ISO Update
Supplement to ISOfocus
November 2015
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International
Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been
reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The
DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 October to 31 October 2015
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 24
Particle characterization including sieving
ISO/CD 13320
Particle size analysis — Laser diffraction methods
TC 29
Small tools
ISO/DTS 13399-80
Cutting tool data representation and exchange — Part 80: Creation and exchange of 3D models — Overview and principles
ISO/DTS 13399310
Cutting tool data representation and exchange — Part 310: Creation and exchange of 3D models — Turning tools with
carbide tips
ISO/CD 1703
Assembly tools for screws and nuts — Designation and nomenclature
TC 30
Measurement of fluid flow in closed conduits
ISO/CD 12764
Measurement of fluid flow in closed conduits — Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
TC 35
Paints and varnishes
ISO/CD 11124-2
Preparation of steel substrates before application of paints and related products — Specifications for metallic blastcleaning abrasives — Part 2: Chilled-iron grit
ISO/CD 11125-1
Preparation of steel substrates before application of paints and related products — Test methods for metallic blastcleaning abrasives — Part 1: Sampling
ISO/CD 11125-2
Preparation of steel substrates before application of paints and related products — Test methods for metallic blastcleaning abrasives — Part 2: Determination of particle size distribution
ISO/CD 11125-3
Preparation of steel substrates before application of paints and related products — Test methods for metallic blastcleaning abrasives — Part 3: Determination of hardness
ISO/CD 11125-4
Preparation of steel substrates before application of paints and related products — Test methods for metallic blastcleaning abrasives — Part 4: Determination of apparent density
ISO/CD 11125-5
Preparation of steel substrates before application of paints and related products — Test methods for metallic blastcleaning abrasives — Part 5: Determination of percentage defective particles and of microstructure
ISO/CD 11125-6
Preparation of steel substrates before application of paints and related products — Test methods for metallic blastcleaning abrasives — Part 6: Determination of foreign matter
ISO/CD 11125-7
Preparation of steel substrates before application of paints and related products — Test methods for metallic blastcleaning abrasives — Part 7: Determination of moisture
TC 43
Acoustics
ISO/CD 389-1
Acoustics — Reference zero for the calibration of audiometric equipment — Part 1: Reference equivalent threshold
sound pressure levels for pure tones and supra-aural earphones
TC 44
Welding and allied processes
ISO/CD 3821
Gas welding equipment — Rubber hoses for welding, cutting and allied processes
ISO/CD 14114
Gas welding equipment — Acetylene manifold systems for welding, cutting and allied processes — General requirements
ISO/CD 15012-3
Health and safety in welding and allied processes — Requirements, testing and marking of equipment for air filtration —
Part 3: Determination of the capture efficiency of on-gun welding fume extraction devices
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO/CD 35101
Petroleum and natural gas industries — Arctic operations — Working environment
TC 68
Financial services
ISO/CD 20275
Financial services — Entity Legal Forms
TC 83
Sports and other recreational facilities and equipment
ISO/CD 20380
Public swimming pools — Computer vision systems for the detection of drowning accidents in swimming pools — Safety requirements and test methods
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO/CD 14146
Radiation protection — Criteria and performance limits for the periodic evaluation of processors of personal dosemeters
for X and gamma radiation
TC 107
Metallic and other inorganic coatings
ISO/CD 2360
Non-conductive coatings on non-magnetic electrically conductive basis materials — Measurement of coating thickness
— Amplitude-sensitive eddy-current method
TC 127
Earth-moving machinery
ISO/CD 17757
Earth-moving machinery — Autonomous machine system safety
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO/CD TS 206561
Plastics piping systems — General rules for structural design of glass-reinforced thermosetting plastics (GRP) pipes —
Part 1: Buried pipe
TC 150
Implants for surgery
ISO/CD 5910
Cardiovascular implants and extracoporeal systems — Cardiac valve repair devices
TC 165
Timber structures
ISO/CD 8375
Timber structures — Glued laminated timber — Test methods for determination of physical and mechanical properties
TC 172
Optics and photonics
ISO/CD 10110-12
Optics and photonics — Preparation of drawings for optical elements and systems — Part 12: Aspheric surfaces
ISO/CD 10110-14
Optics and photonics — Preparation of drawings for optical elements and systems — Part 14: Wavefront deformation
tolerance
ISO/CD TR 149992
Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 2: Measurement
and evaluation techniques
TC 190
Soil quality
ISO/CD 25177
Soil quality — Field soil description
ISO/CD 23470
Soil quality — Determination of effective cation exchange capacity (CEC) and exchangeable cations using a hexamminecobalt trichloride solution
TC 193
Natural gas
ISO/CD 20729
Natural gas — Determination of sulfur compounds — Determination of total sulfur content by Ultraviolet Fluorescence
method
TC 201
Surface chemical analysis
ISO/DIS 20579-2
Surface chemical analysis — Sample handling, preparation and mounting — Part 2: Guidelines to preparation and
mounting of specimens prior to analysis
TC 202
Microbeam analysis
ISO/CD 20263
Microbeam Analysis — Analytical transmission electron microscopy — Determination methods for boundary layer positions in the cross-sectional image of the multi-layered materials
TC 212
Clinical laboratory testing and in vitro diagnostic test systems
ISO/CD 15195
Laboratory medicine — Requirements for the competence of calibration laboratories using reference measurement
procedures
TC 229
Nanotechnologies
ISO/DTR 16196
Nanotechnologies — Compilation and description of sample preparation and dosing methods for engineered and manufactured nanomaterials
JTC 1
Information technology
ISO/IEC CD 19637
Sensor Network Testing Framework
ISO/IEC CD
30140-2
Underwater acoustics sensor network — Part 2: Reference architecture
ISO/IEC CD 78169
Identification cards — Integrated circuit cards — Part 9: Commands for card management
ISO/IEC CD
29500-2
Information technology — Document description and processing languages — Office Open XML File Formats — Part 2:
Open Packaging Conventions
DIS circulated
Period from 01 October to 31 October 2015
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote
terminates
TC 12
ISO/DIS 80000-12
Quantities and units
*
Quantities and units — Part 12: Condensed matter physics
(Revision of ISO 80000-12:2009)
TC 20
ISO/DIS 8168
Aircraft and space vehicles
*
Aerospace — Bolts, with MJ threads, made of heat and corrosion resisting steel, strength class 1 100
MPa — Procurement specification
201601-13
(Revision of ISO 8168:2008)
TC 21
ISO/DIS 7240-29.2
Equipment for fire protection and fire fighting
*
Fire detection and alarm systems — Part 29: Video fire detectors
201512-14
TC 22
ISO/DIS 14230-2
Road vehicles
*
Road vehicles — Diagnostic communication over K-Line (DoK-Line) — Part 2: Data link layer
201601-23
(Revision of ISO 14230-2:2013)
ISO/DIS 17987-1.2
ISO/DIS 17987-2.2
ISO/DIS 17987-3.2
*
*
*
Road vehicles — Local Interconnect Network (LIN) — Part 1: General information and use case definition
Road vehicles — Local Interconnect Network (LIN) — Part 2: Transport protocol and network layer
services
201512-06
201512-06
Road vehicles — Local Interconnect Network (LIN) — Part 3: Protocol specification
201512-06
ISO/DIS 17987-4.2
ISO/DIS 17987-6.2
*
*
Road vehicles — Local Interconnect Network (LIN) — Part 4: Electrical Physical Layer (EPL) specification 12V/24V
201512-06
Road vehicles — Local Interconnect Network (LIN) — Part 6: Protocol conformance test specification
201512-13
ISO/DIS 22900-2.2
*
Road vehicles — Modular vehicle communication interface (MVCI) — Part 2: Diagnostic protocol data
unit (D-PDU API)
201512-23
(Revision of ISO 22900-2:2009)
ISO/DIS 8820-4
*
Road vehicles — Fuse-links — Part 4: Fuse-links with female contacts (type A) and bolt-in contacts
(type B) and their test fixtures
201601-14
(Revision of ISO 8820-4:2010)
ISO/DIS 2698
*
Diesel engines — Clamp-mounted fuel injectors, types 7 and 28
201601-07
(Revision of ISO 2698:2013)
ISO/DIS 2974
*
Diesel engines — 60 degree female cones for high-pressure fuel injection components
201601-08
(Revision of ISO 2974:2013)
ISO/DIS 13296
*
Diesel engines — High-pressure fuel injection pipe assemblies — General requirements and dimensions
201601-14
(Revision of ISO 13296:2012)
ISO/DIS 13948-2
*
Diesel engines — Fuel injection pumps and fuel injector low-pressure connections — Part 2: Nonthreaded (push-on) connections
201601-08
(Revision of ISO 13948-2:2012)
ISO/DIS 18418-1
*
Gasoline engines — Medium pressure liquid fuel supply connections — Part 1: 60° female cone connectors
201601-13
(Revision of ISO 18418-1:2014)
ISO/DIS 15501-1
*
Road vehicles — Compressed natural gas (CNG) fuel systems — Part 1: Safety requirements
201601-06
(Revision of ISO 15501-1:2012)
TC 28
ISO/DIS 13357-1
Petroleum products and related products of synthetic or biological origin
*
Petroleum products — Determination of the filterability of lubricating oils — Part 1: Procedure for oils in
the presence of water
201601-30
(Revision of ISO 13357-1:2002)
ISO/DIS 13357-2
*
Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry
oils
201601-30
(Revision of ISO 13357-2:2005)
ISO/DIS 91
*
Petroleum and related products — Temperature and pressure volume correction factors (petroleum
measurement tables) and standard reference conditions
(Revision of ISO 91-1:1992, ISO 91-2:1991, ISO 5024:1999)
201601-23
ISO/DIS 29945
*
Refrigerated non-petroleum-based liquefied gaseous fuels — Dimethylether (DME) — Method of manual sampling onshore terminals
201601-30
(Revision of ISO 29945:2009)
TC 34
ISO/DIS 18862
Food products
*
TC 39
ISO/DIS 16090-1.2
201601-07
Machine tools
*
TC 42
ISO/DIS 12234-3
