Curriculum proposal number 2009.47
Maui Community College
Curriculum Action Request (CAR) Form
Course
For Banner use:
___ SCACRSE
1. Author(s): Kyle Takushi/Paul Allen/Thomas Hussey
___ SCAPREQ
___ CAPPs
2. Department: Vocational/Technical
___ WebCT-Detl
___ CoReq-Detl
___ Equiv-Detl
3. Date submitted to Curriculum Committee: 10/2/09
___ Old Inactivated
___ Crosslist done
4. Type of action:
Addition:
regular
other; specify:
___ Another prereq
Modification:
alpha/number
title
credits
description
pre-requisite
co-requisite
recommended prep
other; specify: contact hours
5. Existing course:
Alpha: AMT Number:43 Title: Heating and Air Conditioning
Credits: 3
6. Proposed new/modified course:
Alpha: AMT Number:43 Title: Heating and Air Conditioning
Credits: 3
7. Reason for this curriculum action:
1. Align AMT curriculum to meet national (NATEF) standards. 2. Standardize credit and contact hours.
8. New course description (or year of catalog and page number of current course description, if
unchanged):
2009-2010, page 92
9. Pre-requisite(s) – see Prerequisite Style Sheet for samples:
ENG 19 with a grade C or better, or placement at least ENG 22. Student must maintain a valid driver's
license throughout the duration of the automotive course of studies.; or consent.
no
yes
10. Co-requisite(s): none
11. Recommended preparation: At least 10th grade reading skill, or consent.
12. Cross listed:
no
yes; cite course alpha & number:
13. Student contact hours per week:
hr. lecture
hr. lab
6 hr. lecture/lab
14. Grading: Standard (Letter, Cr/NCr, Audit)
hr. other; explain:
Explain, if not Standard grading:
Revised 6/28/2016
CAR Form (4-93), page 1
15. Repeatable for credit:
no
yes; maximum is
credit or
unlimited.
(Most courses are not repeatable for additional credit; exceptions are courses such as internships and co-op courses.)
16. Special fees required:
no
yes; explain: AMT shop fee.
17. Proposed term of first offering: Fall
semester of 2010
year.
18. List catalog used and then degrees, certificates, prerequisites, and catalog sections and their page
numbers affected by this proposal: 2009-2010 catalog, pages 34 and 92
19. Maximum enrollment: 16 Rationale, if less than 35: Limited shop space.
20. Special resources (personnel, supplies, etc.) required:
no
yes; explain:
21. Course is restricted to particular room type:
no
yes; explain: Auto shop.
22. Special scheduling considerations:
no
yes; explain:
23. Method(s) of delivery appropriate for this course: (check all that apply)
Traditional
HITS/Interactive TV
Cable TV
Online
Other, explain:
Hybrid
24. Mark all college-wide general education SLOs this course supports.
Std 1 - Written Communications
Std 2 – Quantitative Reasoning
Std 3 - Information Retrieval and Technology
Std 4 - Oral Communication
Std 5 - Critical Reasoning
Std 6 – Creativity
Other General Education SLOs, such as Ethics, Scientific Inquiry, or Service Learning.
Explain:
25. List all program SLOs this course supports? (Explain, if necessary)
Program SLO 1: Diagnose, service, and repair the heating and air conditioning system. Explain:
Program SLO 2: Utilize the computer to retrieve information for repairs and estimates. Explain:
Program SLO 3:
Explain:
Program SLO 4:
Explain:
Program SLO 5:
Explain:
26.
27.
