NZQA registered unit standard
28720 version 1
Page 1 of 3
Title
Describe civil engineering laboratory concrete tests
Level
4
Credits
8
Purpose
People credited with this unit standard are able to describe civil
engineering laboratory concrete test methods, and the
reporting requirements, meaning, and applicability of civil
engineering laboratory concrete test results.
Classification
Infrastructure Civil Engineering > Infrastructure Laboratory
Available grade
Achieved
Explanatory notes
1
Applicable legislation, regulations rules, standards and codes include but are not
limited to: the Health and Safety in Employment Act 1992; Health and Safety in
Employment Regulations 1995; Hazardous Substances and New Organisms Act
1996 and their associated regulations and subsequent amendments;
ISO/IEC 17025:2005 General requirements for the competence of testing and
calibration laboratories, available from http://www.iso.org/iso/store.htm;
NZS 3112: Parts 1-4:1986 available from http://www.standards.co.nz.
2
Evidence is required for two civil engineering laboratory concrete tests on fresh
concrete and of two civil engineering laboratory concrete tests on hardened concrete.
Concrete tests for fresh concrete may include but are not limited to – Yield, Air
Content, Slump, Spread, Unit Mass.
Concrete tests for hardened concrete may include but are not limited to –
Compression Strength, Flexural Strength, Density, Moulding of Cylinders Splitting
Tensile for hardened concrete.
3
Definitions
Organisational requirements refer to instructions to staff on policy and procedures
which are formally documented or generally accepted at the worksite. This may
include legislation; industry standards and methods; national and international
standards and methods; customer/organisation developed methods; standard
operating procedures; specifications; manuals; and manufacturer’s information.
Describe refers to stating the individual components of the test sequentially in terms
of the relevant test method and organisational requirements. Components will vary
between tests and include but are not limited to – the sample specifications,
equipment requirements, environmental requirements, units of measurement,
purpose, and scope of the test. Describe does not include the explanation of results,
the interaction between tests, or their scientific basis.
Infrastructure ITO
SSB Code 101813
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
28720 version 1
Page 2 of 3
Outcomes and evidence requirements
Outcome 1
Describe civil engineering laboratory concrete test methods.
Evidence requirements
1.1
The test method is described in terms of scope, sample requirements,
equipment, processes involved, and results.
Range
1.2
The factors that can influence the outcomes of the test are described in
accordance with organisational requirements.
Range
1.3
may include but is not limited to – equipment, apparatus, samples,
technique, calibration, environment.
may include but is not limited to – temperature, humidity,
environment, condition of sample, size of sample.
The quality assurance of the test is described in accordance with organisational
requirements.
Range
may include but is not limited to – test method, recording
requirements, checking.
Outcome 2
Describe the reporting requirements, meaning, and applicability of civil engineering
laboratory concrete test results.
Evidence requirements
2.1
The reporting requirements for test results are described in accordance with
organisational requirements.
Range
2.2
may include but is not limited to – equipment, apparatus, samples,
technique, calibration, environment, rounding, remarks.
The meaning and applicability of test results are described in accordance with
organisational requirements.
Range
Planned review date
Infrastructure ITO
SSB Code 101813
may include but is not limited to – uncertainty of measurement,
specification reliability, limitations.
31 December 2019
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
28720 version 1
Page 3 of 3
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
19 February 2015
N/A
Consent and Moderation Requirements (CMR) reference
0101
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMRs). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Comments on this unit standard
Please contact the Infrastructure ITO qualifications@infrastructureito.org.nz if you wish to
suggest changes to the content of this unit standard.
Infrastructure ITO
SSB Code 101813
 New Zealand Qualifications Authority 2016