Analysis of coffee and coffee products — Determination of acrylamide — Methods using HPLC-MS/MS
and GC-MS after derivatisation
Machine tools safety — Machining centres, Milling machines, Transfer machines — Part 1: Safety requirements
201512-16
Photography
*
Electronic still picture imaging — Removable memory — Part 3: XMP for digital photography
201601-30
TC 43
Acoustics
ISO/DIS 11819-2.2
*
Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 2: The closeproximity method
ISO/DIS 18406
*
Underwater acoustics — Measurement of underwater radiated sound from percussive pile driving
201601-23
TC 61
ISO/DIS 9994
Plastics
*
Lighters — Safety specification
201601-16
(Revision of ISO 9994:2005)
ISO/DIS 22702
*
Utility Lighters — Safety specifications
201601-16
(Revision of ISO 22702:2003, ISO 22702:2003/Amd 1:2008)
TC 67
ISO/DIS 20088-1
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
*
Determination of the resistance to cryogenic spillage of insulation materials — Part 1: Liquid phase
201601-23
TC 83
ISO/DIS 19202-1
Sports and other recreational facilities and equipment
*
Summer toboggan runs — Part 1: Safety requirements and test methods
201601-23
ISO/DIS 19202-2
*
Summer toboggan runs — Part 2: Safety requirements for operation
201601-23
ISO/DIS 23537-1
*
Requirements for sleeping bags — Part 1: Thermal and dimensional requirements
201601-23
ISO/DIS 23537-2
*
Requirements for sleeping bags — Part 2: Fabric and material properties
201601-23
TC 85
ISO/DIS 7195
Nuclear energy, nuclear technologies, and radiological protection
*
Nuclear energy — Packagings for the transport of uranium hexafluoride (UF6)
201601-23
(Revision of ISO 7195:2005)
TC 86
ISO/DIS 5151
Refrigeration and air-conditioning
*
Non-ducted air conditioners and heat pumps — Testing and rating for performance
201601-30
(Revision of ISO 5151:2010)
ISO/DIS 13253
*
Ducted air-conditioners and air-to-air heat pumps — Testing and rating for performance
201601-30
(Revision of ISO 13253:2011)
ISO/DIS 15042
*
Multiple split-system air-conditioners and air-to-air heat pumps — Testing and rating for performance
201601-30
(Revision of ISO 15042:2011)
TC 94
ISO/DIS 17493
Personal safety -- Protective clothing and equipment
*
Clothing and equipment for protection against heat — Test method for convective heat resistance using
a hot air circulating oven
201601-30
(Revision of ISO 17493:2000)
ISO/DIS 22610
*
Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and
equipment — Test method to determine the resistance to wet bacterial penetration
201601-23
(Revision of ISO 22610:2006)
TC 104
ISO/DIS 1161
Freight containers
*
Series 1 freight containers — Corner and intermediate fittings — Specification
201601-07
(Revision of ISO 1161:1984, ISO 1161:1984/Cor 1:1990, ISO 1161:1984/Amd 1:2007)
TC 108
Mechanical vibration, shock and condition monitoring
ISO/DIS 2041
*
Mechanical vibration, shock and condition monitoring — Vocabulary
201601-30
(Revision of ISO 2041:2009)
TC 122
ISO/DIS 18616-1
ISO/DIS 18616-2
Packaging
*
*
TC 130
ISO/DIS 17972-2
Transport packaging — Reusable, rigid plastics distribution boxes — Part 1: General purpose application
Transport packaging — Reusable, rigid plastics distribution boxes — Part 2: General specifications for
testing
201601-13
201601-13
Graphic technology
*
Graphic technology — Colour data exchange format (CxF/X) — Part 2: Scanner target data (CxF/X-2)
201601-13
TC 138
ISO/DIS 21307
Plastics pipes, fittings and valves for the transport of fluids
*
Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) pipes and fittings
used in the construction of gas and water distribution systems
201601-30
(Revision of ISO 21307:2011)
TC 147
ISO/DIS 11731
Water quality
*
Water quality — Enumeration of Legionella
201601-30
(Revision of ISO 11731:1998, ISO 11731-2:2004)
TC 153
ISO/DIS 6553
Valves
*
Automatic steam traps — Marking
201601-23
(Revision of ISO 6553:1980)
TC 157
ISO/DIS 19671
Non-systemic contraceptives and STI barrier prophylactics
*
Additional Lubricants for Condoms — Effect on Condom Strength
201601-08
TC 159
ISO/DIS 10075-1
Ergonomics
*
Ergonomic principles related to mental work-load — Part 1: General concepts, terms and definitions
201601-30
(Revision of ISO 10075:1991)
TC 161
ISO/DIS 23551-10
Control and protective devices for gas and/or oil burners and appliances
*
Safety and control devices for gas burners and gas-burning appliances — Particular requirements —
Part 10: Vent valves
TC 163
ISO/DIS 18523-1
Thermal performance and energy use in the built environment
*
TC 171
ISO/DIS 18829
201601-23
Energy performance of buildings — Schedule and condition of building, zone and room usage for energy calculation — Part 1: Non-residential buildings
201601-13
Document management applications
*
Document management — Assessing ECM/EDRM Implemenations - Trustworthiness
201601-23
TC 172
ISO/DIS 10938.2
Optics and photonics
*
Ophthalmic optics — Chart displays for visual acuity measurement — Printed, projected and electronic
201512-23
(Revision of ISO 10938:1998)
TC 188
ISO/DIS 8099
Small craft
*
Small craft — Toilet waste retention systems
201601-23
(Revision of ISO 8099:2000)
ISO
15085:2003/DAmd
2
*
201601-16
TC 190
ISO/DIS 18400204
Soil quality
*
ISO/DIS 19080
Soil quality — Sampling — Part 204: Guidance on sampling of soil gas
201601-16
TC 204
ISO/DIS 19079
Small craft — Man-overboard prevention and recovery — Amendment 2
Intelligent transport systems
*
*
Intelligent Transport Systems — Communications access for land mobiles (CALM) — 6LoWPAN networking
201601-08
Intelligent Transport Systems — Communications access for land mobiles (CALM) - CoAP facility
201601-07
TC 206
ISO/DIS 14704
Fine ceramics
*
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength
of monolithic ceramics at room temperature
201601-23
(Revision of ISO 14704:2008)
ISO/DIS 20808
*
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of friction and wear
characteristics of monolithic ceramics by ball-on-disc method
2016-
01-30
(Revision of ISO 20808:2004)
ISO/DIS 22197-1
*
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification
performance of semiconducting photocatalytic materials — Part 1: Removal of nitric oxide
201601-30
(Revision of ISO 22197-1:2007)
TC 218
ISO/DIS 13061-11
Timber
*
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part
11: Determination of resistance to impact indentation
201601-23
(Revision of ISO 3351:1975)
TC 219
ISO/DIS 20326
Floor coverings
*
Resilient floor coverings — Specification for floor panels for loose laying
201601-16
TC 224
ISO/DIS 24523
Service activities relating to drinking water supply systems and wastewater systems Quality criteria of the service and performance indicators
*
TC 249
ISO/DIS 19465
201601-16
Traditional chinese medicine
*
TC 267
ISO/DIS 18480-1
Service activities relating to drinking water supply systems and wastewater systems — Guidelines for
benchmarking of water utilities
Traditional Chinese Medicine — Categories of TCM Clinical
Terminological System
201601-23
Facilities management
*
Facility management — Part 1: Terms and definitions
201601-27
ISO/DIS 18480-2
*
Facilities Management — Part 2: Guidance on strategic sourcing and the development of agreements
201601-27
CASCO
ISO/DIS 17034
Committee on conformity assessment
*
General requirements for the competence of reference material producers
201601-23
(Revision of ISO Guide 34:2009)
JTC 1
Information technology
ISO/IEC DIS
20802-1
*
ISO/IEC DIS
*
Information technology — Open data (OData) protocol — Part 1: Protocol plus errata 02
201601-30
Information technology — Open data (OData) protocol — Part 2: JSON format version 4.0 plus errata
20802-2
02
ISO/IEC DIS
20919
*
ISO/IEC DIS
20922
*
ISO/IEC DIS
20933
*
ISO/IEC DIS
29110-3-3
*
ISO/IEC DIS
19752
*
201601-30
Information technology — Linear tape file system (LTFS) format specification
201601-08
Information technology — Message Queuing Telemetry Transport (MQTT) v3.1.1
201601-08
Information technology — Distributed application platforms and services (DAPS) — Access systems
201601-13
Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 3-3: Certification requirements for process capability
Information technology — Office equipment — Method for the determination of toner cartridge yield for
monochromatic electrophotographic printers and multi-function devices that contain printer components
201601-23
201601-13
(Revision of ISO/IEC 19752:2004, ISO/IEC 19752:2004/Cor 1:2012)
ISO/IEC 138181:2015/DAmd 6
*
Information technology — Generic coding of moving pictures and associated audio information — Part
1: Systems — Amendment 6: Carriage of Quality Metadata in MPEG-2 Systems
ISO/IEC DIS
15938-6
*
Information technology — Multimedia content description interface — Part 6: Reference software
201601-30
(Revision of ISO/IEC 15938-6:2003, ISO/IEC 15938-6:2003/Amd 1:2006, ISO/IEC 15938-6:2003/Amd
2:2007, ISO/IEC 15938-6:2003/Amd 3:2010, ISO/IEC 15938-6:2003/Amd 4:2011)
ISO/IEC DIS
18477-8
*
ISO/IEC DIS
18477-9
*
ISO/IEC DIS
23000-16
*
ISO/IEC 2300111:2015/DAmd 1
*
ISO/IEC DIS
23006-2
*
Information technology — Scalable Compression and Coding of Continuous-Tone Still Images — Part
8: Lossless and Near-lossless Coding
Information technology — Scalable Compression and Coding of Continuous-Tone Still Images — Part
9: Alpha Channel Coding
Information technology — Multimedia application format (MPEG-A) — Part 16: Publish/Subscribe Application Format
Information technology — MPEG systems technologies — Part 11: Energy-efficient media consumption
(green metadata) — Amendment 1: Carriage of Green Metadata in an HEVC SEI Message
Information technology - Multimedia service platform technologies — Part 2: MPEG extensible middleware (MXM) API
201601-23
201601-23
201601-30
201601-06
201601-06
(Revision of ISO/IEC 23006-2:2013)
ISO/IEC DIS
23006-3
*
Information technology - Multimedia service platform technologies — Part 3: Conformance and reference software
2016-
01-06
(Revision of ISO/IEC 23006-3:2013)
ISO/IEC 230083:2015/DAmd 2.2
*
ISO/IEC 291992:2012/DAmd 1
*
ISO/IEC DIS
30105-2
*
ISO/IEC DIS
30105-3
*
ISO/IEC DIS
30105-4
*
ISO/IEC DIS
30105-5
*
Information technology — High efficiency coding and media delivery in heterogeneous environments —
Part 3: 3D audio — Amendment 2: MPEG-H 3D Audio File Format Support
Information technology — JPEG XR image coding system — Part 2: Image coding specification —
Amendment 1
