DX100 Math program – Using TLOG
Example: math channel 31&32 to totalize input channel 01&02
1) Press STOP key to stop recording. We need to stop both Memory+Math.
2) Press MENU key. Press Twice for CX1000
3) Press NEXT key 2 times.
4) Select #9 and input the following info into channel 31 than press Enter key.
5) Now change to channel 32 and enter all info exactly as below and press Enter key. The
only difference is channel 02 is the channel to totalize.
6) Now press ESC key.
7) Select #11. Set first channel as 31 and last as 32 and set exactly as below and press
Enter key. If this is a GPM flow use the /min if LBS/HR select /h.
8) Now press ESC key one time only to get back to Main Menu below.
9) Press and hold FUNC key for 3 seconds until display looks like below.
10)Press Next key twice until display looks like below.
11) Select #9
12) Now select #3. Make the screen look like below and Press Enter key. This will
totalize for 24 hours and no RESET. If you want to RESET total than select RESET =
ON.
13) Press ESC key and Next key to find screen below.
14) Select END and press Enter key and let the recorder reboot.
15) Press Menu key.
16) Press Next key.
17) Select #5
18) Select #1 and channels 31 and 32 to Group 1 like below.
19) Press Enter key.
20) Display should look like below.
21) Press ESC key to get back to display mode and Press Start key when ready. This will
start recording and Math.