INDUSTRIAL TECHNOLOGY
Course Descriptions
CETT 1303: DC Circuits (3:2-2)
A study of the fundamental of direct current including Ohm’s Law, Kirchoff’s Laws and
circuit analysis techniques. Emphasis on circuit analysis of resistive networks and DC
measurements. $12 lab fee.
CETT 1305: AC Circuits (3:2-2)
A study of the fundamentals of alternating current including series and parallel AC
circuits, phasors, capacitive and inductive networks, transformers, and resonance. $12
lab fee.
CETT 1325: Digital Fundamentals (3:2-2)
An entry-level course in digital electronics covering number systems, binary
mathematics, digital codes, logic gates, Boolean algebra, Karnaugh maps, and
combinational logic. Emphasis on circuit logic analysis and troubleshooting digital
circuits. (Formerly ETTE 1303).
CETT 1329: Solid State Devices (3:2-2)
A study of diodes and bipolar semiconductor devices, including analysis of static and
dynamic characteristics, bi- techniques, and thermal considerations of solid state devices.
(Formerly ETTE 2303).
CETT 1341: Solid State Circuit (3:2-2)
A study of various semiconductor devices incorporated in circuits and their applications.
Emphasis on circuit construction, measurements, and analysis. Prerequisite: CETT
1329. (Formerly ETTE 2307).
CETT 1345: Microprocessor (3:2-2)
An introductory course in microprocessor software and hardware; its architecture, timing
sequence, operation, and programming; and discussion of appropriate software diagnostic
language and tools. (Formerly ETTE 2313).
CETT 1349: Digital Systems (3:2-2)
A study of devices, circuits, and systems primarily used in automated manufacturing
and/or process control including computer controls and interfacing between mechanical,
electrical, electronic, and computer equipment. Presentation of programming schemes.
Prerequisite: CETT 1325. $15 lab fee. (Formerly ETTE 1307).
CETT 2337: Microcomputer Control (3:2-2)
A study of microprocessors and microcomputers with an emphasis on embedded
controllers for industrial and commercial applications. Topics include RAM, ROM and
input/output (I/O) interfacing. Introduction to programming. $15 lab fee. (Formerly INTE
1301).
CPMT 1307: Electronic and Computer Skills (3:2-2)
The study of modern electronic construction techniques including the application of the
most common hand tools used in disassembly, repair, and re-assembly of electronics and
computer components. $12 lab fee. (Formerly ETTE 1401).
EECT 2439: Communication Circuits (4:2-4)
A study of communications systems with emphasis on amplitude modulation, frequency
modulation, phase modulation, and digital pulse modulation. Discussion of several types
of modulators, demodulators, receivers, transmitters, and transceivers. (Formerly ETTE
2309).
ELMT 1301: Basic Programmable Logic Controllers (3:2-2)
An introduction to programmable logic controllers as used in industrial environments
including basic concepts, programming, applications, troubleshooting of ladder logic, and
interfacing of equipment. $14 lab fee. (Formerly INTE 1305).
ELMT 1305: Basic Fluid Power (3:2-2)
Basic fluid power course including pneumatics, vacuum and hydraulics, symbols, theory,
components, and basic electrical controls. $15 lab fee. (Formerly INTE 1303).
ELMT 2335: Certified Electronics Technician Training (3:2-2)
Review of electronics concepts and principles in preparation for sitting for a certification
examination administered by an outside organization or agency.
ELMT 2341: Electromechanical Systems (3:2-2)
A study of devices and components that translate electrical energy into mechanical motion.
Emphasis on the semiconductor industry. Topics include DC and AC motors and controllers,
servomotors, stepping motors, solenoids, linear motors, and actuators. Introduction to
pneumatics principles, components, control systems, and mass flow controllers. Principles of
robotics, types of robots, and common applications. Programmable logic controllers and ladder
logic. Open and closed control principles. PID controllers. $15 lab fee. (Formerly INTE 1304).
