ISO Update
Supplement to ISOfocus
December 2015
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International
Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been
reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The
DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 November to 30 November 2015
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
PC 287
Chain of custody of wood and wood-based products
ISO/CD 38200
Chain of custody of wood and wood-based products — Requirements
TC 4
Rolling bearings
ISO/CD 492
Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values
TC 12
Quantities and units
ISO/CD 80000-11
Quantities and units — Part 11: Characteristic numbers
TC 24
Particle characterization including sieving
ISO/CD 18747-1
Determination of the particle density by sedimentation methods — Part 1: Zero-velocity interpolation approach
TC 34
Food products
ISO/CD 7305
Milled cereal products — Determination of fat acidity
ISO/CD 2451
Cocoa beans — Specification and quality requirements
TC 35
Paints and varnishes
ISO/CD 11126-1
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blastcleaning abrasives — Part 1: General introduction and classification
ISO/CD 11126-3
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blastcleaning abrasives — Part 3: Copper refinery slag
ISO/CD 11126-4
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-
cleaning abrasives — Part 4: Coal furnace slag
ISO/CD 11126-5
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blastcleaning abrasives — Part 5: Nickel refinery slag
ISO/CD 11126-6
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blastcleaning abrasives — Part 6: Iron furnace slag
ISO/CD 11126-7
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blastcleaning abrasives — Part 7: Fused aluminium oxide
TC 45
Rubber and rubber products
ISO/CD 8307
Flexible cellular polymeric materials — Determination of resilience by ball rebound
ISO/CD 22762-1
Elastomeric seismic-protection isolators — Part 1: Test methods
ISO/CD 22762-2
Elastomeric seismic-protection isolators — Part 2: Applications for bridges — Specifications
ISO/CD 22762-3
Elastomeric seismic-protection isolators — Part 3: Applications for buildings — Specifications
TC 70
Internal combustion engines
ISO/CD 8178-1
Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
ISO/CD 8178-4
Reciprocating internal combustion engines — Exhaust emission measurement — Part 4: Steady-state test cycles for
different engine applications
TC 71
Concrete, reinforced concrete and pre-stressed concrete
ISO/CD 13315-8
Environmental management for concrete and concrete structures — Part 8: Environmental labels and declarations of
concrete
TC 92
Fire safety
ISO/CD 13943
Fire safety — Vocabulary
TC 94
Personal safety -- Protective clothing and equipment
ISO/CD 15384
Protective clothing for firefighters — Laboratory test methods and performance requirements for wildland firefighting
clothing
TC 105
Steel wire ropes
ISO/CD 3108
Steel wire ropes for general purposes — Determination of actual breaking load
TC 107
Metallic and other inorganic coatings
ISO/CD 20274
Vitreous and porcelain enamels — Preparation of enamelled samples and determination of thermal expansion coefficient
TC 108
Mechanical vibration, shock and condition monitoring
ISO/CD 13373-7
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 7: Diagnostic techniques for
machine sets in hydraulic power generation and pump-storage plants
ISO/CD 20816-5
Mechanical vibration — Measurement and evaluation of machine vibration — Part 5: Machine sets in hydraulic power
generating and pump-storage plants
TC 122
Packaging
ISO/CD 20848-3
Packaging — Plastics drums — Part 3: Plug/bung closure systems for plastics drums with a nominal capacity of 113,6 l
to 220 l
TC 126
Tobacco and tobacco products
ISO/CD 13276
Tobacco and tobacco products — Determination of nicotine purity — Gravimetric method using tungstosilicic acid
TC 127
Earth-moving machinery
ISO 7131:2009/CD
Amd 1
Earth-moving machinery — Loaders — Terminology and commercial specifications — Amendment 1
TC 134
Fertilizers and soil conditioners
ISO/CD 7409
Fertilizers — Marking — Presentation and declarations
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO/CD 11295
Classification and information on design and applications of plastics piping systems used for renovation and replacement
TC 145
Graphical symbols
ISO 7010:2011/CD
Amd 188
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 188: Safety sign E021:
Protection shelter
ISO 7010:2011/CD
Amd 189
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 189: Safety sign P044:
Use of smart glasses prohibited
TC 147
Water quality
ISO/CD 20595
Water quality — Determination of selected easily volatile organic compounds in water — Method using gas chromatography and mass spectrometry by static headspace technique (HS-GC-MS)
TC 163
Thermal performance and energy use in the built environment
ISO/CD 20310
Thermal insulation — Aluminium silicate wool products — Specification
TC 165
Timber structures
ISO/CD 12122-6
Timber structures — Determination of characteristic valu — Part 6: Large components and assemblies
TC 206
Fine ceramics
ISO/CD 19618
Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement method for normal spectral emissivity
using blackbody reference with an FTIR spectrometer
TC 215
Health informatics
ISO/CD 17117-1
Health informatics — Terminological resources — Part 1: Characteristics
TC 229
Nanotechnologies
ISO/DTS 11888
Nanotechnologies — Characterization of multiwall carbon nanotubes — Mesoscopic shape factors
ISO/DTR 18637
Overview of available frameworks for the development of occupational exposure limits and bands for nano-objects and
their aggregates and agglomerates (NOAA)
TC 269
Railway applications
ISO/DTR 21245-1
Railway applications — Generic standards for rail project planning process — Part 1: Stakeholders and their
needs/interests
ISO/DTR 21245-2
Railway applications — Generic standards for rail project planning process — Part 2: Conditions
JTC 1
Information technology
ISO/IEC PDTR
29125
Information technology — Telecommunications cabling requirements for remote powering of terminal equipment
DIS circulated
Period from 01 November to 30 November 2015
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
PC 277
ISO/DIS 20400
Sustainable procurement
*
Sustainable procurement — Guidance
2016-02-13
TC 5
ISO/DIS 9349
Ferrous metal pipes and metallic fittings
*
Preinsulated ductile iron pipeline systems
2016-02-20
(Revision of ISO 9349:2004)
TC 8
ISO/DIS 19697
Ships and marine technology
*
Ships and marine technology — Navigation and ship operations — Electronic inclinometers
2016-02-20
(Revision of ISO/PAS 19697:2014)
TC 20
ISO/DIS 6858
Aircraft and space vehicles
*
Aircraft — Ground support electrical supplies — General requirements
2016-02-27
(Revision of ISO 6858:1982)
ISO/DIS 20683-1
*
Aircraft ground equipment — Design, test and maintenance for towbarless towing vehicles
(TLTV) interfaced with nose-landing gear — Part 1: Main-line aircraft
2016-02-06
(Revision of ISO 20683-1:2005)
ISO/DIS 20683-2
*
Aircraft ground equipment — Design, test and maintenance for towbarless towing vehicles
(TLTV) interfaced with nose-landing gear — Part 2: Regional aircraft
2016-02-06
(Revision of ISO 20683-2:2004)
ISO/DIS 17666
*
Space systems — Risk management
2016-02-20
(Revision of ISO 17666:2003)
TC 21
ISO/DIS 8201
Equipment for fire protection and fire fighting
*
Acoustics — Audible and other emergency evacuation signals
2016-02-20
(Revision of ISO 8201:1987)
TC 22
ISO/DIS 16845-1
Road vehicles
*
Road vehicles — Controller area network (CAN) conformance test plan — Part 1: Data link
layer and physical signaling
2016-02-20
(Revision of ISO 16845:2004)
TC 24
Particle characterization including sieving
ISO/DIS 22412
Particle size analysis — Dynamic light scattering (DLS)
2016-02-06
(Revision of ISO 13321:1996, ISO 22412:2008)
TC 28
ISO/DIS 19291
Petroleum products and related products of synthetic or biological origin
*
TC 34
ISO 16654:2001/DAmd
1
2016-02-06
Food products
*
TC 35
ISO/DIS 19403-1
Testing of lubricants — Tribological test in the translatory oscillation apparatus — Determination of tribological quantities for oils and greases in the translatory oscillation apparatus
Microbiology of food and animal feeding stuffs — Horizontal method for the detection of
Escherichia coli O157 — Amendment 1: Annex B: Result of interlaboratory studies
2016-02-20
Paints and varnishes
*
Paints and varnishes — Wettability — Part 1: Terminology and general principles
2016-02-13
ISO/DIS 19403-2
ISO/DIS 19403-3
ISO/DIS 19403-4
ISO/DIS 19403-5
ISO/DIS 19403-6
*
*
*
*
*
Paints and varnishes — Wettability — Part 2: Determination of the surface free energy of
solid surfaces by measuring the contact angle
2016-02-13
Paints and varnishes — Wettability — Part 3: Determination of the surface tension of liquids
using the pendant drop method
2016-02-13
Paints and varnishes — Wettability — Part 4: Determination of the polar and dispersive
fractions of the surface tension of liquids from an interfacial tension
2016-02-13
Paints and varnishes — Wettability — Part 5: Determination of the polar and dispersive
fractions of the surface tension of liquids from contact angles measurements on a solid with
only a disperse contribution to its surface energy
2016-02-13
Paints and varnishes — Wettability — Part 6: Measurement of dynamic contact angle
2016-02-13
ISO/DIS 19403-7
ISO/DIS 15741
*
*
Paints and varnishes — Wettability — Part 7: Measurement of the contact angle on a tilt
stage (roll-off angle)
2016-02-13
Paints and varnishes — Friction-reduction coatings for the interior of on- and offshore steel
pipelines for non-corrosive gases
2016-02-20
(Revision of ISO 15741:2001)
TC 46
ISO/DIS 17068
Information and documentation
*
Information and documentation - Trusted third party repository for digital records
2016-02-20
(Revision of ISO/TR 17068:2012)
TC 58
Gas cylinders
ISO 12209:2013/DAmd
1
*
ISO/DIS 19016
*
TC 61
ISO/DIS 17880
Gas cylinders — Outlet connections for gas cylinder valves for compressed breathable air
— Amendment 1: Outlet connection up to a maximum cylinder working pressure of 500 bar
2016-02-06
Gas cylinders — Cylinders and tubes of composite construction — Modal acoustic emission
(MAE) testing for periodic inspection and testing
2016-02-05
Plastics
*
Cellular plastic — Self-supporting metal faced sandwich panels — Complementary element
2016-02-13
TC 69
ISO/DIS 22514-5
ISO 118435:2008/DAmd 1
Applications of statistical methods
*
*
TC 94
ISO/DIS 9151.2
Statistical methods in process management — Capability and performance — Part 5: Process capability estimates and performance for attributive characteristics
2016-02-27
Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases
— Amendment 1
2016-02-06
Personal safety -- Protective clothing and equipment
*
Protective clothing against heat and flame — Determination of heat transmission on exposure to flame
2016-01-20
(Revision of ISO 9151:1995)
ISO/DIS 15025
*
Protective clothing — Protection against flame — Method of test for limited flame spread
2016-02-06
(Revision of ISO 15025:2000)
ISO 20471:2013/DAmd
1
*
2016-02-27
TC 108
Mechanical vibration, shock and condition monitoring
ISO 5344:2004/DAmd
1
*
ISO 8626:1989/DAmd
1
*
ISO 15261:2004/DAmd
1
*
Electrodynamic vibration generating systems — Performance characteristics — Amendment 1
2016-02-06
Servo-hydraulic test equipment for generating vibration — Method of describing characteristics — Amendment 1
2016-02-06
Vibration and shock generating systems — Vocabulary — Amendment 1
2016-02-20
TC 113
ISO/DIS 6420
High visibility clothing — Test methods and requirements — Amendment 1
Hydrometry
*
Hydrometry — Position fixing equipment for hydrometric boats
2016-02-20
(Revision of ISO 6420:1984)
TC 119
ISO/DIS 3928
Powder metallurgy
*
Sintered metal materials, excluding hardmetals — Fatigue test pieces
2016-02-06
(Revision of ISO 3928:1999)
TC 121
ISO/DIS 18562-1
ISO/DIS 18562-2
ISO/DIS 18562-3
ISO/DIS 18562-4
Anaesthetic and respiratory equipment
*
*
*
*
TC 130
ISO/DIS 13655
Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 1:
Evaluation and testing within a risk management process
2016-02-13
Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 2:
Tests for emissions of particulate matter
2016-02-13
Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 3:
Tests for emissions of volatile organic compounds (VOCs)
2016-02-13
Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 4:
Tests for leachables in condensate
2016-02-13
Graphic technology
*
Graphic technology — Spectral measurement and colorimetric computation for graphic arts
images
2016-02-27
(Revision of ISO 13655:2009)
ISO/DIS 17972-3
*
TC 131
ISO/DIS 15552
Graphic technology — Colour data exchange format (CxF/X) — Part 3: Output target data
(CxF/X-3)
2016-02-06
Fluid power systems
