ISO Update
Supplement to ISOfocus
October 2015
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International
Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been
reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The
DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 September to 30 September 2015
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 4
Rolling bearings
ISO/CD 20015
Spherical plain bearings — Static and dynamic load ratings
TC 17
Steel
ISO/DTR
21074
Application of ISO 5725 to the international test procedure for the chemical analysis of steel
TC 22
Road vehicles
ISO/CD 7637-4
Road Vehicles — Electrical disturbance by conduction and coupling — Part 4: Electrical transient conduction along shielded
high voltage supply lines only
ISO/DTR
7637-5
Road vehicles — Electrical disturbances from conduction and coupling — Part 5: Enhanced definitions and verification
methods for harmonization of pulse generators according to ISO 7637
TC 23
Tractors and machinery for agriculture and forestry
ISO/CD 199323
Agricultural and forestry machinery — Inspection of knapsack sprayers in use — Part 3: Inspection of knapsack sprayers in
use
ISO/CD 28139
Equipment for crop protection — Knapsack combustion engine-driven air-blast sprayers — Safety and environmental requirements
TC 39
Machine tools
ISO/CD 190858
Woodworking machines — Safety — Part 8: Wide belt calibrating and sanding machines
TC 45
Rubber and rubber products
ISO/CD 35
Natural rubber latex concentrate — Determination of mechanical stability
TC 54
Essential oils
ISO/CD 4730
Essential oil of Melaleuca, terpinen-4-ol type (Tea Tree oil)
ISO/CD 20809
Essential oil of cypress (Cupressus sempervirens L.) — Spanish type
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO/CD 35103
Petroleum and natural gas industries — Arctic Operations — Environmental monitoring
TC 69
Applications of statistical methods
ISO/CD 39510
Sampling procedures for inspection by variables — Introduction to the ISO 3951 series of variables sampling standards
ISO/CD 163555
Application of statistical and related methods to New technology and Product Development Process — Part 5: Solution
Strategy
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO/CD 9161
Uranium dioxide powder — Determination of apparent density and tap density
TC 92
Fire safety
ISO/CD 3008-2
Fire-resistance tests — Part 2: Lift landing door assemblies
TC 105
Steel wire ropes
ISO/CD 2408
Steel wire ropes for general purposes — Minimum requirements
TC 108
Mechanical vibration, shock and condition monitoring
ISO/CD 18095
Condition monitoring and diagnostics of power transformers
TC 126
Tobacco and tobacco products
ISO/CD 20778
Routine analytical cigarette-smoking machine — Definitions and conditions for the intense smoking regime
ISO/CD 20779
Cigarettes — Determination of total particulate matter using a routine analytical smoking machine under intense smoking
regime
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO/CD 121761
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
TC 147
Water quality
ISO/CD 20227
Water quality — Determination of the growth inhibition effects of waste waters, natural waters and chemicals on the duckweed Spirodela polyrhiza — Method using a stock culture independent microbiotest
TC 150
Implants for surgery
ISO/CD 19090
Tissue-engineered medical products — Bioactive ceramics — Cell migration ability test for porous body
TC 154
Processes, data elements and documents in commerce, industry and administration
ISO/CD 145333
Processes, data elements and documents in commerce, industry and administration — Long term signature profiles — Part
3: Long term signature profiles for PDF Advanced Electronic Signatures (PAdES)
TC 163
Thermal performance and energy use in the built environment
ISO/CD 7345
Thermal insulation — Physical quantities and definitions
TC 168
Prosthetics and orthotics
ISO/CD TS
16955
Prosthetics — Quantification of physical parameters of ankle foot devices and foot units
TC 171
Document management applications
ISO/CD 194751
Document management applications — Minimum requirements for the storage of documents — Part 1: Capturing
ISO/CD 194752
Document management applications — Minimum requirements for the storage of documents — Part 2: Storing
TC 178
Lifts, escalators and moving walks
ISO/DTS
22559-2
Safety requirements for lifts (elevators) — Part 2: Safety parameters meeting the global essential safety requirements
(GESRs)
ISO/DTR
22559-5
Safety requirements for lifts (elevators) — Part 5: Convergence of lift requirements
TC 184
Automation systems and integration
ISO/CD 163003
Automation systems and integration — Interoperability of capability units for manufacturing application solutions — Part 3:
Verification and validation of interoperability among capability units
TC 198
Sterilization of health care products
ISO/CD 111406
Sterilization of health care products — Chemical indicators — Part 6:
ISO/CD 16342
Sterilization of health care products — Method for validation of a biological indicator incubation period
ISO/CD 18472
Sterilization of health care products — Biological and chemical indicators — Test equipment
TC 199
Safety of machinery
ISO/CD 14118
Safety of machinery — Prevention of unexpected start-up
TC 206
Fine ceramics
ISO/CD 19603
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining elastic modulus and
strength of thick ceramic coating
ISO/CD 20343
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining elastic modulus of thick
ceramic coating at elevated temperature
TC 211
Geographic information/Geomatics
ISO/CD 19127
Geographic information — Geodetic codes and parameters
TC 260
Human resource management
ISO/DTS
30407
Human resource management — Cost-per-Hire
CASCO
Committee on conformity assessment
ISO/IEC CD
17025
General requirements for the competence of testing and calibration laboratories
JTC 1
Information technology
ISO/IEC CD
20246
Software and Systems Engineering — Work Product Reviews
ISO/IEC
147633:2014/PDAM
1
Information technology — Implementation and operation of customer premises cabling — Part 3: Testing of optical fibre
cabling — Amendment 1
ISO/IEC CD
29112
Information technology — Office equipment — Test charts and methods for measuring monochrome printer resolution
ISO/IEC CD
18477-4
Information technology — JPEG extensions — Part 4: Conformance testing
ISO/IEC CD
18477-5
Information technology — JPEG extensions — Part 5: Reference software
ISO/IEC CD
29167-10
Information technology — Automatic identification and data capture techniques — Part 10: Crypto suite AES-128 security
services for air interface communications
ISO/IEC PDTR
20748-1
Information Technology — Information Technology for Learning, Education and Training — Concept of Learning Analytics
Interoperability — Part 1: Reference models
ISO/IEC PDTR
20821
Learning environment components for automated contents adaptation
ISO/IEC CD
30136
Information Technology — Performance testing of template protection schemes
DIS circulated
Period from 01 September to 30 September 2015
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 2
ISO/DIS 1891-4
Fasteners
*
Fasteners — Terminology — Part 4: Controls, inspection, delivery, acceptance and quality
2015-12-11
TC 5
ISO/DIS 16132
Ferrous metal pipes and metallic fittings
*
Ductile iron pipes and fittings — Seal coats for cement mortar linings
2015-12-03
(Revision of ISO 16132:2004)
TC 6
ISO/DIS 18522
Paper, board and pulps
*
TC 10
ISO/DIS 15787.2
Paper and board - Automated off-line testing of physical properties for CD (cross direction)
profiles
Technical product documentation
*
Technical product documentation — Heat-treated ferrous parts — Presentation and indications
(Revision of ISO 15787:2001)
TC 17
Steel
2015-11-25
ISO/DIS 16120-1
*
Non-alloy steel wire rod for conversion to wire — Part 1: General requirements
2015-12-18
(Revision of ISO 16120-1:2011)
ISO/DIS 16120-2
*
Non-alloy steel wire rod for conversion to wire — Part 2: Specific requirements for generalpurpose wire rod
2015-12-18
(Revision of ISO 16120-2:2011)
ISO/DIS 16120-4
*
Non-alloy steel wire rod for conversion to wire — Part 4: Specific requirements for wire rod
for special applications
2015-12-18
(Revision of ISO 16120-4:2011)
TC 20
ISO/DIS 17520
ISO/DIS 17851
Aircraft and space vehicles
*
*
TC 21
ISO/DIS 7076-3
ISO/DIS 7076-4
ISO/DIS 11452-3
Space systems — Space environment simulation for material tests — General principles
and criteria
2015-12-29
2015-12-23
Equipment for fire protection and fire fighting
*
*
TC 22
ISO/DIS 15118-6
Space environment (natural and artificial) — Cosmic ray and solar energetic particle penetration inward the magnetosphere — Method of determination of the effective vertical cutoff rigidity
Fire protection — Foam fire extinguishing systems — Part 3: Medium expansion foam
equipment
2015-12-25
Fire protection — Foam fire extinguishing systems — Part 4: High expansion foam equipment
2015-12-25
Road vehicles
*
*
Road vehicles — Vehicle to grid communication interface — Part 6: General information
and use-case definition for wireless communication
2015-12-12
Road vehicles — Component test methods for electrical disturbances from narrowband
radiated electromagnetic energy — Part 3: Transverse electromagnetic mode (TEM) cell
2015-12-16
(Revision of ISO 11452-3:2001)
ISO/DIS 19689
*
Motorcycles and Mopeds — Communication between vehicle and external equipment for
diagnostics — Diagnostic connector and related electrical circuits, specification and use
ISO 126192:2014/DAmd 1
*
Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend
fuel system components — Part 2: Performance and general test methods — Amendment
1
ISO 126193:2014/DAmd 1
*
ISO/DIS 14469
*
Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend
fuel system components — Part 3: Pressure regulator — Amendment 1: .
2015-12-08
2015-12-08
Road vehicles — Compressed natural gas (CNG) refuelling connector
(Revision of ISO 14469-1:2004, ISO 14469-2:2007, ISO 14469-3:2006)
ISO/DIS 15501-2
*
Road vehicles — Compressed natural gas (CNG) fuel systems — Part 2: Test methods
2015-12-19
(Revision of ISO 15501-2:2001)
TC 29
ISO/DIS 26622-1
Small tools
*
Modular taper interface with ball track system — Part 1: Dimensions and designation of
shanks
2015-12-17
(Revision of ISO 26622-1:2008)
TC 31
ISO/DIS 18885-1
Tyres, rims and valves
*
TPMS snap-in valves — Part 1: Identification
2015-12-17
ISO/DIS 18885-2
*
TPMS snap-in valves — Part 2: Valve environment
2015-12-17
TC 39
ISO
2407:1997/DAmd
1
Machine tools
*
TC 42
ISO/DIS 20087
Test conditions for internal cylindrical grinding machines with horizontal spindle — Testing
of accuracy — Amendment 1
2015-12-04
Photography
*
Photography — Digital still cameras — Battery life measurement
2015-12-08
TC 54
ISO/DIS 8896
Essential oils
*
Essential oil of caraway (Carum carvi L.)
2015-12-10
(Revision of ISO 8896:1987)
TC 59
ISO/DIS 10563
Buildings and civil engineering works
*
Buildings and civil engineering works — Sealants — Determination of change in mass and
volume
2015-12-04
(Revision of ISO 10563:2005)
TC 61
Plastics
ISO 10431:2011/DAmd 1
*
ISO 10434:1998/DAmd 1
*
ISO/DIS 20029-1
*
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special
characteristics — Amendment 1
2015-12-11
Plastics — Symbols and abbreviated terms — Part 4: Flame retardants — Amendment 1
2015-12-11
Plastics — Thermoplastic polyester/ester and polyether/ester elastomers for moulding and
extrusion — Part 1: Designation system and basis for specifications
2015-12-18
(Revision of ISO 14910-2:2013)
ISO/DIS 20029-2
*
Plastics — Thermoplastic polyester/ester and polyether/ester elastomers for moulding and
extrusion — Part 2: Preparation of test specimen and determination of properties
2015-12-18
(Revision of ISO 14910-2:2013)
ISO/DIS 20557-1
*
Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 1: Designation system and basis for specifications
2015-12-18
(Revision of ISO 28941-1:2008)
ISO/DIS 20557-2
*
Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 2:
Preparation of test specimen and determination of properties
2015-12-18
(Revision of ISO 15103-2:2007)
ISO/DIS 20558-1
*
Plastics — Poly(phenylene sulfide) (PPS) moulding and extrusion materials — Part 1:
Designation system and basis for specifications
2015-12-19
(Revision of ISO 28078-1:2009)
ISO/DIS 20558-2
*
Plastics — Poly(phenylene sulfide) (PPS) moulding and extrusion materials — Part 2:
Preparation of test specimen and determination of properties
2015-12-19
(Revision of ISO 28078-2:2009)
TC 67
ISO/DIS 18797-1
ISO/DIS 10418
Materials, equipment and offshore structures for petroleum, petrochemical
and natural gas industries
*
*
Petroleum, petrochemicals and natural gas industries — External corrosion protection of
risers by coatings and linings — Part 1: Elastomeric coating systems — Polychloroprene
or EPDM
Petroleum and natural gas industries — Offshore production installations — Process safety systems
2015-12-15
2015-12-25
(Revision of ISO 10418:2003, ISO 10418:2003/Cor 1:2008)
TC 71
ISO/DIS 19044
Concrete, reinforced concrete and pre-stressed concrete
*
TC 72
ISO/DIS 96-1
Test methods for fibre-reinforced cementitious composites — Load-displacement curve
using notched specimen
2015-12-10
Textile machinery and accessories
*
Textile machinery and accessories — Rings and travellers for ring spinning and ring twisting frames — Part 1: Flange rings T and SF and their travellers
(Revision of ISO 96-1:2009)
TC 84
ISO/DIS 7886-1
Devices for administration of medicinal products and catheters
*
Sterile hypodermic syringes for single use — Part 1: Syringes for manual use
2015-12-11
(Revision of ISO 7886-1:1993, ISO 7886-1:1993/Cor 1:1995)
TC 85
ISO/DIS 12183
Nuclear energy, nuclear technologies, and radiological protection
*
Nuclear fuel technology — Controlled-potential coulometric assay of plutonium
(Revision of ISO 12183:2005)
TC 92
ISO/DIS 3008-3
Fire safety
*
Fire Resistance Test — Door and Shutter Assemblies — Part 3: Horizontally oriented
2015-12-15
TC 96
ISO
4305:2014/DAmd
Cranes
*
Mobile cranes — Determination of stability — Amendment 1
2015-12-03
1
TC 102
ISO/DIS 16878
Iron ore and direct reduced iron
*
Iron ores — Determination of metallic iron content — Iron(III) chloride titrimetric method
