REFERENCES
Abe, M., Kawashima, K., Kozawa, K., Sakai, H., and Kaneko, K. (2000). Amination
of AC and Adsorption Characteristics of Its Aminated Surface. Langmuir. 16:
5059–5063.
Abu El Ela, M., Mahgoub, I. S., Nabawi, M. H., and Ahmed, M. A. A. (2008a).
Mercury Monitoring and Removal at Gas-Processing Facilities: Case Study of
Salam Gas Plant. Society of Petroleum Engineers. DOI:10.2118/106900-PA.
Abu El Ela, M., Nabawi, M. H., and Ahmed, M. A. A. (2008). Behavior of the
Mercury Removal Absorbents at Egyptian Gas Plant. Society of Petroleum
Engineers, DOI: http://dx.doi.org/10.2118/114521-MS.
ACAP. (2004). Artic Council Action Plan to Eliminate Pollution of the Arctic.
Assessment of Mercury Releases from the Russian Federation: Reduction of
Atmospheric Mercury Releases from Arctic States. Russian Federal Service for
Environmental, Technological and Atomic Supervision Danish Environmental
Protection Agency, COWI A/S.
Afrane, G. and Achaw, O.W. (2008). Short communication: Effect of the
Concentration Of Inherent Mineral Elements On The Adsorption Capacity Of
Coconut Shell-Based Activated Carbon. Bioresource Technology. 99: 66786682.
Ahmad, M., Lee, S. S., Dou, X., Mohan, D., Sung, J. K., Yang, J. E., and Ok, Y. S.
(2012). Effects of Pyrolysis Temperature on Soybean Stover- And Peanut
Shell-Derived Biochar Properties and TCE Adsorption in Water. Bioresource
Technology. 118: 536-544.
Ahmad, T., Rafatullah, M., Ghazali, A., Sulaiman, O., and Hashim, R. (2011). Oil
Palm Biomass-Based Adsorbents for the Removal of Water Pollutants: A
Review. Journal Environmental Science Health C Environmental
Carcinogenesis & Ecotoxicology Reviews. 29(3): 177-222.
162
Amuda, O. S., Giwa, A. A., and Bello, I. A. (2007). Removal of Heavy Metal From
Industrial Wastewater Using Modified Activated Coconut Shell Carbon.
Biochemical Engineering Journal. 36: 174-181.
Anirudhan, T. S., Divya, L., and Ramachandran, M. (2008). Mercury (II) Removal
From Aqueous Solutions And Wastewaters Using A Novel Cation Exchanger
Derived From Coconut Coir Pith And Its Recovery. Journal of Hazardous
Material. 157: 620-627.
Anirudhan, T. S., Divya, L., and Suchithra, P. S. (2009). Kinetic and Equilibrium
Characterization Of Uranium (VI) Adsorption Onto CarboxylateFunctionalized Poly(Hydroxyethylmethacrylate)-Grafted Lignocellulosics.
Journal of Environmental Management. 90: 549-560.
Anirudhan, T. S., Rijith, S., and Suchithra, P. (2010), Preparation and
Characterization Of Iron (III) Complex Of An Amino-Functionalized
Polyacrylamide-Grafted Lignocellulosics And Its Application As Adsorbent
For Chromium (VI) Removal From Aqueous Media. Journal of Applied
Polymer Science. 115(4): 2069–2083.
Asasian, N. and Kaghazchi, T. (2013). Optimization of Activated Carbon
Sulfurization to Reach Adsorbent with the Highest Capacity for Mercury
Adsorption, Separation Science and Technology. 48: 2059-2072.
Asasutjarit, C., Hirunlabh, J., Khedari, J., Charoenvai, S., Zeghmati, B., and Cheul
Shin, U. (2007). Development of Coconut Coir-Based Lightweight Cement
Board. Construction and Building Materials. 21: 177-288.
Assari, M. J., Rezae, A., Jafari, A. J., and Bahrami, A. (2013). Optimization of a
Novel Setup For An On-Line Study Of Elemental Mercury Adsorption By
Cold-Vapor Atomic Absorption Spectrometry, Journal of Research in Health
Sciences, 13(1): 37-42.
ASTM International (2007). ASTM E1762-84. Standard test method for chemical
analysis of wood charcoal. West Conshohocken, PA.
ASTM International (2008). ASTM E1755-01. Standard test method for
determination of total solids in biomass. West Conshohocken, PA.
ASTM International (2008). ASTM E1756-08. Standard test method for ash in
biomass1. West Conshohocken, PA.
163
Baek, J. I., Yoon, J. H., Lee, S. H., and Ryu, C. K. (2007). Removal of Vapor-Phase
Elemental Mercury by Oil-Fired Fly Ashes. Industrial & Engineering
Chemistry Research. 46: 1390-1395.
Bailey, S. E., Olin, T. J., Bricka, R. M., and Adrian, D. D. (1999). A Review of
Potentially Low-Cost Sorbents for Heavy Metals, Water Research. 33(11):
2469-2479.
Baltrus, J. P., Granite, E. J., Pennline, H. W., Stanko, D., Hamilton, H., Rowsell, L.,
Poulston, S., Smith, A., and Chu, W. (2010). Surface Characterization Of
Palladium-Alumina Sorbents For High Temperature Capture Of Mercury And
Arsenic From Fuel Gas. Fuel. 89: 1323-1325.
Basha, S., Murthy, Z.V.P., and Jha, B. (2008). Sorption of Hg(II) from Aqueous
Solutions Onto Carica Papaya: Application Of Isotherms. Industrial &
Engineering Chemistry Research. 47: 980-986.
Bergan, T. and Rodhe, H. (2001). Oxidation of Elemental Mercury in the
Atmosphere; Constraints Imposed By Global Scale Modeling. Journal of
Atmospheric Chemistry. 40(2): 191-212.
Bhatnagar, A., Vilar, V. J. P., Botelho, C. M. S., and Boaventura, R. A. R. (2010).
Coconut-Based Biosorbents for Water Treatment–A Review of the Recent
Literature, Advances in Colloid and Interface Science. 160 (1-2): 1-15.
Bilba, K., Arsene M. A., and Ouensanga, A. (2007). Study of Banana and Coconut
Fibers Botanical Composition, Thermal Degradation and Textural
Observations. Bioresource Technology. 98: 58-68.
Bismarck, A., Mohanty, A. K., Aranberri-Askargorta, I., Czapla, S., Hinrichsen, G.,
and Springer, J. (2001). Surface Characterization of Natural Fibers, Surface
Properties and the Water Up-Take Behavior of Modified Sisal and Coir Fibers.
Green Chemistry. 3: 100-107.
Boutsika, L. G., Karapanagioti, H. K., and Manariotis I. D. (2013). Aqueous Mercury
Sorption by Biochar from Malt Spent Rootlets. Water, Air, & Soil Pollution.
225: 1805-1815.
Brigida, A. I. S., Calado, V. M. A., Gonçalves, L. R. B., and Coelho, M. A. Z.
(2010). Effect of Chemical Treatments on Properties of Green Coconut Fiber.
Carbohydrate Polymers. 79(4): 832-838.
164
Brodeur, G., Yau, E., Badal, K., Collier, J., Ramachandran, K. B., and
Ramakrishnan, S. (2011). Chemical and Physicochemical Pretreatment of
Lignocellulosic Biomass: A Review. Enzyme Research. 2011: 1-17.
Buitrago, P. A., Morrill, M., Lighty, J. S., and Silcox, G. D. (2009). Modelling and
Experimental Studies of Mercury Oxidation and Adsorption in a Fixed-Bed
Reactor: Topical Report. University of Utah, East Salt Lake City, Utah.
Cagnon, B., Py, X., Guillot, A., Stoeckli, F., and Chambat, G. (2009). Contributions
of Hemicellulose, Cellulose and Lignin to the Mass and the Porous Properties
of Chars and Steam Activated Carbons from Various Lignocellulosic
Precursors. Bioresource Technology. 100, 292-298.
Cagnon, B., Py, X., Guillot, A., Stoeckli, F., and Chambat, G. (2003). The Effect of
the Carbonization/Activation Procedure on the Microporous Tecture of the
Subsequent Chars and Active Carbons. Microporous Mesoporous Materials.
57: 273-282.
Cai, J., Shen, B., Li, Z., Chen, J., and He, C. (2014). Removal of Elemental Mercury
By Clays Impregnated With KI and KBr. Chemical Engineering Journal. 241:
19-27.
Çalışkana, E., Bermúdezc, J. M., Parrac, J. B., Menéndezc, J. A., Mahramanlıoğlud,
M., and Ania, C. O. (2012). Low Temperature Regeneration of Activated
Carbons Using Microwaves: Revising Conventional Wisdom. Journal of
Environmental Management. 102: 2012, 134–140.
Cantrell, K. B., Hunt, P. G., Uchimiya, M., Novak, J. M., and Ro, K. S. (2012).
Impact of Pyrolysis Temperature and Manure Source on Physicochemical
Characteristics of Biochar. Bioresource Technology. 107: 419-428.
Cathum, S., Velicogna, D., Obenauf, A., Dumouchel, A., Punt, M., Brown, C.E., and
Ridal, J. (2005). Detoxification of Mercury in the Environment. Analytical and
Bioanalytical Chemistry. 38: 1491-1498.
Cazetta, A. L., Vargas A. M. M., Nogami, E. M., Kunita, M. H., Guilherme, M. R.,
Martins, A. C., and Silva, T. L. (2011). NaOH-Activated Carbon Of High
Surface Area Produced From Coconut Shell: Kinetics And Equilibrium Studies
From The Methylene Blue Adsorption. Chemical Engineering Journal. 174:
117-125.
Chang, R. and Offen, G. (1995). Mercury Emission Control Technologies: An EPRI
Synopsis. Power Engineering. 99(11): 51–57.
165
Chauhan, D. and Sankararamakrishnan, N. (2011). Modeling and Evaluation on
Removal of Hexavalent Chromium from Aqueous Systems Using Fixed Bed
Column. Journal of Hazardous Materials. 185(1): 55-62.
Chen, L., Li, C. T., Gao, Z., Fan, X. P., Peng, D. L., and Cui, H.F. (2010).
Experimental Study of Removing Elemental Mercury from Flue Gas by
MnOx/HZSM-5, China Enviromental Science. 30(8): 1026-1031.
Chen, W. C., Lin, H. Y., Yuan, C. S., and Hung, C. H. (2009). Kinetic Modeling on
the Adsorption of Vapor-Phase Mercury Chloride on Activated Carbon by
Thermogravimetric Analysis. Journal of the Air & Waste Management
Association. 59(2): 227-235.
Chen, Y. Q., Yang, H. P., Wang, X. H., Zhang, S. H., and Chen, H. P. (2012).
Biomass-Based Pyrolytic Polygeneration System on Cotton Stalk Pyrolysis:
Influence of Temperature. Bioresource Technology. 107: 411-418.
Chen, Y., Zhou, L. J., Hong, Y. Z., Cao, F., Li, L., and Li, J. B. (2010). Preparation
of High-Surface-Area Activated Carbon from Coconut Shell Fibers. Carbon.
25(2), 151-155.
