ISO Update Supplement to ISOfocus May 2016

advertisement
ISO Update
Supplement to ISOfocus
May 2016
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International
Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been
reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The
DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 April to 30 April 2016
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 2
Fasteners
ISO/CD 4042
Fasteners — Electroplated coatings
TC 17
Steel
ISO/DTS 10719
Cast irons - Determination of non-combined carbon content - lnfrared absorption method after combustion in an induction
furnace
TC 22
Road vehicles
ISO/CD 15118-2
Road vehicles — Vehicle to grid communication interface — Part 2: Network and application protocol requirements
ISO/CD 11452-2
Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy
— Part 2: Absorber-lined shielded enclosure
ISO/DTS 222391
Road vehicles — Child seat presence and orientation detection system (CPOD) — Part 1: Specifications and test methods
ISO/DTS 222392
Road vehicles — Child seat presence and orientation detection system (CPOD) — Part 2: Resonator specification
ISO/DTS 222393
Road vehicles — Child seat presence and orientation detection system (CPOD) — Part 3: Labelling
TC 29
Small tools
ISO/CD TS
13399-306
Cutting tool data representation and exchange — Part 306: Creation and exchange of 3D models — Drills and countersinking tools for indexable inserts
ISO/CD TS
13399-403
Cutting tool data representation and exchange — Part 403: Creation and exchange of 3D models — Modelling of driven
tool units
ISO/CD TS
13399-406
Cutting tool data representation and exchange — Part 406: Creation and exchange of 3D models — Modelling of connection interface
TC 34
Food products
ISO
3656:2011/CD
Amd 1
Animal and vegetable fats and oils — Determination of ultraviolet absorbance expressed as specific UV extinction —
Amendment 1
ISO/DTS 215695
Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 5: Real-time PCR based screening method for the detection of the FMV promoter
(P-FMV) DNA sequence
TC 58
Gas cylinders
ISO/CD 10298
Gas cylinders — Gases and gas mixtures — Determination of toxicity for the selection of cylinder valve outlets
TC 61
Plastics
ISO/CD 15033
Plastics — Determination of caprolactam and its cyclic and linear oligomers by HPLC
ISO/CD 19721
Plastics — Abrasion test method for artificial turfs to evaluate the combined effects of mechanical wear and UV radiation
using sequential testing
ISO/CD 19821
Wood plastic composite (WPC) deck boards — Determination of span and load carrying capacity
ISO/CD 20975-2
Carbon-fibre-reinforced plastics — Methods for measurement of through-thickness laminate properties — Part 2: Considering size effects by flexural test
TC 82
Mining
ISO/CD 18758-1
Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 1: Terminology
ISO/CD 18758-2
Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 2: Safety requirements
ISO/CD 19434
Mining — Classification of mine accidents
TC 87
Cork
ISO/CD 1216
Corkwood in planks — Grading, classification and packing
TC 89
Wood-based panels
ISO/CD 2426-4
Plywood — Classification by surface appearance — Part 4: Palm-plywood
TC 106
Dentistry
ISO/CD 20608
Dentistry — Powder jet handpieces
ISO/CD 28158
Dentistry — Integrated dental floss and handles
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO/CD 21225-1
Plastics piping systems for the trenchless replacement of underground pipeline networks — Part 1: Replacement on the
line by pipe bursting and pipe removal
ISO/CD 21225-2
Plastics piping systems for the trenchless replacement of underground pipeline networks — Part 2: Replacement off the
line by horizontal directional drilling and impact moling
TC 147
Water quality
ISO/CD 10634
Water quality — Guidance for the preparation and treatment of poorly water-soluble organic compounds for the subsequent evaluation of their biodegradability in an aqueous medium
TC 150
Implants for surgery
ISO/CD 5832-2
Implants for surgery — Metallic materials — Part 2: Unalloyed titanium
TC 154
Processes, data elements and documents in commerce, industry and administration
ISO/CD 8601-1
Data elements and interchange formats — Information interchange — Representation of dates and times — Part 1: Basic
rules
ISO/CD 8601-2
Data elements and interchange formats — Information interchange — Representation of dates and times — Part 2: Extensions
TC 181
Safety of toys
ISO/CD 8124-6
Safety of toys — Part 6: Certain phthalate esters in toys and children's products
TC 184
Automation systems and integration
ISO/CD 20140-2
Automation systems and integration — Evaluating energy efficiency and other factors of manufacturing systems that influence the environment — Part 2: Environmental influence evaluation process
TC 186
Cutlery and table and decorative metal hollow-ware
ISO/CD 8442-9
Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 9: Requirements for ceramic knives
TC 197
Hydrogen technologies
ISO/CD 16111
Transportable gas storage devices — Hydrogen absorbed in reversible metal hydride
TC 201
Surface chemical analysis
ISO/CD 20579-4
Surface Chemical Analysis — Sample handling, preparation and mounting — Part 4: Nanomaterial reporting requirements, analysis challenges and solution extraction methods
TC 206
Fine ceramics
ISO/CD 19674
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of test for ceramic coatings — Determination of internal stress in ceramic coatings by application of the Stoney formula
TC 207
Environmental management
ISO/CD 14026
Environmental labels and declarations — Principles and procedures for communication of footprint information
ISO/CD 14064-3
Greenhouse gases — Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions
TC 229
Nanotechnologies
IEC/DTS 626074-4
Nanomanufacturing — Key control characteristics — Part 4-4: Nano-enabled electrical energy storage devices — Thermal characterization of nanomaterials, nail penetration method
TC 257
Evaluation of energy savings
ISO/CD 20619
Calculation methods for energy savings
CASCO
Committee on conformity assessment
ISO/IEC DTS
17021-9
Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 9:
Competence requirements for auditing and certification of anti-bribery management systems
JTC 1
Information technology
ISO/IEC CD
20546
Information Technology — Big Data — Definition and Vocabulary
ISO/IEC 144432/PDAM 3
Identification cards — Contactless integrated circuit cards — Proximity cards — Part 2: Radio frequency power and signal
interface — Amendment 3: Dynamic power level management
ISO/IEC 144433/PDAM 2
Identification cards — Contactless integrated circuit cards — Proximity cards — Part 3: Initialization and anticollision —
Amendment 2: Dynamic power level management
ISO/IEC 144434/PDAM 3
Identification cards — Contactless integrated circuit cards — Proximity cards — Part 4: Transmission protocol —
Amendment 3: Dynamic power level management
ISO/IEC CD
18745-1
Information technology — Test methods for machine readable travel documents (MRTD) and associated devices — Part
1: Physical test methods for passport books (durability)
ISO/IEC CD
16963
Information technology — Digitally recorded media for information interchange and storage — Test method for the estimation of lifetime of optical disks for long-term data storage
ISO/IEC CD
11801-9902
Information technology — Generic cabling for customer premises — Part 9902: End-to-end link model
ISO/IEC PDTR
11801-9904
Information technology — Generic cabling systems for customer premises — Part 9904: Guidelines for the use of
installed cabling to support 2,5GBASE -T and 5GBASE -T applications
ISO/IEC CD
14763-4
Information technology — Implementation and operation of customer premises cabling — Part 4: Measurement of End-toEnd (E2E)-Links
ISO/IEC CD
19941
Information Technology — Cloud Computing — Interoperability and Portability
DIS circulated
Period from 01 April to 30 April 2016
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 4
ISO/DIS 20015
Rolling bearings
*
Spherical plain bearings — Method for the calculation of static and dynamic load ratings
2016-07-21
TC 5
ISO/DIS 8179-1
Ferrous metal pipes and metallic fittings
*
Ductile iron pipes, fittings, accessories and valves — Part 1: Metallic zinc based coatings
2016-07-07
(Revision of ISO 8179-1:2004)
ISO/DIS 8179-2
*
Ductile iron pipes, fittings, accessories and valves external zinc based coatings. — Part 2:
Zinc rich paint coating
2016-07-07
(Revision of ISO 8179-2:1995)
TC 6
ISO/DIS 11480
Paper, board and pulps
*
Pulp, paper and board — Determination of total chlorine and organically bound chlorine
2016-07-21
(Revision of ISO 11480:1997)
TC 8
Ships and marine technology
IEC/IEEE DIS
80005-1
*
Utility connections in port — Part 1: High Voltage Shore Connection (HVSC) Systems —
General requirements
(Revision of ISO/IEC/IEEE 80005-1:2012)
TC 20
Aircraft and space vehicles
ISO
2635:2003/DAmd
1
*
ISO/DIS 15872
*
Aircraft — Conductors for general purpose aircraft electrical cables and aerospace applications — Dimensions and characteristics — Amendment 1: Correction of table 1
2016-07-07
Aerospace — UNJ threads — Gauging
2016-07-28
(Revision of ISO 15872:2002)
ISO/DIS 18170
ISO/DIS 18387
*
*
Aerospace series — AC induction electric motor driven, variable delivery, hydraulic
pumps — General requirements
2016-07-21
Aerospace — Linear hydraulic utility actuator — General specifications
2016-07-21
TC 22
ISO/DIS 26021-2
Road vehicles
*
Road vehicles — End-of-life activation of on-board pyrotechnic devices — Part 2: Communication requirements
(Revision of ISO 26021-2:2008, ISO 26021-2:2008/Cor 1:2009)
Internal combustion engines — Piston rings — Part 3: Coil-spring-loaded oil control rings
made of steel
ISO/DIS 66263.2
2016-06-13
(Revision of ISO 6626-3:2008)
ISO/DIS 12619-6
ISO/DIS 19723-1
*
*
Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas
blend fuel system components — Part 6: Automatic valve
2016-07-07
Road vehicles — Liquefied natural gas (LNG) fuel systems — Part 1: Safety requirements
2016-07-21
ISO/DIS 19723-2
*
Road vehicles — Liquefied natural gas (LNG) fuel systems — Part 2: Test methods
2016-07-21
TC 23
ISO/DIS 8437-1
Tractors and machinery for agriculture and forestry
*
Snow throwers — Safety requirements and test procedures — Part 1: Terminology and
common tests
2016-07-07
(Revision of ISO 8437:1989, ISO 8437:1989/Amd 1:1997)
ISO/DIS 8437-2
*
Snow throwers — Safety requirements and test procedures — Part 2: Pedestrian controlled snow throwers
2016-07-07
(Revision of ISO 8437:1989, ISO 8437:1989/Amd 1:1997)
ISO/DIS 8437-3
*
Snow throwers — Safety requirements and test procedures — Part 3: Ride-on snow
throwers
(Revision of ISO 8437:1989, ISO 8437:1989/Amd 1:1997)
ISO/DIS 8437-4
*
Snow throwers — Safety requirements and test procedures — Part 4: Information on
2016-07-07
national and regional provisions
2016-07-07
(Revision of ISO 8437:1989, ISO 8437:1989/Amd 1:1997)
ISO 116812:2011/DAmd 1
*
TC 27
ISO/DIS 1213-2
Machinery for forestry — Portable chain-saw safety requirements and testing — Part 2:
Chain-saws for tree service — Amendment 1
2016-07-14
Solid mineral fuels
*
Solid mineral fuels — Vocabulary — Part 2: Terms relating to sampling, testing and analysis
2016-07-14
(Revision of ISO 1213-2:1992)
TC 29
ISO/DIS 1832
Small tools
*
Indexable inserts for cutting tools — Designation
2016-07-28
(Revision of ISO 1832:2012)
ISO/DIS 2725-1
*
Assembly tools for screws and nuts — Square drive sockets — Part 1: Hand-operated
sockets
2016-07-26
(Revision of ISO 2725-1:2015)
ISO/DIS 2725-2
*
Assembly tools for screws and nuts — Square drive sockets — Part 2: Machine-operated
sockets ("impact")
2016-07-26
(Revision of ISO 2725-2:2015)
ISO/DIS 2725-3
*
Assembly tools for screws and nuts — Square drive sockets — Part 3: Machine-operated
sockets ("non-impact")
2016-07-26
(Revision of ISO 2725-3:2015)
TC 34
ISO/DIS 21294
Food products
*
Oilseeds — Manual or automatic discontinuous sampling
2016-07-21
(Revision of ISO 542:1990)
ISO/DIS 6658
*
Sensory analysis — Methodology — General guidance
2016-07-29
(Revision of ISO 6658:2005)
TC 35
ISO/DIS 119971.2
Paints and varnishes
*
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part
1: Wet (salt fog)/dry/humidity
2016-06-28
(Revision of ISO 11997-1:2005)
ISO/DIS 15110
*
Paints and varnishes — Artificial weathering including acidic deposition
2016-07-28
(Revision of ISO 15110:2013)
TC 37
ISO/DIS 18587.2
Terminology and other language and content resources
*
Translation services — Post-editing of machine translation output — Requirements
2016-06-18
TC 43
ISO/DIS 532-1
Acoustics
*
Acoustics — Methods for calculating loudness — Part 1: Zwicker method
2016-07-25
(Revision of ISO 532:1975)
ISO/DIS 532-2
*
Acoustics — Methods for calculating loudness — Part 2: Moore-Glasberg method
2016-07-25
(Revision of ISO 532:1975)
TC 44
ISO/DIS 18278-3
ISO/DIS 17279-1
ISO/DIS 17279-2
Welding and allied processes
*
*
*
TC 45
ISO/DIS 6472
Resistance welding — Weldability — Part 3: Evaluation procedures for weldability in spot
weld bonding
2016-07-28
Welding — Micro joining of 2nd generation high temperature superconductors — Part 1:
General requirements for the procedure
2016-07-07
Welding — Micro joining of 2nd generation high temperature superconductors — Part 2:
Qualification for welding and testing personnel
2016-07-07
Rubber and rubber products
*
Rubber compounding ingredients — Abbreviated terms
2016-07-21
(Revision of ISO 6472:2010)
ISO/DIS 10638
*
Rubber — Identification of antidegradants by gas chromatography/mass spectrometry
2016-07-14
(Revision of ISO 10638:2010)
ISO/DIS 19983
*
Rubber — Determination of precision of test methods
2016-07-07
ISO/DIS 1795
*
Rubber, raw natural and raw synthetic — Sampling and further preparative procedures
2016-07-21
(Revision of ISO 1795:2007)
ISO/DIS 11236
*
Rubber compounding ingredients — p-Phenylenediamine (PPD) antidegradants — Test
methods
2016-07-28
(Revision of ISO 11236:2000, ISO 11236:2000/Cor 1:2006)
ISO/DIS 20437
*
Natural rubber latex cleanroom gloves — Specification
2016-07-07
TC 46
ISO/DIS 3901
Information and documentation
*
Information and documentation — International Standard Recording Code (ISRC)
2016-07-07
(Revision of ISO 3901:2001)
TC 54
ISO/DIS 20809
Essential oils
*
Essential oil of cypress (Cupressus sempervirens L.)