*
Pneumatic fluid power — Cylinders with detachable mountings, 1 000 kPa (10 bar) series,
bores from 32 mm to 320 mm — Basic, mounting and accessories dimensions
2016-02-20
(Revision of ISO 15552:2004)
TC 135
ISO/DIS 20484
Non-destructive testing
*
Non-destructive testing — Leak testing - Vocabulary
2016-02-27
ISO/DIS 10880
*
Non-destructive testing — Infrared thermographic testing — General principles
2016-02-20
ISO/DIS 18251-1
*
TC 145
ISO/DIS 3864-2
Non-destructive testing — Infrared thermography — System and equipment — Part 1: Description of characteristics
2016-02-06
Graphical symbols
*
Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels
2016-02-06
(Revision of ISO 3864-2:2004, ISO 3864-2:2004/Amd 1:2011)
ISO 7010:2011/DAmd
182
*
Graphical symbols — Safety colours and safety signs — Registered safety signs —
Amendment 182: Safety sign E025: Emergency hammer
2016-02-06
ISO 7010:2011/DAmd
183
*
ISO 7010:2011/DAmd
184
*
ISO 7010:2011/DAmd
185
*
TC 159
ISO/DIS 9241-11
Graphical symbols — Safety colours and safety signs — Registered safety signs —
Amendment 183: Safety sign P040: Do not set off fireworks
2016-02-06
Graphical symbols — Safety colours and safety signs — Registered safety signs —
Amendment 184: Safety sign P041: No leaning against
2016-02-06
Graphical symbols — Safety colours and safety signs — Registered safety signs —
Amendment 185: Safety sign P042: No pregnant women allowed
2016-02-06
Ergonomics
*
Ergonomics of human-system interaction — Part 11: Usability: Definitions and concepts
2016-02-20
(Revision of ISO 9241-11:1998)
TC 163
ISO/DIS 17772-1
Thermal performance and energy use in the built environment
*
TC 182
ISO/DIS 22476-11
Energy performance of buildings — Indoor environmental Quality — Part 1: Indoor environmental input parameters for the design and assessment of energy performance of buildings
2016-05-04
Geotechnics
*
Geotechnical investigation and testing — Field testing — Part 11: Flat dilatometer test
2016-02-20
(Revision of ISO/TS 22476-11:2005)
TC 190
ISO/DIS 18400-203
Soil quality
*
Soil quality — Sampling — Part 203: Investigation of potentially contaminated sites
2016-02-27
ISO/DIS 18504
*
Soil quality — Guidance on sustainable remediation
2016-02-13
TC 194
ISO/DIS 10993-4
Biological and clinical evaluation of medical devices
*
Biological evaluation of medical devices — Part 4: Selection of tests for interactions with
blood
2016-02-27
(Revision of ISO 10993-4:2002, ISO 10993-4:2002/Amd 1:2006)
ISO/DIS 10993-11
*
Biological evaluation of medical devices — Part 11: Tests for systemic toxicity
2016-02-06
(Revision of ISO 10993-11:2006)
TC 204
ISO/DIS 14823
Intelligent transport systems
*
Intelligent transport systems — Graphic data dictionary
2016-02-06
(Revision of ISO/TS 14823:2008)
TC 206
ISO/DIS 17561
Fine ceramics
*
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for elastic
moduli of monolithic ceramics at room temperature by sonic resonance
2016-02-27
(Revision of ISO 17561:2002, ISO 17561:2002/Cor 1:2007)
ISO/DIS 18071
*
TC 219
ISO/DIS 19322
2016-02-27
Floor coverings
*
TC 238
ISO/DIS 18125
Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) — Determination of
antiviral activity of semiconducting photocatalytic materials under indoor lighting environment — Test method using
bacteriophage Q-beta
Resilient floor coverings — Specification for Floor coverings based on thermoplastic polymers
2016-02-27
Solid biofuels
*
Solid biofuels — Determination of calorific value
2016-02-20
TC 260
ISO/DIS 30409
Human resource management
*
Human resource management — Workforce planning
2016-02-27
TC 261
ISO/ASTM DIS 52901
Additive manufacturing
*
Additive manufacturing — General principles — Requirements for purchased AM parts
2016-02-06
JTC 1
ISO/IEC DIS 30140-1
Information technology
*
Underwater acoustic sensor network — Part 1: Overview and Requirements
2016-02-27
ISO/IEC DIS 29155-4
ISO/IEC DIS 18328-3
*
*
ISO/IEC DIS 187452.2
*
ISO/IEC DIS 24790
*
Systems and software engineering — Information technology project performance benchmarking framework — Part 4: Guidance for data collection and maintenance
2016-02-06
Identification cards — ICC-managed devices — Part 3: Organization, security and commands for interchange
2016-02-20
Test methods for machine readable travel documents (MRTD) and associated readers —
Part 2: Test methods for the contactless interface
2016-01-07
Information technology — Office equipment — Measurement of image quality attributes for
hardcopy output — Monochrome text and graphic images
2016-02-20
(Revision of ISO/IEC TS 24790:2012)
ISO/IEC 1449610:2014/DAmd 2
*
ISO/IEC DIS 14496-15
*
Information technology — Coding of audio-visual objects — Part 10: Advanced Video Coding — Amendment 2: Additional Levels and Supplemental Enhancement Information
2016-02-20
Information technology — Coding of audio-visual objects — Part 15: Carriage of NAL unit
structured video in the ISO Base Media File Format
2016-02-06
(Revision of ISO/IEC 14496-15:2014, ISO/IEC 14496-15:2014/Cor 1:2015)
ISO/IEC DIS 23008-2
*
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 2: High efficiency video coding
(Revision of ISO/IEC 23008-2:2013/DAmd 2, ISO/IEC 23008-2:2015, ISO/IEC 230082:2015/Amd 1:2015)
2016-02-20
ISO/IEC 230085:2015/DAmd 3
*
ISO/IEC 230085:2015/DAmd 4
*
ISO/IEC 230088:2015/DAmd 2
*
ISO/IEC 230088:2015/DAmd 3
*
ISO/IEC 230091:2014/DAmd 3
*
ISO/IEC 197883:2011/DAmd 1
*
ISO/IEC DIS 2382-37
*
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 5: Reference software for high efficiency video coding — Amendment 3:
Reference software for scalable profiles
2016-02-06
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 5: Reference software for high efficiency video coding — Amendment 4:
Reference software for 3D Main profile
2016-02-06
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 8: Conformance Specification for HEVC — Amendment 2: Improved
HEVC Version 1 and Format Range Extensions Profiles Conformance Testing
2016-02-20
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 8: Conformance Specification for HEVC — Amendment 3: Conformance
Testing for Scalable Profiles
2016-02-20
Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 1: Media
presentation description and segment formats — Amendment 3: Authentication, MPD linking, Callback Event, Period Continuity and other Extensions
2016-02-13
Information technology — Learning, education and training — Metadata for learning resources — Part 3: Basic application profile — Amendment 1
2016-02-20
Information technology — Vocabulary — Part 37: Biometrics
2016-02-06
(Revision of ISO/IEC 2382-37:2012)
ISO/IEC DIS 30124
*
Code of practice for the implementation of a biometric system
2016-02-27
FDIS circulated
Period from 01 November to 30 November 2015
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 5
ISO/FDIS 16631
Ferrous metal pipes and metallic fittings
*
TC 6
ISO/FDIS 4046-1
Ductile iron pipes fittings, accessories and their joints compatible with plastic (PVC or PE)
piping sytems, for water applications and for plastic pipeline connections, repair and replacement
2016-01-03
Paper, board and pulps
*
Paper, board, pulps and related terms — Vocabulary — Part 1: Alphabetical index
2016-01-16
ISO/FDIS 4046-2
*
Paper, board, pulps and related terms — Vocabulary — Part 2: Pulping terminology
2016-01-16
ISO/FDIS 4046-3
*
Paper, board, pulps and related terms — Vocabulary — Part 3: Paper-making terminology
2016-01-16
ISO/FDIS 4046-4
ISO/FDIS 4046-5
*
*
TC 17
ISO/FDIS 11949
Paper, board, pulps and related terms — Vocabulary — Part 4: Paper and board grades
and converted products
2016-01-16
Paper, board, pulps and related terms — Vocabulary — Part 5: Properties of pulp, paper
and board
2016-01-16
Steel
*
Cold-reduced tinmill products — Electrolytic tinplate
2016-01-04
(Revision of ISO 11949:1995)
ISO/FDIS 11950
*
Cold-reduced tinmill products — Electrolytic chromium/chromium oxide-coated steel
2016-01-04
(Revision of ISO 11950:1995)
ISO/FDIS 11951
*
Cold-reduced tinmill products — Blackplate
2016-01-04
(Revision of ISO 11951:1995)
ISO/FDIS 5003
*
Vignole railway rails 43 kg/m and above
2016-01-10
(Revision of ISO 5003:1980)
TC 20
ISO/FDIS 3209
Aircraft and space vehicles
*
Aerospace — Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ
threads, classifications: 1 100 MPa (at ambient temperature )/235 degrees C, 1 100 MPa
(at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)/425
degrees C — Dimensions
2016-01-17
(Revision of ISO 3209:1998)
ISO/FDIS 9154
*
Aerospace — Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength
class 1 550 MPa — Procurement specification
2016-01-17
(Revision of ISO 9154:1999)
ISO/FDIS 9609
*
Aerospace — Nuts, hexagonal, plain, reduced height, normal across flats, with MJ
threads, classifications: 450 MPa (at ambient temperature) /120 degrees C, 450 MPa (at
ambient temperature) /235 degrees C, 600 MPa (at ambient temperature) /425 degrees C,
900 MPa (at ambient temperature) /235 degrees C, 900 MPa (at ambient temperature)
/315 degrees C, 900 MPa (at ambient temperature) /650 degrees C, 1 100 MPa (at ambient temperature) /235 degrees C, 1 100 MPa (at ambient temperature) /730 degrees C
and 1 250 MPa (at ambient temperature)/600 degrees C — Dimensions
2016-01-04
(Revision of ISO 9609:1996)
ISO/FDIS 9618
*
Aerospace — Nuts, hexagonal, slotted (castellated), reduced height, normal across flats,
with MJ threads, classifications: 450 MPa (at ambient temperature)/120 degrees C, 450
MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/425
degrees C, 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C, 900 MPa (at ambient temperature)/650 degrees C, 1 100 MPa
(at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/730 de-
2016-01-17
grees C and 1 250 MPa (at ambient temperature)/600 degrees C — Dimensions
(Revision of ISO 9618:1996)
ISO/FDIS 12289
*
Aerospace — Rivets, solid, in corrosion-resisting steel — Procurement specification
(Revision of ISO 12289:2003)
ISO/FDIS 8278
*
Aerospace series — Hydraulic, pressure compensated, variable delivery pumps — General requirements
2016-01-04
(Revision of ISO 12334:2000, ISO 8278:1986)
ISO/FDIS 17546
ISO
27875:2010/FDAm
d1
*
*
TC 22
ISO/FDIS 6624-2
Space systems — Lithium ion battery for space vehicles — Design and verification requirements
2016-01-17
Space systems — Re-entry risk management for unmanned spacecraft and launch vehicle orbital stages — Amendment 1
Road vehicles
*
Internal combustion engines — Piston rings — Part 2: Half keystone rings made of cast
iron
2016-01-04
(Revision of ISO 6624-2:2003)
ISO/FDIS 6624-4
*
Internal combustion engines — Piston rings — Part 4: Half keystone rings made of steel
2016-01-04
(Revision of ISO 6624-4:2003)
ISO/FDIS 3917
*
Road vehicles — Safety glazing materials — Test methods for resistance to radiation,
high temperature, humidity, fire and simulated weathering
2016-01-04
(Revision of ISO 3917:1999)
IEC/FDIS 62752
*
TC 23
ISO/FDIS 11001-1
In-Cable Control and Protection Device for mode 2 charging of electric road vehicles (ICCPD)
2016-01-09
Tractors and machinery for agriculture and forestry
*
Agricultural wheeled tractors — Three-point hitch couplers — Part 1: U-frame coupler
2016-01-18
(Revision of ISO 11001-1:1993)
TC 24
ISO/FDIS 15901-1
Particle characterization including sieving
*
Evaluation of pore size distribution and porosity of solid materials by mercury porosimetry
and gas adsorption — Part 1: Mercury porosimetry
2016-01-04
(Revision of ISO 15901-1:2005, ISO 15901-1:2005/Cor 1:2007)
TC 28
ISO/FDIS 22854
Petroleum products and related products of synthetic or biological origin
*
Liquid petroleum products — Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel — Multidimensional gas
chromatography method
(Revision of ISO 22854:2014)
TC 29
Small tools
2016-01-20
ISO/FDIS 10889-2
*
Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special
designs
(Revision of ISO 10889-2:2004)
ISO/FDIS 10889-3
*
Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat
(Revision of ISO 10889-3:2004)
ISO/FDIS 10889-4
*
Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat
(Revision of ISO 10889-4:2004)
ISO/FDIS 10889-5
*
Tool holders with cylindrical shank — Part 5: Type D with more than one rectangular seat
(Revision of ISO 10889-5:1997)
ISO/FDIS 10889-6
*
Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat
(Revision of ISO 10889-6:2004)
ISO/FDIS 10889-7
*
Tool holders with cylindrical shank — Part 7: Type F with taper seat
(Revision of ISO 10889-7:2004)
TC 34
ISO/FDIS 7304-1
Food products
*
Durum wheat semolina and alimentary pasta — Assessment of cooking quality of alimentary pasta by sensory analysis — Part 1: Reference method
2016-01-11
(Revision of ISO 7304:1985)
ISO/FDIS 6579-1
*
Microbiology of the food chain — Horizontal method for the detection, enumeration and
serotyping of Salmonella — Part 1: Horizontal method for the detection of Salmonella spp.
