NZQA registered Australian standard
Title
Conduct raise boring
Level
4
Purpose
22492 version 2
Page 1 of 2
Credits
20
This standard comprises this cover sheet and Australian unit of
competency RIINHB312D.
People credited with this standard are able to: plan and prepare
for raise boring; locate collar and drill pilot hole; drill and
monitor progress of pilot hole; ream raise bore; respond to
problems; and complete equipment maintenance and
housekeeping.
Classification
Drilling Industry > Drilling - General
Available grade
Achieved
Australian Qualifications Framework Details
Unit of Competency Code
RIINHB312D
Unit of Competency Name
Conduct raise boring
Developer
SkillsDMC
Explanatory notes
1
The Australian unit of competency can be accessed using this link RIINHB312D
Conduct raise boring. The RII Resources and Infrastructure Industry Training
Package can be downloaded from Training.gov.au. This standard has been listed on
New Zealand’s Directory of Assessment Standards as part of the Mutual Recognition
of Vocational Education and Training Qualifications between Australia and New
Zealand, and has been endorsed by the NZ Motor Industry Training Organisation
(Inc) (MITO).
2
Memorandum of Understanding (MOU)
An MOU has been established between MITO and SkillsDMC (the Australian
National Industry Skills Council for the Resources and Infrastructure sectors). The
MOU outlines moderation in New Zealand, the granting of consent to assess against
standards to providers in New Zealand, and the provision for participation of the
New Zealand industry in the review of this standard. This document can be viewed
at http://www.mito.org.nz. Further information relating to consent to assess against
and moderation of this standard is outlined in MITO’s Consent and Moderation
Requirements (CMR) 0114.
NZ Motor Industry Training Organisation
(Incorporated) (MITO)
SSB Code 101542
 New Zealand Qualifications Authority 2016
NZQA registered Australian standard
3
22492 version 2
Page 2 of 2
All workplace practices must meet recognised codes of practice, documented
workplace health, safety and environmental procedures (where these exceed the
code) for personal, product, workplace health, safety, and environmental matters,
and the obligations required under current law including: the Health and Safety in
Employment (HSE) Act 1992; HSE Regulations 1995; HSE (Mining Operations and
Quarrying Operations) Regulations 2013; Resource Management Act 1991;
Hazardous Substances and New Organisms (HSNO) Act 1996; HSNO (Personnel
Qualifications) Regulations 2001; and their subsequent amendments.
Planned review date
31 December 2019
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
20 November 2006
31 December 2018
Review
2
20 November 2014
N/A
Consent and Moderation Requirements (CMR) reference
0114
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Comments on this unit standard
Please contact NZ Motor Industry Training Organisation info@mito.org.nz if you wish to
suggest changes to the content of this unit standard.
NZ Motor Industry Training Organisation
(Incorporated) (MITO)
SSB Code 101542
 New Zealand Qualifications Authority 2016