2015-12-18
(Revision of ISO/TS 16878:2010)
TC 104
ISO 14961:2013/DAmd 1
Freight containers
*
TC 106
ISO/DIS 13078-2
2015-12-10
Dentistry
*
TC 107
ISO/DIS 19207
Series 1 freight containers — Specification and testing — Part 1: General cargo containers
for general purposes — Amendment 1
Dentistry — Dental furnace — Part 2: Test method for evaluation of furnace programme
via firing glaze
2015-12-04
Metallic and other inorganic coatings
*
Thermal spraying — Classification method of adhesive strength by indentation
2015-12-23
TC 108
ISO/DIS 20816-1
Mechanical vibration, shock and condition monitoring
*
Mechanical vibration - Measurement and evaluation of machine vibration — Part 1: General Guidelines
2015-12-25
(Revision of ISO 7919-1:1996, ISO 10816-1:1995, ISO 10816-1:1995/Amd 1:2009)
ISO/DIS 2194011
*
Mechanical vibration — Rotor balancing — Part 11: Procedures and tolerances for rotors
with rigid behaviour
2015-12-25
(Revision of ISO 1940-1:2003, ISO 1940-1:2003/Cor 1:2005)
ISO/DIS 29821-2
*
TC 118
2015-12-16
Compressors and pneumatic tools, machines and equipment
ISO 289271:2009/DAmd 1
*
ISO
1217:2009/DAmd
1
*
TC 130
ISO/DIS 18620
Condition monitoring and diagnostics of machines — Ultrasound — Part 2: Procedures
and validation
Hand-held portable power tools — Test methods for evaluation of vibration emission —
Part 1: Angle and vertical grinders — Amendment 1: Cupped wire brushes
2015-12-25
Displacement compressors — Acceptance tests — Amendment 1: Calculation of isentropic efficiency and relationship with specific energy
2015-12-16
Graphic technology
*
Graphic technology — Prepress data exchange — Tone adjustment curves exchange
2015-12-15
TC 150
ISO 72064:2010/DAmd 1
Implants for surgery
*
TC 160
ISO/DIS 12540
Implants for surgery — Partial and total hip joint prostheses — Part 4: Determination of
endurance properties and performance of stemmed femoral components — Amendment 1
2015-12-16
Glass in building
*
Glass in building — Thermally tempered (thermally toughened) soda lime silicate safety
glass
2015-12-08
ISO/DIS 20657
*
Glass in building — Heat soaked tempered safety glass
2015-12-25
TC 163
ISO/DIS 18393-1
Thermal performance and energy use in the built environment
*
Thermal insulation products — Determination of ageing by settlement — Part 1: Blown
loose-fill insulation for ventilated attics
2015-12-04
(Revision of ISO 18393-1:2012)
TC 164
ISO/DIS 1099
Mechanical testing of metals
*
Metallic materials — Fatigue testing — Axial force-controlled method
2015-12-30
(Revision of ISO 1099:2006)
TC 165
ISO/DIS 18402
Timber structures
*
Timber Structures — Structural Insulated Panel roof construction — Test methods
2015-12-18
TC 168
ISO/DIS 29783-3
Prosthetics and orthotics
*
TC 171
ISO/DIS 19444-1
Prosthetics and orthotics — Vocabulary — Part 3: Pathological gait (excluding prosthetic
gait)
2015-12-25
Document management applications
*
Document management — XML forms data format — Part 1: XFDF 3.0
2015-12-04
TC 172
ISO/DIS 14133-1
Optics and photonics
*
Optics and photonics — Specifications for binoculars, monoculars and spotting scopes —
Part 1: General purpose instruments
2015-12-18
(Revision of ISO 14133-1:2006)
ISO/DIS 14133-2
*
Optics and photonics — Specifications for binoculars, monoculars and spotting scopes —
Part 2: High performance instruments
2015-12-18
(Revision of ISO 14133-2:2006)
ISO/DIS 14490-7
*
Optics and photonics — Test methods for telescopic systems — Part 7: Test methods for
limit of resolution
2015-12-16
(Revision of ISO 14490-7:2005)
ISO/DIS 16331-1
*
Optics and optical instruments — Laboratory procedures for testing surveying and construction instruments — Part 1: Performance of handheld laser distance meters
2015-12-08
(Revision of ISO 16331-1:2012)
TC 173
ISO/DIS 16840-2
Assistive products for persons with disability
*
Wheelchair seating — Part 2: Determination of physical and mechanical characteristics of
devices intended to manage tissue integrity — Seat cushions
(Revision of ISO 16840-2:2007)
2015-12-03
ISO/DIS 12505-2
*
TC 182
*
ISO/DIS 2247710.2
*
*
*
Industrial automation systems and integration — Standardized procedures for production
systems engineering — Part 2: Reference process for seamless production planning
2015-12-08
Small craft — Determination of maximum propulsion power rating using manoeuvring
speed — Part 2: Craft with a length of hull between 8 m and 24 m
2015-12-18
Soil quality
*
*
TC 198
ISO/DIS 11138-1
2015-11-04
Small craft
TC 190
ISO/DIS 16751
Geotechnical investigation and testing — Testing of geotechnical structures — Part 10:
Testing of piles: rapid load testing
Automation systems and integration
TC 188
ISO/DIS 14869-3
Geotechnical investigation and testing — Field testing — Part 15: Measuring while drilling
2015-11-04
TC 184
ISO/DIS 11592-2
2015-12-12
Geotechnics
ISO/DIS 2247615.2
ISO/DIS 18828-2
Skin barrier for ostomy aids — Test methods — Part 2: Wet-integrity and adhesive
strength
Soil quality — Dissolution for the determination of total element content — Part 3: Dissolution with hydrofluoric, hydrochloric and nitric acids using pressurised microwave technique
Soil quality — Environmental availability of non-polar organic compounds — Determination
of the potential bioavailable fraction and the non-bioavailable fraction using a strong adsorbent or complexing agent
2015-12-03
2015-12-23
Sterilization of health care products
*
Sterilization of health care products — Biological indicators — Part 1: General requirements
2015-12-18
(Revision of ISO 11138-1:2006)
ISO/DIS 11138-2
*
Sterilization of health care products — Biological indicators — Part 2: Biological indicators
for ethylene oxide sterilization processes
2015-12-18
(Revision of ISO 11138-2:2006)
ISO/DIS 11138-3
*
Sterilization of health care products — Biological indicators — Part 3: Biological indicators
for moist heat sterilization processes
2015-12-18
(Revision of ISO 11138-3:2006)
ISO/DIS 11138-4
*
Sterilization of health care products — Biological indicators — Part 4: Biological indicators
for dry heat sterilization processes
2015-12-18
(Revision of ISO 11138-4:2006)
ISO/DIS 11138-5
*
Sterilization of health care products — Biological indicators — Part 5: Biological indicators
for low-temperature steam and formaldehyde sterilization processes
2015-12-18
(Revision of ISO 11138-5:2006)
TC 202
ISO/DIS 16700
Microbeam analysis
*
Microbeam analysis — Scanning electron microscopy — Guidelines for calibrating image
magnification
2015-12-17
(Revision of ISO 16700:2004)
TC 204
ISO/DIS 16787
ISO/DIS 18682
Intelligent transport systems
*
*
TC 205
ISO/DIS 16813
Intelligent Transport Systems — Assisted Parking System (APS) - Performance requirements and test procedures
2015-12-29
Intelligent transport systems — External hazard detection and notification systems —
Basic requirements
Building environment design
*
Building environment design — Indoor environment — General principles
2015-12-30
(Revision of ISO 16813:2006)
ISO/DIS 16817
*
Building environment design — Indoor environment — Design process for visual environment
2015-12-15
(Revision of ISO 16817:2012)
TC 206
ISO/DIS 17562
Fine ceramics
*
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for linear
thermal expansion of monolithic ceramics by push-rod technique
(Revision of ISO 17562:2001)
ISO/DIS 19635
*
TC 207
ISO
14024:1999/DAm
d1
2015-12-15
Environmental management
*
TC 215
ISO/DIS 25237
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for
antialgal activity of semiconducting photocatalytic materials
Environmental labels and declarations — Type I environmental labelling — Principles and
procedures — Amendment 1
2015-12-25
Health informatics
*
Health informatics — Pseudonymisation
2015-12-04
TC 219
ISO/DIS 20253
Floor coverings
*
Textile floor coverings — Blade test — Flocked textile floor covering with pile
2015-12-04
TC 238
ISO/DIS 18847
Solid biofuels
*
Solid biofuels — Determination of particle density of pellets and briquettes
2015-12-25
TC 282
ISO/DIS 16075-4
Water re-use
*
Guidelines for treated wastewater use for irrigation projects — Part 4: Monitoring
2015-12-24
JTC 1
Information technology
ISO/IEC DIS
13157-2
*
ISO/IEC DIS
13157-3
*
ISO/IEC DIS
13157-4
*
ISO/IEC DIS
13157-5
*
ISO/IEC DIS
29341-1-2
*
ISO/IEC DIS
29341-20-1
*
ISO/IEC DIS
29341-20-2
*
ISO/IEC DIS
29341-20-3
*
ISO/IEC DIS
29341-20-4
*
ISO/IEC DIS
29341-24-1
*
ISO/IEC DIS
29341-24-2
*
ISO/IEC DIS
29341-24-3
*
ISO/IEC DIS
29341-25-1
*
ISO/IEC DIS
29341-25-2
*
ISO/IEC DIS
29341-25-3
*
ISO/IEC DIS
29341-25-4
*
ISO/IEC DIS
29341-26-1
*
ISO/IEC DIS
29341-26-2
*
Information technology — Telecommunications and information exchange between systems — NFC Security — Part 2: NFC-SEC cryptography standard using ECDH and AES
2015-12-15
Information technology — Telecommunications and information exchange between systems — NFC Security — Part 3: NFC-SEC cryptography standard using ECDH-256 and
AES-GCM
2015-12-15
Information technology — Telecommunications and information exchange between systems — NFC Security — Part 4: NFC-SEC entity authentication and key agreement using
asymmetric cryptography
2015-12-15
Information technology — Telecommunications and information exchange between systems — NFC Security — Part 5: NFC-SEC entity authentication and key agreement using
symmetric cryptography
2015-12-15
Information technology — UPnP Device Architecture — Part 1-2: UPnP Device Architecture Version 2.0
2015-12-22
Information technology — UPnP Device Architecture — Part 20-1: Audio video device
control protocol — Level 4 — Audio video architecture
2015-12-04
Information technology — UPnP Device Architecture — Part 20-2: Audio video device
control protocol — Level 4 — Media renderer device
2015-12-04
Information technology — UPnP Device Architecture — Part 20-3: Audio video device
control protocol — Level 4 — Media server device
2015-12-04
Information technology — UPnP Device Architecture — Part 20-4: Audio video device
control protocol — Level 4 — Datastructure template
2015-12-04
Information technology — UPnP Device Architecture — Part 24-1: Internet gateway device
control protocol — Level 2 — Internet gateway device
2015-12-04
Information technology — UPnP Device Architecture — Part 24-2: Internet gateway device
control protocol — Level 2 — Wide area network connection device
2015-12-04
Information technology — UPnP Device Architecture — Part 24-3: Internet gateway device
control protocol — Level 2 — Wide area network device
2015-12-04
Information technology — UPnP Device Architecture — Part 25-1: Telephony device control protocol — Telephony architecture
2015-12-04
Information technology — UPnP Device Architecture — Part 25-2: Telephony device control protocol — Telephony security best practice
2015-12-04
Information technology — UPnP Device Architecture — Part 25-3: Telephony device control protocol — Telephony client device
2015-12-04
Information technology — UPnP Device Architecture — Part 25-4: Telephony device control protocol — Telephony server device
2015-12-04
Information technology — UPnP Device Architecture — Part 26-1: Telephony device control protocol — Level 2 — Telephony architecture
2015-12-04
Information technology — UPnP Device Architecture — Part 26-2: Telephony device control protocol — Level 2 — Telephony client device
2015-12-04
ISO/IEC DIS
29341-26-3
*
ISO/IEC DIS
29341-27-1
*
ISO/IEC DIS
29341-28-1
*
ISO/IEC DIS
29341-28-2
*
ISO/IEC DIS
29341-29-2
*
ISO/IEC DIS
29341-30-1
*
ISO/IEC DIS
29341-30-2
*
ISO/IEC DIS
29341-31-1
*
ISO/IEC DIS
29341-20-10
*
ISO/IEC DIS
29341-20-11
*
ISO/IEC DIS
29341-20-12
*
ISO/IEC DIS
29341-20-13
*
ISO/IEC DIS
29341-20-14
*
ISO/IEC DIS
29341-24-10
*
ISO/IEC DIS
29341-24-11
*
ISO/IEC DIS
29341-25-10
*
ISO/IEC DIS
29341-25-11
*
ISO/IEC DIS
29341-25-12
*
Information technology — UPnP Device Architecture — Part 26-3: Telephony device control protocol — Level 2 — Telephony server device
2015-12-04
Information technology — UPnP Device Architecture — Part 27-1: Friendly device control
protocol — Friendly information update service
2015-12-04
Information technology — UPnP Device Architecture — Part 28-1: Multiscreen device
control protocol — Multiscreen architecture
2015-12-04
Information technology — UPnP Device Architecture — Part 28-2: Multiscreen device
control protocol — Screen device
2015-12-04
Information technology — UPnP Device Architecture — Part 29-2: Multiscreen device
control protocol — Level 2 — Screen device
2015-12-04
Information technology — UPnP Device Architecture — Part 30-1: Sensor management
device control protocol — Sensor management architecture
2015-12-04
Information technology — UPnP Device Architecture — Part 30-2: Sensor management
device control protocol — Sensor management device
2015-12-04
Information technology — UPnP Device Architecture — Part 31-1: Energy management
device control protocol — Energy management service
2015-12-23
Information technology — UPnP Device Architecture — Part 20-10: Audio video device
control protocol — Level 4 — Audio video transport service
2015-12-04
Information technology — UPnP Device Architecture — Part 20-11: Audio video device
control protocol — Level 4 — Connection manager service
2015-12-04
Information technology — UPnP Device Architecture — Part 20-12: Audio video device
control protocol — Level 4 — Content directory service
2015-12-04
Information technology — UPnP Device Architecture — Part 20-13: Audio video device
control protocol — Level 4 — Rendering control service
2015-12-04
Information technology — UPnP Device Architecture — Part 20-14: Audio video device
control protocol — Level 4 — Scheduled recording service
2015-12-04
Information technology — UPnP Device Architecture — Part 24-10: Internet gateway device control protocol — Level 2 — Wide area network internet protocol — Connection
service
2015-12-04
Information technology — UPnP Device Architecture — Part 24-11: Internet gateway device control protocol — Level 2 — Wide area network internet protocol v6 — Firewall control service
2015-12-04
Information technology — UPnP Device Architecture — Part 25-10: Telephony device
control protocol — Call management service
2015-12-04
Information technology — UPnP Device Architecture — Part 25-11: Telephony device
