NZQA registered Australian standard
28739 version 1
Page 1 of 3
Title
Establish and maintain the risk management system at an extractive
site
Level
6
Purpose
Credits
15
This standard comprises this cover sheet and Australian unit of
competency RIIRIS601D.
People credited with this standard are able to: plan and prepare
to establish the framework for the risk management system;
establish processes to support the risk management system;
plan and facilitate the implementation of the risk management
system; audit the management processes; and monitor
completion of records and reports, at an extractive site.
Classification
Extractive Industries > Extractive Industries Management
Available grade
Achieved
Australian Qualifications Framework Details
Unit of Competency Code
RIIRIS601D
Unit of Competency Name
Establish and maintain the risk management system
Developer
SkillsDMC
Explanatory notes
1
The Australian unit of competency can be accessed using this link RIIRIS601D
Establish and maintain the risk management system. The RII Resources and
Infrastructure Industry Training Package can be downloaded from Training.gov.au.
This standard has been listed on New Zealand’s Directory of Assessment Standards
as part of the Mutual Recognition of Vocational Education and Training Qualifications
between Australia and New Zealand, and has been endorsed by the NZ Motor
Industry Training Organisation (Inc) (MITO).
2
Memorandum of Understanding (MOU)
An MOU has been established between MITO and SkillsDMC (the Australian
National Industry Skills Council for the Resources and Infrastructure sectors). The
MOU outlines moderation in New Zealand, the granting of consent to assess against
standards to providers in New Zealand and the provision for participation of the New
Zealand industry in the review of this standard. This document can be viewed at
http://www.mito.org.nz. Further information relating to consent to assess against and
NZ Motor Industry Training Organisation
(Incorporated) (MITO)
SSB Code 101542
 New Zealand Qualifications Authority 2016
NZQA registered Australian standard
28739 version 1
Page 2 of 3
moderation of this standard is outlined in MITO’s Consent and Moderation
Requirements (CMR) 0114.
3
Performance of the outcomes of this unit standard must comply with the following.
Any new, amended or replacement Acts, regulations, standards, codes of practice,
guidelines, or authority requirements or conditions affecting this unit standard will
take precedence for assessment purposes, pending review of this unit standard.
- approved codes of practice issued pursuant to the HSE Act;
- documented workplace health, safety and environmental procedures (where these
exceed the code) for personal, product, workplace health, safety, and
environmental matters;
- obligations required under current law including:
- Health and Safety in Employment (HSE) Act 1992;
- HSE Regulations 1995;
- HSE (Mining Operations and Quarrying Operations) Regulations 2013;
- Resource Management Act 1991;
- Conservation Act 1987;
- Environment Act 1986;
- Hazardous Substances and New Organisms (HSNO) Act 1996;
- HSNO (Personnel Qualifications) Regulations 2001.
Replacement information
This unit standard replaced unit standard 23547.
Planned review date
31 December 2020
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
19 March 2015
N/A
Consent and Moderation Requirements (CMR) reference
0114
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
NZ Motor Industry Training Organisation
(Incorporated) (MITO)
SSB Code 101542
 New Zealand Qualifications Authority 2016
NZQA registered Australian standard
28739 version 1
Page 3 of 3
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Comments on this unit standard
Please contact NZ Motor Industry Training Organisation info@mito.org.nz if you wish to
suggest changes to the content of this unit standard.
NZ Motor Industry Training Organisation
(Incorporated) (MITO)
SSB Code 101542
 New Zealand Qualifications Authority 2016