Chen, Y., Zhu, Y., Wang, Z., Li, Y., Wang, L., Ding, L., Gao, X., Ma, Y., and Guo,
Y. (2011). Application Studies Of Activated Carbon Derived From Rice Husks
Produced By Chemical-Thermal Process-A Review. Advances in Colloid and
Interface Science. 163: 39-52.
Chowdhury, S., Mishra, R., Saha, P., and Kushwaha, P. (2011). Adsorption
Thermodynamics, Kinetics and Isoteric Heat of Adsorption of Malachite Green
onto Chemically Modified Rice Husk. Desalination. 265: 159-168.
Chowdhury, Z. Z., Abd Hamis, S. B., Das, R., Hasan, M. R., Mohd Zain, S., Khalid,
K., and Uddin, M. N. (2013). Preparation of Carbonaceous Adsorbents from
Lignocellulosic Biomass and Their Usein Removal of Contaminants from
Aqueous Solution. BioResources. 8(4): 6523-6555.
Chung, S. T., Kima, K. I., and Yunb, Y. R. (2009). Adsorption of Elemental Mercury
Vapor by Impregnated Activated Carbon from a Commercial Respirator
Cartridge. Powder Technolology. 192(1): 47-53.
Coade, R. and Coldham, D. (2006). The Interaction of Mercury and Aluminium in
Heat Exchangers in Natural Gas Plants. International Journal of Pressure
Vessels and Piping. 83: 336–342.
166
Coolidge, A. S. (1927). The Adsorption of Mercury Vapor by Charcoal. Contribution
from the Chemical Laboratory of Harvard University. 49: 1949-1952.
Couling, D. J., Nguyen, H. V., and Green, W. H. (2012). Screening of Metal Oxides
and Metal Sulfides as Sorbents for Elemental Mercury at Elevated
Temperature. Fuel. 97: 783-795.
Couper, J. R., Penney, W.R., and Fair, J. R. Chemical Process Equipment. Selection
and Design. Third Edition. Butterworth Heinemann: IChemE. 2012.
Crini, G. and Badot, P. M. (2008). Application of Chitosan, A Natural
Aminopolysaccharide, For Dye Removal From Aqueous Solutions By
Adsorption Processes Using Batch Studies: A Review Of Recent Literature.
Progress Polymer Science. 33: 399-447.
Crittenden, B. and Thomas, W. J. Adsorption Technology and Design. London,
England. Elsevier Science & Technology Books. 1998.
da Costa Castro, C. D. P. Faria, J. A.F., and Dantas T. B.H. (2012). Testing the Use
of Coconut Fiber as a Cushioning Material for Transport Packaging. Materials
Sciences and Applications. 3(3): 151-156.
Dan, T.K. (1993). Development of Lightweight Building Bricks Using Coconut Pith,
Indian Coconut Journal. 23(11): 12-19.
Das, S. K., Das, A. R., and Guha, A. K. A. (2007). Study on the Adsorption
Mechanism of Mercury on Aspergillus Versicolor Biomass. Environmental
Science & Technology. 4: 8281−8287.
De Rosa, I. M., Kenny, J. M., Maniruzzaman, M., Moniruzzaman, M., Monti, M.,
Puglia, D., Santulli, C., and Sarasini, F. (2011). Effect of Chemical Treatments
on the Mechanical and Thermal Behaviour of Okra (Abelmoschus Esculentus)
fibres. Composites Science and Technology. 71: 246-254.
de Sousa, D. A., de Oliveira, E., da Costa Nogueira, M., and Espósito, B. P. (2010).
Development of a Heavy Metal Sorption System Through the P=S
Functionalization Of Coconut (Cocos Nucifera) Fibers. Bioresource
Technology. 101: 138–143.
De, M., Azargohar, R., Dalai, A. K., and Shewchuk, S. R. (2013). Mercury Removal
By Biochar Based Modified Activated Carbons. Fuel. 103: 570-578.
Demirbas, A. (2004). Effects of Temperature and Particle Size on Bio-Char Yield
from Pyrolysis of Agricultural Residues. Journal of Analytical and Applied
Pyrolysis. 72(2): 243-248.
167
Demirbas, A. (2008). Heavy Metal Adsorption onto Agro-Based Waste Materials: A
Review. Journal of Hazardous Materials. 157(2-3): 220-229.
Deng, S. Sorbent Technology. In: Lee, S. (Ed.), Encyclopedia of Chemical
Processing, New York: Taylor & Francis Group. 2825-2845; 2006.
Di Balsi, C. (2009). Combustion and Gasification Rates of Lignocellulosic Chars.
Progress in Energy and Combustion Science. 35: 121-140.
Dias, J. M., Alvim-Ferraz, M. C. M., Almeida, M. F., Rivera-Utrilla, J., and SanchezPolo, M. (2007). Waste Materials For Activated Carbon Preparation And Its
Use In Aqueous-Phase Treatment: A review. Journal of Environmental
Management. 88: 833-846.
Diaz-Somoano, M., Unterberger, S., and Hein, K. R. G. (2007). Mercury Emission
Control in Coal-Fired Plants: The Role of Wet Scrubbers. Fuel Processing
Technology. 88: 259-263.
Ding, F., Zhao, Y., Mi, L., Li, H., Li, Y., and Zhang, J. (2012). Removal of GasPhase Elemental Mercury In Flue Gas By Inorganic Chemically Promoted
Natural Mineral Sorbents. Industrial & Engineering Chemistry Research. 51:
3039-3047.
Dombrowski, K. D., Machalek, T., Richardson, C. F., Chang, R., and Rostam-Abadi,
M. Recent Developments in EPRI’s novel mercury sorbent development
program. combined Power Plant Air Pollutant Control Mega Symposium,
Washington, DC, 19–22 May 2003.
Dong, J., Xu, Z., and Kuznicki, S. M. (2009). Mercury Removal From Flue Gases By
Novel Regenerable Magnetic Nanocomposite Sorbents. Environmental Science
& Technology. 43: 3266-3271.
Eckersley, N. (2010). Advanced Mercury Removal Technologies. Hydrocarbons
Technology. 29–35.
Eswaran, S. and Stenger, H. G. (2007). Gas-Phase Mercury Adsorption Rate Studies,
Energy Fuels. 21: 852-857.
European Commission, (2010). Requirements for Facilities and Acceptance Criteria
for the Disposal of Metallic Mercury. Citing internet sources URL:
http://ec.europa.eu/environment/chemicals/mercury/pdf/
bipro_study20100416.pdf.
168
Ewecharoen, A., Thiravetyan, P., and Nakbanpote, W. (2008). Comparison of Nickel
Adsorption From Electroplating Rinse Water By Coir Pith And Modified Coir
Pith. Chemical Engineering Journal. 137: 181-188.
Fan, X., Dickey, E. C., Pennycook, S. J., and Sunkara, M. K. (1999). Z-Contrast
Imaging And Electron Energy-Loss Spectroscopy Analysis Of ChromiumDoped Diamond-Like Carbon Films. Applied Physics Letters. 75: 2740-2742.
Fan, X., Li, C., Zeng, G., Zhang, X., Tao, S., Lu, P., Tan, Y., and Luo, D. (2012).
Hgo Removal from Simulated Flue Gas Over CeO2/HZSM-5. Energy Fuels.
26: 2082-2089.
Fang, S. C. (1978). Sorption and Transformation of Mercury Vapor By Dry Soil,
Environmental Science & Technology. 12(3): 285-288.
Febrianto, J., Kokasih, A. N., Sunarso, J., Ju, Y. H., Indraswati, N., and Ismadji, S.
(2009). Equilibrium and Kinetic Studies in Adsorption of Heavy Metals Using
Biosorbent: A Summary of Recent Studies. Journal of Hazardous Materials.
162: 616-645.
Feng, W., Borguet, E., and Vidic, R. D. (2006). Sulfurization of Carbon Surface for
Vapor Phase Mercury Removal – I: Effect of Temperature and Sulfurization
Protocol. Carbon. 44: 2990-2997.
Feng, W., Borguet, E., and Vidic, R.D. (2006a), Sulfurization of Carbon Surface for
Vapor Phase Mercury Removal – II: Sulfur Forms and Mercury Uptake.
Carbon. 44(14): 2998-3004.
Foo, K. Y. and Hameed, B. H. (2009). Recent Developments in the Preparation and
Regeneration of Activated Carbons by Microwaves. Advances in Colloid and
Interface Science. 149: 19–27.
Foo, K. Y. and Hameed, B. H. (2012). Coconut Husk Derived Activated Carbon via
Microwave Induced Activation: Effects of Activation Agents, Preparation
Parameters and Adsorption Performance. Chemical Engineering Journal.
184(1): 57-65.
Foo, K. Y. and Hammed, B. H. (2010). Insights into the Modeling of Adsorption
Isotherm Systems, Chemical Engineering Journal. 156: 2–10.
Fuente-Cuesta, A., Diaz-Somoano, M., Lopez-Anton, M. A., Cieplik, M., Fierro, J.
L. G., and Martinez-Tarazona, M. R. (2012). Biomass Gasification Chars For
Mercury Capture From A Simulated Flue Gas Of Coal Combustion. Journal of
Environmental Management. 98: 23-28.
169
Funke, A. and Ziegler, F. (2010). Hydrothermal Carbonization of Biomass: A
Summary and Discussion of Chemical Mechanisms for Process Engineering.
Biofuels, Bioproducts and Biorefining. 4(2): 160–177.
Gao, Y., Zhang, Z., Wu, J., Duan, L., Umar, A., Sun, L., Guo, Z., and Wang, Q.
(2013). A critical review on the heterogenous catalytic oxidation of elemental
mercury in flue gases. Environmental Science & Technology. 47: 10813-10823.
Gaspard, S., Passé-Coutrin, N., Durimel, A., Cesaire T., and Jeanne-Rose V. Chapter
2: Activated carbon from biomass for water treatment. In Biomass for
Sustainable Application: Pollution Remediation and Energy. Royal Society of
Chemistry. 46-105; 2014.
Geethammaa, V. G., Mathew, K. T., Lakshminarayanan, R., and Thomas, S. (1998).
Composite of Short Fibres and Natural Rubber: Effect of Chemical
Modification, Loading and Orientation of Fibre. Polymer. 39(6-7): 1483-1491.
Goel, J., Kadirvelu, K., Rajagopal, C., and Garg, V. K. (2005). Investigation of
Adsorption of Lead, Mercury and Nickel from Aqueous Solutions onto
Carbon Aerogel. Journal of Chemical Technology and Biotechnology. 80:
469–476.
Goel, J., Kadirvelu, K., Rajagopal, C., and Garg, V.K. (2005a). Removal of Lead
(II) by Adsorption Using Treated Granular Activated Carbon: Batch And
Column Studies. Journal of Hazardous Materials. B125: 211-220.
Gonzalez, M. H., Araujo, G. C. L., Pelizaro, C. B., Menezes, E. A., Lemos, S. G., de
Sousa, G. B., and Nogueira, A. R. A. (2008). Coconut Coir As Biosorbent For
Cr(VI) Removal From Laboratory Wastewater. Journal of Hazardous
Materials. 159(2-3): 252-256.
Goodarzi, F. and Hower, J. C. (2008). Classification of Carbon in Canadian Fly
Ashes and Their Implications in the Capture of Mercury. Fuel. 87(10-11):
1949-1957.
