
29170-2:2015
*
ISO/IEC
15426-2:2015
*
ISO/IEC
16480:2015
*
ISO/IEC
11179-6:2015
*
ISO/IEC
19763-5:2015
*
ISO/IEC
19763-6:2015
*
ISO/IEC
19785-1:2015
*
ISO/IEC TR
29196:2015
*
Information technology — Coding of audio-visual objects — Part 3: Audio — Amendment 5: Support for Dynamic Range Control, New Levels for ALS Simple Profile, and
Audio Synchronization
D
Information technology — Coding of audio-visual objects — Part 5: Reference software
— Amendment 32: Reference software for multi-resolution 3D mesh compression
XZ
Information technology — Coding of audio-visual objects — Part 5: Reference software
— Amendment 35: 3D-AVC Reference software
XZ
Information technology — Multimedia content description interface — Part 13: Compact
descriptors for visual search
H
Information technology — MPEG audio technologies — Part 1: MPEG Surround —
Amendment 1: Conformance testing — Technical Corrigendum 3
free
Information technology — MPEG audio technologies — Part 3: Unified speech and
audio coding — Technical Corrigendum 4
free
Information technology — Advanced image coding and evaluation — Part 2: Evaluation
procedure for nearly lossless coding
D
Information technology — Automatic identification and data capture techniques — Bar
code verifier conformance specification — Part 2: Two-dimensional symbols
C
Information technology — Automatic identification and data capture techniques —
Reading and display of ORM by mobile devices
C
Information technology — Metadata registries (MDR) — Part 6: Registration
G
Information technology — Metamodel framework for interoperability (MFI)
Part 5: Metamodel for process model registration
—
Information technology — Metamodel framework for interoperability (MFI)
Part 6: Registry Summary
—
E
Information technology — Common Biometric Exchange Formats Framework — Part 1:
Data element specification
D
F
Guidance for biometric enrolment
F
Standards confirmed
The following International Standards are confimred for a five year period:
TC 8
Ships and marine technology
ISO 6454:1984
(reconfirmed)
TC 10
Technical product documentation
ISO 6412-1:1989
(reconfirmed)
ISO 6412-2:1989
(reconfirmed)
ISO 6412-3:1993
(reconfirmed)
ISO 15519-1:2010
TC 20
Aircraft and space vehicles
ISO 3161:1999
(reconfirmed)
ISO 5855-1:1999
(reconfirmed)
ISO 5855-2:1999
(reconfirmed)
ISO 5855-3:1999
(reconfirmed)
ISO 5858:1999
(reconfirmed)
ISO 7913:1994
(reconfirmed)
ISO 7961:1994
(reconfirmed)
ISO 8280:1993
(reconfirmed)
ISO 8538:1999
(reconfirmed)
ISO 9254:1993
(reconfirmed)
ISO 9256:1993
(reconfirmed)
ISO 12278:1999
(reconfirmed)
ISO 12280:1999
(reconfirmed)
ISO 12281:1999
(reconfirmed)
ISO 17057:1999
(reconfirmed)
TC 22
Road vehicles
ISO 8820-10:2015
ISO 21069-1:2004
(reconfirmed)
ISO 21069-2:2008
TC 23
Tractors and machinery for agriculture and forestry
ISO 500-2:2004
(reconfirmed)
ISO 730:2009
ISO 2332:2009
ISO 5692-1:2004
(reconfirmed)
ISO 5692-2:2002
(reconfirmed)
ISO 6489-2:2002
(reconfirmed)
ISO 6489-4:2004
(reconfirmed)
ISO 11001-3:2009
ISO 17612:2004
(reconfirmed)
ISO 17900:2002
(reconfirmed)
TC 37
Terminology and other language and content resources
ISO 12616:2002
(reconfirmed)
TC 41
Pulleys and belts (including veebelts)
ISO 9981:1998
(reconfirmed)
ISO 9982:1998
(reconfirmed)
ISO 7590:2009
TC 46
Information and documentation
ISO 2146:2010
ISO 10754:1996
(reconfirmed)
TC 61
Plastics
ISO 1926:2009
ISO 4897:1985
(reconfirmed)
ISO 4898:2010
ISO 11339:2010
ISO 12017:1995
(reconfirmed)
ISO 15105-1:2007
(reconfirmed)
ISO 15166-2:2000
(reconfirmed)
ISO 15605:2000
(reconfirmed)
ISO 17194:2007
(reconfirmed)
ISO 15064:2010
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 13626:2003
(reconfirmed)
TC 86
Refrigeration and air-conditioning
ISO 13261-1:1998
(reconfirmed)
ISO 13261-2:1998
(reconfirmed)
TC 91
Surface active agents
ISO 8022:1990
(reconfirmed)
TC 92
Fire safety
ISO 834-1:1999
(reconfirmed)
ISO 6944-2:2009
ISO 12472:2003
(reconfirmed)
TC 96
Cranes
ISO 12485:1998
(reconfirmed)
TC 105
Steel wire ropes
ISO 2232:1990
(reconfirmed)
ISO 6984:1990
(reconfirmed)
TC 108
Mechanical vibration, shock and condition monitoring
ISO 5347-8:1993
(reconfirmed)
ISO 5347-17:1993
(reconfirmed)
ISO 10817-1:1998
(reconfirmed)
ISO 1606311:1999
(reconfirmed)
ISO 1606315:2006
(reconfirmed)
TC 119
Powder metallurgy
ISO 3995:1985
(reconfirmed)
TC 131
Fluid power systems
ISO 8434-6:2009
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO 17455:2005
(reconfirmed)
TC 159
Ergonomics
ISO 9355-1:1999
(reconfirmed)
ISO 9355-2:1999
(reconfirmed)
ISO 9355-3:2006
(reconfirmed)
TC 171
Document management applications
ISO 6196-1:1993
(reconfirmed)
ISO 6196-2:1993
(reconfirmed)
ISO 6196-4:1998
(reconfirmed)
ISO 6196-8:1998
(reconfirmed)
TC 182
Geotechnics
ISO/TS 178927:2004
ISO/TS 178928:2004
ISO/TS 1789210:2004
ISO/TS 1789211:2004
ISO/TS 1789212:2004
TC 184
Automation systems and integration
ISO/TS 159266:2013
TC 189
Ceramic tile
ISO 10545-5:1996
(reconfirmed)
ISO 10545-6:2010
TC 204
Intelligent transport systems
ISO 15662:2006
TC 212
Clinical laboratory testing and in vitro diagnostic test systems
ISO 18113-1:2009
ISO 18113-2:2009
ISO 18113-3:2009
ISO 18113-4:2009
ISO 18113-5:2009
TC 213
Dimensional and geometrical product specifications and verification
ISO 10360-2:2009
ISO 14978:2006
(reconfirmed)
ISO/TS 155304:2008
