Brochure 1 : hand push landmower operations
Safety rules :
1. Read all instructions in this manual before using mower.
2. Inspect your lawn for any debris or foreign objects and remove them before
mowing
3. Never place your hands, fingers or feet inside the reel. Although not powered by a
motor, when the wheels turn, the reel cuts.
4. Don’t place your hands or feet near a moving part of the mower.
5. Don’t operate the mower while barefoot or wearing sandals.
6. Walk slowly, never run. Don’t mow excessively steep slopes. Always be sure of
your footing when operating the mower.
7. Never mow when the grass is wet enough to be slippery.
8. never intentionally strike or ram trees, fences, etc. This can cause injuries or
severely damage to the mower.
9. Make sure your mower is in safe operating conditions. Don’t attempt to operate
the mower if it is damaged, have it repaired first.
FIXED BLADE SETTING
Warning! This operation will have to be done whilst carefully turning the cylinder blade.
We strongly recommend that thick gardening gloves are worn. In order for the mower to
work efficiently the fixed blade must be set correctly. Using the two adjusting screws
carefully turn each adjusting knob in turn in a small amount in a clockwise direction until
the fixed blade just makes contact with the cylinder blade. When this is done, back off
each adjusting knob in turn until the rotating blade is just clear of the fixed blade.
CUTTING HEIGHT ADJUSTMENT
The cutting height can be adjusted by raising or lowering the cutting height roller.
Slacken the two knobs one on each side of the cutting height roller and set the height of
the roller to give the required height of cut. It is important that when adjusting the cutting
height that each end of the roller is adjusted by the same amount to keep the roller level.
If this is not done, an uneven cut will result.
CLEANING AND MAINTAIN
It is important that you keep your Cylinder Mower in a clean condition. After each use,
remove all grass cuttings that have collected in and around the wheels, roller and blades.
We suggest a routine application of oil or lubricant. This should be applied to all cutting
surfaces, the cutting reel axle shaft and wheels.
Brochure 2 : Jar Warmer cooker
How to cook rice
1. Wash the rice in a separate bowl.
2. Then place the washed rice in the inner pan
3. Add water into the inner pan. Markings inside the inner pan show required
amounts of water. Example: if you have used two measures of rice add water to
line marked 2, and so forth. You may adjust it depending upon the type of rice
and your preference.
4. Be sure to wipe dry the outside of the inner pan. Then place the inner pan into the
body and turn it slightly t the right and left until it seats properly.
5. Close the outer lid. Make sure to lock the property until it “clicks”.
6. Plug cord to AC outlet. The ‘WARM” lamp will turn on.
7. Press the switch and the cooking process has started, the “COOK” lamp will turn
on.
8. When rice is done, the switch will pop up and “WARM” lamp lights to show that
the rice warmer function is working. After the switch pops up, leave the lid closed
for at least 15 minutes before serving the rice.
How to use Jar Warmer function
1. Using the “rice warmer” function for more than 12 hours may cause discoloration
or an odor in the rice.
2. If quantity of rice for using “Jar Warmer” function is less than 6 bowlfuls, the rice
will gradually dry out and lose its flavor.
3. Utensils left in the inner pan during using “Rice Warmer” function may affect the
smell and taste of the rice.
Cautions
1. Do not use this rice cooker for any purpose other than the functions.
2. Clean the rice cooker, particularly the dew catch part and the dew collector on the
upper rim, after use.
3. Do not clog the holes in the dew catch part on the upper rim
4. Plug into properly wired wall outlet. Before you plug it in, make sure the voltage
of the unit is the same as your local supply.
5. Do not expose to water, high humidity, or heat sources. Do not use the inner pan
directly on an open flame.
6. Do not cover the lid with a cloth. The lid may deform or change color.
7. Do not tilt the rice cooker on its edge or place it upside down with its power
supply plug connected, as this may cause damaged. When tilting or placing the
rice cooker upside down, make sure to disconnect the power supply plug.
8. The lid must be closed tightly in the latched position at all times during cooking.
(the unit must not be operated with the lid opened).
Brochure 3 : The best logistics service
Wide country coverage:
Wide span of the country added with limited infrastructure bring us real distribution
challenge in itself. Over 37 branches plus other 42 agents help us to cover Indonesia
better. Operating own branch in all the capital cities in the provinces enable us to
control level of service quality across the country.
Shipment processing and tracking shipment
To ensure visibility along the distribution pipeline we implemented our SPTS. This
system not only provide you with deliveries information but also the status and
location of your shipment as the distribution progressing. Our tracking system is online in our 37 cities (and expanding). Checkpoints are established and recorded for
each shipment from arrival in the Airport, progressing through customer clearance on
forwarding to final destination.
Caraka Image Tracking
The photograph of the receiver will eliminate uncertainty of the validity of your good
shipment. So ensure as if you deliver your own shipment.
Vehicle Tracking system Using GPS
To enhance the security of the shipment along the way our line haul trucks are
equipped with GPS base Vehicle Tracking system. This tracking unit will enable us to
monitor the progress of the journey of trucks thus ensuring continuous movement of
the truck to reach the destination. Continuous movement will ensure fastest travel
time to minimizing security risk.
City courier
Hundreds of our courier operate within our hub ad spokes framework to cover
delivery and pick up service within Jakarta greater area as well as other capital city
like Bandung, Surabaya, Denpasar, Medan, Makassar, Semarang, Balikpapan,
Yogyakarta, etc.
Brocure 4 : An escape to paradise
Bukit Talita Mountain Resort rests comfortably on 6.8 hectares of beautiful hills,
overlooking to Gunung Gede and gunung Pangrango. It is where dense jungles cling
to the step hillsides. One can crisp fresh mountain breeze throughout the year.
Exclusively designed and furnished bungalows make us a one stop destination. Our
uncompromised service standards ensure great attention to details for a welcoming
friendly atmosphere.
Bukit Talita Montain Resort has become the favorite getaway from everyday routine
and hectic life, while still providing the fun and civilization. For all, it’s an escape to
paradise.