NZQF NQ Ref Version 1310 Page 1 of 8 5 National Certificate in Wood Fibre Manufacturing (Wood Panels) with strands in Composite Panel Manufacturing, Overlay Bonding, and Laminated Veneer Lumber (LVL) and Plywood Manufacturing Level 4-5 Credits 50-115 This qualification has been reviewed. The last date to meet the requirements is 31 December 2018. Transition Arrangements The last date for enrolments into Ref: 1310 is 31 December 2015. The last date for assessments to take place for this qualification is 31 December 2018. It is anticipated that no existing candidates will be disadvantaged by these transition arrangements. However, anyone who feels that they have been disadvantaged may appeal to Competenz at the address below. Appeals will be considered on a case-by-case basis. For detailed information see Review Summaries on the NZQA website. NZQF National Qualification Registration Information Process Registration Review Review Review Review Version 1 2 3 4 5 Date July 2007 May 2009 July 2010 July 2011 October 2014 Last Date for Assessment December 2012 December 2013 December 2013 December 2018 December 2018 Standard Setting Body Competenz PO Box 9005 Newmarket Auckland 1149 Telephone Fax Email Website 0800 526 1800 09 539 9899 qualifications@competenz.org.nz www.competenz.org.nz Competenz SSB Code 101571 New Zealand Qualifications Authority 2016 NZQF NQ Ref Version 1310 5 Page 2 of 8 National Certificate in Wood Fibre Manufacturing (Wood Panels) with strands in Composite Panel Manufacturing, Overlay Bonding, and Laminated Veneer Lumber (LVL) and Plywood Manufacturing Level 4-5 Credits 50-115 Purpose This qualification recognises the skills and knowledge required of advanced operators in the wood fibre (Wood Panels) manufacturing industries. The Core Elective section provides options to demonstrate skills in leading process improvement and to demonstrate understanding of the costs involved in production. This section also recognises skills required by employees in the wood fibre manufacturing industries at the advanced operator level to ensure they can perform their duties responsibly, safely, and efficiently; and proactively contribute to the improvement of product and process performance. It also shares standards in common with the National Certificate in Solid Wood Manufacturing (Advanced) with strands in Laminated Veneer Lumber (LVL) and Plywood Manufacturing, Sawmilling, Timber Drying, Timber Grading, and Timber Treatment [Ref: 1307] that recognise a common set of skills required by employees across the wood manufacturing industries at the advanced operator level. This qualification’s strands recognise the competencies required to work in a range of advanced roles in wood fibre manufacturing (wood panels), including management of the technical aspects of: composite panel manufacturing, laminated veneer lumber (LVL) and plywood manufacturing, and of overlay bonding and product testing. Depending on the strand, the skills and knowledge covered may also include troubleshooting and production planning and control. This qualification allows the advanced operator to combine the technical competencies in one of the strands with the leadership, process improvement, and cost knowledge skills in the Core Elective section in order to be instrumental in driving the industry to greater costeffectiveness and production efficiency. This qualification follows on from the National Certificate in Wood Fibre Manufacturing (Wood Panels) (Level 3) with strands in Composite Panel Preparation, Composite Panel Forming and Pressing, Composite Panel Finishing, Overlay Bonding Operations, Laminated Veneer Lumber (LVL) and Plywood Operations, and Veneer Preparation [Ref: 1309]. This qualification can lead to the National Certificate in Competitive Manufacturing (Level 4) with an optional strand in Facilitation [Ref: 1216]. Competenz SSB Code 101571 New Zealand Qualifications Authority 2016 NZQF NQ Ref 1310 Version Page 3 of 8 5 Replacement Information This qualification replaced the National Certificate in Pulp and Paper Manufacturing (Level 4) [Ref: 0239]; and part of the National Certificate in Wood Panels Manufacturing (Level 4) [Ref: 0254]. Special Notes It is recommended that, before commencing the Composite Panel Manufacturing Strand of this qualification, candidates hold the National Certificate in Wood Fibre Manufacturing (Wood Panels) (Level 3) with the strand in Composite Panel Forming and Pressing, and one other Composite Panel strand [Ref: 1309]. It is recommended that, before commencing the Laminated Veneer Lumber (LVL) and Plywood Manufacturing Strand of this qualification, candidates hold the National Certificate in Wood Fibre Manufacturing (Wood Panels) (Level 3) with the strand in Laminated Veneer Lumber (LVL) and Plywood Operations [Ref: 1309]. It is recommended that before commencing the Overlay Bonding Strand of this qualification, candidates hold the National Certificate in Wood Fibre Manufacturing (Wood Panels) (Level 3) with the strand in Overlay Bonding Operations [Ref: 1309]. It is also recommended that candidates hold a current first aid certificate or are credited with