2016-01-13
(Revision of ISO 6579:2002, ISO 6579:2002/Cor 1:2004, ISO 6579:2002/Amd 1:2007)
ISO/FDIS 6886
*
Animal and vegetable fats and oils — Determination of oxidative stability (accelerated
oxidation test)
2016-01-13
(Revision of ISO 6886:2006)
TC 35
ISO/FDIS 4624
Paints and varnishes
*
Paints and varnishes — Pull-off test for adhesion
2016-01-20
(Revision of ISO 4624:2002)
ISO/FDIS 7784-1
*
Paints and varnishes — Determination of resistance to abrasion — Part 1: Method with
abrasive-paper covered wheels and rotating test specimen
2016-01-27
(Revision of ISO 7784-1:1997)
ISO/FDIS 7784-2
*
Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with
abrasive rubber wheels and rotating test specimen
2016-01-27
(Revision of ISO 7784-2:1997)
ISO/FDIS 7784-3
*
Paints and varnishes — Determination of resistance to abrasion — Part 3: Method with
abrasive-paper covered wheel and linearly reciprocating test specimen
2016-01-27
(Revision of ISO 7784-3:2000)
TC 44
ISO/FDIS 17916
Welding and allied processes
*
Safety of thermal cutting machines
2016-01-27
TC 58
ISO/FDIS 11119-4
Gas cylinders
*
TC 67
ISO/FDIS 21809-3
Gas cylinders — Refillable composite gas cylinders — Design, construction and testing —
Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with loadsharing welded metallic liners
2016-01-17
Materials, equipment and offshore structures for petroleum, petrochemical
and natural gas industries
*
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
2016-01-27
(Revision of ISO 21809-3:2008, ISO 21809-3:2008/Amd 1:2011)
TC 68
ISO/FDIS 9564-4
Financial services
*
Financial services — Personal Identification Number (PIN) management and security —
Part 4: Requirements for PIN handling in eCommerce for Payment Transactions
2016-01-24
(Revision of ISO/TR 9564-4:2004)
TC 69
ISO/FDIS 7870-6
Applications of statistical methods
*
Control charts — Part 6: EWMA control charts
2016-01-10
TC 70
ISO/FDIS 4548-14
Internal combustion engines
*
TC 84
ISO/FDIS 8537
Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 14:
Cold start simulation and hydraulic pulse durability for composite filter housings
2016-01-24
Devices for administration of medicinal products and catheters
*
Sterile single-use syringes, with or without needle, for insulin
2016-01-27
(Revision of ISO 8537:2007)
TC 85
ISO/FDIS 16637
Nuclear energy, nuclear technologies, and radiological protection
*
TC 92
ISO/FDIS 9705-1
Radiological protection — Monitoring and internal dosimetry for staff members exposed to
medical radionuclides as unsealed sources
Fire safety
*
Reaction to fire tests — Room corner test for wall and ceiling lining products — Part 1:
Test method for a small room configuration
(Revision of ISO 9705:1993, ISO 9705:1993/Cor 1:1993)
TC 106
2016-01-17
Dentistry
2016-01-17
ISO/FDIS 3950
*
Dentistry — Designation system for teeth and areas of the oral cavity
2016-01-20
(Revision of ISO 3950:2009)
ISO/FDIS 18739
*
Dentistry — Vocabulary of process chain for CAD/CAM systems
2016-01-20
TC 107
ISO/FDIS 2178
Metallic and other inorganic coatings
*
Non-magnetic coatings on magnetic substrates — Measurement of coating thickness —
Magnetic method
2016-01-27
(Revision of ISO 2178:1982)
ISO/FDIS 18535
*
TC 130
ISO/FDIS 16763
Diamond-like carbon films — Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method
2016-01-24
Graphic technology
*
Graphic technology — Post-press — Requirements for bound products
2016-01-24
TC 134
ISO/FDIS 18643
ISO/FDIS 18644
Fertilizers and soil conditioners
*
*
Fertilizers and soil conditioners — Determination of biuret content of urea-based fertilizers
— HPLC method
2016-01-24
Fertilizers and soil conditioners — Controlled-release fertilizer — General requirements
2016-01-24
ISO/FDIS 18645
*
TC 135
ISO/FDIS 12707
Fertilizers and soil conditioners — Water soluble compound fertilizer — General requirements
2016-01-24
Non-destructive testing
*
Non-destructive testing — Magnetic particle testing — Vocabulary
2016-01-06
TC 147
ISO/FDIS 17943
ISO/FDIS 18635
ISO/FDIS 13165-3
Water quality
*
*
*
TC 172
ISO/FDIS 14490-3
Water quality — Determination of volatile organic compounds in water — Method using
headspace solid-phase micro-extraction (HS-SPME) followed by gas chromatographymass spectrometry (GC-MS)
2016-01-13
Water quality — Determination of short-chain polychlorinated alkanes (SCCPs) in sediment, sewage sludge and suspended (particulate) matter — Method using gas chromatography-mass spectrometry (GC-MS) and electron capture negative ionization (ECNI)
2016-01-20
Water quality — Radium-226 — Part 3: Test method using coprecipitation and gammaspectrometry
Optics and photonics
*
Optics and photonics — Test methods for telescopic systems — Part 3: Test methods for
telescopic sights
(Revision of ISO 14490-3:2004)
TC 173
2016-01-11
Assistive products for persons with disability
2016-01-17
ISO/FDIS 19029
*
TC 183
ISO/FDIS 10378
Accessible design — Auditory guiding signals in public facilities
Copper, lead, zinc and nickel ores and concentrates
*
Copper, lead and zinc sulfide concentrates — Determination of gold and silver — Fire
assay gravimetric and flame atomic absorption spectrometric method
2016-01-24
(Revision of ISO 10378:2005)
TC 188
ISO/FDIS 14895
Small craft
*
Small craft — Liquid-fuelled galley stoves and heating appliances
2016-01-27
(Revision of ISO 14895:2000)
ISO/FDIS 16315
*
Small craft — Electric propulsion system
2016-01-20
TC 190
Soil quality
ISO/FDIS 18400101
*
ISO/FDIS 18400102
*
ISO/FDIS 18400103
*
ISO/FDIS 18400105
*
ISO/FDIS 18400106
*
ISO/FDIS 18400107
*
ISO/FDIS 18400201
*
ISO/FDIS 17183
*
TC 204
Soil quality — Sampling — Part 102: Selection and application of sampling techniques
Soil quality — Sampling — Part 103: Safety
2016-01-17
Soil quality — Sampling — Part 105: Packaging, transport, storage and preservation of
samples
2016-01-17
Soil quality — Sampling — Part 106: Quality control and quality assurance
2016-01-17
Soil quality — Sampling — Part 107: Recording and reporting
2016-01-17
Soil quality — Sampling — Part 201: Physical pretreatment in the field
2016-01-17
Soil quality — Screening soils for isopropanol-extractable organic compounds by determining emulsification index by light attenuation
2016-01-24
Sterilization of health care products
*
TC 201
ISO/FDIS 18554
2016-01-17
2016-01-17
TC 198
ISO/FDIS 15883-7
Soil quality — Sampling — Part 101: Framework for the preparation and application of a
sampling plan
Washer-disinfectors — Part 7: Requirements and tests for washer-disinfectors employing
chemical disinfection for non-invasive, non-critical thermolabile medical devices and
healthcare equipment (ISO/DIS 15883-7:2014)
2016-01-06
Surface chemical analysis
*
Surface chemical analysis — Electron spectroscopies — Proceedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing
analysis by X-Ray photoelectron spectroscopy
Intelligent transport systems
2016-01-24
ISO/FDIS 14296
*
TC 207
ISO/FDIS 14021
Intelligent transport systems — Extension of map database specifications for applications
of cooperative ITS
2016-01-17
Environmental management
*
Environmental labels and declarations — Self-declared environmental claims (Type II
environmental labelling)
2016-01-20
(Revision of ISO 14021:1999, ISO 14021:1999/Amd 1:2011)
TC 210
ISO/FDIS 16142-1
ISO/FDIS 80369-6
Quality management and corresponding general aspects for medical devices
*
*
Medical devices — Recognized essential principles of safety and performance of medical
devices — Part 1: General essential principles and additional specific essential principles
for all non-IVD medical devices and guidance on the selection of standards
Small bore connectors for liquids and gases in healthcare applications — Part 6: Connectors for neuraxial applications
2016-01-17
2016-01-20
(Revision of ISO 594-1:1986, ISO 594-2:1998)
TC 218
ISO/FDIS 8903
Timber
*
Broadleaved sawn timber — Nominal sizes
2016-01-18
(Revision of ISO 8903:1994)
TC 220
ISO/FDIS 24490
Cryogenic vessels
*
Cryogenic vessels — Pumps for cryogenic service
2016-01-13
(Revision of ISO 24490:2005)
TC 238
ISO/FDIS 17827-1
ISO/FDIS 17830
Solid biofuels
*
*
Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part
1: Oscillating screen method using sieves with apertures of 3,15 mm and above
2016-01-20
Solid biofuels — Particle size distribution of disintegrated pellets
2016-01-20
TMBG
Technical Management Board - groups
ISO/FDIS 8007936
Explosive atmospheres — Part 36: Non-electrical equipment for explosive atmospheres —
Basic method and requirements
ISO/FDIS 8007937
Explosive atmospheres — Part 37: Non-electrical equipment for explosive atmospheres —
Non-electrical type of protection constructional safety ''c'', control of ignition sources ''b'',
liquid immersion ''k''
ISO/IEC FDIS
80079-38
Explosive atmospheres — Part 38: Equipment and components in explosive atmospheres
in underground mines
2016-01-17
ISO/IEC FDIS
80079-20-2
Explosive atmospheres — Part 20-2: Material characteristics — Combustible dusts test
methods
2016-01-17
IULTCS
International Union of Leather Technologists and Chemists Societies
ISO/FDIS 19070
*
Leather — Chemical determination of N-methyl-2-pyrrolidone (NMP) in leather
2016-01-17
2016-01-17
2016-01-13
ISO/FDIS 19071
*
JTC 1
ISO/IEC/IEEE
FDIS 24748-4
Leather — Chemical tests — Determination of chromium (VI) and the reductive potential
for chromium tanning agents
2016-01-13
Information technology
*
Systems and software engineering — Life cycle management — Part 4: Systems engineering planning
2016-01-14
(Revision of ISO/IEC 26702:2007)
ISO/IEC FDIS
7816-6
*
Identification cards — Integrated circuit cards — Part 6: Interindustry data elements for
interchange
2016-01-26
(Revision of ISO/IEC 7816-6:2004, ISO/IEC 7816-6:2004/Cor 1:2006)
Information technology — JPEG 2000 image coding system: Core coding system — Part
1:
ISO/IEC FDIS
15444-1
2016-01-17
(Revision of ISO/IEC 15444-1:2004, ISO/IEC 15444-1:2004/Amd 1:2006, ISO/IEC 154441:2004/Cor 1:2007, ISO/IEC 15444-1:2004/Cor 2:2008, ISO/IEC 15444-1:2004/Amd
2:2009, ISO/IEC 15444-1:2004/Amd 4:2013, ISO/IEC 15444-1:2004/Amd 3:2010, ISO/IEC
15444-1:2004/Amd 5:2013, ISO/IEC 15444-1:2004/Amd 6:2013, ISO/IEC 154441:2004/Amd 8:2015, ISO/IEC 15444-1:2004/Cor 3:2015, ISO/IEC 15444-1:2004/Cor
4:2015, ISO/IEC 15444-1:2004/Amd 7:2015)
ISO/IEC FDIS
23008-12
*
ISO/IEC FDIS
30106-1
*
ISO/IEC FDIS
30106-2
*
ISO/IEC FDIS
30106-3
*
Information technology — High efficiency coding and media delivery in heterogeneous
environments — Part 12: Image file format
2016-01-10
Information technology — Object oriented BioAPI — Part 1: Architecture
2016-01-05
Information technology — Object oriented BioAPI — Part 2: Java implementation
2016-01-05
Information technology — Object oriented BioAPI — Part 3: C# implementation
Standards published
New International Standards published between 01 November and 30 November 2015
* Available in English only
** French version of standard previously published in English only
2016-01-05
Price group
REMCO
ISO Guide 31:2015
Committee on reference materials
*
Reference materials — Contents of certificates, labels and accompanying documentation
B
TC 2
Fasteners
ISO 2320:2015
Fasteners — Prevailing torque steel nuts — Functional properties
D
TC 4
Rolling bearings
ISO 104:2015
Rolling bearings — Thrust bearings — Boundary dimensions, general plan
D
Rolling bearings — Radial bearings with locating snap ring — Dimensions, geometrical
product specifications (GPS) and tolerance values
ISO 464:2015
TC 6
C
Paper, board and pulps
ISO/TR
10688:2015
*
ISO 15360-2:2015
*
Paper, board and pulps — Basic terms and equations for optical properties
D
Recycled pulps — Estimation of Stickies and Plastics — Part 2: Image analysis method
C
ISO/TS
20460:2015
*
TC 8
ISO 15371:2015
ISO 484-1:2015
ISO 484-2:2015
C
Ships and marine technology
*
*
*
TC 10
ISO 16792:2015
Paper and board — Automated on-line testing — Metrological comparability between standardized measurements and output of on-line gauges
Ships and marine technology — Fire-extinguishing systems for protection of galley cooking
equipment
E
Shipbuilding — Ship screw propellers — Manufacturing tolerances — Part 1: Propellers of
diameter greater than 2,50 m
C
Shipbuilding — Ship screw propellers — Manufacturing tolerances — Part 2: Propellers of
diameter between 0,80 and 2,50 m inclusive
C
Technical product documentation
*
Technical product documentation — Digital product definition data practices
H
TC 20
ISO 18202:2015
ISO 20618:2015
ISO 22642:2015
Aircraft and space vehicles
*
