Advance Jewelry and Metalsmithing
Syllabus
Spring 2011 Arts 2342 CRN: 64148
Friday 9:00 AM-3:00 PM
Instructor: Audry Herber
Email: audry.herber@hccs.edu
Art Office phone number: 713-718-6600 leave a message
Office Hours: by appointment only
Website: http://learning.cc.hccs.edu/members/audry.herber
Podcasts: http://itunes.hccs.edu/ (Click on Central College)
Course Description
Credit: 3 (Lecture and lab)
This class will cover the basics in jewelry fabrication. And students will create simple Jewelry pieces using
the techniques demonstrated in class by completing their assignments.
Prerequisites
Students must meet the basic intellectual competencies such as reading, writing, speaking,
listening, critical thinking and computer literacy.
Students enrolled in this class must have taken Arts 2341, an introduction to basic jewelry and
metalsmithing or the equivalent.
Repeating the Course
Students who repeat a course for a third or more times may soon face significant tuition/fee
increases at HCC and other Texas public colleges and universities. Please ask your
instructor/counselor about opportunities for tutoring/ other assistance prior to considering course
withdrawal or if you are not receiving passing.
*Jewelry and metalsmithing has now been added to studio courses to the exemption list.
Disability Disclaimer
Any student with a documented disability (e.g. physical, learning, psychiatric, vision, hearing, etc.) who
needs to arrange reasonable accommodations must contact the Disability Services Office at the respective
college at the beginning of each semester. Faculty are authorized to provide only the accommodations
requested by the Disability Support Services Office For questions, contact the Disability Counselor at your
college. Visit the ADA Web site at http://www.hccs.edu/students/disability/index.htm
Health Safety
It is strongly advised against taking this class if you are pregnant, have respiratory difficulties,
sensitivity to chemicals, metals, or hand and wrist problems.
Insurance Disclaimer
The Fine Arts Department at Central College strongly recommends that all HCCS students carry
some form of medical insurance to cover illness and injury, both on and off campus. Information
regarding low-cost health insurance for students is available in the Fine Arts office. Under Texas
state statute, HCCS is immune to liability in the event of accident or injury.
**Students can expect to incur the cost of their own art supplies, approximating $100.00 to $175.00.
Course Content
Shop and Tool Safety
Students must have passed and have knowledge of all information covered in Metals 1
Investigation of advance design
Using sulfuric acid process of anodizing aluminum
Using water based and solvent based dyes to color Aluminum
Course Objectives
Shop Safety
Exploring advance fabrication
Creating challenging designs
Understanding the use of varies tools
Exploration of finishing metal surfaces
Exploration and experimentation of cold connections techniques
Use of a acetylene torch for annealing aluminum
Investigation of creative stone settings
Exploring advance formation techniques
Upon Completing this course
Students must have an understanding of shop safety
1
Students must have an understanding of the use of tools and equipment in jewelry making
Students must understand and complete the guideline requirements for each project
Students must be able to apply concepts and techniques taught in class on all projects
*Attendance:
Class begins at 9:00 AM students arriving late (fifteen minutes or more) without a valid
excuse, or contacting the instructor through email or phone will be counted as absent.
Furthermore students are expected to remain in class for the entire three hours.
Roll is taken each time the class meets. Class attendance is checked daily. Although it is the
responsibility of the student to drop a course for non-attendance, the instructor has the
authority to drop a student for excessive absences. A student may be dropped from a course
for absenteeism after the student has accumulated absences in excess of 12.5% of the hours
of instruction, including lecture and laboratory time (after 12 hours of absence for this
class). Students with excessive tardiness of 4 or more will have their final grade lowered by ten
points. This will not change the due date of the assignments.
Grading:
*An “I” or Incomplete will be given if the student is unable to hand in the final assignment if
there is an “unplanned event such as an emergency or death.”
**Students are responsible for dropping classes on the given withdrawal date (*April 14,
2011 4:30 pm Last day of withdrawal) and failing to do so will result in a failing grade .
*NO PROJECT WILL BE ACCEPTED LATER THAN ONE WEEK PAST THE
DEADLINE unless the student addresses the issue with the instructor prior to the end of the
project will result in a lower grade on the work
*Projects must be handed in the following manner:
Assignments will be placed in a clear plastic bag and clearly marked with your name.
Adherence to the Assignment guidelines: Completing all assignments on time and following
instruction.
Quality of Execution: Work must properly finished and crafted.
Quality of Design: The use of creativity, balance of elements and use of positive and negative
space.
Application of Techniques and Concepts: Competence in the use of tools and techniques taught
in the class.
Organization: Keeping the working environment clean and respectful of fellow students and the
tools used in the studio.
*Writing ability: Students will keep a notebook with their notes and ideas. A written exam may
be given during the course of the semester.
Students will participate in discussion.
Research: Students must understand and be able to use a computer and the library to further
enhance their knowledge on Jewelry and Metalsmithing.