control protocol — Input configuration service
2015-12-04
Information technology — UPnP Device Architecture — Part 25-12: Telephony device
control protocol — Media management service
2015-12-04
ISO/IEC DIS
29341-25-13
*
ISO/IEC DIS
29341-25-14
*
ISO/IEC DIS
29341-26-10
*
ISO/IEC DIS
29341-26-11
*
ISO/IEC DIS
29341-26-12
*
ISO/IEC DIS
29341-26-13
*
ISO/IEC DIS
29341-26-14
*
ISO/IEC DIS
29341-26-15
*
ISO/IEC DIS
29341-26-16
*
ISO/IEC DIS
29341-28-10
*
ISO/IEC DIS
29341-29-10
*
ISO/IEC DIS
29341-30-10
*
ISO/IEC DIS
29341-30-11
*
ISO/IEC DIS
29341-30-12
*
ISO/IEC DIS
7816-8.2
Information technology — UPnP Device Architecture — Part 25-13: Telephony device
control protocol — Messaging service
2015-12-04
Information technology — UPnP Device Architecture — Part 25-14: Telephony device
control protocol — Phone management service
2015-12-04
Information technology — UPnP Device Architecture — Part 26-10: Telephony device
control protocol — Level 2 — Call management service
2015-12-04
Information technology — UPnP Device Architecture — Part 26-11: Telephony device
control protocol — Level 2 — Media management service
2015-12-04
Information technology — UPnP Device Architecture — Part 26-12: Telephony device
control protocol — Level 2 — Messaging service
2015-12-04
Information technology — UPnP Device Architecture — Part 26-13: Telephony device
control protocol — Level 2 — Phone management service
2015-12-04
Information technology — UPnP Device Architecture — Part 26-14: Telephony device
control protocol — Level 2 — Address book service
2015-12-04
Information technology — UPnP Device Architecture — Part 26-15: Telephony device
control protocol — Level 2 — Calendar service
2015-12-04
Information technology — UPnP Device Architecture — Part 26-16: Telephony device
control protocol — Level 2 — Presence service
2015-12-04
Information technology — UPnP Device Architecture — Part 28-10: Multiscreen device
control protocol — Application management service
2015-12-04
Information technology — UPnP Device Architecture — Part 29-10: Multiscreen device
control protocol — Level 2 — Application management service
2015-12-04
Information technology — UPnP Device Architecture — Part 30-10: Sensor management
device control protocol — Data store service
2015-12-04
Information technology — UPnP Device Architecture — Part 30-11: Sensor management
device control protocol — Sensor data model service
2015-12-04
Information technology — UPnP Device Architecture — Part 30-12: Sensor management
device control protocol — Sensor transport generic service
2015-12-04
Identification cards — Integrated circuit cards — Part 8: Commands and mechanisms for
security operations
2015-11-29
(Revision of ISO/IEC 7816-8:2004)
ISO/IEC DIS
18598
*
ISO/IEC DIS
11770-6
*
ISO/IEC
18031:2011/DAm
*
Information technology — Automated infrastructure management (AIM) systems — Requirements, data exchange and applications
2015-12-30
Information technology — Security techniques — Key management — Part 6: Key derivation
2015-12-08
Information technology — Security techniques — Random bit generation — Amendment
1: Test vectors for deterministic random bit generation
2015-12-10
d1
ISO/IEC DIS
18367
*
ISO/IEC DIS
18370-1
*
ISO/IEC DIS
27011
*
Information technology — Security techniques — Cryptographic algorithms and security
mechanisms conformance testing
2015-12-15
Information technology — Security techniques — Blind digital signatures — Part 1: General
2015-12-23
Information technology — Security techniques — Code of practice for Information security
controls based on ISO/IEC 27002 for telecommunications organizations
2015-12-08
(Revision of ISO/IEC 27011:2008)
ISO/IEC DIS
19798
*
Method for the determination of toner cartridge yield for colour printers and multi-function
devices that contain printer components
2015-12-25
(Revision of ISO/IEC 19798:2007)
ISO/IEC 138181:2015/DAmd 5
*
ISO/IEC 1449626:2010/DAmd 4
*
ISO/IEC DIS
21000-20
*
Information technology — Generic coding of moving pictures and associated audio information — Part 1: Systems — Amendment 5: Carriage of MPEGH 3D audio over MPEG2
systems
2015-12-26
Information technology — Coding of audio-visual objects — Part 26: Audio conformance
— Amendment 4: AAC Additional Multichannel Conformance Data
2015-12-22
Information technology — Multimedia framework (MPEG-21) — Part 20: Contract Expression Language
2015-12-22
(Revision of ISO/IEC 21000-20:2013)
ISO/IEC DIS
21000-21
*
Information technology — Multimedia framework (MPEG-21) — Part 21: Media Contract
Ontology
2015-12-22
(Revision of ISO/IEC 21000-21:2013, ISO/IEC 21000-21:2013/Cor 1:2015)
ISO/IEC DIS
21000-22
*
ISO/IEC DIS
23000-13
*
Information technology — Multimedia framework (MPEG-21) — Part 22: User Description
2015-12-22
Information technology - Multimedia application format (MPEG-A) — Part 13: Augmented
reality application format
2015-12-29
(Revision of ISO/IEC 23000-13:2014, ISO/IEC 23000-13:2014/Amd 1:2015)
ISO/IEC 230033:2012/DAmd 3
*
ISO/IEC DIS
23008-4
*
ISO/IEC DIS
18305
*
ISO/IEC DIS
30116
*
Information technology — MPEG audio technologies — Part 3: Unified speech and audio
coding — Amendment 3: Support of MPEG-D DRC
2015-12-29
Information technology — High efficiency coding and media delivery in heterogeneous
environments — Part 4: MMT Reference and Conformance Software
2015-12-22
Information technology — Real time locating systems — Test and evaluation of localization and tracking systems
2015-12-11
Information technology — Automatic identification and data capture techniques — Optical
Character Recognition (OCR) quality testing
FDIS circulated
Period from 01 September to 30 September 2015
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
IIW
ISO/FDIS 14270
International Institute of Welding
*
Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
2015-11-11
(Revision of ISO 14270:2000)
ISO/FDIS 14272
*
Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds
2015-11-04
(Revision of ISO 14272:2000)
ISO/FDIS 14273
*
Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for tensile shear testing resistance spot, seam and embossed projection welds
2015-11-11
(Revision of ISO 14273:2000)
TC 6
ISO/FDIS 110935
Paper, board and pulps
*
Paper and board — Testing of cores — Part 5: Determination of characteristics of concentric rotation
2015-11-26
(Revision of ISO 11093-5:2009, ISO 11093-5:2009/Cor 1:2010)
TC 17
ISO/FDIS 17577
Steel
*
Steel — Ultrasonic testing for steel flat products of thickness equal to or greater than 6
mm
2015-11-10
(Revision of ISO 17577:2006)
TC 20
ISO/FDIS 9667
Aircraft and space vehicles
*
Aircraft ground support equipment — Tow bars
2015-11-24
(Revision of ISO 9667:1998)
ISO/FDIS 19281
*
Air cargo — Fire resistant containers — Design, performance and testing requirements
2015-11-21
TC 22
ISO/FDIS 23013
Road vehicles
*
TC 23
2015-11-16
Tractors and machinery for agriculture and forestry
ISO/FDIS 425414
*
ISO
11850:2011/FDA
md 1
*
ISO/FDIS 18564
*
Agricultural machinery — Safety — Part 14: Bale wrappers
2015-11-18
Machinery for forestry — General safety requirements — Amendment 1
2015-11-18
TC 29
ISO/FDIS 7388-3
Road vehicles — Determination to forced entry of safety glass constructions used in vehicle glazing — Test of glazing systems
Machinery for forestry — Noise test code
Small tools
*
Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs of
forms AD, AF, UC, UD, UF, JD and JF
(Revision of ISO 7388-3:2013)
TC 35
ISO/FDIS 4628-1
Paints and varnishes
*
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity
and size of defects, and of intensity of uniform changes in appearance — Part 1: General
introduction and designation system
2015-11-18
(Revision of ISO 4628-1:2003)
ISO/FDIS 4628-2
*
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity
and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering
2015-11-18
(Revision of ISO 4628-2:2003)
ISO/FDIS 4628-3
*
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity
and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting
2015-11-18
(Revision of ISO 4628-3:2003)
ISO/FDIS 4628-4
*
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity
and size of defects, and of intensity of uniform changes in appearance — Part 4: Assessment of degree of cracking
2015-11-18
(Revision of ISO 4628-4:2003)
ISO/FDIS 4628-5
*
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity
and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking
2015-11-18
(Revision of ISO 4628-5:2003)
ISO/FDIS 4628-7
*
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity
and size of defects, and of intensity of uniform changes in appearance — Part 7: Assessment of degree of chalking by velvet method
2015-11-18
(Revision of ISO 4628-7:2003)
ISO/FDIS 462810
*
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity
and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion
(Revision of ISO 4628-10:2003)
TC 38
Textiles
2015-11-18
ISO/FDIS 177511
*
ISO/FDIS 177512
*
ISO/FDIS 178811
*
ISO/FDIS 178812
*
TC 39
ISO/FDIS 230-10
Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibers and their
blends — Part 1: Light Microscopy method
2015-11-11
Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibers and their
blends — Part 2: Scanning Electron Microscopy method
2015-11-11
Textiles — Determination of certain flame retardants — Part 1: Brominated flame retardants
2015-11-11
Textiles — Determination of certain flame retardants — Part 2: Phosphorus flame retardants
2015-11-11
Machine tools
*
Test code for machine tools — Part 10: Determination of the measuring performance of
probing systems of numerically controlled machine tools
2015-11-24
(Revision of ISO 230-10:2011, ISO 230-10:2011/Amd 1:2014)
TC 43
ISO/FDIS 6926
Acoustics
*
Acoustics — Requirements for the performance and calibration of reference sound
sources used for the determination of sound power levels
2015-11-25
(Revision of ISO 6926:1999)
TC 48
ISO/FDIS 3819
Laboratory equipment
*
Laboratory glassware — Beakers
2015-11-04
(Revision of ISO 3819:1985)
ISO/FDIS 4796-1
*
Laboratory glassware — Bottles — Part 1: Screw-neck bottles
2015-11-11
(Revision of ISO 4796-1:2000)
ISO/FDIS 4797
*
Laboratory glassware — Boiling flasks with conical ground joints
2015-11-11
(Revision of ISO 4797:2004)
ISO/FDIS 16496
*
Laboratory glassware — Vacuum-jacketed vessels for heat insulation
2015-11-18
TC 59
ISO/FDIS 19863
Buildings and civil engineering works
*
Buildings and civil engineering works — Sealants — Determination of tear resistance
2015-11-21
TC 85
ISO/FDIS 7503-1
Nuclear energy, nuclear technologies, and radiological protection
*
Measurement of radioactivity - Measurement and evaluation of surface contamination —
Part 1: General principles
2015-11-18
(Revision of ISO 7503-1:1988)
ISO/FDIS 7503-2
*
Measurement of radioactivity - Measurement and evaluation of surface contamination —
Part 2: Test method using wipe-test samples
2015-11-18
(Revision of ISO 7503-2:1988)
ISO/FDIS 116659
*
ISO/FDIS 166381
*
TC 89
ISO/FDIS 124604
Measurement of radioactivity in the environment — Air: radon-222 — Part 9: Method for
determining exhalation rate of dense building materials
2015-11-22
Radiological protection - Monitoring and internal dosimetry for specific materials — Part 1:
Inhalation of uranium compounds
2015-11-16
Wood-based panels
*
Wood-based panels — Determination of formaldehyde release — Part 4: Desiccator
method
2015-11-25
(Revision of ISO 12460-4:2008, ISO 12460-4:2008/Amd 1:2011)
TC 94
Personal safety -- Protective clothing and equipment
ISO 174914:2008/FDAmd 1
*
ISO/FDIS 119999
*
TC 96
ISO/FDIS 8566-2
Protective clothing — Test methods for clothing providing protection against chemicals —
Part 4: Determination of resistance to penetration by a spray of liquid (spray test) —
Amendment 1
2015-11-17
PPE for firefighters — Test methods and requirements for PPE used by firefighters who
are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in
structures — Part 9: Fire hoods
2015-11-24
Cranes
*
Cranes — Cabins and control stations — Part 2: Mobile cranes
2015-11-24
(Revision of ISO 8566-2:1995)
ISO/FDIS 9926-3
*
Cranes — Training of operators — Part 3: Tower cranes
2015-11-21
(Revision of ISO 9926-3:2005)
TC 106
ISO/FDIS 9693-2
Dentistry
*
Dentistry — Compatibility testing — Part 2: Ceramic-ceramic systems
2015-11-11
(Revision of ISO 9693:1999, ISO 9693:1999/Amd 1:2005)
TC 107
ISO/FDIS 28765
Metallic and other inorganic coatings
*
Vitreous and porcelain enamels — Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
2015-11-18
(Revision of ISO 28765:2008)
TC 108
ISO/FDIS 133732
Mechanical vibration, shock and condition monitoring
*
Condition monitoring and diagnostics of machines — Vibration condition monitoring —
Part 2: Processing, analysis and presentation of vibration data
2015-11-30
(Revision of ISO 13373-2:2005)
TC 113
ISO/FDIS 24155
Hydrometry
*
Hydrometry — Hydrometric data transmission systems — Specification of system requirements
(Revision of ISO/TS 24155:2007)
2015-11-21
TC 121
ISO/FDIS 11197
Anaesthetic and respiratory equipment
*
Medical supply units
2015-11-25
(Revision of ISO 11197:2004)
TC 146
ISO/FDIS 17733
Air quality
*
Workplace air — Determination of mercury and inorganic mercury compounds — Method
by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry
2015-11-12
(Revision of ISO 17733:2004)
TC 149
ISO/FDIS 6695
Cycles
*
Cycles — Pedal axle and crank assembly with square end fitting — Assembly dimensions
2015-11-08
(Revision of ISO 6695:1991)
TC 156
ISO/FDIS 21207
Corrosion of metals and alloys
*
Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate
exposure to corrosion-promoting gases, neutral salt-spray and drying
2015-11-05
(Revision of ISO 21207:2004, ISO 21207:2004/Cor 1:2008)
TC 159
ISO/FDIS 9241391
Ergonomics
*
TC 172
ISO/FDIS 103221
Ergonomics of human-system interaction — Part 391: Requirements, analysis and compliance test methods for the reduction of photosensitive seizures
2015-11-18
Optics and photonics
*
Ophthalmic optics — Semi-finished spectacle lens blanks — Part 1: Specifications for
single-vision and multifocal lens blanks
2015-11-25
(Revision of ISO 10322-1:2006)
ISO/FDIS 150042
*
Ophthalmic instruments — Fundamental requirements and test methods — Part 2: Light
hazard protection
