NZQA registered unit standard
11811 version 5
Page 1 of 3
Title
Carry out second layout measurement check and trim in the
sailmaking industry
Level
4
Credits
15
Purpose
This unit standard is for people who work in the sailmaking
industry. People credited with this unit standard are able to:
prepare to carry out a second layout measurement check; and
carry out a second layout measurement check and trim.
Classification
Industrial Textile Fabrication > Sailmaking
Available grade
Achieved
Explanatory notes
1
Legislation and rules relevant to this unit standard include but are not limited to – the
Health and Safety in Employment Act 1992, and International or National Rating
and/or Racing Class Rules.
2
Definitions
Company requirements refer to instructions to staff on policy and procedures which
are documented in memo or manual format and are available in the workplace.
These requirements include but are not limited to – company specifications and
procedures, work instructions, sail manufacturer design specifications, product
quality specifications, and legislative requirements.
Class rules are rules prescribed internationally by the International Sailing Federation
and administered locally by Yachting New Zealand. Rules apply to racing and
recreational sailing. Yachting New Zealand’s website is
http://www.yachtingnz.org.nz/.
Outcomes and evidence requirements
Outcome 1
Prepare to carry out a second layout measurement check.
Evidence requirements
1.1
Overall sizes are confirmed in accordance with design specifications.
1.2
Tools, equipment and materials are selected to carry out the second
measurement check in accordance with company requirements.
NZ Motor Industry Training Organisation
(Incorporated)
SSB Code 101542
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
11811 version 5
Page 2 of 3
1.3
It is ensured that the surface the sail is to be laid on is clean in accordance with
company requirements.
1.4
Sail to be measured is laid out on a suitable surface in accordance with
company requirements.
Outcome 2
Carry out a second layout measurement check and trim.
Evidence requirements
2.1
Parameter measurements are checked, finalised, and marked, and all
measurements are accurate in accordance with design specifications.
2.2
Edges are trimmed to size in accordance with design specifications.
2.3
Accessories are marked in accordance with design specifications, and
measurements are accurate.
may include but is not limited to – pockets, patches, numbers,
logos, draft stripes, sponsorship logos, windows.
Range
2.4
Safe working practices are carried out throughout the task in accordance with
legislative requirements.
Range
personal safety; safety of other people; environmental safety; tool,
equipment, and machine safety.
Planned review date
31 December 2019
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
25 September 1997
N/A
Revision
2
14 November 2000
N/A
Revision
3
16 October 2003
N/A
Review
4
26 March 2007
N/A
Rollover
5
27 January 2015
N/A
Consent and Moderation Requirements (CMR) reference
0014
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
NZ Motor Industry Training Organisation
(Incorporated)
SSB Code 101542
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
11811 version 5
Page 3 of 3
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Comments on this unit standard
Please contact the NZ Motor Industry Training Organisation (Incorporated) (MITO)
info@mito.org.nz if you wish to suggest changes to the content of this unit standard.
NZ Motor Industry Training Organisation
(Incorporated)
SSB Code 101542
 New Zealand Qualifications Authority 2016