Goshadraou, A. and Moheb, A. (2011). Continuous fixed bed adsorption of C.I. Acid
Blue 92 by exfoliated graphite: An experimental and modeling study.
Desalination. 269: 170-176.
Granite, E. J., Freeman, M. C., Hargis, R. A., O’Dowd, W. J., and Pennline, H. W.
(2007). The Thief Process for Mercury Removal from Flue Gas. Journal of
Environmental Management. 84: 628-634.
170
Granite, E. J., Pennline, H. W., and Hargis, R. A. (2000). Novel Sorbents For
Mercury Removal From Flue Gas. Industrial & Engineering Chemistry
Research. 39: 1020-1029.
Gritti, F., Piatkowski, W., and Guiochon, G. (2002). Comparison of the Adsorption
Equilibrium of A Few Low-Molecular Mass Compounds on a Monolithic and a
Packed Column in Reversed-Phase Liquid Chromatography. Journal
Chromatography A. 978: 81-107.
Gu, H. (2009). Tensile Behaviours of the Coir Fiber and Related Composites after
NaOH Treatment. Materials & Design. 30(9): 3931-3934.
Guo, J. and Lua, A. C. (1998). Characterization of Chars Pyrolyzed From Oil Palm
Stones For The Preparation Of Activated Carbons. Journal of Analytical and
Applied Pyrolysis. 46: 113-125.
Gupta, V. K., Jain, R., Shrivastava, M., and Nayak, A. (2010). Equilibrium and
Thermodynamic Studies on the Adsorption of the Dye Tartrazine onto Waste
“Coconut Husks” Carbon and Activated Carbon. Journal of Chemical &
Engineering Data. 55 (11): 5083–5090.
Hamdaoui, O. (2006). Dynamic Sorption of Methylene Blue by Cedar Sawdust and
Crushed Brick in Fixed Bed Columns. Journal of Hazardous Materials.
138(2): 293-303.
Hameed, B. H. and Foo, K. Y. (2012). Coconut Husk Derived Activated Carbon via
Microwave Induced Activation: Effects of Activation Agents, Preparation
Parameters and Adsorption Performance. Chemical Engineering Journal. 184:
57-65.
Hameed, B. H. and El-Khaiary, M. I. (2008). Sorption kinetics and isotherm studies
of cationic dye using agricultural waste: broad bean peels. Journal of
Hazardous Material. 154: 639–648.
Hameed, B. H., Tan, I. A. W., and Ahmad, A. L. (2008). Adsorption Isotherm,
Kinetic Modeling And Mechanism Of 2,4,6-Trichlorophenol On Coconut
Husk-Based Activated Carbon. Chemical Engineering Journal. 144, 235-244.
Han, L., Lv, X., Wang, J., and Chang, L. (2012). Palladium-Iron Bimetal Sorbents
for Simultaneous Capture of Hydrogen Sulfide and Mercury from Simulated
Syngas. Energy Fuels. 26: 1638-1644.
171
Hasany, S. M. and Ahmad, R. (2006). The Potential of Cost-Effective Coconut Husk
for the Removal of Toxic Metal Ions for Environmental Protection. Journal of
Environmental Management. 81: 286-295.
Hassett, D. J. and Eylands, K. E. (1999). Mercury Capture on Coal Combustion Fly
Ash. Fuel. 78: 243-248.
Hayashi, T., Lee, T. G., Hazelwood, M., Hedrick, E., and Biswas, P. (2000).
Characterization of Activated Carbon Fiber Filters for Pressure Drop,
Submicrometer Particulate Collection, and Mercury Capture. Journal of the Air
& Waste Management Association. 5: 922–929.
He, J., Reddy, G. K., Thiel, S. W., Smirniotis, P. G., and Pinto, N. G. (2013).
Simultaneous Removal Of Elemental Mercury And NO From Flue Gas Using
CeO2 modified MnOx/TiO2 materials. Energy Fuels. 27: 4832-4839.
Ho, Y. S. and McKay, G. (1998). Sorption of Dye from Aqueous Solution by Peat.
Chemical Engineering Journal. 70: 115-124.
Ho, Y. S. and McKay, G. (1999). Pseudo-Second Order Model for Sorption
Processes. Process Biochemistry. 34: 451–465.
Ho, Y. S. and Ofomaja, A. E. (2006). Biosorption Thermodynamics of Cadmium On
Coconut Copra Meal As Biosorbent. BioChemical Engineering Journal. 30:
117-123.
Hsi, H. C., Rood, M. J., Rostam-Abadi, M., Chen, S. G., and Chang, R. (2001).
Effects of Sulfur Impregnation Temperature on the Properties and Mercury
Adsorption Capacities of Activated Carbon Fibers (ACFs). Environmental
Science & Technology. 35(13): 2785-2791.
Hsi, H. C., Rood, M. J., Rostam-Abadi, M., Chen, S., and Chang, R. (2002). Mercury
Adsorption Properties of Sulfur-Impregnated Adsorbents. Journal of
Environmental Engineering. 128: 1080-1089.
Hsi, H. C., Tsai, C. Y., Kuo, T. H., and Chiang, C. S. (2011). Development of LowConcentration Mercury Adsorbents from Biohydrogen-Generation Agricultural
Residues Using Sulfur Impregnation. Bioresource Technology. 102: 74707477.
Hsi, H. C. and Chen, S. (2012). Influences of Acidic/Oxidizing Gases On Elemental
Mercury Adsorption Equilibrium And Kinetics Of Sulfur-Impregnated
Activated Carbon. Fuel. 98: 229–235.
172
Hsi, H. C., Chen, S., Rostam-Abadi, M., Rood, M. J., Richardson, C. F., Carey, T.
R., and Chang, R. (1998). Preparation and Evaluation Of Coal-Derived
Activated Carbon For Removal Of Mercury Vapor From Simulated Coal
Combustion Flue Gases. Energy Fuels. 12: 1061-1070.
Hu, C., Zhou, J., He, S., Luo, Z., and Cen, K. (2009). Effect of Chemical Activation
Of An Activated Carbon Using Zinc Chloride On Elemental Mercury
Adsorption. Fuel Processing Technology. 90: 812-817.
Hua, X. Y., Zhou, J. S., Li, Q., Luo, Z. Y., and Cen, K. F. (2010). Gas-Phase
Elemental Mercury Removal by CeO2 Impregnated Activated Coke. Energy
Fuels. 24: 5426-5431.
Huang, J. L. and Pramoda, N. Chapter 7: Processing and characterization of
alumina/chromium carbide ceramic nanocomposite. In: Dr. Abbass Hashim
(Ed.), ISBN: 978-953-307-347-7. Advances in Nanocomposite Technology.
InTech. DOI: 10.5772/17899; 2011.
Hubbe, M. A., Hasan, S. H., and Ducoste, J. J. (2011). Cellulosic Substrates For
Removal Of Pollutants From Aqueous Systems: A Review. 1. Metals.
BioResources. 6(2): 2161-2914.
Hutchison, A. R. and Atwood, DA. (2003). Mercury Pollution and Remediation: The
Chemist’s Response to a Global Crisis. Journal of Chemical Crystallography.
33: 1074–1542.
Ie, I. R., Hung, C. H., Jen, Y. S., Jen, Y. S., Yuan, C. S., and Chen, W. H. (2013).
Adsorption of Vapor-Phase Elemental Mercury (Hgo) and Mercury Chloride
(HgCl2) With Innovative Composite Activated Carbons Impregnated With
Na2S and So in Different Sequences. Chemical Engineering Journal. 229: 469476.
Igwe, J. C., Abia, A. A., and Ibeh, C. A. (2008). Adsorption Kinetics and
Intraparticulate Diffusivities of Hg, As and Pb ions On Unmodified And
Thiolated Coconut Fiber. International Journal of Environmental Science and
Technology. 5(1): 83-92.
Israel, A. U., Ogali, R. E., Akaranta, O., and Obot, I. B. (2011). Extraction and
Characterization of Coconut (Cocos Nucifera L.) Coir Dust. Songklanakarin
Journal of Science and Technology. 33(6): 717-724.
173
Issaro, N., Abi-Ghanem, C., and Bermond, A. (2009). Fractionation Studies of
Mercury in Soil and Sediments: A Review of the Chemical Reagents Used For
Mercury Extraction. Analytica Chimica Acta. 631: 1-12.
Jack, W. (2010). An NGO Introduction to Mercury Pollution, International POPs
Elimination Network. Citing internet sources
URL:http://www.ipen.org/ipenweb/documents/ipen_education.html.
Ji, L., Abu-Daabes, M., and Pinto, N. (2009). Thermally Robust Chelating
Adsorbents for the Capture of Gaseous Mercury: Fixed-Bed Behavior.
Chemical Engineering Science. 64: 486-491.
Ji, L., Sreekanth, M., Smirniotis, P. G., Thiel, S., and Pinto, N. G. (2008).
Manganese Oxide/Titania Materials for Removal of NOx and Elemental
Mercury from Flue Gas. Energy Fuels. 22: 2299-2306.
Jia, Y. F. and Thomas, K. M. (2000). Adsorption of Cadmium Ions on Oxygen
Surface Sites in Activated Carbon. Langmuir. 16(3): 1114–1122.
Johari, K., Saman, N., and Mat, H. (2014). Adsorption Enhancement of Elemental
Mercury onto Sulphur-Functionalized Silica Gel Adsorbents. Environmental
Technology. 35(5): 629-636.
Johari, K., Saman, N., Song, S. T., and Mat, H. (2015). Removal Performance Of
Elemental Mercury By Low-Cost Adsorbents Prepared through Facile Methods
of Carbonization and Activation of Coconut Husk. Waste Management &
Research. 33(1): 81-88.
Johari, K., Saman, N., Song, S. T., Heng, J. Y. Y., and Mat, H. (2014a). Study of
Hg(II) Removal From Aqueous Solution Using Lignocellulosic Coconut Fiber
Biosorbents: Equilibrium and Kinetic Evaluation. Chemical Engineering
Communications. 201: 1198-1220.
Johari, K., Saman, N., Song, S. T., Mat, H., and Stuckey, D. C. (2013). Utilization
of Coconut Milk Processing Waste As A Low-Cost Mercury Sorbent.
Industrial & Engineering Chemistry Research. 52(44): 15648–15657.
Kadirvelu, K. and Namasivayam, C. (2003). Activated Carbon Form Coconut
Coirpith As Metal Adsorbent: Adsorption of Cd(II) from Aquoeus Solution.
Advances in Environmental Research. 7: 471-478.
Kadirvelu, K., Goel, J., and Rajagopal, C. (2007). Sorption of Lead, Mercury and
Cadmium Ions in Multicomponent System Using Carbon Aerogel as
Adsorbent. Journal of Hazardous Materials. 153(1-2): 502-507.
174
Karatza, D., Lancia, A., and Musmarra, D. (1998). Fly Ash Capture Of Mercuric
Chloride Vapors From Exhaust Combustion Gas. Environmental Science &
Technology. 32: 3999-4004.
Karatza, D., Lancia, A., Musmarra, D., and Zucchini, C. (2000). Study of Mercury
Absorption and Desorption On Sulfur Impregnated Carbon. Experimental
Thermal and Fluid Science. 21: 150-155.
Karatza, D., Lancia, A., Prisciandaro, M., Musmarra, D., and Mazziotti di Celso, G.
