ITU-T SG11 Brain Storming on NGN: Future Directions for Control protocols Alain Le Roux Geneva, 14 November 2002 -1- Potential new areas of activities • WP1 (services and application requirements & control protocols) – Multi-media related Network control requirements – NGN control architecture (functional decomposition) – NGN interfaces & control protocols (APIs, SIP …) • WP2 (call/session and resource control requirements) – Resource and QoS control functions • WP3 (signalling/control protocols) – Protocol selection and profile for call/session/bearer (SIP, MPLS, RSVP, COPS …) – Call/bearer control protocol interactions & interworking • WP4 (transport of control protocols) – Signalling transport architecture and protocol profiles (e.g. based on SIGTRAN RFCs) -2- illustration of Scope of Control Architecture & Protocols in SG11 Service & Application Control (Servers) User authentication & Service profile control Scope ITU-T SG11 2 1 Session (or call) control (Call Agents) Resource control & Traffic policing 2 E.g. BICC, H323, SIP, SIP-T/SIP-GTD 3 3 e.g. H248 4 Bearer control (Switch/Routing) E.g. ATM sig, MPLS/RSVP ... 5 (UNI) Transport (xDSL/GbE/SDH/ DWDM/Optical) Per Session Control Protocols: • Session (call): 1 • Service/Application: 2 • Resources allocation & traffic policy control: 2, 3 6 (NNI) Transport resource control: 5 (UNI) • Bearer/Connection control: 4 • Backbone resource control: 5, 6 E.g. GMPLS with RSVP-TE or CR-LDP, or Optical-PNNI -3- Next steps ... • Confirmation of SG11 as the UIT-T study group lead on Network Control Architectures & Protocols – legacy and emerging ones for NGN architectures • Initiation of a SG11 ‘N2CAP’ project – Part of the NGN 2004 SG13 coordinated Project • Organise its preparation & launch – e-mail activity (moderated by the Project coordinator) • Impacts on the SG11 Questions and Structure – SG11 Questions update – SG11 structure adjustments possibly needed -4-