11772 version 4
Page 1 of 4
Maintain and repair regulated marine inflatables
Level
4
Credits
8
Purpose
People credited with this unit standard are able to: assess maintenance and
repair requirements for regulated marine inflatables; carry out maintenance
and repairs; and complete the maintenance and repair task.
Subfield
Boating Industries
Domain
Marine Sales and Services
Status
Registered
Status date
27 August 1997
Date version published
20 March 2009
Planned review date
31 December 2012
Entry information
Prerequisite: Unit 11771, Maintain and repair nonregulated marine inflatables, or demonstrate equivalent
knowledge and skills.
Accreditation
Evaluation of documentation and visit by NZQA and
industry.
Standard setting body (SSB)
Boating Industry Training Organisation
Accreditation and Moderation Action Plan (AMAP) reference
0136
This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Special notes
1
Glossary of terms used in this unit standard
Company procedures – the documented procedures for the machine and/or worksite;
Maintenance – the following operations as appropriate to the specific equipment:
clean, check condition, check operation, replace consumables, adjust, waterproof,
and lubricate;
Repair – to rectify defects, and can include the replacement of parts and modification
of the equipment.
 New Zealand Qualifications Authority 2016
11772 version 4
Page 2 of 4
2
Evidence of the elements of this unit standard must be presented across the
following contexts:
a marine inflatables – certified inflatable boats, inflatable liferafts, and inflatable
lifejackets;
b regulatory requirements – International Maritime Organisation Resolution 763 (18),
1993.
3
The following apply to the performance of all elements of this unit standard:
a All required equipment must be set up, started up, operated, and shut down in
accordance with company procedures;
b All work practices must meet recognised codes of practice and documented
worksite health and safety procedures (where these exceed code) for personal,
product, and worksite health and safety, and must meet the obligations required
under the Health and Safety in Employment Act 1992 and subsequent and
delegated legislation;
c All work practices must meet recognised codes of practice and documented
worksite environmental procedures (where these exceed code) for personal,
product, and worksite environmental matters, and must meet the obligations
required under the Resource Management Act 1991 and subsequent and
delegated legislation.
4
This unit standard can be assessed on job.
Elements and performance criteria
Element 1
Assess maintenance and repair requirements for regulated marine inflatables.
Performance criteria
1.1
Inspection of the item establishes all maintenance and repair actions required to
achieve operational fitness in accordance with regulatory requirements.
1.2
Maintenance and repair requirements are matched with manufacturer’s and/or
regulatory requirements.
Range
maintenance schedules, allowable type and amount of repair.
1.3
Comparison of repair requirements with company's capability establishes
requirements for outwork.
1.4
Maintenance and repair requirements are quantified in terms of the materials
and time required.
Range
1.5
material – strength and type (hyperlon, ploy vinyl chloride,
neoprene, butyl rubber, polyurethane).
Comparison of predicted maintenance and repair cost with the value of the item
establishes the cost-effectiveness of the proposed maintenance and/or repair.
 New Zealand Qualifications Authority 2016
11772 version 4
Page 3 of 4
Element 2
Carry out maintenance and repairs.
Performance criteria
2.1
Maintenance activities are carried out in accordance with manufacturer’s
instructions, company procedures, and regulatory requirements.
2.2
Repair methods are selected and carried out in accordance with manufacturer’s
instructions and company procedures.
Range
selection of adhesive, material dimension, material shape, material
orientation.
2.3
Repairs carried out restore items to operational fitness in accordance with
regulatory requirements.
2.4
Inspections are obtained from qualified personnel in accordance with company
procedures and/or manufacturer’s requirements.
Range
2.5
independent, duplicate, progressive.
Maintenance and repairs are completed within agreed time-frames.
Element 3
Complete the maintenance and repair task.
Performance criteria
3.1
Equipment is tested to verify operational fitness in accordance with
manufacturer’s instructions, company procedures, and regulatory certification
requirements.
3.2
Equipment is prepared for use, storage, and transit in accordance with company
procedures.
Range
3.3
sealing, packing, identification of shelf-life requirement.
Documentation is completed in accordance with regulatory requirements,
manufacturer’s requirements, and company procedures.
Range
labels, work cards, release notes, log books, service certification,
regulatory certification.
Please note
Providers must be accredited by NZQA, or an inter-institutional body with delegated
authority for quality assurance, before they can report credits from assessment against
unit standards or deliver courses of study leading to that assessment.
 New Zealand Qualifications Authority 2016
11772 version 4
Page 4 of 4
Industry Training Organisations must be accredited by NZQA before they can register
credits from assessment against unit standards.
Accredited providers and Industry Training Organisations assessing against unit standards
must engage with the moderation system that applies to those standards.
Accreditation requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for organisations
wishing to develop education and training programmes, such as minimum qualifications for
tutors and assessors, and special resource requirements.
Comments on this unit standard
Please contact the Boating Industry Training Organisation training@bia.org.nz if you wish
to suggest changes to the content of this unit standard.
 New Zealand Qualifications Authority 2016