(reconfirmed)
CASCO
Committee on conformity assessment
ISO/IEC
17043:2010
JTC 1
Information technology
ISO/IEC 88256:2008
ISO/IEC
11582:2002
(reconfirmed)
ISO/IEC 144763:2008
ISO/IEC
14844:2003
(reconfirmed)
ISO/IEC
15050:2003
(reconfirmed)
ISO/IEC
15431:2003
(reconfirmed)
ISO/IEC
15433:2003
(reconfirmed)
ISO/IEC
15505:2003
(reconfirmed)
ISO/IEC 116932:2009
ISO/IEC 97985:2009
ISO/IEC 138881:2009
ISO/IEC 138883:2009
ISO/IEC 154081:2009
ISO/IEC 180142:2009
ISO/IEC 180143:2009
ISO/IEC
19792:2009
ISO/IEC TR
20004:2012
ISO/IEC 144962:2004
(reconfirmed)
ISO/IEC 1449627:2009
Standards withdrawn
Period from 01 August to 31 August 2015
TC 158
Analysis of gases
ISO 6142:2001
(replaced by ISO 6142-1:2015)
ISO
6142:2001/Amd
1:2009
(replaced by ISO 6142-1:2015)
TC 215
Health informatics
ISO/TR
22790:2007
(replaced by )
Meeting calendar
(update at 01 August 2015)
Meetings called for the month of July are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
August-September 2015
31-4
Sapporo (Japan)
JTC 1/SC 35
Information technology/User interfaces
September 2015
4
Washington, D.C
(USA)
TC 84
Devices for administration of medicinal products and catheters
4-12
New Delhi (India)
TC 207
Environmental management
4-12
New Delhi (India)
TC 207/SC 4
Environmental management/Environmental performance evaluation
4-12
New Delhi (India)
TC 207/SC 7
Environmental management/Greenhouse gas management and related activities
7
Teddington
(United Kingdom)
TC 164/SC 2
Mechanical testing of metals/Ductility testing
7-11
Sydney (Australia)
TC 96/SC 9
Cranes/Bridge and gantry cranes
7-11
Tokyo (Japan)
TC 133
Clothing sizing systems - size designation, size measurement methods and digital fittings
7-11
Teddington
(United Kingdom)
TC 164
Mechanical testing of metals
7-14
Sydney (Australia)
TC 96
Cranes
8
Sydney (Australia)
TC 96/SC 3
Cranes/Selection of wire ropes
8
Sydney (Australia)
TC 96/SC 10
Cranes/Design principles and requirements
8-10
Teddington
(United Kingdom)
TC 164/SC 5
Mechanical testing of metals/Fatigue testing
9
Sydney (Australia)
TC 96/SC 5
Cranes/Use, operation and maintenance
9
Sydney (Australia)
TC 96/SC 8
Cranes/Jib cranes
9
Teddington
(United King-
TC 164/SC 1
Mechanical testing of metals/Uniaxial testing
dom)
9
Teddington
(United Kingdom)
TC 164/SC 4
Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)
10
Sydney (Australia)
TC 96/SC 2
Cranes/Terminology
10
Sydney (Australia)
TC 96/SC 4
Cranes/Test methods
10
Sydney (Australia)
TC 96/SC 6
Cranes/Mobile cranes
10
Teddington
(United Kingdom)
TC 164/SC 3
Mechanical testing of metals/Hardness testing
10
New Delhi (India)
TC 207/SC 1
Environmental management/Environmental management systems
10
New Delhi (India)
TC 207/SC 3
Environmental management/Environmental labelling
10-11
Oslo (Norway)
TC 265
Carbon dioxide capture, transportation, and geological storage
11
Milan (Italy)
JTC 1/SC 25
Information technology/Interconnection of information technology equipment
11
Sydney (Australia)
TC 96/SC 7
Cranes/Tower cranes
11
Courbevoie,
Paris (France)
TC 153
Valves
11
New Delhi (India)
TC 207/SC 2
Environmental management/Environmental auditing and related environmental investigations
11
New Delhi (India)
TC 207/SC 5
Environmental management/Life cycle assessment
13
Seoul (Korea,
Republic of)
President's
committee
President's committee
13
Seattle (USA)
TC 201/SC 6
Surface chemical analysis/Secondary ion mass spectrometry
14
Seoul (Korea,
Republic of)
COUNCIL
Council
14
Berlin (Germany)
TC 150/SC 1
Implants for surgery/Materials
14
Berlin (Germany)
TC 150/SC 6
Implants for surgery/Active implants
14-15
Washington, D.C
(USA)
JTC 1/SC 22
Information technology/Programming languages, their environments and system software interfaces
14-16
Seoul (Korea,
Republic of)
TMB
Technical Management Board
14-17
Lahaina, Hawaii
(USA)
TC 127
Earth-moving machinery
14-17
Washington, D.C
(USA)
TC 157
Non-systemic contraceptives and STI barrier prophylactics
14-17
Boulder (USA)
TC 172/SC 5
Optics and photonics/Microscopes and endoscopes
14-18
Berlin (Germany)
TC 150
Implants for surgery
14-18
Victoria (Canada)
TC 205
Building environment design
14-25
Berlin (Germany)
TC 213
Dimensional and geometrical product specifications and verification
15
Seoul (Korea,
DEVCO
Committee on developing country matters
Republic of)
15
Vienna (Austria)
TC 33
Refractories
15
Berlin (Germany)
TC 150/SC 5
Implants for surgery/Osteosynthesis and spinal devices
15
Berlin (Germany)
TC 150/SC 7
Implants for surgery/Tissue-engineered medical products
16-18
Seoul (Korea,
Republic of)
GA
General Assembly
17
Seoul (Korea,
Republic of)
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
17
Milan (Italy)
TC 43/SC 2
Acoustics/Building acoustics
17
Kanazawa (Japan)
TC 142
Cleaning equipment for air and other gases
17
Berlin (Germany)
TC 150/SC 2
Implants for surgery/Cardiovascular implants and extracorporeal systems
17
Berlin (Germany)
TC 150/SC 4
Implants for surgery/Bone and joint replacements
17-18
Hangzhou (China)
TC 8/SC 13
Ships and marine technology/Marine technology
17-18
Delft (Netherlands)
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
17-18
Victoria (Canada)
TC 163
Thermal performance and energy use in the built environment
18
Milan (Italy)
TC 43
Acoustics
18
Milan (Italy)
TC 43/SC 1
