4426 version 2 28-Jun-16 1 of 4 DIVING - OCCUPATIONAL Operate a compression chamber level: 5 credit: 5 planned review date: June 2002 sub-field: Diving purpose: People credited with this unit standard are able to operate a chamber, and use surface decompression. entry information: Prerequisites: Unit 4421, Use a chamber for recompression treatment for divers, Unit 6401, Provide first aid and Unit 6402, Provide resuscitation level 2, or demonstrate equivalent skills and knowledge; and hold a current Medical Clearance to dive and occupational-specific certificate of competence. accreditation option: Evaluation of documentation and visit by NZQA and industry. moderation option: A centrally established and directed national moderation system has been set up by the Dive Industry Training Organisation. New Zealand Qualifications Authority 2016 4426 version 2 28-Jun-16 2 of 4 DIVING - OCCUPATIONAL Operate a compression chamber special notes: 1 Industry criteria refer to diving practice complying with the requirements of the Health and Safety in Employment Act 1992 and subsequent regulations relating to Occupational Diving; and comply with the theory and practice requirements of the British Health and Safety Executive (HSE) 1990 to ensure the international standard is maintained. All practice also complies with Accident Rehabilitation & Compensation Insurance Corporation and Occupational Safety and Health (OSH) guidelines. 2 BIBS stands for Built In Breathing Systems. Elements and Performance Criteria element 1 Operate a chamber to industry criteria. performance criteria 1.1 A pre-determined schedule of time and/or depth is followed to pressurise and/or depressurise a chamber. 1.2 Depth is maintained during chamber flushing. 1.3 Equipment is passed into and/or out of the chamber using the medical lock. 1.4 BIBS is operated to industry technical and safety criteria. New Zealand Qualifications Authority 2016 4426 version 2 28-Jun-16 3 of 4 DIVING - OCCUPATIONAL Operate a compression chamber 1.5 Recording of chamber use monitors time and depth. element 2 Use surface decompression. performance criteria 2.1 A pre-determined rate is followed during surfacing to industry criteria. 2.2 Assistance given to diver leaving the water meets industry criteria. 2.3 Chamber approach meets industry criteria. 2.4 Undressing procedures comply with industry criteria. 2.5 Chamber procedures comply with industry criteria. Range: pressure equalisation between entry and main lock, transfer through to main lock, close door. New Zealand Qualifications Authority 2016 4426 version 2 28-Jun-16 4 of 4 DIVING - OCCUPATIONAL Operate a compression chamber Comments to: Dive Industry Training Organisation Unit Standard Revision PO Box 160 WELLINGTON by June 2002. Please Note: Providers must be accredited by the Qualifications Authority before they can offer programmes of education and training assessed against unit standards. Accredited providers assessing against unit standards must engage with the moderation system that applies to those unit standards. [Please refer to relevant Plan ref: 0180] New Zealand Qualifications Authority 2016