2015-11-25
(Revision of ISO 15004-2:2007)
TC 173
ISO/FDIS 17966
Assistive products for persons with disability
*
TC 182
ISO/FDIS 178923
Assistive products for personal hygiene that support users — Requirements and test
methods
2015-11-16
Geotechnics
*
Geotechnical investigation and testing — Laboratory testing of soil — Part 3: Determination of particle density
2015-11-04
(Revision of ISO/TS 17892-3:2004, ISO/TS 17892-3:2004/Cor 1:2006)
TC 190
ISO/FDIS 17601
ISO/FDIS 18311
Soil quality
*
*
Soil quality — Estimation of abundance of selected microbial gene sequences by quantitative realtime PCR from DNA directly extracted from soil
Soil quality — Method for testing effects of soil contaminants on the feeding activity of soil
2015-11-21
dwelling organisms — Bait-lamina test
TC 204
2015-11-10
Intelligent transport systems
ISO/FDIS 174381
*
ISO/FDIS 175751
*
Intelligent transport systems — Indoor navigation for personal and vehicle ITS station —
Part 1: General information and use cases definition
2015-11-30
Electronic fee collection — Application interface definition for autonomous systems —
Part 1: Charging
2015-11-11
(Revision of ISO/TS 17575-1:2010, ISO/TS 17575-1:2010/Cor 1:2013)
ISO/FDIS 175752
*
Electronic fee collection — Application interface definition for autonomous systems —
Part 2: Communication and connection to the lower layers
2015-11-11
(Revision of ISO/TS 17575-2:2010)
ISO/FDIS 175753
*
Electronic fee collection — Application interface definition for autonomous systems —
Part 3: Context data
2015-11-11
(Revision of ISO/TS 17575-3:2011, ISO/TS 17575-3:2011/Cor 1:2013)
TC 213
ISO/FDIS 174503
Dimensional and geometrical product specifications and verification
*
Geometrical product specifications (GPS) — General concepts — Part 3: Toleranced
features
2015-11-18
(Revision of ISO 14660-2:1999)
TC 215
ISO/IEEE FDIS
11073-10419
Health informatics
*
TC 217
ISO/FDIS 161281.2
Cosmetics
*
TC 219
ISO/FDIS 18168
Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients and products — Part 1: Definitions for ingredients
2015-11-08
Floor coverings
*
JTC 1
ISO/IEC FDIS
15149-3
Health informatics — Personal health device communication — Part 10419: Device specialization — Insulin pump
Textile floor coverings — Colour fastness to shampooing
Information technology
*
Information technology — Telecommunications and information exchange between systems — Magnetic field area network (MFAN) — Part 3: Relay Protocol for Extended
Range
2015-11-17
(Revision of ISO/IEC 15149:2011)
ISO/IEC FDIS
15149-4
*
Information technology — Telecommunications and information exchange between systems — Magnetic field area network (MFAN) — Part 4: Security Protocol for Authentication
2015-11-17
(Revision of ISO/IEC 15149:2011)
ISO/IEC FDIS
26551
*
Software and systems engineering — Tools and methods for product line requirements
engineering
(Revision of ISO/IEC 26551:2012)
2015-11-03
ISO/IEC 1449627:2009/FDAmd
6
*
ISO/IEC FDIS
23001-8
*
Information technology — Coding of audio-visual objects — Part 27: 3D Graphics conformance — Amendment 6: Pattern-based 3D mesh coding conformance
2015-11-17
Information technology — MPEG systems technologies — Part 8: Coding-independent
code points
2015-11-24
(Revision of ISO/IEC 23001-8:2013, ISO/IEC 23001-8:2013/Amd 1:2015, ISO/IEC 230018:2013/DAmd 2, ISO/IEC 23001-8:2013/Cor 1:2015)
ISO/IEC FDIS
23001-12
*
Information technology — MPEG systems technologies — Part 12: Sample variants in the
ISO base media file format
2015-11-05
Information technology — Database languages — SQL multimedia and application packages — Part 3: Spatial
ISO/IEC FDIS
13249-3
(Revision of ISO/IEC 13249-3:2011)
Information technology — Document Schema Definition Languages (DSDL) — Part 3:
Rule-based validation — Schematron
ISO/IEC FDIS
19757-3
(Revision of ISO/IEC 19757-3:2006)
ISO/IEC FDIS
29794-1
*
Information technology — Biometric sample quality — Part 1: Framework
2015-11-17
(Revision of ISO/IEC 29794-1:2009)
Standards published
New International Standards published between 01 September and 30 September 2015
* Available in English only
** French version of standard previously published in English only
Price group
PC 248
ISO
13065:2015
Sustainability criteria for bioenergy
*
G
TC 4
ISO 104:2015
Sustainability criteria for bioenergy
Rolling bearings
*
Rolling bearings — Thrust bearings — Boundary dimensions, general plan
D
TC 8
Ships and marine technology
ISO 6218:2015
Inland navigation vessels — Manually- and power-operated coupling devices for pushing
units and coupled vessels — Safety requirements and main dimensions
ISO 6042:2015
*
C
Ships and marine technology — Weathertight single-leaf steel doors
B
ISO
17939:2015
*
ISO
17940:2015
*
Ships and marine technology — Oil tank hatches
C
Ships and marine technology — Hinged watertight doors
B
TC 17
Steel
ISO
16574:2015
*
ISO 4990:2015
*
Determination of percentage of resolvable pearlite in high carbon steel wire rod
A
Steel castings — General technical delivery requirements
C
ISO 4993:2015
*
Steel and iron castings — Radiographic testing
C
ISO 9477:2015
*
High strength cast steels for general engineering and structural purposes
A
ISO
11972:2015
*
ISO
11973:2015
*
ISO 135831:2015
*
ISO 135832:2015
*
ISO
19960:2015
*
B
Heat-resistant cast steels and alloys for general applications
A
Centrifugally cast steel and alloy products — Part 1: General testing and tolerances
B
Centrifugally cast steel and alloy products — Part 2: Heat-resistant materials
B
Cast steels and alloys with special physical properties
B
TC 20
Aircraft and space vehicles
ISO
19631:2015
*
ISO
16679:2015
*
ISO/TR
19473:2015
*
TC 22
Corrosion-resistant cast steels for general applications
Aerospace series — Tube fittings for fluid systems, 5 080 psi (35 000 kPa) — Qualification
specification
D
Space systems — Relative motion analysis elements after LV/SC separation
B
Space systems — Best practices for orbit elements at payload — LV separation
B
Road vehicles
ISO 88203:2015
*
ISO 64694:2015
*
TC 23
ISO 5131:2015
ISO 7216:2015
Road vehicles — Fuse-links — Part 3: Fuse-links with tabs (blade type) Type C (medium),
Type E (high current) and Type F (miniature)
C
Electrically propelled road vehicles — Safety specifications — Part 4: Post crash electrical
safety
C
Tractors and machinery for agriculture and forestry
*
*
Tractors for agriculture and forestry — Measurement of noise at the operator's position —
Survey method
C
Agricultural and forestry tractors — Measurement of noise emitted when in motion
A
ISO 162301:2015
Agricultural machinery and tractors — Safety of higher voltage electrical and electronic
components and systems — Part 1: General requirements
C
ISO 162312:2015
Self-propelled agricultural machinery — Assessment of stability — Part 2: Determination of
static stability and test procedures
D
ISO 1178310:2015
Tractors and machinery for agriculture and forestry — Serial control and communications
data network — Part 10: Task controller and management information system data interchange
TC 27
Solid mineral fuels
ISO 5074:2015
*
H
Hard coal — Determination of Hardgrove grindability index
A
TC 28
Petroleum products and related products of synthetic or biological origin
ISO
20844:2015
Petroleum and related products — Determination of the shear stability of polymer-containing
oils using a diesel injector nozzle
TC 31
Tyres, rims and valves
ISO 40001:2015
Passenger car tyres and rims — Part 1: Tyres (metric series)
ISO
23671:2015
Passenger car tyres — Method for measuring relative wet grip performance — Loaded new
tyres
ISO
10231:2003/A
md 1:2015
Motorcycle tyres — Test methods for verifying tyre capabilities — Amendment 1
TC 34
Food products
ISO
10519:2015
Rapeseed — Determination of chlorophyll content — Spectrometric method
ISO 214152:2015
Wheat and wheat flour — Gluten content — Part 2: Determination of wet gluten and gluten
index by mechanical means
C
Microbiology of food and animal feeding stuffs — General requirements and guidance for
microbiological examinations — Amendment 1
G
ISO
7218:2007/Am
d 1:2013
ISO
B
G
C
XZ
A
*
Microbiology of the food chain — Detection of Trichinella larvae in meat by artificial diges-
18743:2015
tion method
C
ISO/TS
18867:2015
Microbiology of the food chain — Polymerase chain reaction (PCR) for the detection of
food-borne pathogens — Detection of pathogenic Yersinia enterocolitica and Yersinia
pseudotuberculosis
E
ISO
17780:2015
Animal and vegetable fats and oils — Determination of aliphatic hydrocarbons in vegetable
oils
TC 38
Textiles
ISO
18782:2015
*
Textiles — Determination of dynamic hygroscopic heat generation
C
ISO
17608:2015
Textiles — Bare elastane yarns — Determination of resistance to chlorinated water (swimming-pool water)
TC 41
Pulleys and belts (including veebelts)
ISO 9563:2015
Belt drives — Electrical conductivity of antistatic endless synchronous belts — Characteristics and test method
ISO
19347:2015
*
A
D
Acoustics
ISO 3621:2015
Measurement of noise emitted by accelerating road vehicles — Engineering method — Part
1: M and N categories
TC 44
Welding and allied processes
ISO
14172:2015
Welding consumables — Covered electrodes for manual metal arc welding of nickel and
nickel alloys — Classification
ISO
17643:2015
Non-destructive testing of welds — Eddy current testing of welds by complex-plane analysis
TC 45
Rubber and rubber products
G
D
C
*
ISO 8308:2015
ISO 2891:2015
ISO
19050:2015
B
Synchronous belt drives — Imperial pitch trapezoidal profile system — Belts and pulleys
TC 43
ISO 5772:2015
E
*
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems —
Specification
D
Rubber and plastics hoses and tubing — Determination of transmission of liquids through
hose and tubing walls
B
Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 1: Determination of Mooney viscosity
C
Rubber, raw, vulcanised — Determination of metal content by ICP-OES
B
Rubber compounding ingredients — Carbon black — Determination of loss on heating
ISO 1126:2015
B
ISO 8312:2015
*
Rubber compounding ingredients — Stearic acid — Definition and test methods
D
Natural rubber latex concentrate — Determination of total phosphate content by spectrophotometric method
A
ISO 202991:2015
Film for wrapping rubber bales — Part 1: Butadiene rubber (BR) and styrene-butadiene
rubber (SBR)
A
ISO 7229:2015
Rubber- or plastics-coated fabrics — Measurement of gas permeability
ISO
19043:2015
*
C
TC 58
Gas cylinders
ISO
14456:2015
*
ISO
16964:2015
*
Gas cylinders — Gas properties and associated classification (FTSC) codes
C
Gas cylinders — Flexible hoses assemblies — Specification and testing
C
ISO
11118:2015
Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods
TC 61
Plastics
ISO
16012:2015
Plastics — Determination of linear dimensions of test specimens
E
B
ISO 672110:2015
*
ISO 182631:2015
*
ISO
10364:2015
*
Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear
viscosity using a parallel-plate oscillatory rheometer
Plastics — Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP
and PE used for flexible and rigid consumer packaging — Part 1: Designation system and
basis for specification
Structural adhesives — Determination of the pot life (working life) of multi-component adhesives
D
A
B
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical
and natural gas industries
ISO
12490:2011
Petroleum and natural gas industries — Mechanical integrity and sizing of actuators and
mounting kits for pipeline valves
G
ISO 199018:2014
Petroleum and natural gas industries — Specific requirements for offshore structures —
Part 8: Marine soil investigations
H
TC 72
Textile machinery and accessories
ISO
18599:2015
*
Textile machinery and accessories — Strips for water jet solidification
A
TC 76
Transfusion, infusion and injection, and blood processing equipment for
medical and pharmaceutical use
ISO 83622:2015
Injection containers and accessories — Part 2: Closures for injection vials
TC 83
Sports and other recreational facilities and equipment
A
Alpine and touring ski-bindings — Test soles for ski-binding tests
ISO 9838:2015
B
TC 85
Nuclear energy, nuclear technologies, and radiological protection
Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 3:
Nuclear fuel cycle
F
ISO/TS 180901:2015
Radiological protection — Characteristics of reference pulsed radiation — Part 1: Photon
radiation
C
TC 87
Cork
ISO 2031:2015
Granulated cork — Determination of apparent bulk density
ISO 127493:2015
*
A
Composition cork — Gasket material — Test methods
ISO 4708:2015
B
TC 92
ISO 167331:2015
Fire safety
*
Fire safety engineering — Selection of design fire scenarios and design fires — Part 1:
Selection of design fire scenarios
TC 94
Personal safety -- Protective clothing and equipment
ISO 123121:2013/Amd
1:2015
Eye and face protection — Sunglasses and related eyewear — Part 1: Sunglasses for general use — Amendment 1
ISO
20471:2013
*
ISO 169007:2015
*
ISO
15654:2015
High visibility clothing — Test methods and requirements
Respiratory protective devices — Methods of test and test equipment — Part 7: Practical
performance test methods
B
Chains and chain sprockets for power transmission and conveyors
*
*
Leaf chains, clevises and sheaves — Dimensions, measuring forces, tensile strengths and
dynamic strengths
D
Fatigue test method for transmission precision roller chains and leaf chains
F
TC 106
Dentistry
ISO
17937:2015
Dentistry — Osteotome
ISO
10650:2015
Dentistry — Powered polymerization activators
ISO
19429:2015
XZ
D
TC 100
ISO 4347:2015
E
B
C
*
Dentistry — Designation system for dental implants
A
TC 107
Metallic and other inorganic coatings
ISO 2746:2015
Vitreous and porcelain enamels — High voltage test
A
TC 108
Mechanical vibration, shock and condition monitoring
ISO 133733:2015
*
ISO 133811:2015
*
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part
3: Guidelines for vibration diagnosis
Condition monitoring and diagnostics of machines — Prognostics — Part 1: General
guidelines
TC 110
Industrial trucks
ISO 2291524:2015
Industrial trucks — Verification of stability — Part 24: Slewing variable-reach rough-terrain
trucks
TC 114
Horology
ISO/TS
18684:2015
Timekeeping instruments — Watch external parts made of hard materials — General requirements and test methods
TC 117
Fans
ISO
13350:2015