*
*
Space data and information transfer systems — Mission operations message abstraction
layer
H
Space data and information transfer systems — Spacecraft onboard interface services —
Device enumeration service
F
Space data and information transfer systems — TC synchronization and channel coding
F
ISO 16699:2015
*
Space systems — Disposal of orbital launch stages
A
ISO 17761:2015
ISO 18238:2015
*
*
Space environment (natural and artificial) — Model of high energy radiation at low altitudes
(300 km to 600 km)
A
Space systems — Closed loop problem solving management
C
TC 22
ISO 17536-1:2015
ISO 17449:2015
Road vehicles
*
*
ISO 64601:2007/Amd 1:2015
*
ISO 64603:2007/Amd 1:2015
*
ISO/TR
13062:2015
*
ISO 18580:2015
*
*
ISO
28981:2009/Amd
1:2015
*
ISO 15500-1:2015
*
ISO 15500-8:2015
ISO 15500-10:2015
ISO 15500-11:2015
ISO 15500-12:2015
D
Road vehicles — Safety glazing materials — Test methods for properties of electrically
heated glazing
B
Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption
— Part 1: General test requirements — Amendment 1
XZ
Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption
— Part 3: Fuel consumption measurement at a constant speed — Amendment 1
XZ
Electric mopeds and motorcycles - Terminology and classification
C
ISO/PAS
19695:2015
ISO 15500-7:2015
Road vehicles — Aerosol separator performance test for internal combustion engines —
Part 1: General
Motorcycles — Verification of total running resistance force during mode running on a chassis dynamometer
C
Motorcycles — Functional safety
E
*
*
*
*
*
Mopeds - Methods for setting the running resistance on a chassis dynamometer — Amendment 1
XZ
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 1: General requirements and definitions
B
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 7: Gas
injector
A
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 8: Pressure indicator
A
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 10: Gasflow adjuster
A
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 11:
Gas/air mixer
A
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 12: Pressure relief valve (PRV)
A
ISO 15500-20:2015
*
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 20: Rigid
fuel line in material other than stainless steel
TC 23
Tractors and machinery for agriculture and forestry
ISO 22401:2015
Equipment for crop protection — Method for measurement of potential spray drift from horizontal boom sprayers by the use of a test bench
TC 27
ISO 1953:2015
A
B
Solid mineral fuels
*
Hard coal — Size analysis by sieving
C
TC 28
ISO 4263-3:2015
Petroleum products and related products of synthetic or biological origin
*
TC 29
ISO/TS 13399203:2015
ISO 5611-1:2015
ISO 5611-2:2015
Petroleum and related products — Determination of the ageing behaviour of inhibited oils
and fluids using the TOST test — Part 3: Anhydrous procedure for synthetic hydraulic fluids
D
Small tools
*
Cutting tool data representation and exchange — Part 203: Creation and exchange of 3D
models — Replaceable inserts for drilling
C
Cartridges, type A, for indexable inserts — Part 1: General survey, correlation and determination of dimensions
C
Cartridges, type A, for indexable inserts — Part 2: Style F
A
ISO 5611-3:2015
Cartridges, type A, for indexable inserts — Part 3: Style G
A
ISO 5611-4:2015
Cartridges, type A, for indexable inserts — Part 4: Style J
A
ISO 5611-5:2015
Cartridges, type A, for indexable inserts — Part 5: Style K
A
ISO 5611-6:2015
Cartridges, type A, for indexable inserts — Part 6: Style L
A
ISO 5611-7:2015
Cartridges, type A, for indexable inserts — Part 7: Style R
A
ISO 5611-8:2015
Cartridges, type A, for indexable inserts — Part 8: Style S
B
ISO 5611-9:2015
Cartridges, type A, for indexable inserts — Part 9: Style T
A
ISO 5611-10:2015
Cartridges, type A, for indexable inserts — Part 10: Style U
A
ISO 5611-11:2015
Cartridges, type A, for indexable inserts — Part 11: Style W
A
Cartridges, type A, for indexable inserts — Part 12: Style Y
ISO 5611-12:2015
A
TC 31
Tyres, rims and valves
ISO 5775-2:2015
Bicycle tyres and rims — Part 2: Rims
C
TC 34
Food products
ISO 20633:2015
Infant formula and adult nutritionals — Determination of vitamin E and vitamin A by normal
phase high performance liquid chromatography
D
Infant formula and adult nutritionals — Determination of vitamin B12 by reversed phase high
performance liquid chromatography (RP-HPLC)
C
Infant formula and adult nutritionals — Determination of myo-inositol by liquid chromatography and pulsed amperometry
C
ISO 20634:2015
ISO 20637:2015
Infant formula — Determination of nucleotides by liquid chromatography
ISO 20638:2015
C
ISO 20639:2015
ISO 734:2015
Infant formula and adult nutritionals — Determination of pantothenic acid by ultra high performance liquid chromatography and tandem mass spectrometry method (UHPLC-MS/MS)
B
Oilseed meals — Determination of oil content — Extraction method with hexane (or light
petroleum)
B
Oilseed meals — Determination of oil content — Rapid extraction method
ISO 22630:2015
B
ISO 16958:2015
ISO 20647:2015
ISO 20649:2015
ISO/TR
17622:2015
ISO 4630:2015
Infant formula and adult nutritionals — Determination of total iodine — Inductively coupled
plasma mass spectrometry (ICP-MS)
C
Infant formula and adult nutritionals — Determination of chromium, selenium and molybdenum — Inductively coupled plasma mass spectrometry (ICP-MS)
B
XZ
*
*
Determination of individual and total sterols contents — Gas chromatographic method —
Part 1: Animal and vegetable fats and oils
D
Molecular biomarker analysis — SSR analysis of sunflower
A
TC 35
ISO/TS
19397:2015
F
Animal feeding stuffs — Determination of ash insoluble in hydrochloric acid — Amendment 1
ISO
5985:2002/Amd
1:2015
ISO 12228-1:2014
Milk, milk products, infant formula and adult nutritionals — Determination of fatty acids composition — Capillary gas chromatographic method
Paints and varnishes
*
Determination of the film thickness of coatings using an ultrasonic gage
C
Clear liquids — Estimation of colour by the Gardner colour scale
A
Clear liquids — Estimation of colour by the platinum-cobalt colour scale
ISO 6271:2015
A
ISO 16482-1:2013
ISO 16482-2:2013
Binders for paints and varnishes — Determination of the non-volatile-matter content of
aqueous rosin-resin dispersions — Part 1: Oven method
A
Binders for paints and varnishes — Determination of the non-volatile-matter content of
aqueous rosin-resin dispersions — Part 2: Microwave method
A
TC 38
Textiles
ISO 18074:2015
Textiles — Identification of some animal fibres by DNA analysis method — Cashmere, wool,
yak and their blends
D
Wool — Determination of fibre diameter — Projection microscope method
ISO 137:2015
B
TC 39
Machine tools
ISO 16089:2015
Machine tools — Safety — Stationary grinding machines
H
TC 42
ISO 19262:2015
Photography
*
Photography — Archiving Systems — Vocabulary
F
TC 43
Acoustics
ISO 16283-2:2015
Acoustics — Field measurement of sound insulation in buildings and of building elements —
Part 2: Impact sound insulation
F
TC 44
Welding and allied processes
ISO 636:2015
Welding consumables — Rods, wires and deposits for tungsten inert gas welding of nonalloy and fine-grain steels — Classification
B
Welding consumables — Covered electrodes, wires, rods and tubular cored electrodes for
fusion welding of cast iron — Classification
C
Welding consumables — Tubular cored electrodes for gas shielded and non-gas shielded
metal arc welding of non-alloy and fine grain steels — Classification
E
Welding consumables — Wire electrodes, wires and rods for welding of aluminium and
aluminium alloys — Classification
A
ISO 1071:2015
ISO 17632:2015
ISO 18273:2015
TC 45
ISO 4079:2015
ISO 4642-1:2015
ISO 4642-2:2015
Rubber and rubber products
*
*
*
Rubber hoses and hose assemblies — Textile-reinforced hydraulic types for oil-based or
water-based fluids — Specification
B
Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 1: Semi-rigid
hoses for fixed systems
C
Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 2: Semi-rigid
hoses (and hose assemblies) for pumps and vehicles
ISO 249:2014
*
E
Rubber, raw natural — Determination of dirt content
B
Rubber latex — Determination of density between 5 degrees C and 40 degrees C
ISO 705:2015
A
ISO 6123-2:2015
*
Rubber or plastics covered rollers — Specifications — Part 2: Surface characteristics
B
TC 58
Gas cylinders
ISO 11623:2015
Gas cylinders — Composite construction — Periodic inspection and testing
E
ISO/TR
17329:2015
*
TC 59
ISO 19861:2015
Gas cylinders — Identification of gas cylinder manufacturer marks and their assigned radio
frequency identification (RFID) codes
E
Buildings and civil engineering works
*
Buildings and civil engineering works — Sealants — Determination of curing behaviour
A
ISO 19862:2015
*
Buildings and civil engineering works — Sealants — Durability to extension compression
cycling under accelerated weathering
TC 61
Plastics
ISO 20200:2015
Plastics — Determination of the degree of disintegration of plastic materials under simulated
composting conditions in a laboratory-scale test
ISO 18263-2:2015
*
ISO 19062-1:2015
ISO 19063-1:2015
ISO 19064-1:2015
Plastics — Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP
and PE used for flexible and rigid consumer packaging — Part 2: Preparation of test specimens and determination of properties
B
B
B
Plastics — Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials — Part 1:
Designation system and basis for specifications
B
Plastics — Impact-resistant polystyrene (PS-I) moulding and extrusion materials — Part 1:
Designation system and basis for specifications
B
Plastics — Styrene/acrylonitrile (SAN) moulding and extrusion materials — Part 1: Designation system and basis for specifications
A
ISO
2078:1993/Amd
1:2015
Textile glass — Yarns — Designation — Amendment 1
ISO
15039:2003/Amd
1:2015
Textile-glass rovings — Determination of solubility of size — Amendment 1
TC 69
Applications of statistical methods
XZ
XZ
ISO/TS
17503:2015
*
ISO 18404:2015
*
Statistical methods of uncertainty evaluation — Guidance on evaluation of uncertainty using
two-factor crossed designs
Quantitative methods in process improvement — Six Sigma — Competencies for key per-
D
sonnel and their organizations in relation to Six Sigma and Lean implementation
TC 70
Internal combustion engines
ISO 8178-5:2015
Reciprocating internal combustion engines — Exhaust emission measurement — Part 5:
Test fuels
TC 72
ISO 18600:2015
E
F
Textile machinery and accessories
*
Textile machinery and accessories — Web roller cards — Terms and definitions
B
TC 76
Transfusion, infusion and injection, and blood processing equipment for
medical and pharmaceutical use
ISO 1135-4:2015
Transfusion equipment for medical use — Part 4: Transfusion sets for single use, gravity
feed
C
Transfusion equipment for medical use — Part 5: Transfusion sets for single use with pressure infusion apparatus
D
ISO 1135-5:2015
ISO 11040-1:2015
*
Prefilled syringes — Part 1: Glass cylinders for dental local anaesthetic cartridges
A
TC 83
Sports and other recreational facilities and equipment
ISO 10958-2:2015
Snowboards — Binding mounting area — Part 2: Requirements and test methods for snowboards with inserts
A
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO 15382:2015
Radiological protection — Procedures for monitoring the dose to the lens of the eye, the skin
and the extremities
E
Measurement of radioactivity in the environment — Soil — Part 3: Test method of gammaemitting radionuclides using gamma-ray spectrometry
D
Dosimetry for exposures to cosmic radiation in civilian aircraft — Part 3: Measurements at
aviation altitudes
C
Passive neutron dosimetry systems — Part 1: Performance and test requirements for personal dosimetry
F
ISO 18589-3:2015
ISO 20785-3:2015
ISO 21909-1:2015
*
TC 89
Wood-based panels
ISO 12460-5:2015
Wood-based panels — Determination of formaldehyde release — Part 5: Extraction method
(called the perforator method)
C
TC 92
Fire safety
ISO 16730-1:2015
Fire safety engineering — Procedures and requirements for verification and validation of
calculation methods — Part 1: General
F
Fire safety engineering — Selection of design fire scenarios and design fires — Part 1: Selection of design fire scenarios
E
ISO 16733-1:2015
TC 94
Personal safety -- Protective clothing and equipment
ISO 11999-5:2015
ISO 16900-14:2015
ISO/TS 169761:2015
*
*
*
TC 96
ISO
15442:2012/Amd
1:2015
PPE for firefighters — Test methods and requirements for PPE used by firefighters who are
