Three-Axis Accelerometer
Evaluation Board
EVAL-ADXL330Z
ST
DESCRIPTION
VS
16
C1
0.1µF
15
14
13
1
12
2
EVAL-ADXL330Z
11
3
TOP VIEW
(Not to Scale)
10
4
9
The EVAL-ADXL330Z is 20 mm × 20 mm with mounting holes
set 15 mm × 15 mm at the corners of the PCB.
5
6
7
X
Y
C2
0.1µF
C3
0.1µF
8
Z
C4
0.1µF
COM
CIRCUIT DESCRIPTION
06068-001
The EVAL-ADXL330Z is a simple evaluation board that allows
quick evaluation of the performance of the ADXL330 dual-axis
accelerometer. The EVAL-ADXL330Z has a 5-pin, 0.1 inch
spaced header for access to all power and signal lines that the
user can attach to a prototyping board (breadboard) or wire
using a standard plug. Four holes are provided for mechanical
attachment of the EVAL-ADXL330Z to the application.
Figure 1. EVAL-ADXL330Z Schematic
X
C3
+v
C1
C4
SPECIAL NOTES ON HANDLING
Y
COM
The EVAL-ADXL330Z is not reverse polarity protected.
Reversing the +V supply and ground pins can cause damage to
the ADXL330.
Z
C2
330JCP
06068-002
The part layout of the EVAL-ADXL330Z is shown in Figure 2.
The EVAL-ADXL330Z has three factory installed 100 nF
capacitors (C2, C3, and C4) at XOUT, YOUT, and ZOUT to reduce
the bandwidth to 50 Hz. Many applications require a different
bandwidth, in which case, the user can change C2, C3, and C4
as appropriate.
ADXL330EB
EVAL-ADXL330Z
ST
The schematic of the EVAL-ADXL330Z is shown in Figure 1.
Analog bandwidth can be set by changing Capacitors C2, C3,
and C4. See the ADXL330 data sheet for a complete description
of the operation of the accelerometer.
Figure 2. EVAL-ADXL330Z Physical Layout
Dropping the EVAL-ADXL330Z on a hard surface can generate
several thousand g of acceleration and might exceed the data
sheet absolute maximum limits. See the ADXL330 data sheet
for more information.
ORDERING GUIDE
Model
EVAL-ADXL330Z 1
1
Package Description
Evaluation Board
Z = Pb-free part.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2006 Analog Devices, Inc. All rights reserved.
EVAL-ADXL330Z
NOTES
©2006 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
EB06068-0-7/06(0)
Rev. 0 | Page 2 of 2