(2013). Influence of Oxygen on Adsorption of Elemental Mercury Vapors onto
Activated Carbon. Fuel. 111: 485-491.
Karatza, D., Prisciandaro, M., Lancia, A., and Musmarra, D. (2011). Silver
Impregnated Carbon for Adsorption and Desorption Of Elemental Mercury
Vapors. Journal of Environmental Sciences. 23(9): 1578-1584.
Katesa, J., Junpiromand, S., and Tangsathitkulchai, C. (2010). Effect of
Carbonization Temperature on Properties of Char and Activated Carbon from
Coconut Shell. Suranaree Journal of Science and Technology. 20(4): 269-278.
Kavitha, D. and Namasivayam, C. (2007). Experimental and Kinetic Studies on
Methylene Blue Adsorption by Coir Pith Carbon. Bioresource Technology. 98:
14-21.
Kavitha, D. and Namasivayam, C. (2007b). Recycling Coir Pith, an Agricultural
Solid Waste, For the Removal of Procion Orange from Wastewater. Dyes and
Pigments. 74: 237-248.
Kim, K. H., Kim, J. Y., Cho, T. S., and Choi, J. W. (2012). Influence of Pyrolysis
Temperature On Physicochemical Properties Of Biochar Obtained From The
Fast Pyrolysis of Pitch Pine (Pinus Rigida). Bioresource Technology. 118: 158162.
Kiselev, A. V. (1968). Adsorption Properties of Hydrophobic Surfaces. Journal of
Colloid Interface Science. 28(3–4): 430–442.
Klasson, K. T., Lima, I. M., Boihem Jr., L. L., and Wartelle, L. H. (2010). Feasibility
of Mercury Removal From Simulated Flue Gas By Activated Chars Made
From Poultry Manures. Journal of Environmental Management. 91: 24662470.
Kong, F., Qiu, J., Liu, H., Zhao, R., and Ai, Z. (2011a). Catalytic Oxidation of GasPhase Elemental Mercury By Nano-Fe2O3. Journal of Environmental Sciences.
23(4): 699-704.
175
Kong, H., He, J., Gao, Y., Wu, H., and Zhu, X. (2011). Cosorption of Phenanthrene
And Mercury(II) From Aqueous Solution By Soybean Stalk-Based Biochar.
Journal of Agricultural Food Chemistry. 59: 12116-12123.
Korpiel, J. A. and Vidic, R. D. (1997). Effect of Sulfur Impregnation Method on
Activated Carbon Uptake of Gas-Phase Mercury. Environmental Science &
Technology. 31: 2319-2325.
Krishnan, S. V., Gullet, B. K., and Jozewicz, W. (1994). Sorption of Elemental
Mercury by Activated Carbons. Environmental Science & Technology. 28:
1506-1512.
Krishnani K. K. and Ayyappan S. (2006). Heavy Metals Remediation Of Water
Using Plants And Lignocellulosic Agrowastes, Reviews of Environmental
Contamination and Toxicology. 188: 59-84.
Kumar. G. and Gaur, J. P. (2011). Chemical Reaction- And Particle Diffusion-Based
Kinetic Modeling Of Metal Biosorption by a Phormidium sp.-Dominated
Cyanobacterial Mat. Bioresource Technology. 102(2): 633-640.
Kumar, P., Barrett, D. M., Delwiche, M. J., and Stroeve, P. (2009). Methods for
Pretreatment of Lignocellulosic Biomass for Efficient Hydrolysis and Biofuel
Production. Industrial & Engineering Chemistry Research. 48(8): 3713–3729.
Kumar, S., Loganathan, V. A., Gupta, R. B., and Barnett, M. O. (2011). An
Assessment of U(VI) Removal from Groundwater Using Biochar Produced
From Hydrothermal Carbonization. Journal of Environmental Management.
92: 2504-2512.
Lata, H., Garg, V. K., and Gupta, R. K. (2008). Adsorptiove Removal of Basic Dye
by Chemically Activated Parthenium Biomass: Equilibrium and Kinetic
Modeling. Desalination. 219: 250-261.
Le Cloirec, P. and Faur, C. Adsorption of Organic Compounds Onto Activated
Carbon- Applications In Water And Air Treatments. In: Teresa J. B. Activated
Carbon Surfaces In Environmental Remediation. New York, USA. 375-419;
2006.
Lee, S. H. and Park, Y. O. (2003). Gas-Phase Mercury Removal by Carbon–Based
Sorbents, Fuel Processing Technology. 84: 197-206.
Lee, S. H., Rhim, Y. J., Cho, S. P. and Baek, J. I. (2006b). Carbon-Based Novel
Sorbent For Removing Gas-Phase Mercury. Fuel. 85(2): 219–226.
176
Lee, S. J., Seo, Y. C., Jurng, J., and Lee, T. G. (2004). Removal of Gas-Phase
Elemental Mercury By Iodine And Chlorine-Impregnated Activated Carbon.
Atmospheric Environment. 38: 4887-4893.
Lee, S. S., Lee, J. Y., and Keener, T. C. (2009). Mercury Oxidation And Adsorption
Characteristics Of Chemically Promoted Activated Carbon Sorbents. Fuel
Processing Technology. 90: 1314-1318.
Lee, S. S., Lee, J. Y., and Keener, T. C. (2009a). Bench-Scale Studies Of In-Duct
Mercury Capture Using Cupric Chloride-Impregnated Carbons. Environmental
Science & Technology. 43: 2957-2962.
Lee, S. S., Lee, J. Y., and Keener, T. C. (2009b). The Effect Of Methods Of
Preparation On The Performance Of Cupric Chloride-Impregnated Sorbents
For The Removal Of Mercury From Flue Gas. Fuel. 88(10): 2053-2056.
Lee, S. and Park, Y. (2003). Gas Phase Mercury Removal by Carbon-Based
Sorbents. Fuel Processing Technology. 84: 197-206.
Lee, W. and Bae, G. N. (2009). Removal of Elemental Mercury (Hg(0)) by
Nanosized V2O5/TiO2 Catalysts. Environmental Science & Technology. 43:
1522-1527.
Li, H. Li, Y., Wu, C. Y., and Zhang, J. (2011a). Oxidation and Capture of Elemental
Mercury over SiO2,-TiO2-V2O5 Catalysts in Simulated Low-Rank Coal
Combustion Flue Gas, Chemical Engineering Journal. 169: 186-193.
Li, H., Wu, C. Y., Li, Y., and Zhang, J. (2011). CeO2-TiO2 Catalysts for Catalytic
Oxidation of Elemental Mercury in Low-Rank Coal Combustion Flue Gas.
Environmental Science & Technology. 45: 7394-7400.
Li, J. and Maroto-Valer, M. M. (2012). Computational and Experimental Studies of
Mercury Adsorption on Unburned Carbon Present In Fly Ash. Carbon. 50:
1913-1924.
Li, P., Feng, X. B., Qiu, G. L., Shang, L. H., and Li, Z. G. (2009). Mercury Pollution
in Asia: A Review of Contaminated Sites. Journal of Hazardous Materials.
168: 591-601.
Li, Y. H., Lee, C. W., and Gullet, B. K. (2003). Importance of Activated Carbon’s
Oxygen Surface Functional Groups on Elemental Mercury Adsorption. Fuel.
82: 451-457.
177
Li, Y. H., Lee, C. W., and Gullett, B. K. (2002). The Effect of Activated Carbon
Surface Moisture On Low Temperature Mercury Adsorption. Carbon. 40: 6572.
Li, Z., Wu, L., Liu, H., La, H., and Qu, J. (2013). Improvement of Aqueous Mercury
Adsorption on Activated Coke by Thiol-Functionalization. Chemical
Engineering Journal. 228: 925–934.
Liu, B., Zeng, L., and Ren, Q. (2010). Simulation of Levulinic Acid Adsorption In
Packed Beds Using Parallel Pore/Surface Diffusion Model. Chemical
Engineering & Technology. 33(7): 1146-1152.
Libra, J. A., Ro, K. S, Kammann, C., Funke, A., Berge, N. D, Neubauer, Y., Titirici,
M. M., Fühner, C., Bens, O., Kern, J., and Emmerich K. H. (2011).
Hydrothermal Carbonization of Biomass Residuals: A Comparative Review of
the Chemistry, Processes and Applications of Wet and Dry Pyrolysis. Biofuels.
2(1): 71-106.
Lillo-Ródenas, M. A., Cazorla-Amorós, D., and Linares-Solano, A. (2003).
Understanding Chemical Reactions between Carbons and NaOH and KOH. An
Insight into the Chemical Activation Mechanism. Carbon. 41: 267-275.
Lim, A. P. and Aris, A. Z. (2014). A Review on Economically Adsorbents on Heavy
Metals Removal in Water And Wastewaters. Reviews in Environmental
Science Biotechnology. 13: 163-181.
Lim, A. P. and Aris, A. Z. (2014a). Continuous Fixed-Bed Column Study And
Adsorption Modeling: Removal of Cadmium (II) and Lead (II) Ions in
Aqueous Solution by Dead Calcareous Skeletons. Biochemical Engineering
Journal. 87: 50-61.
Lim, W. C., Srinivasakannan, C., and Balasubramanian, N. (2010). Activation of
Palm Shells by Phosphoric Acid Impregnation for High Yielding Activated
Carbon. Journal of Analytical and Applied Pyrolysis. 88: 181–186.
Lindqvist, O., Jernelow, A., Hohansson, K., and Rodhe, H. (1984). Mercury in the
Swedish Environment: Global and Local Sources, National Swedish Protection
Board, Solna, Sweden.
Liu, W. and Vidic, R. D. (1998). Optimization of Sulfur Impregnation Protocol For
Fixed-Bed Application Of Activated Carbon-Based Sorbents For Gas-Phase
Mercury Removal. Environmental Science & Technology. 32: 531-538.
178
Liu, W., Vidic, R. D., and Brown, T. D. (1998). Optimization of Sulfur Impregnation
Protocol for Fixed-Bed Application of Activated Carbon-Based Sorbents for
Gas-Phase Mercury Removal. Environmental Science & Technology. 32: 531–
538.
Liu, W., Vidic, R. D., and Brown, T. D. (2000). Impact of Flue Gas Conditions On
Mercury Uptake By Sulfur-Impregnated Activated Carbon. Environmental
Science & Technology. 34: 154–159.
Lopes, C. B., Pereira, E., Lin, Z., Pato, P., Otero, M., Silva, C.M., Rocha, J., and
Duarte, A. C. (2011). Fixed-Bed Removal of Hg2+ From Contaminated Water
by Microporous Titanosilicate ETS-4: Experimental and Theoritical
Breakthrough Curves. Microporous and Mesoporous Materials. 145: 32-40.
Low, K. S., Lee, C. K. and Lee, P. L. (1997). Chromium(III) Sorption Enhancement
Through NTA—Modification Of Biological Materials. Bulletin of
Environmental Contamination Toxicology. 58(3): 380-386.
Lua, A. C. and Guo, J. (1998). Preparation and Characterization of Chars from Oil
Palm Waste. Carbon. 36(11): 1663-1670.
Luo, G., Yao, H., Xu, M., Cui, X., Chen, W., Gupta, R., and Xu, Z. (2010). Carbon
Nanotube-Silver Composite for Mercury Capture and Analysis. Energy Fuels.