at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 5: Helmets
D
Respiratory protective devices — Methods of test and test equipment — Part 14: Measurement of sound level
B
Respiratory protective devices — Human factors — Part 1: Metabolic rates and respiratory
flow rates
D
Cranes
*
Cranes — Safety requirements for loader cranes — Amendment 1
XZ
TC 100
Chains and chain sprockets for power transmission and conveyors
ISO 606:2015
Short-pitch transmission precision roller and bush chains, attachments and associated chain
sprockets
E
Leaf chains, clevises and sheaves — Dimensions, measuring forces, tensile strengths and
dynamic strengths
D
ISO 4347:2015
TC 102
ISO 2597-2:2015
Iron ore and direct reduced iron
*
TC 104
ISO 18185-3:2015
Iron ores — Determination of total iron content — Part 2: Titrimetric methods after titanium(III) chloride reduction
C
Freight containers
*
Freight containers — Electronic seals — Part 3: Environmental characteristics
C
TC 106
Dentistry
ISO
13017:2012/Amd
1:2015
Dentistry — Magnetic attachments — Amendment 1
ISO 19429:2015
Dentistry — Designation system for dental implants
XZ
A
TC 107
Metallic and other inorganic coatings
ISO 28721-2:2015
Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 2: Designation and specification of resistance to chemical attack and thermal shock
A
Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings
A
ISO 28721-4:2015
TC 108
Mechanical vibration, shock and condition monitoring
ISO 2017-3:2015
Mechanical vibration and shock — Resilient mounting systems — Part 3: Technical information to be exchanged for application of vibration isolation to new buildings
B
Methods for the calibration of vibration and shock transducers — Part 43: Calibration of
accelerometers by model-based parameter identification
D
ISO 16063-43:2015
ISO
*
Mechanical vibration and shock — Human exposure — Biodynamic coordinate systems —
8727:1997/Amd
1:2015
ISO 13374-4:2015
Amendment 1
*
ISO 13381-1:2015
TC 110
ISO 10896-4:2015
Condition monitoring and diagnostics of machine systems — Data processing, communication and presentation — Part 4: Presentation
A
Condition monitoring and diagnostics of machines — Prognostics — Part 1: General guidelines
D
Industrial trucks
*
Rough-terrain trucks — Safety requirements and verification — Part 4: Additional requirements for variable-reach trucks handling freely suspended loads
TC 111
Round steel link chains, chain slings, components and accessories
ISO
3266:2010/Amd
1:2015
Forged steel eyebolts grade 4 for general lifting purposes — Amendment 1
TC 115
Pumps
ISO/ASME
14414:2015
Pump system energy assessment
TC 121
Anaesthetic and respiratory equipment
IEC 60601-112:2015
XZ
B
XZ
G
*
Medical Electrical Equipment — Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and
medical electrical systems used in the emergency medical services environment
TC 122
Packaging
ISO 780:2015
Packaging — Distribution packaging — Graphical symbols for handling and storage of packages
H
B
Child-resistant packaging — Requirements and testing procedures for reclosable packages
ISO 8317:2015
C
ISO 21067-2:2015
*
Packaging — Vocabulary — Part 2: Packaging and the environment terms
B
TC 127
Earth-moving machinery
ISO
10261:2002/Amd
1:2015
Earth-moving machinery — Product identification numbering system — Amendment 1
TC 136
Furniture
ISO 9221-1:2015
XZ
*
Furniture — Children's high chairs — Part 1: Safety requirements
B
ISO 9221-2:2015
*
Furniture — Children's high chairs — Part 2: Test methods
D
TC 153
Valves
ISO 17292:2015
Metal ball valves for petroleum, petrochemical and allied industries
D
Industrial valves — Isolating valves for low-temperature applications — Part 2: Type testing
ISO 28921-2:2015
C
TC 156
Corrosion of metals and alloys
ISO 18070:2015
Corrosion of metals and alloys — Crevice corrosion formers with disc springs for flat specimens or tubes made from stainless steel
B
Corrosion of metals and alloys — Determination of the critical crevice temperature (CCT) for
stainless steels under potentiostatic control
C
ISO 18089:2015
TC 161
ISO
23550:2011/Amd
1:2015
Control and protective devices for gas and/or oil burners and appliances
*
Safety and control devices for gas burners and gas-burning appliances — General requirements — Amendment 1
TC 163
Thermal performance and energy use in the built environment
ISO 6781-3:2015
Performance of buildings — Detection of heat, air and moisture irregularities in buildings by
infrared methods — Part 3: Qualifications of equipment operators, data analysts and report
writers
TC 164
ISO 11531:2015
XZ
C
Mechanical testing of metals
*
Metallic materials — Sheet and strip — Earing test
A
Metallic materials — Torsion test at ambient temperature
ISO 18338:2015
C
TC 172
ISO 14132-1:2015
ISO 14132-2:2015
ISO/TS
18339:2015
Optics and photonics
*
*
*
Optics and photonics — Vocabulary for telescopic systems — Part 2: Terms for binoculars,
monoculars and spotting scopes
A
Endotherapy devices — Eyepiece cap and light guide connector
Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam
power (energy) density distribution
TC 173
C
Assistive products for persons with disability
*
ISO 10865-2:2015
Wheelchairs — Part 19: Wheeled mobility devices for use as seats in motor vehicles —
Amendment 1: Annex G
Wheelchair containment and occupant retention systems for accessible transport vehicles
designed for use by both sitting and standing passengers — Part 2: Systems for forwardfacing wheelchair-seated passengers
TC 176
ISO 9000:2015
A
A
ISO 13694:2015
ISO 717619:2008/Amd
1:2015
Optics and photonics — Vocabulary for telescopic systems — Part 1: General terms and
alphabetical indexes of terms in ISO 14132
XZ
E
Quality management and quality assurance
*
Quality management systems — Fundamentals and vocabulary
G
ISO 9001:2015
*
Quality management systems — Requirements
E
TC 182
ISO 17892-3:2015
Geotechnics
*
TC 184
ISO 8000-8:2015
Geotechnical investigation and testing — Laboratory testing of soil — Part 3: Determination
of particle density
B
Automation systems and integration
*
Data quality — Part 8: Information and data quality: Concepts and measuring
C
TC 188
Small craft
ISO 9094:2015
Small craft — Fire protection
E
ISO
21487:2012/Amd
2:2015
Small craft — Permanently installed petrol and diesel fuel tanks — Amendment 2
TC 194
Biological and clinical evaluation of medical devices
ISO 22442-1:2015
ISO 22442-2:2015
XZ
*
*
Medical devices utilizing animal tissues and their derivatives — Part 1: Application of risk
management
E
Medical devices utilizing animal tissues and their derivatives — Part 2: Controls on sourcing,
collection and handling
C
TC 199
Safety of machinery
ISO 14120:2015
Safety of machinery — Guards — General requirements for the design and construction of
fixed and movable guards
E
Safety of machinery — Reduction of risks to health resulting from hazardous substances
emitted by machinery — Part 2: Methodology leading to verification procedures
A
ISO/TR
24119:2015
Safety of machinery — Evaluation of fault masking serial connection of interlocking devices
associated with guards with potential free contacts
D
TC 201
Surface chemical analysis
ISO 14123-2:2015
ISO 19830:2015
*
Surface chemical analysis — Electron spectroscopies — Minimum reporting requirements
for peak fitting in X-ray photoelectron spectroscopy
TC 204
Intelligent transport systems
ISO 12813:2015
Electronic fee collection — Compliance check communication for autonomous systems
D
F
Electronic fee collection — Localisation augmentation communication for autonomous systems
ISO 13141:2015
ISO/TS 1563813:2015
*
ISO 15784-2:2015
*
Intelligent transport systems — Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) — Part 13: "Mass" information for jurisdictional
control and enforcement
Intelligent transport systems (ITS) — Data exchange involving roadside modules communication — Part 2: Centre to field device communications using SNMP
E
G
F
ISO/TR 171852:2015
*
ISO 24102-2:2015
*
Intelligent transport systems — Public transport user information — Part 2: Public transport
data and interface standards catalogue and cross references
H
Intelligent transport systems — Communications access for land mobiles (CALM) — ITS
station management — Part 2: Remote management of ITS-SCUs
D
TC 206
Fine ceramics
ISO 14629:2012
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of flowability of ceramic powders
B
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for spherical indentation of porous ceramics
B
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of thickness of ceramic films by contact-probe profilometer
B
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of compressive strength of ceramic granules
B
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of adhesion of ceramic coatings by scratch testing
E
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for compressive behaviour of continuous fibre-reinforced composites at room temperature
D
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of coating thickness by crater-grinding method
C
Fine ceramics (advanced ceramics, advanced technical ceramics) — Rockwell indentation
test for evaluation of adhesion of ceramic coatings
A
ISO 17170:2015
*
ISO 18452:2005
ISO 18591:2015
*
ISO 20502:2005
ISO 20504:2006
ISO 26423:2009
ISO 26443:2008
TC 211
Geographic information/Geomatics
ISO 19109:2015
Geographic information — Rules for application schema
H
TC 215
Health informatics
ISO/HL7
10781:2015
Health Informatics — HL7 Electronic Health Records-System Functional Model, Release 2
(EHR FM)
ISO 17090-2:2015
*
G
Health informatics — Public key infrastructure — Part 2: Certificate profile
E
ISO 21549-5:2015
Health informatics — Patient healthcard data — Part 5: Identification data
B
TC 217
Cosmetics
ISO 18416:2015
Cosmetics — Microbiology — Detection of Candida albicans
C
ISO 21150:2015
Cosmetics — Microbiology — Detection of Escherichia coli
C
Cosmetics — Microbiology — Detection of Pseudomonas aeruginosa
ISO 22717:2015
C
Cosmetics — Microbiology — Detection of Staphylococcus aureus
ISO 22718:2015
C
TC 220
Cryogenic vessels
ISO 21009-2:2015
Cryogenic vessels — Static vacuum insulated vessels
— Part 2: Operational requirements
TC 221
Geosynthetics
ISO 18325:2015
Geosynthetics — Test method for the determination of water discharge capacity for prefabricated vertical drains
TC 226
ISO 19950:2015
ISO 23201:2015
C
B
Materials for the production of primary aluminium
*
*
Aluminium oxide primarily used for the production of aluminium — Determination of alpha
alumina content — Method using X-ray diffraction net peak areas
B
Aluminium oxide primarily used for production of aluminium — Determination of trace elements — Wavelength dispersive X-ray fluorescence spectrometric method
E
TC 229
Nanotechnologies
ISO/TS
18110:2015
Nanotechnologies — Vocabularies for science, technology and innovation indicators
ISO/TS 800041:2015
Nanotechnologies — Vocabulary — Part 1: Core terms
TC 238
Solid biofuels
ISO/TS
16996:2015
Solid biofuels — Determination of elemental composition by X-ray fluorescence
TC 241
Road traffic safety management systems
ISO 39001:2012
Road traffic safety (RTS) management systems - Requirements with guidance for use
A
A
C
F
TC 249
ISO 18665:2015
Traditional chinese medicine
*
Traditional Chinese medicine — Herbal decoction apparatus
B
ISO 18666:2015
*
Traditional Chinese medicine — General requirements of moxibustion devices
B
TC 256
ISO 18451-1:2015
Pigments, dyestuffs and extenders
*
Pigments, dyestuffs and extenders — Terminology — Part 1: General terms
D
ISO 18451-2:2015
*
Pigments, dyestuffs and extenders — Terminology — Part 2: Classification of colouring
materials according to colouristic and chemical aspects
TC 258
Project, programme and portfolio management
ISO 21504:2015
Project, programme and portfolio management — Guidance on portfolio management
C
C
TC 263
ISO 18875:2015
Coalbed methane (CBM)
*
Coalbed methane exploration and development — Terms and definitions
B
IULTCS
International Union of Leather Technologists and Chemists Societies
ISO 3380:2015
Leather — Physical and mechanical tests — Determination of shrinkage temperature up to
100 °C
A
Leather — Physical and mechanical tests — Determination of softness
ISO 17235:2015
A
CASCO
ISO/IEC TS 170215:2014
Committee on conformity assessment
*
JTC 1
Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 5: Competence requirements for auditing and certification of asset
management systems
B
Information technology
ISO/IEC 88241:2015
*
ISO/IEC 88242:2015
*