2016-07-19
TC 59
ISO/DIS 6707-3
Buildings and civil engineering works
*
Buildings and civil engineering works - Vocabulary — Part 3: Sustainability terms
2016-07-07
TC 61
Plastics
ISO/DIS 166204.2
*
ISO/DIS 19699-1
*
ISO/DIS 19699-2
2016-06-07
*
TC 67
ISO/DIS 21809-5
Plastics — Biobased content — Part 4: Determination of the biobased mass content
Plastics — Superabsorbent polymer — Sodium polyacrylate resin for absorbing blood —
Part 1: Test methods
2016-07-27
Plastics — Superabsorbent polymer — Sodium polyacrylate resin for absorbing blood —
Part 2: Specifications
2016-07-27
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
*
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings
2016-07-21
(Revision of ISO 21809-5:2010)
TC 68
ISO/DIS 20275
Financial services
*
Financial services — Entity legal forms (ELF)
2016-07-21
TC 71
ISO/DIS 19595
Concrete, reinforced concrete and pre-stressed concrete
*
Natural aggregates for concrete
2016-07-04
ISO/DIS 13315-4
*
TC 76
ISO/DIS 8536-6
Environmental management for concrete and concrete structures — Part 4: Environmental design of concrete structures
2016-07-14
Transfusion, infusion and injection, and blood processing equipment for
medical and pharmaceutical use
*
Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles
2016-07-07
(Revision of ISO 8536-6:2009)
TC 77
ISO/DIS 8336
Products in fibre reinforced cement
*
Fibre-cement flat sheets — Product specification and test methods
2016-07-28
(Revision of ISO 8336:2009)
TC 84
ISO/DIS 11608-6
Devices for administration of medicinal products and catheters
*
Needle-based injection systems for medical use — Requirements and test methods —
Part 6: On-body delivery systems
TC 85
ISO/DIS 19581
Nuclear energy, nuclear technologies, and radiological protection
*
TC 86
ISO/DIS 14903
Measurement of radioactivity — Gamma emitting radionuclides — Rapid test method
using NaI(Tl) gamma-ray spectrometry
2016-07-29
Refrigeration and air-conditioning
*
Refrigerating systems and heat pumps — Qualification of tightness of components and
joints
2016-07-14
(Revision of ISO 14903:2012)
TC 92
ISO/DIS 13943
Fire safety
*
Fire safety — Vocabulary
2016-07-28
(Revision of ISO 13943:2008)
ISO/DIS 3008-2
*
Fire-resistance tests — Part 2: Lift landing door assemblies
2016-07-28
(Revision of ISO 3008-2:2014)
TC 98
ISO/DIS 3010
Bases for design of structures
*
Bases for design of structures — Seismic actions on structures
2016-07-14
(Revision of ISO 3010:2001)
TC 106
ISO/DIS 22112
Dentistry
*
Dentistry — Artificial teeth for dental prostheses
2016-07-07
(Revision of ISO 22112:2005)
ISO/DIS 14457
*
Dentistry — Handpieces and motors
2016-07-21
(Revision of ISO 14457:2012)
TC 107
ISO/DIS 2360
Metallic and other inorganic coatings
*
Non-conductive coatings on non-magnetic electrically conductive base metals — Measurement of coating thickness — Amplitude-sensitive eddy-current method
2016-07-28
(Revision of ISO 2360:2003)
ISO/DIS 2081
*
Metallic and other inorganic coatings — Electroplated coatings of zinc with supplementary
treatments on iron or steel
2016-07-07
(Revision of ISO 2081:2008)
ISO/DIS 2082
*
Metallic and other inorganic coatings — Electroplated coatings of cadmium with supplementary treatments on iron or steel
(Revision of ISO 2082:2008)
ISO/DIS 27830
*
Metallic and other inorganic coatings — Guidelines for specifying metallic and inorganic
2016-07-07
coatings
2016-07-07
(Revision of ISO 27830:2008)
ISO/DIS 9717
*
Metallic and other inorganic coatings — Phosphate conversion coating of metals
2016-07-28
(Revision of ISO 9717:2010)
TC 113
ISO/DIS 1438
Hydrometry
*
Hydrometry — Open channel flow measurement using thin-plate weirs
2016-07-26
(Revision of ISO 1438:2008, ISO 1438:2008/Cor 1:2008)
ISO/DIS 18481
*
Hydrometry — Liquid flow measurement using end depth method in channels with a free
overfall
2016-07-21
(Revision of ISO 3847:1977, ISO 4371:1984)
TC 127
ISO/DIS 10987-2
Earth-moving machinery
*
Earth-moving machinery — Sustainability — Part 2: Remanufacturing
2016-07-28
ISO/DIS 10987-3
*
Earth-moving machinery — Sustainability — Part 3: Used machines
2016-07-28
ISO/DIS 16001
*
Earth-moving machinery — Object detection systems and visibility aids — Performance
requirements and tests
2016-07-14
(Revision of ISO 16001:2008)
TC 134
ISO/DIS 21263
Fertilizers and soil conditioners
*
Determination of release rate of nutrients
2016-07-27
TC 135
ISO/DIS 15708-1
Non-destructive testing
*
Non-destructive testing — Radiation methods — Computed tomography — Part 1: Principle, equipment and samples
2016-07-07
(Revision of ISO 15708-1:2002)
ISO/DIS 15708-2
*
Non-destructive testing - Radiation methods — Computed Tomography — Part 2: Operation and interpretation
2016-07-07
(Revision of ISO 15708-2:2002)
ISO/DIS 15708-3
ISO/DIS 15708-4
*
*
TC 147
ISO/DIS 20227
Non-destructive testing — Radiation methods — Computed tomography — Part 3: Terminology
2016-07-07
Non-destructive testing — Radiation methods — Computed tomography — Part 4: Qualification
2016-07-07
Water quality
*
Water quality — Determination of the growth inhibition effects of waste waters, natural
waters and chemicals on the duckweed Spirodela polyrhiza — Method using a stock
2016-07-28
culture independent microbiotest
TC 150
ISO/DIS 8637-1
Implants for surgery
*
Extracorporeal systems for blood purification — Part 1: Haemodialysers, haemodiafilters,
haemofilters and haemoconcentrators
2016-07-21
(Revision of ISO 8637:2010, ISO 8637:2010/Amd 1:2013)
ISO/DIS 8637-2
*
Extracorporeal systems for blood purification — Part 2: Extracorporeal blood circuit for
haemodialysers, haemodiafilters and haemofilters
2016-07-21
(Revision of ISO 8638:2010)
ISO/DIS 8637-3
*
Extracorporeal systems for blood purification — Part 3: Plasmafilters
2016-07-21
(Revision of ISO 13960:2010)
TC 156
ISO/DIS 18897
Corrosion of metals and alloys
*
TC 158
ISO/DIS 12963
2016-07-07
Analysis of gases
*
TC 159
ISO/DIS 7250-1
Corrosion of metals and alloys — Standard test method for particle-free erosion corrosion
of metallic materials by jet-in-slit
Gas analysis — Comparison methods for the determination of the composition of gas
mixtures based on one- and two-point calibration
Ergonomics
*
Basic human body measurements for technological design — Part 1: Body measurement
definitions and landmarks
2016-07-29
(Revision of ISO 7250-1:2008)
TC 164
ISO/DIS 6506-2
Mechanical testing of metals
*
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing
machines
2016-07-28
(Revision of ISO 6506-2:2014)
TC 171
ISO/DIS 22938
Document management applications
*
Document management — Electronic content/document management (CDM) data interchange format
(Revision of ISO 22938:2008)
TC 172
ISO/DIS 10110-7
Optics and photonics
*
Optics and photonics — Preparation of drawings for optical elements and systems — Part
7: Surface imperfections
(Revision of ISO 10110-7:2008)
ISO/DIS 14997
*
Optics and photonics — Test methods for surface imperfections of optical elements
(Revision of ISO 14997:2011)
ISO/DIS 18369-1
*
Ophthalmic optics — Contact lenses — Part 1: Vocabulary, classification system and
2016-07-21
recommendations for labelling specifications
2016-07-21
(Revision of ISO 18369-1:2006, ISO 18369-1:2006/Amd 1:2009)
ISO/DIS 18369-2
*
Ophthalmic optics — Contact lenses — Part 2: Tolerances
2016-07-21
(Revision of ISO 18369-2:2012)
ISO/DIS 18369-3
*
Ophthalmic optics — Contact lenses — Part 3: Measurement methods
2016-07-21
(Revision of ISO 18369-3:2006)
ISO/DIS 18369-4
*
Ophthalmic optics — Contact lenses — Part 4: Physicochemical properties of contact
lens materials
2016-07-21
(Revision of ISO 18369-4:2006)
TC 173
ISO/DIS 15621
Assistive products for persons with disability
*
Absorbent incontinence aids for urine and/or faeces — General guidelines on evaluation
2016-07-21
(Revision of ISO 15621:2011)
TC 180
ISO/DIS 9806
Solar energy
*
Solar energy — Solar thermal collectors — Test methods
2016-07-28
(Revision of ISO 9806:2013)
TC 181
Safety of toys
ISO 81241:2014/DAmd 1.2
*
ISO 81241:2014/DAmd 2
*
ISO 81241:2014/DAmd 3
*
ISO 81241:2014/DAmd 4
*
TC 184
ISO/DIS 15746-2
2016-06-11
Safety of toys — Part 1: Safety aspects related to mechanical and physical properties —
Amendment 2: Various
2016-07-11
Safety of toys — Part 1: Safety aspects related to mechanical and physical properties —
Amendment 3: Warnings and fibrous filling material
2016-07-11
Safety of toys — Part 1: Safety aspects related to mechanical and physical properties —
Amendment 4: Acoustics
2016-07-11
Automation systems and integration
*
TC 190
ISO/DIS 19258
Safety of toys — Part 1: Safety aspects related to mechanical and physical properties —
Amendment 1: Cords
Automation systems and integration — Integration of advanced process control and optimization capabilities for manufacturing systems — Part 2: Activity models and information
exchange
2016-07-26
Soil quality
*
Soil quality — Guidance on the determination of background values
2016-07-14
(Revision of ISO 19258:2005)
TC 195
Building construction machinery and equipment
ISO/DIS 19720-1
*
TC 198
ISO/DIS 17664
Building construction machinery and equipment — Plants for the preparation of concrete
and mortar — Part 1: Terminology and commercial specifications
2016-07-07
Sterilization of health care products
*
Processing of health care products — Information to be provided by the medical device
manufacturer for the processing of medical devices
2016-07-28
(Revision of ISO 17664:2004)
TC 206
ISO/DIS 17168-1
ISO/DIS 17168-2
ISO/DIS 17168-3
ISO/DIS 17168-4
ISO/DIS 17168-5
ISO/DIS 19618
Fine ceramics
*
*
*
*
*
*
TC 207
ISO/DIS 14052
*
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for airpurification performance of semiconducting photocatalytic materials under indoor lighting
environment — Part 2: Removal of acetaldehyde
2016-07-28
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for airpurification performance of semiconducting photocatalytic materials under indoor lighting
environment — Part 3: Removal of toluene
2016-07-28
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for airpurification performance of semiconducting photocatalytic materials under indoor lighting
environment — Part 4: Removal of formaldehyde
2016-07-28
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for airpurification performance of semiconducting photocatalytic materials under indoor lighting
environment — Part 5: Removal of methyl mercaptan
2016-07-28
Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement
method for normal spectral emissivity using blackbody reference with an FTIR spectrometer
2016-07-28
Environmental management — Material flow cost accounting — Guidance for practical
implementation in a supply chain
2016-07-21
Cleanrooms and associated controlled environments
*
TC 211
ISO/DIS 19160-4
2016-07-28
Environmental management
TC 209
ISO/DIS 1464415
