NZQA Expiring unit standard
Title
21177 version 3
Page 1 of 3
Describe the reasons for weighing, and weigh items at a hot dip galvanizing facility
3 Credits 2 Level
Purpose People credited with this unit standard are able to describe the reasons for weighing, and weigh items at a hot dip galvanizing facility.
Classification
Available grade
Entry information
Hot Dip Galvanizing > Hot Dip Galvanizing Operations
Achieved
Critical health and safety prerequisites
Open.
Explanatory notes
1 The current version of the following documents must be complied with:
Health and Safety in Employment Act 1992 (HSE);
Health and Safety in Employment Regulations 1995;
Weights and Measures Act 2005;
This unit standard is
2 Candidates using a forklift or crane must have the relevant certification and training for the equipment being used. expiring
3 Personal protective equipment (PPE) must be used throughout operations in accordance with company procedures.
4 Definition
Company procedures refer to all documented policies and procedures of the candidate’s employer at the time of training including, but not limited to, those relating to health, safety, environment, quality, and operations.
Outcome 1
Describe the reasons for weighing, and weigh items at a hot dip galvanizing facility.
New Zealand Qualifications Authority 2020 NZ Motor Industry Training Organisation
(Incorporated) (MITO)
SSB Code 101542
This unit standard is expiring
New Zealand Qualifications Aut
NZQA Expiring unit standard
Evidence requirements
1.1
21177 version 3
Page 2 of 3
The significance of the weight of hot dip galvanizing items is described in relation to the customer and hot dip galvanizing facility requirements.
1.2 Hazards of weighing hot dip galvanizing items are identified and controlled in accordance with the HSE Act and company procedures.
Range hazards include but are not limited to – lifting, moving machinery, load instability, personal injury.
1.3 Hot dip galvanizing items are collated and moved to scales in accordance with the required stage in the process and company procedures.
Range stage in process – before hot dip galvanizing, after hot dip galvanizing; collation may include
– batch, customer requirements, size, efficiency.
1.4 Weights of hot dip galvanizing items are read and recorded in accordance with company procedures.
Range record may include but is not limited to – job sheet, purchase order, packing slip.
Replacement information This unit standard and unit standard 21166 have been replaced by unit standard 28442.
Status information and last date for assessment for superseded versions
Process Version Date expiring
Last Date for Assessment
Registration 1 21 October 2004 31 December 2016
Review 2 23 January 2009 31 December 2016
Review 3 16 April 2015 31 December 2016
Consent and Moderation Requirements (CMR) reference 0114
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do
.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.
New Zealand Qualifications Authority 2020 NZ Motor Industry Training Organisation
(Incorporated) (MITO)
SSB Code 101542
This unit standard is expiring
New Zealand Qualifications Aut
NZQA Expiring unit standard 21177 version 3
Page 3 of 3
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.
This unit standard is expiring
NZ Motor Industry Training Organisation
(Incorporated) (MITO)
SSB Code 101542
New Zealand Qualifications Authority 2020
This unit standard is expiring
New Zealand Qualifications Aut