24: 419-426.
Luo, J., Hein, A. M., and Hwang, J. Y. (2004). Adsorption of Vapor Phase Mercury
on Various Carbons. Journal of Mineral & Materials Characterization &
Engineering. 3(1): 13-22.
Luox, N. T. (1998). An assessment of Mercury-Species-Dependent Binding with
Natural Organic Carbon. Chemical Speciation & Bioavailability. 10(4): 127136.
Madaria, P. R., Mohan, N., Rajagopal, C., and Garg, B. S. (2004). Application of
Carbon Aerogel for Electrolytic Removal of Mercury from Aqueous Solutions.
Journal of Scientific & Industrial Research. 63: 938-943.
Makkuni, A., Bachas, L. G., Varma, R. S., Sikdar, S. K., and Bhattacharyya, D.
(2005). Aqueous and Vapor Phase Mercury Sorption by Inorganic Oxide
Materials Functionalized With Thiols and Poy-Thiols. Clean Technologies and
Environmental Policy. 7: 87-96.
179
Manchester, S., Wang, X., Kulaots, I., Gao, Y., and Hurt, R. H. (2008). High
Capacity Mercury Adsorption on Freshly Ozone-Treated Carbon Surfaces.
Carbon. 46(3): 518-524.
Manju, G. N., Raji, C., and Anirudhan, T. S. (1998). Evaluation of Coconut Husk
Carbon For The Removal Of Arsenic From Water. Water Research. 32(10):
3062-3070.
Manocha, S. M. (2003). Porous Carbons. Sadhana. 28(1&2), 335-348.
Maroto-Valer, M. M., Zhang, Y., Granite, E. J., Tang, Z., and Pennline, H. W.
(2005). Effect of Porous Structure and Surface Functionality on the Mercury
Capacity of a Fly Ash Carbon and Its Activated Sample. Fuel. 84: 105–108.
Mašek, O., Brownsort, P., Cross, A., and Sohi, S. (2013). Influence of Production
Conditions on the Yield and Environmental Stability of Biochar. Fuel. 103:
151-155.
Matisova, E. and Skrabakova, S. (1995). Review: Carbon Sorbents and Their
Utilization for the Preconcentration of Organic Pollutants in Environmental
Samples. Journal of Chromatography A. 707: 145-179.
Matsumura, Y. (1974). Adsorption of Mercury Vapor on the Surface of Activated
Carbons Modified By Oxidation or Iodization. Atmospheric Environment.8
(12): 1321–1327.
McBeath, A. V., Smernik, R. J., Schneider, M. P. W., and Schmidt, M. W. I. (2011).
Plant EL Determination of the Aromaticity and the Degree of Aromatic
Condensation of a Thermosequence of Wood Charcoal Using NMR. Organic
Chemistry. 42: 1194-1202.
McLarnon, C. R., Granite, E. J., and Pennline, H. W. (2005). The PCO Process for
Photochamical Removal of Mercury from Flue Gas. Fuel Processing
Technology. 87: 85-89.
Meena, A. K., Mishra, G. K., Rai, P. K., Rajagopal, C., and Nagar, P. N. (2005).
Removal of Heavy Metal Ions from Aqueous Solutions using Carbon Aerogel
as an Adosrbent. Journal of Hazardous Materials. B122: 161-170.
Mei, Z., Shen, Z., Wang, W., and Zhang, Y. (2008). Novel Sorbents of Non-MetalDoped Spinel CO3O4 for the Removal of Gas-Phase Elemental Mercury.
Environmental Science & Technology. 42: 590-595.
180
Mei, Z., Shen, Z., Zhao, Q., Wang, W., and Zhang, Y. (2008b). Removal and
Recovery Of Gas-Phase Element Mercury By Metal Oxide-Loaded Activated
Carbon, Journal of Hazardous Materials. 152: 721-729.
Mendelsohn, M. H., Grove, D., Huang, H. S., and Darien. (1999), Method For The
Removal Of Elemental Mercury From A Gas Stream. US Patent number
5900042.
Merrifield, J. D., Davids, W. G., MacRae, J. D., and Amirbahman, A. (2004). Uptake
of Mercury by Thiol-Grafted Chitosan Gel Beads. Water Research. 38: 31323138.
Meyer, D. E., Meeks, N., Sikdar, S., Hutson, N. D., Hua, D., and Bhattacharyya, D.
(2008). Copper-Doped Silica Materials Silanized with Bis-(Triethoxy Silyl
Propyl)-Tetra Sulfide for Mercury Vapor Capture. Energy Fuels. 22: 22902298.
Meyer, D. E., Sikdar, S. K., Hutson, N. D., and Bhattacharyya, D. (2007).
Examination of Sulfur-Functionalized, Copper-Doped Iron Nanoparticles for
Vapor-Phase Mercury Capture In Entrained-Flow and Fixed-Bed Systems.
Energy Fuels. 21: 2688-2697.
Meyer, S., Glaser, B., and Quicker, P. (2011). Technical, Economical, and ClimateRelated Aspects of Biochar Production Technologies: A Literature Review.
Environmental Science & Technology. 45: 9473-9483.
Mibeck, B. A. F., Olson, E. S., and Miller, S. J. (2009). HgCl2 Sorption on Lignite
Activated Carbon: Analysis of Fixed-Bed Results. Fuel Processing
Technology. 90: 1364–1371.
Miller, S. J., Dunham, G. E., Olson, E. S., and Brown, T. D. (2000). Flue Gas Effects
On Carbon-Based Mercury Sorbent. Fuel Processing Technology. 65-66: 343363.
Min, F., Zhang, M., Zhang, Y., Cao, Y., and Pan, W. P. (2011). An Experimental
Investigation into Gasification Reactivity and Structure of Agricultural Waste
Chars. Journal Analytical Applied Pyrolysis. 92: 250-257.
Miranda, R., Sosa, C., Bustos, D., Carrillo, E., and Rodríguez-Cantú, M.
Characterization of Pyrolysis Products Obtained During The Preparation Of
Bio-Oil And Activated Carbon, Lignocellulosic Precursors Used In The
Synthesis Of Activated Carbon - Characterization Techniques And
181
Applications In The Wastewater Treatment. In: Dr. Virginia Hernández
Montoya (Ed.), ISBN: 978-953-51-0197-0. 2012.
Mohan, D. and Jr. Pittman, C. U. (2006). Activated Carbons And Low Cost
Adsorbents For Remediation Of Tri-And Hexavalent Chromium From Water.
Journal of Hazardous Materials. B137: 762-811.
Mohan, D., Gupta, V. K., Srivastava, S. K., and Chander, S. (2001). Kinetics of
mercury adsorption from wastewater using activated carbon derived from
fertilizer waste. Colloids and Surfaces A: Physicochemical and Engineering
Aspects. 177: 169-181.
Monser, L. and Adhoum, N. (2002). Modified Activated Carbon For The Removal
Of Copper, Zinc, Chromium And Cyanide From Wastewater. Separation and
Purification Technology. 26: 137–146.
Montenegro, H. M. (1985). Coconut Oil and Its By-Products. Journal of the
American Oil Chemists Society. 62: 259-261.
Monterroso, R., Fan, M., and Argyle, M. Chapter 9: Mercury removal. In: David A.
B., Brian, F. T. and Maohong F. Coal Gasification and Its Applications.
Elsevier. 247-288. 2011.
Morán, J. I., Alvarez, V. A., Cyras, V. P., and Vázquez, A. (2008). Extraction of
Cellulose and Preparation of Nanocellulose from Sisal Fibers. Cellulose. 15:
149-159.
Morimoto, T., Wu, S., Uddin, M. A., and Sasaoka, E. (2005). Characteristics of the
Mercury Vapor Removal From Coal Combustion Flue Gas By Activated
Carbon Using H2S. Fuel. 84: 1968-1974.
Morris, E. A. Kirk, D. W. and Jia, C. Q. (2012). Roles of Sulfuric Acid in Elemental
Mercury Removal by Activated Carbon and Sulfur-Impregnated Carbon.
Environmental Science & Technology. 46: 7905-7912.
Mosier, N., Wyman, C., Dale, B., Elander, R., Lee, Y. Y., Holtzapple, M., and
Ladish, M. (2005). Features of Promising Technologies for Pretreatment of
Lignocellulosic Biomass, Bioresource Technology. 96(6): 673-686.
Namasivayam, C. and Kadirvelu, K. (1997). Activated Carbons Prepared From Coir
Pith By Physical And Chemical Activation Methods. Bioresource Technology.
62: 123-127.
182
Namasivayam, C. and Kadirvelu, K. (1997). Agricultural Solid Wastes For The
Removal Of Heavy Metals: Adsorption of Cu(II) by Coirpith Carbon.
Chemosphere. 34(2): 377-399.
Namasivayam, C. and Sangeetha, D. (2004). Equilibrium and Kinetic Studies of
Adsorption of Phosphate onto ZnCl2 Activated Coir Pith Carbon. Journal of
Colloid and Interface Science. 280: 359-365.
Namasivayam, C. and Sangeetha, D. (2005). Kinetic Studies of Adsorption of
Thiocyanate onto ZnCl2 Activated Carbon from Coir Pith, an Agricultural
Solid Waste. Chemosphere. 60: 1616–1623.
Namasivayam, C. and Sangeetha, D. (2008). Application of Coconut Coir Pith for
the Removal of Sulfate and Other Anions from Water. Desalination. 219: 1–
13.
Namasivayam, C. and Senthilkumar, S. (1997). Recycling of Industrial Solid Waste
for the Removal of Mercury (II) By Adsorption Process. Chemosphere. 34
(20): 357–375.
Namasivayam, C. and Sureshkumar M. V. (2006). Anionic Dye Adsorption
Characteristics of Surfactant Modified Coir Pith, a Waste Lignocellulosic
Polymer. Journal of Applied Polymer Science. 100: 1538–1546.
Newman, J. (2007). Core Facts about Coir. Citing internet sources URL:
http://www.GreenBeam.com.
Niksa, S., Helble, J. J., and Fujiwara, N. (2001). Kinetic Modeling Of Homogenous
Mercury Oxidation: The Importance of NO and H2O in Predicting Oxidation In
Coal-Derived Systems. Environmental Science & Technology. 35: 3701-3706.
Ofomaja, A. E. (2008). Sorptive Removal of Methylene Blue from Aqueous Solution
Using Palm Kernel Fibre: Effect of Fibre Dose. Biochemical Engineering
Journal. 40: 8–18
Okwadha, G. D. O., Li, J., Ramme, B., Kollakowsky, D., and Michaud, D. (2009).
Thermal Removal of Mercury in Spent Powdered Activated Carbon from
TOXECON Process, Journal of Environmental Engineering. 135: 1032-1040.
Olayinka, K. O., Alo, B. I., and Adu, T. (2007). Sorption of Heavy Metals from
Electroplating Effluents by Low-Cost Adsorbents II: Use of Waste Tea,
Coconut Shell, and Coconut Husk. Journal of Applied Science. 7(16): 23072313.
183
Orlando, U. S., Okuda, T., Baes, A. U., Nishijima, W., and Okada, M. (2003).
Chemical Properties Of Anion-Exchangers Prepared From Waste Natural
Materials. Reactive and Functional Polymers. 55: 311–318.