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for airpurification performance of semiconducting photocatalytic materials under indoor lighting
environment — Part 1: Removal of nitric oxide
Cleanrooms and associated controlled environments — Part 15: Assessment of suitability
for use of equipment and materials by airborne chemical concentration
2016-07-07
Geographic information/Geomatics
*
Addressing — Part 4: International postal address components and template languages
2016-07-28
TC 218
ISO/DIS 1306115
Timber
*
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 15: Determination of radial and tangential swelling
2016-07-21
(Revision of ISO 4859:1982)
ISO/DIS 1306116
*
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 16: Determination of volumetric swelling
(Revision of ISO 4860:1982)
TC 225
Market, opinion and social research
2016-07-21
ISO/DIS 19731
*
TC 249
ISO/DIS 19610
2016-07-21
Traditional chinese medicine
*
TC 268
ISO/DIS 37102
Digital analytics and web analyses in market, opinion and social research — Vocabulary
and service requirements
Traditional Chinese medicine — General requirements for industrial manufacturing process of red ginseng (Panax ginseng C.A. Meyer)
2016-07-14
Sustainable development in communities
*
Sustainable development and resilience of communities — Vocabulary
2016-07-02
TC 292
ISO/DIS 22316
Security and resilience
*
Security and resilience — Guidelines for organizational resilience
2016-07-14
ISO/DIS 22319
*
JTC 1
Security and resilience — Guidelines for planning the involvement of spontaneous volunteers
2016-07-07
Information technology
ISO/IEC DIS
30182
*
ISO/IEC DIS
30754
*
ISO/IEC 144432/DAmd 1
*
ISO/IEC 144432/DAmd 2
*
ISO/IEC DIS
23009-2
*
Smart city concept model — Guidance for establishing a model for data interoperability
2016-07-07
Information technology — Software trustworthiness — Governance and management —
Specification
2016-07-06
Identification cards — Contactless integrated circuit cards — Proximity cards — Part 2:
Radio frequency power and signal interface — Amendment 1: Parameters supporting
active and passive PICC transmissions
2016-07-14
Identification cards — Contactless integrated circuit cards — Proximity cards — Part 2:
Radio frequency power and signal interface — Amendment 2: Limits of electromagnetic
disturbance levels for all PICC classes
2016-07-28
Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 2:
Conformance and reference software
2016-07-29
(Revision of ISO/IEC 23009-2:2014)
ISO/IEC DIS
30113-11
*
ISO/IEC DIS
30122-2
*
ISO/IEC DIS
30122-3
*
ISO/IEC DIS
24709-1
*
Information technology — Gesture-based interfaces across devices and methods — Part
11: Single-point gestures for common system actions
2016-07-28
Information technology — User interfaces — Voice commands — Part 2: Constructing
and testing
2016-07-28
Information technology — User interfaces — Voice commands — Part 3: Translation and
localization
2016-07-28
Information technology — Conformance testing for BioAPI — Part 1: Methods and procedures
2016-07-14
(Revision of ISO/IEC 24709-1:2007)
FDIS circulated
Period from 01 April to 30 April 2016
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 6
ISO/FDIS 11475
Paper, board and pulps
*
Paper and board — Determination of CIE whiteness, D65/10 degrees (outdoor daylight)
2016-06-19
(Revision of ISO 11475:2004)
TC 20
ISO/FDIS 27852
Aircraft and space vehicles
*
Space systems — Estimation of orbit lifetime
2016-06-12
(Revision of ISO 27852:2011)
TC 24
ISO/FDIS 3310-1
Particle characterization including sieving
*
Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire
cloth
2016-06-11
(Revision of ISO 3310-1:2000, ISO 3310-1:2000/Cor 1:2004)
TC 28
ISO/FDIS 3924
Petroleum products and related products of synthetic or biological origin
*
Petroleum products — Determination of boiling range distribution — Gas chromatography
method
2016-06-15
(Revision of ISO 3924:2010)
TC 29
ISO/FDIS 240
Small tools
*
Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandrels
2016-06-08
(Revision of ISO 240:1994)
ISO/FDIS 866
*
Centre drills for centre holes without protecting chamfers — Type A
2016-06-19
(Revision of ISO 866:1975)
ISO/FDIS 10897
*
Collets for tool holders with taper ratio 1:10 — Collets, holders, nuts
2016-06-19
(Revision of ISO 10897:1996)
TC 34
ISO/FDIS 12824
Food products
*
Royal jelly — Specifications
2016-06-19
ISO/FDIS 118162
*
Milk and milk products — Determination of alkaline phosphatase activity — Part 2: Fluorometric method for cheese
2016-06-29
(Revision of ISO 11816-2:2003)
TC 35
ISO/FDIS 1514
Paints and varnishes
*
Paints and varnishes — Standard panels for testing
2016-06-08
(Revision of ISO 1514:2004)
ISO/FDIS 3248
*
Paints and varnishes — Determination of the effect of heat
2016-06-08
(Revision of ISO 3248:1998)
ISO/FDIS 4623-2
*
Paints and varnishes — Determination of resistance to filiform corrosion — Part 2: Aluminium substrates
2016-06-22
(Revision of ISO 4623-2:2003, ISO 4623-2:2003/Cor 1:2005)
TC 43
ISO 3897:2005/FDAmd 1
Acoustics
*
TC 44
ISO/FDIS 3677
Acoustics — Reference zero for the calibration of audiometric equipment — Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions —
Amendment 1: Reference threshold of hearing at 20 Hz and 18 000 Hz under free-field
listening conditions and at 20 Hz under diffuse-field listening conditions
2016-06-08
Welding and allied processes
*
Filler metal for soft soldering, brazing and braze welding — Designation
2016-06-29
(Revision of ISO 3677:1992)
ISO/FDIS 17672
*
Brazing — Filler metals
2016-06-29
(Revision of ISO 17672:2010)
ISO/FDIS 156181
*
Qualification testing of welders for underwater welding — Part 1: Hyperbaric wet welding
2016-06-08
(Revision of ISO 15618-1:2001)
TC 45
ISO/FDIS 9924-1
Rubber and rubber products
*
Rubber and rubber products — Determination of the composition of vulcanizates and
uncured compounds by thermogravimetry — Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
2016-06-05
(Revision of ISO 9924-1:2000)
ISO/FDIS 9924-2
*
Rubber and rubber products — Determination of the composition of vulcanizates and
uncured compounds by thermogravimetry — Part 2: Acrylonitrile-butadiene and halobutyl
2016-06-05
rubbers
(Revision of ISO 9924-2:2000, ISO 9924-2:2000/Amd 1:2012)
ISO/FDIS 19246
*
Rubber compounding ingredients — Silica — Oil absorption of precipitated silica
2016-06-05
TC 61
ISO/FDIS 14853
Plastics
*
Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in
an aqueous system — Method by measurement of biogas production
2016-06-13
(Revision of ISO 14853:2005, ISO 14853:2005/Cor 1:2009)
TC 67
ISO/FDIS 14224
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
*
Petroleum, petrochemical and natural gas industries — Collection and exchange of reliability and maintenance data for equipment
2016-06-22
(Revision of ISO 14224:2006)
ISO/FDIS 19008
*
Standard cost coding system for oil and gas production and processing facilities
2016-06-24
TC 84
ISO/FDIS 7864
Devices for administration of medicinal products and catheters
*
Sterile hypodermic needles for single use — Requirements and test methods
2016-06-15
(Revision of ISO 7864:1993)
ISO/FDIS 116087
*
TC 94
ISO/FDIS 119996
2016-06-15
Personal safety -- Protective clothing and equipment
*
TC 106
ISO/FDIS 17254
Needle-based injection systems for medical use — Requirements and test methods —
Part 7: Accessibility for persons with visual impairment
PPE for firefighters — Test methods and requirements for PPE used by firefighters who
are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in
structures — Part 6: Footwear
2016-06-19
Dentistry
*
Dentistry — Coiled springs for use in orthodontics
2016-06-15
TC 110
ISO/FDIS 229157
Industrial trucks
*
Industrial trucks — Verification of stability — Part 7: Bidirectional and multidirectional
trucks
2016-06-12
(Revision of ISO 22915-7:2009)
TC 121
ISO/FDIS 5361
Anaesthetic and respiratory equipment
*
Anaesthetic and respiratory equipment — Tracheal tubes and connectors
2016-06-14
(Revision of ISO 5361:2012)
ISO/FDIS 5364
*
Anaesthetic and respiratory equipment — Oropharyngeal airways
2016-06-14
(Revision of ISO 5364:2008)
TC 131
ISO/FDIS 16656
Fluid power systems
*
Hydraulic fluid power — Single rod, short-stroke cylinders with bores from 32 mm to 100
mm for use at 10 MPa (100 bar) — Mounting dimensions
2016-06-08
(Revision of ISO 16656:2004)
ISO/FDIS 12829
*
TC 145
ISO/FDIS 285642
*
Public information guidance systems — Part 2: Design principles and requirements for
location signs and direction signs
2016-06-12
Air quality
*
TC 150
ISO/FDIS 7198
2016-06-12
Graphical symbols
TC 146
ISO/FDIS 222623
Hydraulic spin-on filters with finite lives — Method for verifying the rated fatigue life and
the rated static burst pressure of the pressure-containing envelope
Air quality — Bulk materials — Part 3: Quantitative determination of asbestos by X-ray
diffraction method
Implants for surgery
*
Cardiovascular implants and extracorporeal systems — Vascular prostheses — Tubular
vascular grafts and vascular patches
2016-06-08
(Revision of ISO 7198:1998)
ISO/FDIS 142422
*
Implants for surgery — Wear of total hip-joint prostheses — Part 2: Methods of measurement
2016-06-30
(Revision of ISO 14242-2:2000)
ISO/FDIS 142432
*
Implants for surgery — Wear of total knee-joint prostheses — Part 2: Methods of measurement
2016-06-30
(Revision of ISO 14243-2:2009)
TC 159
ISO/FDIS 6385
Ergonomics
*
Ergonomics principles in the design of work systems
2016-06-15
(Revision of ISO 6385:2004)
TC 163
ISO/FDIS 12572
Thermal performance and energy use in the built environment
*
Hygrothermal performance of building materials and products — Determination of water
vapour transmission properties — Cup method
2016-06-15
(Revision of ISO 12572:2001)
TC 164
ISO/FDIS 6508-1
Mechanical testing of metals
*
Metallic materials — Rockwell hardness test — Part 1: Test method
2016-06-22
(Revision of ISO 6508-1:2015)
TC 172
ISO/FDIS 9022-1
Optics and photonics
*
Optics and photonics — Environmental test methods — Part 1: Definitions, extent of test-
ing
2016-06-05
(Revision of ISO 9022-1:2012)
ISO/FDIS 902223
*
Optics and photonics — Environmental test methods — Part 23: Low pressure combined
with cold, ambient temperature and dry and damp heat
2016-06-05
(Revision of ISO 9022-23:2013)
TC 215
ISO/IEEE FDIS
11073-10417
Health informatics
*
Health informatics — Personal health device communication — Part 10417: Device specialization — Glucose meter
2016-09-07
(Revision of ISO/IEEE 11073-10417:2014)
TC 221
ISO/FDIS 9863-1
Geosynthetics
*
Geosynthetics — Determination of thickness at specified pressures — Part 1: Single
layers
2016-06-08
(Revision of ISO 9863-1:2005)
IULTCS
ISO/FDIS 19076
International Union of Leather Technologists and Chemists Societies
*
Leather — Measurement of leather surface — Using electronic techniques
2016-06-29
JTC 1
Information technology
ISO/IEC/IEEE
FDIS 29119-5
*