Course fulfills the following general education elective (GE) for CTE (Career Technical Education)
AS/AAS degrees (GE):
English (EN)/Communication (CM)
Quantitative Reasoning (QR)
Humanities (HU)
Natural Science (NS)
Social Science (SS)
Other:
Course is a requirement for the AMTprogram(s) AS/AAS degree or certificate
Course is a program elective for the
program(s) AS/AAS degree or certificate
Course fulfills the following general education elective (GE) for the ABIT BAS degree:
Revised 6/28/2016
CAR Form (4-93), page 2
English (EN)/Communication (CM)
Quantitative Reasoning (QR)
Humanities (HU)
Natural Science (NS)
Social Science (SS)
Other:
Course is a requirement for the ABIT BAS degree
Course is a program elective for the ABIT BAS degree
28.
29.
Course fulfills a requirement for a proposed BAS
degree:
Pre- requisite course
Core
Capstone Course (CC)
Other:
Course is a program elective for a proposed BAS
degree
Course fulfills the following general education elective (GE) for the proposed BAS
English (EN)/Communication (CM)
Quantitative Reasoning (QR)
Humanities (HU)
Natural Science (NS)
Social Science (SS)
Other:
Course is applicable to the following additional BAS degrees:
degree:
Course satisfies the following category for the AA degree*:
Category I: Foundations/Skills: Foundations I
Written Communication in English (FW)
Global and Multicultural Perspectives (FG)
Group A (before 1500 CE)
Group B (since 1500 CE)
Group C (pre-history to present)
Symbolic Reasoning (FS)
Category I: Foundations/Skills: Foundations II
Numeracy (FN)
Oral Communication in English (FO)
Computer/Information Processing and Retrieval (FI)
Category II: Breadth of Understanding and Experience
Human Understanding
The Individual (IN)
The Community (CO)
The Community – Global Perspective (CG)
Human Expression (HE)
Environmental Awareness (EA)
Environmental Awareness – Global Perspective (EG)
Asia/Pacific Perspective (AP)
Category III Focus/Specialization/Area of Interest
Interest Area Discipline/Alpha:
Elective (LE)
Other Graduation Requirements
Writing Intensive (is appropriate for WI)
Environmental Awareness Lab/course with lab (EL)
Hawaii Emphasis (HI)
Revised 6/28/2016
CAR Form (4-93), page 3
* Submit the appropriate form(s) to have the course placed in the requested category (ies). Submit a course
outline, CAR, and appropriate forms to both the Curriculum Committee and the Foundations Board, if the
course satisfies Category I: Foundations/Skills: Foundations I or II.
30. Course
increases
decreases
makes no change to number of credits required for program(s)
affected by this action. Explain, if necessary:
31. Course is taught at another UH campus (see Sections 5 and 6 above):
no Explain why this course is proposed for MCC:
yes Specify college(s), course, alpha, and number where same or similar course is taught: AMT 43 at
HCC, LCC, KauaiCC, and HawaiiCC
32. Course is:
Not appropriate for articulation.
Appropriate* for articulation as a general education course at:
UHCC
UH Manoa UH Hilo UHWO
Previously articulated* as a general education course at:
UHCC UH Manoa UH Hilo UHWO
*Note: Submit Course Articulation Form if course is already articulated, or is appropriate for articulation,
as a general education (100-, 200-level) course.
Standardized and/or appropriate for articulation by PCC or other UH system agreement at:
UHCC
UH Manoa
UH Hilo
UHWO Explain:
Appropriate for articulation or has previously been articulated to a specific department or institution:
UHCC UH Manoa UH Hilo UHWO
Outside UH system Explain:
33. Additional Information (add additional pages if needed): This change permits the course to align with
the minimum number of training hours required for national certification with the National
Automotive Technicians Education Foundation (NATEF). The contact hour change for this
course will standardize the AMT credit to contact hour ratio. This ratio is used for the other
NATEF certified programs in the UH system (HCC and LCC).