Information technology - IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes — Part 2: Process assessment model
Information technology - IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes — Part 3: Measurement framework and organizational maturity model
Information technology - IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes — Part 4: Terms and concepts
Information technology - IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes — Part 5: Guidelines
201512-30
201601-30
201601-30
201601-16
201601-16
201601-16
FDIS circulated
Period from 01 October to 31 October 2015
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote
terminates
TC 17
ISO/FDIS 11970.2
Steel
*
Specification and approval of welding procedures for production welding of steel castings
201512-09
(Revision of ISO 11970:2001)
TC 20
ISO/FDIS 10959
Aircraft and space vehicles
*
Aerospace — MJ threads — Gauging
201512-17
(Revision of ISO 10959:2000)
ISO/FDIS 12260
*
Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank,
short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or
equal to 1 100 MPa — Dimensions
201512-23
(Revision of ISO 12260:1996)
ISO/FDIS 12261
*
Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter
shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or
equal to 1 100 MPa — Dimensions
201512-17
(Revision of ISO 12261:1996)
ISO/FDIS 9206
*
Aerospace series — Constant displacement hydraulic motors — General specifications
201512-28
(Revision of ISO 9206:1990, ISO 12333:2000)
TC 22
ISO/FDIS 10924-1
Road vehicles
*
Road vehicles — Circuit breakers — Part 1: Definitions and general test requirements
201512-17
(Revision of ISO 10924-1:2009)
ISO/FDIS 10924-5
*
Road vehicles — Circuit breakers — Part 5: Circuit breakers with tabs with rated voltage of 450 V
201512-17
TC 29
ISO/FDIS 16916
Small tools
*
Tools for moulding — Tool specification sheet for injection moulds
201512-19
(Revision of ISO 16916:2004)
ISO/FDIS 3286
*
Single point cutting tools — Corner radii
201512-21
(Revision of ISO 3286:1976)
ISO/FDIS 3365
*
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions
201512-19
(Revision of ISO 3365:1985)
ISO/FDIS 3466
*
Machine taper pin reamers with parallel shanks
201512-21
(Revision of ISO 3466:1975)
ISO/FDIS 3467
*
Machine taper pin reamers with Morse taper shanks
201512-17
(Revision of ISO 3467:1975)
ISO/FDIS 10145-1
*
End mills with brazed helical hardmetal tips — Part 1: Dimensions of end mills with parallel shank
201512-17
(Revision of ISO 10145-1:1993)
ISO/FDIS 10145-2
*
End mills with brazed helical hardmetal tips — Part 2: Dimensions of end mills with 7/24 taper shank
201512-17
(Revision of ISO 10145-2:1993)
TC 30
ISO/FDIS 5167-5
Measurement of fluid flow in closed conduits
*
TC 34
ISO/FDIS 13904
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section
conduits running full — Part 5: Cone meters
201512-30
Food products
*
Animal feeding stuffs — Determination of tryptophan content
201512-30
(Revision of ISO 13904:2005)
ISO/FDIS 6885
*
Animal and vegetable fats and oils — Determination of anisidine value
201512-30
(Revision of ISO 6885:2006)
ISO
29841:2009/FDAm
d1
*
ISO
5495:2005/FDAmd
1
*
ISO/FDIS 13299
*
Vegetable fats and oils — Determination of the degradation products of chlorophylls a and a' (pheophytins a, a' and pyropheophytins) — Amendment 1
201512-16
Sensory analysis — Methodology — Paired comparison test — Amendment 1
201512-16
Sensory analysis — Methodology — General guidance for establishing a sensory profile
(Revision of ISO 13299:2003)
ISO/FDIS 16577
*
Molecular biomarker analysis — Terms and definitions
201512-17
TC 35
ISO/FDIS 2811-1
Paints and varnishes
*
Paints and varnishes — Determination of density — Part 1: Pycnometer method
201512-23
(Revision of ISO 2811-1:2011)
TC 38
ISO/FDIS 18254
Textiles
*
TC 43
ISO/FDIS 389-3
Textiles — Method for the detection and determination of alkylphenol ethoxylates (APEO)
Acoustics
*
Acoustics — Reference zero for the calibration of audiometric equipment — Part 3: Reference equivalent threshold vibratory force levels for pure tones and bone vibrators
(Revision of ISO 389-3:1994, ISO 389-3:1994/Cor 1:1995)
ISO/FDIS 1996-1
*
Acoustics — Description, measurement and assessment of environmental noise — Part 1: Basic quantities and assessment procedures
201512-28
(Revision of ISO 1996-1:2003)
ISO/FDIS 16283-3
*
Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 3:
Façade sound insulation
(Revision of ISO 140-5:1998)
TC 44
ISO/FDIS 669
Welding and allied processes
*
Resistance welding — Resistance welding equipment — Mechanical and electrical requirements
(Revision of ISO 669:2000)
ISO/FDIS 15614-7
*
Specification and qualification of welding procedures for metallic materials — Welding procedure test —
Part 7: Overlay welding
(Revision of ISO 15614-7:2007)
ISO/FDIS 15614-8
*
Specification and qualification of welding procedures for metallic materials — Welding procedure test —
Part 8: Welding of tubes to tube-plate joints
(Revision of ISO 15614-8:2002)
ISO/FDIS 17662
*
Welding — Calibration, verification and validation of equipment used for welding, including ancillary
activities
201512-23
(Revision of ISO 17662:2005)
ISO/FDIS 9454-1
*
Soft soldering fluxes — Classification and requirements — Part 1: Classification, labelling and packaging
(Revision of ISO 9454-1:1990)
TC 61
ISO/FDIS 4892-3
Plastics
*
Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
201512-23
(Revision of ISO 4892-3:2013)
ISO/FDIS 17855-2
*
Plastics — Polyethylene (PE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
201512-16
(Revision of ISO 1872-2:2007)
ISO/FDIS 19069-2
*
Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
201512-23
(Revision of ISO 1873-2:2007)
ISO/FDIS 30012
*
Carbon-fibre-reinforced plastics — Determination of the size and aspect ratio of crushed objects
201512-20
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO/FDIS 17348
Petroleum and natural gas industries — Materials selection for high content CO2 environment for casings, tubings and downhole equipment
ISO/FDIS 17349
ISO/FDIS 19901-5
*
*
Petroleum and natural gas industries — Guidelines for offshore platforms handling streams with high
content of CO2 at high pressures
Petroleum and natural gas industries — Specific requirements for offshore structures — Part 5: Weight
control during engineering and construction
201512-30
201512-09
201512-30
(Revision of ISO 19901-5:2003)
ISO/FDIS 19905-1
*
Petroleum and natural gas industries — Site-specific assessment of mobile offshore units — Part 1:
Jack-ups
(Revision of ISO 19905-1:2012)
TC 70
ISO/FDIS 8528-8
Internal combustion engines
*
Reciprocating internal combustion engine driven alternating current generating sets — Part 8: Generating sets
201512-21
(Revision of ISO 8528-8:1995)
ISO/FDIS 8528-13
*
Reciprocating internal combustion engine driven alternating current generating sets — Part 13: Safety
201512-23
TC 76
ISO/FDIS 8362-5
Transfusion, infusion and injection, and blood processing equipment for medical and
pharmaceutical use
*
Injection containers and accessories — Part 5: Freeze drying closures for injection vials
(Revision of ISO 8362-5:2008)
TC 83
ISO/FDIS 20187
Sports and other recreational facilities and equipment
*
TC 85
ISO/FDIS 7503-3
Inflatable play equipment — Safety requirements and test methods
Nuclear energy, nuclear technologies, and radiological protection
*
Measurement of radioactivity — Measurement and evaluation of surface contamination — Part 3: Appa-
ratus calibration
201512-07
(Revision of ISO 7503-3:1996)
TC 107
ISO/FDIS 11177
ISO/FDIS 18555
ISO/FDIS 28721-5
ISO/FDIS 17668
Metallic and other inorganic coatings
*
*
*
*
TC 114
ISO/FDIS 3764
Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for
untreated and potable water supply — Quality requirements and testing
Metallic and other inorganic coatings — Determination of thermal conductivity of thermal barrier coatings
Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 5: Presentation and
characterization of defects
201512-23
201512-17
201512-23
Zinc diffusion coatings on ferrous products — Sherardizing — Specification
Horology
*
Timekeeping instruments — Movements — Types, dimensions and nomenclature
201512-17
(Revision of ISO 3764:2000)
TC 119
ISO/FDIS 4499-3
ISO/FDIS 4499-4
Powder metallurgy
*
*
Hardmetals — Metallographic determination of microstructure — Part 3: Measurement of microstructural features in Ti (C, N) and WC/Cubic carbide based hardmetals
Hardmetals — Metallographic determination of microstructure — Part 4: Characterisation of porosity,
carbon defects and eta-phase content
201512-30
201512-30
(Revision of ISO 4505:1978)
TC 121
ISO/FDIS 14408
Anaesthetic and respiratory equipment
*
Tracheal tubes designed for laser surgery — Requirements for marking and accompanying information
201512-30
(Revision of ISO 14408:2005)
TC 127
ISO/FDIS 8812.2
Earth-moving machinery
*
Earth-moving machinery — Backhoe loaders — Definitions and commercial specifications
201512-19
(Revision of ISO 8812:1999)
TC 131
ISO/FDIS 15171-2
Fluid power systems
*
Connections for fluid power and general use — Hydraulic couplings for diagnostic purposes — Part 2:
Coupling for connection under pressure
2015-
12-21
(Revision of ISO 15171-2:2000)
TC 138
ISO/FDIS 8639
Plastics pipes, fittings and valves for the transport of fluids
*
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods for leaktightness and
proof of structural design of flexible joints
201512-28
(Revision of ISO 8639:2000)
TC 147
ISO/FDIS 17294-2
Water quality
*
Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 2: Determination of selected elements including uranium isotopes
201512-30
(Revision of ISO 17294-2:2003)
ISO/FDIS 19820
*
Water quality — Determination of the acute toxicity to the marine rotifer Brachionus plicatilis
201512-27
ISO/FDIS 19827
*
Water quality — Determination of the acute toxicity to the freshwater rotifer Brachionus calyciflorus
201512-27
TC 159
ISO/FDIS 27500
Ergonomics
*
Human-centred organisation — Rationale and general principles
201512-21
ISO/FDIS 9241161
*
201512-16
TC 172
ISO/FDIS 10322-2
Ergonomics of human-system interaction — Part 161: Guidance on visual user-interface elements
Optics and photonics
*
Ophthalmic optics — Semi-finished spectacle lens blanks — Part 2: Specifications for progressivepower and degressive-power lens blanks
(Revision of ISO 10322-2:2006)