Software and systems engineering — Software testing — Part 5: Keyword-driven testing
ISO/IEC FDIS
18745-2
*
Test methods for machine readable travel documents (MRTD) and associated readers —
Part 2: Test methods for the contactless interface
ISO/IEC 138181:2015/FDAmd 5
ISO/IEC 2300111:2015/FDAmd
1
*
ISO/IEC 230033:2012/FDAmd 3
*
ISO/IEC FDIS
23005-1
*
2016-06-29
Information technology — Generic coding of moving pictures and associated audio information — Part 1: Systems — Amendment 5: Carriage of MPEGH 3D audio over MPEG2
systems
2016-06-16
Information technology — MPEG systems technologies — Part 11: Energy-efficient media
consumption (green metadata) — Amendment 1: Carriage of Green Metadata in an
HEVC SEI Message
2016-06-21
Information technology — MPEG audio technologies — Part 3: Unified speech and audio
coding — Amendment 3: Support of MPEG-D DRC, Audio Pre-Roll and Immediate PlayOut Frame
2016-06-21
Information technology — Media context and control — Part 1: Architecture
2016-06-05
(Revision of ISO/IEC 23005-1:2014)
ISO/IEC FDIS
29187-1
*
Information technology — Identification of privacy protection requirements pertaining to
learning, education and training (LET) — Part 1: Framework and reference model
(Revision of ISO/IEC 29187-1:2013)
2016-06-23
Standards published
New International Standards published between 01 April and 30 April 2016
* Available in English only
** French version of standard previously published in English only
Price group
TC 5
ISO 16132:2016
Ferrous metal pipes and metallic fittings
*
Ductile iron pipes and fittings — Seal coats for cement mortar linings
C
TC 6
ISO 8254-3:2016
Paper, board and pulps
*
TC 8
ISO 15364:2016
Paper and board — Measurement of specular gloss — Part 3: 20 degree gloss with a converging beam, TAPPI method
B
Ships and marine technology
*
Ships and marine technology — Pressure/vacuum valves for cargo tanks
E
Ships and marine technology — Inland navigation vessels — Mounting attachments for demountable signal masts for push-tows
ISO 7236:2014
TC 17
ISO 4955:2016
B
Steel
*
Heat-resistant steels
F
ISO 17745:2016
*
Steel wire ring net panels — Definitions and specifications
C
ISO 17746:2016
*
Steel wire rope net panels and rolls — Definitions and specifications
D
ISO 220342:2016
*
A
TC 20
ISO 17520:2016
TC 21
Steel wire and wire products — Part 2: Tolerances on wire dimensions
Aircraft and space vehicles
*
Space environment (natural and artificial) — Cosmic ray and solar energetic particle penetration inward the magnetosphere — Method of determination of the effective vertical cut-off
rigidity
Equipment for fire protection and fire fighting
B
ISO 724024:2016
*
Fire detection and fire alarm systems — Part 24: Fire alarm loudspeakers
F
TC 22
Road vehicles
ISO 150313:2016
*
ISO 157652:2016
*
ISO 157654:2016
*
ISO 109241:2016
*
ISO 109245:2016
*
ISO 136742:2016
*
Road vehicles — Communication between vehicle and external equipment for emissionsrelated diagnostics — Part 3: Diagnostic connector and related electrical circuits: Specification and use
A
Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 2:
Transport protocol and network layer services
G
Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 4:
Requirements for emissions-related systems
E
Road vehicles — Circuit breakers — Part 1: Definitions and general test requirements
C
Road vehicles — Circuit breakers — Part 5: Circuit breakers with bolt with rated voltage of
450 V
B
Road vehicles — Test method for the quantification of on-centre handling — Part 2: Transition
test
C
Road vehicles — Pedestrian protection — Head impact test method
ISO 14513:2016
B
ISO/PAS
19295:2016
*
ISO 126193:2014/Amd
1:2016
*
ISO 155002:2016
*
B
TC 24
ISO 159011:2016
Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend
fuel system components — Part 3: Pressure regulator — Amendment 1: .
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 2: Performance and general test methods
XZ
B
Particle characterization including sieving
*
TC 25
ISO/TR 9453:2016
Electrically propelled road vehicles — Specification of voltage sub-classes for voltage class B
Evaluation of pore size distribution and porosity of solid materials by mercury porosimetry and
gas adsorption — Part 1: Mercury porosimetry
D
Cast irons and pig irons
*
Microstructure of cast irons — Part 3: Matrix structures
F
TC 31
Tyres, rims and valves
ISO 10571:2016
Tyres for mobile cranes and similar specialized machines
B
TC 33
ISO 18886:2016
Refractories
*
Refractory test-piece preparation — Gunning refractory panels by wet gunning techniques
B
TC 34
Food products
Milk and milk products — Determination of nitrogen content — Part 4: Determination of protein and non-protein nitrogen content and true protein content calculation (Reference method)
ISO 8968-4:2016
B
Animal and vegetable fats and oils — Determination of moisture and volatile matter content
ISO 662:2016
B
Animal and vegetable fats and oils — Determination of oxidative stability (accelerated oxidation test)
ISO 6886:2016
ISO/TS 220026:2016
Prerequisite programmes on food safety — Part 6: Feed and animal food production
TC 35
Paints and varnishes
ISO 19399:2016
C
*
TC 36
ISO 21727:2016
C
Paints and varnishes — Wedge-cut method for determination of film thickness (scribe and drill
method)
E
Cinematography
*
Cinematography — Method of measurement of perceived loudness of short duration motionpicture audio material
TC 38
Textiles
ISO 182541:2016
Textiles — Method for the detection and determination of alkylphenol ethoxylates (APEO) —
Part 1: Method using HPLC-MS
TC 45
Rubber and rubber products
ISO 2782-1:2016
Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 1:
Differential-pressure methods
TC 46
Information and documentation
ISO 154891:2016
Information and documentation — Records management — Part 1: Concepts and principles
TC 58
Gas cylinders
ISO 14456:2015
Gas cylinders — Gas properties and associated classification (FTSC) codes
A
B
C
D
C
ISO 16148:2016
*
TC 59
ISO 294811:2016
Gas cylinders — Refillable seamless steel gas cylinders and tubes — Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing
E
Buildings and civil engineering works
*
Building information models — Information delivery manual — Part 1: Methodology and format
E
TC 61
Plastics
ISO 10431:2011/Amd
1:2016
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics — Amendment 1: New symbol ST for syndiotactic
XZ
ISO 10434:1998/Amd
1:2016
Plastics — Symbols and abbreviated terms — Part 4: Flame retardants — Amendment 1:
Code numbers
XZ
Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance
ISO 4892-1:2016
D
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO 1166511:2016
Measurement of radioactivity in the environment — Air: radon-222 — Part 11: Test method for
soil gas with sampling at depth
TC 94
Personal safety -- Protective clothing and equipment
ISO 169007:2015
Respiratory protective devices — Methods of test and test equipment — Part 7: Practical
performance test methods
B
ISO 1690014:2015
Respiratory protective devices — Methods of test and test equipment — Part 14: Measurement of sound level
B
Respiratory protective devices — Classification for respiratory protective device (RPD), excluding RPD for underwater application
E
ISO/TS
16973:2016
*
TC 96
Cranes
ISO
4305:2014/Amd
1:2016
Mobile cranes — Determination of stability — Amendment 1
TC 102
Iron ore and direct reduced iron
ISO/TR
18231:2016
D
XZ
*
Iron ores — Wavelength dispersive X-ray fluorescence spectrometers — Determination of
precision
TC 106
Dentistry
ISO 2157:2016
Dentistry — Nominal diameters and designation code numbers for rotary instruments
D
A
Dentistry — Laboratory cutters — Part 1: Steel laboratory cutters
ISO 7787-1:2016
B
Dentistry — Intraoral spatulas
ISO 18556:2016
A
TC 108
ISO 298212:2016
Mechanical vibration, shock and condition monitoring
*
TC 110
ISO 115254:2016
Condition monitoring and diagnostics of machines — Ultrasound — Part 2: Procedures and
validation
B
Industrial trucks
*
Rough-terrain trucks — User requirements — Part 4: Additional requirements for variablereach trucks handling freely suspended loads
TC 114
Horology
ISO 1413:2016
Horology — Shock-resistant wrist watches
B
E
TC 118
Compressors and pneumatic tools, machines and equipment
ISO
Displacement compressors — Acceptance tests — Amendment 1: Calculation of isentropic
1217:2009/Amd
1:2016
efficiency and relationship with specific energy
TC 127
Earth-moving machinery
ISO 121172:2008/Amd
1:2016
Earth-moving machinery — Laboratory tests and performance requirements for protective
structures of excavators — Part 2: Roll-over protective structures (ROPS) for excavators of
over 6 t — Amendment 1
ISO 8812:2016
Earth-moving machinery — Backhoe loaders — Terminology and commercial specifications
XZ
XZ
D
TC 130
ISO 5776:2016
Graphic technology
*
Graphic technology — Symbols for text proof correction
E
ISO 18620:2016
*
Graphic technology — Prepress data exchange — Tone adjustment curves exchange
B
TC 131
Fluid power systems
ISO 12191:2012/Amd
1:2016
Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1:
Graphical symbols for conventional use and data-processing applications — Amendment 1
TC 133
Clothing sizing systems - size designation, size measurement methods and
digital fittings
ISO 18163:2016
*
XZ
Clothing — Digital fittings — Vocabulary and terminology used for the virtual garment
C
ISO 18831:2016
*
Clothing — Digital fittings — Attributes of virtual garments
C
TC 134
Fertilizers and soil conditioners
ISO 148201:2016
*
ISO 148202:2016
*
ISO 15604:2016
*
ISO 18644:2016
Fertilizers and liming materials — Sampling and sample preparation — Part 1: Sampling
F
*
Fertilizers and liming materials — Sampling and sample preparation — Part 2: Sample preparation
B
Fertilizers — Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
D
Fertilizers and soil conditioners — Controlled-release fertilizer — General requirements
A
ISO 25475:2016
*
Fertilizers — Determination of ammoniacal nitrogen
B
ISO 25705:2016
*
TC 147
ISO 17943:2016
Fertilizers — Determination of urea condensates using high-performance liquid chromatography (HPLC) — Isobutylidenediurea and crotonylidenediurea (method A) and methylen-urea
oligomers (method B)
C
Water quality
*
Water quality — Determination of volatile organic compounds in water — Method using headspace solid-phase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS)
F
ISO 18635:2016
*
Water quality — Determination of short-chain polychlorinated alkanes (SCCPs) in sediment,
sewage sludge and suspended (particulate) matter — Method using gas chromatographymass spectrometry (GC-MS) and electron capture negative ionization (ECNI)
E
Water quality — Sampling — Part 6: Guidance on sampling of rivers and streams
ISO 5667-6:2014
D
ISO 566724:2016
*
H
TC 153
ISO 7121:2016
Water quality — Sampling — Part 24: Guidance on the auditing of water quality sampling