Otani, Y., Emi, H., Kanaoka, C., Uchijima, I., and Nishino, H. (1988). Removal of
Mercury Vapor from Air with Sulfur-Impregnated Adsorbents. Environmental
Science & Technology. 22(6): 708-711.
Ozao, R., Okabe, T., Nishimoto, Y., Cao, Y., Whitely, N., and Pan, W. P. (2005).
Gas and Mercury Adsorption Properties Of Woodceramics Made From
Chicken Waste. Energy Fuels. 19: 1729-1734.
Padak, B., Brunetti, M., Lewis, A., and Wilcox, J. (2006). Mercury Binding On
Activated Carbon. Environmental Progress. 25(4): 319-326.
Padhye, L. P., Hertzberg, B., Yushin, G., and Huang, C. H. (2011). N-Nitrosamines
Formation From Secondary Amines By Nitrogen Fixation On The Surface Of
Activated Carbon. Environmental Science & Technology. 45: 8368-8376.
Panda, R., Panda, H., Prakash, K., and Panda, A. (2010). Coconut. Science
Technology Entrepreneur. Citing internet sources URL: http://www.technopreneur.net.
Parab, H. and Sudersanan, M. (2010). Engineering a Lignocellulosic Biosorbent–
Coir Pith for Removal of Cesium from Aqueous Solutions: Equilibrium and
Kinetic Studies. Water Research. 40: 854-860.
Parab, H., Joshi, S., Shenoy, N. Lali, A., Sarma, U. S., and Sudersanan, M. (2008).
Esterified Coir Pith As An Adsorbent For The Removal Of Co(II) From
Aqueous Solution. Bioresource Technology. 99: 2083–2086
Parab, H., Joshi, S., Shenoy, N., Verma, R., Lali, A., and Sudersanan, M. (2005).
Uranium Removal from Aqueous Solution by Coir Pith: Equilibrium and
Kinetic Studies. Bioresource Technology. 96: 1241–1248.
Park, D., Yun, Y. S., and Park, J. M. (2010). The Past, Present, and Future Trends Of
Biosorption. Biotechnology and Bioprocess Engineering. 15: 86-102.
Park, K. S., Seo, Y. C., Lee, S. J., and Lee, J. H. (2008). Emission and Speciation Of
Mercury From Various Combustion Sources. Powder Technology. 180(1-2):
151-156.
Pavlish, J. H., Holmes, M. J., Benson, S. A., Crocker, C. R., and Galbreath, K. C.
(2004). Application of Sorbents for Mercury Control for Utilities Burning
Lignite Coal. Fuel Processing Technology. 85(6-7): 563-576.
184
Pavlish, J. H., Sondreal, E. A., Mann, M. D., Olson, E. S., Galbreath, K. C., Laudal,
D. L., and Benson, S. A. (2003). Status Review of Mercury Control Options
For Coal-Fired Power Plants. Fuel Processing Technology. 82: 89-165.
Phan, N. H., Rio, S., Faur, C., Coq, L. L., Cloirec, P. L., and Nguyen, T. H. (2006).
Production of Fibrous Activated Carbons from Natural Cellulose (Jute,
Coconut) Fibers for Water Treatment Applications. Carbon. 44: 2569-2577.
Phannenstiel, L. L., McKinley, C., and Sorensen, J. S. (1976). Mercury in Natural
Gas. Paper PAP76-T-12. Presented at American Gas Association, Operation
Section Transmission Conference, Las Vegas, Nevada, 3–5 May.
Pietrzak, R. and Bandosz, T. J. (2007). Activated Carbon Modified With Sewage
Sludge Derived Phase And Their Application In The Process of NO2 Removal.
Carbon. 45: 2537-2546.
Pirrone, N., Cinnirella, S., Feng, X., Finkelman, R. B., Friedli, H. R., Leaner, J.,
Mason, R., Mukherjee, A. B., Stracher, G. B., Streets, D. G., and Telmer, K.
(2010). Global Mercury Emissions to the Atmosphere from Anthropogenic and
Natural Sources. Atmosphere Chemistry and Physics. 10: 5951-5964.
Pirronea, N., Costaa, P., Pacynab, J. M., and Ferrara, R. (2001). Mercury Emissions
to The Atmosphere From Natural And Anthropogenic Sources In The
Mediterranean Region. Atmospheric Environment. 35: 2997–3006.
Pitoniak, E., Wu, C. Y., Londeree, D., Mazyck, D., Bonzongo, J. C., Powers, K., and
Sigmund, W. (2003). Nanostructured Silica-Gel Doped with TiO2 for Mercury
Vapor Control. Journal Nanoparticle Research. 5: 281-292
Poulston,S., Granite, E. J., Pennline, H. W., Myers, C. R., Stanko, D. P., Hamilton,
H., Rowsell, L., Smith, A. W. J., Iikenhas, T., and Chu, W. (2007). Metal
Sorbents for High Temperature Mercury Capture from Flue Gas. Fuel. 86:
2201-2203.
Presto, A. A. and Granite, E. J. (2007). Impact of Sulfur Oxides on Mercury Capture
by Activated Carbon. Environmental Science & Technology. 41: 6579-6584.
Pyrzynska, K. (2007). Application of Carbon Sorbents for the Concentration and
Separation of Metal Ions. Analytical Sciences. 23: 631-637.
Qiao, S., Chen, J., Li, J., Qu, Z., Liu, P., Yan, N., and Jia, J. (2009). Adsorption and
Catalytic Oxidation of Gaseous Elemental Mercury in Flue Gas over
MnOx/Alumina. Industrial & Engineering Chemistry Research. 48: 3317-3322.
185
Qiao, W., Korai Y., Mochida I., Horib Y., and Maedab T. (2002). Preparation of an
Activated Carbon Artifact: Oxidative Modification of Coconut Shell-Based
Carbon to Improve the Strength. Carbon. 40: 351–358.
Qiu, H., Lu, L. V., Pan, B. C., Zhang, Q. J., Zhang, W. M., and Zhang, Q. X. (2009).
Critical Review in Adsorption Kinetic Models. Journal of Zhejiang University
SCIENCE A. 10(5): 716-724.
Qu, Z., Yan, N., Liu, P., Jia, J., and Yang, S. (2010). The Role of Iodine
Monochloride for the Oxidation of Elemental Mercury. Journal of Hazardous
Materials. 183: 132-137.
Quek, S. Y. and Al-Duri, B. (2007). Application of Film-Pore Diffusion Model for
the Adsorption of Metal Ions on Coir in a Fixed-Bed Column. Chemical and
Engineering Process. 46: 477-485.
Rahman, M. M. and Khan, M. A. (2007). Surface Treatment of Coir (Cocos
nucifera) Fibers and Its Influence on the Fibers’ Physico-Mechanical
Properties. Composites Science and Technology. 67: 2369-2376.
Ramadan, H., Ghanem, A., and El-Rassy, H. (2010). Mercury Removal From
Aqueous Solutions Using Silica, Polyacrylamide And Hybrid Silica
Polyacrylamide Aerogels. Chemical Engineering Journal. 159: 107-115.
Randall, P. and Chattopadhyay, S. (2004). Advances in Encapsulation Technologies
for the Management of Mercury-Contaminated Hazardous Wastes. Journal of
Hazardous Materials. B114: 211-223.
Rangel-Mendez, J. R. and Streat, M. (2002). Mercury and Cadmium Sorption
Performance of a Fibrous Ion Exchanger and Granular Activated Carbon.
Process Safety and Environmental Proctection. 80(3): 150-158.
Raveendran, K. and Ganesh, A. (1998). Adsorption Characteristics and PoreDevelopment of Biomass-Pyrolysis Char. Fuel. 77(7): 769-781.
Reddy, K. S. K., Al Shoaibi, A., and Srinivasakannan, C. (2014). Elemental Mercury
Adsorption on Sulfur-Impregnated Porous Carbon – A Review. Environmental
Technology. 35(1): 18-26.
Ren, J. Zhou, J. Luo, Z., Zhong, Y., and Xu, Z. Fixed bed experimentas and
mathematical modeling for adsorption of mercury vapor. International
Conference on Power Engineering. October 23-27, 2007. Hangzhou, China.
843-849.
186
Rodriguez-Perez, J., Lopez-Anton, M. A., Diaz-Somano, M., Garcia, R., and
Martinez-Tarazona, M. R. (2011). Development of Gold Nanoparticle-Doped
Activated Carbon Sorbent For Elemental Mercury. Energy Fuels. 25: 20222027.
Romero-Anaya, A. J., Lillo-Rodenas, M. A., Salinas-Martinez de Lecea, C., and
Linares-Solano, A. (2012). Hydrothermal and Conventional H3PO4 Activation
of Two Natural Bio-Fibers. Carbon. 50(9): 3158-3169.
Rout, J., Tripathy, S. S., Nayak, S. K., Misra, M., and Mohanty, A. K. (2001).
Scanning Electron Microscopy Study of Chemically Modified Coir Fibers.
Journal Applied Polymer Science. 79(7): 1169-1177.
Sag, Y. and Kutsal, T. (2001). Recent Trends in the Biosorption of Heavy Metals: A
Review. Biotechnology and Bioprocess Engineering. 6: 376-385.
Saman, N., Johari, K., and Mat, H. (2015). Removal of Elemental Mercury From Gas
Stream Using Sulfur-Functionalized Silica Microspheres (S-SMs). Clean
Technologies and Environmental Policy. 17(1): 39-47.
Saman, N., Johari, K., Song, S. T., and Mat, H. (2014). Removal of Hg(II) and
Ch3Hg(I) Using Rasped Pith Sago Residue Biosorbent. Clean – Soil, Air,
Water. 11(1): 1541-1548.
Sarin, V., Singh, T. S., and Pant, K. K. (2006). Thermodynamic and Breakthrough
Column Studies For the Selective Sorption of Chromium from Industrial
Effluent on Activated Eucalyptus Bark. Bioresource Technology. 97: 19861993.
Scala, F. (2001). Simulation of Mercury Capture By Activated Carbon Injection In
Incinerator Flue Gas. 2. Fabric Filters Removal. Environmental Science &
Technology. 35: 4373–4378.
Scala, F., Anacleria, A., and Cimino, S. (2013). Characterization of Regenerable
Sorbent For High Temperature Elemental Mercury Capture from Flue Gas.
Fuel. 108: 13-18.
Scala, F., Chirone, R., and Lancia, A. (2011). Elemental Mercury Vapor Capture by
Powdered Activated Carbon in a Fluidized Bed Reactor. Fuel. 90: 2077-2082.
Schneider, R. M., Cavalin, C. F., Barros, M. A. S. D. and Tavares, C. R. G. (2007).
Adsorption of Chromium Ions in Activated Carbon. Chemical Engineering
Journal. 132: 355–362.
187
Sekar, M., Sakthi, V., and Rengaraj, S. (2004). Kinetics and Equilibrium Adsorption
Study Of Lead (II) Onto Activated Carbon Prepared From Coconut Shell.
Journal of Colloid and Interface Science. 279(2): 307-313.
Seneviratne, H. R., Charpenteau, C., George, A., Millan, M., Dugwell, D. R., and
Kandiyoti, R. (2007). Ranking Low Cost Sorbents for Mercury Capture from
Simulated Flue Gases. Energy Fuels. 21: 3249-3258.