the following first aid standards – Unit 26551, Provide first aid for life threatening conditions; Unit 26552, Demonstrate knowledge of common first aid conditions and how to respond to them. Credit Range Level 3 credits Level 4 credits Total Core Elective 0-5 10-15 15 Level 3 credits Level 4 credits Level 5 credits Minimum totals Qualification total with strand Composite Panel Manufacturing Strand C E 0-10 0-5 30 10-20 30 25 70 Competenz SSB Code 101571 Overlay Bonding Strand C 20 20 E 15-25 15 50 New Zealand Qualifications Authority 2016 NZQF NQ Ref Version 1310 Level 3 credits Level 4 credits Level 5 credits Minimum totals Qualification total with strand Page 4 of 8 5 Laminated Veneer Lumber (LVL) and Plywood Manufacturing Strand C 20 30 50 100 115 Requirements for Award of Qualification Award of NZQF National Qualifications Credit gained for a standard may be used only once to meet the requirements of this qualification. Unit standards and achievement standards that are equivalent in outcome are mutually exclusive for the purpose of award. The table of mutually exclusive standards is provided on the New Zealand Qualifications Authority (NZQA) website: http://www.nzqa.govt.nz/qualifications-standards/standards/standards-exclusionlist/. Reviewed standards that continue to recognise the same overall outcome are registered as new versions and retain their identification number (ID). Any version of a standard with the same ID may be used to meet qualification requirements that list the ID and/or that specify the past or current classification of the standard. Summary of Requirements Core Elective – A minimum of 15 credits as specified One of the following strands is required Composite Panel Manufacturing Strand Overlay Bonding Strand Laminated Veneer Lumber (LVL) and Plywood Manufacturing Strand Detailed Requirements Core Elective A minimum of 15 credits Manufacturing > Wood Manufacturing - Generic Skills > Wood Manufacturing Coordination ID Title Level Credit 27073 Lead an investigation into wood manufacturing production issues 4 15 Manufacturing > Wood Manufacturing - Generic Skills > Wood Manufacturing Foundation Skills ID Title Level Credit 17970 Explain wood manufacturing cost factors influencing profitability and sustainability Competenz SSB Code 101571 4 10 New Zealand Qualifications Authority 2016 NZQF NQ Ref 1310 Version Page 5 of 8 5 ID Title Level Credit 19795 Analyse a budget in a wood manufacturing workplace 3 5 Manufacturing > Wood Manufacturing - Generic Skills > Wood Panel Manufacturing Skills ID Title Level Credit 701 Test wood panels and constituent materials 4 10 Composite Panel Manufacturing Strand Meet the requirements of all of the following sets Composite Panel Manufacturing Strand Compulsory Composite Panel Manufacturing Strand Elective Composite Panel Manufacturing Strand Compulsory The following standard is required Manufacturing > Wood Fibre Manufacturing > Composite Wood Panel Manufacturing ID Title Level Credit 21477 Troubleshoot composite wood panel manufacture 5 30 Composite Panel Manufacturing Strand Elective A minimum of 25 credits Manufacturing > Wood Manufacturing - Generic Skills > Wood Manufacturing Coordination ID Title Level Credit 22980 Explain production planning and control procedures used in a wood manufacturing operation 4 5 Manufacturing > Wood Manufacturing - Generic Skills > Wood Manufacturing Foundation Skills ID Title Level Credit 17869 Demonstrate knowledge of fundamentals of process controls used in wood manufacturing industries 3 10 Manufacturing > Wood Manufacturing - Generic Skills > Wood Panel Manufacturing Skills ID Title Level Credit 704 16247 Manage technical aspects of thermal energy raising operations for wood panels manufacturing Manage technical aspects of gluing operations for wood panels manufacturing 5 10 5 20 Overlay Bonding Strand Meet the requirements of all of the following sets Overlay Bonding Strand Compulsory Overlay Bonding Strand Elective Competenz SSB Code 101571 New Zealand Qualifications Authority 2016 NZQF NQ Ref 1310 Version Page 6 of 8 5 Overlay Bonding Strand Compulsory The following standard is required Manufacturing > Solid Wood Manufacturing > Overlay Bonding ID Title 722 Manage technical aspects of overlay bonding operations for wood panels manufacturing Level Credit 5 20 Level Credit 4 25 4 15 Overlay Bonding Strand Elective A minimum of 15 credits Manufacturing > Solid Wood Manufacturing > Overlay Bonding ID Title 721 1849 Bond overlays to wood panel substrates using an overlay press Press wood veneer to wood panel substrates using a veneer pressing system Laminated Veneer Lumber (LVL) and Plywood Manufacturing Strand The following standards are required Manufacturing > Solid Wood Manufacturing > Laminated Veneer Lumber and Plywood Manufacturing ID Title Level Credit 21478 21479 21480 24604 Troubleshoot laminated veneer lumber and plywood panel manufacture Explain technology and processes for laminated veneer lumber and plywood manufacture Explain veneer preparation for laminated veneer lumber and plywood manufacture Press wood veneer into plywood and laminated veneer lumber (LVL) 5 30 