Valves
*
Steel ball valves for general-purpose industrial applications
D
TC 159
ISO 24505:2016
Ergonomics
*
TC 165
ISO 12578:2016
Ergonomics — Accessible design — Method for creating colour combinations taking account
of age-related changes in human colour vision
D
Timber structures
*
Timber structures — Glued laminated timber — Component performance requirements
C
ISO 18324:2016
*
Timber structures — Test methods — Floor vibration performance
C
ISO 19049:2016
*
TC 190
ISO 17183:2016
Timber structures — Test method — Static load tests for horizontal diaphragms including
floors and roofs
Soil quality
*
ISO 18187:2016
Soil quality — Screening soils for isopropanol-extractable organic compounds by determining
emulsification index by light attenuation
B
Soil quality — Contact test for solid samples using the dehydrogenase activity of Arthrobacter
globiformis
D
TC 204
Intelligent transport systems
ISO 245343:2016
Intelligent transport systems — Automatic vehicle and equipment identification — Electronic
registration identification (ERI) for vehicles — Part 3: Vehicle data
TC 206
Fine ceramics
ISO 14704:2016
ISO 17562:2016
ISO 19635:2016
*
*
*
TC 210
IEC/TR 62366-
B
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural
strength of monolithic ceramics at room temperature
E
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for linear
thermal expansion of monolithic ceramics by push-rod technique
C
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for antialgal activity of semiconducting photocatalytic materials
B
Quality management and corresponding general aspects for medical devices
*
G
Medical devices — Part 2: Guidance on the application of usability engineering to medical
2:2016
devices
TC 211
Geographic information/Geomatics
ISO 19119:2016
Geographic information — Services
H
H
ISO/TS 191592:2016
*
Geographic information — Calibration and validation of remote sensing imagery sensors and
data — Part 2: Lidar
TC 213
Dimensional and geometrical product specifications and verification
ISO 3040:2016
Geometrical product specifications (GPS) — Dimensioning and tolerancing — Cones
E
D
ISO 1036010:2016
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 10: Laser trackers for measuring point-to-point distances
ISO 251781:2016
Geometrical product specifications (GPS) — Surface texture: Areal — Part 1: Indication of
surface texture
TC 216
Footwear
ISO 10734:2016
Footwear — Test method for slide fasteners — Strength of slide fastener pullers
F
D
A
Footwear — Test methods for slide fasteners — Resistance to repeated opening and closing
ISO 10751:2016
A
Footwear — Test methods for slide fasteners — Lateral strength
ISO 10764:2016
A
Footwear — Test methods for uppers and lining — Flex resistance
ISO 17694:2016
A
Footwear — Test methods for uppers, lining and insocks — Seam strength
ISO 17697:2016
B
Footwear — Test methods for uppers — Delamination resistance
ISO 17698:2016
B
Footwear — Test methods for uppers, lining and insocks — Colour migration
ISO 17701:2016
A
Footwear — Test methods for slide fasteners — Resistance to damage during closure under
a lateral force
ISO 18403:2016
A
Footwear — Test methods for insoles and insocks — Water absorption and desorption
ISO 22649:2016
B
TC 229
ISO/TR
19716:2016
Nanotechnologies
*
Nanotechnologies — Characterization of cellulose nanocrystals
F
TC 257
Evaluation of energy savings
ISO 17741:2016
General technical rules for measurement, calculation and verification of energy savings of
projects
TC 272
Forensic sciences
ISO 18385:2016
Minimizing the risk of human DNA contamination in products used to collect, store and analyze biological material for forensic purposes — Requirements
JTC 1
C
D
Information technology
ISO/IEC
10646:2014/Amd
2:2016
*
ISO/IEC/IEEE
18881:2016
*
ISO/IEC/IEEE
18883:2016
*
ISO/IEC 197703:2016
*
ISO/IEC TS
24748-1:2016
*
ISO/IEC
26551:2016
*
ISO/IEC TR
29110-2-2:2016
*
ISO/IEC
29169:2016
*
ISO/IEC 301001:2016
*
ISO/IEC 301002:2016
*
ISO/IEC 301003:2016
*
ISO/IEC
27039:2015
*
ISO/IEC 230018:2016
*
ISO/IEC
29177:2016
*
ISO/IEC TR
15440:2016
*
Information technology — Universal Coded Character Set (UCS) — Amendment 2: Bhaiksuki,
Marchen, Tangut and other characters
H
Information technology — Ubiquitous green community control network — Control and management
F
Information technology — Ubiquitous green community control network — Security
C
Information technology — IT asset management — Part 3: Entitlement schema
G
Systems and software engineering — Life cycle management — Part 1: Guidelines for life
cycle management
G
Software and systems engineering — Tools and methods for product line requirements engineering
G
Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part
2-2: Guide for the development of domain-specific profiles
D
Information technology — Process assessment — Application of conformity assessment
methodology to the assessment to process quality characteristics and organizational maturity
C
Information technology — Home network resource management — Part 1: Requirements
D
Information technology — Home network resource management — Part 2: Architecture
H
Information technology — Home network resource management — Part 3: Management
application
E
Information technology — Security techniques — Selection, deployment and operations of
intrusion detection and prevention systems (IDPS)
F
Information technology — MPEG systems technologies — Part 8: Coding-independent code
points
F
Information technology — Automatic identification and data capture technique — Identifier
resolution protocol for multimedia information access triggered by tag-based identification
B
Information technology — Future keyboards and other input devices and entry methods
D
ISO/IEC 247791:2016
*
ISO/IEC 301081:2015
*
ISO/IEC TR
30125:2016
*
ISO/IEC 301342:2016
*
ISO/IEC 301343:2016
*
Information technology — Cross-jurisdictional and societal aspects of implementation of biometric technologies — Pictograms, icons and symbols for use with biometric systems — Part
1: General principles
Information technology — Biometric Identity Assurance Services — Part 1: BIAS services
G
Information technology — Biometrics used with mobile devices
E
Information technology — Data centres — Key performance indicators — Part 2: Power usage effectiveness (PUE)
D
Information technology — Data centres — Key performance indicators — Part 3: Renewable
energy factor (REF)
B
Standards confirmed
The following International Standards are confimred for a five year period:
TC 22
Road vehicles
ISO 27955:2010
ISO 29061-1:2010
TC 28
Petroleum products and related products of synthetic or biological origin
ISO 1998-6:2000
(reconfirmed)
ISO 1998-99:2000
(reconfirmed)
ISO 4404-2:2010
ISO 20783-1:2011
ISO 20843:2011
TC 29
Small tools
ISO 8486-2:2007
(reconfirmed)
ISO 6753-2:1998
(reconfirmed)
ISO 8017:2007
(reconfirmed)
ISO 10071-2:2005
(reconfirmed)
ISO 28238:2010
TC 34
B
Food products
ISO 3976:2006
(reconfirmed)
ISO 9874:2006
(reconfirmed)
TC 35
Paints and varnishes
ISO/TR 15235:2001
ISO 16276-1:2007
(reconfirmed)
ISO 16276-2:2007
(reconfirmed)
ISO 29601:2011
TC 39
Machine tools
ISO 8956:1986
(reconfirmed)
TC 44
Welding and allied processes
ISO 2401:1972
(reconfirmed)
ISO/TR 17671-1:2002
TC 46
Information and documentation
ISO/TR 15489-2:2001
TC 54
Essential oils
ISO 3217:1974
(reconfirmed)
TC 61
Plastics
ISO 171:1980
(reconfirmed)
ISO 1183-3:1999
(reconfirmed)
ISO 1675:1985
(reconfirmed)
ISO 4581:1994
(reconfirmed)
ISO 7059:1982
(reconfirmed)
ISO 8112:1984
(reconfirmed)
ISO 8661:1988
(reconfirmed)
ISO 11337:2010
ISO 175:2010
ISO 4611:2010
ISO 29664:2010
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 21809-4:2009
TC 69
Applications of statistical methods
ISO 10725:2000
(reconfirmed)
ISO 11843-2:2000
(reconfirmed)
ISO 21748:2010
TC 79
Light metals and their alloys
ISO 2107:2007
(reconfirmed)
TC 92
Fire safety
ISO/TS 5660-3:2012
ISO 29473:2010
ISO 10295-1:2007
(reconfirmed)
TC 96
Cranes
ISO 7296-3:2006
(reconfirmed)
ISO 9942-3:1999
(reconfirmed)
TC 109
Oil and gas burners
ISO 22967:2010
ISO 22968:2010
TC 131
Fluid power systems
ISO 12151-6:2009
ISO 4413:2010
ISO 4414:2010
TC 135
Non-destructive testing
ISO/TR 25107:2006
ISO/TR 25108:2006
TC 136
Furniture
ISO 21015:2007
(reconfirmed)
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO 13950:2007
(reconfirmed)
ISO 14531-3:2010
TC 146
Air quality
ISO 16000-8:2007
(reconfirmed)
TC 150
Implants for surgery
ISO 21535:2007
(reconfirmed)
ISO 5836:1988
(reconfirmed)
ISO 5837-1:1985
(reconfirmed)
ISO 8615:1991
(reconfirmed)
TC 159
Ergonomics
ISO 9241-1:1997
(reconfirmed)
TC 163
Thermal performance and energy use in the built environment
ISO 15099:2003
(reconfirmed)
TC 164
Mechanical testing of metals
ISO 1143:2010
TC 170
Surgical instruments
ISO 7740:1985
(reconfirmed)
TC 173
Assistive products for persons with disability
ISO 11334-4:1999
(reconfirmed)
ISO 16021:2000
(reconfirmed)
TC 181
Safety of toys
ISO 8124-3:2010
TC 182
Geotechnics
ISO/TS 17892-10:2004
(reconfirmed)
ISO/TS 17892-11:2004
(reconfirmed)
ISO/TS 17892-12:2004
(reconfirmed)
TC 184
Automation systems and integration
ISO/TS 10303-1071:2005
(reconfirmed)
ISO/TS 10303-1074:2005
(reconfirmed)
ISO/TS 10303-1077:2005
(reconfirmed)
ISO/TS 10303-1080:2005
(reconfirmed)
ISO/TS 10303-1085:2005
(reconfirmed)
ISO/TS 10303-1091:2005
(reconfirmed)
ISO/TS 10303-1092:2005
(reconfirmed)
ISO/TS 10303-1099:2005
(reconfirmed)
ISO/TS 10303-1101:2005
(reconfirmed)
ISO/TS 10303-1102:2005
(reconfirmed)
ISO/TS 10303-1113:2006
(reconfirmed)
ISO/TS 10303-1143:2005
(reconfirmed)
ISO/TS 10303-1144:2005
(reconfirmed)
ISO/TS 10303-1145:2005
(reconfirmed)
ISO/TS 10303-1146:2005
(reconfirmed)
ISO/TS 10303-1151:2005
(reconfirmed)
ISO/TS 10303-1156:2005
(reconfirmed)
ISO/TS 10303-1157:2005
(reconfirmed)
ISO/TS 10303-1158:2005
(reconfirmed)
ISO/TS 10303-1159:2005
(reconfirmed)
ISO/TS 10303-1160:2005
(reconfirmed)
ISO/TS 10303-1161:2005
(reconfirmed)
ISO/TS 10303-1162:2005
(reconfirmed)
ISO/TS 10303-1163:2005
(reconfirmed)
ISO/TS 10303-1165:2005
(reconfirmed)
ISO/TS 10303-1166:2005
(reconfirmed)
ISO/TS 10303-1167:2005
(reconfirmed)
ISO/TS 10303-1168:2005
(reconfirmed)
ISO/TS 10303-1169:2005
(reconfirmed)
ISO/TS 10303-1170:2005
(reconfirmed)
ISO/TS 10303-1171:2005
(reconfirmed)
ISO/TS 10303-1172:2005
(reconfirmed)
ISO/TS 10303-1173:2005
(reconfirmed)
ISO/TS 10303-1174:2005
(reconfirmed)
ISO/TS 10303-1175:2005
(reconfirmed)
ISO/TS 10303-1176:2005
(reconfirmed)
ISO/TS 10303-1177:2005
(reconfirmed)
ISO/TS 10303-1178:2005
(reconfirmed)
ISO/TS 10303-1179:2005
(reconfirmed)
ISO/TS 10303-1188:2005
(reconfirmed)
ISO/TS 10303-1198:2005
(reconfirmed)
ISO/TS 10303-1199:2005
(reconfirmed)
ISO/TS 10303-1203:2005
(reconfirmed)
ISO/TS 10303-1204:2005
(reconfirmed)
ISO/TS 10303-1205:2005
(reconfirmed)
ISO/TS 10303-1207:2005
(reconfirmed)
ISO/TS 10303-1208:2005
(reconfirmed)
ISO/TS 10303-1209:2005