Serre, S. D. and Silcox, G. D. (2000). Adsorption of Elemental Mercury on the
Residual Carbon in Coal Fly Ash. Industrial & Engineering Chemistry
Research. 39: 1723–1730
Shadbad, M. J., Mohebbi A., and Soltani A. (2011). Mercury(II) Removal From
Aqueous Solutions By Adsorption On Multi-Walled Carbon Nanotubes.
Korean Journal of Chemical Engineering. 28(4): 1029-1034
Shafawi, A., Ebdon, L., Foulkes, M., Stockwell, P., and Corns, W. (1999).
Determination of Total Mercury in Hydrocarbons and Natural Gas Condensate
by Atomic Fluorescence Spectrometry. Analyst. 124: 185-189.
Shafawi, A., Ebdon, L., Foulkes, M., Stockwell, P., and Corns, W. (2000).
Preliminary Evaluation of Adsorbent-Based Mercury Removal Systems for
Gas Condensate. Analytica Chimica Acta. 415: 21-32.
Shah, I. K., Pre, P., and Alappat, B. J. (2013). Steam Regeneration of Adsorbents: An
Experimental and Technical Review. Chemical Science Transactions. 2(4):
1078-1088.
Shareef, K. M. (2009). Sorbents for Contaminants Uptake from Aqueous Solutions.
Part I: Heavy Metals. World Journal of Agricultural Sciences. 5(S): 819-831.
Sharma, P. K., Ayub, S., and Tripathi, C. N. (2013). Agro and Horticultural Wastes
as Low Cost Adsorbents for Removal of Heavy Metals from Wastewater: A
Review. International Refereed Journal of Engineering and Science. 2(8): 1827.
Sharma, Y. C., Uma, and Upadhyay, S. N. (2009). Removal of a Cationic Dye From
Wastewaters By Adsorption On Activated Carbon Developed From Coconut
Coir. Energy Fuels. 23: 2983-2988.
Shen, Y. S., Wang, S. L., Tzou, Y. M., Yan, Y. Y., and Kuan, W. H. (2012).
Removal of Hexalent Cr by Coconut Coir and Derived Chars–The Effect of
Surface Functionality. Bioresource Technology. 104: 165-172.
188
Shen, Z., Ma, J., Mei, Z., and Zhang, J. (2010). Metal Chlorides Loaded On
Activated Carbon to Capture Elemental Mercury. Journal of Environmental
Sciences. 22(11): 1814-1819.
Shiels, D. O. (1929). The Adsorption of Mercury Vapour by Activated Charcoal.
Chemistry Department, University of Melbourne. 1398-1402.
Shu, T., Lu, P., and He, N. (2013). Mercury Adsorption of Modified Mulberry Twig
Chars in a Simulated Flue Gas, Bioresource Technology. 136: 182-187.
Shukla, S. R., Pai, R. S., and Shendarkar, A. D. (2006). Adsorption of Ni(II), Zn(II),
and Fe(II) on Modified Coir Fibers. Separation and Purification Technology.
47: 141-147.
Sikkema, J. K., Alleman, J. E., Ong, S. K., and Wheelock, T. D. (2011). Mercury
Regulation, Fate, Transport, Transformation, and Abatement within Cement
Manufacturing Facilities: Review. Science of the Total Environment. 409:
4167-4178.
Silbergeld, E. K. and Devine, P. J. (2000). Mercury–Are We Studying The Right
Endpoints And Mechanisms. Fuel Processing Technology. 65-66: 35-42.
Singh, K. P., Malik, A., Sinha, S., and Ojha, P. (2008). Liquid-Phase Adsorption Of
Phenols Using Activated Carbons Derived From Agricultural Waste Material.
Journal of Hazardous Materials. 150: 626–641.
Skodras, G., Diamantopolou, Ir., Zabaniotou, A., Stavropoulos, G., and
Sakellaropoulos, G. P. (2007). Enhanced mercury adsorption in activated
carbons from biomass materials and waste tires. Fuel Processing Technology.
88: 749-758.
Skodras, G., Diamantopoulou, I., Pantoleontos, G., and Sakellaropoulos, G. P.
(2008). Kinetic Studies of Elemental Mercury Adsorption In Activated Carbon
Fixed Bed Reactor, Journal of Hazardous Materials. 158: 1-13.
Skodras, G., Diamantopoulou, Ir., and Sakellaropoulos, G. P. (2007). Role of
Activated Carbon Structural Properties and Surface Chemistry in Mercury
Adsorption. Desalination. 210: 281–286.
Sondreal, E. A., Benson, S. A., Pavlish, J. H., and Ralston, N. V. C. (2004). An
Overview of Air Quality III: Mercury, Trace Elements, and Particulate Matter.
Fuel Processing Technology. 85: 425-440.
189
Song, J., Zou, W., Bian, Y., Su, F., and Han, R. (2011). Adsorption characteristics of
methylene blue by peanut husk in batch and column modes. Desalination. 265:
119-125.
Song, S. T., Saman, N., Johari, K., and Mat, H. (2013). Removal of Hg(II) from
Aqueous Solution By Adsorption Using Raw And Chemically Modified Rice
Straw As Novel Adsorbents. Industrial & Engineering Chemistry Research.
52(36): 13092–13101.
Song, S. T., Saman, N., Johari, K., and Mat, H. (2013a). Removal of Mercury (II)
from Aqueous Solution by Using Rice Residues, Jurnal Teknologi (Science
Engineering). 63(1): 67-73.
Sousa, F. W., Olivera, A. G., Ribeiro, J. P., Rosa, M. F., Keukeleire, D., and
Nascimento, R. F. (2010). Green Coconut Shells Applied As Adsorbent For
Removal Of Toxic Metal Ions Using Fixed-Bed Column Technology. Journal
of Environmental Management. 91: 1634-1640.
Spiric, Z. Innovative Approach to the Mercury Control During Natural Gas
Processing. Proceedings of the ETCE, Engineering Technology Conference.
February 5-7, 2001. Energy, Houston, Texas.
Sreedhar, M. K. and Anirudhan, T. S. (2000). Preparation of an Adsorbent By Graft
Polymerization Of Acrylamide Onto Coconut Husk For Mercury (II) Removal
From Aqueous Solution And Chloralkali Industry Wastewater. Journal of
Applied Polymer Science. 75: 1261-1269.
Sreekala, M. S., Kumaran, M. G., and Thomas, S. (1997). Oil Palm Fibers:
Morphology, Chemical Composition, Surface Modification, and Mechanical
Properties. Journal of Applied Polymer Science. 66: 821-835.
Sreenivasan, S., Iyer, P. B., and Iyer, K. R. K. (1996). Influence of Delignification
and Alkali Treatment on the Fine Structure of Coir Fibers (Cocos nucifera).
Journal of Materials Science. 31: 721-726.
Srivastava, V. C., Mall, I. D., and Mishra, I. M. (2008). Adsorption of Toxic Metal
Ions onto Activated Carbon. Study of Sorption Behaviour through
Characterization and Kinetics. Chemical Engineering and Processing. 47:
1269-1280.
Steiner, S. A. III., Baumann, T. F., Kong, J., Jr. Satcher, J. H., and Dresselhaus, M.
S. (2007). Iron-Doped Carbon Aerogels: Novel Porous Substrates for Direct
Growth of Carbon Nanotubes. Langmuir. 23: 5161-5166.
190
Suarez-Ruiz, I. and Parra, J. B. (2007). Relationship Between Textural Properties,
Fly Ash Carbons, And Hg Capture In Fly Ashes Derived From The
Combustion Of Anthracitic Pulverized Feed Blends. Energy Fuels. 21: 1915–
1923.
Suksabye, P., Thiravetyan, P., and Nakbanpote, W. (2008). Column Study of
Chromium (VI) Adsorption from Electroplating Industry by Coconut Coir
Pith. Journal of Hazardous Materials. 160: 56-62.
Sumathi, K. M. S., Mahimairaja, S., and Nandu, R. (2005). Use of Low-Cost
Biological Wastes and Vermiculite for Removal of Chromium from Tannery
Effluent. Bioresource Technology. 96(3): 309-316.
Sun, C., Snape, C. E., and Liu, H. (2013). Development of Low-Cost Functional
Adsorbents for Control of Mercury (Hg) Emissions from Coal Combustion.
Energy Fuels. 27: 3875-3882.
Suryavanshi, U. S. and Shukla S. R. (2009). Adsorption of Ga(III) on Oxidized Coir.
Industrial & Engineering Chemistry Research. 48: 870–876.
Suzuki, M. Adsorption Engineering. Japan. Kodansha Ltd. Elsevier Science. 1990.
Tagliabue, M., Farrusseng, D., Valencia, S., Aguado, S., Ravon, U., Rizzo, C.,
Corma, A., and Mirodatos, C. (2009). Natural Gas Treating By Selective
Adsorption: Material Science and Chemical Engineering Interplay. Chemical
Engineering Journal. 155: 553-566.
Takenami, J., Uddin, M. A., Sasaoka, E., Shioya, Y., and Takase, T. (2009).
Removal of Elemental Mercury from Dry Methane Gas with Manganese
Oxides. World Academy of Science, Engineering and Technology. 56: 26-30.
Tan, I. A. W., Ahmad, A. L., and Hameed, B. H. (2008). Adsorption of Basic Dye
On High-Surface-Area Activated Carbon Prepared From Coconut Husk:
Equilibrium, Kinetic And Thermodynamic Studies. Journal of Hazardous
Materials. 154: 337-346.
Tan, I. A. W., Ahmad, A. L., and Hameed, B. H. (2008a). Preparation of Activated
Carbon From Coconut Husk: Optimization Study On Removal of 2,4,6Trichlorophenol Using Response Surface Methodology. Journal of Hazardous
Materials. 153: 709-717.
Tan, Z., Qiu, J., Zeng, H., Liu, H., and Xiang, J. (2011). Removal of Elemental
Mercury By Bamboo Charcoal Impregnated With H2O2. Fuel. 90: 1471-1475.
191
Tan, Z., Sun, L., Xiang, J., Zeng, H. Liu, Z., Hu, S., and Qiu, J. (2012). Gas-Phase
Elemental Mercury Removal by Novel Carbon-Based Sorbents. Carbon. 50:
362-371.
Tawabini, B., Al-Khaldi, S., Atieh, M. and Khaled, M. (2010). Removal of Mercury
From Water By Multi-Walled Carbon Nanotubes. Water Science and
Technology. 61: 591-598.
Tay, J. H., Chen, X. G., Jeyaseelan, S., and Graham, N. (2001). Optimising the
Preparation of Activated Carbon from Digested Sewage Sludge and Coconut
Husk. Chemosphere. 44: 45-51.
Taylor, R. W., Hassan, K., Mehadi, A. A., and Shuford, J. W. (1995). Kinetics of
Zinc Sorption by Soils. Communications in Soil Science and Plant Analysis.
26(11&12): 1761-1771.
Tian, L., Li, C., Li, Q., Zeng, G., Gao, Z., Li, S., and Fan, X. (2009). Removal of
Elemental Mercury By Activated Carbon Impregnated With CeO2. Fuel. 88(9):
1687-1691.
