NZQA registered unit standard 17667 version 3 Page 1 of 4 Title Repair and/or overhaul aircraft armament pneumatic system components Level 4 Credits 12 Purpose People credited with this unit standard are able to: prepare to repair and/or overhaul aircraft armament pneumatic system components; repair and/or overhaul aircraft armament pneumatic system components; and complete tasks related to the repair and/or overhaul of aircraft armament pneumatic system components. Classification Aeronautical Engineering > Aeronautical Armament Available grade Achieved Explanatory notes All tasks are to be carried out in accordance with enterprise procedures, the enterprise being the organisation carrying out the work. Enterprise procedures referred to in this unit standard are the applicable procedures found in the following: enterprise exposition, and repair and overhaul manuals; Government and local body legislation; airworthiness authority requirements. Outcomes and evidence requirements Outcome 1 Prepare to repair and/or overhaul aircraft armament pneumatic system components. Evidence requirements 1.1 Task is determined by reviewing documentation and manuals in accordance with enterprise procedures. 1.2 Component serial and part numbers are matched with documentation in accordance with enterprise procedures. 1.3 Resources are obtained and checked for serviceability or status in accordance with enterprise procedures. Range 1.4 manuals, materials, tools, equipment, safety equipment, work area selected for task, prepared and cleaned. Component defects are located prior to disassembly in accordance with enterprise procedures. ServiceIQ SSB code 9068 New Zealand Qualifications Authority 2016 NZQA registered unit standard Range 17667 version 3 Page 2 of 4 any explosives removed, inspected, troubleshooting carried out, tested, economics of carrying out repair and/or overhaul assessed. Outcome 2 Repair and/or overhaul aircraft armament pneumatic system components. Evidence requirements 2.1 Components are disassembled in accordance with enterprise procedures. Range disassembled, cleaned, inspected, labelled, preserved, segregated. 2.2 Defects found during disassembly are reported and/or recorded in accordance with enterprise procedures. 2.3 Rectification action is determined, confirmed, and recorded in accordance with enterprise procedures. Range 2.4 repair, overhaul, replace, modify, adjust, scrap; obtain confirmation of action to be taken from supervisor, record action to be taken. Replacement parts are procured and verified as authentic and serviceable in accordance with enterprise procedures. Range identify, inspect. 2.5 Component defects are rectified in accordance with enterprise procedures. 2.6 Components are assembled in accordance with enterprise procedures. 2.7 Components are tested and adjusted in accordance with enterprise procedures. 2.8 Supervisory inspections are obtained in accordance with enterprise procedures. Outcome 3 Complete tasks related to the repair and/or overhaul of aircraft armament pneumatic system components. Evidence requirements 3.1 Components are prepared for use, storage, and transit in accordance with enterprise procedures. Range 3.2 locked, inhibited, blanked, packed. Resources are checked for serviceability and returned to service or storage in accordance with enterprise procedures. ServiceIQ SSB code 9068 New Zealand Qualifications Authority 2016 NZQA registered unit standard Range 3.3 manuals, tools, equipment, safety equipment. Leftover parts and materials are disposed of in accordance with enterprise procedures. may include but is not limited to – serviceable, unserviceable, surplus, waste, scrap, hazardous. Range 3.4 Documentation is completed in accordance with enterprise procedures. may include but is not limited to – labels, work orders, log books, shelf-life requirements recorded, certification obtained. Range 3.5 17667 version 3 Page 3 of 4 Work area is left in a clean and tidy state in accordance with enterprise procedures. Planned review date 31 December 2018 Status information and last date for assessment for superseded versions Process Version Date Last Date for Assessment Registration 1 19 October 2000 31 December 2016 Review 2 26 March 2007 31 December 2016 Review 3 24 October 2014 N/A Consent and Moderation Requirements (CMR) reference 0028 This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do. Please note Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment. Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards. Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards. Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMR). The CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements. ServiceIQ SSB code 9068 New Zealand Qualifications Authority 2016 NZQA registered unit standard 17667 version 3 Page 4 of 4 Comments on this unit standard Please contact ServiceIQ qualifications@serviceiq.org.nz if you wish to suggest changes to the content of this unit standard. ServiceIQ SSB code 9068 New Zealand Qualifications Authority 2016