Acoustics/Noise
18
Berlin (Germany)
TC 146/SC 2
Air quality/Workplace atmospheres
18-19
Hawaii (USA)
TC 23/SC 14
Tractors and machinery for agriculture and forestry/Operator controls, operator symbols and other
displays, operator manuals
20
Williamsburg
(USA)
TC 27/SC 1
Solid mineral fuels/Coal preparation: Terminology and performance
20-26
Williamsburg
(USA)
TC 27
Solid mineral fuels
21
Williamsburg
(USA)
TC 27/SC 5
Solid mineral fuels/Methods of analysis
21-22
Paris (France)
TC 61/SC 4
Plastics/Burning behaviour
21-22
Cleveland (USA)
TC 82
Mining
21-23
London (United
Kingdom)
TC 232
Learning services outside formal education
21-24
Williamsburg
(USA)
TC 27/SC 4
Solid mineral fuels/Sampling
21-25
Geneva (Switzerland)
PC 283
Occupational health and safety management systems
21-25
Poznan (Poland)
TC 23/SC 6
Tractors and machinery for agriculture and forestry/Equipment for crop protection
21-25
Mexico City
(Mexico)
TC 59/SC 17
Buildings and civil engineering works/Sustainability in buildings and civil engineering works
21-25
Johor Bahru
(Malaysia)
TC 165
Timber structures
22
Williamsburg
(USA)
TC 27/SC 3
Solid mineral fuels/Coke
22
Fort Lauderdale
(USA)
TC 104/SC 4
Freight containers/Identification and communication
22
Berlin (Germany)
TC 111/SC 1
Round steel link chains, chain slings, components and accessories/Chains and chain slings
22-25
Beijing (China)
JTC 1/SC 34
Information technology/Document description and processing languages
23
Gouda (Netherlands)
TC 34/SC 2
Food products/Oleaginous seeds and fruits and oilseed meals
23
Berlin (Germany)
TC 111
Round steel link chains, chain slings, components and accessories
23
Berlin (Germany)
TC 111/SC 3
Round steel link chains, chain slings, components and accessories/Components and accessories
23-24
Delft (Netherlands)
TC 146/SC 5
Air quality/Meteorology
23-24
Beijing (China)
TC 290
Online reputation
24-25
Gouda (Netherlands)
TC 34/SC 11
Food products/Animal and vegetable fats and oils
24-25
Winterthur (Switzerland)
TC 226
Materials for the production of primary aluminium
25
Delft (Netherlands)
TC 146/SC 1
Air quality/Stationary source emissions
25
Delft (Netherlands)
TC 146/SC 3
Air quality/Ambient atmospheres
25
Delft (Netherlands)
TC 146/SC 6
Air quality/Indoor air
28-29
Basel (Switzerland)
TC 44/SC 8
Welding and allied processes/Equipment for gas welding, cutting and allied processes
28-29
Delft (Netherlands)
TC 255
Biogas
28-30
New York (USA)
PC 286
Collaborative business relationship management -- Framework
29
Paris (France)
TC 86/SC 1
Refrigeration and air-conditioning/Safety and environmental requirements for refrigerating systems
29-30
Tokyo (Japan)
TC 44/SC 3
Welding and allied processes/Welding consumables
September-October 2015
21-2
Vienna (Austria)
JTC 1/SC 17
Information technology/Cards and personal identification
27-3
Bangkok (Thailand)
TC 106
Dentistry
28-2
Kuala Lumpur
(Malaysia)
PC 278
Anti-bribery management systems
28-2
Stockholm
(Sweden)
TC 218
Timber
28-2
Edmonton (Canada)
TC 229
Nanotechnologies
October 2015
1
Rome (Italy)
TC 39/SC 4
Machine tools/Woodworking machines
1
Bangkok (Thailand)
TC 106/SC 3
Dentistry/Terminology
1
Bangkok (Thailand)
TC 106/SC 4
Dentistry/Dental instruments
1
Bangkok (Thailand)
TC 106/SC 6
Dentistry/Dental equipment
1
Bangkok (Thailand)
TC 106/SC 7
Dentistry/Oral care products
1
Bangkok (Thailand)
TC 106/SC 8
Dentistry/Dental implants
1
Bangkok (Thailand)
TC 106/SC 9
Dentistry/Dental CAD/CAM systems
2
Paris (France)
TC 86/SC 8
Refrigeration and air-conditioning/Refrigerants and refrigeration lubricants
2
Bangkok (Thailand)
TC 106/SC 1
Dentistry/Filling and restorative materials
2
Bangkok (Thailand)
TC 106/SC 2
Dentistry/Prosthodontic materials
4-9
New Delhi (India)
TC 61
Plastics
4-9
New Delhi (India)
TC 61/SC 2
Plastics/Mechanical properties
5
Madrid (Spain)
TC 59
Buildings and civil engineering works
5
Tokorozawa
(Japan)
TC 173/SC 1
Assistive products for persons with disability/Wheelchairs
5-8
New Delhi (India)
TC 61/SC 9
Plastics/Thermoplastic materials
5-8
Paris (France)
TC 172/SC 1
Optics and photonics/Fundamental standards
5-9
Dublin (Ireland)
JTC 1/SC 38
Information technology/Cloud Computing and Distributed Platforms
5-9
Madrid (Spain)
TC 59/SC 3
Buildings and civil engineering works/Functional/user requirements and performance in building
construction
5-9
Madrid (Spain)
TC 59/SC 15
Buildings and civil engineering works/Performance description of houses
5-9
Vienna (Austria)
TC 190
Soil quality
5-9
Vienna (Austria)
TC 190/SC 3
Soil quality/Chemical methods and soil characteristics
5-9
Vienna (Austria)
TC 190/SC 4
Soil quality/Biological methods
5-9
Vienna (Austria)
TC 190/SC 7
Soil quality/Soil and site assessment
5-9
Paris (France)
TC 268
Sustainable development in communities
5-9
Paris (France)
TC 268/SC 1
Sustainable development in communities/Smart community infrastructures
6
Madrid (Spain)
TC 59/SC 18
Buildings and civil engineering works/Construction procurement
6
Hong Kong
(Hong Kong,
China)
TC 176/SC 1
Quality management and quality assurance/Concepts and terminology
6
Vienna (Austria)
TC 190/SC 1
Soil quality/Evaluation of criteria, terminology and codification
6
Lyon (France)
IULTCS
International Union of Leather Technologists and Chemists Societies
6-8
London (United