Fans — Performance testing of jet fans
TC 121
Anaesthetic and respiratory equipment
ISO 80601-272:2015
Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent
patients
TC 123
Plain bearings
ISO
19259:2015
C
B
E
*
H
Plain bearings — Bearings with embedded solid lubricants
B
TC 130
ISO/TR
19300:2015
F
Graphic technology
*
Graphic technology — Guidelines for the use of standards for print media production
C
TC 131
Fluid power systems
ISO 199732:2015
*
ISO 199733:2015
*
ISO 199735:2015
*
ISO 4393:2015
*
Pneumatic fluid power — Assessment of component reliability by testing — Part 2: Directional control valves
C
Pneumatic fluid power — Assessment of component reliability by testing — Part 3: Cylinders with piston rod
D
Pneumatic fluid power — Assessment of component reliability by testing — Part 5: Nonreturn valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow
control valves, quick-exhaust valves
C
Fluid power systems and components — Cylinders — Basic series of piston strokes
A
ISO 6432:2015
Pneumatic fluid power — Single rod cylinders, 1 000 kPa (10 bar) series, bores from 8 mm
to 25 mm — Basic and mounting dimensions
A
ISO 107671:2015
*
Hydraulic fluid power — Determination of pressure ripple levels generated in systems and
components — Part 1: Method for determining source flow ripple and source impedance of
pumps
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO
15494:2015
Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE),
polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X),
polypropylene (PP) — Metric series for specifications for components and the system
ISO
17885:2015
Plastics piping systems — Mechanical fittings for pressure piping systems — Specifications
ISO
18489:2015
E
H
F
*
Polyethylene (PE) materials for piping systems — Determination of resistance to slow crack
growth under cyclic loading — Cracked Round Bar test method
B
TC 146
Air quality
ISO 162581:2015
Workplace air — Analysis of respirable crystalline silica by X-ray diffraction — Part 1: Directon-filter method
D
ISO 162582:2015
Workplace air — Analysis of respirable crystalline silica by X-ray diffraction — Part 2: Method by indirect analysis
E
ISO
17621:2015
Workplace atmospheres — Short term detector tube measurement systems — Requirements and test methods
D
TC 147
Water quality
ISO
18191:2015
*
Water quality — Determination of pHt in sea water — Method using the indicator dye mcresol purple
ISO
17244:2015
Water quality — Determination of the toxicity of water samples on the embryo-larval development of Japanese oyster (Crassostrea gigas) and mussel (Mytilus edulis or Mytilus galloprovincialis)
TC 149
Cycles
ISO 42101:2014
Cycles — Safety requirements for bicycles — Part 1: Terms and definitions
ISO 42102:2014
Cycles — Safety requirements for bicycles — Part 2: Requirements for city and trekking,
young adult, mountain and racing bicycles
ISO 42103:2014
Cycles — Safety requirements for bicycles — Part 3: Common test methods
ISO 42104:2014
Cycles — Safety requirements for bicycles — Part 4: Braking test methods
ISO 42105:2014
Cycles — Safety requirements for bicycles — Part 5: Steering test methods
ISO 42106:2014
Cycles — Safety requirements for bicycles — Part 6: Frame and fork test methods
ISO 42107:2014
Cycles — Safety requirements for bicycles — Part 7: Wheels and rims test methods
B
D
A
E
B
E
C
D
B
ISO 42108:2014
Cycles — Safety requirements for bicycles — Part 8: Pedal and drive system test methods
ISO 42109:2014
Cycles — Safety requirements for bicycles — Part 9: Saddles and seat-post test methods
TC 150
Implants for surgery
ISO
13356:2015
Implants for surgery — Ceramic materials based on yttria-stabilized tetragonal zirconia (YTZP)
ISO 58401:2015
Cardiovascular implants — Cardiac valve prostheses — Part 1: General requirements
ISO 58402:2015
Cardiovascular implants — Cardiac valve prostheses — Part 2: Surgically implanted heart
valve substitutes
G
ISO 124171:2015
Cardiovascular implants and extracorporeal systems — Vascular device-drug combination
products — Part 1: General requirements
F
TC 156
Corrosion of metals and alloys
ISO
16540:2015
Corrosion of metals and alloys — Methodology for determining the resistance of metals to
stress corrosion cracking using the four-point bend method
TC 159
Ergonomics
ISO 72503:2015
Basic human body measurements for technological design — Part 3: Worldwide and regional design ranges for use in product standards
TC 164
Mechanical testing of metals
B
A
C
G
ISO 68924:2015
*
ISO
18338:2015
*
C
E
Metallic materials — Tensile testing — Part 4: Method of test in liquid helium
C
Metallic materials — Torsion test at ambient temperature
C
ISO 168591:2015
Metallic materials — Leeb hardness test — Part 1: Test method
ISO 168592:2015
Metallic materials — Leeb hardness test — Part 2: Verification and calibration of the testing
devices
ISO 168593:2015
Metallic materials — Leeb hardness test — Part 3: Calibration of reference test blocks
ISO
14556:2015
Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method
TC 172
Optics and photonics
D
B
C
D
ISO
12853:2015
*
ISO
*
Microscopes — Information provided to the user
A
Microscopes — Minimum requirements for binocular tubes
19055:2015
ISO 190561:2015
A
*
TC 173
ISO 108652:2015
Microscopes — Definition and measurement of illumination properties — Part 1: Image
brightness and uniformity in bright field microscopy
A
Assistive products for persons with disability
*
Wheelchair containment and occupant retention systems for accessible transport vehicles
designed for use by both sitting and standing passengers — Part 2: Systems for forwardfacing wheelchair-seated passengers
ISO 168406:2015
Wheelchair seating — Part 6: Simulated use and determination of the changes in properties
of seat cushions
ISO/TR 168409:2015
Wheelchair seating — Part 9: Clinical interface pressure mapping guidelines for seating
TC 176
Quality management and quality assurance
ISO 9000:2015
Quality management systems — Fundamentals and vocabulary
E
E
C
G
Quality management systems — Requirements
ISO 9001:2015
E
TC 183
ISO 9599:2015
ISO
15247:2015
Copper, lead, zinc and nickel ores and concentrates
*
*
Copper, lead, zinc and nickel sulfide concentrates — Determination of hygroscopic moisture
content of the analysis sample — Gravimetric method
A
Zinc sulfide concentrates — Determination of silver content — Acid dissolution and flame
atomic absorption spectrometric method
C
TC 188
Small craft
ISO
19009:2015
Small craft — Electric navigation lights — Performance of LED lights
TC 189
Ceramic tile
ISO 1054514:2015
Ceramic tiles — Part 14: Determination of resistance to stains
TC 199
Safety of machinery
ISO
13850:2015
Safety of machinery — Emergency stop function — Principles for design
TC 204
Intelligent transport systems
C
B
B
ISO 148131:2015
*
ISO/TS 149071:2015
*
ISO 175151:2015
*
Intelligent transport systems — Reference model architecture(s) for the ITS sector — Part 1:
ITS service domains, service groups and services
H
Electronic fee collection — Test procedures for user and fixed equipment — Part 1: Description of test procedures
H
Intelligent transport systems — Communications access for land mobiles (CALM) —
Evolved Universal Terrestrial Radio Access Network (E-UTRAN) — Part 1: General usage
B
ISO/TS
19299:2015
Electronic fee collection — Security framework
TC 206
Fine ceramics
ISO
17859:2015
H
*
Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement method
of piezoelectric strain at high electric field
TC 207
Environmental management
ISO
14001:2015
Environmental management systems — Requirements with guidance for use
TC 211
Geographic information/Geomatics
ISO 191351:2015
Geographic information — Procedures for item registration — Part 1: Fundamentals
TC 213
Dimensional and geometrical product specifications and verification
ISO 2862:2010/Cor
1:2013
E
G
*
Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes
— Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts —
Technical Corrigendum 1
ISO 1661040:2015
Geometrical product specifications (GPS) — Filtration — Part 40: Morphological profile
filters: Basic concepts
TC 215
Health informatics
ISO/TS
13972:2015
*
ISO
14199:2015
*
ISO/TS
17975:2015
*
ISO 215495:2015
*
free
C
Health informatics — Detailed clinical models, characteristics and processes
G
Health informatics — Information models — Biomedical Research Integrated Domain Group
(BRIDG) Model
B
Health informatics — Principles and data requirements for consent in the Collection, Use or
Disclosure of personal health information
E
Health informatics — Patient healthcard data — Part 5: Identification data
B
TC 219
Floor coverings
ISO
12951:2015
Textile floor coverings — Determination of mass loss, fibre bind and stair nosing appearance change using the Lisson Tretrad machine
ISO
16905:2015
B
*
B
Resilient floor coverings — Specification for rubber floor covering — Tile/Plank
B
TC 220
Cryogenic vessels
ISO 210292:2015
Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres
volume — Part 2: Operational requirements
TC 228
Tourism and related services
ISO
Tourism services — Industrial tourism — Service provision
C
13810:2015
C
TC 229
Nanotechnologies
ISO/TS 800042:2015
Nanotechnologies — Vocabulary — Part 2: Nano-objects
TC 234
Fisheries and aquaculture
ISO
16741:2015
Traceability of crustacean products — Specifications on the information to be recorded in
farmed crustacean distribution chains
E
ISO
18539:2015
Traceability of molluscan products — Specifications on the information to be recorded in
captured molluscan distribution chains
D
TC 238
Solid biofuels
B
Solid biofuels — Determination of moisture content — Oven dry method — Part 2: Total
moisture — Simplified method
A
ISO 181343:2015
Solid biofuels — Determination of moisture content — Oven dry method — Part 3: Moisture
in general analysis sample
A
TC 263
Coalbed methane (CBM)
ISO 181342:2015
ISO
18871:2015
*
*
E
TC 292
Security and resilience
ISO
18788:2015
*
ISO/TS
22317:2015
*
ISO/TS
22318:2015
*
ISO/TR
22351:2015
*
Management system for private security operations — Requirements with guidance for use
H
IULTCS
ISO 54022:2015
Method of determining coalbed methane content
Societal security — Business continuity management systems — Guidelines for business
impact analysis (BIA)
E
Societal security — Business continuity management systems — Guidelines for supply
chain continuity
D
Societal security — Emergency management — Message structure for exchange of information
H
International Union of Leather Technologists and Chemists Societies
*
Leather — Determination of flex resistance — Part 2: Vamp flex method
A
ISO
18219:2015
Leather — Determination of chlorinated hydrocarbons in leather — Chromatographic method for short-chain chlorinated paraffins (SCCP)
JTC 1
Information technology
ISO/IEC TR
19759:2015
*
ISO/IEC
19987:2015
*
A
Software Engineering — Guide to the software engineering body of knowledge (SWEBOK)
H
Information technology — EPC Information services — Specification
H
ISO/IEC
19988:2015
*
ISO/IEC
20243:2015
*
ISO/IEC 95946:2014/Cor
1:2015
*
ISO/IEC 95948:2014/Cor
1:2015
*
ISO/IEC
19770-2:2015
*
ISO/IEC TS
30103:2015
*
ISO/IEC
17960:2015
*
ISO/IEC TS
19568:2015
*
ISO/IEC TS
19841:2015
*
ISO/IEC
19775-2:2015
*
ISO/IEC
14543-43:2015
*
ISO/IEC
147632:2012/Amd
1:2015
*
ISO/IEC
14776326:2015
*
ISO/IEC
148882:2008/Cor
1:2015
*
ISO/IEC
19790:2012/Co
r 1:2015
*
ISO/IEC
24759:2014/Co
r 1:2015
*
ISO/IEC
27006:2015
*
Information technology — GS1 Core Business Vocabulary (CBV)
G
Information Technology — Open Trusted Technology ProviderTM Standard (O-TTPS) —
Mitigating maliciously tainted and counterfeit products
E
Information technology — Open Systems Interconnection — The Directory — Part 6: Selected attribute types — Technical Corrigendum 1
free
Information technology — Open Systems Interconnection — The Directory — Part 8: Publickey and attribute certificate frameworks — Technical Corrigendum 1
free
Information technology — Software asset management — Part 2: Software identification tag
G
Software and Systems Engineering — Lifecycle Processes — Framework for Product Quality Achievement
F
Information technology — Programming languages, their environments and system software interfaces — Code signing for source code
B
Programming Languages — C++ Extensions for Library Fundamentals
H
Technical Specification for C++ Extensions for Transactional Memory
E
Information technology — Computer graphics, image processing and environmental data
representation — Extensible 3D (X3D) — Part 2: Scene access interface (SAI)
Information technology — Home Electronic Systems (HES) architecture — Part 4-3: Application layer interface to lower communications layers for network enhanced control devices
of HES Class 1
Information technology — Implementation and operation of customer premises cabling —
Part 2: Planning and installation — Amendment 1
Information technology — Small Computer System Interface (SCSI) — Part 326: Reduced
Block Commands (RBC)
Information technology — Security techniques — Digital signatures with appendix — Part 2:
Integer factorization based mechanisms — Technical Corrigendum 1: To ISO/IEC 148882:2008
Information technology — Security techniques — Security requirements for cryptographic
modules — Technical Corrigendum 1
Information technology — Security techniques — Test requirements for cryptographic modules
— Technical Corrigendum 1
Information technology — Security techniques — Requirements for bodies providing audit
and certification of information security management systems
A
E
XZ
F
free
free
free
E
ISO/IEC
17823:2015
*
ISO/IEC
2300013:2014/Amd
1:2015
*
ISO/IEC
23001-10:2015
*
ISO/IEC
230082:2015/Amd
1:2015
*
ISO/IEC
15438:2015
*
ISO/IEC
24769-61:2015
*
ISO/IEC
24769-62:2015
*
ISO/IEC
24770-61:2015
*
ISO/IEC 90752:2011/Cor
2:2015
*
ISO/IEC 90754:2011/Cor
2:2015
*
ISO/IEC 907514:2011/Cor
2:2015
*
ISO/IEC
15944-2:2015
*
ISO/IEC
15944-9:2015
*
ISO/IEC
19785-3:2015
*
ISO/IEC
197946:2011/Amd
1:2015
*
ISO/IEC TS
20027:2015
*
Information technology — Office equipment — Colour terminology for office colour equipment
C
Information technology - Multimedia application format (MPEG-A) — Part 13: Augmented
reality application format — Amendment 1: ARAF reference software and conformance
XZ