ISO/FDIS 10685-2
*
Ophthalmic optics — Spectacle frames and sunglasses electronic catalogue and identification — Part 2:
Commercial information
201512-23
(Revision of ISO 10685-2:2012)
TC 188
ISO/FDIS 11592-1
Small craft
*
Small craft — Determination of maximum propulsion power rating using manoeuvring speed — Part 1:
Craft with a length of hull less than 8 m
(Revision of ISO 11592:2001)
TC 190
ISO/FDIS 15009
Soil quality
*
Soil quality — Gas chromatographic determination of the content of volatile aromatic hydrocarbons,
201512-16
naphthalene and volatile halogenated hydrocarbons — Purge-and-trap method with thermal desorption
201512-23
(Revision of ISO 15009:2012)
ISO/FDIS 17586
*
Soil quality — Extraction of trace elements using dilute nitric acid
201512-21
ISO/FDIS 22155
*
Soil quality — Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons
and selected ethers — Static headspace method
201512-23
(Revision of ISO 22155:2011)
TC 210
ISO/FDIS 13485
Quality management and corresponding general aspects for medical devices
*
Medical devices — Quality management systems — Requirements for regulatory purposes
201512-30
(Revision of ISO 13485:2003, ISO 13485:2003/Cor 1:2009)
TC 213
Dimensional and geometrical product specifications and verification
ISO/FDIS 1036010
*
ISO/FDIS 14405-1
*
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 10: Laser trackers for measuring point-to-point distances
201512-16
Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes
201512-16
(Revision of ISO 14405-1:2010)
TC 215
ISO/FDIS 16278
Health informatics
*
Health informatics — Categorial structure for terminologies systems of human anatomy
201512-16
TC 219
ISO/FDIS 4918
Floor coverings
*
Resilient, textile and laminate floor coverings — Castor chair test
201512-27
(Revision of ISO 4918:2009)
IULTCS
ISO/FDIS 2417
International Union of Leather Technologists and Chemists Societies
*
Leather — Physical and mechanical tests — Determination of the static absorption of water
201512-23
(Revision of ISO 2417:2002)
ISO/FDIS 2589
*
Leather — Physical and mechanical tests — Determination of thickness
201512-23
(Revision of ISO 2589:2002)
ISO/FDIS 3377-2
*
Leather — Physical and mechanical tests — Determination of tear load — Part 2: Double edge tear
201512-23
(Revision of ISO 3377-2:2002)
ISO/FDIS 17229
*
Leather — Physical and mechanical tests — Determination of water vapour absorption
201512-23
(Revision of ISO 17229:2002)
ISO/FDIS 17236
*
Leather — Physical and mechanical tests — Determination of extension set
201512-23
(Revision of ISO 17236:2002)
JTC 1
Information technology
ISO/IEC/IEEE
FDIS 18881
*
ISO/IEC/IEEE
FDIS 18883
*
ISO/IEC 138181:2015/FDAmd 2
*
ISO/IEC 138181:2015/FDAmd 3
*
ISO/IEC FDIS
18477-6
*
ISO/IEC FDIS
18477-7
*
Information technology — Ubiquitous green community control network — Control and management
201603-06
Information technology — Ubiquitous green community control network — Security
201603-06
Information technology — Generic coding of moving pictures and associated audio information — Part
1: Systems — Amendment 2: Carriage of layered HEVC
Information technology — Generic coding of moving pictures and associated audio information — Part
1: Systems — Amendment 3: Carriage of green metadata in MPEG2 systems
Information technology — Scalable compression and coding of continuous-tone still images — Part 6:
IDR Integer Coding
Information technology — Scalable compression and coding of continuous-tone still images — Part 7:
HDR Floating-Point Coding
Information technology — MPEG systems technologies — Part 7: Common encryption in ISO base
media file format files
ISO/IEC FDIS
23001-7
201512-03
201512-03
201512-15
201512-15
201512-28
(Revision of ISO/IEC 23001-7:2015)
ISO/IEC FDIS
29167-19
*
Information technology — Automatic identification and data capture techniques — Part 19: Crypto suite
RAMON security services for air interface communications
201512-08
Standards published
New International Standards published between 01 October and 31 October 2015
* Available in English only
** French version of standard previously published in English only
Price
group
TC 6
Paper, board and pulps
ISO 5631-1:2015
Paper and board — Determination of colour by diffuse reflectance — Part 1: Indoor daylight conditions
(C/2 degrees)
C
Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10 degrees)
C
Paper and board — Determination of colour by diffuse reflectance — Part 3: Indoor illumination conditions (D50/2 degrees)
C
ISO 5631-2:2015
ISO 5631-3:2015
TC 17
ISO 16143-1:2014
Steel
*
Stainless steels for general purposes — Part 1: Corrosion-resistant flat products
F
ISO 13520:2015
*
Determination of ferrite content in austenitic stainless steel castings
B
ISO 13521:2015
*
Austenitic manganese steel castings
A
ISO 16468:2015
*
Investment castings (steel, nickel alloys and cobalt alloys) — General technical requirements
B
TC 20
Aircraft and space vehicles
ISO 8267-1:2015
Aircraft — Tow bar attachment fittings interface requirements — Part 1: Main line aircraft
A
Aircraft — Tow bar attachment fittings interface requirements — Part 2: Regional aircraft
ISO 8267-2:2015
A
ISO 16682:2015
*
Aerospace series — Terminology for clamping devices
A
ISO 12208:2015
ISO 17689:2015
ISO/TR
18146:2015
*
*
*
ISO 7637-1:2015
ISO 17409:2015
ISO 1550015:2015
C
Space systems — Space debris mitigation design and operation guidelines for spacecraft
Road vehicles
*
*
*
*
TC 23
ISO 13460-1:2015
Space systems — Interface control documents between ground systems, ground support equipment
and launch vehicle with payload
B
F
TC 22
ISO 18541-4:2015
Space systems — Space environment (natural and artificial) — Observed proton fluences over long
duration at GEO and guidelines for selection of confidence level in statistical model of solar proton fluences
Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part
4: Conformance test
G
Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations
B
Electrically propelled road vehicles — Connection to an external electric power supply — Safety requirements
D
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 15: Gas-tight housing and ventilation hose
A
Tractors and machinery for agriculture and forestry
*
Agricultural irrigation equipment — Plastics saddles — Part 1: Polyethylene pressure pipes
B
ISO 18471:2015
*
Agricultural irrigation equipment — Filters — Verification of filtration grade
B
TC 34
Food products
ISO 17604:2015
Microbiology of the food chain — Carcass sampling for microbiological analysis
C
TC 41
Pulleys and belts (including veebelts)
ISO 283:2015
Textile conveyor belts — Full thickness tensile strength, elongation at break and elongation at the reference load — Test method
ISO 7622-2:2015
B
Steel cord conveyor belts — Longitudinal traction test — Part 2: Measurement of tensile strength
A
ISO 7623:2015
Steel cord conveyor belts — Cord-to-coating bond test — Initial test and after thermal treatment
A
TC 44
Welding and allied processes
ISO 9018:2015
Destructive tests on welds in metallic materials — Tensile test on cruciform and lapped joints
B
ISO 17641-2:2015
TC 45
Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 2: Self-restraint tests
Rubber and rubber products
C
ISO 13775-1:2015
*
Thermoplastic tubing and hoses for automotive use — Part 1: Non-fuel applications
C
ISO 289-3:2015
ISO 5893:2002
TC 46
ISO 30302:2015
Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 3: Determination of
the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR
A
Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Specification
A
Information and documentation
*
Information and documentation — Management systems for records — Guidelines for implementation
E
TC 58
Gas cylinders
ISO 9809-1:2010
Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 1:
Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa
F
Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 2:
Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa
F
Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 3:
Normalized steel cylinders
F
ISO 9809-2:2010
ISO 9809-3:2010
TC 61
ISO 4586-1:2015
ISO 4586-2:2015
ISO 4586-3:2015
ISO 4586-4:2015
ISO 4586-5:2015
ISO 4586-6:2015
ISO 4586-7:2015
ISO 4586-8:2015
Plastics
*
*
*
*
*
*
*
*
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually
called Laminates) — Part 1: Introduction and general information
A
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually
called Laminates) — Part 2: Determination of properties
H
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually
called Laminates) — Part 3: Classification and specifications for laminates less than 2 mm thick and
intended for bonding to supporting substrates
C
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually
called Laminates) — Part 4: Classification and specifications for compact laminates of thickness 2 mm
and greater
B
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually
called Laminates) — Part 5: Classification and specifications for flooring grade laminates less than 2
mm thick intended for bonding to supporting substrates
B
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually
called Laminates) — Part 6: Classification and specifications for exterior-grade compact laminates of
thickness 2 mm and greater
B
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually
called Laminates) — Part 7: Classification and specifications for design laminates
D
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually
called Laminates) — Part 8: Classification and specifications for alternative core laminates
C
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 17945:2015
Petroleum, petrochemical and natural gas industries — Metallic materials resistant to sulfide stress
cracking in corrosive petroleum refining environments
F
ISO 21329:2004
ISO 19901-1:2015
*
TC 68
ISO 18774:2015
Petroleum and natural gas industries — Pipeline transportation systems — Test procedures for mechanical connectors
H
Petroleum and natural gas industries — Specific requirements for offshore structures — Part 1:
Metocean design and operating considerations
H
Financial services
*
Securities and related financial instruments — Financial Instrument Short Name (FISN)
B
TC 70
Internal combustion engines
ISO 7967-10:2014
Reciprocating internal combustion engines — Vocabulary of components and systems — Part 10: Ignition systems
B
