SALES SPECIFICATION
FOR
EASTAR Copolyester EN067
A.
SPECIFICATION NO.:
EN067-2
NUMBER OF PAGES:
1
EFFECTIVE DATE:
October, 2004
GENERAL
This specification describes a grade of crystallized thermoplastic polyester in the form
of pellets which must meet all of the requirements listed below when tested
as directed by the methods also listed in Section B.
B.
PROPERTIES AND TEST METHODS
B-1.
Inherent Viscosity
0.58 to 0.62
B-2.
Base Resin (Precursor) Pellet Color
EMN-A-AC-G-V-1
EMN-A-AC-G-RS-1
The CIE L* and b* color of the base resin pellet material (precursor) is
certified through in-process testing and monitoring to be within the following
ranges:
CIE L*
CIE b*
56.2 Minimum
-1.9 to 0.6
For reasons of safety and accuracy, the person performing methods described herein
must be thoroughly trained and under the supervision of a professional person who is
knowledgeable in the relevant science. Equipment and materials described should
be used in accordance with safety precautions recommended by their manufacturers.
Eastman Chemical Company
Kingsport, Tennessee 37662