NZQA registered unit standard
26659 version 2
Page 1 of 3
Title
Evaluate and troubleshoot civil engineering laboratory fresh concrete
tests
Level
5
Purpose
Credits
10
This unit standard is one of a series relating to concrete testing
and senior technician level knowledge and skills.
People credited with this unit standard are able to: evaluate
results of civil engineering laboratory fresh concrete tests; and
troubleshoot abnormal civil engineering laboratory fresh
concrete test results and scenarios.
Classification
Infrastructure Civil Engineering > Infrastructure Laboratory
Available grade
Achieved
Entry information
Recommended skills
and knowledge
Unit 26053, Carry out routine tests on fresh concrete, or
demonstrate equivalent knowledge and skills.
Explanatory notes
1
Applicable rules, standards, and codes include but are not limited to ISO/IEC
17025:2005 General requirements for the competence of testing and calibration
laboratories, available from http://www.iso.org/iso/store.htm; NZS 3112: Parts 1 4:1986 available from http://www.standards.co.nz.
2
Evidence is required for a minimum of three civil engineering laboratory fresh
concrete tests, which may include but are not limited to – Yield, Slump, Air Content,
Spread, Unit Mass, Flow.
3
Definitions
Evaluate refers to interpreting test results in terms of the relevant test method, client
processes and the project. The evaluation must identify options for corrective action
and the scientific basis for these corrective actions. Components will vary between
tests and include but are not limited to – the evaluation of task performance,
compliance with organisational and test method requirements, from sample and
equipment preparation to the calculation and reporting of results.
Organisational requirements refer to instructions to staff on policy and procedures
which are formally documented or generally accepted at the worksite. This may
include legislation; industry standards and methods; national and international
standards and methods; customer/organisation developed methods; standard
operating procedures; specifications; manuals; and manufacturer’s information.
Infrastructure ITO
SSB Code 101813
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
26659 version 2
Page 2 of 3
Problem-solving techniques may include but are not limited to – cause and effect
diagrams, hypothesis testing, appreciative enquiry, process flowchart analysis.
Scenario refers to an actual situation with contributing factors; these factors may
include environment, conditions, materials, circumstances, location, relevance, site,
context, status, work place.
Troubleshoot refers to identifying problems in test scenarios and results, and to
applying a problem-solving technique suitable to the problem in terms of the relevant
test method, client processes, and project to reach a realistic solution.
Outcomes and evidence requirements
Outcome 1
Evaluate results of civil engineering laboratory fresh concrete tests.
Evidence requirements
1.1
Results are evaluated in accordance with organisational requirements.
may include but is not limited to – non-conformance, corrective
action taken.
Range
Outcome 2
Troubleshoot abnormal civil engineering laboratory fresh concrete test results and
scenarios.
Evidence requirements
2.1
Abnormal test results are troubleshot to identify the nature of the problem,
effective problem solving techniques are applied, and a valid solution is reached
in accordance with organisational requirements.
2.2
Abnormal test scenarios are troubleshot to identify the nature of the problem,
effective problem solving techniques are applied, and a valid solution is reached
in accordance with organisational requirements.
Planned review date
31 December 2019
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
21 January 2011
31 December 2016
Review
2
19 February 2015
N/A
Consent and Moderation Requirements (CMR) reference
0101
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Infrastructure ITO
SSB Code 101813
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
26659 version 2
Page 3 of 3
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Comments on this unit standard
Please contact the Infrastructure ITO qualifications@infrastructureito.org.nz if you wish to
suggest changes to the content of this unit standard.
Infrastructure ITO
SSB Code 101813
 New Zealand Qualifications Authority 2016