Reciprocating internal combustion engines — Vocabulary of components and systems — Part 11: Fuel
systems
D
ISO 7967-11:2014
TC 76
Transfusion, infusion and injection, and blood processing equipment for medical and
pharmaceutical use
ISO 15378:2015
Primary packaging materials for medicinal products — Particular requirements for the application of ISO
9001:2008, with reference to Good Manufacturing Practice (GMP)
TC 86
Refrigeration and air-conditioning
ISO 51491:2014/Amd
1:2015
Refrigerating systems and heat pumps — Safety and environmental requirements — Part 1: Definitions,
classification and selection criteria — Amendment 1: Correction of QLAV, QLMV
ISO 23953-1:2015
Refrigerated display cabinets — Part 1: Vocabulary
G
XZ
A
Refrigerated display cabinets — Part 2: Classification, requirements and test conditions
ISO 23953-2:2015
H
TC 87
Cork
ISO 10718:2015
Cork stoppers — Characterization of a low-in-germs stopper, through the enumeration of colonyforming units of yeasts, moulds and bacteria, capable of both being extracted and growing in alcoholic
medium
TC 89
Wood-based panels
ISO 12460-3:2015
Wood-based panels — Determination of formaldehyde release — Part 3: Gas analysis method
A
B
TC 92
Fire safety
ISO 19702:2015
Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform
Infrared (FTIR) spectroscopy
TC 94
ISO 16900-6:2015
G
Personal safety -- Protective clothing and equipment
*
Respiratory protective devices — Methods of test and test equipment — Part 6: Mechanical resistance/strength of components and connections
D
ISO 16900-9:2015
*
ISO 1690010:2015
*
ISO 1690013:2015
*
TC 102
ISO/TR
16043:2015
C
Respiratory protective devices — Methods of test and test equipment — Part 10: Resistance to ignition,
flame, radiant heat and heat
D
Respiratory protective devices — Methods of test and test equipment — Part 13: RPD using regenerated breathable gas and special application mining escape RPD: Consolidated test for gas concentration,
temperature, humidity, work of breathing, breathing resistance, elastance and duration
*
Iron ores — Determination of chlorine content — X-ray fluorescence spectrometric method
C
Metallic and other inorganic coatings
*
ISO 28764:2015
Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings
A
Vitreous and porcelain enamels — Production of specimens for testing enamels on sheet steel, sheet
aluminium and cast iron
A
TC 108
Mechanical vibration, shock and condition monitoring
ISO 13373-3:2015
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 3: Guidelines for vibration diagnosis
TC 110
ISO 5053-1:2015
B
Iron ore and direct reduced iron
TC 107
ISO 28721-4:2015
Respiratory protective devices — Methods of test and test equipment — Part 9: Determination of carbon dioxide content of the inhaled gas
F
Industrial trucks
*
Industrial trucks — Terminology and classification — Part 1: Types of industrial trucks
H
ISO 11525-2:2015
*
Rough-terrain trucks — User requirements — Part 2: Slewing variable-reach trucks
C
TC 113
ISO 26906:2015
Hydrometry
*
Hydrometry — Fishpasses at flow measurement structures
F
TC 114
Horology
ISO 19235:2015
Analogue quartz clocks — Timing accuracy
B
TC 121
Anaesthetic and respiratory equipment
ISO 10079-1:2015
Medical suction equipment — Part 1: Electrically powered suction equipment
E
TC 126
Tobacco and tobacco products
ISO/TR 194782:2015
ISO and Health Canada intense smoking parameters — Part 2: Examination of factors contributing to
variability in the routine measurement of TPM, water and NFDPM smoke yields of cigarettes
ISO/TS 35503:2015
*
G
Cigarettes — Determination of loss of tobacco from the ends — Part 3: Method using a vibro-bench
B
TC 130
ISO 126476:2012/Amd
1:2015
Graphic technology
*
Graphic technology — Process control for the production of half-tone colour separations, proofs and
production prints — Part 6: Flexographic printing — Amendment 1
TC 131
Fluid power systems
ISO 4393:2015
Fluid power systems and components — Cylinders — Basic series of piston strokes
XZ
A
Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components
— Part 1: Method for determining source flow ripple and source impedance of pumps
ISO 10767-1:2015
TC 146
Air quality
ISO 17211:2015
Stationary source emissions — Sampling and determination of selenium compounds in flue gas
E
D
TC 157
Non-systemic contraceptives and STI barrier prophylactics
ISO 4074:2015
Natural rubber latex male condoms — Requirements and test methods
G
TC 172
ISO 8600-1:2015
Optics and photonics
*
Endoscopes — Medical endoscopes and endotherapy devices — Part 1: General requirements
C
ISO/TS
18340:2015
*
B
TC 181
ISO 8124-7:2015
Endoscopes — Trocar pins, trocar sleeves and endotherapy devices for use with trocar sleeves
Safety of toys
*
Safety of toys — Part 7: Requirements and test methods for finger paints
G
TC 188
Small craft
ISO 12217-1:2015
Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-sailing boats of hull
length greater than or equal to 6 m
G
Small craft — Stability and buoyancy assessment and categorization — Part 2: Sailing boats of hull
length greater than or equal to 6 m
H
Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less
than 6 m
G
ISO 12217-2:2015
ISO 12217-3:2015
TC 193
ISO/TR
12748:2015
Natural gas
*
Natural Gas — Wet gas flow measurement in natural gas operations
H
TC 199
Safety of machinery
ISO 14123-1:2015
Safety of machinery — Reduction of risks to health resulting from hazardous substances emitted by
machinery — Part 1: Principles and specifications for machinery manufacturers
TC 201
Surface chemical analysis
B
ISO 11775:2015
*
TC 204
ISO 14817-1:2015
ISO 14817-2:2015
Surface chemical analysis — Scanning-probe microscopy — Determination of cantilever normal spring
constants
D
Intelligent transport systems
*
*
ISO/TR 174272:2015
*
ISO/TR 174273:2015
*
ISO/TR 174274:2015
*
ISO/TR 174276:2015
*
ISO/TR 174277:2015
*
ISO/TR 174278:2015
*
ISO/TR 174279:2015
*
ISO/TR 1742710:2015
*
ISO/TR
19639:2015
*
Intelligent transport systems — ITS central data dictionaries — Part 1: Requirements for ITS data definitions
G
Intelligent transport systems — ITS central data dictionaries — Part 2: Governance of the Central ITS
Data Concept Registry
D
Intelligent transport systems — Cooperative ITS — Part 2: Framework overview
E
Intelligent transport systems — Cooperative ITS — Part 3: Concept of operations (ConOps) for 'core'
systems
H
Intelligent transport systems — Cooperative ITS — Part 4: Minimum system requirements and behaviour for core systems
F
Intelligent transport systems — Cooperative ITS — Part 6: 'Core system' risk assessment methodology
D
Intelligent transport systems — Cooperative ITS — Part 7: Privacy aspects
D
Intelligent transport systems — Cooperative ITS — Part 8: Liability aspects
D
Intelligent transport systems — Cooperative ITS — Part 9: Compliance and enforcement aspects
C
Intelligent transport systems — Cooperative ITS — Part 10: Driver distraction and information display
D
Electronic fee collection — Investigation of EFC standards for common payment schemes for multimodal transport services
E
Public transport — Interoperable fare management system — Part 1: Architecture
ISO 24014-1:2015
G
ISO/TR 240972:2015
*
Intelligent transport systems — Using web services (machine-machine delivery) for ITS service delivery
— Part 2: Elaboration of interoperable web services' interfaces
D
TC 206
Fine ceramics
ISO 13383-1:2012
Fine ceramics (advanced ceramics, advanced technical ceramics) — Microstructural characterization —
Part 1: Determination of grain size and size distribution
D
Fine ceramics (advanced ceramics, advanced technical ceramics) — Microstructural characterization —
Part 2: Determination of phase volume fraction by evaluation of micrographs
B
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of bulk density of
ceramic powders — Part 1: Tap density
A
ISO 13383-2:2012
ISO 23145-1:2007
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of bulk density of
ceramic powders — Part 2: Untapped density
ISO 23145-2:2012
TC 211
Geographic information/Geomatics
ISO 19150-2:2015
Geographic information — Ontology — Part 2: Rules for developing ontologies in the Web Ontology
Language (OWL)
TC 213
Dimensional and geometrical product specifications and verification
ISO 1938-1:2015
Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit
gauges of linear size
ISO 1661030:2015
Geometrical product specifications (GPS) — Filtration — Part 30: Robust profile filters: Basic concepts
ISO 1661060:2015
Geometrical product specification (GPS) — Filtration
— Part 60: Linear areal filters — Basic concepts
TC 234
Fisheries and aquaculture
ISO 18537:2015
Traceability of crustacean products — Specifications on the information to be recorded in captured
crustacean distribution chains
H
E
C
TC 238
ISO 17829:2015
B
C
D
Solid biofuels
*
Solid Biofuels — Determination of length and diameter of pellets
A
Solid biofuels — Determination of ash content
ISO 18122:2015
A
Solid biofuels — Determination of the content of volatile matter
ISO 18123:2015
B
TC 292
ISO 22301:2012
Security and resilience
*
Societal security — Business continuity management systems --- Requirements
D
TMBG
IWA 15:2015
Technical Management Board - groups
*
Specification and method for the determination of performance of automated liquid handling systems
H
CASCO
ISO/IEC 170501:2004
Committee on conformity assessment
*
Conformity assessment — Supplier's declaration of conformity — Part 1: General requirements
A
JTC 1
Information technology
ISO/IEC
25024:2015
*
ISO/IEC TR
29110-3-1:2015
*
Systems and software engineering — Systems and software Quality Requirements and Evaluation
(SQuaRE) — Measurement of data quality
F
Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 3-1: Assessment guide
F
ISO/IEC TR
29110-3-4:2015
*
ISO/IEC TR
18781:2015
*
ISO/IEC TS
18661-3:2015
*
ISO/IEC TS
18661-4:2015
*
ISO/IEC 197763:2015
*
ISO/IEC TR
11801-9903:2015
*
ISO/IEC
30129:2015
*
ISO/IEC 1449622:2015
*
ISO/IEC 154445:2015
*
ISO/IEC 230083:2015
*
ISO/IEC TR
23009-3:2015
*
ISO/IEC 1800063:2015
*
ISO/IEC 2477062:2015
*
ISO/IEC 2916714:2015
*
ISO/IEC 197637:2015
*
ISO/IEC 197638:2015
*
ISO/IEC TR
19763-9:2015
*
ISO/IEC 197577:2009/Cor 1:2015
*
Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 3-4: Autonomy-based improvement method
D
Identification cards — Laundry testing of ID Cards
A