(reconfirmed)
ISO/TS 10303-1211:2005
(reconfirmed)
ISO/TS 10303-1212:2005
(reconfirmed)
ISO/TS 10303-1213:2005
(reconfirmed)
ISO/TS 10303-1215:2008
(reconfirmed)
ISO/TS 10303-1216:2008
(reconfirmed)
ISO/TS 10303-1230:2005
(reconfirmed)
ISO/TS 10303-1242:2004
(reconfirmed)
ISO/TS 10303-1291:2008
(reconfirmed)
ISO/TS 10303-1313:2008
(reconfirmed)
ISO/TS 10303-1314:2008
(reconfirmed)
ISO/TS 10303-1318:2008
(reconfirmed)
ISO/TS 10303-1321:2008
(reconfirmed)
ISO/TS 10303-1322:2008
(reconfirmed)
ISO/TS 10303-1324:2008
(reconfirmed)
ISO/TS 10303-1329:2008
(reconfirmed)
ISO/TS 10303-1330:2008
(reconfirmed)
ISO/TS 10303-1331:2008
(reconfirmed)
ISO/TS 10303-1347:2005
(reconfirmed)
ISO/TS 10303-1352:2006
(reconfirmed)
ISO/TS 10303-1353:2006
(reconfirmed)
ISO/TS 10303-1354:2006
(reconfirmed)
ISO/TS 10303-1355:2006
(reconfirmed)
ISO/TS 10303-1366:2008
(reconfirmed)
ISO/TS 10303-1369:2008
(reconfirmed)
ISO/TS 10303-1602:2006
(reconfirmed)
ISO/TS 10303-1604:2006
(reconfirmed)
ISO/TS 10303-1605:2006
(reconfirmed)
ISO/TS 10303-1606:2006
(reconfirmed)
ISO/TS 10303-1607:2006
(reconfirmed)
ISO/TS 10303-1608:2006
(reconfirmed)
ISO/TS 10303-1609:2006
(reconfirmed)
ISO/TS 10303-1610:2006
(reconfirmed)
ISO/TS 10303-1611:2006
(reconfirmed)
ISO/TS 10303-1612:2006
(reconfirmed)
ISO/TS 10303-1614:2006
(reconfirmed)
ISO/TS 10303-1615:2006
(reconfirmed)
ISO/TS 10303-1616:2006
(reconfirmed)
ISO/TS 10303-1617:2006
(reconfirmed)
ISO/TS 10303-1618:2006
(reconfirmed)
ISO/TS 10303-1619:2006
(reconfirmed)
ISO/TS 10303-1620:2006
(reconfirmed)
ISO/TS 10303-1621:2006
(reconfirmed)
ISO/TS 10303-1622:2006
(reconfirmed)
ISO/TS 10303-1623:2006
(reconfirmed)
ISO/TS 10303-1624:2006
(reconfirmed)
ISO/TS 10303-1625:2006
(reconfirmed)
ISO/TS 10303-1626:2006
(reconfirmed)
ISO/TS 10303-1627:2006
(reconfirmed)
ISO/TS 10303-1630:2006
(reconfirmed)
ISO/TS 10303-1658:2006
(reconfirmed)
ISO/TS 10303-1659:2006
(reconfirmed)
ISO/TS 10303-1661:2006
(reconfirmed)
ISO/TS 10303-1665:2006
(reconfirmed)
ISO/TS 10303-1673:2006
(reconfirmed)
ISO/TS 10303-1675:2006
(reconfirmed)
ISO/TS 10303-1677:2006
(reconfirmed)
ISO/TS 10303-1678:2006
(reconfirmed)
ISO/TS 10303-1680:2006
(reconfirmed)
ISO/TS 10303-1715:2008
(reconfirmed)
ISO/TS 10303-1738:2006
(reconfirmed)
ISO/TS 10303-1745:2006
(reconfirmed)
ISO/TS 10303-1757:2006
(reconfirmed)
ISO/TS 10303-1759:2006
(reconfirmed)
ISO/TS 10303-1762:2008
(reconfirmed)
ISO/TS 10303-1775:2008
(reconfirmed)
ISO/TS 10303-1777:2008
(reconfirmed)
ISO/TS 10303-1780:2008
(reconfirmed)
ISO 13584-32:2010
ISO 13584-42:2010
ISO 15531-44:2010
ISO/TS 15926-4:2007
(reconfirmed)
ISO 22745-13:2010
TC 194
Biological and clinical evaluation of medical devices
ISO 10993-10:2010
ISO/TR 22442-4:2010
TC 207
Environmental management
ISO 14020:2000
(reconfirmed)
TC 212
Clinical laboratory testing and in vitro diagnostic test systems
ISO/TS 22367:2008
(reconfirmed)
TC 215
Health informatics
ISO/IEEE 1107310407:2010
TC 219
Floor coverings
ISO 1957:2000
(reconfirmed)
ISO 10595:2010
ISO 11378-1:2000
(reconfirmed)
ISO 13750:2000
(reconfirmed)
TC 229
Nanotechnologies
ISO 10801:2010
ISO 10808:2010
ISO/TS 11931:2012
ISO/TS 11937:2012
ISO/TS 12025:2012
ISO/TS 12901-1:2012
ISO/TS 14101:2012
ISO 29701:2010
JTC 1
Information technology
ISO/IEC 1539-1:2010
Standards withdrawn
Period from 01 April to 30 April 2016
TC 34
Food products
ISO 8968-5:2001
(replaced by ISO 8968-4:2016)
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO 14828:2003/Amd 1:2010
(replaced by )
JTC 1
Information technology
ISO/IEC TR 24748-1:2010
(replaced by ISO/IEC TS 24748-1:2016)
ISO/IEC 15459-8:2009
(replaced by )
Meeting calendar
(update at 01 April 2016)
Meetings called for the month of March are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
May 2016
2-6
Sydney (Australia)
PC 277
Sustainable procurement
2-6
Amsterdam (Netherlands)
TC 215
Health informatics
3-5
Dubaï (United Arab
Emirates)
CASCO
Committee on conformity assessment
5-6
Milan (Italy)
TC 67/SC 4
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and production equipment
5-6
Laramie (USA)
TC 265
Carbon dioxide capture, transportation, and geological storage
6-13
Berlin (Germany)
TC 10
Technical product documentation
7
Berlin (Germany)
TC 10/SC 10
Technical product documentation/Process plant documentation
9-11
Paris (France)
TC 34/SC 9
Food products/Microbiology
9-13
Stuttgart (Germany)
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
9-13
Wellington (New
Zealand)
TC 46
Information and documentation
9-13
Wellington (New
Zealand)
TC 46/SC 4
Information and documentation/Technical interoperability
9-13
Wellington (New
Zealand)
TC 46/SC 8
Information and documentation/Quality - Statistics and performance evaluation
9-13
Wellington (New
Zealand)
TC 46/SC 9
Information and documentation/Identification and description
9-13
Wellington (New
Zealand)
TC 46/SC 11
Information and documentation/Archives/records management
9-13
Washington, D.C
(USA)
TC 276
Biotechnology
10
Berlin (Germany)
TC 10/SC 6
Technical product documentation/Mechanical engineering documentation
10
Virtual (Unknown)
TC 67/SC 9
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Liquefied natural gas installations and equipment
10
Seoul (Korea, Republic of)
TC 122/SC 3
Packaging/Performance requirements and tests for means of packaging, packages
and unit loads (as required by ISO/TC 122)
10-12
Barcelona (Spain)
TC 147/SC 3
Water quality/Radioactivity measurements
11
Berlin (Germany)
TC 10/SC 8
Technical product documentation/Construction documentation
11
Virtual (Unknown)
TC 44/SC 12
Welding and allied processes/Soldering materials
11
Santa María de Lamas (Portugal)
TC 87
Cork
11
Seoul (Korea, Republic of)
TC 122
Packaging
12
Berlin (Germany)
TC 10/SC 1
Technical product documentation/Basic conventions
13
Shanghai (China)
TC 149/SC 1
Cycles/Cycles and major sub-assemblies
16-20
Suzhou (China)
JTC 1/SC 40
Information technology/IT Service Management and IT Governance
16-20
Chicago (USA)
TC 121
Anaesthetic and respiratory equipment
16-20
Chicago (USA)
TC 121/SC 3
Anaesthetic and respiratory equipment/Lung ventilators and related equipment
16-20
Chicago (USA)
TC 121/SC 6
Anaesthetic and respiratory equipment/Medical gas systems
17-19
Chicago (USA)
TC 121/SC 2
Anaesthetic and respiratory equipment/Airways and related equipment
17-19
Cancun (Mexico)
TC 289
Brand evaluation
17-20
Yokohama (Japan)
TC 22/SC 39
Road vehicles/Ergonomics
17-20
Montpellier (France)
TC 23/SC 18
Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment
and systems
18
Essen (Germany)
TC 44/SC 11
Welding and allied processes/Qualification requirements for welding and allied processes personnel
18
Chicago (USA)
TC 121/SC 1
Anaesthetic and respiratory equipment/Breathing attachments and anaesthetic machines
19
Yokohama (Japan)
TC 22/SC 35
Road vehicles/Lighting and visibility
19-20
Essen (Germany)
TC 44/SC 10
Welding and allied processes/Quality management in the field of welding
19-20
Tokyo (Japan)
TC 184/SC 5
Automation systems and integration/Interoperability, integration, and architectures for
enterprise systems and automation applications
20
Ghent (Belgium)
TC 171/SC 1
Document management applications/Quality
20
Ghent (Belgium)
TC 171/SC 2
Document management applications/Application issues
21
Atlanta (USA)
TC 86
Refrigeration and air-conditioning
22-27
Sapporo (Japan)
TC 184/SC 4
Automation systems and integration/Industrial data
23-24
Duisburg (Germany)
TC 34/SC 4
Food products/Cereals and pulses
23-25
Rome (Italy)
TC 145
Graphical symbols
23-27
Suzhou (China)
JTC 1/SC 7
Information technology/Software and systems engineering
23-27
Beijing (China)
TC 20/SC 14
Aircraft and space vehicles/Space systems and operations
23-27
Berlin (Germany)
TC 130
Graphic technology
24
Madrid (Spain)
TC 5/SC 5
Ferrous metal pipes and metallic fittings/Threaded fittings, solder fittings, welding
fittings, pipe threads, thread gauges
24
Rome (Italy)
TC 145/SC 2
Graphical symbols/Safety identification, signs, shapes, symbols and colours
24
Rome (Italy)
TC 145/SC 3
Graphical symbols/Graphical symbols for use on equipment
24-26
Reykjavik (Iceland)
TC 8/SC 1
Ships and marine technology/Lifesaving and fire protection
24-27
Tokyo (Japan)
TC 35
Paints and varnishes
25
Ghent (Belgium)
TC 115
Pumps
26
New York (USA)
TC 67/SC 5
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe
26-27
(Malaysia)
TC 228
Tourism and related services
27
Rome (Italy)
TC 22/SC 38
Road vehicles/Motorcycles and mopeds
TC 34/SC 5
Food products/Milk and milk products
TC 102
Iron ore and direct reduced iron
May-June 2016
30-3
Copenhagen (Denmark)
30-2
Lulea (Sweden)
31-2
Lulea (Sweden)
TC 102/SC 1
Iron ore and direct reduced iron/Sampling
31-2
Lulea (Sweden)
TC 102/SC 2
Iron ore and direct reduced iron/Chemical analysis
*
*
31-2
Lulea (Sweden)
TC 102/SC 3
Iron ore and direct reduced iron/Physical testing
TC 8/SC 11
Ships and marine technology/Intermodal and Short Sea Shipping
TC 267
Facilities management
June 2016
1
Atlanta (USA)
2-4
Victoria (Australia)
4
Geneva (Switzerland)
JTC 1/SC 29
Information technology/Coding of audio, picture, multimedia and hypermedia information
6-7
Heerbrugg (Switzerland)
TC 172/SC 6
Optics and photonics/Geodetic and surveying instruments
6-8
Paris (France)
TC 220
Cryogenic vessels
6-10
Hokaido (Japan)
JTC 1/SC 31
Information technology/Automatic identification and data capture techniques
6-10
London (United
Kingdom)
TC 69/SC 1
Applications of statistical methods/Terminology and symbols
6-10
London (United
Kingdom)
TC 69/SC 4
Applications of statistical methods/Applications of statistical methods in product and
process management
6-10
London (United
Kingdom)
TC 69/SC 5
Applications of statistical methods/Acceptance sampling
6-10
London (United
Kingdom)
TC 69/SC 6
Applications of statistical methods/Measurement methods and results
6-10
London (United
Kingdom)
TC 69/SC 7
Applications of statistical methods/Applications of statistical and related techniques
for the implementation of Six Sigma
6-10
London (United
Kingdom)
TC 69/SC 8
Applications of statistical methods/Application of statistical and related methodology
for new technology and product development
7
Winterthur (Switzerland)
TC 5/SC 11
Ferrous metal pipes and metallic fittings/Metal hoses and expansion joints
7-9
Turin (Italy)
TC 274
Light and lighting
7-10
Prague (Czech Republic)
TC 156
Corrosion of metals and alloys
9
Aachen (Germany)
TC 44/SC 13
Welding and allied processes/Brazing materials and processes
9-10
Seattle (USA)
TC 214
Elevating work platforms
9-16
Portland, Oregon
(USA)
JTC 1/SC 28
Information technology/Office equipment
10
Milan (Italy)
TC 17/SC 19
Steel/Technical delivery conditions for steel tubes for pressure purposes
10
London (United
Kingdom)
TC 69
Applications of statistical methods
13
Memphis (USA)
JTC 1/SC 32
Information technology/Data management and interchange
13
Geneva (Switzerland)