All students must show up for shop clean up and critique failing to do so will result in a
lower final grade.
Scholastic Dishonesty Policy
Houston Community College defines “scholastic dishonesty” as: cheating on a test, plagiarism,
and collusion. Penalties for academic dishonesty at HCCS include, but are not limited to, “O” on
the test or assignment in question and will result in a grade of “F”.
Grading and Evaluation of Jewelry Projects
5 Projects
Grade Scale
A 90-100 Excellent
B 80-89 Good
C 70-79 Average
D 60-69 Poor
F 0-59 Fail
The final grade will be an accumulation of points, which will then be averaged by the
number of assignments and test.
1.
Course and Studio Polices
Students not adhering to the safety policies, or using unsafe practices with equipment, causing
disruptive behavior with inappropriate conduct such as auguring, fighting, and insensitivity toward
2
the students or the instructor, will not be tolerated and will be documented and will lead to
expulsion from the class and studio. (Be nice, and be safe!)
2. Information covered in class will not be repeated for students who are absent or tardy. Students
are responsible on obtaining lectures and assignments.
3. Students missing the test will not be able to make them up.
4. Students are responsible to keep up with their handouts,
5. Removal of tools, books, equipment, or property of others including the instructors, will lead to
expulsion from studio and class.
6. Improper use of tools and equipment, which may cause harm to you or another, will not be
tolerated and can lead to expulsion from studio and class.
7. Cell phones should be switched to silent mode. If you must take a call please take the call outside
the classroom.
8. No texting during lecture.
9. Taking a call or use of a cell phone during exams is forbidden and will be viewed as cheating.
10. No personal stereos, headphones, or pagers.
11. No recording devices or photography, or video from any device may be allowed without
documentation from Disability support Services.
12. Texting or talking on the cell phone while working in the studio and during a lecture is forbidden.
13. Only Students currently enrolled in the Jewelry and Metalsmithing classes may use the Studio
facilities and equipment. Those who are not enrolled will be asked to leave.
14. The studios contains some dangerous equipment and chemicals and therefore, please refrain from
bringing pets and small children, they may be injured.
15. It is strongly advise against eating in class and beverages should have some sort of lid.
16. Students must take notes and ask questions about techniques and equipment if they do not
understand.
17. Students are responsible for obtaining the tools and materials used in the assignment.
18. Students are responsible for the cleanliness of their workspace and returning studio tools to the
proper area.
19. Students are responsible for picking up their art and supplies before the end of the semester:
All unclaimed art and supplies become the property of HCC
Academic advisement concerning specific Fine Arts Courses and degree plans for Jewelry and
Metalsmithing is available to Central College students during the academic semesters. Please sign up in the
Fine Arts office, FAC 101, to speak to a full time instructor in your area of interest.
All students are encouraged to sign up for the Fine Arts Newsletters:
www.centralfinearts.info
Use of Metal Studio
1. In order to use a studio, a student must have a current art studio pass issued by the fine arts office,
and signed by his / her current art instructor.
2. Students agree to adhere to the posted office hours and metal studio hours, and to be clear of all
spaces in time for the office staff to close according to security guidelines or before a class meets.
3. To receive a key to open a studio or when no instructor is present, students must register in the
Fine Arts Office:
a. Write your name, or HCCSD ID number legibly
b. Write the room number, date and time.
c. Leave studio pass with the office staff.
d. Sign out after using the studio: and reclaim studio pass.
e. There will be a $65 charge if you misplace the key.
4. Children and pets are not allowed in the art studios
5. Only students currently enrolled in the Jewelry and Metalsmithing classes may use the studio.
6. It is not acceptable to keep a key and leave personal belongings in a studio while attending another
class, or otherwise leave the building or campus.
7. Each student is responsible for keys checked out. Keys should never be passed from one student
to another. The student who signed for the key is responsible for the key until that student returns
to sign out.
8. When leaving the Metal studio make sure that your space is clean and tidy, all tools are put away
and stored in their proper place. All trash is dispose of. The gas is shut off and the lines are bled.
The vent is shut off. Pickle pots are turned off and unplugged. And the lights are turned off.