Information Technology — Programming languages, their environments, and system software interfaces — Floating-point extensions for C — Part 3: Interchange and extended types
G
Information Technology — Programming languages, their environments, and system software interfaces — Floating-point extensions for C — Part 4: Supplementary functions
E
Information technology — Computer graphics, image processing and environmental data representation
— Extensible 3D (X3D) encodings — Part 3: Compressed binary encoding
A
Information technology — Generic cabling systems for customer premises — Part 9903: Matrix modelling of channels and links
D
Information technology — Telecommunications bonding networks for buildings and other structures
F
Information technology — Coding of audio-visual objects — Part 22: Open Font Format
H
Information technology — JPEG 2000 image coding system: Reference software — Part 5:
C
Information technology — High efficiency coding and media delivery in heterogeneous environments —
Part 3: 3D audio
H
Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 3: Implementation
guidelines
G
Information technology — Radio frequency identification for item management — Part 63: Parameters
for air interface communications at 860 MHz to 960 MHz Type C
H
Information technology — Real-time locating system (RTLS) device performance test methods — Part
62: High rate pulse repetition frequency Ultra Wide Band (UWB) air interface
B
Information technology — Automatic identification and data capture techniques — Part 14: Crypto suite
AES OFB security services for air interface communications
E
Information technology — Metamodel framework for interoperability (MFI) — Part 7: Metamodel for
service model registration
E
Information technology — Metamodel framework for interoperability (MFI)
for role and goal model registration
— Part 8: Metamodel
D
Information technology — Metamodel framework for interoperability (MFI)
mand model selection
— Part 9: On de-
Information technology — Document Schema Definition Languages (DSDL) — Part 7: Character Repertoire Description Language (CREPDL) — Technical Corrigendum 1
C
free
ISO/IEC 213201:2015
*
ISO/IEC TR
13066-4:2015
*
ISO/IEC 197781:2015
*
ISO/IEC 197782:2015
*
ISO/IEC 197783:2015
*
ISO/IEC 197801:2015
*
Information technology — Document Container File — Part 1: Core
B
Information technology — Interoperability with assistive technology (AT) — Part 4: Linux/UNIX graphical
environments accessibility API
D
Information technology — Learning, education and training — Collaborative technology — Collaborative
workplace — Part 1: Collaborative workplace data model
E
Information technology — Learning, education and training — Collaborative technology — Collaborative
workplace — Part 2: Collaborative environment data model
D
Information technology — Learning, education and training — Collaborative technology — Collaborative
workplace — Part 3: Collaborative group data model
C
Information technology — Learning, education and training — Collaborative technology — Collaborative
learning communication — Part 1: Text-based communication
C
Standards confirmed
The following International Standards are confimred for a five year period:
TC 2
Fasteners
ISO 3506-4:2009
ISO 8748:2007
(reconfirmed)
ISO 8750:2007
(reconfirmed)
ISO 8751:2007
(reconfirmed)
ISO 898-7:1992
(reconfirmed)
ISO 7379:1983
(reconfirmed)
ISO 8678:1988
(reconfirmed)
ISO 12474:2010
TC 4
Rolling bearings
ISO 8443:2010
TC 17
Steel
ISO 17054:2010
ISO 18632:2010
TC 20
Aircraft and space vehicles
ISO 23461:2010
TC 22
Road vehicles
ISO 3871:2000
(reconfirmed)
ISO 6120:1995
(reconfirmed)
ISO 7308:1987
(reconfirmed)
ISO 7309:1985
(reconfirmed)
ISO 7628:2010
ISO 7630:1985
(reconfirmed)
ISO 7631:1985
(reconfirmed)
ISO 7632:1985
(reconfirmed)
ISO 7633:1985
(reconfirmed)
ISO 7634:2007
(reconfirmed)
ISO 9815:2010
ISO 11026:2010
ISO 13674-1:2010
ISO 20918:2007
(reconfirmed)
ISO 21994:2007
(reconfirmed)
ISO 4008-1:1980
(reconfirmed)
ISO 4008-2:1983
(reconfirmed)
ISO 4113:2010
ISO 13043:2011
ISO 16185:2000
(reconfirmed)
ISO 6460-1:2007
(reconfirmed)
ISO 6460-3:2007
(reconfirmed)
ISO 7117:2010
ISO 8709:2010
ISO 8710:2010
ISO 11460:2007
(reconfirmed)
ISO 12619-1:2014
TC 23
Tractors and machinery for agriculture and forestry
ISO 11449:1994
(reconfirmed)
ISO 11789:1999
(reconfirmed)
ISO 8082-1:2009
(reconfirmed)
ISO 8082-2:2011
ISO 11512:1995
(reconfirmed)
ISO 13861:2000
(reconfirmed)
ISO 13862:2000
(reconfirmed)
TC 27
Solid mineral fuels
ISO 561:1989
(reconfirmed)
ISO 924:1989
(reconfirmed)
ISO 1213-1:1993
(reconfirmed)
TC 28
Petroleum products and related products of synthetic or biological origin
ISO 2160:1998
(reconfirmed)
ISO 3014:1993
(reconfirmed)
ISO 4263-2:2003
(reconfirmed)
ISO 13737:2004
(reconfirmed)
TC 37
Terminology and other language and content resources
ISO/TS
11669:2012
TC 44
Welding and allied processes
ISO 7289:2010
ISO 9539:2010
ISO 12224-1:1997
(reconfirmed)
ISO 12224-2:1997
(reconfirmed)
TC 58
Gas cylinders
ISO 10298:2010
ISO 11363-1:2010
ISO 11363-2:2010
TC 61
Plastics
ISO 18872:2007
(reconfirmed)
ISO 11359-2:1999
(reconfirmed)
ISO 182-3:1993
(reconfirmed)
ISO 182-4:1993
(reconfirmed)
ISO 7391-1:2006
(reconfirmed)
ISO 7391-2:2006
(reconfirmed)
ISO 14663-1:1999
(reconfirmed)
ISO 14663-2:1999
(reconfirmed)
ISO 7823-3:2007
(reconfirmed)
TC 76
Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical
use
ISO 3826-3:2006
(reconfirmed)
TC 79
Light metals and their alloys
ISO 16220:2005
TC 89
Wood-based panels
ISO 12465:2007
(reconfirmed)
TC 92
Fire safety
ISO 14934-1:2010
TC 96
Cranes
ISO 7752-1:2010
ISO 8566-1:2010
ISO 4306-5:2005
(reconfirmed)
TC 100
Chains and chain sprockets for power transmission and conveyors
ISO 1977:2006
(reconfirmed)
TC 106
Dentistry
ISO 9173-2:2010
ISO 13397-2:2005
(reconfirmed)
TC 111
Round steel link chains, chain slings, components and accessories
ISO 7592:1983
(reconfirmed)
TC 126
Tobacco and tobacco products
ISO 3402:1999
(reconfirmed)
TC 127
Earth-moving machinery
ISO 12508:1994
(reconfirmed)
ISO 13333:1994
(reconfirmed)
TC 131
Fluid power systems
ISO 2943:1998
(reconfirmed)
ISO 10767-2:1999
(reconfirmed)
TC 135
Non-destructive testing
ISO 11699-2:1998
(reconfirmed)
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO 8779:2010
ISO/TS 158747:2003
(reconfirmed)
ISO/TS 158757:2003
(reconfirmed)
ISO/TS 158767:2003
(reconfirmed)
ISO/TS 158777:2009
ISO/TS 210037:2008
(reconfirmed)
ISO 12176-4:2003
(reconfirmed)
ISO 15306:2003
(reconfirmed)
ISO 16135:2006
(reconfirmed)
ISO 16136:2006
(reconfirmed)
ISO 16137:2006
(reconfirmed)
ISO 16138:2006
(reconfirmed)
ISO 16139:2006
(reconfirmed)
ISO 21787:2006
(reconfirmed)
TC 146
Air quality
ISO 30011:2010
TC 147
Water quality
ISO 5961:1994
(reconfirmed)
ISO 6333:1986
(reconfirmed)
ISO 7980:1986
(reconfirmed)
ISO 8165-2:1999
(reconfirmed)
ISO 8245:1999
(reconfirmed)
ISO 9297:1989
(reconfirmed)
ISO 9963-1:1994
(reconfirmed)
ISO 9963-2:1994
(reconfirmed)
ISO 10359-2:1994
(reconfirmed)
ISO 10566:1994
(reconfirmed)
ISO 11083:1994
(reconfirmed)
ISO 14402:1999
(reconfirmed)
ISO 17858:2007
(reconfirmed)
ISO 22032:2006
(reconfirmed)
ISO 27108:2010
ISO 6222:1999
(reconfirmed)
ISO 15553:2006
(reconfirmed)
ISO 16266:2006
(reconfirmed)
ISO 8192:2007
(reconfirmed)
ISO 10710:2010
ISO 10872:2010
ISO 21427-2:2006
(reconfirmed)
TC 150
Implants for surgery
ISO 5834-1:2005
(reconfirmed)
TC 157
Non-systemic contraceptives and STI barrier prophylactics
ISO 23409:2011
TC 158
Analysis of gases
ISO/TS
29041:2008
(reconfirmed)
TC 165
Timber structures
ISO 6891:1983
(reconfirmed)
ISO 9087:1998
(reconfirmed)
ISO 21581:2010
TC 172
Optics and photonics
ISO 9211-2:2010
TC 182
Geotechnics
ISO/TS 178929:2004
TC 184
Automation systems and integration
ISO 15745-5:2007
(reconfirmed)
TC 190
Soil quality
ISO 10381-8:2006
(reconfirmed)
TC 198
Sterilization of health care products
ISO/TS 176652:2009
TC 201
Surface chemical analysis
ISO/TS
15338:2009
(reconfirmed)
TC 204
Intelligent transport systems
ISO 15622:2010
ISO/TS
15624:2001
ISO 17386:2010
ISO 22840:2010
TC 219
Floor coverings
ISO 10580:2010
ISO 24346:2006
(reconfirmed)
Standards withdrawn
Period from 01 October to 31 October 2015
TC 20
Aircraft and space vehicles
ISO/TS
12208:2011
(replaced by ISO 12208:2015)
TC 23
Tractors and machinery for agriculture and forestry
ISO 13460:1998
(replaced by ISO 13460-1:2015)
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 23251:2006
(replaced by )
ISO
23251:2006/Amd
1:2008
(replaced by )
TC 110
Industrial trucks
ISO 5053:1987
(replaced by ISO 5053-1:2015)
TC 199
Safety of machinery
ISO/TR
18569:2004
(replaced by )
TC 204
Intelligent transport systems
ISO 14817:2002
(replaced by ISO 14817-1:2015, ISO 14817-2:2015)
TC 213
Dimensional and geometrical product specifications and verification
ISO/R 1938:1971
(replaced by ISO 1938-1:2015)
ISO/TS 1661030:2009
(replaced by ISO 16610-30:2015)
JTC 1
Information technology
ISO/IEC TR
29110-3:2011
(replaced by ISO/IEC TR 29110-3-1:2015)
Meeting calendar
(update at 01 October 2015)
Meetings called for the month of September are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
November 2015
1-4
Ghent (Belgium)
TC 94/SC 14
Personal safety -- Protective clothing and equipment/Fire-fighters' personal equipment
2
Atlanta (USA)
TC 41/SC 3
Pulleys and belts (including veebelts)/Conveyor belts
2-4
Beijing (China)
PC 295
Audit data collection
2-6
New Jersey
(USA)
JTC 1/SC 7
Information technology/Software and systems engineering
**
2-6
Bern (Switzerland)
TC 215
Health informatics
2-6
Beijing (China)
TC 282
Water re-use
2-6
Beijing (China)
TC 282/SC 1
Water re-use/Treated wastewater re-use for Irrigation
2-6
Beijing (China)
TC 282/SC 2
Water re-use/Water re-use in urban areas
2-8
Seoul (Korea,
Republic of)
TC 130
Graphic technology
3
Atlanta (USA)
TC 41/SC 1
Pulleys and belts (including veebelts)/Friction
3
Berlin (Germany)
TC 83
Sports and other recreational facilities and equipment
3-5
Montreal (Canada)
TC 20/SC 9
Aircraft and space vehicles/Air cargo and ground equipment
3-5
Berlin (Germany)
TC 22/SC 39
Road vehicles/Ergonomics
3-6
Accra (Ghana)
TC 285
Clean cookstoves and clean cooking solutions
4
Atlanta (USA)
TC 41/SC 4
Pulleys and belts (including veebelts)/Synchronous belt drives
4
Sydney (Australia)
TC 110/SC 1
Industrial trucks/General terminology
4
Beijing (China)
TC 282/SC 3
Water re-use/Risk and performance evaluation of water re-use systems
5
Atlanta (USA)
TC 41