ELMT 2433: Industrial Electronics (4:3-3)
A study of devices, circuits, and systems primarily used in automated manufacturing
and/or process control including computer controls and interfacing between mechanical,
electrical, electronic, and computer equipment. Presentation of programming schemes.
$12 lab fee. (Formerly MTTE 2319).
ENTC 1343: Statics (3:2-2)
A study of the composition and resolution of forces and the equilibrium of forces acting
on structures. Includes the concepts of friction, moments, couples, centroids, and moment
of inertia. $10 lab fee. (Formerly MTTE 2307).
ENTC 1349: Reliability & Maintainability (3:2-2)
A study of equipment reliability and maintainability to improve the efficiency of
operations including utilizing the latest equipment and techniques to implement effective
prevention and predictive maintenance programs. $12 lab fee. (Formerly INTE 2301).
ENTC 2331: Manufacturing Materials (3:2-2)
Identification of various materials used in manufacturing including metals, plastics,
composite materials, concrete, ceramics, and wood. Examination of the properties of
these materials and standards for quality measurement. $10 lab fee. (Formerly MTTE
1305).
INMT 1343: CAD-CAM (3:2-2)
Computer-Assisted applications in integrating engineering graphics and manufacturing.
Emphasis on the conversion of a working drawing using CAD-CAM software and related
input and output devices to translate into machine code. $10 lab fee. (Formerly MTTE
2311).
INMT 1345: Computer Numerical Controls (3:2-2)
A study of numerical controlled machine operations. Emphasis on standard and computer
numerical controlled procedures for planning, preparing, and operating a computerassisted program. $10 lab fee. (Formerly MTTE 2301).
INMT 1349: Manufacturing Processes (3:2-2)
Exploration of a variety of methods used in manufacturing. Theory and application of
processes including but not limited to metal forming, welding, machining, heat treating,
plating, assembly procedures, and process control considerations. $12 lab fee. (Formerly
MTTE 1301).
INMT 1380: Cooperative Education-Industrial/Manufacturing Technology (3:1-20)
Career related activities encountered in the student’s area of specialization are offered
through a cooperative agreement between the college, employer, and student. Under
supervision of the college and the employer, the student combines classroom learning
with work experience. Directly related to a technical discipline, specific learning
objectives guide the student through the paid work experience. This course may be
repeated if topics and learning outcomes vary.
INMT 2331: Robotics (3:2-2)
A study of the principles and applications of robots including installation, programming,
and maintenance of robots and robotic cells. $12 lab fee. (Formerly MTTE 2305).
QCTC 1303: Quality Control (3:2-2)
Information on quality control principles and applications. Designed to introduce the
student to the quality control profession. $12 lab fee. (Formerly MTTE 2317).
RBTC 1301: Programmable Controllers (3:2-2)
SMFT 1343: Semiconductor Manufacturing Technology I (3:2-2)
A study of the processes, materials, and equipment used in the manufacturing of
semiconductors, including an overview of the semiconductor industry, related
terminology, and standard safety practice.
WLDG 1417: Introduction to Layout and Fabrication (4:2-4)
A fundamental course in layout and fabrication related to the welding industry. Major
emphasis on structural shapes and use in construction. $17 lab fee.
WLDG 1428: Introduction to Shielded Metal Arc Welding (SMAW) (4:2-4)
Introduction to shielded metal arc welding with emphasis on welding theory and practical
application. The proper use and care of arc welding equipment with special emphasis on
safety. A survey of maintenance and repair welding theory, layout and production
welding. Laboratories consist of system construction and welding exercises and projects.
$17 lab fee.
WLDG 1430: Introduction to Gas Metal Arc Welding (MIG) (4:2-4)
Introduction to GMAW processes and equipment. Skills with each type welding process
are developed by making welds in different positions on plate and pipe. Laboratories will
include use of the latest equipment and the completion of a project that uses the skills
learned in the class. $17 lab fee.