ISO/IEC 88243:2015
*
ISO/IEC 88244:2015
*
ISO/IEC 88251:2015
*
ISO/IEC 88252:2015
*
ISO/IEC 88253:2015
*
ISO/IEC 88254:2015
*
ISO/IEC 88255:2015
*
ISO/IEC 88256:2015
*
Information technology — Abstract Syntax Notation One (ASN.1): Specification of basic
notation — Part 1:
H
Information technology — Abstract Syntax Notation One (ASN.1): Information object specification — Part 2:
E
Information technology — Abstract Syntax Notation One (ASN.1): Constraint specification —
Part 3:
B
Information technology — Abstract Syntax Notation One (ASN.1): Parameterization of
ASN.1 specifications — Part 4:
C
Information technology — ASN.1 encoding rules: Specification of Basic Encoding Rules
(BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER) — Part
1:
E
Information technology — ASN.1 encoding rules: Specification of Packed Encoding Rules
(PER) — Part 2:
G
Information technology — ASN.1 encoding rules: Specification of Encoding Control Notation
(ECN) — Part 3:
H
Information technology — ASN.1 encoding rules: XML Encoding Rules (XER) — Part 4:
G
Information technology — ASN.1 encoding rules: Mapping W3C XML schema definitions
into ASN.1 — Part 5:
G
Information technology — ASN.1 encoding rules: Registration and application of PER encoding instructions — Part 6:
C
ISO/IEC 88257:2015
*
ISO/IEC 150263:2015
*
ISO/IEC
26550:2015
*
ISO/IEC
26555:2015
*
ISO/IEC 29110-21:2015
*
ISO/IEC TR 291105-6-1:2015
*
ISO/IEC 291553:2015
*
ISO/IEC 178392:2015
*
ISO/IEC 183282:2015
*
ISO/IEC
18584:2015
*
ISO/IEC TS
18508:2015
*
ISO/IEC TS
19217:2015
*
ISO/IEC
30191:2015
*
ISO/IEC 197761:2015
*
ISO/IEC 197762:2015
*
ISO/IEC 180335:2015
*
ISO/IEC
19790:2012
*
ISO/IEC
24759:2014
*
Information technology — ASN.1 encoding rules — Part 7: Specification of Octet Encoding
Rules (OER)
D
Systems and software engineering — Systems and software assurance — Part 3: System
integrity levels
D
Software and systems engineering — Reference model for product line engineering and
management
E
Software and systems engineering — Tools and methods for product line technical management
G
Software Engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 2-1:
Framework and taxonomy
E
Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) —
Part 5-6-1: Systems engineering — Management and engineering guide: Generic profile
group: Entry profile
Systems and software engineering — Information technology project performance benchmarking framework — Part 3: Guidance for reporting
F
C
Information technology — Biometric System-on-Card — Part 2: Physical characteristics
A
Identification cards — ICC-managed devices — Part 2: Physical characteristics and test
methods for cards with devices
C
Information technology — Identification cards — Conformance test requirements for on-card
biometric comparison applications
C
Information technology — Additional Parallel Features in Fortran
G
Information technology — Programming languages — C++ Extensions for concepts
G
Information technology — Digitally recorded media for information interchange and storage
— 120 mm Triple Layer (100,0 Gbytes single sided disk and 200,0 Gbytes double sided
disk) and Quadruple Layer (128,0 Gbytes single sided disk) BD Recordable disk
H
Information technology — Computer graphics, image processing and environmental data
representation — Extensible 3D (X3D) encodings — Part 1: Extensible Markup Language
(XML) encoding
F
Information technology — Computer graphics, image processing and environmental data
representation — Extensible 3D (X3D) encodings — Part 2: Classic VRML encoding
A
Information technology — Security techniques — Encryption algorithms — Part 5: Identitybased ciphers
F
Information technology — Security techniques — Security requirements for cryptographic
modules
G
Information technology — Security techniques — Test requirements for cryptographic modules
H
ISO/IEC
27001:2013/Cor
2:2015
*
ISO/IEC
27002:2013/Cor
2:2015
*
ISO/IEC
27010:2015
*
ISO/IEC
27013:2015
*
ISO/IEC
27017:2015
*
ISO/IEC
24711:2015
*
ISO/IEC 144963:2009/Cor 7:2015
*
ISO/IEC 144964:2004/Amd
43:2015
*
ISO/IEC 144965:2001/Amd
36:2015
*
ISO/IEC 144965:2001/Amd
37:2015
*
ISO/IEC 1449610:2014/Amd
1:2015
*
ISO/IEC 1449611:2015
*
ISO/IEC 1449612:2015
*
ISO/IEC 1449627:2009/Amd
5:2015
*
ISO/IEC 154441:2004/Amd 7:2015
*
ISO/IEC 1544412:2015
*
ISO/IEC 159385:2003/Amd 5:2015
*
ISO/IEC 230034:2015
*
Information technology — Security techniques — Information security management systems
— Requirements — Technical Corrigendum 2
free
Information technology — Security techniques — Code of practice for information security
controls — Technical Corrigendum 2
free
Information technology — Security techniques — Information security management for intersector and inter-organizational communications
E
Information technology — Security techniques — Guidance on the integrated implementation of ISO/IEC 27001 and ISO/IEC 20000-1
F
Information technology — Security techniques — Code of practice for information security
controls based on ISO/IEC 27002 for cloud services
E
Method for the determination of ink cartridge yield for colour inkjet printers and multi-function
devices that contain printer components
E
Information technology — Coding of audio-visual objects — Part 3: Audio — Technical Corrigendum 7
free
Information technology — Coding of audio-visual objects — Part 4: Conformance testing —
Amendment 43: 3D-AVC conformance testing
XZ
Information technology — Coding of audio-visual objects — Part 5: Reference software —
Amendment 36: Pattern-based 3D mesh coding reference software
XZ
Information technology — Coding of audio-visual objects — Part 5: Reference software —
Amendment 37: New levels for the AAC profiles, uniDRC support, AAC block length parameter corrections
XZ
Information technology — Coding of audio-visual objects — Part 10: Advanced Video Coding — Amendment 1: Multi-Resolution frame compatible stereoscopic video with depth
maps, additional supplemental enhancement information and video usability information
XZ
Information technology — Coding of audio-visual objects — Part 11: Scene description and
application engine
H
Information technology — Coding of audio-visual objects — Part 12: ISO base media file
format
H
Information technology — Coding of audio-visual objects — Part 27: 3D Graphics conformance — Amendment 5: Multi-resolution 3D mesh compression
XZ
Information technology — JPEG 2000 image coding system: Core coding system — Part 1:
— Amendment 7: Profiles for an interoperable master format (IMF)
XZ
Information technology — JPEG 2000 image coding system — Part 12: ISO base media file
format
H
Information technology — Multimedia content description interface — Part 5: Multimedia
description schemes — Amendment 5: Quality metadata, multiple text encodings, extended
classification metadata
XZ
Information technology — MPEG audio technologies — Part 4: Dynamic Range Control
H
ISO/IEC TR 2300813:2015
*
ISO/IEC 291995:2012/Amd 1:2015
*
ISO/IEC 180464:2015
*
ISO/IEC 2916716:2015
*
ISO/IEC 1594420:2015
*
ISO/IEC TS 2007121:2015
*
ISO/IEC TR
30109:2015
*
ISO/IEC 197888:2015
*
ISO/IEC 197889:2015
*
ISO/IEC 197942:2011/Amd 2:2015
*
ISO/IEC 197944:2011/Amd 2:2015
*
ISO/IEC 197945:2011/Amd 2:2015
*
ISO/IEC 197945:2005/Cor 4:2015
*
ISO/IEC 197947:2014/Amd 1:2015
*
ISO/IEC TR
24722:2015
*
ISO/IEC 247799:2015
*
ISO/IEC TR
29156:2015
*
ISO/IEC 301081:2015
*
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 13: MMT implementation guidelines
Information technology — JPEG XR image coding system — Part 5: Reference software —
Amendment 1: Extension of the Reference Software: Support for the Boxed Based File Format
G
XZ
Information technology — Radio frequency identification device performance test methods
— Part 4: Test methods for performance of RFID gates in libraries
F
Information technology — Automatic identification and data capture techniques — Part 16:
Crypto suite ECDSA-ECDH security services for air interface communications
E
Information technology — Business Operational View — Part 20: Linking business operational view to functional Linking business operational view to functional service viewservice
view
E
Information technology — User interface component accessibility — Part 21: Guidance on
audio descriptions
D
Information technology — User interfaces — Worldwide availability of personalized computer environments
B
Information technology — Learning, education and training — Metadata for learning resources — Part 8: Data elements for MLR records
E
Information technology — Learning, education and training — Metadata for learning resources — Part 9: Data elements for persons
D
Information technology — Biometric data interchange formats — Part 2: Finger minutiae
data — Amendment 2: XML encoding and clarification of defects
XZ
Information technology — Biometric data interchange formats — Part 4: Finger image data
— Amendment 2: XML encoding and clarification of defects
D
Information technology — Biometric data interchange formats — Part 5: Face image data —
Amendment 2: XML encoding and clarification of defects
G
Information technology — Biometric data interchange formats — Part 5: Face image data —
Technical Corrigendum 4
free
Information technology — Biometric data interchange formats — Part 7: Signature/sign time
series data — Amendment 1: XML encoding
XZ
Information technology — Biometrics — Multimodal and other multibiometric fusion
D
Information technology — Cross-jurisdictional and societal aspects of implementation of
biometric technologies — Pictograms, icons and symbols for use with biometric systems —
Part 9: Vascular applications
Information technology — Guidance for specifying performance requirements to meet security and usability needs in applications using biometrics
A
F
Information technology — Biometric Identity Assurance Services — Part 1: BIAS services
G
ISO/IEC TR
30110:2015
*
ISO/IEC TR 2000010:2015
*
Information technology — Cross jurisdictional and societal aspects of implementation of
biometric technologies — Biometrics and children
Information technology — Service management — Part 10: Concepts and terminology
D
Standards confirmed
The following International Standards are confimred for a five year period:
TC 8
B
Ships and marine technology
ISO 30007:2010
ISO 8729-1:2010
ISO 10596:2009
TC 10
Technical product documentation
ISO 128-22:1999
(reconfirmed)
ISO 5457:1999
(reconfirmed)
ISO 11442:2006
(reconfirmed)
ISO 15226:1999
(reconfirmed)
ISO 128-34:2001
(reconfirmed)
TC 21
Equipment for fire protection and fire fighting
ISO 6182-9:2005
(reconfirmed)
TC 22
Road vehicles
ISO 7030:1987
(reconfirmed)
ISO 8356:1984
(reconfirmed)
ISO 9103:1987
(reconfirmed)
ISO 1726-2:2007
(reconfirmed)
ISO 12357-2:2007
(reconfirmed)
ISO 12619-2:2014
TC 23
Tractors and machinery for agriculture and forestry
ISO 11783-8:2006
(reconfirmed)
ISO 17532:2007
(reconfirmed)
TC 34
Food products
ISO 12871:2010
ISO 12872:2010
ISO 12873:2010
ISO 12966-3:2009
TC 41
Pulleys and belts (including veebelts)
ISO 5292:1995
(reconfirmed)
TC 43
Acoustics
ISO 3382-1:2009
ISO 10534-2:1998
(reconfirmed)
ISO 16032:2004
(reconfirmed)
ISO 18233:2006
(reconfirmed)
TC 45
Rubber and rubber products
ISO 4671:2007
(reconfirmed)
ISO 6801:1983
(reconfirmed)
ISO 6805:1994
(reconfirmed)
ISO 4645:1984
(reconfirmed)
ISO 3582:2000
(reconfirmed)
ISO 6452:2007
(reconfirmed)
ISO 13362:2000
(reconfirmed)
TC 48
Laboratory equipment
ISO 1769:1975
(reconfirmed)
ISO 1770:1981
(reconfirmed)
ISO 6706:1981
(reconfirmed)
ISO 7056:1981
(reconfirmed)
ISO 7712:1983
(reconfirmed)
TC 58
Gas cylinders
ISO 9809-1:2010
ISO 9809-2:2010
ISO 9809-3:2010
ISO 18172-1:2007
(reconfirmed)
ISO 18172-2:2007
(reconfirmed)
TC 60
Gears
ISO 53:1998
(reconfirmed)
ISO 677:1976
(reconfirmed)
ISO 18653:2003
(reconfirmed)
TC 61
Plastics
ISO 2039-2:1987
(reconfirmed)
TC 69
Applications of statistical methods
ISO/TS
21749:2005
(reconfirmed)
TC 83
Sports and other recreational facilities and equipment
ISO 11416:1995
(reconfirmed)
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO 2889:2010
ISO 6980-1:2006
(reconfirmed)
ISO 6980-3:2006
(reconfirmed)
ISO 21482:2007
(reconfirmed)
TC 92
Fire safety
ISO 19703:2010
TC 96
Cranes
ISO 8566-3:2010
TC 98
Bases for design of structures
ISO 2103:1986
(reconfirmed)
ISO 2633:1974
(reconfirmed)
TC 102
Iron ore and direct reduced iron
ISO 11323:2010
TC 107
Metallic and other inorganic coatings
ISO 3892:2000
(reconfirmed)
ISO 11408:1999
(reconfirmed)
TC 121
Anaesthetic and respiratory equipment
IEC 60601-18:2006
TC 131
Fluid power systems
ISO 1179-4:2007
(reconfirmed)