Kingdom)
TC 25
Cast irons and pig irons
6-8
Paris (France)
TC 172/SC 3
Optics and photonics/Optical materials and components
7
Madrid (Spain)
TC 59/SC 2
Buildings and civil engineering works/Terminology and harmonization of languages
7
Madrid (Spain)
TC 59/SC 16
Buildings and civil engineering works/Accessibility and usability of the built environment
7
New Delhi (India)
TC 61/SC 1
Plastics/Terminology
7
New Delhi (India)
TC 61/SC 5
Plastics/Physical-chemical properties
7
New Delhi (India)
TC 61/SC 10
Plastics/Cellular plastics
7
New Delhi (India)
TC 61/SC 11
Plastics/Products
7
New Delhi (India)
TC 61/SC 12
Plastics/Thermosetting materials
8
Virtual (Unknown)
President's
committee
President's committee
8
Bloomington
(USA)
TC 23/SC 13
Tractors and machinery for agriculture and forestry/Powered lawn and garden equipment
8
New Delhi (India)
TC 61/SC 6
Plastics/Ageing, chemical and environmental resistance
8
New Delhi (India)
TC 61/SC 13
Plastics/Composites and reinforcement fibres
8
Vienna (Austria)
TC 190/SC 2
Soil quality/Sampling
8-9
Sao Paulo (Brazil)
TC 58/SC 2
Gas cylinders/Cylinder fittings
8-9
Toronto (Canada)
TC 225
Market, opinion and social research
9
Prague (Czech
Republic)
TC 110/SC 4
Industrial trucks/Rough-terrain trucks
9
Copenhagen
(Denmark)
TC 254
Safety of amusement rides and amusement devices
11-16
Potsdam (Germany)
TC 204
Intelligent transport systems
12
Beijing (China)
TC 20/SC 4
Aircraft and space vehicles/Aerospace fastener systems
12-14
Delft (Netherlands)
TC 59/SC 8
Buildings and civil engineering works/Sealants
12-14
Berlin (Germany)
TC 185
Safety devices for protection against excessive pressure
12-16
Paris (France)
TC 34/SC 17
Food products/Management systems for food safety
12-16
Turin (Italy)
TC 70
Internal combustion engines
12-16
Berlin (Germany)
TC 138
Plastics pipes, fittings and valves for the transport of fluids
12-16
Berlin (Germany)
TC 138/SC 8
Plastics pipes, fittings and valves for the transport of fluids/Rehabilitation of pipeline systems
12-16
Beijing (China)
TC 181
Safety of toys
13
New Orleans
(USA)
TC 2/SC 14
Fasteners/Surface coatings
13
Lyon (France)
TC 38/SC 1
Textiles/Tests for coloured textiles and colorants
13
Lyon (France)
TC 38/SC 2
Textiles/Cleansing, finishing and water resistance tests
13-14
Osaka (Japan)
TC 24/SC 4
Particle characterization including sieving/Particle characterization
13-15
Renton (USA)
TC 44/SC 14
Welding and allied processes/Welding and brazing in aerospace
*
13-15
Porto (Portugal)
TC 216
Footwear
14
New Orleans
(USA)
TC 2/SC 7
Fasteners/Reference standards
14
Paris (France)
TC 28/SC 2
Petroleum products and related products of synthetic or biological origin/Measurement of petroleum and related products
14
Lyon (France)
TC 38/SC 23
Textiles/Fibres and yarns
14
Lyon (France)
TC 38/SC 24
Textiles/Conditioning atmospheres and physical tests for textile fabrics
14
San Diego (USA)
TC 70/SC 7
Internal combustion engines/Tests for lubricating oil filters
14
Porto (Portugal)
TC 137
Footwear sizing designations and marking systems
14
Berlin (Germany)
TC 244
Industrial furnaces and associated processing equipment
14-15
Beijing (China)
TC 20
Aircraft and space vehicles
15
New Orleans
(USA)
TC 2/SC 12
Fasteners/Fasteners with metric internal thread
15
La Plaine StDenis (France)
TC 17/SC 7
Steel/Methods of testing (other than mechanical tests and chemical analysis)
15
Lyon (France)
TC 38
Textiles
15
Riccione (Italy)
TC 45/SC 4
Rubber and rubber products/Products (other than hoses)
15
Berlin (Germany)
TC 138/SC 6
Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes and fittings for
all applications
15-17
Seattle (USA)
TC 201
Surface chemical analysis
16
New Orleans
(USA)
TC 2
Fasteners
16
San Diego (USA)
TC 22/SC 34
Road vehicles/Propulsion, powertrain and powertrain fluids
16
Vienna (Austria)
TC 46/SC 8
Information and documentation/Quality - Statistics and performance evaluation
16
Singapore (Singapore)
TC 59/SC 13
Buildings and civil engineering works/Organization of information about construction works
16
Neuilly-sur-Seine
(France)
TC 67/SC 9
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Liquefied natural gas installations and equipment
18-23
Vichy (France)
TC 45
Rubber and rubber products
18-23
Vichy (France)
TC 45/SC 4
Rubber and rubber products/Products (other than hoses)
18-23
Baltimore (USA)
TC 184/SC 4
Automation systems and integration/Industrial data
19
Santiago (Chile)
TC 195/SC 1
Building construction machinery and equipment/Machinery and equipment for concrete work
19-20
Santa Ana (USA)
TC 34/SC 15
Food products/Coffee
19-21
Kyoto (Japan)
TC 266
Biomimetics
19-21
Jeju (Korea,
Republic of)
TC 281
Fine Bubble Technology
19-22
Vichy (France)
TC 45/SC 1
Rubber and rubber products/Rubber and plastics hoses and hose assemblies
19-23
Matsue (Japan)
JTC 1/SC 2
Information technology/Coded character sets
19-23
Brussels (Belgium)
TC 154
Processes, data elements and documents in commerce, industry and administration
*
19-24
Frankfurt (Germany)
TC 131
Fluid power systems
20
Metz (France)
TC 173/SC 2
Assistive products for persons with disability/Classification and terminology
20-21
La Plaine StDenis (France)
TC 23/SC 3
Tractors and machinery for agriculture and forestry/Safety and comfort
20-21
Sao Paulo (Brazil)