President's committee
President's committee
13
Stockholm (Sweden)
TC 242
Energy Management
13
Stockholm (Sweden)
TC 301
Energy management and energy saving
13-17
Kyoto (Japan)
TC 282/SC 1
Water reuse/Treated wastewater reuse for Irrigation
13-17
Kyoto (Japan)
TC 282/SC 2
Water reuse/Water reuse in urban areas
13-17
Kyoto (Japan)
TC 282/SC 3
Water reuse/Risk and performance evaluation of water reuse systems
*
*
*
*
14-17
Ekaterinburg (Russian Federation)
REMCO
Committee on reference materials
15-16
Geneva (Switzerland)
TMB
Technical Management Board
15-17
Berlin (Germany)
TC 44/SC 14
Welding and allied processes/Welding and brazing in aerospace
16
Virtual (Unknown)
CSC/SPC
Council/Strategy and Policy Committee (CSC/SPC)
16-17
Geneva (Switzerland)
COPOLCO
Committee on consumer policy
16-17
Tromsø (Norway)
TC 211
Geographic information/Geomatics
18
Munich (Germany)
TC 135/SC 4
Non-destructive testing/Eddy current methods
18
Munich (Germany)
TC 135/SC 8
Non-destructive testing/Infrared thermography for non-destructive testing
19
Munich (Germany)
TC 135/SC 2
Non-destructive testing/Surface methods
19
Munich (Germany)
TC 135/SC 3
Non-destructive testing/Ultrasonic testing
19
Munich (Germany)
TC 135/SC 5
Non-destructive testing/Radiation methods
19
Munich (Germany)
TC 135/SC 6
Non-destructive testing/Leak detection methods
20
Munich (Germany)
TC 135
Non-destructive testing
20
Munich (Germany)
TC 135/SC 7
Non-destructive testing/Personnel qualification
20
Munich (Germany)
TC 135/SC 9
Non-destructive testing/Acoustic emission testing
20-21
Berlin (Germany)
TC 22/SC 32
Road vehicles/Electrical and electronic components and general system aspects
20-23
Delft (Netherlands)
TC 272
Forensic sciences
20-24
Frankfurt (Germany)
JTC 1/SC 39
Information technology/Sustainability for and by Information Technology
20-24
Teddington (United
Kingdom)
TC 43/SC 3
Acoustics/Underwater acoustics
20-25
Prague (Czech Republic)
JTC 1/SC 36
Information technology/Information technology for learning, education and training
21
Istanbul (Turkey)
TC 120
Leather
21
Istanbul (Turkey)
TC 120/SC 3
Leather/Leather products
21-22
Düsseldorf (Germany)
TC 17/SC 10
Steel/Steel for pressure purposes
21-22
Berlin (Germany)
TC 188/SC 1
Small craft/Personal safety equipment
22
Istanbul (Turkey)
TC 120/SC 1
Leather/Raw hides and skins, including pickled pelts
22-23
Porto (Portugal)
TC 17/SC 17
Steel/Steel wire rod and wire products
22-23
Porto (Portugal)
TC 269
Railway applications
23
Schonach (Germany)
TC 29/SC 10
Small tools/Assembly tools for screws and nuts, pliers and nippers
23
Istanbul (Turkey)
TC 120/SC 2
Leather/Tanned leather
24
Porto (Portugal)
TC 17/SC 15
Steel/Railway rails, rails fasteners, wheels and wheelsets
24
Tokyo (Japan)
TC 22/SC 41
Road vehicles/Specific aspects for gaseous fuels
27
Nicosia (Cyprus)
TC 193
Natural gas
*
*
*
*
27-28
Frankfurt (Germany)
TC 184
Automation systems and integration
29
London (United
Kingdom)
TC 107/SC 4
Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)
29-30
Beijing (China)
TC 20/SC 16
Aircraft and space vehicles/Unmanned aircraft systems
30
Geneva (Switzerland)
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
30
Saskatoon (Canada)
TC 159/SC 1
Ergonomics/General ergonomics principles
*
June-July 2016
25-1
Copenhagen (Denmark)
TC 37
Terminology and other language and content resources
27-1
London (United
Kingdom)
TC 188
Small craft
27-1
Nicosia (Cyprus)
*
TC 193/SC 1
Natural gas/Analysis of natural gas
27-1
Nicosia (Cyprus)
*
TC 193/SC 3
Natural gas/Upstream area
27-1
Hangzhou (China)
TC 268
Sustainable development in communities
27-1
Hangzhou (China)
*
*
TC 268/SC 1
Sustainable development in communities/Smart community infrastructures
*
*
TC 34/SC 7
Food products/Spices, culinary herbs and condiments
1st Semester 2016
New Delhi (India)
July 2016
5-8
Shanghai (China)
TC 8/SC 8
Ships and marine technology/Ship design
7-8
Paris (France)
TC 34
Food products
14
Tokyo (Japan)
TC 261
Additive manufacturing
15
Greenville (USA)
*
*
TC 94/SC 14
Personal safety -- Protective clothing and equipment/Fire-fighters' personal equipment
26-27
Sydney (Australia)
*
TC 281
Fine Bubble Technology
29
Bologna (Italy)
TC 23/SC 7
Tractors and machinery for agriculture and forestry/Equipment for harvesting and
conservation
JTC 1/SC 35
Information technology/User interfaces
TC 206
Fine ceramics
August 2016
1-5
Seoul (Korea, Republic of)
*
19
Berlin (Germany)
22-26
Beijing (China)
*
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data
representation
24
Virtual (Unknown)
*
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
25
Stockholm (Sweden)
TC 12
Quantities and units
31
Stockholm (Sweden)
*
TC 6/SC 2
Paper, board and pulps/Test methods and quality specifications for paper and board
(USA)
*
*
TC 91
Surface active agents
TC 207
Environmental management
August-September 2016
29-3
Seoul (Korea, Republic of)
September 2016
1
Stockholm (Sweden)
TC 6
Paper, board and pulps
5-9
Bilbao (Spain)
*
TC 108/SC 4
Mechanical vibration, shock and condition monitoring/Human exposure to mechanical
vibration and shock
5-10
Changsha (China)
*
TC 96/SC 6
Cranes/Mobile cranes
5-10
Sydney (Australia)
*
TC 147
Water quality
6
Xian (China)
*
TC 263
Coalbed methane (CBM)
9
Beijing (China)
President's committee
President's committee
10
Beijing (China)
TMB
Technical Management Board
10-16
San José, California
(USA)
*
TC 130
Graphic technology
11
Beijing (China)
*
COUNCIL
Council
11
Beijing (China)
DEVCO
Committee on developing country matters
11-16
Tromsø (Norway)
*
TC 106/SC 1
Dentistry/Filling and restorative materials
11-16
Tromsø (Norway)
*
TC 106/SC 2
Dentistry/Prosthodontic materials
11-16
Tromsø (Norway)
*
TC 106/SC 3
Dentistry/Terminology
11-16
Tromsø (Norway)
*
TC 106/SC 4
Dentistry/Dental instruments
11-16
Tromsø (Norway)
*
TC 106/SC 6
Dentistry/Dental equipment
11-16
Tromsø (Norway)
*
*
TC 106/SC 7
Dentistry/Oral care products
11-16
Tromsø (Norway)
*
TC 106/SC 8
Dentistry/Dental implants
11-16
Tromsø (Norway)
*
TC 106/SC 9
Dentistry/Dental CAD/CAM systems
12-13
Beijing (China)
*
GA
General Assembly
12-13
Peterborough (United
Kingdom)
*
TC 23/SC 13
Tractors and machinery for agriculture and forestry/Powered lawn and garden equipment
12-13
Stavanger (Norway)
*
TC 67/SC 7
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Offshore structures
13
Beijing (China)
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
13
Beijing (China)
*
*
CSC/SPC
Council/Strategy and Policy Committee (CSC/SPC)
14-16
Peterborough (United
Kingdom)
*
TC 23/SC 17
Tractors and machinery for agriculture and forestry/Manually portable forest machinery
17-21
Amman (Jordan)
*
TC 262
Risk management
19-20
Xian (China)
TC 33
Refractories
19-22
Atlanta (USA)
*
TC 142
Cleaning equipment for air and other gases
19-23
Berlin (Germany)
*
*
TC 61
Plastics
19-23
Sydney (Australia)
*
TC 150
Implants for surgery
19-25
Melbourne (Australia)
*
TC 165
Timber structures
20-21
Seoul (Korea, Republic of)
*
TC 221
Geosynthetics
20-22
Yichang (China)
*
*
TC 256
Pigments, dyestuffs and extenders
20-22
Stockholm (Sweden)
*
*
TC 264
Fireworks
22-24
Beijing (China)
*
TC 17/SC 1
Steel/Methods of determination of chemical composition
23
Barcelona (Spain)
*
TC 254
Safety of amusement rides and amusement devices
26-30
San José, California
(USA)
*
JTC 1/SC 2
Information technology/Coded character sets
26-30
Seoul (Korea, Republic of)
*
*
JTC 1/SC 34
Information technology/Document description and processing languages
26-30
Beijing (China)
TC 8
Ships and marine technology
26-30
Burlington, Vermont
(USA)
*
*
TC 146/SC 3
Air quality/Ambient atmospheres
26-30
Burlington, Vermont
(USA)
*
*
TC 146/SC 6
Air quality/Indoor air
26-30
Berlin (Germany)
*
*
TC 163
Thermal performance and energy use in the built environment
26-30
Berlin (Germany)
*
*
TC 205
Building environment design
26-30
(Canada)
*
*
TC 218
Timber
27-29
Moscow (Russian
Federation)
*
TC 232
Learning services outside formal education
28
Delft (Netherlands)
*
TC 28/SC 5
Petroleum products and related products of synthetic or biological
origin/Measurement of refrigerated hydrocarbon and non-petroleum based liquefied
gaseous fuels
28-29
Delft (Netherlands)
*
TC 28/SC 2
Petroleum products and related products of synthetic or biological
origin/Measurement of petroleum and related products
28-30
Berlin (Germany)
TC 44/SC 3
Welding and allied processes/Welding consumables
29
Delft (Netherlands)
*
TC 28/SC 4
Petroleum products and related products of synthetic or biological
origin/Classifications and specifications
29
Delft (Netherlands)
*
TC 28/SC 7
Petroleum products and related products of synthetic or biological origin/Liquid Biofuels
29-30
Courbevoie, Paris
(France)
TC 17
Steel
30
Delft (Netherlands)
TC 28
Petroleum products and related products of synthetic or biological origin
30
Milan (Italy)
*
*
TC 39/SC 4
Machine tools/Woodworking machines
30
Burlington, Vermont
(USA)
*
*
TC 146/SC 1
Air quality/Stationary source emissions
Vienna (Austria)
*
*
JTC 1/SC 22
Information technology/Programming languages, their environments and system
software interfaces
(Asia)
*
*
TC 31/SC 9
Tyres, rims and valves/Valves for tube and tubeless tyres
Burlington, Vermont
(USA)
*
*
TC 146/SC 2
Air quality/Workplace atmospheres
Sao Paulo (Brazil)
*
*
TC 173
Assistive products for persons with disability
Sao Paulo (Brazil)
*
*
TC 173/SC 1
Assistive products for persons with disability/Wheelchairs
Sao Paulo (Brazil)
*
*
TC 209
Cleanrooms and associated controlled environments
Shanghai (China)
*
*
TC 213
Dimensional and geometrical product specifications and verification
Singapore (Singapore)
*
*
TC 260
Human resource management
(Turkey)
*
*
TC 34/SC 3
Food products/Fruits and vegetables and their derived products
Seoul (Korea, Republic of)
*
*
TC 92/SC 1
Fire safety/Fire initiation and growth
3rd Quarter 2016
October 2016
2-7
Seattle (USA)
*
TC 184/SC 4
Automation systems and integration/Industrial data
2-7
Auckland (New Zealand)
*
TC 204
Intelligent transport systems
3-7
Pretoria (South Africa)
*
PC 273
Customer contact centres
4-7
London (United
Kingdom)
*
TC 22/SC 34
Road vehicles/Propulsion, powertrain and powertrain fluids
5
London (United
Kingdom)
TC 70/SC 7
Internal combustion engines/Tests for lubricating oil filters
5-6
Paris (France)
*
*
TC 79/SC 2
Light metals and their alloys/Organic and anodic oxidation coatings on aluminium
5-7
Madrid (Spain)
*
TC 225
Market, opinion and social research
5-10
Berlin (Germany)
TC 59/SC 17
Buildings and civil engineering works/Sustainability in buildings and civil engineering
works
6
Virtual (Unknown)
*
President's committee
President's committee
6
(Unknown)
*
*
TC 67/SC 9
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Liquefied natural gas installations and equipment
6
Berlin (Germany)
TC 119/SC 3
Powder metallurgy/Sampling and testing methods for sintered metal materials (excluding hardmetals)