3 10 3 10 4 20 Manufacturing > Wood Manufacturing - Generic Skills > Wood Panel Manufacturing Skills ID Title Level Credit 701 Test wood panels and constituent materials 4 10 16247 Manage technical aspects of gluing operations for wood panels manufacturing 5 20 Transition Arrangements Version 4 Version 4 was issued following review to include the Laminated Veneer Lumber (LVL) and Plywood Manufacturing Strand and to replace standard 22979 with standard 27073 in the Core Elective section. The Laminated Veneer Lumber (LVL) and Plywood Manufacturing Competenz SSB Code 101571 New Zealand Qualifications Authority 2016 NZQF NQ Ref 1310 Version Page 7 of 8 5 Strand was removed from the National Certificate in Solid Wood Manufacturing (Advanced) with strands in Saw Doctoring, Sawmilling, Timber Drying, Timber Grading, and Timber Treatment [Ref: 1307] and added to this qualification. Changes to structure and content The Laminated Veneer Lumber (LVL) and Plywood Manufacturing Strand from qualification [Ref: 1307] was added to the qualification and the title was updated accordingly. Overall credit total for the qualification was changed from 75-95 credits to 50-115 credits. The level for the qualification was changed from Level 4 to Level 4 or 5. The Core Compulsory section was changed to a Core Elective section to provide flexibility for the individual needs of candidates. Expiring standard 22979 was replaced by standard 27073. A minor amendment to the rule for the Overlay Bonding Strand Elective was made. For detailed information see Review Summaries on the NZQA website. People working towards version 2 or 3 of this qualification may either complete the requirements for that version or transfer their results to version 4. The last date for entry to training programmes or courses for version 2 or 3 is September 2011. It is recommended that people working towards the pulp and paper strands in version 2 of this qualification transfer to the National Certificate in Wood Fibre Manufacturing (Pulp and Paper) (Level 4) with strands in Paper Making, and Mechanical Pulp Making [Ref: 1573]. People who are considering transition from version 2 or 3 to version 4 of this qualification, or to the National Certificate in Wood Fibre Manufacturing (Pulp and Paper) (Level 4) with strands in Paper Making, and Mechanical Pulp Making [Ref: 1573], or from the Laminated Veneer Lumber (LVL) and Plywood Manufacturing strand in version 2 of the National Certificate in Solid Wood Manufacturing (Advanced) with strands in Saw Doctoring, Sawmilling, Timber Drying, Timber Grading, and Timber Treatment [Ref: 1307], should contact their training provider or Competenz at the address below for further advice. This qualification contains a standard that replaces an earlier standard. For the purposes of this qualification, people who have gained credit for the expiring standard are exempt from the requirement to gain credit for the replacement standard – see table below. Credit for Exempt from 22979 27073 Previous versions of the qualification Version 3 was issued following review to include the removal of the Paper Making and Mechanical Pulp Making strands. Changes to structure and content included: the Paper Making and Mechanical Pulp Making strands were removed. The title was amended to include the descriptor Wood Panels. Standard 701 was moved to the Core Compulsory. Expiring standard 16341 was removed from the qualification. Version 2 was issued following review to include the Overlay Bonding Strand. Competenz SSB Code 101571 New Zealand Qualifications Authority 2016 NZQF NQ Ref 1310 Version Page 8 of 8 5 Version 1 was issued to following a review of Competenz qualifications. This qualification replaced the National Certificate in Pulp and Paper Manufacturing (Level 4) [Ref: 0239]; and part of the National Certificate in Wood Panels Manufacturing (Level 4) [Ref: 0254]. Certification This certificate will display the logos of NZQA, the Competenz and the organisation that has been granted consent to assess against standards that meet the requirements of the qualification (accredited). Classification This qualification is classified according to the classification system listed on the Directory of Assessment Standards (DAS) and the New Zealand Standard Classification of Education (NZSCED) system as specified below. DAS Classification NZSCED Code Description Code Description 429 Manufacturing > Wood Fibre Manufacturing 030304 Engineering and Related Technologies > Process and Resources Engineering > Wood Based Manufacturing Quality Management Systems Providers and Industry Training Organisations must be granted consent to assess by a recognised Quality Assurance Body before they can register credits from assessment against standards. Organisation with consent to assess and Industry Training Organisations assessing against standards must engage with the moderation system that applies to those standards. Consent to assess requirements and the moderation system are outlined in the associated Consent and Moderation Requirements (CMR) for each standard. Competenz SSB Code 101571 New Zealand Qualifications Authority 2016