Revised 6/28/2016
CAR Form (4-93), page 4
Maui Community College
Curriculum Action Request (CAR) Signature Page
__________________________________________________________________________
Proposed by: Author or Program Coordinator
Date
__________________________________________________________________________
Checked by: Academic Subject Area Representative to Curriculum Committee Date
__________________________________________________________________________
Requested by Department: Department Chair
Date
__________________________________________________________________________
Recommended by: Curriculum Chair
Date
__________________________________________________________________________
Approved by Academic Senate: Academic Senate Chair
Date
__________________________________________________________________________
Endorsed by: Chief Academic Officer
Date
__________________________________________________________________________
Approved by: Chancellor
Date
Revised 6/28/2016
CAR Form (4-93), page 5
Maui Community College
Course Outline
1. Alpha
AMT
Number
43
Course Title
Heating and Air Conditioning
Credits
3
Department
Vocational/Technical Author Kyle Takushi
Date of Outline
7/21/2009
2. Course Description:
Effective Date Fall 2010
5-year Review Date 2016
Examines principles of operation, diagnosis, service, and repair of
automotive air conditioning, heating, and automatic climate control
systems. Explains use of automotive tools and testing equipment.
Cross-list
Contact Hours/Type
3. Pre-requisites
6 hours Lecture/Lab
15 weeks x 6 hrs. = 90 hrs.
ENG 19 with a grade C or better, or placement at least ENG 22, or consent.
Student must maintain valid Driver’s license throughout the duration of the
automotive course of studies.
Pre-requisite may be waived by consent
Co-requisites
AS Program
no
None
Recommended Preparation
4. Function/Designation
yes
At least 10th grade reading skill or consent
AA Category
Category
Additional Category
List Additional Programs and Category:
AAS Program
PR - Program Requirement
BAS Program
Category
Developmental/Remedial
List Additional Programs and Category:
List Additional Programs and Category:
Other/Additional: Explain:
See Curriculum Action Request (CAR) form for the college-wide general education student learning
outcomes (SLOs) and/or the program learning outcomes (PLOs) this course supports.
Revised 6/28/2016
CAR Form (4-93), page 6
This course outline is standardized and/or the result of a community college or system-wide
agreement.
Responsible committee:
5. Student Learning Outcomes (SLOs): List one to four inclusive SLOs.
For assessment, link these to #7 Recommended Course Content, and #9 Recommended Course
Requirements & Evaluation. Use roman numerals (I., II., III.) to designate SLOs
On successful completion of this course, students will be able to:
I. Describe principles of operation for the automotive HVAC systems.
II. Explain the use of automotive tools and testing equipment for automotive HVAC systems.
III. Demonstrate diagnostic, service and repairs procedures of the automotive HVAC systems.
IV. Utilize the computer and other resources to retrieve information for repairs and estimates.
6. Competencies/Concepts/Issues/Skills
For assessment, link these to #7 Recommended Course Content, and #9 Recommended Course
Requirements & Evaluation. Use lower case letters (a., b.…zz. )to designate
competencies/skills/issues
On successful completion of this course, students will be able to:
a. Demonstrate the ability to comply with all state and federal safety and evironmental regulations.
b. Identify the basic principles of automotive air conditioning system.
c. Identify basic air conditioning components, how they function and the typical automotive air
conditioning system designs.
d. Demonstrate the ability to perform basic service on an automotive air conditioning system and
identify alternate refrigerants and their use.
e. Demonstrate the ability to perform basic service and diagnostic procedures on an automotive air
conditioning systems.
f. Demonstrate the ability to service the automotive air conditioning compressor and compressor
clutch.
g. Demonstrate the ability to repair and replace the evaporator, condensor, thermal expansion valve
and receiver-dryer.
h. Identify the basic principles by which a vehicles heating and engine cooling system operates and
procedures for repairing a vehicles heating and engine cooling system.
i. Demonstrate the ability to inspect, test and repair the electrical components of the automotive
HVAC systems.
j. Demonstrate the ability to diagnose and repair HVAC system control devices.
k. Demonstrate the ability to diagnose automatic and semi-automatic heating and cooling control
systems.
l. Identify the need for air conditioning system retrofits and perform the two types of retrofits.