ISO 6149-2:2006
(reconfirmed)
ISO 6149-3:2006
(reconfirmed)
ISO 8434-3:2005
(reconfirmed)
ISO 12151-2:2003
(reconfirmed)
ISO 12151-3:2010
ISO 15171-1:1999
(reconfirmed)
TC 155
Nickel and nickel alloys
ISO 11437-2:1994
(reconfirmed)
TC 159
Ergonomics
ISO 15536-2:2007
(reconfirmed)
ISO/TS 9241411:2012
TC 172
Optics and photonics
ISO 10110-4:1997
(reconfirmed)
ISO 15529:2010
TC 189
Ceramic tile
ISO 10545-7:1996
(reconfirmed)
ISO 1054512:1995
(reconfirmed)
TC 195
Building construction machinery and equipment
ISO 11886:2002
(reconfirmed)
ISO 15642:2003
(reconfirmed)
TC 199
Safety of machinery
ISO 11161:2007
(reconfirmed)
ISO 12100:2010
ISO 13855:2010
TC 213
Dimensional and geometrical product specifications and verification
ISO 286-2:2010
ISO 10360-5:2010
TMBG
Technical Management Board - groups
ISO/IEC Guide 981:2009
ISO/IEC Guide 984:2012
ISO/IEC Guide
99:2007
JTC 1
Information technology
ISO/IEC
29133:2010
Standards withdrawn
Period from 01 November to 30 November 2015
TC 22
Road vehicles
ISO 6550-3:2013
(replaced by )
ISO 6550-4:2014
(replaced by )
ISO/PAS
3930:2009
(replaced by )
TC 29
Small tools
ISO 5611:1995
(replaced by ISO 5611-1:2015, ISO 5611-2:2015, ISO 5611-3:2015, ISO 5611-4:2015, ISO 5611-5:2015, ISO 5611-6:2015,
ISO 5611-7:2015, ISO 5611-8:2015, ISO 5611-9:2015, ISO 5611-10:2015, ISO 5611-11:2015, ISO 5611-12:2015)
TC 34
Food products
ISO 734-1:2006
(replaced by ISO 734:2015)
ISO 734-2:2008
(replaced by ISO 22630:2015)
TC 35
Paints and varnishes
ISO 4630-1:2004
(replaced by ISO 4630:2015)
ISO 4630-2:2004
(replaced by ISO 4630:2015)
ISO 6271-1:2004
(replaced by ISO 6271:2015)
ISO 6271-2:2004
(replaced by ISO 6271:2015)
TC 43
Acoustics
ISO 140-7:1998
(replaced by ISO 16283-1:2014, ISO 16283-2:2015)
ISO 140-14:2004
(replaced by ISO 16283-1:2014, ISO 16283-2:2015)
TC 61
Plastics
ISO 2580-1:2002
(replaced by ISO 19062-1:2015)
ISO 2897-1:1997
(replaced by ISO 19063-1:2015)
ISO 4894-1:1997
(replaced by ISO 19064-1:2015)
TC 77
Products in fibre reinforced cement
ISO 8335:1987
(replaced by )
TC 79
Light metals and their alloys
ISO 3134-1:1985
(replaced by )
ISO 3134-2:1985
(replaced by )
ISO 3134-3:1985
(replaced by )
ISO 3134-4:1985
(replaced by )
ISO 3134-5:1981
(replaced by )
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO 7205:1986
(replaced by )
ISO 21909:2005
(replaced by ISO 21909-1:2015)
TC 115
Pumps
ISO 17613-1:2006
(replaced by )
TC 119
Powder metallurgy
ISO 10076:1991
(replaced by )
TC 155
Nickel and nickel alloys
ISO 11438-1:1993
(replaced by )
ISO 11438-2:1993
(replaced by )
ISO 11438-3:1993
(replaced by )
ISO 11438-4:1993
(replaced by )
ISO 11438-5:1993
(replaced by )
ISO 11438-6:1993
(replaced by )
ISO 11438-7:1993
(replaced by )
ISO 11438-8:1993
(replaced by )
TC 182
Geotechnics
ISO/TS 178923:2004
(replaced by ISO 17892-3:2015)
TC 188
Small craft
ISO 9094-1:2003
(replaced by ISO 9094:2015)
ISO 9094-2:2002
(replaced by ISO 9094:2015)
TC 204
Intelligent transport systems
ISO/TS
12813:2009
(replaced by ISO 12813:2015)
ISO/TS
13141:2010
(replaced by ISO 13141:2015)
ISO 24102:2010
(replaced by ISO 24102-1:2013, ISO 24102-2:2015, ISO 24102-3:2013, ISO 24102-4:2013, ISO 24102-5:2013)
CASCO
Committee on conformity assessment
ISO/IEC TS
17022:2012
(replaced by )
JTC 1
Information technology
ISO/IEC 291102:2011
(replaced by ISO/IEC 29110-2-1:2015)
ISO/IEC ISP
15287-2:2000
(replaced by )
Meeting calendar
(update at 01 November 2015)
Meetings called for the month of October are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
December 2015
7-11
Dubaï (United Arab
Emirates)
TC 217
Cosmetics
8
Istanbul (Turkey)
TC 180
Solar energy
8-9
Düsseldorf (Germany)
TC 17/SC 4
Steel/Heat treatable and alloy steels
10
Berlin (Germany)
TC 44/SC 6
Welding and allied processes/Resistance welding and allied mechanical joining
10
Clearwater (USA)
TC 83/SC 5
Sports and other recreational facilities and equipment/Ice hockey equipment and facilities
10-11
Sydney (Australia)
TC 211
Geographic information/Geomatics
11-12
Stuttgart (Germany)
TC 69/SC 8
Applications of statistical methods/Application of statistical and related methodology for
new technology and product development
14-17
Vienna (Austria)
TC 4
Rolling bearings
14-17
Lyon (France)
TC 272
Forensic sciences
14-18
Milan (Italy)
TC 121/SC 6
Anaesthetic and respiratory equipment/Medical gas systems
15-16
Berlin (Germany)
TC 44/SC 10
Welding and allied processes/Quality management in the field of welding
18
Berlin (Germany)
TC 198
Sterilization of health care products
January 2016
11-15
Padova (Italy)
TC 69/SC 4
Applications of statistical methods/Applications of statistical methods in product and process management
11-15
Vienna (Austria)
TC 268
Sustainable development in communities
11-15
Vienna (Austria)
TC 268/SC 1
Sustainable development in communities/Smart community infrastructures
18-19
Martigny (Switzerland)
JTC 1/SC 37
Information technology/Biometrics
20-21
Singapore (Singapore)
TC 67/SC 7
Materials, equipment and offshore structures for petroleum, petrochemical and natural
gas industries/Offshore structures
22
Berlin (Germany)
TC 76
Transfusion, infusion and injection, and blood processing equipment for medical and
pharmaceutical use
25-27
London (United Kingdom)
TC 8/SC 8
Ships and marine technology/Ship design
25-27
Weinheim (Germany)
TC 69/SC 7
Applications of statistical methods/Applications of statistical and related techniques for the
implementation of Six Sigma
25-29
London (United Kingdom)
TC 107
Metallic and other inorganic coatings
25-29
London (United Kingdom)
TC 107/SC 3
Metallic and other inorganic coatings/Electrodeposited coatings and related finishes
25-29
London (United Kingdom)
TC 107/SC 8
Metallic and other inorganic coatings/Chemical conversion coatings
27
Geneva (Switzerland)
COUNCIL
Council
28
Geneva (Switzerland)
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
28
London (United Kingdom)
TC 107/SC 4
Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)
28
London (United Kingdom)
TC 107/SC 7
Metallic and other inorganic coatings/Corrosion tests
28
West Conshohocken
(Philadelphia) (USA)
TC 261
Additive manufacturing
*
February 2016
1-3
Virtual (Unknown)
TC 44/SC 7
Welding and allied processes/Representation and terms
1-5
Vienna (Austria)
PC 273
Customer contact centres
8-12
Paris (France)
TC 58/SC 4
Gas cylinders/Operational requirements for gas cylinders
15-19
Rome (Italy)
JTC 1/SC 35
Information technology/User interfaces
16-18
Savannah (USA)
TC 23/SC 15
Tractors and machinery for agriculture and forestry/Machinery for forestry
24
Geneva (Switzerland)
President's
committee
President's committee
24-25
Kuala Lumpur (Malaysia)
TC 22
Road vehicles
25-26
Geneva (Switzerland)
TMB
Technical Management Board
February-March 2016
29-4
Xian (China)
JTC 1/SC 6
Information technology/Telecommunications and information exchange between systems
29-3
Birmingham (United
Kingdom)
TC 257
Evaluation of energy savings
March 2016
2-3
Frankfurt (Germany)
TC 297
Waste management, recycling and road operation service
2-4
Zurich (Switzerland)
TC 182
Geotechnics
11-12
London (United Kingdom)
TC 225
Market, opinion and social research
14-18
Paris (France)
TC 34/SC 18
Food products/Cocoa
14-18
Kanazawa (Japan)
TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
14-18
Sydney (Australia)
TC 108/SC 2
Mechanical vibration, shock and condition monitoring/Measurement and evaluation of
mechanical vibration and shock as applied to machines, vehicles and structures
14-18
Sydney (Australia)
TC 108/SC 5
Mechanical vibration, shock and condition monitoring/Condition monitoring and diagnostics of machine systems
15
Geneva (Switzerland)
President's
committee
President's committee
15
Basel (Switzerland)
TC 114/SC 3
Horology/Water-resistant watches
16
Geneva (Switzerland)
*
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
16
Geneva (Switzerland)
*
CSC/SPC
Council/Strategy and Policy Committee (CSC/SPC)
17
Milan (Italy)
TC 221
Geosynthetics
17-18
Geneva (Switzerland)
COUNCIL
Council
TC 117
Fans
TC 85
Nuclear energy, nuclear technologies, and radiological protection
TC 219
Floor coverings
*
*
April 2016
4-5
Beijing (China)
4-8
New Delhi (India)
6
Delft (Netherlands)
7
Delft (Netherlands)
*
TC 23/SC 19
Tractors and machinery for agriculture and forestry/Agricultural electronics
11-15
Sundsvall (Sweden)
*
PC 287
Chain of custody of wood and wood-based products
*
11-15
Sydney (Australia)
11-16
Copenhagen (Denmark)
11-16
Copenhagen (Denmark)
11-16
*
*
TC 178
Lifts, escalators and moving walks
TC 108
Mechanical vibration, shock and condition monitoring
*
TC 108/SC 3
Mechanical vibration, shock and condition monitoring/Use and calibration of vibration and
shock measuring instruments
Copenhagen (Denmark)
*
TC 108/SC 6
Mechanical vibration, shock and condition monitoring/Vibration and shock generating
systems
12-13
(Europe)
*
*
TC 67/SC 2
Materials, equipment and offshore structures for petroleum, petrochemical and natural
gas industries/Pipeline transportation systems
14
Beauvais (France)
*
TC 23
Tractors and machinery for agriculture and forestry
18-19
Tampa, Florida (USA)
JTC 1/SC 27
Information technology/IT Security techniques
22-23
Clausthal-Zellerfeld
(Germany)
TC 24/SC 4
Particle characterization including sieving/Particle characterization
24-29
Concord, California
(USA)
*
TC 204
Intelligent transport systems
25
Frankfurt (Germany)
*
*
TC 68/SC 4
Financial services/Securities and related financial instruments
25-29
Berlin (Germany)
*
*
TC 161
Control and protective devices for gas and/or oil burners and appliances
26
Frankfurt (Germany)
*
TC 68/SC 7
Financial services/Core banking
28
Frankfurt (Germany)
*
TC 68
Financial services
Toronto (Canada)
*
*
JTC 1/SC 38
Information technology/Cloud Computing and Distributed Platforms
May 2016
2-6
Amsterdam (Netherlands)
*
TC 215
Health informatics
5-6
Milan (Italy)
*
TC 67/SC 4
Materials, equipment and offshore structures for petroleum, petrochemical and natural
gas industries/Drilling and production equipment
6-13
Berlin (Germany)
*
*
TC 10
Technical product documentation
9-11
Paris (France)
*
TC 34/SC 9
Food products/Microbiology
9-13
(Germany)
*
*
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
9-13
Wellington (New Zealand)
*
TC 46
Information and documentation
9-13
Wellington (New Zealand)
*
TC 46/SC 11
Information and documentation/Archives/records management
9-13
(USA)
*
*
TC 276
Biotechnology
10
Virtual (Unknown)
*
TC 67/SC 9
Materials, equipment and offshore structures for petroleum, petrochemical and natural
gas industries/Liquefied natural gas installations and equipment
11
(Portugal)
*
*
TC 87
Cork
11
Seoul (Korea, Republic
of)
*
*
TC 122
Packaging
12-13
Tokyo (Japan)
*
TC 17/SC 16
Steel/Steels for the reinforcement and prestressing of concrete
*
16-20
Suzhou (China)
*
JTC 1/SC 40
Information technology/IT Service Management and IT Governance
16-20
Chicago (USA)
*
*
TC 121
Anaesthetic and respiratory equipment
19-20
Tokyo (Japan)
*
TC 184/SC 5
Automation systems and integration/Interoperability, integration, and architectures for
enterprise systems and automation applications
22-27
Sapporo (Japan)
*
TC 184/SC 4
Automation systems and integration/Industrial data
23-25
Rome (Italy)
*
TC 145
Graphical symbols
23-27
Tokyo (Japan)
*
TC 35
Paints and varnishes
23-27
Berlin (Germany)
*
*
TC 130
Graphic technology
23-28
Ljubljana (Slovenia)
*
TC 37/SC 4
Terminology and other language and content resources/Language resource management
25
Brussels (Belgium)
*
*
TC 115
Pumps
26-27
Kuala Lumpur (Malaysia)
*
TC 228
Tourism and related services
(Japan)
*
*
TC 22/SC 39
Road vehicles/Ergonomics
Atlanta (USA)
*
*
TC 86
Refrigeration and air-conditioning
(USA)
*
*
TC 282/SC 3
Water re-use/Risk and performance evaluation of water re-use systems
Mexico City (Mexico)
*
*
TC 289
Brand evaluation
*
TC 34/SC 5
Food products/Milk and milk products
TC 102/SC 2
Iron ore and direct reduced iron/Chemical analysis
May-June 2016
30-3
Copenhagen (Denmark)
31-2
Lulea (Sweden)
June 2016
4
Geneva (Switzerland)
*
JTC 1/SC 29
Information technology/Coding of audio, picture, multimedia and hypermedia information
6-7
Geneva (Switzerland)
*
TC 172/SC 6
Optics and photonics/Geodetic and surveying instruments
6-8
Paris (France)
*
TC 220
Cryogenic vessels
7-10
Prague (Czech Republic)
*
TC 156
Corrosion of metals and alloys
9-16
Portland, Maine (USA)
*
JTC 1/SC 28
Information technology/Office equipment
13
Geneva (Switzerland)
*
President's
committee
President's committee
14
Virtual (Unknown)
*
CSC/SPC
