Template # 1006 Rev. 3: 03/01/13 Transfer Model Curriculum (TMC) Template for Art History CCC Major or Area of Emphasis: Art History TOP Code: 100100 CSU Major(s): Studio Art – Art with an Emphasis or Concentration in Art History Total Units: 18-20 (all units are semester units) In the four columns to the right under the College Program Requirements, enter the college’s course identifier, title and the number of units comparable to the course indicated for the TMC. If the course may be double-counted with either CSU-GE or IGETC, enter the GE Area to which the course is articulated. To review the GE Areas and associated unit requirements, please go to Chancellor’s Office Academic Affairs page, RESOURCE section located at: http://extranet.cccco.edu/Divisions/AcademicAffairs/CurriculumandInstructionUnit/TransferModelCurriculum.aspx or the ASSIST website: http://web1.assist.org/web-assist/help/help-csu_ge.html. The units indicated in the template are the minimum semester units required for the prescribed course or list. All courses must be CSU transferable. At a minimum, where there is an indicated C-ID Descriptor in the REQUIRED CORE and LIST A, the course must have been submitted to C-ID prior to completing the Associate Degree for Transfer (ADT) proposal for Chancellor’s Office approval. Where no C-ID Descriptor is indicated, discipline faculty should compare their existing course to the example course(s) provided in the TMC at: http://www.c-id.net/degreereview.html and attach the appropriate ASSIST documentation as follows: Articulation Agreement by Major (AAM) demonstrating lower division preparation in the major at a CSU; CSU Baccalaureate Level Course List by Department (BCT) for the transfer courses; and/or, CSU GE Certification Course List by Area (GECC). The acronyms AAM, BCT, and GECC will appear in C-ID Descriptor column directly next to the course to indicate which report will need to be attached to the proposal to support the course’s inclusion in the transfer degree. To access ASSIST, please go to http://www.assist.org. Associate in Arts in Art History for Transfer Degree College Name: TRANSFER MODEL CURRICULUM (TMC) Course Title (units) REQUIRED CORE: (9 units) Survey of Western Art from Prehistory through the Middle Ages (3) C-ID Descriptor COLLEGE PROGRAM REQUIREMENTS Course ID ARTH 110 Art 2 Survey of Western Art from Renaissance to Contemporary (3) ARTH 120 Art 3 Fundamentals of Drawing (3) ARTS 110 Art 20 LIST A: Select one (3 units) Survey of Asian Art (3) Art of Africa, Oceania, and Indigenous North Americas (3) Any CSU transferable non-western Art History course. LIST B: Select one (3 units) 2-D Foundations (3) 3-D Foundations (3) Figure Drawing (3) Introduction to Digital Arts (3) Introduction to Ceramics (3) Introduction to Photography (3) Sculpture (3) Course Title Units History of Western Art Prehistory through the Middle Ages History of Western Art Renaissance to Contemporary Beginning Drawing and Composition 3 Art 122 World Art 3 Art 46 Art 47 Two Dimensional Design Three Dimensional Design 3 3 3 3 ARTH 130 ARTH 140 BCT ARTS 100 ARTS 101 ARTS 200 ARTS 250 ARTS 230 ARTS 260 ARTS 240 CSU GE/ IGETC Area CSU C1/IGE TC 3A CSU C1/IGE TC 3A Any Studio Arts course articulated as CSU GE OR Any course articulated as lower division preparation in Studio Arts or similar major at a CSU. LIST C: Select one (3-5 units) Any course from LIST A or B not already used. Any CSU transferable Art History course (note: Except ARTH 100 – Art Appreciation) GECC Art 22 Intermediate Drawing and Composition 3 BCT Art 4 History of Modern Art 3 Any Art or Humanities course articulated as CSU GE Area C1 or IGETC Area 3A. GECC Art 1 Introduction to Art History 3 Any course articulated as CSU GE Area C2 or IGETC Area 3B in: a language other than English (except ASL); Art, History, Humanities, Philosophy, Religion/Religious Studies, or The History of Costume. Any course articulated as CSU GE Area D1, D3, D4, or D6 or IGETC Area 4. GECC Human 1 Introduction to the Humanities 3 Philo 1 Introduction to Philosophy Total Units for the Major: 18-20 AAM 3 CSU C1/IGE TC 3A CSU C1/IGE TC 3A CSU C2/IGE TC 3B GECC Total Units for the Major: 18 Total Units that may be double-counted (Ensure that the total for each Area does not exceed the 18 limit for the specific Area) General Education (CSU GE or IGETC) Units Elective (CSU Transferable) Units Total Degree Units (maximum) 37-39 