TC 135/SC 9
Non-destructive testing/Acoustic emission testing
20-23
Oslo (Norway)
TC 58/SC 3
Gas cylinders/Cylinder design
20-23
Beijing (China)
TC 269
Railway applications
21
Stockholm
(Sweden)
TC 17/SC 1
Steel/Methods of determination of chemical composition
21
Gaithersburg
(USA)
TC 92/SC 1
Fire safety/Fire initiation and growth
21
Dublin (Ireland)
TC 279
Innovation management
21-23
Katowize (Poland)
TC 263
Coalbed methane (CBM)
22
Vichy (France)
TC 45/SC 2
Rubber and rubber products/Testing and analysis
22
Vienna (Austria)
TC 83/SC 4
Sports and other recreational facilities and equipment/Snowsports equipment
22
Gaithersburg
(USA)
TC 92/SC 3
Fire safety/Fire threat to people and environment
22
Santiago (Chile)
TC 195
Building construction machinery and equipment
22
Frankfurt (Germany)
TC 291
Domestic gas cooking appliances
22-23
Göteborg (Sweden)
TC 22/SC 33
Road vehicles/Vehicle dynamics and chassis components
22-23
London (United
Kingdom)
TC 79/SC 2
Light metals and their alloys/Organic and anodic oxidation coatings on aluminium
22-23
Berlin (Germany)
TC 209
Cleanrooms and associated controlled environments
23
Vichy (France)
TC 45/SC 3
Rubber and rubber products/Raw materials (including latex) for use in the rubber industry
23
Gaithersburg
(USA)
TC 92
Fire safety
23
Gaithersburg
(USA)
TC 92/SC 2
Fire safety/Fire containment
23
Gaithersburg
(USA)
TC 92/SC 4
Fire safety/Fire safety engineering
23-27
Phoenix (USA)
TC 134
Fertilizers and soil conditioners
24-28
Sydney (Australia)
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
25-27
Los Angeles
(USA)
TC 159/SC 5
Ergonomics/Ergonomics of the physical environment
26
Arlington (USA)
TC 79/SC 6
Light metals and their alloys/Wrought aluminium and aluminium alloys
26-28
Toronto (Canada)
PC 280
Management Consultancy
26-29
Pretoria (South
TC 264
Fireworks
Africa)
26-30
St. Petersburg
(Russian Federation)
TC 8
Ships and marine technology
26-30
Porto Alegre
(Brazil)
TC 23/SC 17
Tractors and machinery for agriculture and forestry/Manually portable forest machinery
26-30
Milan (Italy)
TC 131/SC 4
Fluid power systems/Connectors and similar products and components
26-30
Milan (Italy)
TC 131/SC 6
Fluid power systems/Contamination control
26-31
Beijing (China)
JTC 1
Information technology
27
St. Petersburg
(Russian Federation)
TC 8/SC 6
Ships and marine technology/Navigation and ship operations
27
St. Petersburg
(Russian Federation)
TC 8/SC 7
Ships and marine technology/Inland navigation vessels
27
St. Petersburg
(Russian Federation)
TC 8/SC 11
Ships and marine technology/Intermodal and Short Sea Shipping
27
Arlington (USA)
TC 79/SC 9
Light metals and their alloys/Symbolization
27
Tuttlingen (Germany)
TC 170
Surgical instruments
27-28
Greenville (USA)
TC 31/SC 9
Tyres, rims and valves/Valves for tube and tubeless tyres
28
Arlington (USA)
TC 79/SC 5
Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium
28-29
La Plaine StDenis (France)
TC 135/SC 4
Non-destructive testing/Eddy current methods
28-29
Mainz (Germany)
TC 199
Safety of machinery
28-30
Tsukuba (Japan)
TC 202
Microbeam analysis
29
Seoul (Korea,
Republic of)
TC 71
Concrete, reinforced concrete and pre-stressed concrete
29
Washington, D.C
(USA)
TC 79
Light metals and their alloys
29
Silver Spring
(USA)
TC 234
Fisheries and aquaculture
29
Berlin (Germany)
TC 256
Pigments, dyestuffs and extenders
29-30
Tampa, Florida
(USA)
TC 17/SC 12
Steel/Continuous mill flat rolled products
November 2015
1-4
Ghent (Belgium)
TC 94/SC 14
Personal safety -- Protective clothing and equipment/Fire-fighters' personal equipment
2
Atlanta (USA)
TC 41/SC 3
Pulleys and belts (including veebelts)/Conveyor belts
2-4
Beijing (China)
PC 295
Audit data collection
2-6
New Jersey
(USA)
JTC 1/SC 7
Information technology/Software and systems engineering
2-6
Bern (Switzerland)
TC 215
Health informatics
**
2-6
Beijing (China)
TC 282
Water re-use
2-6
Beijing (China)
TC 282/SC 1
Water re-use/Treated wastewater re-use for Irrigation
2-6
Beijing (China)
TC 282/SC 2
Water re-use/Water re-use in urban areas
2-8
Seoul (Korea,
Republic of)
TC 130
Graphic technology
3
Atlanta (USA)
TC 41/SC 1
Pulleys and belts (including veebelts)/Friction
3
Berlin (Germany)
TC 83
Sports and other recreational facilities and equipment
3-5
Montreal (Canada)
TC 20/SC 9
Aircraft and space vehicles/Air cargo and ground equipment
3-5
Berlin (Germany)
TC 22/SC 39
Road vehicles/Ergonomics
3-6
Accra (Ghana)
TC 285
Clean cookstoves and clean cooking solutions
4
Atlanta (USA)
TC 41/SC 4
Pulleys and belts (including veebelts)/Synchronous belt drives
4
Sydney (Australia)
TC 110/SC 1
Industrial trucks/General terminology
4
Beijing (China)
TC 282/SC 3
Water re-use/Risk and performance evaluation of water re-use systems
5
Atlanta (USA)
TC 41
Pulleys and belts (including veebelts)
5
Sydney (Australia)
TC 110/SC 2
Industrial trucks/Safety of powered industrial trucks
5
Yellow Springs
(USA)
TC 159/SC 3
Ergonomics/Anthropometry and biomechanics
6
Sydney (Australia)
TC 110
Industrial trucks
6
Sydney (Australia)
TC 110/SC 5
Industrial trucks/Sustainability
9-12
Sevilla (Spain)
TC 189
Ceramic tile
9-12
Rio de Janeiro
(Brazil)
TC 262
Risk management
9-13
London (United
Kingdom)
PC 287
Chain of custody of wood and wood-based products
9-13
Kobe (Japan)
TC 21