Tomczak, F., Sydenstricker, T. H. D., and Satyanarayana, K. G. (2007). Studies on
lignocellulosic fibers of Brazil. Part II: Morphology and Properties of Brazilian
Coconut Fibers. Composites: Part A. 38: 1710-1721.
Trgo, M., Vukojevic, N., and Peric, J. (2011). Application of Mathematical
Empirical Models to Dynamic Removal of Lead on Natural Zeolite
Clinoptilolite in a Fixed Bed Column. Indian Journal of Chemical Technology.
18: 123-131.
Tupkanjana, P. and Phalakornkule, C. (2007). Development of Activated Carbons
From Sunflower Seed Husk For Metal Adsorption. Journal of Chemical
Engineering of Japan. 40 (3): 222–227.
U.S. E.P.A. (1997). Mercury study report to congress: Volume VI: An ecological
assessment for anthropogenic mercury emissions in the United States.
U.S. E.P.A. (2001). Research and Development-Mercury in Petroleum and Natural
Gas: Estimation of Emissions from Production, Processing, And Combustion.
Report Reviewed by the U.S. Environmental Protection Agency.
U.S. E.P.A. (2005). Control of mercury emissions from coal fired electric utility
boilers: An update. Citing internet sources URL:
http://www.epa.gov/ttn/atw/utility/ord_whtpaper_hgcontroltech_oar_2002_005
6_6141.pdf.
192
U.S. E.P.A. (2007). Background paper for stakeholder panel to address options for
managing U.S. non-federal supplies of commodity-grade mercury. Citing
internet sources URL: http://www.epa.gov/mercury/
stocks/backgroundpaper.pdf.
U.S. E.P.A. (2014). Mercury and Air Toxics Standards (MATS), Citing internet
sources URL: http://www.epa.gov/mats/powerplants.html.
Ucol-Ganiron Jr, T. (2013). Recycling of Waste Coconut Shells as Substitute for
Aggregates in Mix Proportioning of Concrete Hollow Blocks. WSEAS
Transactions on Environment and Development. 4(9): 290-300.
Uddin, M. A., Yamada, T., Ochiai, R. and Sasaoka, E. (2008). Role of SO2 for
Elemental Mercury Removal from Coal Combustion Flue Gas by Activated
Carbon. Energy Fuels. 22 (4): 2284–2289.
Unnithan, M. R., Vinod, V. P., and Anirudhan, T. S. (2004). Synthesis,
Characterization, and Application as a Chromium (VI) Adsorbent of AmineModified Polyacrylamide-Grafted Coconut Coir Pith. Industrial & Engineering
Chemistry Research. 43: 2247-2255.
Valenzuela-Calahorro, C., Macías-García, A., Bernalte-García, A., and GómezSerrano, V. (1990). Study of Sulfur Introduction in AC. Carbon. 28: 321–335.
Vidic, R. D. and McLaughlin, J. B. (1996). Uptake of Elemental Mercury Vapors By
Activated Carbons. Journal of the Air & Waste Management Association. 46:
241-250.
Vidic, R. D. and Siler, D. P. (2001). Vapor-Phase Elemental Mercury Adsorption By
Activated Carbon Impregnated With Chloride And Chelating Agents. Carbon.
39: 3–14.
Vidic, R. D., Chang, M. T., and Thurnau, R. C. (1998). Kinetics of Vapor-Phase
Mercury Uptake By Virgin And Sulfur-Impregnated Activated Carbons.
Journal of the Air & Waste Management Association. 48: 247-255.
Vitolo, S. and Seggiani, M. (2002). Mercury Removal from Geothermal Exhaust Gas
By Sulfur-Impregnated And Virgin Activated Carbons. Geothermics. 31: 431–
442.
Wan Daud, W. M. A., Wan Ali, A. S., and Sulaiman, M. Z. (2001). Effect of
Carbonization Temperature On The Yield And Porosity Of Char Produced
From Palm Shell. Journal Chemistry Technology Biotechnology. 76(12): 1281–
1285.
193
Wan, W., Duan, L., He, K., and Li, J. (2011). Removal of Gaseous Elemental
Mercury Over A CeO2-WO3/TiO2 Nanocomposite In Simulated Coal-Fired
Flue Gas. Chemical Engineering Journal. 170: 512-517.
Wang, H., Zhou, S., Xiao, L., Wang, Y., Liu, Y., and Wu, Z. (2011). Titania
Nanotubes-A Unique Photocatalyst and Adsorbent for Elemental Mercury
Removal. Catalysis Today. 175: 202-208.
Wang, J. Deng, B. Wang, X., and Zheng, J. (2009). Adsorptions of Aqueous Hg(II)
by Sulfur Impregnated Activated Carbon. Environmental Engineering Science.
26: 1693–1699.
Wang, J., Yang, J., and Liu, Z. (2010). Gas-Phase Elemental Mercury Capture by a
V2O5/AC Catalyst. Fuel Processing Technology. 91: 676-680.
Wang, Q., Kim, D., Dionysiou, D. D., Sorial, G. A., and Timberlake. (2004). Sources
and Remediation for Mercury Contamination in Aquatic Systems-A Literature
Review. Environmental Pollution. 131: 323-336.
Wen, X., Li, C., Fan, X., Gao, H., Zhang, W., Chen, L., Zeng, G., and Zhao, Y.
(2011). Experimental Study of Gaseous Elemental Mercury Removal with
CeO2/γ-Al2O3. Energy Fuels. 25: 2939-2944.
Wilcox, J., Rupp, E., Ying, S. C., Lim, D. H., Negreira, A. S., Kirchofer, A., Feng,
F., Lee, K. (2012). Mercury Adsorption and Oxidation in Coal Combustion and
Gasification Processes. International Journal of Coal Geology. 90-91: 4-20.
Wilhelm, S. M. and Bloom, N. (2000). Mercury in Petroleum. Fuel Processing
Technology. 63: 1–27.
Wu, B., Peterson, T. W., Shadman, F., Senior, C. L., Morency, J. R., Huggins, F. E.,
and Huffman, G. P. (2000). Interactions between Vapor-Phase Mercury
Compounds and Coal Char in Synthetic Flue Gas. Fuel Processing
Technology. 63: 93-107.
Wu, S., Uddin, M. A., and Sasaoka, E. (2006). Characteristics of the Removal of
Mercury Vapor in Coal Derived Fuel Gas over Iron Oxide Sorbents. Fuel. 85:
213-218.
Xu, W., Wang, H., Zhu, T., Kuang, J., and Jing, P. (2013). Mercury Removal from
Coal Combustion Flue Gas by Modified Fly Ash. Journal of Environmental
Sciences. 25(2): 393-398.
194
Xu, X., Gao, B., Tan, X., Zhang, X., Yue, Q., Wang, Y., and Li, Q. (2013a). Nitrate
adsorption by stratified wheat straw resin in lab-scale columns. Chemical
Engineering Journal. 226: 1-6.
Xu, Y., Zhong, Q., and Xing, L. (2014).Gas-Phase Elemental Mercury Removal
From Flue Gas By Cobalt-Modified Fly Ash at Low Temperatures.
Environmental Technology. 35(22): 2870-2877.
Xu, Z., Cai, J-G., Pan, B.C. (2013b). Mathematically Modeling Fixed-Bed
Adsorption in Aqueous Systems. Journal of Zhejiang University SCIENCE A.
14(3): 155-176.
Yaman, S. (2004). Pyrolysis of Biomass to Produce Fuels and Chemical Feedstocks.
Energy Conversion and Management. 45: 651-671.
Yan, N., Chen, W., Chen, J., Qu, Z., Guo, Y., Yang, S., and Jia, J. (2011).
Significance of RuO2 Modified SCR Catalyst for Elemental Mercury Oxidation
in Coal-Fired Flue Gas. Environmental Science & Technology. 45: 5725-5730.
Yan, R., Liang, D. T., Tsen, L., Wong, Y. P., and Lee, Y. K. (2004). Bench-Scale
Experimental Evaluation of Carbon Performance on Mercury Vapour
Adsorption. Fuel. 83: 2401-2409.
Yang, S., Guo, Y., Yan, N., Qu, Z., Xie, J., Yang, C., and Jia, J. (2011). Capture of
Gaseous Elemental Mercury From Flue Gas Using A Magnetic And Sulfur
Poisoning Resistant Sorbent Mn/γ-Fe2O3 At Lower Temperatures. Journal of
Hazardous Materials. 186: 508-515.
Yao, Y., Velpari, V., and Economy, J. (2014). Design of Sulfur Treated Activated
Carbon Fibers for Gas Phase Elemental Mercury Removal. Fuel. 116: 560-565.
Yardim, M. F., Budinova, T., Ekinci, E., Petrov, N., Razvigorova, M., and Minkova,
V. (2003). Removal of Mercury (II) From Aqueous Solution By Activated
Carbon Obtained From Furfural. Chemosphere. 52: 835–841.
Yi, Z., Yao, J., and Ma, X. Y. (2012). Absorption Behavior and Removal of Gaseous
Elemental Mercury by Sodium Chlorite Solutions. Journal Environmental
Engineering. 138: 620-624.
Yin, C. H., Aroua, M. K., and Daud, W. M. A. W. (2007). Review of Modifications
of Activated Carbon for Enhancing Contaminant Uptakes from Aqueous
Solutions. Separation and Purification Technology. 52: 403–415.
195
Yu, Y., Addai-Mensah, J., and Losic, D. (2012). Functionalized Diatom Silica
Microparticles For Removal Of Mercury Ions. Science and Technology of
Advanced Materials. 13: 1-11
Yuen, F.K. and Hameed, B.H. (2009). Recent Developments in the Preparation and
Regeneration of Activated Carbons by Microwaves. Advances in Colloid
Interface Science. 149: 19-27.
Yun, C. H., Park, Y. H., and Park, C. R. (2001). Effects of Pre-Carbonization On
Porosity Development Of Activated Carbons From Rice Straw. Carbon. 39:
559-567.
Zhang, F. S., Nriagu, J. O., and Itoh, H. (2005). Mercury Removal From Water
Using Activated Carbons Derived From Organic Sewage Sludge. Water
Research. 39: 389-395.
Zhang, H., Zhao, J., Fang, Y., Huang, J., and Wang, Y. (2012). Catalytic Oxidation
And Stabilized Adsorption Of Elemental Mercury From Coal-Derived Fuel
Gas. Energy Fuels. 26: 1629-1637.
Zhang, J., Zhang, H., and Zhang, J. (2014). Evaluation of Liquid Ammonia
Treatment on Surface Characteristics of Hemp Fiber. Cellulose. 21(1): 569579.
Zhao, P., Guo. X., and Zheng, C. (2010). Removal of Elemental Mercury by IodineModified Rice Husk Ash Sorbents. Journal of Environmental Sciences. 2(10):
1629-1636.
Zhu, J., Deng, B., Yang, J., and Gang, D. (2009). Modifying Activated Carbon With
Hybrid Ligands For Enhancing Aqueous Mercury Removal. Carbon. 47: 20142025.
Zuim, D. R., Carpine, D., Distler, G. A. R., Scheer, A. P., Igarashi-Mafra, L., and
Mafra, M. R. (2011). Adsorption of Two Coffee Aromas From Synthethic
Aqueous Solution Onto Granular Activated Carbon Derived From Coconut
Husks. Journal of Food Engineering. 104: 284-292.