Biometric Security System Capstone Project CDR Mat Merkow Tung Nguyen Dipesh Shakya Project Description • • • • Interface for secure wireless communication Capable of connecting many sensors and devices secure data transmission and remote device operation Our implementation is a wireless security device giving access to remote devices • personally identifiable information will ever leave clients possession Goals in Order of Importance 1. Finish boards and have secure communication between them a. Serial communication b. LCD c. Keypad 2. Bluetooth communication 3. Operation Controlled Device 4. Fingerprint/Pulse Oximeter Authentication a. Software System Overview Primary Device Clients Interface? Authentication module Interface? HC11 Communication module Wireless communication LCD 16x4 CPLD Communication module Secondary Device Controlled Device (light, door, etc.) Secondary Module Internal Communications Data and Addr Bus EPROM or Memory FingerPrint Oximeter Bluetooth Serial Interfaces Parallel Interface LCD 16x4 Power Switch Data Bus 6 higher order addr CPLD Chip Select To EPROM / Memory To PC 16552 To LCD 2xPC16552 4 Address Bit HC11 Bus Drivers Micro controller Latch FLASH EPROM RAM (8Kx8 bits) CPLD • Chip Select • Interrupt handler • Some behavior logic Finger Chip Module AT77SM0101BCB02VKE • Standalone device with build-in CPU Hardware Schematic Pulse Oximeter • 34 mm by 24mm • Low power 29mW • RS-232 communication • Demonstration Software • All Cables • One free sensor • Cost: $300.00 + shipping Pulse Oximeter Data Format BlueTooth Communication User Interface Communication Module BlueTooth Tx/Rx TDK BISM • TDK Bluetooth Intelligence Serial Module Wireless Medium BlueTooth Tx/Rx Secondary Module Controlled Devices • Stand alone module with integral antenna. • Frequency: 2.4 - 2.485 GHz. • Range: upto 100 meters. • Physical size: 84 x 69 x 5 mm. • Data transfer rate: upto 200 kbps. • Cost $106 LCD INTERFACE Features: • 16 Characters x 4 Lines. • 5 x 7 Dot Matrix Character + Cursor. • Built in LCD Controller/driver, equivalent to HD44780. • LED Backlight version. • Size : 87 x 60 x 13.5 mm. • Display Area: 61.8 x 25.2 mm. • Power Supply Voltage: 2.7V – 6.5 V. • Power Supply Current: 0.5 – 1 mA • LED Supply Voltage: 4.6 – 5 V • LED Supply Current: 200 – 400 mA • Cost: $30.04 + shipping. ACM1604C Progress • Wire-Wrap board has been completed and tested through EPROM, NOP loop runs our system. • Schematics have been created for HC11, Memory, and CPLD. • Vender for Pulse Oximeter has been researched and selected. Time Chart Contingency Plans • Unable to get Fingerprint module working – Use keypad for authentication • Unable to get Bluetooth working – Use wires to connect the devices • Unable to get PCB boards working – Build a second wire-wrap board Questions ? BioSec Team Mat Merkow Tung Nguyen Dipesh Shakya Thank You ! BioSec Team Mat Merkow Tung Nguyen Dipesh Shakya