15 60 Template #1007 Rev. #6: 03/01/13 Transfer Model Curriculum (TMC) Template for English CCC Major or Area of Emphasis: English TOP Code: 150100 CSU Major(s): English; English Literature; Creative Writing Total Units: 18-20 (all units are semester units) In the four columns to the right under the College Program Requirements, enter the college’s course identifier, title and the number of units comparable to the course indicated for the TMC. If the course may be double-counted with either CSU-GE or IGETC, enter the GE Area to which the course is articulated. To review the GE Areas and associated unit requirements, please go to Chancellor’s Office Academic Affairs page, RESOURCE section located at : http://extranet.cccco.edu/Divisions/AcademicAffairs/CurriculumandInstructionUnit/TransferModelCurriculum.aspx or the ASSIST website: http://web1.assist.org/web-assist/help/help-csu_ge.html. The units indicated in the template are the minimum semester units required for the prescribed course or list. All courses must be CSU transferable. At a minimum, where there is an indicated C-ID Descriptor in the REQUIRED CORE and LIST A, the course must have been submitted to C-ID prior to completing the Associate Degree for Transfer (ADT) proposal for Chancellor’s Office approval. Where no C-ID Descriptor is indicated, discipline faculty should compare their existing course to the example course(s) provided in the TMC at: http://www.c-id.net/degreereview.html and attach the appropriate ASSIST documentation as follows: Articulation Agreement by Major (AAM) demonstrating lower division preparation in the major at a CSU; CSU Baccalaureate Level Course List by Department (BCT) for the transfer courses; and/or, CSU GE Certification Course List by Area (GECC). The acronyms AAM, BCT, and GECC will appear in C-ID Descriptor column directly next to the course to indicate which report will need to be attached to the proposal to support the course’s inclusion in the transfer degree. To access ASSIST, please go to http://www.assist.org. Associate in Arts in English for Transfer Degree College Name: TRANSFER MODEL CURRICULUM (TMC) Course Title (units) REQUIRED CORE: (4-8 units) Option 1: Select two (6-8 units) Argumentative Writing and Critical Thinking (3-4) Introduction to Literature (3-4) OR Option 2: Select one (4 units) Argumentative Writing and Critical Thinking Through Literature (4) LIST A: Select two (6 units) American Literature I (3) C-ID Descriptor COLLEGE PROGRAM REQUIREMENTS Course ID Course Title Units CSU GE/ IGETC Area ENGL 105 ENGL 005 Critical Thinking 3 1, A ENGL 120 ENGL 001B Composition and Reading 4 1, A ENGL 110 N/A ENGL 130 ENGL 030A ENGL 030B Introduction to American Literature I Introduction to American Literature II 3 3, C 3 3, C American Literature II (3) ENGL 135 British Literature I (3) British Literature II (3) World Literature I (3) World Literature II (3) LIST B: Select courses based on option chosen in REQUIRED CORE: Option 1: 3 units ENGL 160 ENGL 165 ENGL 140 ENGL 145 Option 2: 6 units Any courses from LIST A not already used. Any English course articulated as lower division preparation in the English major at a CSU. Introductory Creative Writing (3) LIST C: Select one (3 units) Any course from LIST A or B not already used. Any CSU transferable English course. Any language course other than English that is articulated to fulfill CSU-GE Area C or IGETC Area 3A and 3B. Any CSU transferable literature course offered in another department. Introduction to Reporting News Writing (3) OR Introduction to Journalism (3) Business Communication (3) Oral Interpretation of Literature (3) Introductory Humanities (3) Introductory Theatre (3) Introductory Linguistics (3) Total Units for the Major: AAM ENGL 200 BCT ENGL 047 Children’s Literature 3 C ENGL 010A Introduction to Creative Writing 3 C ENGL 079 Introduction to LGBTQ Literature 3 C Total Units for the Major: 19 GECC BCT JOUR 110 BCT BUS 115 COMM 170 BCT THTR 111 BCT 18-20 Total Units that may be double-counted (Ensure that the total for each Area does not exceed the 19 limit for the specific Area) General Education (CSU GE or IGETC) Units Elective (CSU Transferable) Units Total Degree Units (maximum) 37-39 2-4 60 Transfer Model Curriculum (TMC) Template for Political Science Template # 1009 CCC Major or Area of Emphasis: Political Science Rev. 4: 03/01/13 TOP Code: 220700 CSU Major(s): Political Science Total