Information technology — MPEG systems technologies — Part 10: Carriage of timed
metadata metrics of media in ISO base media file format
C
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 2: High efficiency video coding — Amendment 1: 3D video extensions
H
Information technology — Automatic identification and data capture techniques — PDF417
bar code symbology specification
H
Information Technology — Real Time Locating System (RTLS) Device Conformance Test
Methods — Part 61: Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface
A
Information Technology — Real Time Locating System (RTLS) Device Conformance Test
Methods — Part 62: High rate pulse repetition frequency Ultra Wide Band (UWB) air interface
A
Information technology — Real Time Locating System (RTLS) device performance test
methods — Part 61: Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface
B
Information technology — Database languages — SQL — Part 2: Foundation
(SQL/Foundation) — Technical Corrigendum 2
free
Information technology — Database languages — SQL — Part 4: Persistent Stored Modules (SQL/PSM) — Technical Corrigendum 2
free
Information technology — Database languages — SQL — Part 14: XML-Related Specifications (SQL/XML) — Technical Corrigendum 2
free
Information technology — Business Operational View — Part 2: Registration of scenarios
and their components as business objects
H
Information technology — Business Operational View — Part 9: Business transaction traceability framework for commitment exchange
H
Information technology — Common Biometric Exchange Formats Framework — Part 3:
Patron format specifications
G
Information technology — Biometric data interchange formats — Part 6: Iris image data —
Amendment 1: Conformance testing methodology and clarification of defects
F
Biometrics interoperability profiles — Best practices for slap tenprint captures
C
Standards confirmed
The following International Standards are confimred for a five year period:
IIW
International Institute of Welding
ISO/TR
22824:2003
TC 4
Rolling bearings
ISO 1224-1:2007
(reconfirmed)
ISO 1224-2:2007
(reconfirmed)
ISO 5753-1:2009
TC 6
Paper, board and pulps
ISO 692:1982
(reconfirmed)
ISO 801-1:1994
(reconfirmed)
ISO 801-2:1994
(reconfirmed)
ISO 801-3:1994
(reconfirmed)
ISO 838:1974
(reconfirmed)
ISO 3688:1999
(reconfirmed)
ISO 5267-1:1999
(reconfirmed)
ISO 5351:2010
ISO 10716:1994
(reconfirmed)
ISO 11093-9:2006
(reconfirmed)
ISO 13542:2006
(reconfirmed)
ISO 14436:2010
ISO 15318:1999
(reconfirmed)
TC 8
Ships and marine technology
ISO/R 538:1967
ISO/R 644:1967
ISO/R 784:1968
ISO 7461:1984
(reconfirmed)
ISO 9203-1:1989
(reconfirmed)
ISO 9203-2:1989
(reconfirmed)
ISO 9203-3:1989
(reconfirmed)
TC 10
Technical product documentation
ISO 128-23:1999
(reconfirmed)
ISO 3766:2003
(reconfirmed)
ISO 7437:1990
(reconfirmed)
ISO 9431:1990
(reconfirmed)
ISO 81714-1:2010
TC 20
Aircraft and space vehicles
ISO 482:1977
(reconfirmed)
ISO 1002:1983
(reconfirmed)
ISO 2020-1:1997
(reconfirmed)
ISO 2020-2:1997
(reconfirmed)
ISO 2671:1982
(reconfirmed)
ISO 2685:1998
(reconfirmed)
ISO 7938:1986
(reconfirmed)
ISO 8078:1984
(reconfirmed)
ISO 8079:1984
(reconfirmed)
ISO 8399-1:1998
(reconfirmed)
ISO 8399-2:1998
(reconfirmed)
ISO 8591-1:1989
(reconfirmed)
ISO 9216:2002
(reconfirmed)
ISO 9217:2002
(reconfirmed)
ISO 9218:2002
(reconfirmed)
ISO 9219:2002
(reconfirmed)
ISO 9662:1994
(reconfirmed)
ISO 9763:1999
(reconfirmed)
ISO 10792-1:1995
(reconfirmed)
ISO 10792-2:1995
(reconfirmed)
ISO 10792-3:1995
(reconfirmed)
ISO 10955:1999
(reconfirmed)
ISO 13411:1997
(reconfirmed)
ISO 13412:1997
(reconfirmed)
ISO 13413:1997
(reconfirmed)
ISO 13415:1997
(reconfirmed)
ISO 13416:1997
(reconfirmed)
ISO 13417:1997
(reconfirmed)
ISO 21849:2006
(reconfirmed)
ISO 1949:1987
ISO 8668-2:1986
(reconfirmed)
ISO 11639:2010
TC 22
Road vehicles
ISO 3412:1992
(reconfirmed)
ISO 3553-1:1987
(reconfirmed)
ISO 4024:1992
(reconfirmed)
ISO 6518-1:2002
(reconfirmed)
ISO 6856:2005
(reconfirmed)
ISO 11565:2006
(reconfirmed)
ISO 19813:2006
(reconfirmed)
ISO 2699:1994
(reconfirmed)
ISO 9103:1987
(reconfirmed)
TC 23
Tractors and machinery for agriculture and forestry
ISO 10975:2009
ISO 11684:1995
(reconfirmed)
ISO 17591:2002
(reconfirmed)
ISO 7918:1995
(reconfirmed)
TC 28
Petroleum products and related products of synthetic or biological origin
ISO 15167:1999
(reconfirmed)
TC 29
Small tools
ISO 839-1:2006
(reconfirmed)
ISO 2236:1991
(reconfirmed)
ISO 2351-1:2007
(reconfirmed)
TC 30
Measurement of fluid flow in closed conduits
ISO 2186:2007
(reconfirmed)
TC 33
Refractories
ISO 8894-1:2010
ISO 21587-1:2007
(reconfirmed)
ISO 21587-2:2007
(reconfirmed)
ISO 21587-3:2007
(reconfirmed)
TC 34
Food products
ISO 13366-2:2006
(reconfirmed)
ISO 17129:2006
(reconfirmed)
ISO 17678:2010
ISO 27205:2010
ISO 29981:2010
ISO 16657:2006
(reconfirmed)
TC 38
Textiles
ISO 1805:2006
(reconfirmed)
ISO 1833-24:2010
ISO/TS
14909:2012
ISO 105-A01:2010
ISO 105-C06:2010
ISO 105-C08:2010
ISO 105-D01:2010
ISO 105-E03:2010
ISO 105-E07:2010
ISO 105-E09:2010
ISO 105-E12:2010
ISO 105-X14:1994
(reconfirmed)
ISO 6989:1981
(reconfirmed)
ISO 23733:2007
(reconfirmed)
TC 39
Machine tools
ISO 447:1984
(reconfirmed)
ISO 2562:1973
(reconfirmed)
ISO 2912:1973
(reconfirmed)
ISO 3590:1976
(reconfirmed)
ISO 3610:1976
(reconfirmed)
ISO 6898:1984
(reconfirmed)
ISO 6899:1984
(reconfirmed)
TC 43
Acoustics
ISO 389-6:2007
(reconfirmed)
ISO 8253-1:2010
ISO 3744:2010
ISO 3746:2010
ISO 11202:2010
TC 44
Welding and allied processes
ISO/TS 150116:2012
TC 45
Rubber and rubber products
ISO 12965:2000
(reconfirmed)
TC 46
Information and documentation
ISO 10957:2009
ISO 9706:1994
(reconfirmed)
ISO 11108:1996
(reconfirmed)
ISO 11798:1999
(reconfirmed)
ISO 22310:2006
(reconfirmed)
TC 51
Pallets for unit load method of materials handling
ISO 18334:2010
TC 54
Essential oils
ISO 856:2006
(reconfirmed)
ISO 1271:1983
(reconfirmed)
ISO 3794:1976
(reconfirmed)
ISO 8897:2010
ISO 11020:1998
(reconfirmed)
TC 60
Gears
ISO 17485:2006
(reconfirmed)
ISO 1122-2:1999
(reconfirmed)
TC 61
Plastics
ISO 13894-1:2000
(reconfirmed)
ISO 19712-2:2007
(reconfirmed)
ISO 19712-3:2007
(reconfirmed)
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 13628-6:2006
ISO 16070:2005
(reconfirmed)
ISO 10441:2007
(reconfirmed)
ISO 13703:2000
(reconfirmed)
ISO 13704:2007
(reconfirmed)
ISO 15544:2000
(reconfirmed)
TC 71
Concrete, reinforced concrete and pre-stressed concrete
ISO 12439:2010
ISO 22966:2009
TC 72
Textile machinery and accessories
ISO 3914-1:1994
(reconfirmed)
ISO 3914-2:1994
(reconfirmed)
ISO 3914-3:1994
(reconfirmed)
ISO 3914-7:1994
(reconfirmed)
ISO 4105:1978
(reconfirmed)
TC 77
Products in fibre reinforced cement
ISO 9125:2009
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO 8690:1988
(reconfirmed)
ISO 17874-1:2010
ISO 17874-5:2007
(reconfirmed)
ISO 9005:2007
(reconfirmed)
TC 92
Fire safety
ISO 1182:2010
ISO 9239-1:2010
TC 96
Cranes
ISO 13202:2003
(reconfirmed)
TC 105
Steel wire ropes
ISO 4345:1988
(reconfirmed)
TC 106
Dentistry
ISO 28158:2010
ISO/TS
13498:2011
TC 108
Mechanical vibration, shock and condition monitoring
ISO 18431-4:2007
(reconfirmed)
TC 110
Industrial trucks
ISO 938:1975
(reconfirmed)
ISO 1756:1975
(reconfirmed)
ISO 2331:1974
(reconfirmed)
ISO 22915-4:2009
TC 111
Round steel link chains, chain slings, components and accessories
ISO 3266:2010
TC 113
Hydrometry
ISO 15769:2010
TC 115
Pumps
ISO 14847:1999
(reconfirmed)
TC 117
Fans
ISO 12499:1999
(reconfirmed)
ISO 13347-3:2004
(reconfirmed)
ISO 13349:2010
TC 121
Anaesthetic and respiratory equipment
ISO 10651-3:1997
(reconfirmed)
TC 127
Earth-moving machinery
ISO 7464:1983
(reconfirmed)
ISO 7546:1983
(reconfirmed)
ISO 9246:1988
(reconfirmed)
ISO 7132:2003
(reconfirmed)
TC 130
Graphic technology
ISO/TS
10128:2009
TC 131
Fluid power systems
ISO 4406:1999
(reconfirmed)
ISO 27407:2010
TC 135
Non-destructive testing
ISO 7963:2006
(reconfirmed)
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO 265-1:1988
(reconfirmed)
ISO 8283-1:1991
(reconfirmed)
ISO 8772:2006
(reconfirmed)
ISO 8773:2006
(reconfirmed)
ISO 13229:2010
ISO 13254:2010
ISO 13255:2010
ISO 13257:2010
ISO 13259:2010
ISO 13260:2010
ISO 13262:2010
ISO 13263:2010
ISO 13264:2010
ISO 13265:2010
ISO 13266:2010
ISO 13267:2010
ISO 13268:2010
ISO 13846:2000
(reconfirmed)
ISO 21004:2006
(reconfirmed)
ISO 10838-3:2001
TC 142
Cleaning equipment for air and other gases
ISO/TS
21220:2009
TC 150
ISO 7206-4:2010
Implants for surgery
ISO 14602:2010
ISO 18192-2:2010
TC 153
Valves
ISO 10434:2004
ISO 15761:2002
TC 156
Corrosion of metals and alloys
ISO 11130:2010
ISO 11844-3:2006
(reconfirmed)
ISO 15329:2006
(reconfirmed)
TC 163
Thermal performance and energy use in the built environment
ISO 12567-1:2010
ISO 12968:2010
ISO 29803:2010
ISO 29804:2009
ISO 29805:2009
TC 165
Timber structures
ISO 22389-1:2010
TC 171
Document management applications
ISO 6196-10:1999
(reconfirmed)
TC 172
Optics and photonics
ISO 10937:2000
(reconfirmed)
ISO 12858-3:2005
(reconfirmed)
ISO 17123-7:2005
(reconfirmed)
TC 183
Copper, lead, zinc and nickel ores and concentrates
ISO 12739:2006
(reconfirmed)
TC 184
Automation systems and integration
ISO/TS 8000311:2012
ISO/TS 159263:2009
ISO/TS 2274530:2009
ISO/TS 290024:2009
ISO/TS 290025:2009
ISO/TS 2900210:2009
ISO/TS 2900231:2009
TC 194
Biological and clinical evaluation of medical devices
ISO 22442-3:2007
(reconfirmed)
TC 201
Surface chemical analysis
ISO 15472:2010
TC 206
Fine ceramics
ISO 22214:2006
(reconfirmed)
ISO 22215:2006
(reconfirmed)
ISO 27448:2009
TC 216
Footwear
ISO 10765:2010
ISO 10768:2010
ISO/TS
16181:2011
ISO 20869:2010
TC 219
Floor coverings
ISO 24336:2005
(reconfirmed)
TC 226
Materials for the production of primary aluminium
ISO 1619:1976
(reconfirmed)
ISO 1620:1976
(reconfirmed)
ISO 2367:1972
(reconfirmed)
ISO 2961:1974
(reconfirmed)
ISO 3566:1976
(reconfirmed)
ISO 3699:1976
(reconfirmed)
ISO 20292:2009
TC 229
Nanotechnologies
ISO/TS
10797:2012
JTC 1
Information technology
ISO/IEC
20060:2010
ISO/IEC 247271:2014
ISO/IEC
13210:1999
(reconfirmed)
ISO/IEC
18009:1999
(reconfirmed)
ISO/IEC TR
24718:2005
(reconfirmed)
ISO 9660:1988
(reconfirmed)
ISO/IEC
10885:1993
(reconfirmed)
ISO/IEC 159465:2009
ISO/IEC TR
19791:2010
ISO/IEC 92811:1990
(reconfirmed)
ISO/IEC 92812:1990
(reconfirmed)
ISO/IEC 109184:1999
(reconfirmed)
ISO/IEC 111721:1993
(reconfirmed)
ISO/IEC 111722:1993
(reconfirmed)
ISO/IEC 111723:1993
(reconfirmed)
ISO/IEC
11544:1993
(reconfirmed)
ISO/IEC 138183:1998
(reconfirmed)
ISO/IEC 1381810:1999
(reconfirmed)
ISO/IEC 144951:1999
(reconfirmed)
ISO/IEC 144952:2003
(reconfirmed)
ISO/IEC 1449613:2004
(reconfirmed)
ISO/IEC 1449626:2010
ISO/IEC 154448:2007
ISO/IEC 159387:2003
(reconfirmed)
ISO/IEC 165001:1999
(reconfirmed)
ISO/IEC 165002:1999
(reconfirmed)
ISO/IEC 165003:1999
(reconfirmed)
ISO/IEC 165004:1999
(reconfirmed)
ISO/IEC 165005:1999
(reconfirmed)
ISO/IEC 165006:1999
(reconfirmed)
ISO/IEC 165007:1999
(reconfirmed)
ISO/IEC 16500-
(reconfirmed)
8:1999
ISO/IEC 165009:1999
(reconfirmed)
ISO/IEC 2100014:2007
ISO/IEC 230004:2009
ISO/IEC 2300011:2009
ISO/IEC 230044:2007
ISO/IEC 248003:2010
ISO/IEC 99951:2009
ISO/IEC 99952:2009
ISO/IEC 99953:2010
ISO/IEC 99954:2009
ISO/IEC 99955:2009
ISO/IEC 99957:2009
ISO/IEC 99958:2009
ISO/IEC TS 291401:2011
ISO/IEC TS 291402:2011
ISO/IEC 197841:2006
Standards withdrawn
Period from 01 September to 30 September 2015
TC 8
Ships and marine technology
ISO/R 538:1967
(replaced by )
ISO/R 644:1967
(replaced by )
ISO/R 784:1968
(replaced by )
TC 58
Gas cylinders
ISO 13340:2001
(replaced by ISO 11118:2015)
TC 106
Dentistry
ISO 10650-1:2004
(replaced by ISO 10650:2015)
ISO 10650-2:2007
(replaced by ISO 10650:2015)
TC 121
Anaesthetic and respiratory equipment
ISO 10651-2:2004
(replaced by ISO 80601-2-72:2015)
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO 14236:2000
(replaced by ISO 17885:2015)
ISO 10838-1:2000
(replaced by ISO 17885:2015)
ISO 10838-2:2000
(replaced by ISO 17885:2015)
ISO 10838-3:2001
(replaced by ISO 17885:2015)
TC 150
Implants for surgery
ISO 5840:2005
(replaced by ISO 5840-2:2015)
ISO/TS
12417:2011
(replaced by ISO 12417-1:2015)
ISO/TS
15539:2000
(replaced by )
TC 164
Mechanical testing of metals
ISO 19819:2004
(replaced by ISO 6892-4:2015)
TC 211
Geographic information/Geomatics
ISO 19135:2005
(replaced by ISO 19135-1:2015)
TC 215
Health informatics
ISO/TS 1107392001:2007
(replaced by ISO 22077-1:2015)
IULTCS
International Union of Leather Technologists and Chemists Societies
ISO 22288:2006
(replaced by ISO 5402-2:2015)
Meeting calendar
(update at 01 September 2015)
Meetings called for the month of August are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
October 2015
4-9
New Delhi
(India)
TC 61
Plastics
4-9
New Delhi
(India)
TC 61/SC 2
Plastics/Mechanical properties
5-8
New Delhi
(India)
TC 61/SC 9
Plastics/Thermoplastic materials
5-8
Paris (France)
TC 172/SC 1
Optics and photonics/Fundamental standards
5-9
Dublin (Ireland)
JTC 1/SC 38
Information technology/Cloud Computing and Distributed Platforms
5-9
Madrid (Spain)
TC 59/SC 3
Buildings and civil engineering works/Functional/user requirements and performance in building
construction
5-9
Madrid (Spain)
TC 59/SC 15
Buildings and civil engineering works/Performance description of houses
5-9
Vienna (Austria)
TC 190
Soil quality
5-9
Vienna (Austria)
TC 190/SC 3
Soil quality/Chemical methods and soil characteristics
5-9
Vienna (Austria)
TC 190/SC 4
Soil quality/Biological methods
5-9
Vienna (Austria)
TC 190/SC 7
Soil quality/Soil and site assessment
5-9
Paris (France)
TC 268
Sustainable development in communities
5-9
Paris (France)
TC 268/SC 1
Sustainable development in communities/Smart community infrastructures
6
Madrid (Spain)
TC 59/SC 18
Buildings and civil engineering works/Construction procurement
6
Hong Kong
(Hong Kong,
China)
TC 176/SC 1
Quality management and quality assurance/Concepts and terminology
6
Vienna (Austria)
TC 190/SC 1
Soil quality/Evaluation of criteria, terminology and codification
6
Lyon (France)
IULTCS
International Union of Leather Technologists and Chemists Societies
6-8
London (United
Kingdom)
TC 25
Cast irons and pig irons
6-8
Paris (France)
TC 172/SC 3
Optics and photonics/Optical materials and components
7
Madrid (Spain)
TC 59/SC 2
Buildings and civil engineering works/Terminology and harmonization of languages
