Plan and carry out a dive using a diver propulsion... marine farm

advertisement
21350 version 2
Page 1 of 4
Plan and carry out a dive using a diver propulsion vehicle (DPV) on a
marine farm
Level
4
Credits
5
Purpose
People credited with this unit standard are able to plan a dive to use a DPV
and carry out a dive using DPV on a marine farm, and complete recording
and reporting requirements for the dive.
Subfield
Seafood
Domain
Aquaculture Diving
Status
Registered
Status date
20 November 2009
Date version published
20 November 2009
Planned review date
31 December 2014
Entry information
Prerequisites: Unit 4387, Perform diver rescues or PADI
Rescue Diver qualification; Unit 4385, Navigate
prescribed routes underwater; Unit 4388, Complete a
night dive; Unit 4393, Complete underwater search and
recovery dives; Unit 4398, Complete deep dives to
between 18 and 40 metres, and perform tasks; and Unit
21344, Explain health and safety legislation and the
application of best practice to aquaculture diving; or
demonstrate equivalent knowledge and skills.
Accreditation
Evaluation of documentation and visit by NZQA and
industry.
Standard setting body (SSB)
Primary Industry Training Organisation
Accreditation and Moderation Action Plan (AMAP) reference
0123
This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
 New Zealand Qualifications Authority 2016
21350 version 2
Page 2 of 4
Special notes
1
Industry technical requirements and safety criteria are contained within the New
Zealand Aquaculture Industry Diving Best Practice Guidelines 2004, available from
Aquaculture New Zealand, Level 1, Wakatu House, Montgomery Square, Nelson
7010 (http://www.aquaculture.org.nz). This is referred to as the Diving Best Practice
Guidelines in this unit standard.
2
The assessment of element two must be carried out in underwater visibility conditions
that are common for aquaculture industry diving.
3
Definitions
Company requirements refer to instructions to staff on policy and procedures that are
communicated in an oral or written form. These must include the requirements of the
Diving Best Practice Guidelines.
Legislation includes but is not limited to – the occupational diving related aspects of
the Health and Safety in Employment Act 1992.
PADI refers to the Professional Association of Diving Instructors.
Elements and performance criteria
Element 1
Plan a dive to use a DPV on a marine farm.
Performance criteria
1.1
The reasons for planning a dive to use a DPV are explained in accordance with
company requirements and safety criteria.
Range
1.2
safety focus of divers, legislation.
Potential hazards associated with the use of a DPV and the remedial actions
are explained.
Range
hazards may include but are not limited to – environmental
hazards, marine organisms, limited visibility, disorientation, current
strength, entanglement, strenuous activity, rapid ascent and
decent, equipment failure, equalisation, distance, time, battery life,
extended air time;
evidence of four hazards is required;
remedial actions include action taken to eliminate, isolate or
minimise the hazard, such as – decision not to dive, decision not
to recover object, access to safety equipment, communication
plan, use of diver location device, emergency plan.
 New Zealand Qualifications Authority 2016
21350 version 2
Page 3 of 4
1.3
The dive plan to carry out a dive using DPV is completed in accordance with
company requirements and safety criteria.
Range
includes but is not limited to – fitness and capability of the dive
team, personnel numbers, surface conditions, diving platform and
vantage points, in-water conditions, depth, equipment, bottom
topography, communication signals.
Element 2
Carry out a dive using DPV on a marine farm.
Performance criteria
2.1
A pre-dive check is demonstrated in accordance with company requirements
and safety criteria.
2.2
The procedure for dealing with DPV failure is demonstrated in accordance with
company requirements.
2.3
The dive using a DPV is carried out in accordance with the dive plan and
company requirements.
2.4
Communication signals are given, received, and responded to as agreed in the
dive plan.
2.5
Post-dive DPV maintenance is carried out in accordance with company
requirements.
Range
may include but is not limited to – cleaning, battery charging and
maintenance.
Element 3
Complete recording and reporting requirements for the dive.
Performance criteria
3.1
Recording and reporting requirements are completed in accordance with OSH
and company requirements.
Range
includes but is not limited to – personal logbook, company
logbook, reporting schedule.
Please note
Providers must be accredited by NZQA, or an inter-institutional body with delegated
authority for quality assurance, before they can report credits from assessment against
unit standards or deliver courses of study leading to that assessment.
Industry Training Organisations must be accredited by NZQA before they can register
credits from assessment against unit standards.
 New Zealand Qualifications Authority 2016
21350 version 2
Page 4 of 4
Accredited providers and Industry Training Organisations assessing against unit standards
must engage with the moderation system that applies to those standards.
Accreditation requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for organisations
wishing to develop education and training programmes, such as minimum qualifications for
tutors and assessors, and special resource requirements.
Comments on this unit standard
Please contact the Primary Industry Training Organisation standards@primaryito.ac.nz if
you wish to suggest changes to the content of this unit standard.
 New Zealand Qualifications Authority 2016
Download