7. Suggested Course Content and Approximate Time Spent on Each Topic
Linked to #5. Student Learning Outcomes and # 6 Competencies/Skills/Issues
Revised 6/28/2016
CAR Form (4-93), page 7
1 week : Introduction to safety procedures for all state and federal regulations for handling, storing
and disposal of chemicals. I,a,d
3 weeks : Introduction to HVAC systems. I,a,b,c,d,h
2 weeks : Air conditioning systems operating principles. I,b,c,d,h,l
2 weeks : Air conditioning systems service and diagnostics. II,III,IV,d,e,f,h,i,j,k,l
2 weeks : Air conditioning system repair. II,III,IV,d,e,f,g,i,j,k,l
1 week : Heating and engine cooling system service and repair. II,III,IV,h,i,j,k
1-2 weeks : Inspection, testing and repair of electrical components of the HVAC systems.
II,III,IV,i,j,k
1-2 weeks : Diagnosis and repair HVAC control systems. II,III,IV,j,k
8. Text and Materials, Reference Materials, and Auxiliary Materials
Appropriate text(s) and materials will be chosen at the time the course is offered from those currently
available in the field. Examples include: Automotive Heating and Air Conditioning, class manual 4th
edition. By : Prentice Hall
Appropriate reference materials will be chosen at the time the course is offered from those currently
available in the field. Examples include: Handouts provided by instructor, Videos
Appropriate auxiliary materials will be chosen at the time the course is offered from those currently
available in the field. Examples include: Automotive periodicals, Internet sites
9. Suggested Course Requirements and Evaluation
Linked to #5. Student Learning Outcomes (SLOs) and #6 Competencies/Skills/Issues
Specific course requirements are at the discretion of the instructor at the time the course is being
offered. Suggested requirements might include, but are not limited to:
Attendance
Classroom and Shop Management
Notebook
Automotive Tasks (shop)
Examinations (written)
10% I,II,III,IV,a,b,c,d,e,f,g,h,i,j,k,l
10% I,II,III,IV,a,b,c,d,e,f,g,h,i,j,k,l
5% I,II,III,IV,a,b,c,d,e,f,g,h,i,j,k,l
35% I,II,III,IV,c,d,e,f,g,h,i,j,k,l
40% I,II,III,IV,a.b.c.d.e.f.g.h.i.j.k.l
10. Methods of Instruction
Instructional methods will vary considerably by instructor. Specific methods are at the discretion of
the instructor teaching the course and might include, but are not limited to:
a. Written exams
b. In-class excercises
c. Problem solving activities
d. Homework assignments
e. Group and individual projects
f. Class discussion
g. Guest lecturers
h. Audio and visual presentations
i. Other techniques (service learning, co-op, etc.
Revised 6/28/2016
CAR Form (4-93), page 8
11. Assessment of Intended Student Learning Outcomes Standards Grid attached
12. Additional Information:
Assessment of Intended Student Learning Outcomes Standards – CCOWIQs with Ratings for AMT 43
Key:
3 = Major Emphasis: The student is actively involved (uses, reinforces, applies, and evaluated) in the student learning outcomes. The
learner outcome is the focus of the class.
2 = Moderate Emphasis: The student uses, reinforces, applies and is evaluated by this learner outcome, but it is not the focus of the class
1 = Minor Emphasis: The student is provided an opportunity to use, reinforce, and apply this learner outcome, but does not get evaluated
on this learner outcome
0 = No Emphasis: The student does not address this learner outcome
Standard 1: Written Communication
Program graduates are able to write effectively to convey ideas that meet the needs of specific audiences and
purposes.