7
Madrid (Spain)
TC 59/SC 16
Buildings and civil engineering works/Accessibility and usability of the built environment
7
New Delhi
(India)
TC 61/SC 1
Plastics/Terminology
7
New Delhi
(India)
TC 61/SC 5
Plastics/Physical-chemical properties
7
New Delhi
(India)
TC 61/SC 10
Plastics/Cellular plastics
7
New Delhi
(India)
TC 61/SC 11
Plastics/Products
7
New Delhi
(India)
TC 61/SC 12
Plastics/Thermosetting materials
8
Virtual (Unknown)
President's
committee
President's committee
8
Bloomington
(USA)
TC 23/SC 13
Tractors and machinery for agriculture and forestry/Powered lawn and garden equipment
8
New Delhi
(India)
TC 61/SC 6
Plastics/Ageing, chemical and environmental resistance
8
New Delhi
(India)
TC 61/SC 13
Plastics/Composites and reinforcement fibres
8
Vienna (Austria)
TC 190/SC 2
Soil quality/Sampling
8-9
Sao Paulo
(Brazil)
TC 58/SC 2
Gas cylinders/Cylinder fittings
8-9
Toronto (Canada)
TC 225
Market, opinion and social research
9
Prague (Czech
Republic)
TC 110/SC 4
Industrial trucks/Rough-terrain trucks
9
Copenhagen
(Denmark)
TC 254
Safety of amusement rides and amusement devices
11-16
Potsdam
(Germany)
TC 204
Intelligent transport systems
12
Beijing (China)
TC 20/SC 4
Aircraft and space vehicles/Aerospace fastener systems
12
Beijing (China)
TC 20/SC 6
Aircraft and space vehicles/Standard atmosphere
12-14
Delft (Netherlands)
TC 59/SC 8
Buildings and civil engineering works/Sealants
12-14
Berlin (Germany)
TC 185
Safety devices for protection against excessive pressure
12-16
Paris (France)
TC 34/SC 17
Food products/Management systems for food safety
12-16
Turin (Italy)
TC 70
Internal combustion engines
12-16
Berlin (Germany)
TC 138
Plastics pipes, fittings and valves for the transport of fluids
12-16
Berlin (Germany)
TC 138/SC 8
Plastics pipes, fittings and valves for the transport of fluids/Rehabilitation of pipeline systems
12-16
Beijing (China)
TC 181
Safety of toys
13
New Orleans
(USA)
TC 2/SC 14
Fasteners/Surface coatings
13
Beijing (China)
TC 20/SC 8
Aircraft and space vehicles/Aerospace terminology
13
Lyon (France)
TC 38/SC 1
Textiles/Tests for coloured textiles and colorants
13
Lyon (France)
TC 38/SC 2
Textiles/Cleansing, finishing and water resistance tests
13-14
Osaka (Japan)
TC 24/SC 4
Particle characterization including sieving/Particle characterization
13-15
Renton (USA)
TC 44/SC 14
Welding and allied processes/Welding and brazing in aerospace
13-15
Porto (Portugal)
TC 216
Footwear
14
New Orleans
(USA)
TC 2/SC 7
Fasteners/Reference standards
14
Paris (France)
TC 28/SC 2
Petroleum products and related products of synthetic or biological origin/Measurement of petroleum and related products
14
Lyon (France)
TC 38/SC 23
Textiles/Fibres and yarns
14
Lyon (France)
TC 38/SC 24
Textiles/Conditioning atmospheres and physical tests for textile fabrics
14
San Diego
(USA)
TC 70/SC 7
Internal combustion engines/Tests for lubricating oil filters
14
Porto (Portugal)
TC 137
Footwear sizing designations and marking systems
14
Berlin (Germany)
TC 244
Industrial furnaces and associated processing equipment
14-15
Beijing (China)
TC 20
Aircraft and space vehicles
15
New Orleans
(USA)
TC 2/SC 12
Fasteners/Fasteners with metric internal thread
15
La Plaine StDenis (France)
TC 17/SC 7
Steel/Methods of testing (other than mechanical tests and chemical analysis)
15
Lyon (France)
TC 38
Textiles
15
Riccione (Italy)
TC 45/SC 4
Rubber and rubber products/Products (other than hoses)
15
Berlin (Germany)
TC 138/SC 6
Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes and fittings
for all applications
15-17
Seattle (USA)
TC 201
Surface chemical analysis
16
New Orleans
(USA)
TC 2
Fasteners
16
San Diego
(USA)
TC 22/SC 34
Road vehicles/Propulsion, powertrain and powertrain fluids
16
Vienna (Austria)
TC 46/SC 8
Information and documentation/Quality - Statistics and performance evaluation
16
Singapore
(Singapore)
TC 59/SC 13
Buildings and civil engineering works/Organization of information about construction works
16
Neuilly-surSeine (France)
TC 67/SC 9
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Liquefied natural gas installations and equipment
18-23
Vichy (France)
TC 45
Rubber and rubber products
18-23
Vichy (France)
TC 45/SC 4
Rubber and rubber products/Products (other than hoses)
18-23
Baltimore
(USA)
TC 184/SC 4
Automation systems and integration/Industrial data
19
Santiago
(Chile)
TC 195/SC 1
Building construction machinery and equipment/Machinery and equipment for concrete work
19-20
Santa Ana
(USA)
TC 34/SC 15
Food products/Coffee
19-21
Kyoto (Japan)
TC 266
Biomimetics
19-21
Jeju (Korea,
Republic of)
TC 281
Fine Bubble Technology
19-22
Vichy (France)
TC 45/SC 1
Rubber and rubber products/Rubber and plastics hoses and hose assemblies
*
19-23
Matsue (Japan)
JTC 1/SC 2
Information technology/Coded character sets
19-24
Frankfurt
(Germany)
TC 131
Fluid power systems
20
Metz (France)
TC 173/SC 2
Assistive products for persons with disability/Classification and terminology
20-21
La Plaine StDenis (France)
TC 23/SC 3
Tractors and machinery for agriculture and forestry/Safety and comfort
20-21
Sao Paulo
(Brazil)
TC 135/SC 9
Non-destructive testing/Acoustic emission testing
20-23
Beijing (China)
TC 269
Railway applications
21
Stockholm
(Sweden)
TC 17/SC 1
Steel/Methods of determination of chemical composition
21
Gaithersburg
(USA)
TC 92/SC 1
Fire safety/Fire initiation and growth
21
Dublin (Ireland)
TC 279
Innovation management
21-23
Oslo (Norway)
TC 58/SC 3
Gas cylinders/Cylinder design
21-23
Katowize (Poland)
TC 263
Coalbed methane (CBM)
22
Vichy (France)
TC 45/SC 2
Rubber and rubber products/Testing and analysis
22
Vienna (Austria)
TC 83/SC 4
Sports and other recreational facilities and equipment/Snowsports equipment
22
Gaithersburg
(USA)
TC 92/SC 3
Fire safety/Fire threat to people and environment
22
Santiago
(Chile)
TC 195
Building construction machinery and equipment
22
Frankfurt
(Germany)
TC 291
Domestic gas cooking appliances
22-23
Göteborg
(Sweden)
TC 22/SC 33
Road vehicles/Vehicle dynamics and chassis components
22-23
London (United
Kingdom)
TC 79/SC 2
Light metals and their alloys/Organic and anodic oxidation coatings on aluminium
22-23
Berlin (Germany)
TC 209
Cleanrooms and associated controlled environments
23
Vichy (France)
TC 45/SC 3
Rubber and rubber products/Raw materials (including latex) for use in the rubber industry
23
Gaithersburg
(USA)
TC 92
Fire safety
23
Gaithersburg
(USA)
TC 92/SC 2
Fire safety/Fire containment
23
Gaithersburg
(USA)
TC 92/SC 4
Fire safety/Fire safety engineering
23
Virtual (Unknown)
TC 154
Processes, data elements and documents in commerce, industry and administration
23-27
Phoenix (USA)
TC 134
Fertilizers and soil conditioners
25-27
Los Angeles
(USA)
TC 159/SC 5
Ergonomics/Ergonomics of the physical environment
26
Arlington (USA)
TC 79/SC 6
Light metals and their alloys/Wrought aluminium and aluminium alloys
26-28
Toronto (Canada)
PC 280
Management Consultancy
26-29
Pretoria (South
Africa)
TC 264
Fireworks
26-30
St. Petersburg
(Russian Federation)
TC 8
Ships and marine technology
26-30
Porto Alegre
(Brazil)
TC 23/SC 17
Tractors and machinery for agriculture and forestry/Manually portable forest machinery
26-30
Milan (Italy)
TC 131/SC 4
Fluid power systems/Connectors and similar products and components
26-30
Milan (Italy)
TC 131/SC 6
Fluid power systems/Contamination control
26-31
Beijing (China)
JTC 1
Information technology
27
St. Petersburg
(Russian Federation)
TC 8/SC 6
Ships and marine technology/Navigation and ship operations
27
St. Petersburg
(Russian Federation)
TC 8/SC 7
Ships and marine technology/Inland navigation vessels
27
St. Petersburg
(Russian Federation)
TC 8/SC 11
Ships and marine technology/Intermodal and Short Sea Shipping
27
Arlington (USA)
TC 79/SC 9
Light metals and their alloys/Symbolization
27
Tuttlingen
(Germany)
TC 170
Surgical instruments
27-28
Greenville
(USA)
TC 31/SC 9
Tyres, rims and valves/Valves for tube and tubeless tyres
28
Arlington (USA)
TC 79/SC 5
Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium
28-29
La Plaine StDenis (France)
TC 135/SC 4
Non-destructive testing/Eddy current methods
28-29
Mainz (Germany)
TC 199
Safety of machinery
28-30
Tsukuba (Japan)
TC 202
Microbeam analysis
29
Seoul (Korea,
Republic of)
TC 71
Concrete, reinforced concrete and pre-stressed concrete
29
Washington,
D.C (USA)
TC 79
Light metals and their alloys
29
Silver Spring
(USA)
TC 234
Fisheries and aquaculture
29
Berlin (Germany)
TC 256
Pigments, dyestuffs and extenders
29-30
Tampa, Florida
(USA)
TC 17/SC 12
Steel/Continuous mill flat rolled products
November 2015
1-4
Ghent (Belgium)
TC 94/SC 14
Personal safety -- Protective clothing and equipment/Fire-fighters' personal equipment
2
Atlanta (USA)
TC 41/SC 3
Pulleys and belts (including veebelts)/Conveyor belts
2-4
Beijing (China)
2-6
*
*
PC 295
Audit data collection
New Jersey
(USA)
JTC 1/SC 7
Information technology/Software and systems engineering
2-6
Bern (Switzerland)
TC 215
Health informatics
2-6
Beijing (China)
TC 282
Water re-use
2-6
Beijing (China)
TC 282/SC 1
Water re-use/Treated wastewater re-use for Irrigation
2-6
Beijing (China)
TC 282/SC 2
Water re-use/Water re-use in urban areas
2-8
Seoul (Korea,
Republic of)
TC 130
Graphic technology
3
Atlanta (USA)
TC 41/SC 1
Pulleys and belts (including veebelts)/Friction
3
Berlin (Germany)
TC 83
Sports and other recreational facilities and equipment
3-5
Montreal (Canada)
TC 20/SC 9
Aircraft and space vehicles/Air cargo and ground equipment
3-5
Berlin (Germany)
TC 22/SC 39
Road vehicles/Ergonomics
3-6
Accra (Ghana)
TC 285
Clean cookstoves and clean cooking solutions
4
Atlanta (USA)
TC 41/SC 4
Pulleys and belts (including veebelts)/Synchronous belt drives
4
Sydney (Australia)
TC 110/SC 1
Industrial trucks/General terminology
4
Beijing (China)
TC 282/SC 3
Water re-use/Risk and performance evaluation of water re-use systems
5
Atlanta (USA)
TC 41
Pulleys and belts (including veebelts)
5
Sydney (Australia)
TC 110/SC 2
Industrial trucks/Safety of powered industrial trucks
5
Yellow Springs
(USA)
TC 159/SC 3
Ergonomics/Anthropometry and biomechanics
6
Sydney (Australia)
TC 110
Industrial trucks
6
Sydney (Australia)
TC 110/SC 5
Industrial trucks/Sustainability
9-12
Sevilla (Spain)
TC 189
Ceramic tile
9-12
Rio de Janeiro
(Brazil)
TC 262
Risk management
9-13
London (United
Kingdom)
PC 287
Chain of custody of wood and wood-based products
9-13
Kobe (Japan)
TC 21
Equipment for fire protection and fire fighting
9-13
Tokyo (Japan)
TC 94/SC 15
Personal safety -- Protective clothing and equipment/Respiratory protective devices
9-13
Sydney (Australia)
TC 275
Sludge recovery, recycling, treatment and disposal
10-13
Balzers (Liechtenstein)
TC 112
Vacuum technology
10-13
Yokohama
TC 251
Asset management
(Japan)
11
Vicenza (Italy)
TC 44/SC 13
Welding and allied processes/Brazing materials and processes
11
Nottingham
(United Kingdom)
TC 60
Gears
11-13
Munich (Germany)
TC 44/SC 12
Welding and allied processes/Soldering materials
11-13
Geel (Belgium)
TC 212
Clinical laboratory testing and in vitro diagnostic test systems
12-13
Kuala Lumpur
(Malaysia)
TC 227
Springs
12-13
Galveston
(USA)
TC 260
Human resource management
13
Apeldoorn
(Netherlands)
TC 22/SC 41
Road vehicles/Specific aspects for gaseous fuels
13
Kuala Lumpur
(Malaysia)
TC 123
Plain bearings
16
Cleveland
(USA)
PC 252
Natural gas fuelling stations for vehicles
16-17
Brasilia (Brazil)
TC 241
Road traffic safety management systems
16-18
Bergamo (Italy)
TC 147/SC 3
Water quality/Radioactivity measurements
16-19
Amsterdam
(Netherlands)
TC 188
Small craft
16-20
Reston (USA)
TC 98
Bases for design of structures
16-20
Kyoto (Japan)
TC 160
Glass in building
16-20
Seattle (USA)
TC 210
Quality management and corresponding general aspects for medical devices
17-19
Agen (France)
TC 20/SC 10
Aircraft and space vehicles/Aerospace fluid systems and components
18
Stockholm
(Sweden)
TC 10/SC 8
Technical product documentation/Construction documentation
19
Reston (USA)
TC 98/SC 2
Bases for design of structures/Reliability of structures
19
Reston (USA)
TC 98/SC 3
Bases for design of structures/Loads, forces and other actions
20-28
Hong Kong
(Hong Kong,
China)
TC 176
Quality management and quality assurance
23-27
Hong Kong
(Hong Kong,
China)
TC 176/SC 2
Quality management and quality assurance/Quality systems
23-27
Hong Kong
(Hong Kong,
China)
TC 176/SC 3
Quality management and quality assurance/Supporting technologies
23-27
Ardooie (Belgium)
TC 188/SC 1
Small craft/Personal safety equipment
24-26
Sydney (Australia)
PC 294
Guidance on unit pricing
26
Madrid (Spain)
TC 94/SC 3
Personal safety -- Protective clothing and equipment/Foot protection
TC 120
Leather
Istanbul (Tur-
*
key)
*
November-December 2015
30-3
(Unknown)
30-4
Bali (Indonesia)
*
*
TC 69/SC 8
Applications of statistical methods/Application of statistical and related methodology for new technology and product development
TC 292
Security and resilience
December 2015
1-3
Wokingham
(United Kingdom)
TC 121/SC 2
Anaesthetic and respiratory equipment/Airways and related equipment
2-3
London (United
Kingdom)
TC 20/SC 16
Aircraft and space vehicles/Unmanned aircraft systems
3-4
Auburn Hills
(USA)
TC 22/SC 31
Road vehicles/Data communication
3-4
Torrance
(USA)
TC 197
Hydrogen technologies
7-11
Dubaï (United
Arab Emirates)
TC 217
Cosmetics
8
Istanbul (Turkey)
TC 180
Solar energy
8-9
Düsseldorf
(Germany)
TC 17/SC 4
Steel/Heat treatable and alloy steels
10
Berlin (Germany)
TC 44/SC 6
Welding and allied processes/Resistance welding and allied mechanical joining
10
Clearwater
(USA)
TC 83/SC 5
Sports and other recreational facilities and equipment/Ice hockey equipment and facilities
10-11
Sydney (Australia)
TC 211
Geographic information/Geomatics
14-17
Lyon (France)
TC 272
Forensic sciences
15-16
Berlin (Germany)
TC 44/SC 10
Welding and allied processes/Quality management in the field of welding
18
Berlin (Germany)
TC 198
Sterilization of health care products
*
*
October 2015
12-16
Berlin (Germany)
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil,
waste and drainage (including land drainage)
12-16
Berlin (Germany)
TC 138/SC 2
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water
supplies
12-16
Berlin (Germany)
TC 138/SC 3