Equipment for fire protection and fire fighting
9-13
Tokyo (Japan)
TC 94/SC 15
Personal safety -- Protective clothing and equipment/Respiratory protective devices
9-13
Sydney (Australia)
TC 275
Sludge recovery, recycling, treatment and disposal
10-13
Balzers (Liechtenstein)
TC 112
Vacuum technology
10-13
Yokohama (Japan)
TC 251
Asset management
11
Vicenza (Italy)
TC 44/SC 13
Welding and allied processes/Brazing materials and processes
11
Nottingham
(United Kingdom)
TC 60
Gears
11-13
Munich (Germany)
TC 44/SC 12
Welding and allied processes/Soldering materials
*
11-13
Geel (Belgium)
TC 212
Clinical laboratory testing and in vitro diagnostic test systems
12-13
Kuala Lumpur
(Malaysia)
TC 227
Springs
12-13
Galveston (USA)
TC 260
Human resource management
13
Apeldoorn
(Netherlands)
TC 22/SC 41
Road vehicles/Specific aspects for gaseous fuels
13
Kuala Lumpur
(Malaysia)
TC 123
Plain bearings
16
Cleveland (USA)
PC 252
Natural gas fuelling stations for vehicles
16-17
Brasilia (Brazil)
TC 241
Road traffic safety management systems
16-18
Bergamo (Italy)
TC 147/SC 3
Water quality/Radioactivity measurements
16-19
Amsterdam
(Netherlands)
TC 188
Small craft
16-20
Kyoto (Japan)
TC 160
Glass in building
16-20
Seattle (USA)
TC 210
Quality management and corresponding general aspects for medical devices
16-21
Reston (USA)
TC 98/SC 3
Bases for design of structures/Loads, forces and other actions
17-19
Agen (France)
TC 20/SC 10
Aircraft and space vehicles/Aerospace fluid systems and components
18
Stockholm
(Sweden)
TC 10/SC 8
Technical product documentation/Construction documentation
19
Reston (USA)
TC 98/SC 2
Bases for design of structures/Reliability of structures
20-28
Hong Kong
(Hong Kong,
China)
TC 176
Quality management and quality assurance
23-27
Hong Kong
(Hong Kong,
China)
TC 176/SC 2
Quality management and quality assurance/Quality systems
23-27
Hong Kong
(Hong Kong,
China)
TC 176/SC 3
Quality management and quality assurance/Supporting technologies
23-27
Ardooie (Belgium)
TC 188/SC 1
Small craft/Personal safety equipment
24-26
Sydney (Australia)
PC 294
Guidance on unit pricing
26
Madrid (Spain)
TC 94/SC 3
Personal safety -- Protective clothing and equipment/Foot protection
TC 120
Leather
Istanbul (Turkey)
**
November-December 2015
16-21
Reston (USA)
30-3
(Unknown)
30-4
Bali (Indonesia)
**
TC 98
Bases for design of structures
TC 69/SC 8
Applications of statistical methods/Application of statistical and related methodology for new technology and product development
TC 292
Security and resilience
TC 121/SC 2
Anaesthetic and respiratory equipment/Airways and related equipment
December 2015
1-3
Wokingham
(United King-
dom)
2-3
London (United
Kingdom)
TC 20/SC 16
Aircraft and space vehicles/Unmanned aircraft systems
3-4
Auburn Hills
(USA)
TC 22/SC 31
Road vehicles/Data communication
3-4
Torrance (USA)
TC 197
Hydrogen technologies
8
Istanbul (Turkey)
TC 180
Solar energy
8-9
Düsseldorf
(Germany)
TC 17/SC 4
Steel/Heat treatable and alloy steels
10
Berlin (Germany)
TC 44/SC 6
Welding and allied processes/Resistance welding and allied mechanical joining
10-11
Sydney (Australia)
TC 211
Geographic information/Geomatics
11
Dubaï (United
Arab Emirates)
TC 217
Cosmetics
14-17
Lyon (France)
TC 272
Forensic sciences
15-16
Berlin (Germany)
TC 44/SC 10
Welding and allied processes/Quality management in the field of welding
18
Berlin (Germany)
TC 198
Sterilization of health care products
**
October 2015
12-16
Berlin (Germany)
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste
and drainage (including land drainage)
12-16
Berlin (Germany)
TC 138/SC 2
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water
supplies
12-16
Berlin (Germany)
TC 138/SC 3
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial
applications
12-16
Berlin (Germany)
TC 138/SC 4
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply
of gaseous fuels
12-16
Berlin (Germany)
TC 138/SC 5
Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes, fittings and
valves of plastic materials and their accessories -- Test methods and basic specifications
12-16
Berlin (Germany)
TC 138/SC 7
Plastics pipes, fittings and valves for the transport of fluids/Valves and auxiliary equipment of plastics materials
January 2016
11-15
Mexico City
(Mexico)
*
PC 288
Educational organizations management systems - Requirements with guidance for use
11-15
Casablanca
(Morocco)
*
TC 69/SC 4
Applications of statistical methods/Applications of statistical methods in product and process management
11-15
Vienna (Austria)
*
TC 268
Sustainable development in communities
11-15
Vienna (Austria)
**
TC 268/SC 1
Sustainable development in communities/Smart community infrastructures
22
Berlin (Germany)
*
TC 76
Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
25-27
London (United
Kingdom)
*
TC 8/SC 8
Ships and marine technology/Ship design
25-27
(Germany)
**
TC 69/SC 7
Applications of statistical methods/Applications of statistical and related techniques for the implementation of Six Sigma
25-29
London (United
Kingdom)
**
TC 107
Metallic and other inorganic coatings
25-29
London (United
Kingdom)
**
TC 107/SC 3
Metallic and other inorganic coatings/Electrodeposited coatings and related finishes
25-29
London (United
Kingdom)
**
TC 107/SC 8
Metallic and other inorganic coatings/Chemical conversion coatings