1. Use writing to discover and articulate ideas
1.2 Identify and analyze the audience and purpose for any intended communication
1.3 Choose language, style and organization appropriate to particular purposes and audiences
1.4 Gather information and document sources appropriately
1.5 Express a main idea as a thesis, hypothesis, and other appropriate content
1.6 Develop a main idea clearly and concisely with appropriate content
1.7 Demonstrate mastery of the conventions of writing, including grammar, spelling, and mechanics
1.8 Demonstrate proficiency in revision and editing
1.9 Develop a personal voice in written communication
Standard 2: Quantitative Reasoning
Program graduates are able to synthesize and articulate information using appropriate mathematical methods to
solve problems and logically address real-life situations.
2.1 Apply numeric, graphic and symbolic skills and other forms of quantitative reasoning, accurately and
appropriately
2.2 Demonstrate mastery of mathematical concepts, skills, and applications, using technology when appropriate
2.3 Communicate clearly and concisely the methods and results of quantitative problem solving
2.4 Formulate and test hypotheses using numerical experimentation
2.5 Define quantitative issues and problems, gather relevant information, analyze that information, and present
results
2.6 Assess the validity of statistical conclusions
Standard 3: Information Retrieval and Technology (Information Literacy)
Program graduates are able to access, evaluate, and utilize information effectively, ethically and responsibly.
3.1 Use print and electronic information technology ethically and responsibly
3.2 Demonstrate knowledge of basic vocabulary, concepts, and operations of information technology and retrieval
3.3 Recognize, identify, and define an information need
3.4 Access and retrieve information through print and electronic media, evaluating the accuracy and authenticity
of that information
3.5 Create, manage, organize, and communicate information through electronic media
3.6 Recognize changing technologies and make informed choices about their appropriateness and use.
Standard 4: Oral Communication
Program graduates are able to practice ethical and responsible oral communications appropriate to a variety of
audiences and purposes.
4.1 Identify and analyze the audience and purpose of any intended communication.
4.2 Gather, evaluate, select, and organize information for the communication.
AMT
43
0
1
0
2
0
1
2
1
0
1
2
2
1
2
0
1
1
2
2
0
2
1
1
Revised 6/28/2016
CAR Form (4-93), page 9
4.3 Use language, techniques, and strategies appropriate to the audience and occasion.
4.4 Speak clearly and confidently, using the voice, volume, tone, and articulation appropriate to the audience and
occasion
4.5 Summarize, analyze, and evaluate oral communications and ask coherent questions as needed.
4.6 Use competent oral expression to initiate and sustain discussion.
Standard 5: Critical Thinking
Program graduates are able to apply critical reasoning skills to effectively address the challenges and solve
problems.
5.1 Identify and state problems, issues, arguments, and questions contained in a body of information.
5.2 Identify and analyze assumptions and underlying points of view relating to an issue or problem.
5.3 Formulate research questions that require descriptive and explanatory analyses.
5.4 Recognize and understand multiple modes of inquiry, including investigative methods based on observation
and analysis.
5.5 Evaluate a problem, distinguishing between relevant and irrelevant facts, opinions, assumptions, issues,
values, and biases through the use of appropriate evidence.
5.6 Apply problem-solving techniques and skills, including the rules of logic and logical sequence.
5.7 Synthesize inform from various sources, drawing appropriate conclusions.
5.8 Communicate clearly and concisely the methods and results of logical reasoning.
5.9 Reflect upon and evaluate their thought processes, value system, and world views in comparison to those of
others.
Standard 6: Creativity
A student who graduates from MCC with a degree can express originality through a variety of forms.
6.1 Generates responses to problems and challenges through intuition and non-linear thinking.
6.2 Explores diverse approaches to solving a problem or addressing a challenge.
6.3 Sustains engagement in activities without a preconceived purpose.
6.4 Demonstrates the ability to trust and follow one’s instincts in the absence of external direction.
6.5 Applies creative principles to discover and express new ideas.
6.6 Builds upon or adapts the ideas of others to create novel expressions or new solutions.
1
1
1
1
1
2
1
2
3
2
1
1
0
0
0
0
0
0
0
Revised 6/28/2016
CAR Form (4-93), page 10