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial
applications
12-16
Berlin (Germany)
TC 138/SC 4
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply of gaseous fuels
12-16
Berlin (Germany)
TC 138/SC 5
Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes, fittings
and valves of plastic materials and their accessories -- Test methods and basic specifications
12-16
Berlin (Germany)
TC 138/SC 7
Plastics pipes, fittings and valves for the transport of fluids/Valves and auxiliary equipment of
plastics materials
JTC 1/SC 37
Information technology/Biometrics
January 2016
10-14
Martigny (Swit-
zerland)
11-15
Casablanca
(Morocco)
*
TC 69/SC 4
Applications of statistical methods/Applications of statistical methods in product and process
management
11-15
Vienna (Austria)
*
TC 268
Sustainable development in communities
11-15
Vienna (Austria)
*
*
TC 268/SC 1
Sustainable development in communities/Smart community infrastructures
22
Berlin (Germany)
*
TC 76
Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
25-27
London (United
Kingdom)
TC 8/SC 8
Ships and marine technology/Ship design
25-27
(Germany)
*
*
TC 69/SC 7
Applications of statistical methods/Applications of statistical and related techniques for the implementation of Six Sigma
25-29
London (United
Kingdom)
*
TC 107
Metallic and other inorganic coatings
25-29
London (United
Kingdom)
*
*
TC 107/SC 3
Metallic and other inorganic coatings/Electrodeposited coatings and related finishes
25-29
London (United
Kingdom)
*
*
TC 107/SC 8
Metallic and other inorganic coatings/Chemical conversion coatings
28
London (United
Kingdom)
TC 107/SC 7
Metallic and other inorganic coatings/Corrosion tests
28
West Conshohocken
(Philadelphia)
(USA)
*
*
TC 261
Additive manufacturing
February 2016
8-12
Paris (France)
*
TC 58/SC 4
Gas cylinders/Operational requirements for gas cylinders
15-19
Rome (Italy)
*
JTC 1/SC 35
Information technology/User interfaces
16-28
Savannah
(USA)
TC 23/SC 15
Tractors and machinery for agriculture and forestry/Machinery for forestry
25-26
Geneva (Switzerland)
TMB
Technical Management Board
29
Birmingham
(United Kingdom)
TC 257
Evaluation of energy savings
*
Paris (France)
*
*
TC 34/SC 18
Food products/Cocoa
(USA)
*
*
TC 213
Dimensional and geometrical product specifications and verification
March 2016
3-4
(Unknown)
*
*
TC 182/SC 1
Geotechnics/Geotechnical investigation and testing
14-18
Kanazawa
(Japan)
*
TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
14-18
Sydney (Australia)
TC 108/SC 2
Mechanical vibration, shock and condition monitoring/Measurement and evaluation of mechanical
vibration and shock as applied to machines, vehicles and structures
14-18
Sydney (Australia)
TC 108/SC 5
Mechanical vibration, shock and condition monitoring/Condition monitoring and diagnostics of
machine systems
17
Milan (Italy)
17-18
Geneva (Switzerland)
TC 221
Geosynthetics
*
COUNCIL
Council
*
*
TC 67/SC 7
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Offshore structures
*
TC 219
Floor coverings
TC 117
Fans
TC 178
Lifts, escalators and moving walks
TC 108
Mechanical vibration, shock and condition monitoring
1st Quarter 2016
Singapore
(Singapore)
April 2016
6
Delft (Netherlands)
11-12
Beijing (China)
11-15
Sydney (Australia)
11-16
Copenhagen
(Denmark)
11-16
Copenhagen
(Denmark)
*
TC 108/SC 3
Mechanical vibration, shock and condition monitoring/Use and calibration of vibration and shock
measuring instruments
11-16
Copenhagen
(Denmark)
*
TC 108/SC 6
Mechanical vibration, shock and condition monitoring/Vibration and shock generating systems
12-13
(Europe)
*
*
TC 67/SC 2
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Pipeline transportation systems
18-19
Tampa, Florida
(USA)
*
*
JTC 1/SC 27
Information technology/IT Security techniques
22-23
ClausthalZellerfeld
(Germany)
*
TC 24/SC 4
Particle characterization including sieving/Particle characterization
25
Frankfurt
(Germany)
*
*
TC 68/SC 4
Financial services/Securities and related financial instruments
25-29
Berlin (Germany)
*
*
TC 161
Control and protective devices for gas and/or oil burners and appliances
26
Frankfurt
(Germany)
*
TC 68/SC 7
Financial services/Core banking
28
Frankfurt
(Germany)
*
TC 68
Financial services
Toronto (Canada)
*
*
JTC 1/SC 38
Information technology/Cloud Computing and Distributed Platforms
Paris (France)
*
*
TC 31/SC 8
Tyres, rims and valves/Aircraft tyres and rims
*
*
May 2016
2-6
Amsterdam
(Netherlands)
*
TC 215
Health informatics
6-13
Berlin (Germany)
*
*
TC 10
Technical product documentation
9-13
Paris (France)
*
TC 34/SC 9
Food products/Microbiology
9-13
(Germany)
*
*
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
9-13
Wellington
(New Zealand)
*
*
TC 46
Information and documentation
9-13
Wellington
(New Zealand)
*
TC 46/SC 11
Information and documentation/Archives/records management
9-13
(USA)
*
*
TC 276
Biotechnology
11
(Portugal)
*
*
TC 87
Cork
12-13
Tokyo (Japan)
*
*
TC 17/SC 16
Steel/Steels for the reinforcement and prestressing of concrete
16-20
Suzhou (China)
*
JTC 1/SC 40
Information technology/IT Service Management and IT Governance
16-20
Chicago (USA)
*
*
TC 121
Anaesthetic and respiratory equipment
19-20
Tokyo (Japan)
*
TC 184/SC 5
Automation systems and integration/Interoperability, integration, and architectures for enterprise
systems and automation applications
22-27
Sapporo (Japan)
*
TC 184/SC 4
Automation systems and integration/Industrial data
23-25
Rome (Italy)
*
TC 145
Graphical symbols
23-28
Ljubljana (Slovenia)
*
TC 37/SC 4
Terminology and other language and content resources/Language resource management
23-28
Stockholm
(Sweden)
*
TC 130
Graphic technology
25
Brussels (Belgium)
*
*
TC 115
Pumps
26-27
(Malaysia)
*
*
TC 228
Tourism and related services
(Japan)
*
*
TC 22/SC 39
Road vehicles/Ergonomics
(Italy)
*
*
TC 67/SC 4
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and production equipment
(India)
*
*
TC 85
Nuclear energy, nuclear technologies, and radiological protection
Atlanta (USA)
*
*
TC 86
Refrigeration and air-conditioning
(Korea, Republic of)
*
*
TC 122
Packaging
(USA)
*
*
TC 282/SC 3
Water re-use/Risk and performance evaluation of water re-use systems
Mexico City
(Mexico)
*
*
TC 289
Brand evaluation
June 2016
4
Geneva (Switzerland)
*
JTC 1/SC 29
Information technology/Coding of audio, picture, multimedia and hypermedia information
6-7
Geneva (Switzerland)
*
TC 172/SC 6
Optics and photonics/Geodetic and surveying instruments
6-8
Paris (France)
*
TC 220
Cryogenic vessels
7-10
Prague (Czech
Republic)
*
TC 156
Corrosion of metals and alloys
14-17
Ekaterinburg
(Russian Fed-
*
*
REMCO
Committee on reference materials
eration)
15-16
Geneva (Switzerland)
18-20
Munich (Germany)
20-21
Berlin (Germany)
22-23
24
*
TMB
Technical Management Board
TC 135
Non-destructive testing
*
TC 22/SC 32
Road vehicles/Electrical and electronic components and general system aspects
Porto (Portugal)
*
TC 17/SC 17
Steel/Steel wire rod and wire products
Porto (Portugal)
*
TC 17/SC 15
Steel/Railway rails, rails fasteners, wheels and wheelsets
(Germany)
*
*
JTC 1/SC 36
Information technology/Information technology for learning, education and training
(Europe)
*
*
TC 22/SC 38
Road vehicles/Motorcycles and mopeds
(Germany)
*
*
TC 29/SC 10
Small tools/Assembly tools for screws and nuts, pliers and nippers
(Canada)
*
*
TC 159/SC 1
Ergonomics/General ergonomics principles
St. Petersburg
(Russian Federation)
*
*
TC 172/SC 4
Optics and photonics/Telescopic systems
Stockholm
(Sweden)
*
*
TC 242
Energy Management
Turin (Italy)
*
*
TC 274
Light and lighting
June-July 2016
25-1
(Denmark)
*
*
TC 37
Terminology and other language and content resources
27-1
London (United
Kingdom)
*
TC 188
Small craft
27-1
(Unknown)
*
*
TC 224
Service activities relating to drinking water supply systems and wastewater systems - Quality
criteria of the service and performance indicators
27-1
Hangzhou
(China)
*
*
TC 268
Sustainable development in communities
27-1
Hangzhou
(China)
*
*
TC 268/SC 1
Sustainable development in communities/Smart community infrastructures
*
*
TC 34/SC 4
Food products/Cereals and pulses
New Delhi
(India)
*
*
TC 34/SC 7
Food products/Spices, culinary herbs and condiments
(China)
*
*
TC 34/SC 16
Food products/Horizontal methods for molecular biomarker analysis
Chennai (India)
*
*
TC 120
Leather
2nd Quarter 2016
(Germany)
1st Semester 2016
August 2016
19
Berlin (Germany)
*
*
TC 206
Fine ceramics
22-26
Beijing (China)
*
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data representation
(USA)
*
*
TC 91
Surface active agents
September 2016
5-9
Bilbao (Spain)
*
TC 108/SC 4
Mechanical vibration, shock and condition monitoring/Human exposure to mechanical vibration
and shock
5-10
Sydney (Australia)
*
TC 147
Water quality
11-17
San José,
California
(USA)
*
TC 130
Graphic technology
19
Beijing (China)
*
COUNCIL
Council
20
Beijing (China)
*
TMB
Technical Management Board
21-23
Beijing (China)
*
GA
General Assembly
26-30
Berlin (Germany)
*
*
TC 163
Thermal performance and energy use in the built environment
26-30
Berlin (Germany)
*
*
TC 205
Building environment design
26-30
(Canada)
*
*
TC 218
Timber
29-30
(France)
*
*
TC 17
Steel
Vienna (Austria)
*
*
JTC 1/SC 22
Information technology/Programming languages, their environments and system software interfaces
Berlin (Germany)
*
*
TC 61
Plastics
Sao Paulo
(Brazil)
*
*
TC 173
Assistive products for persons with disability
Sao Paulo
(Brazil)
*
*
TC 209
Cleanrooms and associated controlled environments
Shanghai (China)
*
*
TC 213
Dimensional and geometrical product specifications and verification
Beijing (China)
*
*
TC 256
Pigments, dyestuffs and extenders
October 2016
6-7
Berlin (Germany)
*
*
TC 119
Powder metallurgy
16-21
(Malaysia)
*
*
TC 45
Rubber and rubber products
17-21
Berlin (Germany)
*
*
JTC 1/SC 38
Information technology/Cloud Computing and Distributed Platforms
17-21
(China)
*
*
TC 5/SC 2
Ferrous metal pipes and metallic fittings/Cast iron pipes, fittings and their joints
17-21
Kyoto (Japan)
*
TC 138
Plastics pipes, fittings and valves for the transport of fluids
20-21
London (United
*
TC 58
Gas cylinders
Kingdom)
24-28
Sydney (Australia)
*
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
(Brazil)
*
*
TC 59
Buildings and civil engineering works
Burlington,
Vermont (USA)
*
*
TC 146
Air quality
Tokyo (Japan)
*
*
TC 153
Valves
(Korea, Republic of)
*
*
TC 201
Surface chemical analysis
Tel Aviv (Israel)
*
*
TC 282
Water re-use
Tel Aviv (Israel)
*
*
TC 282/SC 3
Water re-use/Risk and performance evaluation of water re-use systems
November 2016
1-4
Troy (USA)
*
*
TC 22/SC 36
Road vehicles/Safety aspects and impact testing
7-8
Seoul (Korea,
Republic of)
*
TC 159/SC 4
Ergonomics/Ergonomics of human-system interaction
7-12
Lillehammer
(Norway)
*
*
JTC 1
Information technology
8-10
Kobe (Japan)
*
TC 212
Clinical laboratory testing and in vitro diagnostic test systems
Christchurch
(New Zealand)
*
*
TC 20/SC 1
Aircraft and space vehicles/Aerospace electrical requirements
(Malaysia)
*
*
TC 215
Health informatics
Delft (Netherlands)
*
*
TC 28
Petroleum products and related products of synthetic or biological origin
Delft (Netherlands)
*
*
TC 28/SC 5
Petroleum products and related products of synthetic or biological origin/Measurement of refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels
Delft (Netherlands)
*
*
TC 28/SC 7
Petroleum products and related products of synthetic or biological origin/Liquid Biofuels
(India)
*
*
TC 113
Hydrometry
(Korea, Republic of)
*
*
JTC 1/SC 23
Information technology/Digitally Recorded Media for Information Interchange and Storage
(South Africa)
*
*
TC 44
Welding and allied processes
(Sweden)
*
*
TC 102
Iron ore and direct reduced iron
(Japan)
*
*
TC 138/SC 2
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water
supplies
(Japan)
*
*
TC 183
Copper, lead, zinc and nickel ores and concentrates
4th Quarter 2016
Month unknown 2016
April 2017
10
Guilin (China)
*
*
TC 29/SC 8
Small tools/Tools for pressing and moulding
(China)
*
*
TC 215
Health informatics
Washington,
D.C (USA)
*
*
TC 4
Rolling bearings
(Sweden)
*
*
TC 29
Small tools
(Unknown)
*
*
TC 226
Materials for the production of primary aluminium
(Australia)
*
*
JTC 1/SC 36
Information technology/Information technology for learning, education and training
(USA)
*
*
TC 42
Photography
*
*
TC 31
Tyres, rims and valves
London (United
Kingdom)
*
*
JTC 1/SC 22
Information technology/Programming languages, their environments and system software interfaces
(Japan)
*
*
TC 20/SC 1
Aircraft and space vehicles/Aerospace electrical requirements
New Delhi
(India)
*
*
TC 178
Lifts, escalators and moving walks
*
*
TC 289
Brand evaluation
Hawaii (USA)
*
TC 45
Rubber and rubber products
(Korea, Republic of)
*
*
TC 215
Health informatics
*
*
TC 54
Essential oils
(North America)
*
*
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data representation
Erlangen
(Germany)
*
*
TC 36
Cinematography
(South Africa)
*
*
TC 46
Information and documentation
(South Africa)
*
*
TC 46/SC 11
Information and documentation/Archives/records management
May 2017
June 2017
2nd Quarter 2017
(North America)
September 2017
3rd Quarter 2017
Vienna (Austria)
October 2017
22-27
November 2017
(India)
Month unknown 2017
(United Kingdom)
*
*
TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
Seoul (Korea,
Republic of)
*
*
TC 161
Control and protective devices for gas and/or oil burners and appliances
(USA)
*
*
TC 198
Sterilization of health care products
Milan (Italy)
*
*
TC 206
Fine ceramics
*
*
JTC 1/SC 36
Information technology/Information technology for learning, education and training
*
*
TC 61
Plastics
*
*
TC 215
Health informatics
(Europe)
*
*
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data representation
(China)
*
*
TC 45
Rubber and rubber products
(USA)
*
*
TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
Milan (Italy)
*
*
TC 161
Control and protective devices for gas and/or oil burners and appliances
*
*
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data representation
*
*
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data representation
June 2018
(Korea, Republic of)
September 2018
(Japan)
October 2018
Kuala Lumpur
(Malaysia)
Month unknown 2018
Month unknown 2019
(Asia)
Month unknown 2020
(North America)