Units: 18 (all units are semester units) In the four columns to the right under the College Program Requirements, enter the college’s course identifier, title and the number of units comparable to the course indicated for the TMC. If the course may be double-counted with either CSU-GE or IGETC, enter the GE Area to which the course is articulated. To review the GE Areas and associated unit requirements, please go to Chancellor’s Office Academic Affairs page, RESOURCE section located at: http://extranet.cccco.edu/Divisions/AcademicAffairs/CurriculumandInstructionUnit/TransferModelCurriculum.aspx or the ASSIST website: http://web1.assist.org/web-assist/help/help-csu_ge.html. The units indicated in the template are the minimum semester units required for the prescribed course or list. All courses must be CSU transferable. At a minimum, where there is an indicated C-ID Descriptor in the REQUIRED CORE and LIST A, the course must have been submitted to C-ID prior to completing the Associate Degree for Transfer (ADT) proposal for Chancellor’s Office approval. Where no C-ID Descriptor is indicated, discipline faculty should compare their existing course to the example course(s) provided in the TMC at: http://www.c-id.net/degreereview.html and attach the appropriate ASSIST documentation as follows: Articulation Agreement by Major (AAM) demonstrating lower division preparation in the major at a CSU; CSU Baccalaureate Level Course List by Department (BCT) for the transfer courses; and/or, CSU GE Certification Course List by Area (GECC). The acronyms AAM, BCT, and GECC will appear in C-ID Descriptor column directly next to the course to indicate which report will need to be attached to the proposal to support the course’s inclusion in the transfer degree. To access ASSIST, please go to http://www.assist.org. Associate of Arts in Political Science for Transfer Degree College Name: College of Alameda TRANSFER MODEL CURRICULUM (TMC) Course Title (units) COLLEGE PROGRAM REQUIREMENTS C-ID Descriptor Course ID Course Title Units CSU GE/ IGET C Area REQUIRED CORE: (6 units) Introduction to American Government and Politics (3) POLS 110 POSCI-01 Introduction to Political Theory and Thought (3) LIST A: Select two (6 units) Introduction to Comparative Government and Politics (3) Introduction to International Relations (3) Introduction to Political Science Research Methods (3) OR Introduction to Statistics (3) LIST B: Select two (6 units) Any course from LIST A not already used. Any CSU transferable Political Science course. POLS 120 POSCI-04 POLS 130 POLS 140 POLS 160 POSCI-02 POSCI-03 SOC-120 STAT 120 (TCSU) MATH-13 Any CSU transferable introductory courses in the social sciences (i.e., articulated as fulfilling CSU GE Area D or IGETC Area 4). BCT POSCI-06 BCT OR POSCI-26 POSCI-31 GECC HIST-18 SOC-01 SOC-02 Total Units for the Major: 18 Government and Politics in the United States Political Theory 3 D/4 3 D/4 Comparative Government International Relations Introduction to Research Methods OR Introduction to Statistics 3 3 3 D/4 D/4 3 B/2 The U.S. Constitution and Criminal Due Process 3 D/4 U.S. and California Constitution Introduction to Public Administration 20th Century American Protest Movements 3 3 D/4 D/4 3 D/4 3 3 D/4 D/4 Introduction to Sociology Social Problems Total Units for the Major: sum Total Units that may be double-counted (Ensure that the total for each Area does not exceed the limit for the specific Area) General Education (CSU GE or IGETC) Units Elective (CSU Transferable) Units Total Degree Units (maximum) 18 sum 37-39 sum 60 Template # 1006 Rev. 3: 03/01/13 Transfer Model Curriculum (TMC) Template for Art History CCC Major or Area of Emphasis: Art History TOP Code: 100100 CSU Major(s): Studio Art – Art with an Emphasis or Concentration in Art History Total Units: 18-20 (all units are semester units) In the four columns to the right under the College Program Requirements, enter the college’s course identifier, title and the number of units comparable to the course indicated for the TMC. If the course may be double-counted with either CSU-GE or IGETC, enter the GE Area to which the course is articulated. To review the GE Areas and associated unit requirements, please go to Chancellor’s Office Academic Affairs page, RESOURCE section located at : http://extranet.cccco.edu/Divisions/AcademicAffairs/CurriculumandInstructionUnit/TransferModelCurriculum.aspx or the ASSIST