February 2016
8-12
Paris (France)
*
TC 58/SC 4
Gas cylinders/Operational requirements for gas cylinders
25-26
Geneva (Switzerland)
*
TMB
Technical Management Board
29
Birmingham
(United Kingdom)
TC 257
Evaluation of energy savings
Paris (France)
**
TC 34/SC 18
Food products/Cocoa
(USA)
**
TC 213
Dimensional and geometrical product specifications and verification
March 2016
3-4
(Unknown)
**
TC 182/SC 1
Geotechnics/Geotechnical investigation and testing
14-18
Kanazawa (Japan)
*
TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
14-18
Sydney (Australia)
TC 108/SC 2
Mechanical vibration, shock and condition monitoring/Measurement and evaluation of mechanical
vibration and shock as applied to machines, vehicles and structures
14-18
Sydney (Australia)
TC 108/SC 5
Mechanical vibration, shock and condition monitoring/Condition monitoring and diagnostics of
machine systems
17
Milan (Italy)
TC 221
Geosynthetics
17-18
Geneva (Switzerland)
*
COUNCIL
Council
**
TC 67/SC 7
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Offshore structures
1st Quarter 2016
Singapore (Singapore)
April 2016
6
Delft (Netherlands)
*
TC 219
Floor coverings
11-12
Beijing (China)
*
TC 117
Fans
11-15
Sydney (Australia)
**
TC 178
Lifts, escalators and moving walks
11-16
Copenhagen
(Denmark)
TC 108
Mechanical vibration, shock and condition monitoring
12-13
(Europe)
**
TC 67/SC 2
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Pipeline transportation systems
18-19
Tampa, Florida
(USA)
**
JTC 1/SC 27
Information technology/IT Security techniques
22-23
ClausthalZellerfeld (Germany)
*
TC 24/SC 4
Particle characterization including sieving/Particle characterization
25
Frankfurt (Germany)
**
TC 68/SC 4
Financial services/Securities and related financial instruments
25-29
Berlin (Germany)
**
TC 161
Control and protective devices for gas and/or oil burners and appliances
26
Frankfurt (Ger-
*
TC 68/SC 7
Financial services/Core banking
many)
28
Frankfurt (Germany)
*
TC 68
Financial services
Toronto (Canada)
**
JTC 1/SC 38
Information technology/Cloud Computing and Distributed Platforms
May 2016
2-6
Wellington (New
Zealand)
*
TC 46/SC 11
Information and documentation/Archives/records management
2-6
Amsterdam
(Netherlands)
*
TC 215
Health informatics
6-13
Berlin (Germany)
**
TC 10
Technical product documentation
9-13
Paris (France)
*
TC 34/SC 9
Food products/Microbiology
9-13
(Germany)
**
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
9-13
(USA)
**
TC 276
Biotechnology
12-13
Tokyo (Japan)
**
TC 17/SC 16
Steel/Steels for the reinforcement and prestressing of concrete
16-20
Suzhou (China)
*
JTC 1/SC 40
Information technology/IT Service Management and IT Governance
16-20
Chicago (USA)
**
TC 121
Anaesthetic and respiratory equipment
19-20
Tokyo (Japan)
*
TC 184/SC 5
Automation systems and integration/Interoperability, integration, and architectures for enterprise
systems and automation applications
22-27
Sapporo (Japan)
*
TC 184/SC 4
Automation systems and integration/Industrial data
23-25
Rome (Italy)
*
TC 145
Graphical symbols
23-28
Ljubljana (Slovenia)
*
TC 37/SC 4
Terminology and other language and content resources/Language resource management
23-28
Stockholm
(Sweden)
*
TC 130
Graphic technology
25
Brussels (Belgium)
**
TC 115
Pumps
26-27
(Malaysia)
**
TC 228
Tourism and related services
(Japan)
**
TC 22/SC 39
Road vehicles/Ergonomics
(Italy)
**
TC 67/SC 4
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and production equipment
(India)
**
TC 85
Nuclear energy, nuclear technologies, and radiological protection
Atlanta (USA)
**
TC 86
Refrigeration and air-conditioning
(Korea, Republic
of)
**
TC 122
Packaging
(USA)
**
TC 282/SC 3
Water re-use/Risk and performance evaluation of water re-use systems
Mexico City
(Mexico)
**
TC 289
Brand evaluation
June 2016
4
Geneva (Switzerland)
*
JTC 1/SC 29
Information technology/Coding of audio, picture, multimedia and hypermedia information
6-7
Geneva (Switzerland)
*
TC 172/SC 6
Optics and photonics/Geodetic and surveying instruments
6-8
Paris (France)
*
TC 220
Cryogenic vessels
7-10
Prague (Czech
Republic)
*
TC 156
Corrosion of metals and alloys
14-17
Ekaterinburg
(Russian Federation)
**
REMCO
Committee on reference materials
15-16
Geneva (Switzerland)
*
TMB
Technical Management Board
18-20
Munich (Germany)
TC 135
Non-destructive testing
20-21
Berlin (Germany)
*
TC 22/SC 32
Road vehicles/Electrical and electronic components and general system aspects
(Germany)
**
JTC 1/SC 36
Information technology/Information technology for learning, education and training
(Europe)
**
TC 22/SC 38
Road vehicles/Motorcycles and mopeds
(Germany)
**
TC 29/SC 10
Small tools/Assembly tools for screws and nuts, pliers and nippers
(Canada)
**
TC 159/SC 1
Ergonomics/General ergonomics principles
St. Petersburg
(Russian Federation)
**
TC 172/SC 4
Optics and photonics/Telescopic systems
Stockholm
(Sweden)
**
TC 242
Energy Management
Turin (Italy)
**
TC 274
Light and lighting
June-July 2016
25-1
(Denmark)
**
TC 37
Terminology and other language and content resources
27-1
London (United
Kingdom)
*
TC 188
Small craft
27-1
(Unknown)
**
TC 224
Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators
27-1
Hangzhou (China)
**
TC 268
Sustainable development in communities
27-1