9. Any student who disregards these guidelines will lose the privilege of using the FAC studios.
3
10. The department strongly recommends that all students care some form of medical insurance while
enrolled at HCC Central College
Open Studio Schedule
Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Studio
Open studio
Open studio
Open studio
Open studio
Studio
Open studio
Closed
1:00 PM
1:00-5:30
1:00 PM
1:00-5:30
Closed
9:00 AM
-9:30 PM
PM
-9:30 PM
PM
(Class in
3:30 PM
session)
All students are encouraged to sign up for the Fine Arts Newsletter: www.centralfinearts.info
Suppliers of Tools and Equipment
Jewelry Supply In Houston:
In United States Jewelry Supply
*Jemco
Allcraft Jewelry Supply
9000 Southwest Fwy, Suite 300
135 W 29th Room 402
Houston, Texas 77074
New York, NY 10001
713-541-4242
1-800-645-7124
www.jemco-usa.com
www.allcraftonline.com
Houston Hardware and Hobby Stores:
Home Depot, Lowes, Ace, Tool Club, Northern
Hobby Lobby, Michaels
Gemstones
Fire Mountain Gems
http://www.firemountaingems.com/
Out of Our Mines
http://www.outofourmines.com/
*International Gem and Jewelry Show Jan 23-25
United States (Metals)
EastWest Dyecom,Inc
http://www.eastwestdye.com/list.php?cid=3
Hauser & Miller Co
Box 500700
St Louis, MO 63150
1-800-462-7447
hauserandmiller.com
Houston Metal Arts Guild
Houston Gem & Mineral Society
Society of North American Goldsmiths
Society of American Silversmiths
Ganoksin.com
Houston Center for Contemporary
American Craft Council
Indian Jewelers Supply Company
601 East Coal Ave.
Gallup, NM 87302
1-800-545-6540
ijsinc.com
Otto Frei
PO Box 796
Oakland, CA 94607
1-800-722-3456
http://www.ofrei.com
Rio Grande
7500 Blue water Road NW
Albuquerque, NM 87121-1962
1-800-545-6566
www.riogrande.com
Online Resources
http://www.hmag.org/
http://www.hgms.org/
http://www.snagmetalsmith.org/
http://www.silversmithing.com/
http://www.ganoksin.com
http://www.crafthouston.org/
http://www.craftcouncil.org/
Magazines:
“Metalsmith”, “American Craft”, “Jewelry Crafts”, “Crafts”, “Jewelry Arts & Lapidary Journal”,
“Ornament”
Textbooks for this course can be found at bookstores such as, Amazon, Borders, Barnes and Noble and
used bookstores
Textbook
Anodized! By Clare Stiles
(Optional)
Colored Aluminium Jewellery by Lindsey Mann
Materials for Jewelry and Metalsmithing:
4
(These items may be obtain as needed)
Required
Tools
Needed:
Resources
*Safety
Glasses
*Plastic
apron
Disposable
gloves (50100)
Metals 1
Tools
2-3 inch
Masking tape
*Plastic
sandwich
bags
*Towel or
paper towels
Notebook
Hardware
store
Jewelry Supply
store
Hardware
store
Discount
supply store
Discount
supply store
Discount
supply store
Permanent
Markers both
fine and ultra
fine in black,
pencils
Clear Sticky
plastic tape
Jewelry Supply
store
Solder Pad
Jewelry Supply
store
Discount
supply store
Bar of Ivory
soap
*Files
Plastic
placemat
Discount
supply store
Jewelry Supply
store
Discount
supply store
Materials:
Resources
12x12 inches of
Aluminum or pre
anodized
aluminum
Jewelry Supply store like Jemco
Or mail order from Rio Grande, Allcraft,
etc.
Aluminum rod and
tubing
Pre- Anodized
Aluminum
B&W images
Hardware store, Jewelry Supply store,
Craft supply
http://www.eastwestdye.com/list.php?cid=3
*Tempered
masonite
Acetone or
fingernail polish
Enamel paint like
fingernail polish
Spray paint
Enamel pen
Hardware store
Clip art books
To remove paint
Hardware store
Hardware store or discount store
Press-n-peel
PNPB20
(30 sheets)
Water base dyes
Techniks.com
http://www.techniks.com/
Art Supply Store
Paints and Pens
Art Supply Store
Printmaking
materials
*Color Wheel or
index
Art Supply Store
Art Supply Store
5
Assignment Outline
The following is an outline of lecture and assignments for the semester. It is subject to change if there are
any natural or unnatural disasters, any weird or bizarre occurrences, which may affect the students,
instructor, class, building, or campus from being open.
Calendar
Week 1
January 21
Introduction, Course Syllabus and overview
Week 2
Week 3
Week 4
Week 5
January 28
February 4
February 11
February 18
Week 6
Week 7
Week 8
Spring
Break
Week 9
Week 10
Week 11
February 25
March 4
March 11
March 1418
March 25
April 1
April 8
Work on Aluminum Sheets
Work on Aluminum Sheets
Assignment 1 Anodized Earrings
* Final work Assignment 1 Anodized Earrings Assignment 1 due at the
end of class.
Assignment 2 Bracelet
Assignment 2 Bracelet
*Assignment 2 Bracelet Due at the end of class
No class, Campus closed
Week 12
Week 13
Week 14
Week 15
April 15
April 22
April 29
May 6
Work on Assignment 3- Extreme wearable art with found object
Work on Assignment 4- Extreme wearable art with found object
*Assignment 3- Extreme wearable art with found object Work due for student
show Work on Assignment 4- Extreme wearable art with found object
Assignment 4 Surprise me
Easter Holiday
*Work on Assignment 4. All Final Work Due at the end of class
9:30 AM Shop Clean up and class critique and discussion. Work handed back.
* Students are responsible for picking up their work!
6