PrismaView Management Application Software Installation Instructions Introduction
advertisement
PrismaView Management Application Software Installation Instructions Introduction The PrismaView™ management application software gives network managers the ability to monitor and control Prisma™ MediaCenter™ products. PrismaView can function as a standalone simple network management protocol (SNMP) management application, or can integrate with Hewlett-Packard OpenView Network Node Manager (NNM). There are also versions of PrismaView that run as a web server to enable network management from a standard web browser. Purpose This document provides instructions for installing PrismaView network management application software under a Windows or Unix (or Unix-type) operating system. Qualified Personnel Only appropriately qualified and skilled service personnel should attempt to install, operate, maintain, and service this product. WARNING: Allow only qualified and skilled personnel to install, operate, maintain, and service this product. Otherwise, personal injury or equipment damage may occur. Introduction In This Document 2 Safe Operation for Software Controlling Optical Transmission Equipment ...................................................................................................................3 System Requirements.................................................................................................4 Installing PrismaView on Windows ........................................................................5 Installing PrismaView on Unix (or Equivalent) .....................................................6 For Information ...........................................................................................................7 4006062 Rev B Safe Operation for Software Controlling Optical Transmission Equipment Safe Operation for Software Controlling Optical Transmission Equipment If this manual discusses software, the software described is used to monitor or control our and other vendors’ electrical and optical equipment designed to transmit video, voice, or data signals. Certain safety precautions should be observed when operating equipment of this nature. For equipment specific safety requirements, refer to the appropriate section of the equipment documentation. For safe operation of this software, refer to the following warnings. WARNING: 4006062 Rev B Ensure that all optical connections are complete or terminated before using this equipment to remotely control a laser device. An optical or laser device can pose a hazard to remotely located personnel when operated without their knowledge. Allow only personnel trained in laser safety to operate this software. Otherwise, injuries to personnel may occur. Restrict access of this software to authorized personnel only. Install this software in equipment that is located in a restricted access area. 3 System Requirements System Requirements Windows Versions 29 MB Free Disk Space (full installation), 64 MB RAM Windows NT 4.0 Service Pack 5 Windows 2000 Professional Windows XP Microsoft SNMP Services installed Microsoft IE 4.0 or higher installed (does not have to be default browser) Microsoft Internet Information Server (IIS) required for Web Server version Java Versions 25 MB Free Disk Space (Full Installation), 64 MB RAM Any operating system capable of running Java. (i.e., Windows 98 or above, Solaris, Linux) Java Runtime version 1.3 or higher Strongly Recommended 128 MB RAM 650 MHz or faster processor 17" monitor with 1024 x 768 or higher resolution 4 4006062 Rev B Installing PrismaView on Windows Installing PrismaView on Windows Note: If a previous version of PrismaView is installed on the management machine, remove all files before proceeding. Complete the following steps to install PrismaView software for Windows. 1 Insert the PrismaView CD into your CD-ROM drive (usually drive D:). The installation utility launches automatically. If the installation utility does not launch automatically, perform the following alternate steps: a Using the Windows Start menu, choose Start, Run, and then Browse. b Locate the PrismaView installation file launch.exe in the CD-ROM directory. c Click Open. d In the Run dialog box, click OK. The PrismaView installation wizard opens. 2 Click Install Products, and then click the button that applies to the PrismaView product that you wish to install. The applicable installation program launches and guides you through the remaining steps of installation. Note: In addition to PrismaView installations, the CD-ROM also contains installations for HubControl 32 and iConfig. 4006062 Rev B 5 Installing PrismaView on Unix (or Equivalent) Installing PrismaView on Unix (or Equivalent) The PrismaView CD-ROM contains the following installation file in the \Bin\Java directory: PrismaView_Java_1_8.2.tar is the installation file for the PrismaView Java standalone application 1.8.2 or higher. Prismaview_readme is the accompanying "readme" file. PrismaView_Java_Servlet_1_8_2.tar is the installation file for the PrismaView Servlet. PrismaView_servlet_readme is the accompanying "readme" file. Copy these files to a local directory and follow the instructions in the applicable "readme" file. If you are unsure which version of PrismaView software is right for you, please contact customer support. Refer to For Information (on page 7) for contact information. 6 4006062 Rev B For Information For Information Support Telephone Numbers This table lists the Technical Support and Customer Service numbers for your area. Region Centers North America Cisco Services Atlanta, Georgia United States Telephone and Fax Numbers For Technical Support, call: Toll-free: 1-800-722-2009 Local: 678-277-1120 (Press 2 at the prompt) For Customer Service or to request an RMA number, call: Europe, Middle East, Africa Belgium Toll-free: 1-800-722-2009 Local: 678-277-1120 (Press 3 at the prompt) Fax: 770-236-5477 E-mail: customer.service@sciatl.com For Technical Support, call: Telephone: 32-56-445-197 or 32-56-445-155 Fax: 32-56-445-061 For Customer Service or to request an RMA number, call: Telephone: 32-56-445-444 Fax: 32-56-445-051 E-mail: elc.service@sciatl.com Japan Japan Telephone: 81-3-5908-2153 or +81-3-5908-2154 Fax: 81-3-5908-2155 E-mail: yuri.oguchi@sciatl.com Korea Korea Telephone: 82-2-3429-8800 Fax: 82-2-3452-9748 E-mail: kelly.song@sciatl.com China (mainland) China Telephone: 86-21-2401-4433 Fax: 86-21-2401-4455 E-mail: xiangyang.shan@sciatl.com All other Asia-Pacific countries & Australia Hong Kong Telephone: 852-2588-4746 Fax: 852-2588-3139 E-mail: support.apr@sciatl.com Brazil Brazil For Technical Support, call: Telephone: 55-11-3845-9154 ext 230 Fax: 55-11-3845-2514 For Customer Service or to request an RMA number, call: Telephone: 55-11-3845-9154, ext 109 Fax: 55-11-3845-2514 E-mail: luiz.fattinger@sciatl.com 4006062 Rev B 7 For Information Region Centers Telephone and Fax Numbers Mexico, Central America, Caribbean Mexico For Technical Support, call: Telephone: 52-3515152599 Fax: 52-3515152599 For Customer Service or to request an RMA number, call: Telephone: 52-55-50-81-8425 Fax: 52-55-52-61-0893 E-mail: karla.lugo@sciatl.com All other Latin America countries Argentina For Technical Support, call: Telephone: 54-23-20-403340 ext 109 Fax: 54-23-20-403340 ext 103 For Customer Service or to request an RMA number, call: Telephone: 770-236-5662 Fax: 770-236-5888 E-mail: veda.keillor@sciatl.com 8 4006062 Rev B 5030 Sugarloaf Parkway, Box 465447 Lawrenceville, GA 30042 678.277.1000 Cisco, Cisco Systems, the Cisco logo, the Cisco Systems logo, MediaCenter, Prisma, and PrismaView are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. All other trademarks mentioned in this document are the property of their respective owners. Product and service availability are subject to change without notice. © 2009 Cisco Systems, Inc. All rights reserved. Printed in United States of America March 2009 Part Number 4006062 Rev B