Pulleys and belts (including veebelts)
5
Sydney (Australia)
TC 110/SC 2
Industrial trucks/Safety of powered industrial trucks
5
Yellow Springs
(USA)
TC 159/SC 3
Ergonomics/Anthropometry and biomechanics
6
Sydney (Australia)
TC 110
Industrial trucks
6
Sydney (Australia)
TC 110/SC 5
Industrial trucks/Sustainability
9-10
Munich (Germany)
TC 163/SC 2
Thermal performance and energy use in the built environment/Calculation methods
9-12
Sevilla (Spain)
TC 189
Ceramic tile
9-12
Rio de Janeiro
(Brazil)
TC 262
Risk management
9-13
London (United
Kingdom)
PC 287
Chain of custody of wood and wood-based products
9-13
Kobe (Japan)
TC 21
Equipment for fire protection and fire fighting
9-13
Apeldoorn
(Netherlands)
TC 22/SC 41
Road vehicles/Specific aspects for gaseous fuels
9-13
Tokyo (Japan)
TC 94/SC 15
Personal safety -- Protective clothing and equipment/Respiratory protective devices
9-13
Sydney (Australia)
TC 275
Sludge recovery, recycling, treatment and disposal
10-13
Balzers (Liechtenstein)
TC 112
Vacuum technology
10-13
Yokohama (Japan)
TC 251
Asset management
11
Vicenza (Italy)
TC 44/SC 13
Welding and allied processes/Brazing materials and processes
11
Nottingham
(United Kingdom)
TC 60
Gears
11-13
Munich (Germany)
TC 44/SC 12
Welding and allied processes/Soldering materials
11-13
Geel (Belgium)
TC 212
Clinical laboratory testing and in vitro diagnostic test systems
12-13
Kuala Lumpur
(Malaysia)
TC 227
Springs
12-13
Galveston (USA)
TC 260
Human resource management
13
Kuala Lumpur
(Malaysia)
TC 123
Plain bearings
16
Cleveland (USA)
PC 252
Natural gas fuelling stations for vehicles
16-17
Brasilia (Brazil)
TC 241
Road traffic safety management systems
16-18
Bergamo (Italy)
TC 147/SC 3
Water quality/Radioactivity measurements
16-19
Amsterdam
(Netherlands)
TC 188
Small craft
16-20
Reston (USA)
TC 98
Bases for design of structures
16-20
Kyoto (Japan)
TC 160
Glass in building
16-20
Seattle (USA)
TC 210
Quality management and corresponding general aspects for medical devices
17-19
Agen (France)
TC 20/SC 10
Aircraft and space vehicles/Aerospace fluid systems and components
18
Stockholm
(Sweden)
TC 10/SC 8
Technical product documentation/Construction documentation
19
Reston (USA)
TC 98/SC 2
Bases for design of structures/Reliability of structures
19
Reston (USA)
TC 98/SC 3
Bases for design of structures/Loads, forces and other actions
20-28
Hong Kong
(Hong Kong,
China)
TC 176
Quality management and quality assurance
23-27
Hong Kong
(Hong Kong,
China)
TC 176/SC 2
Quality management and quality assurance/Quality systems
23-27
Hong Kong
(Hong Kong,
China)
TC 176/SC 3
Quality management and quality assurance/Supporting technologies
23-27
Ardooie (Belgium)
TC 188/SC 1
Small craft/Personal safety equipment
24
Lisbon (Portugal)
TC 87
Cork
24-26
Sydney (Australia)
PC 294
Guidance on unit pricing
25
Virtual (Unknown)
CSC/SPC
Council/Strategy and Policy Committee (CSC/SPC)
26
Madrid (Spain)
TC 94/SC 3
Personal safety -- Protective clothing and equipment/Foot protection
26-27
Vienna (Austria)
TC 228
Tourism and related services
*
27
Virtual (Unknown)
*
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
November-December 2015
30-4
London (United
Kingdom)
TC 121/SC 3
Anaesthetic and respiratory equipment/Lung ventilators and related equipment
30-4
Bali (Indonesia)
TC 292
Security and resilience
December 2015
1-3
Wokingham
(United Kingdom)
TC 121/SC 2
Anaesthetic and respiratory equipment/Airways and related equipment
2-3
London (United
Kingdom)
TC 20/SC 16
Aircraft and space vehicles/Unmanned aircraft systems
3-4
Auburn Hills
(USA)
TC 22/SC 31
Road vehicles/Data communication
3-4
Torrance (USA)
TC 197
Hydrogen technologies
7-11
Dubaï (United
Arab Emirates)
TC 217
Cosmetics
8
Istanbul (Turkey)
TC 180
Solar energy
8-9
Düsseldorf
(Germany)
TC 17/SC 4
Steel/Heat treatable and alloy steels
10
Berlin (Germany)
TC 44/SC 6
Welding and allied processes/Resistance welding and allied mechanical joining
10
Clearwater
(USA)
TC 83/SC 5
Sports and other recreational facilities and equipment/Ice hockey equipment and facilities
10-11
Sydney (Australia)
TC 211
Geographic information/Geomatics
11-12
Stuttgart (Germany)
TC 69/SC 8
Applications of statistical methods/Application of statistical and related methodology for new technology and product development
14-17
Lyon (France)
TC 272
Forensic sciences
15-16
Berlin (Germany)
TC 44/SC 10
Welding and allied processes/Quality management in the field of welding
18
Berlin (Germany)
TC 198
Sterilization of health care products
JTC 1/SC 37
Information technology/Biometrics
**
*
January 2016
10-14
Martigny (Switzerland)
11-15
Casablanca
(Morocco)
*
TC 69/SC 4
Applications of statistical methods/Applications of statistical methods in product and process management
11-15
Vienna (Austria)
*
TC 268
Sustainable development in communities
11-15
Vienna (Austria)
**
TC 268/SC 1
Sustainable development in communities/Smart community infrastructures
20-21
Singapore (Singapore)
TC 67/SC 7
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Offshore structures
22
Berlin (Germany)
TC 76
Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical
use
25-27
London (United
Kingdom)
TC 8/SC 8
Ships and marine technology/Ship design
25-27
Weinheim (Germany)
TC 69/SC 7
Applications of statistical methods/Applications of statistical and related techniques for the implementation of Six Sigma
*
**
25-29
London (United
Kingdom)
TC 107
Metallic and other inorganic coatings
25-29
London (United
Kingdom)
**
TC 107/SC 3
Metallic and other inorganic coatings/Electrodeposited coatings and related finishes
25-29
London (United
Kingdom)
**
TC 107/SC 8
Metallic and other inorganic coatings/Chemical conversion coatings
27
Geneva (Switzerland)
**
COUNCIL
Council
28
Geneva (Switzerland)
*
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
28
London (United
Kingdom)
TC 107/SC 7
Metallic and other inorganic coatings/Corrosion tests
28
West Conshohocken (Philadelphia) (USA)
TC 261
Additive manufacturing
**
February 2016
1-5
Vienna (Austria)
PC 273
Customer contact centres
8-12
Paris (France)
TC 58/SC 4
Gas cylinders/Operational requirements for gas cylinders
15-19
Rome (Italy)
JTC 1/SC 35
Information technology/User interfaces
16-18
Savannah (USA)
TC 23/SC 15
Tractors and machinery for agriculture and forestry/Machinery for forestry
24
Geneva (Switzerland)
*
President's
committee
President's committee
25-26
Geneva (Switzerland)
*
TMB
Technical Management Board
29
Birmingham
(United Kingdom)
TC 257
Evaluation of energy savings
*
Paris (France)
**
TC 34/SC 18
Food products/Cocoa
(USA)
**
TC 213
Dimensional and geometrical product specifications and verification
March 2016
3-4
(Unknown)
**
TC 182/SC 1
Geotechnics/Geotechnical investigation and testing
11-12
London (United
Kingdom)
*
TC 225
Market, opinion and social research
14-18
Kanazawa (Japan)
*
TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
14-18
Sydney (Australia)
TC 108/SC 2
Mechanical vibration, shock and condition monitoring/Measurement and evaluation of mechanical
vibration and shock as applied to machines, vehicles and structures
14-18
Sydney (Australia)
TC 108/SC 5
Mechanical vibration, shock and condition monitoring/Condition monitoring and diagnostics of machine systems
15
Geneva (Switzerland)
*
President's
committee
President's committee
16
Geneva (Switzerland)
*
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
16
Geneva (Switzerland)
*
CSC/SPC
Council/Strategy and Policy Committee (CSC/SPC)
17
Milan (Italy)
TC 221
Geosynthetics
17-18
Geneva (Switzerland)
*
COUNCIL
Council
24
Beauvais
(France)
*
TC 23
Tractors and machinery for agriculture and forestry
April 2016
6
Delft (Netherlands)
TC 219
Floor coverings
11-12
Beijing (China)
TC 117
Fans
11-15
Sydney (Australia)
TC 178
Lifts, escalators and moving walks
11-16
Copenhagen
(Denmark)
TC 108
Mechanical vibration, shock and condition monitoring
11-16
Copenhagen
(Denmark)
*
TC 108/SC 3
Mechanical vibration, shock and condition monitoring/Use and calibration of vibration and shock
measuring instruments
11-16
Copenhagen
(Denmark)
*
TC 108/SC 6
Mechanical vibration, shock and condition monitoring/Vibration and shock generating systems
12-13
(Europe)
**
TC 67/SC 2
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Pipeline transportation systems
18-19
Tampa, Florida
(USA)
**
JTC 1/SC 27
Information technology/IT Security techniques
22-23
ClausthalZellerfeld (Germany)
*
TC 24/SC 4
Particle characterization including sieving/Particle characterization
24-29
Concord, California (USA)
*
TC 204
Intelligent transport systems
25
Frankfurt (Germany)
**
TC 68/SC 4
Financial services/Securities and related financial instruments
25-29
Berlin (Germany)
**
TC 161
Control and protective devices for gas and/or oil burners and appliances
26
Frankfurt (Germany)
*
TC 68/SC 7
Financial services/Core banking
28
Frankfurt (Germany)
*
TC 68
Financial services
Toronto (Canada)
**
JTC 1/SC 38
Information technology/Cloud Computing and Distributed Platforms
**
May 2016
2-6
Amsterdam
(Netherlands)
*
TC 215
Health informatics
5-6
Milan (Italy)
*
TC 67/SC 4
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and production equipment
6-13
Berlin (Germany)
**
TC 10
Technical product documentation
9-11
Paris (France)
*
TC 34/SC 9
Food products/Microbiology
9-13
(Germany)
**
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
9-13
Wellington (New
Zealand)
**
TC 46
Information and documentation
9-13
Wellington (New
Zealand)
*
TC 46/SC 11
Information and documentation/Archives/records management
9-13
(USA)
**
TC 276
Biotechnology
11
(Portugal)
**
TC 87
Cork
12-13
Tokyo (Japan)
**
TC 17/SC 16
Steel/Steels for the reinforcement and prestressing of concrete
16-20
Suzhou (China)
*
JTC 1/SC 40
Information technology/IT Service Management and IT Governance
16-20
Chicago (USA)
**
TC 121
Anaesthetic and respiratory equipment
19-20
Tokyo (Japan)
*
TC 184/SC 5
Automation systems and integration/Interoperability, integration, and architectures for enterprise
systems and automation applications
22-27
Sapporo (Japan)
*
TC 184/SC 4
Automation systems and integration/Industrial data
23-25
Rome (Italy)
*
TC 145
Graphical symbols
23-27
Berlin (Germany)
**
TC 130
Graphic technology
23-28
Ljubljana (Slovenia)
*
TC 37/SC 4
Terminology and other language and content resources/Language resource management
25
Brussels (Belgium)
**
TC 115
Pumps
26-27
(Malaysia)
**
TC 228