website: http://web1.assist.org/web-assist/help/help-csu_ge.html. The units indicated in the template are the minimum semester units required for the prescribed course or list. All courses must be CSU transferable. At a minimum, where there is an indicated C-ID Descriptor in the REQUIRED CORE and LIST A, the course must have been submitted to C-ID prior to completing the Associate Degree for Transfer (ADT) proposal for Chancellor’s Office approval. Where no C-ID Descriptor is indicated, discipline faculty should compare their existing course to the example course(s) provided in the TMC at: http://www.c-id.net/degreereview.html and attach the appropriate ASSIST documentation as follows: Articulation Agreement by Major (AAM) demonstrating lower division preparation in the major at a CSU; CSU Baccalaureate Level Course List by Department (BCT) for the transfer courses; and/or, CSU GE Certification Course List by Area (GECC). The acronyms AAM, BCT, and GECC will appear in C-ID Descriptor column directly next to the course to indicate which report will need to be attached to the proposal to support the course’s inclusion in the transfer degree. To access ASSIST, please go to http://www.assist.org. Associate in Arts in Art History for Transfer Degree College Name: TRANSFER MODEL CURRICULUM (TMC) Course Title (units) REQUIRED CORE: (9 units) Survey of Western Art from Prehistory through the Middle Ages (3) Survey of Western Art from Renaissance to Contemporary (3) Fundamentals of Drawing (3) LIST A: Select one (3 units) Survey of Asian Art (3) Art of Africa, Oceania, and Indigenous North Americas (3) Any CSU transferable non-western Art History course. LIST B: Select one (3 units) 2-D Foundations (3) 3-D Foundations (3) Figure Drawing (3) Introduction to Digital Arts (3) Introduction to Ceramics (3) Introduction to Photography (3) Sculpture (3) Any Studio Arts course articulated as CSU GE C-ID Descriptor ARTH 110 ARTH 120 ARTS 110 ARTH 130 ARTH 140 BCT ARTS 100 ARTS 101 ARTS 200 ARTS 250 ARTS 230 ARTS 260 ARTS 240 GECC COLLEGE PROGRAM REQUIREMENTS Course ID Course Title Units CSU GE/ IGETC Area OR Any course articulated as lower division preparation in Studio Arts or similar major at a CSU. LIST C: Select one (3-5 units) Any course from LIST A or B not already used. Any CSU transferable Art History course (note: Except ARTH 100 – Art Appreciation) Any Art or Humanities course articulated as CSU GE Area C1 or IGETC Area 3A. Any course articulated as CSU GE Area C2 or IGETC Area 3B in: a language other than English (except ASL); Art, History, Humanities, Philosophy, Religion/Religious Studies, or The History of Costume. Any course articulated as CSU GE Area D1, D3, D4, or D6 or IGETC Area 4. Total Units for the Major: AAM BCT GECC GECC GECC 18-20 Total Units for the Major: sum Total Units that may be double-counted (Ensure that the total for each Area does not exceed the sum limit for the specific Area) General Education (CSU GE or IGETC) Units Elective (CSU Transferable) Units Total Degree Units (maximum) 37-39 sum 60 Transfer Model Curriculum: Studio Arts June 20, 2011 – Updated December 4, 2012 CCC Major: CSU Major or Majors: Studio Art BA in Art, Studio Art Total units: 24 (18 effective units with ARTH courses double-counted for 6 units in CSU GE, C-1) Degree Type: AA-T ___ Core Courses (12) Complete the following courses to total 12 units Title (units) C-ID Designation Art History: Survey of Western Art from Renaissance to Contemporary (3) ARTH 120 2-D Foundations (3) ARTS 100 3-D Foundations (3) ARTS 101 Fundamentals of Drawing (3) ARTS 110 Rationale: Required / Restricted Elective at Lower Division in CSU system CSU GE C-1 List A: Art History Restricted Electives (3) Select one course to total 3 units from the following: Title (units) C-ID Designation Rationale: Art History: Survey of Western Art from Prehistory through the Middle Ages (3) ARTH 110 CSU GE C-1 Survey of Asian Art (3) ARTH 130 CSU GE C-1 Art of Africa, Oceania, and CSU GE C-1 ARTH 140 Indigenous North Americas (3) Any other Art History survey articulated for lower division Course should count towards CSU GE C-1. major preparation. Art Appreciation courses do not count towards this requirement. (3) List B: Studio Arts Restricted Electives (9): Select one course from any three of the following areas for a maximum of nine units: *Curricular Area Course Title (units) C-ID Designatio n Figure Drawing (3) or ARTS 200 Intermediate Drawing (3) ARTS 205 Drawing Painting Printmaking Ceramics Sculpture Digital Art Photograph y Introduction to Painting (3) Introduction to Printmaking (3) Introduction to Ceramics (3) Introduction to Sculpture (3) Introduction to Digital Art (3) Introduction to Photography (3) ARTS 210 ARTS 220 ARTS 230 ARTS 240 ARTS 250 ARTS 260 Rationale: While this is, technically, a 2nd semester course – it does not count as a “second semester” option for the drawing medium. Color Color Theory (3) Applied Design Introduction to Crafts (3) or Introduction to Jewelry and Metalsmithing (3) or Introduction to Fiber Arts (3) ARTS 270 ARTS 280 ARTS 281 ARTS 282 Other Media Varies N/A Courses articulated as lower division major preparation for the Studio Arts major in curricular areas not represented above. Second Semester Varies N/A Second-semester courses in the above curricular areas articulated as required lower division major preparation for a particular area of emphasis within the major. *Any other local Studio Arts course within these curricular areas may be used that is CSU transferable and articulated as lower division major preparation for the Studio Arts major. (3) Local Degree Development Notes: Local degrees may not mandate that a student take any course that is not either articulated as general education or articulated as lower division major preparation for the Studio Arts major at a CSU. Additionally, not every local campus will offer all courses or course categories listed on the TMC. Student Advising Notes: Students must be carefully directed into appropriate elective course choices to match their intended area of focus upon transfer, e.g. Painting, Printmaking, Sculpture, Photography, etc. as not all elective choices are appropriate for every area. Local TMC-aligned degree descriptions and patterns should provide adequate direction on course choices for students to ensure that they take the lower division courses prerequisite to upper division courses in their area of emphasis. Additionally, in some instances students may be better prepared for transfer into specific CSU programs by taking courses beyond the 60 units required for this degree. Template # 2003 Transfer Model Curriculum (TMC) Template for Early Childhood Education Rev. 1: 03/01/13 CCC Major or Area of Emphasis: Early Childhood Education TOP Code: 130500 CSU Major(s): Child Development; Child and Adolescent Development; Human Development; Education Total Units: 24 (all units are semester units) In the four columns to the right under the College Program Requirements, enter the college’s course identifier, title and the number of units comparable to the course indicated for the TMC. If the course may be double-counted with either CSU-GE or IGETC, enter the GE Area to which the course is articulated. To review the GE Areas and associated unit requirements, please go to Chancellor’s Office Academic Affairs page, RESOURCE section located at: http://extranet.cccco.edu/Divisions/AcademicAffairs/CurriculumandInstructionUnit/TransferModelCurriculum.aspx or the ASSIST website: http://web1.assist.org/web-assist/help/help-csu_ge.html. The units indicated in the template are the minimum semester units required for the prescribed course or list. All courses must be CSU transferable. All courses must be submitted to C-ID prior to completing the Associate Degree for Transfer (ADT) proposal for Chancellor’s Office approval. Associate in Science in Early Childhood Education for Transfer Degree College Name: TRANSFER MODEL CURRICULUM (TMC) Course Title (units) REQUIRED CORE: (24 units) Child Growth and Development (3) Child, Family and Community (3) Principles and Practices of Teaching Young Children (3) Introduction to Curriculum (3) Observation and Assessment (3) Practicum in Early Childhood Education (3) Health, Safety and Nutrition (3) Teaching in a Diverse Society (3) Total Units for the Major: COLLEGE PROGRAM REQUIREMENTS C-ID Descriptor Course ID Course Title Units Total Units for the Major: sum CSU GE/ IGETC Area CDEV 100 CDEV 110 ECE 120 ECE 130 ECE 200 ECE 210 ECE 220 ECE 230 24 Total Units that may be double-counted (Ensure that the total for each Area does not exceed the sum limit for the specific Area) General Education (CSU GE or IGETC) Units Elective (CSU Transferable) Units Total Degree Units (maximum) 37-39 sum 60 Template Date: 06/30/11 Rev. 1: 04/11/12; Rev. 2: 07/18/12