6
Matsue (Japan)
TC 183
Copper, lead, zinc and nickel ores and concentrates
6-7
Berlin (Germany)
TC 119
Powder metallurgy
7
Berlin (Germany)
TC 119/SC 4
Powder metallurgy/Sampling and testing methods for hardmetals
8
New Orleans (USA)
*
TC 38
Textiles
10-13
Bucarest (Romania)
*
TC 172/SC 1
Optics and photonics/Fundamental standards
10-14
Hoffman Estates,
Illinois (USA)
*
TC 58/SC 2
Gas cylinders/Cylinder fittings
10-14
Tokyo (Japan)
*
*
TC 153
Valves
11-12
Beijing (China)
*
TC 298
Rare earth
12-13
Hangzhou (China)
*
TC 70/SC 8
Internal combustion engines/Exhaust gas emission measurement
*
*
14
Hangzhou (China)
*
TC 70
Internal combustion engines
17-21
Berlin (Germany)
*
*
JTC 1/SC 38
Information technology/Cloud Computing and Distributed Platforms
17-21
(China)
*
*
TC 5/SC 2
Ferrous metal pipes and metallic fittings/Cast iron pipes, fittings and their joints
17-21
(China)
*
*
TC 5/SC 10
Ferrous metal pipes and metallic fittings/Metallic flanges and their joints
17-21
Moscow (Russian
Federation)
*
TC 20
Aircraft and space vehicles
17-21
London (United
Kingdom)
*
TC 58/SC 3
Gas cylinders/Cylinder design
17-21
Kyoto (Japan)
*
TC 138
Plastics pipes, fittings and valves for the transport of fluids
17-21
Berlin (Germany)
*
TC 181
Safety of toys
18
Shanghai (China)
*
TC 2/SC 14
Fasteners/Surface coatings
18-19
Tokyo (Japan)
*
TC 17/SC 17
Steel/Steel wire rod and wire products
19
Shanghai (China)
*
TC 2/SC 7
Fasteners/Reference standards
19-21
Philadelphia (USA)
*
*
TC 202
Microbeam analysis
20
Shanghai (China)
*
TC 2/SC 12
Fasteners/Fasteners with metric internal thread
20-21
Tokyo (Japan)
TC 17/SC 16
Steel/Steels for the reinforcement and prestressing of concrete
20-21
London (United
Kingdom)
*
TC 58
Gas cylinders
20-21
Vienna (Austria)
*
TC 227
Springs
21
Shanghai (China)
*
TC 2/SC 11
Fasteners/Fasteners with metric external thread
21
(China)
*
*
TC 5
Ferrous metal pipes and metallic fittings
22-23
Orlando (USA)
TC 24/SC 4
Particle characterization including sieving/Particle characterization
24
Tokyo (Japan)
*
TC 79/SC 9
Light metals and their alloys/Symbolization
24-26
Tokyo (Japan)
*
*
TC 79/SC 11
Light metals and their alloys/Titanium
24-28
Tokyo (Japan)
*
*
TC 79
Light metals and their alloys
24-28
Tokyo (Japan)
*
*
TC 164
Mechanical testing of metals
24-28
Sydney (Australia)
*
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
24-28
Saint-Denis (France)
*
TC 190/SC 4
Soil quality/Biological methods
24-28
Athens (Greece)
*
TC 258
Project, programme and portfolio management
25
(Unknown)
*
*
TC 34/SC 9
Food products/Microbiology
25
Tokyo (Japan)
*
TC 79/SC 4
Light metals and their alloys/Unalloyed (refined) aluminium ingots
25
Tokyo (Japan)
TC 79/SC 6
Light metals and their alloys/Wrought aluminium and aluminium alloys
26-27
Osaka (Japan)
*
TC 126
Tobacco and tobacco products
26-28
(United Kingdom)
*
*
TC 123
Plain bearings
26-28
Tokyo (Japan)
*
TC 172/SC 5
Optics and photonics/Microscopes and endoscopes
27
Tokyo (Japan)
*
TC 79/SC 5
Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium
27-28
Orlando (USA)
*
*
TC 17/SC 12
Steel/Continuous mill flat rolled products
Berlin (Germany)
*
*
TC 59
Buildings and civil engineering works
(Greece)
*
*
TC 180
Solar energy
(Korea, Republic of)
*
*
TC 201
Surface chemical analysis
October-November 2016
30-4
Kuala Lumpur (Malaysia)
*
*
TC 45
Rubber and rubber products
31-4
Seoul (Korea, Republic of)
*
TC 23/SC 6
Tractors and machinery for agriculture and forestry/Equipment for crop protection
November 2016
1-4
Arlington (USA)
*
*
TC 22/SC 36
Road vehicles/Safety and impact testing
4
Mainz (Germany)
*
TC 291
Domestic gas cooking appliances
7-8
Seoul (Korea, Republic of)
*
TC 159/SC 4
Ergonomics/Ergonomics of human-system interaction
7-8
London (United
Kingdom)
*
TC 241
Road traffic safety management systems
7-11
Sydney (Australia)
*
TC 98
Bases for design of structures
7-12
Lillehammer (Norway)
*
*
JTC 1
Information technology
8-10
Kobe (Japan)
*
TC 212
Clinical laboratory testing and in vitro diagnostic test systems
10-11
Bern (Switzerland)
*
TC 34/SC 12
Food products/Sensory analysis
13-17
(Norway)
*
*
TC 215
Health informatics
14-18
Toronto (Canada)
*
TC 44
Welding and allied processes
16
Toronto (Canada)
*
TC 46/SC 9
Information and documentation/Identification and description
17
Hiroshima City (Japan)
*
TC 244
Industrial furnaces and associated processing equipment
17-18
Orlando (USA)
*
TC 299
Robotics
24-25
London (United
Kingdom)
*
TC 281
Fine Bubble Technology
Christchurch (New
Zealand)
*
*
TC 20/SC 1
Aircraft and space vehicles/Aerospace electrical requirements
(China)
*
*
TC 134
Fertilizers and soil conditioners
Tel Aviv (Israel)
*
*
TC 282
Water reuse
Tel Aviv (Israel)
*
*
TC 282/SC 1
Water reuse/Treated wastewater reuse for Irrigation
Tel Aviv (Israel)
*
TC 282/SC 2
Water reuse/Water reuse in urban areas
*
Tel Aviv (Israel)
*
*
TC 282/SC 3
Water reuse/Risk and performance evaluation of water reuse systems
December 2016
1-2
Sapporo (Japan)
*
TC 265
Carbon dioxide capture, transportation, and geological storage
5-9
Sydney (Australia)
*
TC 217
Cosmetics
8-9
Petten (Netherlands)
TC 197
Hydrogen technologies
9
Berlin (Germany)
*
TC 44/SC 6
Welding and allied processes/Resistance welding and allied mechanical joining
*
*
TC 113
Hydrometry
(Europe)
*
*
TC 31/SC 5
Tyres, rims and valves/Agricultural tyres and rims
(Europe)
*
*
TC 31/SC 6
Tyres, rims and valves/Off-the-road tyres and rims
(Europe)
*
*
TC 31/SC 7
Tyres, rims and valves/Industrial tyres and rims
Florence (Italy)
*
*
TC 160
Glass in building
Florence (Italy)
*
*
TC 160/SC 1
Glass in building/Product considerations
Florence (Italy)
*
*
TC 160/SC 2
Glass in building/Use considerations
*
*
JTC 1/SC 23
Information technology/Digitally Recorded Media for Information Interchange and
Storage
*
*
TC 107
Metallic and other inorganic coatings
4th Quarter 2016
(India)
2nd Semester 2016
Month unknown 2016
(Korea, Republic of)
January 2017
16-20
Tokyo (Japan)
February 2017
6-10
Berlin (Germany)
*
*
JTC 1/SC 35
Information technology/User interfaces
6-12
(South Africa)
*
*
TC 58/SC 4
Gas cylinders/Operational requirements for gas cylinders
22-23
Kuala Lumpur (Malaysia)
*
*
TMB
Technical Management Board
March 2017
6
Kyoto (Japan)
*
*
TC 60
Gears
16-17
Geneva (Switzerland)
*
*
COUNCIL
Council
*
*
JTC 1/SC 6
Information technology/Telecommunications and information exchange between systems
1st Quarter 2017
(Tunisia)
April 2017
10
Guilin (China)
*
*
TC 29/SC 8
Small tools/Tools for pressing and moulding
26
Milan (Italy)
*
TC 67/SC 2
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Pipeline transportation systems
(Unknown)
*
*
TC 34/SC 15
Food products/Coffee
(Côte-d'Ivoire)
*
*
TC 34/SC 18
Food products/Cocoa
(China)
*
*
TC 215
Health informatics
May 2017
8-12
Seoul (Korea, Republic of)
*
TC 161
Control and protective devices for gas and/or oil burners and appliances
15-18
(USA)
*
*
TC 85/SC 5
Nuclear energy, nuclear technologies, and radiological protection/Nuclear installations, processes & technologies
15-19
Washington, D.C
(USA)
*
TC 4
Rolling bearings
15-19
Seattle (USA)
*
TC 31
Tyres, rims and valves
15-19
Seattle (USA)
*
TC 31/SC 3
Tyres, rims and valves/Passenger car tyres and rims
15-19
Seattle (USA)
*
TC 31/SC 10
Tyres, rims and valves/Cycle, moped, motorcycle tyres and rims
(Sweden)
*
*
TC 29
Small tools
(Unknown)
*
*
TC 226
Materials for the production of primary aluminium
Geneva (Switzerland)
*
*
TMB
Technical Management Board
(Australia)
*
*
JTC 1/SC 36
Information technology/Information technology for learning, education and training
(USA)
*
*
TC 42
Photography
*
*
TC 92
Fire safety
Paris (France)
*
JTC 1/SC 35
Information technology/User interfaces
(Unknown)
*
*
JTC 1/SC 34
Information technology/Document description and processing languages
June 2017
14-15
2nd Quarter 2017
Tsukuba (Japan)
July 2017
24-28
September 2017
18
Berlin (Germany)
*
COUNCIL
Council
19
Berlin (Germany)
*
*
TMB
Technical Management Board
20-22
Berlin (Germany)
*
*
GA
General Assembly
25-29
(Unknown)
*
TC 58/SC 2
Gas cylinders/Cylinder fittings
*
(China)
*
*
JTC 1/SC 2
Information technology/Coded character sets
London (United
Kingdom)
*
*
JTC 1/SC 22
Information technology/Programming languages, their environments and system
software interfaces
(Japan)
*
*
TC 20/SC 1
Aircraft and space vehicles/Aerospace electrical requirements
Vienna (Austria)
*
*
TC 165
Timber structures
(Japan)
*
*
TC 213
Dimensional and geometrical product specifications and verification
(Nigeria)
*
*
TC 260
Human resource management
*
*
TC 289
Brand evaluation
3rd Quarter 2017
Vienna (Austria)
October 2017
2-7
Vladivostok (Russian
Federation)
*
JTC 1
Information technology
9-13
New Delhi (India)
*
*
TC 178
Lifts, escalators and moving walks
11
New Orleans (USA)
*
TC 38/SC 1
Textiles/Tests for coloured textiles and colorants
11
New Orleans (USA)
*
TC 38/SC 2
Textiles/Cleansing, finishing and water resistance tests
12
New Orleans (USA)
*
TC 38/SC 23
Textiles/Fibres and yarns
12
New Orleans (USA)
*
TC 38/SC 24
Textiles/Conditioning atmospheres and physical tests for textile fabrics
13
New Orleans (USA)
*
TC 38
Textiles
22-27
Hawaii (USA)
*
TC 45
Rubber and rubber products
(India)
*
*
TC 54
Essential oils
London (United
Kingdom)
*
*
TC 215
Health informatics
(North America)
*
*
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data
representation
Erlangen (Germany)
*
*
TC 36
Cinematography
(South Africa)
*
*
TC 46
Information and documentation
(South Africa)
*
*
TC 46/SC 11
Information and documentation/Archives/records management
(United Kingdom)
*
*
TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
(USA)
*
*
TC 198
Sterilization of health care products
Milan (Italy)
*
TC 206
Fine ceramics
November 2017
Month unknown 2017
*
February 2018
12-18
(Sweden)
*
*
TC 58/SC 4
Gas cylinders/Operational requirements for gas cylinders
*
*
JTC 1/SC 35
Information technology/User interfaces
*
*
JTC 1/SC 36
Information technology/Information technology for learning, education and training
*
*
TC 61
Plastics
(Japan)
*
*
JTC 1/SC 35
Information technology/User interfaces
(Netherlands)
*
*
TC 92
Fire safety
*
*
TC 215
Health informatics
(Europe)
*
*
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data
representation
(China)
*
*
TC 45
Rubber and rubber products
(USA)
*
*
TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
Milan (Italy)
*
*
TC 161
Control and protective devices for gas and/or oil burners and appliances
*
*
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data
representation
*
*
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data
representation
1st Quarter 2018
(Netherlands)
June 2018
(Korea, Republic of)
September 2018
(Japan)
3rd Quarter 2018
October 2018
(Malaysia)
Month unknown 2018
Month unknown 2019
(Asia)
Month unknown 2020
(North America)
Download