Hangzhou (China)
**
TC 268/SC 1
Sustainable development in communities/Smart community infrastructures
**
TC 34/SC 4
Food products/Cereals and pulses
New Delhi (India)
**
TC 34/SC 7
Food products/Spices, culinary herbs and condiments
(China)
**
TC 34/SC 16
Food products/Horizontal methods for molecular biomarker analysis
Chennai (India)
**
TC 120
Leather
**
TC 91
Surface active agents
*
TC 108/SC 4
Mechanical vibration, shock and condition monitoring/Human exposure to mechanical vibration
and shock
2nd Quarter 2016
(Germany)
1st Semester 2016
August 2016
(USA)
September 2016
5-9
Bilbao (Spain)
5-10
Sydney (Australia)
*
TC 147
Water quality
19
Beijing (China)
*
COUNCIL
Council
20
Beijing (China)
*
TMB
Technical Management Board
21-23
Beijing (China)
*
GA
General Assembly
29-30
Paris (France)
*
TC 17
Steel
Vienna (Austria)
**
JTC 1/SC 22
Information technology/Programming languages, their environments and system software interfaces
Sao Paulo (Brazil)
**
TC 173
Assistive products for persons with disability
Sao Paulo (Brazil)
**
TC 209
Cleanrooms and associated controlled environments
Shanghai (China)
**
TC 213
Dimensional and geometrical product specifications and verification
Beijing (China)
**
TC 256
Pigments, dyestuffs and extenders
October 2016
6-7
Berlin (Germany)
**
TC 119
Powder metallurgy
17-21
Berlin (Germany)
**
JTC 1/SC 38
Information technology/Cloud Computing and Distributed Platforms
17-21
(China)
**
TC 5/SC 2
Ferrous metal pipes and metallic fittings/Cast iron pipes, fittings and their joints
17-21
Kyoto (Japan)
*
TC 138
Plastics pipes, fittings and valves for the transport of fluids
20-21
London (United
Kingdom)
*
TC 58
Gas cylinders
24-28
Sydney (Australia)
*
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
(Brazil)
**
TC 59
Buildings and civil engineering works
(USA)
**
TC 146
Air quality
(Korea, Republic
of)
**
TC 201
Surface chemical analysis
Tel Aviv (Israel)
**
TC 282
Water re-use
Tel Aviv (Israel)
**
TC 282/SC 3
Water re-use/Risk and performance evaluation of water re-use systems
November 2016
1-4
(Unknown)
**
TC 22/SC 36
Road vehicles/Safety aspects and impact testing
7-8
Seoul (Korea,
Republic of)
*
TC 159/SC 4
Ergonomics/Ergonomics of human-system interaction
7-12
Lillehammer
(Norway)
**
JTC 1
Information technology
Christchurch
(New Zealand)
**
TC 20/SC 1
Aircraft and space vehicles/Aerospace electrical requirements
(Malaysia)
**
TC 215
Health informatics
Delft (Netherlands)
**
TC 28
Petroleum products and related products of synthetic or biological origin
Delft (Nether-
**
TC 28/SC 5
Petroleum products and related products of synthetic or biological origin/Measurement of refriger-
4th Quarter 2016
lands)
ated hydrocarbon and non-petroleum based liquefied gaseous fuels
Delft (Netherlands)
**
TC 28/SC 7
Petroleum products and related products of synthetic or biological origin/Liquid Biofuels
(India)
**
TC 113
Hydrometry
**
TC 34/SC 18
Food products/Cocoa
(Korea, Republic
of)
**
JTC 1/SC 23
Information technology/Digitally Recorded Media for Information Interchange and Storage
(South Africa)
**
TC 44
Welding and allied processes
(Malaysia)
**
TC 45
Rubber and rubber products
Wellington (New
Zealand)
**
TC 46
Information and documentation
(Sweden)
**
TC 102
Iron ore and direct reduced iron
(Japan)
**
TC 138/SC 2
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water
supplies
(Japan)
**
TC 183
Copper, lead, zinc and nickel ores and concentrates
Guilin (China)
**
TC 29/SC 8
Small tools/Tools for pressing and moulding
(China)
**
TC 215
Health informatics
Washington, D.C
(USA)
**
TC 4
Rolling bearings
(Sweden)
**
TC 29
Small tools
(Australia)
**
JTC 1/SC 36
Information technology/Information technology for learning, education and training
(USA)
**
TC 42
Photography
**
TC 31
Tyres, rims and valves
London (United
Kingdom)
**
JTC 1/SC 22
Information technology/Programming languages, their environments and system software interfaces
(Japan)
**
TC 20/SC 1
Aircraft and space vehicles/Aerospace electrical requirements
New Delhi (India)
**
TC 178
Lifts, escalators and moving walks
**
TC 289
Brand evaluation
*
TC 45
Rubber and rubber products
2nd Semester 2016
Paris (France)
Month unknown 2016
April 2017
10
May 2017
June 2017
2nd Quarter 2017
(North America)
September 2017
3rd Quarter 2017
Vienna (Austria)
October 2017
23
Hawaii (USA)
(Korea, Republic
of)
**
TC 215
Health informatics
**
TC 54
Essential oils
(South Africa)
**
TC 46
Information and documentation
(South Africa)
**
TC 46/SC 11
Information and documentation/Archives/records management
(United Kingdom)
**
TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
Seoul (Korea,
Republic of)
**
TC 161
Control and protective devices for gas and/or oil burners and appliances
(USA)
**
TC 198
Sterilization of health care products
**
JTC 1/SC 36
Information technology/Information technology for learning, education and training
**
TC 61
Plastics
(China)
**
TC 45
Rubber and rubber products
Kuala Lumpur
(Malaysia)
**
TC 215
Health informatics
(USA)
**
TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
Milan (Italy)
**
TC 161
Control and protective devices for gas and/or oil burners and appliances
November 2017
(India)
Month unknown 2017
June 2018
(Korea, Republic
of)
September 2018
(Japan)
October 2018
Month unknown 2018