NZQA registered Australian standard
26758 version 2
Page 1 of 2
Title
Conduct flotation process at an extractive site
Level
3
Purpose
Credits
15
This unit standard comprises this cover sheet and Australian
unit of competency RIIPBE310D.
People credited with this standard are able to: plan and prepare
for flotation process; start up equipment in sequence; operate
and monitor flotation equipment; shut down in sequence and/or
isolate equipment; and conduct housekeeping activities at an
extractive site.
Classification
Extractive Industries > Extractive Industries Management
Available grade
Achieved
Australian Qualifications Framework Details
Unit of Competency Code
RIIPBE310D
Unit of Competency Name
Conduct flotation process
Developer
SkillsDMC (the Australian National Industry Skills
Council for the Resources and Infrastructure sectors,
which include drilling, mining, quarrying, and civil
infrastructure)
Explanatory notes
1
The Australian unit of competency can be accessed by using this link: RIIPBE310D
Conduct flotation process. The RII Resources and Infrastructure Industry Training
Package can be downloaded from Training.gov.au. This standard has been listed on
New Zealand’s Directory of Assessment Standards as part of the Mutual Recognition
of Vocational Education and Training Qualifications between Australia and
New Zealand, and has been endorsed by the NZ Motor Industry Training
Organisation (Inc) (MITO).
2
Memorandum of Understanding (MOU)
An MOU has been established between MITO and SkillsDMC (the Australian
National Industry Skills Council for the Resources and Infrastructure sectors). The
MOU outlines moderation in New Zealand, the granting of consent to assess against
standards to providers in New Zealand and the provision for participation of the
New Zealand industry in the review of this standard. This document can be viewed
at http://www.mito.org.nz. Further information relating to consent to assess against
NZ Motor Industry Training Organisation
(Incorporated) (MITO)
SSB Code 1015425
 New Zealand Qualifications Authority 2016
NZQA registered Australian standard
26758 version 2
Page 2 of 2
and moderation of this standard is outlined in MITO’s Consent and Moderation
Requirements (CMR) 0114.
3
All workplace practices must meet recognised codes of practice, documented
workplace health, safety and environmental procedures (where these exceed the
code) for personal, product, workplace health, safety, and environmental matters,
and the obligations required under current law including: the Health and Safety in
Employment (HSE) Act 1992; HSE Regulations 1995; HSE (Mining Operations and
Quarrying Operations) Regulations 2013; Resource Management Act 1991;
Conservation Act 1987; Environment Act 1986; Hazardous Substances and New
Organisms (HSNO) Act 1996; HSNO (Personnel Qualifications) Regulations 2001;
and their subsequent amendments.
Planned review date
31 December 2019
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
19 November 2010
31 December 2017
Review
2
18 June 2015
N/A
Consent and Moderation Requirements (CMR) reference
0114
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Comments on this standard
Please contact the NZ Motor Industry Training Organisation (Incorporated) (MITO)
info@mito.org.nz if you wish to suggest changes to the content of this unit standard.
NZ Motor Industry Training Organisation
(Incorporated) (MITO)
SSB Code 1015425
 New Zealand Qualifications Authority 2016