Tourism and related services
(Japan)
**
TC 22/SC 39
Road vehicles/Ergonomics
(India)
**
TC 85
Nuclear energy, nuclear technologies, and radiological protection
Atlanta (USA)
**
TC 86
Refrigeration and air-conditioning
(Korea, Republic
of)
**
TC 122
Packaging
(USA)
**
TC 282/SC 3
Water re-use/Risk and performance evaluation of water re-use systems
Mexico City
(Mexico)
**
TC 289
Brand evaluation
*
TC 34/SC 5
Food products/Milk and milk products
May-June 2016
30-3
Copenhagen
(Denmark)
June 2016
4
Geneva (Switzerland)
*
JTC 1/SC 29
Information technology/Coding of audio, picture, multimedia and hypermedia information
6-7
Geneva (Switzerland)
*
TC 172/SC 6
Optics and photonics/Geodetic and surveying instruments
6-8
Paris (France)
*
TC 220
Cryogenic vessels
7-10
Prague (Czech
Republic)
*
TC 156
Corrosion of metals and alloys
13
Geneva (Switzerland)
*
President's
committee
President's committee
14
Virtual (Unknown)
*
CSC/SPC
Council/Strategy and Policy Committee (CSC/SPC)
14-17
Ekaterinburg
(Russian Federation)
**
REMCO
Committee on reference materials
15-16
Geneva (Switzerland)
*
TMB
Technical Management Board
18-20
Munich (Germany)
TC 135
Non-destructive testing
20-21
Berlin (Germany)
21-22
Düsseldorf
(Germany)
22-23
Porto (Portugal)
22-23
24
*
TC 22/SC 32
Road vehicles/Electrical and electronic components and general system aspects
TC 17/SC 10
Steel/Steel for pressure purposes
*
TC 17/SC 17
Steel/Steel wire rod and wire products
Porto (Portugal)
*
TC 269
Railway applications
Porto (Portugal)
*
TC 17/SC 15
Steel/Railway rails, rails fasteners, wheels and wheelsets
Geneva (Switzerland)
*
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
(Germany)
**
JTC 1/SC 36
Information technology/Information technology for learning, education and training
(Europe)
**
TC 22/SC 38
Road vehicles/Motorcycles and mopeds
(Germany)
**
TC 29/SC 10
Small tools/Assembly tools for screws and nuts, pliers and nippers
(Germany)
**
TC 135/SC 9
Non-destructive testing/Acoustic emission testing
(Canada)
**
TC 159/SC 1
Ergonomics/General ergonomics principles
St. Petersburg
(Russian Federation)
**
TC 172/SC 4
Optics and photonics/Telescopic systems
Stockholm
(Sweden)
**
TC 242
Energy Management
Turin (Italy)
**
TC 274
Light and lighting
June-July 2016
25-1
(Denmark)
**
TC 37
Terminology and other language and content resources
27-1
London (United
Kingdom)
*
TC 188
Small craft
27-1
(Unknown)
**
TC 224
Service activities relating to drinking water supply systems and wastewater systems - Quality criteria
of the service and performance indicators
27-1
Hangzhou (China)
**
TC 268
Sustainable development in communities
27-1
Hangzhou (China)
**
TC 268/SC 1
Sustainable development in communities/Smart community infrastructures
**
TC 34/SC 4
Food products/Cereals and pulses
New Delhi (India)
**
TC 34/SC 7
Food products/Spices, culinary herbs and condiments
(China)
**
TC 34/SC 16
Food products/Horizontal methods for molecular biomarker analysis
2nd Quarter 2016
(Germany)
1st Semester 2016
August 2016
19
Berlin (Germany)
**
TC 206
Fine ceramics
22-26
Beijing (China)
*
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data representation
25
Virtual (Unknown)
*
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
(USA)
**
TC 91
Surface active agents
September 2016
5-9
Bilbao (Spain)
*
TC 108/SC 4
Mechanical vibration, shock and condition monitoring/Human exposure to mechanical vibration and
shock
5-10
Sydney (Australia)
*
TC 147
Water quality
11-17
San José, California (USA)
*
TC 130
Graphic technology
18
Beijing (China)
*
President's
committee
President's committee
19
Beijing (China)
*
COUNCIL
Council
19-25
Melbourne (Australia)
*
TC 165
Timber structures
20
Beijing (China)
*
DEVCO
Committee on developing country matters
20
Beijing (China)
*
TMB
Technical Management Board
21-23
Beijing (China)
*
GA
General Assembly
21-23
Beijing (China)
**
TC 17/SC 1
Steel/Methods of determination of chemical composition
22
Beijing (China)
*
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
26-30
Seoul (Korea,
Republic of)
**
JTC 1/SC 34
Information technology/Document description and processing languages
26-30
Berlin (Germany)
**
TC 163
Thermal performance and energy use in the built environment
26-30
Berlin (Germany)
**
TC 205
Building environment design
26-30
(Canada)
**
TC 218
Timber
28-29
Delft (Netherlands)
*
TC 28/SC 2
Petroleum products and related products of synthetic or biological origin/Measurement of petroleum
and related products
29-30
(France)
**
TC 17
Steel
Vienna (Austria)
**
JTC 1/SC 22
Information technology/Programming languages, their environments and system software interfaces
Berlin (Germany)
**
TC 61
Plastics
Sao Paulo (Brazil)
**
TC 173
Assistive products for persons with disability
Sao Paulo (Brazil)
**
TC 209
Cleanrooms and associated controlled environments
Shanghai (China)
**
TC 213
Dimensional and geometrical product specifications and verification
Beijing (China)
**
TC 256
Pigments, dyestuffs and extenders
October 2016
2-7
Auckland (New
Zealand)
*
TC 204
Intelligent transport systems
5-7
Madrid (Spain)
*
TC 225
Market, opinion and social research
6
Virtual (Unknown)
*
President's
committee
President's committee
6-7
Berlin (Germany)
**
TC 119
Powder metallurgy
10-14
Hoffman Estates,
Illinois (USA)
*
TC 58/SC 2
Gas cylinders/Cylinder fittings
16-21
(Malaysia)
**
TC 45
Rubber and rubber products
17-21
Berlin (Germany)
**
JTC 1/SC 38
Information technology/Cloud Computing and Distributed Platforms
17-21
(China)
**
TC 5/SC 2
Ferrous metal pipes and metallic fittings/Cast iron pipes, fittings and their joints
17-21
Moscow (Russian Federation)
*
TC 20
Aircraft and space vehicles
17-21
Kyoto (Japan)
*
TC 138
Plastics pipes, fittings and valves for the transport of fluids
20-21
London (United
Kingdom)
*
TC 58
Gas cylinders
24-28
Sydney (Australia)
*
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
26-27
Osaka (Japan)
*
TC 126
Tobacco and tobacco products
Berlin (Germany)
**
TC 59
Buildings and civil engineering works
Berlin (Germany)
**
TC 59/SC 17
Buildings and civil engineering works/Sustainability in buildings and civil engineering works
Burlington, Vermont (USA)
**
TC 146
Air quality
Tokyo (Japan)
**
TC 153
Valves
(Korea, Republic
of)
**
TC 201
Surface chemical analysis
Tel Aviv (Israel)
**
TC 282
Water re-use
Tel Aviv (Israel)
**
TC 282/SC 3
Water re-use/Risk and performance evaluation of water re-use systems
*
TC 23/SC 6
Tractors and machinery for agriculture and forestry/Equipment for crop protection
October-November 2016
31-4
Seoul (Korea,
Republic of)
November 2016
1-4
Troy (USA)
**
TC 22/SC 36
Road vehicles/Safety aspects and impact testing
7-8
Seoul (Korea,
Republic of)
*
TC 159/SC 4
Ergonomics/Ergonomics of human-system interaction
7-12
Lillehammer
(Norway)
**
JTC 1
Information technology
8-10
Kobe (Japan)
*
TC 212
Clinical laboratory testing and in vitro diagnostic test systems
Christchurch
(New Zealand)
**
TC 20/SC 1
Aircraft and space vehicles/Aerospace electrical requirements
(Unknown)
**
TC 215
Health informatics
Delft (Netherlands)
**
TC 28
Petroleum products and related products of synthetic or biological origin
Delft (Netherlands)
**
TC 28/SC 5
Petroleum products and related products of synthetic or biological origin/Measurement of refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels
Delft (Netherlands)
**
TC 28/SC 7
Petroleum products and related products of synthetic or biological origin/Liquid Biofuels
(India)
**
TC 113
Hydrometry
(Korea, Republic
of)
**
JTC 1/SC 23
Information technology/Digitally Recorded Media for Information Interchange and Storage
Paris (France)
**
TC 34
Food products
4th Quarter 2016
Month unknown 2016
(South Africa)
**
TC 44
Welding and allied processes
(Sweden)
**
TC 102
Iron ore and direct reduced iron
(Japan)
**
TC 183
Copper, lead, zinc and nickel ores and concentrates
Guilin (China)
**
TC 29/SC 8
Small tools/Tools for pressing and moulding
(China)
**
TC 215
Health informatics
Washington, D.C
(USA)
**
TC 4
Rolling bearings
(Sweden)
**
TC 29
Small tools
(Unknown)
**
TC 226
Materials for the production of primary aluminium
(Australia)
**
JTC 1/SC 36
Information technology/Information technology for learning, education and training
(USA)
**
TC 42
Photography
**
TC 31
Tyres, rims and valves
**
JTC 1/SC 34
Information technology/Document description and processing languages
(Unknown)
**
TC 58/SC 2
Gas cylinders/Cylinder fittings
London (United
Kingdom)
**
JTC 1/SC 22
Information technology/Programming languages, their environments and system software interfaces
(Japan)
**
TC 20/SC 1
Aircraft and space vehicles/Aerospace electrical requirements
Vienna (Austria)
**
TC 165
Timber structures
New Delhi (India)
**
TC 178
Lifts, escalators and moving walks
**
TC 289
Brand evaluation
Hawaii (USA)
*
TC 45
Rubber and rubber products
(Korea, Republic
of)
**
TC 215
Health informatics
**
TC 54
Essential oils
(North America)
**
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data representation
Erlangen (Germany)
**
TC 36
Cinematography
April 2017
10
May 2017
June 2017
2nd Quarter 2017
(North America)
July 2017
(Unknown)
September 2017
25-29
3rd Quarter 2017
Vienna (Austria)
October 2017
22-27
November 2017
(India)
Month unknown 2017
(South Africa)
**
TC 46
Information and documentation
(South Africa)
**
TC 46/SC 11
Information and documentation/Archives/records management
(United Kingdom)
**
TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
Seoul (Korea,
Republic of)
**
TC 161
Control and protective devices for gas and/or oil burners and appliances
(USA)
**
TC 198
Sterilization of health care products
Milan (Italy)
**
TC 206
Fine ceramics
**
JTC 1/SC 36
Information technology/Information technology for learning, education and training
**
TC 61
Plastics
**
TC 215
Health informatics
(Europe)
**
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data representation
(China)
**
TC 45
Rubber and rubber products
(USA)
**
TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
Milan (Italy)
**
TC 161
Control and protective devices for gas and/or oil burners and appliances
**
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data representation
**
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data representation
June 2018
(Korea, Republic
of)
September 2018
(Japan)
October 2018
(Malaysia)
Month unknown 2018
Month unknown 2019
(Asia)
Month unknown 2020
(North America)