Council/Strategy and Policy Committee (CSC/SPC)
14-17
Ekaterinburg (Russian
Federation)
*
*
REMCO
Committee on reference materials
15-16
Geneva (Switzerland)
*
TMB
Technical Management Board
18-20
Munich (Germany)
TC 135
Non-destructive testing
20-21
Berlin (Germany)
TC 22/SC 32
Road vehicles/Electrical and electronic components and general system aspects
21-22
Düsseldorf (Germany)
TC 17/SC 10
Steel/Steel for pressure purposes
*
22-23
Porto (Portugal)
*
TC 17/SC 17
Steel/Steel wire rod and wire products
22-23
Porto (Portugal)
*
TC 269
Railway applications
24
Porto (Portugal)
*
TC 17/SC 15
Steel/Railway rails, rails fasteners, wheels and wheelsets
30
Geneva (Switzerland)
*
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
(Germany)
*
*
JTC 1/SC 36
Information technology/Information technology for learning, education and training
(Europe)
*
*
TC 22/SC 38
Road vehicles/Motorcycles and mopeds
(Germany)
*
*
TC 29/SC 10
Small tools/Assembly tools for screws and nuts, pliers and nippers
(Germany)
*
*
TC 135/SC 9
Non-destructive testing/Acoustic emission testing
(Canada)
*
*
TC 159/SC 1
Ergonomics/General ergonomics principles
St. Petersburg (Russian Federation)
*
*
TC 172/SC 4
Optics and photonics/Telescopic systems
Stockholm (Sweden)
*
*
TC 242
Energy Management
Turin (Italy)
*
*
TC 274
Light and lighting
June-July 2016
25-1
(Denmark)
*
*
TC 37
Terminology and other language and content resources
27-1
London (United Kingdom)
*
TC 188
Small craft
27-1
(Unknown)
*
*
TC 224
Service activities relating to drinking water supply systems and wastewater systems Quality criteria of the service and performance indicators
27-1
Hangzhou (China)
*
*
TC 268
Sustainable development in communities
27-1
Hangzhou (China)
*
*
TC 268/SC 1
Sustainable development in communities/Smart community infrastructures
*
*
TC 34/SC 4
Food products/Cereals and pulses
New Delhi (India)
*
*
TC 34/SC 7
Food products/Spices, culinary herbs and condiments
(China)
*
*
TC 34/SC 16
Food products/Horizontal methods for molecular biomarker analysis
2nd Quarter 2016
(Germany)
1st Semester 2016
August 2016
19
Berlin (Germany)
*
*
TC 206
Fine ceramics
22-26
Beijing (China)
*
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data
representation
25
Virtual (Unknown)
*
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
(USA)
*
*
TC 91
Surface active agents
September 2016
5-9
Bilbao (Spain)
*
TC 108/SC 4
Mechanical vibration, shock and condition monitoring/Human exposure to mechanical
vibration and shock
5-10
Sydney (Australia)
*
TC 147
Water quality
11-17
San José, California
(USA)
*
TC 130
Graphic technology
18
Beijing (China)
*
President's
committee
President's committee
19
Beijing (China)
*
COUNCIL
Council
19-22
Atlanta (USA)
*
TC 142
Cleaning equipment for air and other gases
19-25
Melbourne (Australia)
*
TC 165
Timber structures
20
Beijing (China)
*
DEVCO
Committee on developing country matters
20
Beijing (China)
*
TMB
Technical Management Board
20-22
Yichang (China)
*
*
TC 256
Pigments, dyestuffs and extenders
20-22
Stockholm (Sweden)
*
*
TC 264
Fireworks
21-23
Beijing (China)
*
GA
General Assembly
21-23
Beijing (China)
*
*
TC 17/SC 1
Steel/Methods of determination of chemical composition
22
Beijing (China)
*
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
26-30
San José, California
(USA)
*
JTC 1/SC 2
Information technology/Coded character sets
26-30
Seoul (Korea, Republic
of)
*
*
JTC 1/SC 34
Information technology/Document description and processing languages
26-30
Burlington, Vermont
(USA)
*
*
TC 146/SC 3
Air quality/Ambient atmospheres
26-30
Burlington, Vermont
(USA)
*
*
TC 146/SC 6
Air quality/Indoor air
26-30
Berlin (Germany)
*
*
TC 163
Thermal performance and energy use in the built environment
26-30
Berlin (Germany)
*
*
TC 205
Building environment design
26-30
(Canada)
*
*
TC 218
Timber
28-29
Delft (Netherlands)
*
TC 28/SC 2
Petroleum products and related products of synthetic or biological origin/Measurement of
petroleum and related products
29-30
(France)
*
*
TC 17
Steel
30
Burlington, Vermont
(USA)
*
*
TC 146/SC 1
Air quality/Stationary source emissions
Vienna (Austria)
*
*
JTC 1/SC 22
Information technology/Programming languages, their environments and system software
interfaces
(Asia)
*
*
TC 31/SC 9
Tyres, rims and valves/Valves for tube and tubeless tyres
Berlin (Germany)
*
*
TC 61
Plastics
Cartagena de Indias
(Colombia)
*
*
TC 71
Concrete, reinforced concrete and pre-stressed concrete
Burlington, Vermont
(USA)
*
*
TC 146/SC 2
Air quality/Workplace atmospheres
Sao Paulo (Brazil)
*
*
TC 173
Assistive products for persons with disability
Sao Paulo (Brazil)
*
*
TC 209
Cleanrooms and associated controlled environments
Shanghai (China)
*
*
TC 213
Dimensional and geometrical product specifications and verification
*
*
TC 92/SC 1
Fire safety/Fire initiation and growth
3rd Quarter 2016
Seoul (Korea, Republic
of)
October 2016
2-7
Auckland (New Zealand)
*
TC 204
Intelligent transport systems
5-6
Paris (France)
*
*
TC 79/SC 2
Light metals and their alloys/Organic and anodic oxidation coatings on aluminium
5-7
Madrid (Spain)
*
TC 225
Market, opinion and social research
6
Virtual (Unknown)
*
President's
committee
President's committee
6
(Unknown)
*
*
TC 67/SC 9
Materials, equipment and offshore structures for petroleum, petrochemical and natural
gas industries/Liquefied natural gas installations and equipment
6-7
Berlin (Germany)
*
*
TC 119
Powder metallurgy
10-14
Hoffman Estates, Illinois (USA)
*
TC 58/SC 2
Gas cylinders/Cylinder fittings
12-13
Hangzhou (China)
*
TC 70/SC 8
Internal combustion engines/Exhaust gas emission measurement
14
Hangzhou (China)
*
TC 70
Internal combustion engines
17-21
Berlin (Germany)
*
*
JTC 1/SC 38
Information technology/Cloud Computing and Distributed Platforms
17-21
(China)
*
*
TC 5/SC 2
Ferrous metal pipes and metallic fittings/Cast iron pipes, fittings and their joints
17-21
Moscow (Russian Federation)
*
TC 20
Aircraft and space vehicles
17-21
London (United Kingdom)
*
TC 58/SC 3
Gas cylinders/Cylinder design
17-21
Sydney (Australia)
*
TC 96/SC 6
Cranes/Mobile cranes
17-21
Kyoto (Japan)
*
TC 138
Plastics pipes, fittings and valves for the transport of fluids
19-21
Philadelphia (USA)
*
*
TC 202
Microbeam analysis
20-21
London (United Kingdom)
*
TC 58
Gas cylinders
20-21
Vienna (Austria)
*
TC 227
Springs
24-28
Tokyo (Japan)
*
*
TC 79
Light metals and their alloys
24-28
Sydney (Australia)
*
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
26-27
Osaka (Japan)
*
TC 126
Tobacco and tobacco products
26-28
(United Kingdom)
*
*
TC 123
Plain bearings
27-28
Orlando (USA)
*
*
TC 17/SC 12
Steel/Continuous mill flat rolled products
Berlin (Germany)
*
*
TC 59
Buildings and civil engineering works
Berlin (Germany)
*
*
TC 59/SC 17
Buildings and civil engineering works/Sustainability in buildings and civil engineering
works
Tokyo (Japan)
*
*
TC 153
Valves
(Japan)
*
*
TC 164
Mechanical testing of metals
(Korea, Republic of)
*
*
TC 201
Surface chemical analysis
Tel Aviv (Israel)
*
*
TC 282
Water re-use
Tel Aviv (Israel)
*
*
TC 282/SC 3
Water re-use/Risk and performance evaluation of water re-use systems
October-November 2016
30-4
Langkawi (Malaysia)
*
*
TC 45
Rubber and rubber products
31-4
Seoul (Korea, Republic
of)
*
TC 23/SC 6
Tractors and machinery for agriculture and forestry/Equipment for crop protection
November 2016
1-4
Troy (USA)
*
*
TC 22/SC 36
Road vehicles/Safety and impact testing
7-8
Seoul (Korea, Republic
of)
*
TC 159/SC 4
Ergonomics/Ergonomics of human-system interaction
7-11
Sydney (Australia)
*
TC 98
Bases for design of structures
7-12
Lillehammer (Norway)
*
*
JTC 1
Information technology
8-10
Kobe (Japan)
*
TC 212
Clinical laboratory testing and in vitro diagnostic test systems
Christchurch (New
Zealand)
*
*
TC 20/SC 1
Aircraft and space vehicles/Aerospace electrical requirements
(China)
*
*
TC 134
Fertilizers and soil conditioners
(Unknown)
*
*
TC 215
Health informatics
Delft (Netherlands)
*
*
TC 28
Petroleum products and related products of synthetic or biological origin
Delft (Netherlands)
*
*
TC 28/SC 5
Petroleum products and related products of synthetic or biological origin/Measurement of
refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels
Delft (Netherlands)
*
*
TC 28/SC 7
Petroleum products and related products of synthetic or biological origin/Liquid Biofuels
(India)
*
*
TC 113
Hydrometry
4th Quarter 2016
2nd Semester 2016
(Europe)
*
*
TC 31/SC 5
Tyres, rims and valves/Agricultural tyres and rims
(Europe)
*
*
TC 31/SC 6
Tyres, rims and valves/Off-the-road tyres and rims
(Europe)
*
*
TC 31/SC 7
Tyres, rims and valves/Industrial tyres and rims
Florence (Italy)
*
*
TC 160
Glass in building
Florence (Italy)
*
*
TC 160/SC 1
Glass in building/Product considerations
Florence (Italy)
*
*
TC 160/SC 2
Glass in building/Use considerations
(Korea, Republic of)
*
*
JTC 1/SC 23
Information technology/Digitally Recorded Media for Information Interchange and Storage
Paris (France)
*
*
TC 34
Food products
(South Africa)
*
*
TC 44
Welding and allied processes
(Sweden)
*
*
TC 102
Iron ore and direct reduced iron
(Japan)
*
*
TC 183
Copper, lead, zinc and nickel ores and concentrates
Month unknown 2016
March 2017
6
Kyoto (Japan)
*
*
TC 60
Gears
16-17
Geneva (Switzerland)
*
*
COUNCIL
Council
Guilin (China)
*
*
TC 29/SC 8
Small tools/Tools for pressing and moulding
(China)
*
*
TC 215
Health informatics
Washington, D.C
(USA)
*
*
TC 4
Rolling bearings
(Sweden)
*
*
TC 29
Small tools
(Unknown)
*
*
TC 226
Materials for the production of primary aluminium
(Australia)
*
*
JTC 1/SC 36
Information technology/Information technology for learning, education and training
(USA)
*
*
TC 42
Photography
April 2017
10
May 2017
June 2017
2nd Quarter 2017
(North America)
*
*
TC 31
Tyres, rims and valves
(North America)
*
*
TC 31/SC 3
Tyres, rims and valves/Passenger car tyres and rims
(North America)
*
*
TC 31/SC 10
Tyres, rims and valves/Cycle, moped, motorcycle tyres and rims
Tsukuba (Japan)
*
*
TC 92
Fire safety
*
*
JTC 1/SC 34
Information technology/Document description and processing languages
Raleigh (USA)
*
TC 38/SC 23
Textiles/Fibres and yarns
Raleigh (USA)
*
*
TC 38
Textiles
July 2017
(Unknown)
August 2017
31
September 2017
18
Berlin (Germany)
*
COUNCIL
Council
20-22
Berlin (Germany)
*
*
GA
General Assembly
25-29
(Unknown)
*
*
TC 58/SC 2
Gas cylinders/Cylinder fittings
(China)
*
*
JTC 1/SC 2
Information technology/Coded character sets
London (United Kingdom)
*
*
JTC 1/SC 22
Information technology/Programming languages, their environments and system software
interfaces
(Japan)
*
*
TC 20/SC 1
Aircraft and space vehicles/Aerospace electrical requirements
Vienna (Austria)
*
*
TC 165
Timber structures
New Delhi (India)
*
*
TC 178
Lifts, escalators and moving walks
(Japan)
*
*
TC 213
Dimensional and geometrical product specifications and verification
*
*
TC 289
Brand evaluation
3rd Quarter 2017
Vienna (Austria)
October 2017
2-7
Vladivostok (Russian
Federation)
*
JTC 1
Information technology
22-27
Hawaii (USA)
*
TC 45
Rubber and rubber products
(Korea, Republic of)
*
*
TC 215
Health informatics
*
*
TC 54
Essential oils
November 2017
(India)
Month unknown 2017
(North America)
*
*
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data
representation
Erlangen (Germany)
*
*
TC 36
Cinematography
(South Africa)
*
*
TC 46
Information and documentation
(South Africa)
*
*
TC 46/SC 11
Information and documentation/Archives/records management
(United Kingdom)
*
*
TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
Seoul (Korea, Republic
of)
*
*
TC 161
Control and protective devices for gas and/or oil burners and appliances
(USA)
*
*
TC 198
Sterilization of health care products
Milan (Italy)
*
*
TC 206
Fine ceramics
*
*
JTC 1/SC 36
Information technology/Information technology for learning, education and training
*
*
TC 61
Plastics
*
*
TC 92
Fire safety
*
*
TC 215
Health informatics
(Europe)
*
*
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data
representation
(China)
*
*
TC 45
Rubber and rubber products
(USA)
*
*
TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
Milan (Italy)
*
*
TC 161
Control and protective devices for gas and/or oil burners and appliances
*
*
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data
representation
*
*
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data
representation
June 2018
(Korea, Republic of)
September 2018
(Japan)
3rd Quarter 2018
(Netherlands)
October 2018
(Malaysia)
Month unknown 2018
Month unknown 2019
(Asia)
Month unknown 2020
(North America)