C250
Particulate Respirator N95
NIOSH Approved: N95
At least 95% filtration efficiency against solid
and liquid aerosols that do not contain oil.
DISPOSABLE RESPIRATORS
DIFFERS FROM GAS MAK
u DO NOT USE THE DISPOSABLE RESPORATORS FOR ANY
.OF THE PURPOSES LISTED BELOW!!
User Instructions
1.Failure to follow all instructions and limitations on
the use of this respirator and/or failure to wear this
respirator during all times of exposure can reduce
respirator effectiveness and may result in sickness or
death.
2. Before occupational use of this respirator, a written
respiratory protection program must be implemented
meeting all the requirements of OSHA 29 CFR
1910.134 such as training, fit testing, medical
evaluation, and applicable OSHA substance specific
standards
3. The particles which can be dangerous to your health
include those so small that you cannot see them.
4. Leave the contaminated area immediately and
contact supervisor if dizziness, irritation, or other
distress occurs.
5. Store the respirator away from contaminated areas
when not in use.
6. Inspect respirator before each use to ensure that it
is in good operating condition. Examine all the
respirator parts for signs of damage. The respirator
should be disposed of immediately upon observation
of damaged or missing parts. Filtering facepieces are
to be inspected prior to each use to assure there are
no holes in the breathing zone other than the
punctures around staples and no damage has
occurred. Enlarged holes resulting from ripped or
3 torn filter material around staple punctures are
considered damage. Immediately replace respirator if
damaged. Staple perforations do not affect NIOSH
approval.
7. Dispose of used product in accordance with
applicable regulations
u Do not use for gases and vapors, oil
aerosols, asbestos, or sandblasting;
particulate concentrations that exceed
either 10 times the occupational
exposure limit or applicable government
regulations, whichever is lower.
u do not use when OSHA substance
specific standards, such as those for,
arsenic, cadmium, lead in the
construction industry, or 4,4’-methylene
dianiline (MDA), specify other types of
respiratory protection.
u This respirator does not supply oxygen.
u For protection in dusty areas where the
concentration of oxygen level is
undermined or below 19.5%.
Use Limitations
1. This respirator does not supply oxygen. Do not use in atmospheres containing less than
19.5% oxygen.
2. Do not use when concentrations of contaminants are immediately dangerous to life or
health, are unknown or when concentrations exceed 10 times the permissible exposure limit
(PEL) or according to specific OSHA standards or applicable government regulations,
whichever is lower.
3. Do not alter, abuse, wash or misuse this respirator.
4. Do not use with beards or other facial hair or other conditions that prevent a good seal
between the face and the sealing surface of the respirator.
5. Respirators can help protect your lungs against certain airborne contaminants, however,
they will not prevent entry through other routes such as the skin, which would require
additional personal protective equipment (PPE).
6. This respirator is designed for occupational/professional use by adults who are properly
trained in their use and limitations. This respirator is not designed to be used by children.
7. Individuals with a compromised respiratory system, such as asthma or emphysema, should
consult a physician and complete a medical evaluation prior to use.
8. When stored in accordance with temperature and humidity conditions specified below, the
product may be used until the “use by” state specified on packaging.
FITTING INSTRUCTIONS
①
②
③
④
Please the mask on your hand with the nose clip at your fingertips,
allowing the head attachment string to hang freely Then position the
lower part of the mask under your chin, and the upper part over the
nose.
With the mask over the chin, mouth and the nose, pull the bottom
head string over and back of your head and below the ears. Pull the
top head string over the top and back your head and above the ears.
Using both hands, mold the nose area to the shape of your nose by
pushing inward while moving your fingertips down both sides of the
nose clip.
To ensure that you have a snug and leak-proof fit, place both hands
over the mask and exhale strongly. If the air leaks around the edges,
readjust the nose clip and the mask around the edges, and check for
air leakage again.
Removal Instructions
Cup respirator in hand to maintain position on face and pull
bottom string over head.
Still holding the respirator in position, pull top string over head
and remove respirator.
Use for
u Particles such as those from grinding, sanding, sweeping, sawing,
bagging, or processing minerals, coal, iron ore, flour, metal, wood,
pollen, and certain other substances. Liquid or non-oil based particles
from sprays that do not also emit oil aerosols or vapors.
Storage Condition and Shelf life
Before use, store respirators in the original packaging, away from
contaminated areas, dust, sunlight, extreme
temperatures, excessive moisture and damaging chemicals. When
stored in accordance with temperature and
humidity conditions specified below, the product may be used until
the “use by” date specified on
packaging. Always inspect product and conduct a user seal check
before use as specified in User
Instructions.
.
If you cannot achieve a proper seal, do not use the respirator
DISPOSABLE AND EXCHANGE
OF A DISPOSABLE RESPIRATORS
1.
2.
3.
Do not use, if you find any discolorations.
Do not use, if the mask loses it’s elasticity thru age.
Do not use, of the exhaust orifice is found to be
defective.
Please note :
u For an unused mask that is found to be defective, the Period of Validity
of exchange / refund is within the two years from the date manufacture, as
marked on the mask.
u The model, certification NO., and the date of manufacture is marked on
the mask, and on the box.
u Validity : for 2 years from manufacturing date.
uStorage Temperature Range: -20℃(-4°F) to +30℃(+86°F)
uStorage Maximum Relative Humidity <80% RH
Manufacturing Date