NZQA registered unit standard
4001 version 5
Page 1 of 4
Title
Maintain aircraft engine ignition systems
Level
4
Credits
4
Purpose
People credited with this unit standard are able to: prepare to
maintain aircraft engine ignition systems; locate defects in
engine ignition systems; restore airworthiness of engine ignition
systems; and complete finishing activities related to maintaining
aircraft engine ignition systems.
Classification
Aeronautical Engineering > Aircraft Powerplant Maintenance
Available grade
Achieved
Explanatory notes
1
All tasks are to be carried out in accordance with enterprise procedures, the
enterprise being the organisation carrying out the work. Enterprise procedures
referred to in this unit standard are the applicable procedures found in the following:
enterprise exposition; manufacturer publications; Government and local body
legislation; airworthiness authority requirements.
2
The maintenance activities referred to in this unit standard are those normally carried
out on an aircraft in a hangar.
3
Range
aircraft engine ignition systems include gas turbine or reciprocating systems.
4
The scope of the system that this standard relates to is described in ATA iSpec 2200,
chapter 74.
Outcomes and evidence requirements
Outcome 1
Prepare to maintain aircraft engine ignition systems.
Evidence requirements
1.1
Task is determined by reviewing maintenance documentation and enterprise
procedures.
1.2
Resources are obtained and checked for serviceability in accordance with
enterprise procedures.
Range
ServiceIQ
SSB Code 9068
publications, tools, equipment, safety equipment, materials.
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
4001 version 5
Page 2 of 4
1.3
Aircraft registration and system to be maintained are matched with
documentation.
1.4
Aircraft and system are prepared for the application of power and system
operation in accordance with enterprise procedures.
Range
1.5
may include but is not limited to – cockpit controls match
component positions, clearances, isolation tags, warning signs.
Ground and/or support equipment is positioned ready for aircraft engine ignition
systems maintenance activities in accordance with enterprise procedures.
Outcome 2
Locate defects in engine ignition systems.
Evidence requirements
2.1
Serviceability is determined in accordance with enterprise procedures.
Range
2.2
inspect, assess, test.
Defects are reported and documented in accordance with enterprise
procedures.
Outcome 3
Restore airworthiness of engine ignition systems.
Evidence requirements
3.1
Methods of rectifying defects are determined in accordance with enterprise
procedures.
3.2
Replacement parts are procured and verified as authentic and serviceable in
accordance with enterprise procedures.
Range
3.3
identify, inspect.
Defects are rectified in accordance with enterprise procedures.
Range
may include but is not limited to – repair, replace, modify, adjust,
calibrate, lubricate.
3.4
Aircraft engine ignition systems are tested to verify serviceability in accordance
with enterprise procedures.
3.5
Inspections are obtained in accordance with enterprise procedures.
ServiceIQ
SSB Code 9068
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
4001 version 5
Page 3 of 4
Outcome 4
Complete finishing activities related to maintaining aircraft engine ignition systems.
Evidence requirements
4.1
Completion activities specific to the task and work area are carried out in
accordance with enterprise procedures.
activities may include but are not limited to – tool control,
cleanliness, tidiness, return of publications, systems and aircraft
left ready for next activity.
Range
4.2
Resources are checked for serviceability and returned to service or storage in
accordance with enterprise procedures.
Range
4.3
tools, equipment, safety equipment.
Leftover parts and materials are disposed of in accordance with enterprise
procedures.
Range
4.4
serviceable, unserviceable, surplus, waste, scrap, hazardous.
Documentation is completed in accordance with enterprise procedures.
Planned review date
31 December 2018
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
19 June 1995
31 December 2016
Revision
2
7 August 1997
31 December 2016
Revision
3
8 May 2001
31 December 2016
Review
4
25 September 2006
31 December 2016
Review
5
17 July 2014
N/A
Consent and Moderation Requirements (CMR) reference
0028
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
ServiceIQ
SSB Code 9068
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
4001 version 5
Page 4 of 4
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Comments on this unit standard
Please contact ServiceIQ qualifications@serviceiq.org.nz if you wish to suggest changes
to the content of this unit standard.
ServiceIQ
SSB Code 9068
 New Zealand Qualifications Authority 2016